Surface terminations control charge transfer from bulk to surface states in topological insulators.

Topological insulators (TI) hold significant potential for various electronic and optoelectronic devices that rely on the Dirac surface state (DSS), including spintronic and thermoelectric devices, as well as terahertz detectors. The behavior of electrons within the DSS plays a pivotal role in the performance of such devices. It is expected that DSS appear on a surface of three dimensional(3D) TI by mechanical exfoliation. However, it is not always the case that the surface terminating atomic configuration and corresponding band structures are homogeneous. In order to investigate the impact of surface terminating atomic configurations on electron dynamics, we meticulously examined the electron dynamics at the exfoliated surface of a crystalline 3D TI (Bi 2 Se 3 ) with time, space, and energy resolutions. Based on our comprehensive band structure calculations, we found that on one of the Se-terminated surfaces, DSS is located within the bulk band gap, with no other surface states manifesting within this region. On this particular surface, photoexcited electrons within the conduction band effectively relax towards DSS and tend to linger at the Dirac point for extended periods of time. It is worth emphasizing that these distinct characteristics of DSS are exclusively observed on this particular surface.

Inverse-Perovskite Ba3 BO (B = Si and Ge) as a High Performance Environmentally Benign Thermoelectric Material with Low Lattice Thermal Conductivity.

High energy-conversion efficiency (ZT) of thermoelectric materials has been achieved in heavy metal chalcogenides, but the use of toxic Pb or Te is an obstacle for wide applications of thermoelectricity. Here, high ZT is demonstrated in toxic-element free Ba3 BO (B = Si and Ge) with inverse-perovskite structure. The negatively charged B ion contributes to hole transport with long carrier life time, and their highly dispersive bands with multiple valley degeneracy realize both high p-type electronic conductivity and high Seebeck coefficient, resulting in high power factor (PF). In addition, extremely low lattice thermal conductivities (κlat ) 1.0-0.4 W m-1  K-1 at T = 300-600 K are observed in Ba3 BO. Highly distorted O-Ba6 octahedral framework with weak ionic bonds between Ba with large mass and O provides low phonon velocities and strong phonon scattering in Ba3 BO. As a consequence of high PF and low κlat , Ba3 SiO (Ba3 GeO) exhibits rather high ZT = 0.16-0.84 (0.35-0.65) at T = 300-623 K (300-523 K). Finally, based on first-principles carrier and phonon transport calculations, maximum ZT is predicted to be 2.14 for Ba3 SiO and 1.21 for Ba3 GeO at T = 600 K by optimizing hole concentration. Present results propose that inverse-perovskites would be a new platform of environmentally-benign high-ZT thermoelectric materials.

Two-dimensional heavy fermion in a monoatomic-layer Kondo lattice YbCu2.

The Kondo effect between localized f-electrons and conductive carriers leads to exotic physical phenomena. Among them, heavy-fermion (HF) systems, in which massive effective carriers appear due to the Kondo effect, have fascinated many researchers. Dimensionality is also an important characteristic of the HF system, especially because it is strongly related to quantum criticality. However, the realization of the perfect two-dimensional (2D) HF materials is still a challenging topic. Here, we report the surface electronic structure of the monoatomic-layer Kondo lattice YbCu2 on a Cu(111) surface observed by synchrotron-based angle-resolved photoemission spectroscopy. The 2D conducting band and the Yb 4f state, located very close to the Fermi level, are observed. These bands are hybridized at low-temperature, forming the 2D HF state, with an evaluated coherence temperature of about 30 K. The effective mass of the 2D state is enhanced by a factor of 100 by the development of the HF state. Furthermore, clear evidence of the hybridization gap formation in the temperature dependence of the Kondo-resonance peak has been observed below the coherence temperature. Our study provides a new candidate as an ideal 2D HF material for understanding the Kondo effect at low dimensions.

Large Perpendicular Magnetic Anisotropy Induced by an Intersite Charge Transfer in Strained EuVO2H Films.

Perovskite oxides ABO3 continue to be a major focus in materials science. Of particular interest is the interplay between A and B cations as exemplified by intersite charge transfer (ICT), which causes novel phenomena including negative thermal expansion and metal-insulator transition. However, the ICT properties were achieved and optimized by cationic substitution or ordering. Here we demonstrate an anionic approach to induce ICT using an oxyhydride perovskite, EuVO2H, which has alternating layers of EuH and VO2. A bulk EuVO2H behaves as a ferromagnetic insulator with a relatively high transition temperature (TC) of 10 K. However, the application of external pressure to the EuIIVIIIO2H bulk or compressive strain from the substrate in the thin films induces ICT from the EuIIH layer to the VIIIO2 layer due to the extended empty V dxy orbital. The ICT phenomenon causes the VO2 layer to become conductive, leading to an increase in TC that is dependent on the number of carriers in the dxy orbitals (up to a factor of 4 for 10 nm thin films). In addition, a large perpendicular magnetic anisotropy appears with the ICT for the films of <100 nm, which is unprecedented in materials with orbital-free Eu2+, opening new perspectives for applications. The present results provide opportunities for the acquisition of novel functions by alternating transition metal/rare earth layers with heteroanions.

Berry curvature contributions of kagome-lattice fragments in amorphous Fe-Sn thin films.

Amorphous semiconductors are widely applied to electronic and energy-conversion devices owing to their high performance and simple fabrication processes. The topological concept of the Berry curvature is generally ill-defined in amorphous solids, due to the absence of long-range crystalline order. Here, we demonstrate that the Berry curvature in the short-range crystalline order of kagome-lattice fragments effectively contributes to the anomalous electrical and magneto-thermoelectric properties in Fe-Sn amorphous films. The Fe-Sn films on glass substrates exhibit large anomalous Hall and Nernst effects comparable to those of the single crystals of topological semimetals Fe3Sn2 and Fe3Sn. With modelling, we reveal that the Berry curvature contribution in the amorphous state likely originates from randomly distributed kagome-lattice fragments. This microscopic interpretation sheds light on the topology of amorphous materials, which may lead to the realization of functional topological amorphous electronic devices.

Direct Imaging of Band Structure for Powdered Rhombohedral Boron Monosulfide by Microfocused ARPES.

Boron-based two-dimensional (2D) materials are an excellent platform for nanoelectronics applications. Rhombohedral boron monosulfide (r-BS) is attracting particular attention because of its unique layered crystal structure suitable for exploring various functional properties originating in the 2D nature. However, studies to elucidate its fundamental electronic states have been largely limited because only tiny powdered crystals were available, hindering a precise investigation by spectroscopy such as angle-resolved photoemission spectroscopy (ARPES). Here we report the direct mapping of the band structure with a tiny (∼20 × 20 µm2) r-BS powder crystal by utilizing microfocused ARPES. We found that r-BS is a p-type semiconductor with a band gap of >0.5 eV characterized by the anisotropic in-plane effective mass. The present results demonstrate the high applicability of micro-ARPES to tiny powder crystals and widen an opportunity to access the yet-unexplored electronic states of various novel materials.

Fermiology and Origin of T_{c} Enhancement in a Kagome Superconductor Cs(V_{1-x}Nb_{x})_{3}Sb_{5}.

Kagome metals AV_{3}Sb_{5} (A=K, Rb, and Cs) exhibit a characteristic superconducting ground state coexisting with a charge density wave (CDW), whereas the mechanisms of the superconductivity and CDW have yet to be clarified. Here we report a systematic angle-resolved photoemission spectroscopy (ARPES) study of Cs(V_{1-x}Nb_{x})_{3}Sb_{5} as a function of Nb content x, where isovalent Nb substitution causes an enhancement of superconducting transition temperature (T_{c}) and the reduction of CDW temperature (T_{CDW}). We found that the Nb substitution shifts the Sb-derived electron band at the Γ point downward and simultaneously moves the V-derived band around the M point upward to lift up the saddle point (SP) away from the Fermi level, leading to the reduction of the CDW-gap magnitude and T_{CDW}. This indicates a primary role of the SP density of states to stabilize the CDW. The present result also suggests that the enhancement of superconductivity by Nb substitution is caused by the cooperation between the expansion of the Sb-derived electron pocket and the recovery of the V-derived density of states at the Fermi level.

Giant spin-to-charge conversion at an all-epitaxial single-crystal-oxide Rashba interface with a strongly correlated metal interlayer.

The two-dimensional electron gas (2DEG) formed at interfaces between SrTiO3 (STO) and other oxide insulating layers is promising for use in efficient spin-charge conversion due to the large Rashba spin-orbit interaction (RSOI). However, these insulating layers on STO prevent the propagation of a spin current injected from an adjacent ferromagnetic layer. Moreover, the mechanism of the spin-current flow in these insulating layers is still unexplored. Here, using a strongly correlated polar-metal LaTiO3+δ (LTO) interlayer and the 2DEG formed at the LTO/STO interface in an all-epitaxial heterostructure, we demonstrate giant spin-to-charge current conversion efficiencies, up to ~190 nm, using spin-pumping ferromagnetic-resonance voltage measurements. This value is the highest among those reported for all materials, including spin Hall systems. Our results suggest that the strong on-site Coulomb repulsion in LTO and the giant RSOI of LTO/STO may be the key to efficient spin-charge conversion with suppressed spin-flip scattering. Our findings highlight the hidden inherent possibilities of oxide interfaces for spin-orbitronics applications.

Design, Synthesis, and Optoelectronic Properties of the High-Purity Phase in Layered AETMN2 (AE = Sr, Ba; TM = Ti, Zr, Hf) Semiconductors.

We report the synthesis and optoelectronic properties of high phase-purity (>94 mol %) bulk polycrystals of KCoO2-type layered nitrides AETMN2 (AE = Sr, Ba; and TM = Ti, Zr, Hf), which are expected to exhibit unique electron transport properties originating from their natural two-dimensional (2D) electronic structure, but high-purity intrinsic samples have yet been reported. The bulks were synthesized using a solid-state reaction between AENH and TMN precursors with NaN3 to achieve high N chemical potential during the reaction. The AETMN2 bulks are n-type semiconductors with optical band gaps of 1.63 eV for SrTiN2, 1.97 eV for BaZrN2, and 2.17 eV for BaHfN2. SrTiN2 and BaZrN2 bulks show degenerated electron conduction due to the natural high-density electron doping and paramagnetic behavior in all of the temperature ranges examined, while such unintentional carrier generation is largely suppressed in BaHfN2, which exhibits nondegenerated electron conduction. The BaHfN2 sample also exhibits weak ferromagnetic behavior at temperatures lower than 35 K. Density functional theory calculations suggest that the high-density electron carriers in SrTiN2 come from oxygen impurity substitution at the N site (ON) acting as a shallow donor even if the high-N chemical potential synthesis conditions are employed. On the other hand, the formation energy of ON becomes larger in BaHfN2 because of the stronger TM-N chemical bonds. Present results demonstrate that the easiness of impurity incorporation is designed by density functional calculations to produce a more intrinsic semiconductor in wider chemical conditions, opening a way to cultivating novel functional materials that are sensitive to atmospheric impurities and defects.

Development of a versatile micro-focused angle-resolved photoemission spectroscopy system with Kirkpatrick-Baez mirror optics.

Angle-resolved photoemission spectroscopy using a micro-focused beam spot [micro-angle-resolved photoemission spectroscopy (ARPES)] is becoming a powerful tool to elucidate key electronic states of exotic quantum materials. We have developed a versatile micro-ARPES system based on the synchrotron radiation beam focused with a Kirkpatrick-Baez mirror optics. The mirrors are monolithically installed on a stage, which is driven with five-axis motion, and are vibrationally separated from the ARPES measurement system. Spatial mapping of the Au photolithography pattern on Si signifies the beam spot size of 10 µm (horizontal) × 12 µm (vertical) at the sample position, which is well suited to resolve the fine structure in local electronic states. Utilization of the micro-beam and the high precision sample motion system enables the accurate spatially resolved band-structure mapping, as demonstrated by the observation of a small band anomaly associated with tiny sample bending near the edge of a cleaved topological insulator single crystal.

High-Mobility Metastable Rock-Salt Type (Sn,Ca)Se Thin Film Stabilized by Direct Epitaxial Growth on a YSZ (111) Single-Crystal Substrate.

Metastable cubic (Sn1-xPbx)Se with x ≥ 0.5 is expected to be a high mobility semiconductor due to its Dirac-like electronic state, but it has an excessively high carrier concentration of ∼1019 cm-3 and is not suitable for semiconductor device applications such as thin film transistors and solar cells. Further, thin films of (Sn1-xPbx)Se require a complicated synthesis process because of the high vapor pressure of Pb. We herein report the direct growth of metastable cubic (Sn1-xCax)Se films alloyed with CaSe, which has a wider bandgap and lower vapor pressure than PbSe. The cubic (Sn1-xCax)Se epitaxial films with x = 0.4-0.8 are stabilized on YSZ (111) single crystalline substrates by pulsed laser deposition. (Sn1-xCax)Se has a direct-transition-type bandgap, and the bandgap energy can be varied from 1.4 eV (x = 0.4) to 2.0 eV (x = 0.8) by changing x. These films with x = 0.4-0.6 show p-type conduction with low hole carrier concentrations of ∼1017 cm-3. Hall mobility analysis suggests that the hole transport would be dominated by 180° rotational domain structures, which is specific to (111) oriented epitaxial films. However, it, in turn, clarifies that the in-grain carrier mobility in the (Sn0.6Ca0.4)Se film is as high as 322 cm2/(Vs), which is much higher than those in thermodynamically stable layered SnSe and other Sn-based layered semiconductor films at room temperature. Therefore, the present results prove the potential of high mobility (Sn1-xCax)Se films for semiconductor device applications via a simple thin-film deposition process.

Dirac semimetal phase and switching of band inversion in XMg2Bi2 (X = Ba and Sr).

Topological Dirac semimetals (TDSs) offer an excellent opportunity to realize outstanding physical properties distinct from those of topological insulators. Since TDSs verified so far have their own problems such as high reactivity in the atmosphere and difficulty in controlling topological phases via chemical substitution, it is highly desirable to find a new material platform of TDSs. By angle-resolved photoemission spectroscopy combined with first-principles band-structure calculations, we show that ternary compound BaMg2Bi2 is a TDS with a simple Dirac-band crossing around the Brillouin-zone center protected by the C3 symmetry of crystal. We also found that isostructural SrMg2Bi2 is an ordinary insulator characterized by the absence of band inversion due to the reduction of spin-orbit coupling. Thus, XMg2Bi2 (X = Sr, Ba, etc.) serves as a useful platform to study the interplay among crystal symmetry, spin-orbit coupling, and topological phase transition around the TDS phase.

Imaging the itinerant-to-localized transmutation of electrons across the metal-to-insulator transition in V2O3.

In solids, strong repulsion between electrons can inhibit their movement and result in a "Mott" metal-to-insulator transition (MIT), a fundamental phenomenon whose understanding has remained a challenge for over 50 years. A key issue is how the wave-like itinerant electrons change into a localized-like state due to increased interactions. However, observing the MIT in terms of the energy- and momentum-resolved electronic structure of the system, the only direct way to probe both itinerant and localized states, has been elusive. Here we show, using angle-resolved photoemission spectroscopy (ARPES), that in V2O3, the temperature-induced MIT is characterized by the progressive disappearance of its itinerant conduction band, without any change in its energy-momentum dispersion, and the simultaneous shift to larger binding energies of a quasi-localized state initially located near the Fermi level.

Large phonon drag thermopower boosted by massive electrons and phonon leaking in LaAlO3/LaNiO3/LaAlO3 heterostructure.

An unusually large thermopower (S) enhancement is induced by heterostructuring thin films of the strongly correlated electron oxide LaNiO3. The phonon-drag effect, which is not observed in bulk LaNiO3, enhances S for thin films compressively strained by LaAlO3 substrates. By a reduction in the layer thickness down to three unit cells and subsequent LaAlO3 surface termination, a 10 times S enhancement over the bulk value is observed due to large phonon drag S (Sg), and the Sg contribution to the total S occurs over a much wider temperature range up to 220 K. The Sg enhancement originates from the coupling of lattice vibration to the d electrons with large effective mass in the compressively strained ultrathin LaNiO3, and the electron-phonon interaction is largely enhanced by the phonon leakage from the LaAlO3 substrate and the capping layer. The transition-metal oxide heterostructures emerge as a new playground to manipulate electronic and phononic properties in the quest for high-performance thermoelectrics.

Bipolar Semiconducting Properties in α-SnWO4 Based on the Characteristic Defect Structure.

Diodes, memories, logic circuits, and most other current information technologies rely on the combined use of p- and n-type semiconductors. Although oxide semiconductors have many technologically attractive functionalities, such as transparency and high dopability to enable their use as conducting films, they typically lack bipolar conductivity. In particular, the absence of p-type semiconducting properties owing to the innate electronic structures of oxides represents a bottleneck for the development of practical devices. Here, bipolar semiconducting properties are demonstrated in α-SnWO4 within a 100 °C temperature window after appropriate thermal treatment. Comprehensive spectroscopic observations reveal that Sn4+ is present in p-type α-SnWO4 in a notably greater quantity than in n-type. This result strongly suggests that the Sn4+ substitutional defects on the W6+ sites contribute to hole-carrier generation in α-SnWO4. We also find that oxygen vacancies are initially formed in Sn-O-W bonds and migrate to W-O-W bonds with changes in semiconducting properties from p-type to n-type. These findings suggest useful strategies for exploring p-type oxide semiconductors and controlling their carrier type by utilizing the octahedral structure.

High-Quality Few-Layer Graphene on Single-Crystalline SiC thin Film Grown on Affordable Wafer for Device Applications.

Graphene is promising for next-generation devices. However, one of the primary challenges in realizing these devices is the scalable growth of high-quality few-layer graphene (FLG) on device-type wafers; it is difficult to do so while balancing both quality and affordability. High-quality graphene is grown on expensive SiC bulk crystals, while graphene on SiC thin films grown on Si substrates (GOS) exhibits low quality but affordable cost. We propose a new method for the growth of high-quality FLG on a new template named "hybrid SiC". The hybrid SiC is produced by bonding a SiC bulk crystal with an affordable device-type wafer and subsequently peeling off the SiC bulk crystal to obtain a single-crystalline SiC thin film on the wafer. The quality of FLG on this hybrid SiC is comparable to that of FLG on SiC bulk crystals and much higher than of GOS. FLG on the hybrid SiC exhibited high carrier mobilities, comparable to those on SiC bulk crystals, as anticipated from the linear band dispersions. Transistors using FLG on the hybrid SiC showed the potential to operate in terahertz frequencies. The proposed method is suited for growing high-quality FLG on desired substrates with the aim of realizing graphene-based high-speed devices.

Thickness-induced metal to insulator transition in Ru nanosheets probed by photoemission spectroscopy: Effects of disorder and Coulomb interaction.

We investigated the electronic structures of mono- and few-layered Ru nanosheets (N layers (L) with N = 1, ~6, and ~9) on Si substrate by ultra-violet and x-ray photoemission spectroscopies. The spectral density of states (DOS) near EF of ~6 L and 1 L is suppressed as it approaches EF in contrast to that of ~9 L, which is consistent with the Ru 3 d core-level shift indicating the reduction of the metallic conductivity. A power law g(ε) ∝ |ε - εF|α well reproduces the observed spectral DOS of ~6 L and 1 L. The evolution of the power factor α suggests that the transition from the metallic state of ~9 L to the 2-dimensional insulating state with the soft Coulomb gap of 1 L through the disordered 3-dimensional metallic state of ~6 L.

Natural van der Waals heterostructural single crystals with both magnetic and topological properties.

Heterostructures having both magnetism and topology are promising materials for the realization of exotic topological quantum states while challenging in synthesis and engineering. Here, we report natural magnetic van der Waals heterostructures of (MnBi2Te4) m (Bi2Te3) n that exhibit controllable magnetic properties while maintaining their topological surface states. The interlayer antiferromagnetic exchange coupling is gradually weakened as the separation of magnetic layers increases, and an anomalous Hall effect that is well coupled with magnetization and shows ferromagnetic hysteresis was observed below 5 K. The obtained homogeneous heterostructure with atomically sharp interface and intrinsic magnetic properties will be an ideal platform for studying the quantum anomalous Hall effect, axion insulator states, and the topological magnetoelectric effect.

In-gap state generated by La-on-Sr substitutional defects within the bulk of SrTiO3.

Local distortion in the conduction pathway has a significant influence on the conducting properties of oxides. The electronic states induced in the band gap of SrTiO3 by La doping were investigated using photoemission spectroscopy (PES) and soft X-ray emission spectroscopy (SXES); moreover, the local distortion in the conduction pathway was examined using extended X-ray absorption fine structure (EXAFS). An itinerant state and a localized state were observed as a metallic state and an in-gap state, respectively, in the PES spectra and as inelastic peaks in the SXES spectra. This implied that the itinerant state and the in-gap state coexisted within the bulk. From EXAFS results, it was observed that La doped into SrTiO3 substituted Sr and locally distorted the conduction pathway. The results showed that some electrons doped by La-on-Sr substitution are trapped/localized by the local distortion in the conduction pathway, whereas the remaining doped electrons itinerate in the pristine conduction pathway with no distortion.

Non-trivial surface states of samarium hexaboride at the (111) surface.

The peculiar metallic electronic states observed in the Kondo insulator, samarium hexaboride (SmB6), has stimulated considerable attention among those studying non-trivial electronic phenomena. However, experimental studies of these states have led to controversial conclusions mainly due to the difficulty and inhomogeneity of the SmB6 crystal surface. Here, we show the detailed electronic structure of SmB6 with angle-resolved photoelectron spectroscopy measurements of the three-fold (111) surface where only two inequivalent time-reversal-invariant momenta (TRIM) exist. We observe the metallic two-dimensional state was dispersed across the bulk Kondo gap. Its helical in-plane spin polarisation around the surface TRIM indicates that SmB6 is topologically non-trivial, according to the topological classification theory for weakly correlated systems. Based on these results, we propose a simple picture of the controversial topological classification of SmB6.