RESUMEN
We report a new nickel hydroxyfluoride diaspore Ni(OH)F prepared using hydrothermal synthesis from NiCl2·6H2O and NaF. Magnetic characterization reveals that, contrary to other reported transition-metal hydroxyfluoride diaspores, Ni(OH)F displays weak ferromagnetism below the magnetic ordering temperature. To understand this difference, neutron diffraction is used to determine the long-range magnetic structure. The magnetic structure is found to be distinct from those reported for other hydroxyfluoride diaspores and shows an antiferromagnetic spin ordering in which ferromagnetic canting is allowed by symmetry. Furthermore, neutron powder diffraction on a deuterated sample, Ni(OD)F, reveals partial anion ordering that is distinctive to what has previously been reported for Co(OH)F and Fe(OH)F. Density functional theory calculations show that OH/F ordering can have a directing influence on the lowest energy magnetic ground state. Our results point toward a subtle interplay between the sign of magnetic exchange interactions, the electronic configuration, and anion disordering.
RESUMEN
A Mn2+-Li-Nb disordered rock-salt oxide cathode is prepared by a solid-state reaction under 5% H2/N2, and its electrochemical property shows a high voltage plateau at 4.8 V, with irreversible structural changes in the 1st cycle due to O redox processes; this is supported by powder X-ray diffraction and ex situ laboratory Mn K-edge XANES data.
RESUMEN
Efficient artificial photosynthesis systems are currently realized as catalyst- and surface-functionalized photovoltaic tandem-and triple-junction devices, enabling photoelectrochemical (PEC) water oxidation while simultaneously recycling CO2 and generating hydrogen as a solar fuel for storable renewable energy. Although PEC systems also bear advantages for the activation of dinitrogen - such as a high system tunability with respect to the electrocatalyst integration and a directly controllable electron flux to the anchoring catalyst through the adjustability of incoming irradiation - only a few PEC devices have been developed and investigated for this purpose. We have developed a series of photoelectrodeposition procedures to deposit mixed-metal electrocatalyst nanostructures directly on the semiconductor surface for light-assisted dinitrogen activation. These electrocatalyst compositions containing Co, Mo and Ru in different atomic ratios follow previously made recommendations of metal compositions for dinitrogen reduction and exhibit different physical properties. XPS studies of the photoelectrode surfaces reveal that our electrocatalyst films are to a large degree nitrogen-free after their fabrication, which is generally difficult to achieve with traditional magnetron sputtering or e-beam evaporation techniques. Initial chronoamperometric measurements of the p-InP photoelectrode coated with the Co-Mo alloy electrocatalyst show higher photocurrent densities in the presence of N2(g) than in the presence of Ar at -0.09 V vs. RHE. Indications of successful dinitrogen activation have also been found in consecutive XPS studies, where both N 1s and Mo 3d spectra reveal evidence of nitrogen-metal interactions.
RESUMEN
The crystallization of a new series of A-site substituted lanthanum ferrite materials (La1-xREx)FeO3 was explored by the hydrothermal method at 240 °C, for rare earth (RE) = Nd, Sm, Gd, Ho, Er, Yb, and Y, with 0 ≤ x ≤ 1. The effect of elemental substitution on the morphological, structural, and magnetic properties of the materials was studied using high-resolution powder X-ray diffraction, energy dispersive spectroscopy (EDS) on the scanning electron microscope, Raman spectroscopy, and SQUID magnetometry. If the radius of the La3+ and the substituent ions is similar, such as for Nd3+, Sm3+, and Gd3+, homogeneous solid solutions are formed, with the orthorhombic GdFeO3-type structure, and a continuous evolution of Raman spectra with composition and distinct magnetic behavior from the end members. When the radius difference between substituents and La3+ is large, such as for Ho3+, Er3+, Yb3+, and Y3+, then instead of forming solid solutions, crystallization in separate phases is found. However, low levels of element mixing are found and intergrowths of segregated regions give composite particles. In this case, the Raman spectra and magnetic behavior are characteristic of mixtures of phases, while EDS shows distinctive elemental segregation. A-site replacement induces an evolution in the crystallite shape with an increasing amount of substituent ions and this is most evident for RE = Y from cube-shaped crystals seen for LaFeO3 to multipodal crystals for (La1-xYx)FeO3, providing evidence for a phase-separation-driven evolution of morphology.
RESUMEN
The molecular titanium-oxo cluster [Ti6O6(OiPr)6(O2C t Bu)6] (1) can be photoactivated by UV light, resulting in a deeply coloured mixed valent (photoreduced) Ti (iii/iv) cluster, alongside alcohol and ketone (photooxidised) organic products. Mechanistic studies indicate that a two-electron (not free-radical) mechanism occurs in this process, which utilises the cluster structure to facilitate multielectron reactions. The photoreduced products [Ti6O6(OiPr)4(O2C t Bu)6(sol)2], sol = iPrOH (2) or pyridine (3), can be isolated in good yield and are structurally characterized, each with two, uniquely arranged, antiferromagnetically coupled d-electrons. 2 and 3 undergo onward oxidation under air, with 3 cleanly transforming into peroxide complex, [Ti6O6(OiPr)4(O2C t Bu)6(py)(O2)] (5). 5 reacts with isopropanol to regenerate the initial cluster (1) completing a closed cycle, and suggesting opportunities for the deployment of these easily made and tuneable clusters for sustainable photocatalytic processes using air and light. The redox reactivity described here is only possible in a cluster with multiple Ti sites, which can perform multi-electron processes and can adjust its shape to accommodate changes in electron density.
RESUMEN
The synthesis and crystal structure (100â K) of the title compound, [(CH3)2NH2][Fe(C10H11O2N3S)2], are reported. The asymmetric unit consists of an octahedral [FeIII(L)2]- fragment, where L2- is 3-ethoxysalicylaldehyde thiosemicarbazonate(2-), and a dimethylammonium cation. Each L2- ligand binds with the thiolate S, the imine N and the phenolate O atoms as donors, resulting in an FeIIIS2N2O2 chromophore. The ligands are orientated in two perpendicular planes, with the O and S atoms in cis positions, and mutually trans N atoms. The FeIII ion is in the high-spin state at 100â K. The variable-temperature magnetic susceptibility measurements (5-320â K) are consistent with the presence of a high-spin FeIII ion with D = 0.83â (1)â cm-1 and g = 2.
Asunto(s)
Compuestos Férricos , Hierro , Compuestos Férricos/química , Cristalografía por Rayos X , Enlace de Hidrógeno , Hierro/químicaRESUMEN
Straightforward procedures for the generation of rhodium(I) κCl-chlorocarbon complexes of the form [Rh(PONOP-tBu)(κ Cl-ClR)][BArF 4] [R = CH2Cl, A; Ph, 1; Cy, 2; tBu, 3; PONOP-tBu = 2,6-bis(di-tert-butylphosphinito)pyridine; ArF = 3,5-bis(trifluoromethyl)phenyl] in solution are described, enabling isolation of analytically pure A and crystallographic characterization of the new complexes 1 and 2. Complex 1 was found to be stable at ambient temperature, but prolonged heating in chlorobenzene at 125 °C resulted in formation of [Rh(PONOP-tBu)(Ph)Cl][BArF 4] 4 with experimental and literature evidence pointing toward a concerted C(sp2)-Cl bond oxidative addition mechanism. C(sp3)-Cl bond activation of dichloromethane, chlorocyclohexane, and 2-chloro-2-methylpropane by the rhodium(I) pincer occurred under considerably milder conditions, and radical mechanisms that commence with chloride atom abstraction and involve generation of the rhodium(II) metalloradical [Rh(PONOP-tBu)Cl][BArF 4] 6 are instead proposed. For dichloromethane, [Rh(PONOP-tBu)(CH2Cl)Cl][BArF 4] 5 was formed in the dark, but facile photo-induced reductive elimination occurred when exposed to light. Net dehydrochlorination affording [Rh(PONOP-tBu)(H)Cl][BArF 4] 7 and an alkene byproduct resulted for chlorocyclohexane and 2-chloro-2-methylpropane, consistent with hydrogen atom abstraction from the corresponding alkyl radicals by 6. This suggestion is supported by dynamic hydrogen atom transfer between 6 and 7 on the 1H NMR time scale at 298 K in the presence of TEMPO.
RESUMEN
We present the synthesis of a novel binary metal oxide material: Ba7Mn4O15. The crystal structure has been investigated by high-resolution powder synchrotron X-ray diffraction in the temperature range of 100-300 K as well as by powder neutron diffraction at 10 and 80 K. This material represents an isostructural barium-substituted analogue of the layered material Sr7Mn4O15 that forms its own structural class. However, we find that Ba7Mn4O15 adopts a distinct magnetic ordering, resulting in a magnetoelectric ground state below 50 K. The likely magnetoelectric coupling mechanisms have been inferred from performing a careful symmetry-adapted refinement against the powder neutron diffraction experiments, as well as by making a comparison with the nonmagnetoelectric ground state of Sr7Mn4O15.
RESUMEN
The synthesis and crystal structure (100â K) of the title compound, [Fe(C10H11BrN3OS)2]NO3·H2O, is reported. The asymmetric unit consists of an octahedral [FeIII(HL)2]+ cation, where HL- is H-5-Br-thsa-Et or 5-bromosalicylaldehyde 4-ethylthiosemicarbazonate(1-) {systematic name: 4-bromo-2-[(4-ethylthiosemicarbazidoidene)methyl]phenolate}, a nitrate anion and a noncoordinated water molecule. Each HL- ligand binds via the thione S, the imine N and the phenolate O atom, resulting in an FeIIIS2N2O2 chromophore. The ligands are orientated in two perpendicular planes, with the O and S atoms in cis and the N atoms in trans positions. This [Fe(HL)2](anion)·H2O compound contains the first known cationic FeIII entity containing two salicylaldehyde thiosemicarbazone derivatives. The FeIII ion is in the high-spin state at 100â K. In addition, a comparative IR spectroscopic study of the free ligand and the ferric complex is presented, demonstrating that such an analysis provides a quick identification of the degree of deprotonation and the coordination mode of the ligand in this class of metal compounds. The variable-temperature magnetic susceptibility measurements (5-320â K) are consistent with the presence of a high-spin FeIII ion with a zero-field splitting D = 0.439â (1)â cm-1.
RESUMEN
Magnetically induced hyperthermia has reached a milestone in medical nanoscience and in phase III clinical trials for cancer treatment. As it relies on the heat generated by magnetic nanoparticles (NPs) when exposed to an external alternating magnetic field, the heating ability of these NPs is of paramount importance, so is their synthesis. We present a simple and fast method to produce iron oxide nanostructures with excellent heating ability that are colloidally stable in water. A polyol process yielded biocompatible single core nanoparticles and nanoflowers. The effect of parameters such as the precursor concentration, polyol molecular weight as well as reaction time was studied, aiming to produce NPs with the highest possible heating rates. Polyacrylic acid facilitated the formation of excellent nanoheating agents iron oxide nanoflowers (IONFs) within 30 min. The progressive increase of the size of the NFs through applying a seeded growth approach resulted in outstanding enhancement of their heating efficiency with intrinsic loss parameter up to 8.49 nH m2 kgFe-1. The colloidal stability of the NFs was maintained when transferring to an aqueous solution via a simple ligand exchange protocol, replacing polyol ligands with biocompatible sodium tripolyphosphate to secure the IONPs long-term colloidal stabilization.
Asunto(s)
Calefacción , Nanopartículas Magnéticas de Óxido de Hierro/química , Resinas Acrílicas/química , Ligandos , Fenómenos Magnéticos , Tamaño de la Partícula , Polietilenglicoles/química , Polifosfatos/químicaRESUMEN
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMEN
The GaV4S8-ySey (y = 0 to 8) family of materials have been synthesized in both polycrystalline and single crystal form, and their structural and magnetic properties thoroughly investigated. Each of these materials crystallizes in the F[Formula: see text][Formula: see text]3m space group at ambient temperature. However, in contrast to the end members GaV4S8 and GaV4Se8, that undergo a structural transition to the R3m space group at 42 and 41 K respectively, the solid solutions (y = 1 to 7) retain cubic symmetry down to 1.5 K. In zero applied field the end members of the family order ferromagnetically at 13 K (GaV4S8) and 18 K (GaV4Se8), while the intermediate compounds exhibit a spin-glass-like ground state. We demonstrate that the magnetic structure of GaV4S8 shows localization of spins on the V cations, indicating that a charge ordering mechanism drives the structural phase transition. We conclude that the observation of both structural and ferromagnetic transitions in the end members of the series in zero field is a prerequisite for the stabilization of a skyrmion phase, and discuss how the absence of these transitions in the y = 1 to 7 materials can be explained by their structural properties.
RESUMEN
We present the results of torque magnetometry and magnetic susceptibility measurements to study in detail the spin reorientation transition (SRT) and magnetic anisotropy in the permanent magnet NdCo5. We further show simulations of the measurements using first-principles calculations based on density-functional theory and the disordered local moment picture of magnetism at finite temperatures. The good agreement between theory and experimental data leads to a detailed description of the physics underpinning the SRT. In particular we are able to resolve the magnetization of, and to reveal a canting between, the Nd and Co sublattices. The torque measurements carried out in the ac and ab planes near the easy direction allow us to estimate the anisotropy constants, K 1, K 2 and K 4 and their temperature dependences. Torque curves, τ(γ) recorded by varying the direction of a constant magnetic field in the crystallographic ac plane show a reversal in the polarity as the temperature is changed across the SRT (240 < T < 285 K). Within this domain, τ(γ) exhibits unusual features different to those observed above and below the transition. The single crystals of NdCo5 were grown using the optical floating zone technique.
RESUMEN
Iron is an essential element, and cornflake-style cereals are typically fortified with iron to a level up to 14 mg iron per 100 g. Even single cornflakes exhibit magnetic behaviour. We extracted iron microparticles from samples of two own-brand supermarket cornflakes using a strong permanent magnet. Synchrotron iron K-edge X-ray absorption near-edge spectroscopic data were consistent with identification as metallic iron, and X-ray diffraction studies provided unequivocal identification of the extracted iron as body-centred cubic (BCC) α-iron. Magnetometry measurements were also consistent with ca. 14 mg per 100 g BCC iron. These findings emphasise that attention must be paid to the speciation of trace elements, in relation to their bioavailability. To mimic conditions in the stomach, we suspended the iron extract in dilute HCl (pH 1.0-2.0) at 310 K (body temperature) and found by ICP-MS that over a period of 5 hours, up to 13% of the iron dissolved. This implies that despite its metallic form in the cornflakes, the iron is potentially bioavailable for oxidation and absorption into the body.
Asunto(s)
Grano Comestible/química , Hierro/metabolismo , Disponibilidad Biológica , Magnetometría , Oligoelementos/metabolismo , Espectroscopía de Absorción de Rayos X , Difracción de Rayos XRESUMEN
We present calculations and experimental measurements of the temperature-dependent magnetization of a single crystal of GdCo5 in magnetic fields of order 60 T. At zero temperature the calculations, based on density-functional theory in the disordered-local-moment picture, predict a field-induced transition from an antiferromagnetic to a canted alignment of Gd and Co moments at 46.1 T. At higher temperatures the calculations find this critical field to increase along with the zero-field magnetization. The experimental measurements observe this transition to occur between 44-48 T at 1.4 K. Up to temperatures of at least 100 K, the experiments continue to observe the transition; however, at variance with the calculations, no strong temperature dependence of the critical field is apparent. We assign this difference to the inaccurate description of the zero-field magnetization of the calculations at low temperatures, due to the use of classical statistical mechanics. Correcting for this effect, we recover a consistent description of the high-field magnetization of GdCo5 from theory and experiment.
RESUMEN
Magnetocrystalline anisotropy, the microscopic origin of permanent magnetism, is often explained in terms of ferromagnets. However, the best performing permanent magnets based on rare earths and transition metals (RE-TM) are in fact ferrimagnets, consisting of a number of magnetic sublattices. Here we show how a naive calculation of the magnetocrystalline anisotropy of the classic RE-TM ferrimagnet GdCo_{5} gives numbers that are too large at 0 K and exhibit the wrong temperature dependence. We solve this problem by introducing a first-principles approach to calculate temperature-dependent magnetization versus field (FPMVB) curves, mirroring the experiments actually used to determine the anisotropy. We pair our calculations with measurements on a recently grown single crystal of GdCo_{5}, and find excellent agreement. The FPMVB approach demonstrates a new level of sophistication in the use of first-principles calculations to understand RE-TM magnets.
RESUMEN
Large single crystals of pyrochlore [Formula: see text] were successfully grown by the floating zone technique using an optical furnace equipped with high power xenon arc lamps. Structural investigations were carried out via powder synchrotron x-ray and neutron diffraction to establish the crystallographic structure of the materials produced. The magnetic properties of the single crystals were determined for magnetic fields applied along different crystallographic axes. The results revealed that [Formula: see text] is an interesting material for further investigation as a frustrated magnet. The high quality of the crystals produced makes them ideal for detailed investigation, especially using neutron scattering techniques.
RESUMEN
A new barium ruthenium oxyhydroxide Ba4Ru3O10.2(OH)1.8 crystallises under hydrothermal conditions at 200 °C: powder neutron diffraction data show it adopts an 8H hexagonal perovskite structure with a new stacking sequence, while high resolution electron microscopy reveals regions of ordered layers of vacant Ru sites, and magnetometry shows antiferromagnetism with TN = 200(5) K.
RESUMEN
The specific targeting of cells to sites of tissue damage in vivo is a major challenge precluding the success of stem cell-based therapies. Magnetic particle-based targeting may provide a solution. Our aim was to provide a model system to study the trapping and potential targeting of human mesenchymal stem cells (MSCs) during in vitro fluid flow, which ultimately will inform cell targeting in vivo. In this system magnet arrays were used to trap superparamagnetic iron oxide particle-doped MSCs. The in vitro experiments demonstrated successful cell trapping, where the volume of cells trapped increased with magnetic particle concentration and decreased with increasing flow rate. Analysis of gene expression revealed significant increases in COL1A2 and SOX9. Using principles established in vitro, a proof-of-concept in vivo experiment demonstrated that magnetic particle-doped, luciferase-expressing MSCs were trapped by an implanted magnet in a subcutaneous wound model in nude mice. Our results demonstrate the effectiveness of using an in vitro model for testing superparamagnetic iron oxide particles to develop successful MSC targeting strategies during fluid flow, which ultimately can be translated to in vivo targeted delivery of cells via the circulation in a variety of tissue-repair models.
Asunto(s)
Dextranos/metabolismo , Fenómenos Magnéticos , Células Madre Mesenquimatosas/citología , Modelos Biológicos , Coloración y Etiquetado , Tejido Adiposo/citología , Adulto , Biomarcadores/metabolismo , Diferenciación Celular/genética , Condrogénesis/genética , Endocitosis , Regulación de la Expresión Génica , Humanos , Mediciones Luminiscentes , Nanopartículas de Magnetita , Masculino , Células Madre Mesenquimatosas/metabolismo , Osteogénesis/genética , ReologíaRESUMEN
Low-temperature (200 °C) hydrothermal synthesis of the ruthenium oxides Ca1.5 Ru2 O7 , SrRu2 O6 , and Ba2 Ru3 O9 (OH) is reported. Ca1.5 Ru2 O7 is a defective pyrochlore containing Ru(V/VI) ; SrRu2 O6 is a layered Ru(V) oxide with a PbSb2 O6 structure, whilst Ba2 Ru3 O9 (OH) has a previously unreported structure type with orthorhombic symmetry solved from synchrotron X-ray and neutron powder diffraction. SrRu2 O6 exhibits unusually high-temperature magnetic order, with antiferromagnetism persisting to at least 500â K, and refinement using room temperature neutron powder diffraction data provides the magnetic structure. All three ruthenates are metastable and readily collapse to mixtures of other oxides upon heating in air at temperatures around 300-500 °C, suggesting they would be difficult, if not impossible, to isolate under conventional high-temperature solid-state synthesis conditions.