RESUMEN
Background and Objectives: Wound healing encompasses a multitude of factors and entails the establishment of interactions among components of the basement membrane. The quantification of particle concentrations can serve as valuable biomarkers for assessing biomechanical muscle properties. The objective of this study was to examine the immunoexpression and immunoconcentration of myometrial collagen type VI, elastin, alpha-smooth muscle actin, and smooth muscle myosin heavy chain, as well as the expression of platelets and clusters of differentiation 31 in the uterine scar following a cesarean section (CS). Materials and Methods: A total of 177 biopsies were procured from a cohort of pregnant women who were healthy, specifically during the surgical procedure of CS. The participants were categorized into seven distinct groups. Group 1 consisted of primiparas, with a total of 52 individuals. The subsequent groups were organized based on the duration of time that had elapsed since their previous CS. The analysis focused on the immunoexpression and immunoconcentration of the particles listed. Results: No significant variations were observed in the myometrial immunoconcentration of collagen type VI, elastin, smooth muscle myosin, and endothelial cell cluster of differentiation 31 among the analyzed groups. The concentration of alpha-smooth muscle actin in the myometrium was found to be significantly higher in patients who underwent CS within a period of less than 2 years since their previous CS, compared to those with a longer interval between procedures. Conclusions: Our findings indicate that the immunoconcentration of uterine myometrial scar collagen type VI, elastin, smooth muscle myosin heavy chain, alpha-smooth muscle actin, and endothelial cell marker cluster of differentiation 31 remains consistent regardless of the duration elapsed since the previous CS. The findings indicate that there are no significant alterations in the biomechanical properties of the uterine muscle beyond a period of 13 months following a CS.
Asunto(s)
Cesárea , Cicatriz , Inmunohistoquímica , Humanos , Femenino , Cesárea/efectos adversos , Adulto , Inmunohistoquímica/métodos , Embarazo , Miometrio , Actinas/análisis , Elastina/análisis , Biomarcadores/análisis , Cicatrización de Heridas/fisiología , Estudios de CohortesRESUMEN
Background: Functional gastrointestinal disorders are very common condition. The aim of this study is to evaluate the implications of the mode of pregnancy termination and early infant feeding on the incidence of gastrointestinal disorders and atopic dermatitis at birth and 3, 6, and 12 months of age. Methods: This study included 82 pregnant women and their newborns born at term. All newborns were examined at birth and 3, 6, and 12 months of age according to the ROME IV criteria. Results: In children born after cesarean section, the incidence of regurgitation was significantly higher. In children fed mostly or exclusively with formula, dry skin with allergic features was observed more often compared to breastfed children, but this relation was statistically significant only at the age of 12 months. The use of antibiotic therapy increased the risk of allergic skin lesions by almost seven times at 3 months of life. Gastrointestinal disorders in the form of regurgitation, colic, and constipation occur within the period of up to 12 months of the child's life and may be related to the mode of the termination of pregnancy via cesarean section and the use of artificial feeding or antibiotic therapy. The occurrence of atopic dermatitis in infants at 12 months of life is correlated with the mode of the termination of pregnancy after cesarean section. Conclusions: One of the risk factors for the occurrence of atopic dermatitis and gastrointestinal disorders in the period up to 12 months of the child's life may be a cesarean section and the use of formula feeding or antibiotic therapy.
RESUMEN
The use of stem cells for tissue regeneration is a prominent trend in regenerative medicine and tissue engineering. In particular, dental pulp stem cells (DPSCs) have garnered considerable attention. When exposed to specific conditions, DPSCs have the ability to differentiate into osteoblasts and odontoblasts. Scaffolds are critical for cell differentiation because they replicate the 3D microenvironment of the niche and enhance cell adhesion, migration, and differentiation. The purpose of this study is to present the biological responses of human DPSCs to a purified 3D chitin scaffold derived from the marine demosponge Aplysina fistularis and modified with hydroxyapatite (HAp). Responses examined included proliferation, adhesion, and differentiation. The control culture consisted of the human osteoblast cell line, hFOB 1.19. Electron microscopy was used to examine the ultrastructure of the cells (transmission electron microscopy) and the surface of the scaffold (scanning electron microscopy). Cell adhesion to the scaffolds was determined by neutral red and crystal violet staining methods. An alkaline phosphatase (ALP) assay was used for assessing osteoblast/odontoblast differentiation. We evaluated the expression of osteogenic marker genes by performing ddPCR for ALP, RUNX2, and SPP1 mRNA expression levels. The results show that the chitin biomaterial provides a favorable environment for DPSC and hFOB 1.19 cell adhesion and supports both cell proliferation and differentiation. The chitin scaffold, especially with HAp modification, isolated from A. fistularis can make a significant contribution to tissue engineering and regenerative medicine.
RESUMEN
BACKGROUND: Low sperm motility, one of the common causes of male infertility, is associated with abnormal sperm quality. Currently, important sperm/semen biomarkers are sperm chromatin status and oxidation-reduction potential (ORP) in semen. Because the association between sperm motility and these biomarkers is still not fully clarified, our study was designed to verify the distribution and risk of sperm DNA fragmentation (SDF) and oxidative stress in semen in asthenozoospermic men. MATERIALS AND METHODS: This study was carried out on discharged sperm cells of asthenozoospermic men (isolated asthenozoospermia or coexisted with reduced sperm number and/or morphology), nonasthenozoospermic men (reduced total sperm count and/or sperm morphology) (experimental groups) and normozoospermic men (proven and presumed fertility) (control group). Basic semen analysis was evaluated according to the 6th edition of the World Health Organization manual guidelines. SDF was assessed using the sperm chromatin dispersion test, while static(s) ORP in semen was measured by means of a MiOXSYS analyser. RESULTS: The men from the asthenozoospermic group had lower basic semen parameters than those from the control and nonasthenozoospermic groups. In men with poor sperm motility SDF and sORP, prevalence and risk for > 20% SDF (high level of DNA damage) and for > 1.37 sORP (oxidative stress) were significantly higher than those of control and nonasthenozoospermic subjects. The risk for sperm DNA damage and oxidative stress in asthenozoospermic men was over 10-fold higher and almost 6-fold higher than those in control subjects and almost or over 3-fold higher than those in nonasthenozoospermic men. CONCLUSIONS AND DISCUSSION: Poor human sperm motility coexisted with low basic sperm quality. Sperm DNA damage and oxidative stress in semen were much more frequent in asthenozoospermia. These abnormalities can decrease the sperm fertilizing capability under both natural and medically assisted reproduction conditions. Thus, in asthenozoospermia, the evaluation of sperm chromatin status and oxidation-reduction potential in semen is justified and inevitable, and the appropriate antioxidant therapy can be suggested.
RESUMEN
Tissue engineering is a burgeoning field focused on repairing damaged tissues through the combination of bodily cells with highly porous scaffold biomaterials, which serve as templates for tissue regeneration, thus facilitating the growth of new tissue. Carbon materials, constituting an emerging class of superior materials, are currently experiencing remarkable scientific and technological advancements. Consequently, the development of novel 3D carbon-based composite materials has become significant for biomedicine. There is an urgent need for the development of hybrids that will combine the unique bioactivity of ceramics with the performance of carbonaceous materials. Considering these requirements, herein, we propose a straightforward method of producing a 3D carbon-based scaffold that resembles the structural features of spongin, even on the nanometric level of their hierarchical organization. The modification of spongin with calcium phosphate was achieved in a deep eutectic solvent (choline chloride : urea, 1 : 2). The holistic characterization of the scaffolds confirms their remarkable structural features (i.e., porosity, connectivity), along with the biocompatibility of α-tricalcium phosphate (α-TCP), rendering them a promising candidate for stem cell-based tissue-engineering. Culturing human bone marrow mesenchymal stem cells (hMSC) on the surface of the biomimetic scaffold further verifies its growth-facilitating properties, promoting the differentiation of these cells in the osteogenesis direction. ALP activity was significantly higher in osteogenic medium compared to proliferation, indicating the differentiation of hMSC towards osteoblasts. However, no significant difference between C and C-αTCP in the same medium type was observed.
RESUMEN
Our research was designed to verify the relationship between male infertility, basic semen characteristics (with respect to detailed sperm morphology), sperm DNA fragmentation (SDF), oxidation-reduction potential in semen (ORP), and leukocytospermia. The obtained results showed that infertile groups (with or without leukocytospermia) had significantly lower basic semen characteristics and higher SDF, raw ORP, and static ORP (sORP) than fertile controls. The thresholds of 13% SDF (AUC = 0.733) and 1.40 sORP (AUC = 0.857) were predictive values for discriminating infertile from fertile men. In infertile groups, a higher prevalence and risk for >13% SDF and >1.40 sORP were revealed. Unexpectedly, leukocytospermic subjects had lower sORP, prevalence, and risk for >1.40 sORP than leukocytospermic-negative men. These groups did not differ in SDF and raw ORP. Both SDF and sORP negatively correlated with basic semen parameters but positively correlated with sperm head and midpiece defects. sORP positively correlated with sperm tail defects, immature sperm cells with excess residual cytoplasm, and SDF. In turn, raw ORP negatively correlated with sperm count but positively correlated with SDF and sORP. These findings indicate that (1) there is a relationship between male infertility, SDF, and OS in semen; (2) in infertile men, there is a clinically significant risk of SDF and OS irrespective of leukocytospermia; and (3) the assessment of SDF and oxidative stress should be independent of leukocytospermia.
RESUMEN
The occurrence of 17α-ethinylestradiol (EE2) in the environment and its removal have drawn special attention from the scientific community in recent years, due to its hazardous effects on human and wildlife around the world. Therefore, the aim of this study was to produce an efficient enzymatic system for the removal of EE2 from aqueous solutions. For the first time, commercial silica nanopowder and 3D fibrous chitinous scaffolds from Aplysina fistularis marine sponge were used as supports for horseradish peroxidase (HRP) immobilization. The effect of several process parameters onto the removal mechanism of EE2 by enzymatic conversion and adsorption of EE2 were investigated here, including system type, pH, temperature and concentrations of H2O2 and EE2. It was possible to fully remove EE2 from aqueous solutions using system SiO2(HRP)-chitin(HRP) over a wide investigated pH range (5-9) and temperature ranges (4-45 °C). Moreover, the most suitable process conditions have been determined at pH 7, temperature 25 °C and H2O2 and EE2 concentrations equaling 2 mM and 1 mg/L, respectively. As determined, it was possible to reuse the nanoSiO2(HRP)-chitin(HRP) system to obtain even 55% EE2 degradation efficiency after five consecutive catalytic cycles.
Asunto(s)
Quitina/química , Etinilestradiol/química , Peroxidasa de Rábano Silvestre/química , Nanopartículas/química , Dióxido de Silicio/química , Contaminantes Químicos del Agua/química , Adsorción , Biocatálisis , Fenómenos Químicos , Enzimas Inmovilizadas , Humanos , Concentración de Iones de Hidrógeno , Nanopartículas/ultraestructura , Análisis Espectral , TemperaturaRESUMEN
Solutions developed by nature for structural and functional optimization of three-dimensional (3D) skeletal structures provide unique windows not only into the evolutionary pathways of organisms, but also into bioinspired materials science and biomimetics. Great examples are naturally formed 3D chitinous scaffolds of marine sponge remain a focus of modern biomedicine and tissue engineering. Due to its properties like renewability, bioactivity, and biodegradability such constructs became very interesting players as components of organic-inorganic biocomposites. Herein, we developed chitin-based biocomposites by biomimetic ex vivo deposition of calcium carbonate particles using hemolymph from the cultivated mollusk Cornu aspersum and chitinous matrix from the marine demosponge Aplysina fistularis. The biological potential of the developed biofunctionalized scaffolds for bone tissue engineering was evaluated by investigating the spreading and viability of a human fetal osteoblast cell line has been determined for the first time. Performed analyses like dynamic mechanical analysis and atomic force microscopy shown that biofunctionalized scaffold possess about 4 times higher mechanical resistance. Moreover, several topographical changes have been observed, as e.g., surface roughness (Rq) increased from 31.75 ± 2.7 nm to 120.7 ± 0.3 nm. The results are indicating its potential for use in the modification of cell delivery systems in future biomedical applications.
Asunto(s)
Materiales Biocompatibles/química , Quitina/química , Poríferos/química , Ingeniería de Tejidos , Andamios del Tejido/química , Animales , Biomimética , Regeneración Ósea , Pruebas Mecánicas , Tamaño de la PartículaRESUMEN
Background: Because the etiopathogenesis of male infertility is multifactorial our study was designed to clarify the relationship between standard semen parameters, testicular volume, levels of reproductive hormones and the fragmentation of sperm nuclear DNA (SDF). Methods: Patients (n = 130) were clustered as subjects: 1) with an abnormal volume (utrasonography) of at least one testis (<12 mL) or with a normal volume of testes and 2) with abnormal levels of at least one of the reproductive hormones (FSH, LH, PRL, TSH, total T - electrochemiluminescence method) or with normal hormonal profiles and 3) with high level of SDF (>30%), moderate (>15-30%) or low (≤15%) (sperm chromatin dispersion test). Results: In subjects with a decreased testicular volume and in subjects with abnormal levels of reproductive hormones, decreased basic semen parameters were found. Participants with abnormal testicular volume had a higher percentage of SDF and a higher level of FSH (Mann-Whitney U test). In turn, men with a high level of SDF had lower testicular volume and conventional sperm parameters than men with a low level of SDF (Kruskal-Wallis test). Conclusions: We showed that spermatogenesis disorders coexisted with decreased testicular volume and increased FSH levels. The disorders of spermatogenesis were manifested by reduced basic sperm characteristics and a high level of sperm nuclear DNA damage.
RESUMEN
Tissue engineering (TE) is a field of regenerative medicine that has been experiencing a special boom in recent years. Among various materials used as components of 3D scaffolds, naturally formed chitinous materials seem to be especially attractive because of their abundance, non-toxic and eco-friendly character. In this study, chitinous skeleton isolated from the marine sponge Aplysina fistularis (phylum: Porifera) was used for the first time as a support for the cultivation of murine fibroblasts (Balb/3T3), human dermal fibroblasts (NHDF), human keratinocyte (HaCaT), and human neuronal (SH-SY5Y) cells. Characterization techniques such as ATR FTIR, TGA, and µCT, clearly indicate that an interconnected macro-porous, thermostable, pure α-chitin scaffold was obtained after alkali-acid treatment of air-dried marine sponge. The biocompatibility of the naturally formed chitin scaffolds was confirmed by cell attachment and proliferation determined by various microscopic methods (e.g., SEM, TEM, digital microscopy) and specific staining. Our observations show that fibroblasts and keratinocytes form clusters on scaffolds that resemble a skin structure, including the occurrence of desmosomes in keratinocyte cells. The results obtained here suggest that the chitinous scaffold from the marine sponge A. fistularis is a promising biomaterial for future research about tissues regeneration.
RESUMEN
Since varicocele is so common in infertile men, this study intends to analyse the relationships between varicocele and conventional semen characteristics, sperm nuclear DNA dispersion and oxidation-reduction potential (ORP) in semen. Varicocele-positive and varicocele-negative infertile men (study groups) showed significantly lower standard sperm parameters and higher sperm DNA fragmentation (SDF) and ORP in semen than healthy volunteers and subjects with proven fertility (control groups). A lower proportion of low SDF levels (0-15% SDF) and higher incidence of high SDF levels (>30% SDF), as well as a higher prevalence of high ORP values (>1.37 mV/106 sperm/mL), were found in the study groups vs. the control groups. Moreover, infertile men had significantly lower odds ratios (ORs) for low SDF levels and significantly higher ORs for high SDF levels and high ORP. SDF and ORP were negatively correlated with sperm number, morphology, motility and vitality. Furthermore, a significant positive correlation was found between SDF and ORP. The obtained results suggest that disorders of spermatogenesis may occur in varicocele-related infertility. These abnormalities are manifested not only by reduced standard semen parameters but also by decreased sperm DNA integrity and simultaneously increased oxidative stress in semen.
Asunto(s)
Infertilidad Masculina , Varicocele , ADN/metabolismo , Humanos , Infertilidad Masculina/genética , Masculino , Oxidación-Reducción , Semen , Análisis de Semen , Recuento de Espermatozoides , Motilidad Espermática , Espermatozoides/metabolismo , Varicocele/metabolismoRESUMEN
Silicon dioxide, in the form of nanoparticles, possesses unique physicochemical properties (size, shape, and a large surface to volume ratio). Therefore, it is one of the most promising materials used in biomedicine. In this paper, we compare the biological effects of both mesoporous silica nanoparticles extracted from Urtica dioica L. and pyrogenic material. Both SEM and TEM investigations confirmed the size range of tested nanoparticles was between 6 and 20 nanometers and their amorphous structure. The cytotoxic activity of the compounds and intracellular ROS were determined in relation to cells HMEC-1 and erythrocytes. The cytotoxic effects of SiO2 NPs were determined after exposure to different concentrations and three periods of incubation. The same effects for endothelial cells were tested under the same range of concentrations but after 2 and 24 h of exposure to erythrocytes. The cell viability was measured using spectrophotometric and fluorimetric assays, and the impact of the nanoparticles on the level of intracellular ROS. The obtained results indicated that bioSiO2 NPs, present higher toxicity than pyrogenic NPs and have a higher influence on ROS production. Mesoporous silica nanoparticles show good hemocompatibility but after a 24 h incubation of erythrocytes with silica, the increase in hemolysis process, the decrease in osmotic resistance of red blood cells, and shape of erythrocytes changed were observed.
Asunto(s)
Células Endoteliales/efectos de los fármacos , Eritrocitos/efectos de los fármacos , Hemólisis/efectos de los fármacos , Nanopartículas/administración & dosificación , Estrés Oxidativo/efectos de los fármacos , Dióxido de Silicio/administración & dosificación , Supervivencia Celular , Humanos , Nanopartículas/química , Porosidad , Especies Reactivas de Oxígeno/metabolismo , Dióxido de Silicio/química , Propiedades de SuperficieRESUMEN
Studies on the identification, properties and function of chitin in sponges (Porifera), which are recognized as the first multicellular organisms on Earth, continue to be of fundamental scientific interest. The occurrence of chitin has so far been reported in 21 marine sponge species and only in two inhabiting fresh water. In this study, we present the discovery of α-chitin in the endemic demosponge Ochridaspongia rotunda, found in Lake Ohrid, which dates from the Tertiary. The presence of chitin in this species was confirmed using special staining, a chitinase test, FTIR, Raman and NEXAFS spectroscopy, and electrospray ionization mass spectrometry (ESI-MS). In contrast to the case of marine sponges, chitin in O. rotunda has been found only within its holdfast, suggesting a role of chitin in the attachment of the sponge to the hard substratum. Isolated fibrous matter strongly resemble the shape and size of the sponge holdfast with membrane-like structure.
Asunto(s)
Quitina/química , Quitina/metabolismo , Poríferos/química , Poríferos/metabolismo , AnimalesRESUMEN
Chitin, as one of nature's most abundant structural polysaccharides, possesses worldwide, high industrial potential and a functionality that is topically pertinent. Nowadays, the metallization of naturally predesigned, 3D chitinous scaffolds originating from marine sponges is drawing focused attention. These invertebrates represent a unique, renewable source of specialized chitin due to their ability to grow under marine farming conditions. In this study, the development of composite material in the form of 3D chitin-based skeletal scaffolds covered with silver nanoparticles (AgNPs) and Ag-bromide is described for the first time. Additionally, the antibacterial properties of the obtained materials and their possible applications as a water filtration system are also investigated.
Asunto(s)
Antibacterianos/farmacología , Quitina/química , Escherichia coli/efectos de los fármacos , Poríferos , Animales , Organismos Acuáticos , Nanopartículas del Metal/química , Plata/química , Relación Estructura-ActividadRESUMEN
For the first time, 3D chitin scaffolds from the marine demosponge Aplysina archeri were used for adsorption and immobilization of laccase from Trametes versicolor. The resulting chitin-enzyme biocatalytic systems were applied in the removal of tetracycline. Effective enzyme immobilization was confirmed by scanning electron microscopy. Immobilization yield and kinetic parameters were investigated in detail, in addition to the activity of the enzyme after immobilization. The designed systems were further used for the removal of tetracycline under various process conditions. Optimum process conditions, enabling total removal of tetracycline from solutions at concentrations up to 1 mg/L, were found to be pH 5, temperature between 25 and 35 °C, and 1 h process duration. Due to the protective effect of the chitinous scaffolds and stabilization of the enzyme by multipoint attachment, the storage stability and thermal stability of the immobilized biomolecules were significantly improved as compared to the free enzyme. The produced biocatalytic systems also exhibited good reusability, as after 10 repeated uses they removed over 90% of tetracycline from solution. Finally, the immobilized laccase was used in a packed bed reactor for continuous removal of tetracycline, and enabled the removal of over 80% of the antibiotic after 24 h of continuous use.
Asunto(s)
Organismos Acuáticos/química , Quitina/química , Enzimas Inmovilizadas/metabolismo , Lacasa/metabolismo , Preparaciones Farmacéuticas/aislamiento & purificación , Poríferos/química , Animales , Biocatálisis , Reactores Biológicos , Concentración de Iones de Hidrógeno , Cinética , Poríferos/ultraestructura , TemperaturaRESUMEN
Diverse fields of modern environmental technology are nowadays focused on the discovery and development of new sources for oil spill removal. An especially interesting type of sorbents is those of natural origin-biosorbents-as ready-to-use constructs with biodegradable, nontoxic, renewable and cost-efficient properties. Moreover, the growing problem of microplastic-related contamination in the oceans further encourages the use of biosorbents. Here, for the first time, naturally pre-designed molting cuticles of the Theraphosidae spider Avicularia sp. "Peru purple", as part of constituting a large-scale spider origin waste material, were used for efficient sorption of crude oil. Compared with currently used materials, the proposed biosorbent of spider cuticular origin demonstrates excellent ability to remain on the water surface for a long time. In this study the morphology and hydrophobic features of Theraphosidae cuticle are investigated for the first time. The unique surface morphology and very low surface free energy (4.47 ± 0.08 mN/m) give the cuticle-based, tube-like, porous biosorbent excellent oleophilic-hydrophobic properties. The crude oil sorption capacities of A. sp. "Peru purple" molt structures in sea water, distilled water and fresh water were measured at 12.6 g/g, 15.8 g/g and 16.6 g/g respectively. These results indicate that this biomaterial is more efficient than such currently used fibrous sorbents as human hairs or chicken feathers. Four cycles of desorption were performed and confirmed the reusability of the proposed biosorbent. We suggest that the oil adsorption mechanism is related to the brush-like and microporous structure of the tubular spider molting cuticles and may also involve interaction between the cuticular wax layers and crude oil.
Asunto(s)
Contaminación por Petróleo , Petróleo , Arañas , Contaminantes Químicos del Agua , Adsorción , Animales , Muda , Perú , PlásticosRESUMEN
Structure-based tissue engineering requires large-scale 3D cell/tissue manufacture technologies, to produce biologically active scaffolds. Special attention is currently paid to naturally pre-designed scaffolds found in skeletons of marine sponges, which represent a renewable resource of biomaterials. Here, an innovative approach to the production of mineralized scaffolds of natural origin is proposed. For the first time, a method to obtain calcium carbonate deposition ex vivo, using living mollusks hemolymph and a marine-sponge-derived template, is specifically described. For this purpose, the marine sponge Aplysin aarcheri and the terrestrial snail Cornu aspersum were selected as appropriate 3D chitinous scaffold and as hemolymph donor, respectively. The formation of calcium-based phase on the surface of chitinous matrix after its immersion into hemolymph was confirmed by Alizarin Red staining. A direct role of mollusks hemocytes is proposed in the creation of fine-tuned microenvironment necessary for calcification ex vivo. The X-ray diffraction pattern of the sample showed a high CaCO3 amorphous content. Raman spectroscopy evidenced also a crystalline component, with spectra corresponding to biogenic calcite. This study resulted in the development of a new biomimetic product based on ex vivo synthetized ACC and calcite tightly bound to the surface of 3D sponge chitin structure.
Asunto(s)
Quitina/análogos & derivados , Quitina/química , Hemolinfa/metabolismo , Poríferos/metabolismo , Caracoles/metabolismo , Andamios del Tejido , Animales , Biomineralización , Carbonato de Calcio/química , Difracción de Rayos XRESUMEN
Chitin, as a fundamental polysaccharide in invertebrate skeletons, continues to be actively investigated, especially with respect to new sources and the development of effective methods for its extraction. Recent attention has been focused on marine crustaceans and sponges; however, the potential of spiders (order Araneae) as an alternative source of tubular chitin has been overlooked. In this work, we focused our attention on chitin from up to 12 cm-large Theraphosidae spiders, popularly known as tarantulas or bird-eating spiders. These organisms "lose" large quantities of cuticles during their molting cycle. Here, we present for the first time a highly effective method for the isolation of chitin from Caribena versicolor spider molt cuticle, as well as its identification and characterization using modern analytical methods. We suggest that the tube-like molt cuticle of this spider can serve as a naturally prefabricated and renewable source of tubular chitin with high potential for application in technology and biomedicine.
Asunto(s)
Quitina/química , Quitina/aislamiento & purificación , Arañas/química , Animales , Fraccionamiento Químico , Microondas , Muda , Análisis EspectralRESUMEN
Diverse fields of modern technology and biomedicine can benefit from the application of ready-to-use chitin-based scaffolds. In this work we show for the first time the applicability of tubular and porous chitin from Caribena versicolor spiders as a scaffold for the development of an effective CuO/Cu(OH)2 catalyst for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AM), and as a scaffold for the tissue engineering of selected cells. The formation of CuO/Cu(OH)2 phases on and within the chitinous tubes leads to a hybrid material with excellent catalytic performance with respect to the reduction of p-nitrophenol. On the other hand, experimental results provide for the first time strong evidence for the biocompatibility of spider chitin with different cell types, a human progenitor cell line (hPheo1), as well as cardiomyocytes differentiated from induced pluripotent stem cells (iPSC-CMs) that were cultured on a tube-like scaffold.
Asunto(s)
Arácnidos/metabolismo , Materiales Biomiméticos/química , Quitina/química , Ingeniería de Tejidos , Andamios del Tejido/química , Animales , Células Cultivadas , HumanosRESUMEN
Sponges are a valuable source of natural compounds and biomaterials for many biotechnological applications. Marine sponges belonging to the order Verongiida are known to contain both chitin and biologically active bromotyrosines. Aplysina archeri (Aplysineidae: Verongiida) is well known to contain bromotyrosines with relevant bioactivity against human and animal diseases. The aim of this study was to develop an express method for the production of naturally prefabricated 3D chitin and bromotyrosine-containing extracts simultaneously. This new method is based on microwave irradiation (MWI) together with stepwise treatment using 1% sodium hydroxide, 20% acetic acid, and 30% hydrogen peroxide. This approach, which takes up to 1 h, made it possible to isolate chitin from the tube-like skeleton of A. archeri and to demonstrate the presence of this biopolymer in this sponge for the first time. Additionally, this procedure does not deacetylate chitin to chitosan and enables the recovery of ready-to-use 3D chitin scaffolds without destruction of the unique tube-like fibrous interconnected structure of the isolated biomaterial. Furthermore, these mechanically stressed fibers still have the capacity for saturation with water, methylene blue dye, crude oil, and blood, which is necessary for the application of such renewable 3D chitinous centimeter-sized scaffolds in diverse technological and biomedical fields.