Consumers are attracted to traditional fermented foods due to their unique flavor and nutritional value. However, the traditional fermentation technique can no longer accommodate the requirements of the food industry. Traditional fermented foods produce hazardous compounds, off-odor, and anti-nutritional factors, reducing product stability. The microbial system complexity of traditional fermented foods resulting from the open fermentation process has made it challenging to regulate these problems by modifying microbial behaviors. Synthetic microbial communities (SynComs) have been shown to simplify complex microbial communities and allow for the targeted design of microbial communities, which has been applied in processing traditional fermented foods. Herein, we describe the theoretical information of SynComs, particularly microbial physiological processes and their interactions. This paper discusses current approaches to creating SynComs, including designing, building, testing, and learning, with typical applications and fundamental techniques. Based on various traditional fermented food innovation demands, the potential and application of SynComs in enhancing the quality of traditional fermented foods are highlighted. SynComs showed superior performance in regulating the quality of traditional fermented foods using the interaction of core microorganisms to reduce the hazardous compounds of traditional fermented foods and improve flavor. Additionally, we presented the current status and future perspectives of SynComs for improving the quality of traditional fermented foods.
Fermentation , Fermented Foods , Food Microbiology , Fermented Foods/microbiology , Microbiota , Food Quality , Bacteria
Myosin from bighead carp (Aristichthys nobilis) as a main type of fish protein possesses a good emulsifying ability. However, whether bighead carp myosin (BCM) could construct stable Pickering emulsions is still unclear. Therefore, myosin particles and Pickering emulsions stabilized by bighead carp myosin (BCMPEs) were analyzed. The surface structure of BCM particles at 0.6 mol/L NaCl treatment was uniform and compact with a contact angle of 86.4 ± 2.7°, exhibiting the potential ability to construct O/W Pickering emulsions. The size and flocculation index (FI) of BCMPEs decreased with the increase in BCM concentrations of 1%-4% (w/v). Reversely, the size of BCMPEs increased with the increase in oil-water ratios. BCM particles could uniformly distribute at the oil-water interface to stabilize BCMPEs at a BCM concentration of 4% (w/v) and an oil-water ratio of 6:4 (v/v). This study could help explore fish proteins to construct Pickering emulsions for the deep processing of fish products.
Hydrothermal carbonization (HTC) is an effective strategy for high-value utilization of tea residue (TR), and it was noticed the aqueous phase (AP) has not been extensively studied. This study aimed to investigate the chemical components and characteristics of the AP, and applied it in active food packaging films. The results showed that the total phenolic content of AP was 1.86 mg GAE/mL, and the main compounds in AP were organic acids, alcohols, and amino acids. The AP showed excellent antibacterial activity and antioxidant capacity. The active films were prepared using the casting method. The 4:7-AP/PVA film showed outstanding mechanical properties (tensile strength = 34.18 MPa, elongation at break = 458.67%), antioxidant ability (DPPH scavenging capacity 92.01%), antibacterial activity, water resistance and biocompatibility. The banana preservation test showed the AP/PVA films could successfully prolong the shelf-life of bananas and have the potential to be food packaging films.
Oil-in-water (O/W) high internal phase (HIP) emulsion was prepared to investigate its effects on the physicochemical properties and antimicrobial properties of soy protein isolate (SPI)-based films. The particle size and migration degree of oil droplets in the SPI film-forming solution with HIP emulsion and the films were lower than those with conventional O/W emulsion or oil. The SPI-based emulsion films with HIP emulsion containing 30 % oil had the lowest water vapor permeability (1.15 × 10-10 g·m-1·s-1·Pa-1), glass transition temperature (40.93 °C) and tensile strength (4.47 MPa), and the highest transparency value (12.87) and elongation at break (160.83 %). The antimicrobial test of the SPI-based emulsion films loaded with thymol showed that the thymol encapsulation efficiency, sustained release effect, and growth inhibition effect on microbes were higher for the films with HIP emulsion than those for the films with O/W emulsion or oil.
Accidental bleeding is an unavoidable problem in daily life. To avoid the risk of excessive blood loss, it is urgent to design a functional material that can quickly stop bleeding. In this study, an efficient wound dressing for hemostasis was investigated. Based on the characteristics that Ca2+ and fish skin collagen (FSC) could activate the coagulation mechanism, hemostatic cotton was prepared by solvent replacement method using CaCl2, FSC, soluble starch (SS), and polyvinyl alcohol (PVA) as raw materials. The cytotoxicity test showed the Ca2+PVA/FSC-SS hemostatic cottons had good biocompatibility. The activated partial thromboplastin time (APTT) of Ca2+PVA/FSC-SS(4) was 35.34 s, which was 22.07 s faster than that of PVA/FSC-SS, indicating Ca2+PVA/FSC-SS mediated the endogenous coagulation system. In vitro coagulation test, Ca2+PVA/FSC-SS(4) could stop bleeding rapidly within 39.60 ± 5.16 s, and the ability of wound healing was higher than commercial product (Celox). This study developed a rapid procoagulant and hemostatic material, which had a promising application in a variety of environments.
Hemostatics , Animals , Hemostatics/pharmacology , Starch/pharmacology , Hemostasis , Blood Coagulation , Collagen , Polyvinyl Alcohol , Hemorrhage , Ethanol , Anti-Bacterial Agents
BACKGROUND: Hairtail (Trichiurus haumela) surimi exhibits poor gelation properties and a dark gray appearance, which hinder its utilization in high-quality surimi gel products. The effect of Pickering emulsions stabilized by myofibrillar proteins (MPE) on the gel properties of hairtail surimi has been unclear. In particular, the impact of MPE under NaCl and KCl treatments on the quality of hairtail surimi gels requires further elucidation. RESULTS: Pickering emulsions stabilized by myofibrillar proteins and treated with NaCl or KCl (Na-MPE, K-MPE) were added to hairtail surimi in amounts of 10-70 g kg-1. The addition of 50 g kg-1 Na-MPE and K-MPE improved the gel strength, textural properties, whiteness, and water-holding capacity (WHC) of hairtail surimi. The relative content of ß-turn and ß-sheet in the surimi gels increased and the relative content of random coils and α-helix decreased with the addition of oil. The addition of Na-MPE and K-MPE did not affect the secondary structure of surimi gels but stimulated the gelation of hairtail surimi gels. Hairtail surimi containing K-MPE demonstrated similar performance in terms of hardness, microstructure, and WHC compared with the addition of Na-MPE. CONCLUSION: The quality of hairtail surimi gels can be improved by the addition of Na-MPE or K-MPE. The K-MPE proved to be an effective option for enhancing the properties of hairtail surimi gels at 50 g kg-1 to replace Na-MPE. © 2024 Society of Chemical Industry.
Fish Proteins , Food Handling , Fish Proteins/chemistry , Emulsions , Sodium Chloride , Fish Products/analysis , Gels/chemistry
The off-odors of sea cucumber intestinal peptide (SCIP) severely limit its application. In this study, the V-type starches were derived from high amylose maize starch to adsorb odors of SCIP and the adsorption mechanism was explored. The inclusion complexes formed by V-type starches and volatile compounds of SCIP were characterized by X-ray diffraction and Fourier transform infrared spectroscopy. The electronic nose results revealed a decreasing trend in response values of SCIP, with significant differences before and after deodorization (p < 0.05). Furthermore, 82 volatiles were identified from SCIP, and six were determined as key volatiles using gas chromatography-mass spectrometry. The V6- and V7-type starches with smaller cavity sizes selectively adsorb butyric acid, isobutyric acid and nonaldehyde, and V8-type starches with a larger cavity size selectively adsorb trimethylamine. This study proved that using V-type starches for deodorization could effectively improve SCIP flavor.
Sea Cucumbers , Animals , Adsorption , Odorants , Zea mays/chemistry , Starch/chemistry , Amylose/chemistry , X-Ray Diffraction , Peptides
The comparative effects of water-in-oil (W/O) and oil-in-water (O/W) emulsions on the physicochemical characteristics of silver carp surimi gels were investigated. The breaking force of surimi gels was 188.72 g, which decreased with increasing W/O emulsion but remained constant by adding O/W emulsion. The hardness decreased with increasing W/O emulsion, while the other parameters to TPA maintained constant whether the W/O or O/W emulsion was added. The yellowness value of surimi gels was 1.30, which increased with increasing W/O emulsion while remained constant after adding O/W emulsion. The water-holding capacity of surimi gels was invariant when emulsions increased. After emulsions added to surimi gels, no changes in the surimi protein interactions were found in electrophoretic patterns and Fourier transform infrared spectra. The increasing W/O emulsion enlarged the droplet size of oil and then destroyed the surimi gel network structure, while the oil droplets were evenly dispersed with increasing O/W emulsion.
The structural properties and emulsification of myofibrillar proteins (MPs) are susceptibly affected by salt ions. The effect of different salt ions on the structural properties and emulsification of MPs from hairtail (Trichiurus haumela) remains unclear. Hairtail MPs were analyzed under different ion treatments of Na+, K+, Ca2+ and Mg2+. MPs at K+ and Na+ treatment showed a similar trend on salt effect due to the unfolding of proteins under salt ions. However, the excessive electrostatic effect of divalent ions could enhance protein aggregation, especially at Ca2+ and Mg2+. The ß-sheet of MPs at different salt ions interconverted with α-helix and random coil at ionic strengths from 0.1 mol/L to 1.0 mol/L. The surface hydrophobicity and active sulfhydryl content of MPs increased with the improvement of ionic strengths at 0-0.8 mol/L. Under Ca2+ and Mg2+ treatments, the turbidity of MPs was low compared to that under the treatment of Na+ and K+. Additionally, the emulsification of hairtail MPs treated with different ions was improved at an ionic strength of 0.6 mol/L. This study can contribute to using salts in constructing fish protein-based emulsions for manufacturing emulsified surimi products and promoting the development and utilization of hairtail proteins.
Perciformes , Animals , Fish Proteins/chemistry
The antioxidant activity in vitro and in vivo of Actinopyga miliaris hydrolysate (AMH) was investigated. The proportion of oligopeptides with 150-1000 Da in AMH was 65.48%. The IC50 values of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), hydroxyl radical scavenging ability, and ferric ion reducing power of AMH were 0.37, 3.43, and 24.15 mg/mL, respectively. Compared with the control group, the body length of Caenorhabditis elegans fed with 8 mg/mL AMH extended from 632.08 µm to 1009.57 µm, and the swallowing frequency and head-swing frequency increased significantly. After being fed with AMH, the lifespan of C. elegans can be prolonged even under stress conditions, primarily due to superoxide dismutase activity, catalase activity, reduced glutathione content, and total antioxidant capacity in C. elegans increased, whereas reactive oxygen species level was reduced. The results showed that AMH had in vitro and in vivo antioxidant activity, which can alleviate oxidative damage and prolong life of C. elegans.
The cellulose nanofibers (CNFs) based pH-sensitive indicator films were developed by mixing guar gum (GG) with bromothymol blue-anchored chitin (BTB-Chitin) as an indicator to monitor shrimp freshness. The BTB-Chitin was prepared by grafting hydroxypropyltriethylamine groups (HPTA) to chitin first, then anchoring bromothymol blue (BTB) to prepare intelligent pH response BTB-Chitin. The 0.08 BTB-Chitin films had a good tensile strength of 11.76 MPa and the water contact angle values were 125°, which displayed obvious color response to pH buffers and acid base volatile gas. Besides, the homogeneous and flexible composite films showed good color stability and reversibility. The released amount of BTB was very low from the BTB-Chitin films in heptane and corn oil. The composite films had been degraded completely in 15 days in soil. The pH and volatile base nitrogen were measured to determine the degree decay of shrimp (Litopenaeus vannamei), and the prepared pH-sensitive films changed from yellow (fresh) to cyan (spoiled) with the freshness of shrimp decreased, indicating the BTB-Chitin films could detect the shrimp freshness in real-time and high visibility.
Bromthymol Blue , Chitin , Seafood , Hydrogen-Ion Concentration , Food Packaging , Anthocyanins
The effect of cysteine concentration on the viscosity of soy protein isolate (SPI)-based film-forming solution (FFS) and physicochemical properties of SPI films was investigated. The apparent viscosity of FFS decreased after adding 1 mmol/L cysteine but did not change after adding 2-8 mmol/L cysteine. After treatment with 1 mmol/L cysteine, the film solubility decreased from 70.40% to 57.60%, but the other physical properties did not change. The water vapor permeability and contact angle of SPI films increased as cysteine concentration increased from 4 mmol/L to 8 mmol/L, whereas the film elongation at break decreased. Based on scanning electron microscopy and X-ray diffraction results, cysteine crystallization could be aggregated on the surface of SPI films treated with 4 or 8 mmol/L cysteine. In conclusion, pretreatment with approximately 2 mmol/L cysteine could reduce the viscosity of SPI-based FFS, but did not change the physicochemical properties of SPI films.
Although Vibrio parahaemolyticus infections cause severe diseases of large yellow croaker (Larimichthys crocea), using antibiotics and other chemical agents to treat these infections could result in antimicrobial resistance, environmental pollution, and other associated problems. This study identified seven peptides from Lacticaseibacillus paracasei fermentation broth using ultra-high-performance liquid chromatography-mass spectrometry and screened antimicrobial peptide Y2Fr (VEIKNGLLKLNGKPLLIR) through its net charge, hydrophobicity and predicted secondary structure. Antibacterial activity analysis revealed that Y2Fr had a minimum inhibitory concentration (MIC) of 125 µg/mL, minimum bactericidal concentration (MBC) of 250 µg/mL against V. parahaemolyticus and a time-kill of 3 h. In a bacterial membrane environment, the secondary structure of peptide Y2Fr changed from a random coil to a ß-sheet to enhance its membrane permeability and binding to bacteria DNA to exert its antibacterial effect. Further molecular docking analysis revealed that peptide Y2Fr could bind to the membrane protein KKI11460.1 and DNA polymerase A0A0L8TVA4 of V. parahaemolyticus through hydrogen bonds. Meanwhile, treatment of Y2Fr with mammalian red blood cells and plasma revealed that it was noncytotoxic, nonhemolytic, and stable under physiological conditions. Thus, peptide Y2Fr has great potential use in treating and preventing infections caused by V. parahaemolyticus or similar bacteria in aquatic animals.
Perciformes , Vibrio parahaemolyticus , Animals , Vibrio parahaemolyticus/genetics , Lacticaseibacillus , Fermentation , Molecular Docking Simulation , Anti-Bacterial Agents/chemistry , Peptides/pharmacology , Peptides/metabolism , Perciformes/metabolism , Bacteria/metabolism , Mammals/metabolism
The strategies to broaden the applications of proteins involve their modification with polysaccharides. However, the characteristics and application of myofibrillar proteins (MPs) from golden threadfin bream (Nemipterus virgatus) complexed with chitosan (CS) are still unclear. Therefore, the characteristics of MPs complexed with CS and their application were investigated at different MP/CS ratios (100:0-80:20 (w/w)). The turbidity of MP/CS complexes was small at the MP/CS ratio of 95:5 (w/w). Besides, CS addition induced changes in MP structure to make it hydrophilic. Secondary structure analysis showed that α-helix and ß-turn interconverted with ß-sheet and random coil after the addition of CS. Additionally, the thermal stability of MP/CS mixtures enhanced after the addition of CS and the MP/CS mixtures at the ratio of 95:5 (w/w) had a relatively compact structure. High internal phase emulsions (HIPEs) prepared at the MP/CS ratio of 95:5 (w/w) were relatively stable compared to those at the other ratios. Consequently, MP/CS mixtures at suitable ratios possess the potential ability to prepare HIPEs. These results exhibit that MP/CS mixtures may be applied for constructing food-graded emulsion delivery systems with a high internal phase in the food industry.
Chitosan , Animals , Fishes , Emulsions/chemistry , Seafood
The preparation of emulsion films using pre-emulsification has received extensive attention due to the enhancement of oil binding capacity. However, the different effects of water in oil (W/O) and oil in water (O/W) pre-emulsions on the physicochemical properties of films are still unclear. Therefore, the soy protein isolate (SPI) based emulsion films were prepared by W/O or O/W pre-emulsion using sucrose esters with different hydrophile-lipophile balances to investigate the properties of SPI emulsion (SPIE) films. The viscosity, storage moduli, and loss moduli of film-forming solutions (FFSs) with O/W pre-emulsion were higher than those of FFSs with W/O pre-emulsion. The oil droplets of FFSs with W/O pre-emulsion were large and uneven, and the oil droplet size increased after drying. Phase separation and macroporous network appeared in cross-sectional of SPIE films with W/O pre-emulsion according to scanning electron microscope images. Meanwhile, the SPIE films with W/O pre-emulsion demonstrated higher oil concentration and hydrophobicity on the upper surface compared with the SPIE films with O/W pre-emulsion. Low tensile strength, glass transition temperature, and high elongation at break and transparency value of SPIE films with O/W pre-emulsions were founded. The water vapor permeability of SPIE films with W/O pre-emulsion increased with the addition of oil, whereas the opposite trend appeared in that with O/W pre-emulsion. In conclusion, the structure and porosity of emulsion films could be affected by the pre-emulsion types, which can determine the application ranges.
Esters , Soybean Proteins , Emulsions , Cross-Sectional Studies , Ketones , Sucrose
This study focused on the characteristics and in vitro digestion of resveratrol encapsulated in Pickering emulsions stabilized by tea water-insoluble protein nanoparticles (TWINs). The absolute value of zeta potential of Pickering emulsions stabilized by TWIPNs (TWIPNPEs) encapsulating resveratrol was above 40 mV. Resveratrol encapsulated in TWIPNPEs was located at a hydrophobic environment of emulsion droplets. Additionally, the encapsulation efficiency (EE) of TWIPNPEs at TWIPN concentrations of 3.0% and 4.0% was above 85%. The resveratrol encapsulated in TWIPNPEs at a TWIPN concentration of 4.0% was still greater than 80% after UV irradiation to reduce the susceptibility of resveratrol for photodegradation. Moreover, the bioavailability of resveratrol in TWIPNPEs was improved in the simulated in vitro digestion. The bioavailability of resveratrol in TWIPNPEs in the simulated system was two times higher than unencapsulated resveratrol. This research could be useful for the encapsulation and application of nutraceuticals like resveratrol based on TWIPNPEs.
To explore the interaction between lipids and proteins during emulsion film formation, the linoleic acid concentration effects on the physicochemical properties of soybean ß-conglycinin (7S) films were studied. The viscosity and size of oil droplets in the film-forming solution gradually increased with the increasing linoleic acid concentration. As the linoleic acid concentration increased, the number of oil droplets on the film surfaces and elongation at break of films gradually increased, whereas the tensile strength decreased. The films containing 20% linoleic acid had the highest water vapor permeability value, which was decreased by increasing or decreasing the linoleic acid concentration. According to the molecular dynamics simulation and chemical interactions, 7S could be adsorbed at the linoleic acid interface and bind stably, resulting in the decreased ionic and hydrogen bonds but the increased hydrophobic interactions and covalent bonds among proteins in the films.
The effect of baking temperature on the physicochemical, sensory and digestive properties of eel burgers was investigated. The moisture content of eel burgers gradually decreased with increased baking temperature, whereas the water-holding capacity remained unchanged. The breaking force of eel burgers baked at 160°C was significantly higher than that at other baking temperatures. With increased baking temperature from 100 to 220°C, amide I in the Fourier transform infrared spectroscopy of eel burgers shifted from 1,645 to 1,633 cm-1, and the peak intensity of 1,744 cm-1 initially increased and then decreased. When the baking temperature exceeded 160°C, the band intensity of protein aggregate increased gradually with increased baking temperature. Scanning electron microscopy result indicated that the muscle fibers in eel burgers contracted significantly with increased baking temperature, and a honeycomb-like network structure appeared in eel burgers baked at 220°C. The sulfur compounds in the eel burgers baked at 130°C were lower than those of the sample baked at 100°C, but it increased gradually with further increased baking temperature. The aftertaste astringency, richness, saltiness, and overall acceptability of eel burgers increased with increased baking temperature. The eel burgers baked at 130-160°C could be easily digested according to the in vitro digestibility and confocal laser confocal microscopy of gastrointestinal digests. In conclusion, the texture properties, barbecue aroma, and digestibility of eel burgers could be controlled by the baking temperature.
Myofibrillar proteins (MPs) are susceptibly affected by ionic strength. The effect of ionic strength on the structure and emulsifying properties of MPs from hairtail (Trichiurus haumela) is still unclear. Therefore, the effect of ionic strength on the structural properties and emulsification of myofibrillar proteins from hairtail was analyzed. The increase in ionic strength led to the increase in endogenous fluorescence intensity of MPs. The α-helix content in MPs first increased and then decreased from ionic strength of 0 to 1.0 mol/L and ß-sheet content exhibited the oppositive trend, indicating that α-helix in MP transformed into ß-sheet. The surface hydrophobic groups of MPs increased; however, the contact angle decreased with the increase in ionic strength of 0-0.8 mol/L and a slight rebound at 1.0 mol/L. Sulfhydryl content and electrophoretic analysis further exhibited the change of MP structure at ionic strengths of 0-1.0 mol/L. Besides, the droplet size of MP emulsions was small and evenly distributed at 0.6 mol/L. Additionally, the creaming index of MP emulsions had better stability prepared at 0.6 mol/L than the other ionic strength conditions. The apparent viscosity of MP emulsions increased with the increase in ionic strength of 0-0.8 mol/L and decreased slightly at 1.0 mol/L. The rheological behavior of MP emulsions exhibited gel-like behavior without the effect of temperatures at 20-80 °C. These results can broaden the potential application of MPs from hairtail on the emulsion-type seafood products and delivery system in the food industry.
Perciformes , Animals , Emulsions/chemistry , Gels/chemistry , Osmolar Concentration , Rheology
Tea water-insoluble protein nanoparticles (TWIPNs) can be applied to stabilize Pickering emulsions. However, the effect of ionic strength (0-400 mmol/L) on the characteristics of Pickering emulsions stabilized by TWIPNs (TWIPNPEs) including volume-averaged particle size (d4,3), zeta potential, microstructure and rheological properties is still unclear. Therefore, this work researched the effect of ionic strength on the characteristics of TWIPNPEs. The d4,3 of TWIPNPEs in the aquatic phase increased with the increase in ionic strength (0-400 mmol/L), which was higher than that in the SDS phase. Furthermore, the flocculation index of TWIPNPEs significantly (P < 0.05) increased from 24.48 to 152.92% with the increase in ionic strength. This could be verified from the microstructure observation. These results indicated that ionic strength could promote the flocculation of TWIPNPEs. Besides, the absolute values of zeta potential under different ionic strengths were above 40 mV in favor of the stabilization of TWIPNPEs. The viscosity of TWIPNPEs as a pseudoplastic fluid became thin when shear rate increased from 0.1 to 100 s-1. The viscoelasticity of TWIPNPEs increased with increasing ionic strength to make TWIPNPEs form a gel-like Pickering emulsion. the possible mechanism of flocculation stability of TWIPNPEs under different ionic strengths was propose. TWIPNs adsorbed to the oil-water interface would prompt flocculation between different emulsion droplets under the high ionic strength to form gel-like behavior verified by CLSM. These results on the characteristics of TWIPNPEs in a wide ionic strength range would provide the theoretical basis for applying Pickering emulsions stabilized by plant proteins in the food industry.
