RESUMEN
The meniscus regeneration can present major challenges such as mimicking tissue microstructuration or triggering cell regeneration. In the case of lesions that require a personalized approach, photoprinting offers the possibility of designing resolutive biomaterial structures. The photo-cross-linkable ink composition determines the process ease and the final network properties. In this study, we designed a range of hybrid inks composed of gelatin(G) and 6-PLA arms(P) that were photo-cross-linked using tyramine groups. The photo-cross-linking efficiency, mechanical properties, degradation, and biological interactions of inks with different G/P mass ratios were studied. The G50P50 network properties were suitable for meniscus regeneration, with Young's modulus of 6.5 MPa, degradation in 2 months, and good cell proliferation. We then confirmed the potential of these inks to produce high-resolution microstructures by printing well-defined microstructures using two-photon polymerization. These hybrid inks offer new perspectives for biocompatible, degradable, and microstructured tissue engineering scaffold creation.
Asunto(s)
Gelatina , Tinta , Menisco , Poliésteres , Polimerizacion , Impresión Tridimensional , Regeneración , Ingeniería de Tejidos , Andamios del Tejido , Tiramina , Gelatina/química , Tiramina/química , Ingeniería de Tejidos/métodos , Menisco/química , Andamios del Tejido/química , Regeneración/efectos de los fármacos , Poliésteres/química , Animales , Materiales Biocompatibles/química , Proliferación Celular/efectos de los fármacos , HumanosRESUMEN
Meniscus-related injuries are a common orthopedic challenge with an increasing incidence in the population. While the preservation of viable meniscal tissue is the preferred approach in repair strategies, complex or total traumatic lesions may require alternative therapeutic approaches such as meniscal reconstruction using allografts or engineered equivalents. Although clinical studies suggest promising outcomes with the use of acellular implants, further development is needed to improve their biological and mechanical requirements. Decellularized extracellular matrix (dECM) derived from menisci is a promising biomaterial for meniscus tissue engineering due to its recapitulation of the native tissue environment and the maintenance of tissue-specific cues. However, the associated mechanical limitations of dECM-derived scaffolds frequently impedes their adoption, requiring additional reinforcement or combining with stiffer biomaterials to increase their load-bearing properties. In this study, decellularized extracellular matrix was extracted and its fibrillation was controlled by adjusting both pH and salt concentrations to fabricate mechanically functional meniscal tissue equivalents. The effect of collagen fibrillation on the mechanical properties of the dECM constructs was assessed, and porcine-derived fibrochondrocytes were used to evaluate in vitro biocompatibility. It was also possible to fabricate meniscus-shaped implants by casting of the dECM and to render the implants suitable for off-the-shelf use by adopting a freeze-drying preservation method. Suture pull-out tests were also performed to assess the feasibility of using existing surgical methods to fix such implants within a damaged meniscus. This study highlights the potential of utilizing ECM-derived materials for meniscal tissue substitutes that closely mimic the mechanical and biological properties of native tissue.
Asunto(s)
Menisco , Andamios del Tejido , Animales , Porcinos , Andamios del Tejido/química , Matriz Extracelular Descelularizada , Matriz Extracelular/química , Ingeniería de Tejidos/métodos , Menisco/química , Materiales Biocompatibles , Concentración de Iones de HidrógenoRESUMEN
This study evaluates the morpho-functional modifications that characterize meniscal development from neonatal to adult dogs. Even if menisci are recognized as essential structures for the knee joint, poor information is available about their morphogenesis, in particular in dog models. Menisci from a group of Dobermann Pinchers aged 0, 10, 30 days, and 4 years (T0, T10, T30, adult, respectively) were analyzed by SEM, histochemistry (Safranin O and Picro Sirius Red Staining analyzed under a polarized light microscope), immunofluorescences (collagen type I and II), biomechanical (compression) and biochemical analyses (glycosaminoglycans, GAGs, and DNA content). SEM analyses revealed that the T0 meniscus is a bulgy structure that during growth tends to flatten, firstly in the inner zone (T10) and then even in the outer zone (T30), until the achievement of the completely smooth adult final shape. These results were further supported by the histochemistry analyses in which the deposition of GAGs started from T30, and the presence of type I birefringent collagen fibers was observed from T0 to T30, while poorly refringent type III collagen fibers were observed in the adult dogs. Double immunofluorescence analyses also evidenced that the neonatal meniscus contains mainly type I collagen fibers, as well as the T10 meniscus, and demonstrated a more evident regionalization and crimping in the T30 and adult meniscus. Young's elastic modulus of the meniscus in T0 and T10 animals was lower than the T30 animals, and this last group was also lower than adult ones (T0-T10 vs T30 vs adult). Biochemical analysis confirmed that cellularity decreases over time from neonatal to adult (p < 0.01). The same decreasing trend was observed in GAGs deposition. These results may suggest that the postnatal development of canine meniscus may be related to the progressive functional locomotory development: after birth, the meniscus acquires its functionality over time, through movement, load, and growth itself.
Asunto(s)
Meniscos Tibiales , Menisco , Perros , Animales , Meniscos Tibiales/química , Articulación de la Rodilla , Menisco/química , Colágeno Tipo I , GlicosaminoglicanosRESUMEN
Reduced knee weight-bearing from prescription or sedentary lifestyles are associated with cartilage degradation; effects on the meniscus are unclear. Rodents exposed to spaceflight or hind limb unloading (HLU) represent unique opportunities to evaluate this question. This study evaluated arthritic changes in the medial knee compartment that bears the highest loads across the knee after actual and simulated spaceflight, and recovery with subsequent full weight-bearing. Cartilage and meniscal degradation in mice were measured via microCT, histology, and proteomics and/or biochemically after: (1) ~ 35 days on the International Space Station (ISS); (2) 13-days aboard the Space Shuttle Atlantis; or (3) 30 days of HLU, followed by a 49-day weight-bearing readaptation with/without exercise. Cartilage degradation post-ISS and HLU occurred at similar spatial locations, the tibial-femoral cartilage-cartilage contact point, with meniscal volume decline. Cartilage and meniscal glycosaminoglycan content were decreased in unloaded mice, with elevated catabolic enzymes (e.g., matrix metalloproteinases), and elevated oxidative stress and catabolic molecular pathway responses in menisci. After the 13-day Shuttle flight, meniscal degradation was observed. During readaptation, recovery of cartilage volume and thickness occurred with exercise. Reduced weight-bearing from either spaceflight or HLU induced an arthritic phenotype in cartilage and menisci, and exercise promoted recovery.
Asunto(s)
Cartílago Articular/fisiopatología , Miembro Posterior/fisiopatología , Articulación de la Rodilla/fisiopatología , Osteoartritis de la Rodilla/fisiopatología , Fenotipo , Vuelo Espacial , Animales , Femenino , Glicosaminoglicanos/análisis , Masculino , Menisco/química , Menisco/fisiopatología , Ratones , Modelos Animales , Soporte de PesoRESUMEN
Degenerative changes in meniscus are diagnosed during surgery by means of mechanical testing and visual evaluation. This method is qualitative and highly subjective, providing very little information on the internal state of the meniscus. Thus, there is need for novel quantitative methods that can support decision-making during arthroscopic surgery. In this study, we investigate the potential of near-infrared spectroscopy (NIRS) for mapping the biochemical constituents of human meniscus, including water, uronic acid, and hydroxyproline contents. Partial least squares regression models were developed using data from 115 measurement locations of menisci samples extracted from 7 cadavers and 11 surgery patient donors. Model performance was evaluated using an independent test set consisting of 55 measurement locations within a meniscus sample obtained from a separate cadaver. The correlation coefficient of calibration (ρtraining), test set (ρtest), and root-mean-squared error of test set (RMSEP) were as follows: water (ρtraining = 0.61, ρtest = 0.39, and RMSEP = 2.27 percentage points), uronic acid (ρtraining = 0.68, ρtest = 0.69, and RMSEP = 6.09 basis points), and hydroxyproline (ρtraining = 0.84, ρtest = 0.58, and error = 0.54 percentage points). In conclusion, the results suggest that NIRS could enable rapid arthroscopic mapping of changes in meniscus biochemical constituents, thus providing means for quantitative assessment of meniscus degeneration.
Asunto(s)
Menisco/química , Colágeno/análisis , Glicosaminoglicanos/análisis , Humanos , Análisis de los Mínimos Cuadrados , Modelos Biológicos , Espectroscopía Infrarroja Corta , Agua/análisisRESUMEN
The meniscus has complex biomechanical functions endowed by the hierarchical fibrous structure of its extracellular matrix (ECM), which plays a central role in protecting the knee joint. However, it is challenging to recapitulate the ECM structure of the meniscus. Herein, we used electrospinning to prepare various scaffolds with distinct nanofibrous structures to approximate that of the heterogeneous ultrastructure of meniscus ECM. Our results showed that adjusting the deposition manner of nanofibers during electrospinning could effectively manipulate the architectures of resulting scaffolds. This approach led to electrospun scaffolds with random or aligned fibrous structures that reassemble the surface or superficial layers of the meniscus. We also showed that assembly of electrospun nanofibers into yarn-like configurations replicates the circumferentially aligned fibrous bundles of the inner part of the meniscus. These scaffolds exhibited distinct fibrous anisotropies and mechanical properties. In vitro studies indicated good cytocompatibility of scaffolds, especially, the yarn scaffold supported considerable meniscus cell infiltration. The meniscus cells, in turn, enhanced the mechanical properties of scaffolds. Taken together, these data imply that electrospun scaffolds may have potential in enhancing meniscus repair and regeneration.
Asunto(s)
Matriz Extracelular/química , Ensayo de Materiales , Menisco , Nanofibras/química , Andamios del Tejido/química , Animales , Células Cultivadas , Menisco/química , Menisco/citología , Menisco/metabolismo , Conejos , PorcinosRESUMEN
Despite the fact that type III collagen is the second most abundant collagen type in the body, its contribution to the physiologic maintenance and repair of skeletal tissues remains poorly understood. This study queried the role of type III collagen in the structure and biomechanical functions of two structurally distinctive tissues in the knee joint, type II collagen-rich articular cartilage and type I collagen-dominated meniscus. Integrating outcomes from atomic force microscopy-based nanomechanical tests, collagen fibril nanostructural analysis, collagen cross-link analysis and histology, we elucidated the impact of type III collagen haplodeficiency on the morphology, nanostructure and biomechanical properties of articular cartilage and meniscus in Col3a1+/- mice. Reduction of type III collagen leads to increased heterogeneity and mean thickness of collagen fibril diameter, as well as reduced modulus in both tissues, and these effects became more pronounced with skeletal maturation. These data suggest a crucial role of type III collagen in mediating fibril assembly and biomechanical functions of both articular cartilage and meniscus during post-natal growth. In articular cartilage, type III collagen has a marked contribution to the micromechanics of the pericellular matrix, indicating a potential role in mediating the early stage of type II collagen fibrillogenesis and chondrocyte mechanotransduction. In both tissues, reduction of type III collagen leads to decrease in tissue modulus despite the increase in collagen cross-linking. This suggests that the disruption of matrix structure due to type III collagen deficiency outweighs the stiffening of collagen fibrils by increased cross-linking, leading to a net negative impact on tissue modulus. Collectively, this study is the first to highlight the crucial structural role of type III collagen in both articular cartilage and meniscus extracellular matrices. We expect these results to expand our understanding of type III collagen across various tissue types, and to uncover critical molecular components of the microniche for regenerative strategies targeting articular cartilage and meniscus repair.
Asunto(s)
Cartílago Articular/fisiología , Colágeno Tipo III/genética , Colágeno Tipo II/química , Colágeno Tipo I/química , Menisco/fisiología , Animales , Fenómenos Biomecánicos , Cartílago Articular/química , Colágeno Tipo III/metabolismo , Matriz Extracelular/metabolismo , Haploinsuficiencia , Humanos , Masculino , Mecanotransducción Celular , Menisco/química , Ratones , Microscopía de Fuerza AtómicaRESUMEN
Employing tissue engineering principles aided by three-dimensional (3D) printing strategies to fabricate meniscus tissue constructs could help patients with meniscus injury regain mobility, improve pain management and reduce the risk of development of knee osteoarthritis. Here we report a 3D printed meniscus scaffold that biomimics the internal and bulk architecture of the menisci. A shear-thinning novel silk fibroin-gelatin-based bioink with high print fidelity was optimized for the fabrication of scaffolds to serve as potential meniscus implants. Physicochemical characterization of the fabricated scaffolds shows optimum swelling, degradation and mechanical properties. Further, the scaffolds were seeded with meniscus fibrochondrocytes to validate their bioactivity. Fibrochondrocytes seeded on the scaffolds maintained their phenotype and proliferation, and enhanced glycosaminoglycan and total collagen synthesis was observed. Gene expression profile, biochemical quantification and histological studies confirmed the ability of the scaffolds to form meniscus-like tissue constructs. The scaffolds were found to possess amenable immunocompatibility in vitro as well as in vivo. Due to their excellent biological and physicochemical characteristics, these 3D printed scaffolds may be fine-tuned into viable alternatives to the present clinical treatment approaches to meniscus repair.
Asunto(s)
Biomimética/métodos , Bioimpresión/métodos , Fibroínas/química , Menisco/química , Animales , Biomimética/instrumentación , Bioimpresión/instrumentación , Bombyx , Proliferación Celular , Gelatina/química , Humanos , Menisco/citología , Menisco/lesiones , Impresión Tridimensional , Prótesis e Implantes , Porcinos , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodos , Andamios del Tejido/químicaRESUMEN
OBJECTIVES: The goal of this study was to demonstrate feasibility of measuring extracellular pH in cartilage and meniscus using acidoCEST technique with a 3-dimensional ultrashort echo time readout (acidoCEST-UTE) magnetic resonance imaging (MRI). MATERIALS AND METHODS: Magnetization transfer ratio asymmetry, radiofrequency (RF) power mismatch, and relative saturation transfer were evaluated in liquid phantoms for iopromide, iopamidol, and iohexol over a pH range of 6.2 to 7.8, at various agent concentrations, temperatures, and buffer concentrations. Tissue phantoms containing cartilage and meniscus were evaluated with the same considerations for iopamidol and iohexol. Phantoms were imaged with the acidoCEST-UTE MRI sequence at 3 T. Correlation coefficients and coefficients of variations were calculated. Paired Wilcoxon rank-sum tests were used to evaluate for statistically significant differences. RESULTS: The RF power mismatch and relative saturation transfer analyses of liquid phantoms showed iopamidol and iohexol to be the most promising agents for this study. Both these agents appeared to be concentration independent and feasible for use with or without buffer and at physiologic temperature over a pH range of 6.2 to 7.8. Ultimately, RF power mismatch fitting of iohexol showed the strongest correlation coefficients between cartilage, meniscus, and fluid. In addition, ratiometric values for iohexol are similar among liquid as well as different tissue types. CONCLUSIONS: Measuring extracellular pH in cartilage and meniscus using acidoCEST-UTE MRI is feasible.
Asunto(s)
Fibrocartílago/química , Aumento de la Imagen/métodos , Imagenología Tridimensional/métodos , Imagen por Resonancia Magnética/métodos , Algoritmos , Estudios de Factibilidad , Humanos , Concentración de Iones de Hidrógeno , Yohexol/análogos & derivados , Yopamidol , Menisco/química , Fantasmas de ImagenRESUMEN
Most previous studies investigated the remarkably low and complex friction properties of meniscus and cartilage under constant loading and motion conditions. However, both load and relative velocity within the knee joint vary considerably during physiological activities. Hence, the question arises how friction of both tissues is affected by physiological testing conditions occurring during gait. As friction properties are of major importance for meniscal replacement devices, the influence of these simulated physiological testing conditions was additionally tested for a potential meniscal implant biomaterial. Using a dynamic friction testing device, three different friction tests were conducted to investigate the influence of either just varying the motion conditions or the normal load and also to replicate the physiological gait conditions. It could be shown for the first time that the friction coefficient during swing phase was statistically higher than during stance phase when varying both loading and motion conditions according to the physiological gait pattern. Further, the friction properties of the exemplary biomaterial were also higher, when tested under dynamic gait parameters compared to static conditions, which may suggest that static conditions can underestimate the friction coefficient rather than reflecting the in vivo performance.
Asunto(s)
Cartílago Articular/fisiología , Fricción , Marcha , Menisco/fisiología , Animales , Fenómenos Biomecánicos , Cartílago Articular/química , Bovinos , Menisco/química , Movimiento (Física) , Soporte de PesoRESUMEN
BACKGROUND: Meniscus tissue engineering has provided a great potential treatment for meniscal injuries. However, few scaffolds in meniscus tissue engineering have matched the mechanical properties of native meniscus. OBJECTIVE: In this study, we developed a composite scaffold using decellularized meniscus extracellular matrix (DMECM) and gelatin/chitosan (G/C) to explore a preferable ratio to enhance the elastic modulus and cytotoxicity properties of scaffolds. METHODS: The microstructure, porosity, cytotoxicity, and strength of the composite scaffolds were evaluated. The micro-architectures of the samples were evaluated using scanning electron microscope (SEM). Fourier Transform Infrared analysis (FTIR) was used to confirm the chemical structure with different type composite scaffolds. The compressive elastic modulus of all the scaffolds were measured by the universal tensile testing machine DNS300. Calcein-AM (fluorescent green) and propidium iodide (fluorescent red) were used to stain live cells and dead cells. Morphology and spatial distribution of cells within scaffolds were observed by confocal laser scanning microscopy FV 1000. RESULTS: SEM showed that the composite scaffolds had suitable porous structure. CCK-8 and live/dead staining demonstrated that the composite scaffolds had no cytotoxicity and could promote bone marrow mesenchymal stem cells (BMSCs) proliferation. The FTIR results demonstrated the successful mixing of these two elements, and the addition of DMECM improved the elastic modulus and cytotoxicity of G/C composite scaffolds. CONCLUSIONS: This study developed a composite scaffold using DMECM and G/C, and demonstrated that it might be suitable for meniscal tissue engineering application.
Asunto(s)
Quitosano/química , Matriz Extracelular/química , Gelatina/química , Menisco/citología , Células Madre Mesenquimatosas/citología , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Animales , Supervivencia Celular , Células Cultivadas , Módulo de Elasticidad , Ensayo de Materiales , Menisco/química , Porosidad , PorcinosRESUMEN
Degeneration of human meniscal tissue induces impairment of normal knee functions, and is a highly relevant etiology of knee joint tears and osteoarthritis. Currently, the grading scale of meniscus degeneration is conventionally derived from evaluating meniscal morphology and histological staining. However, mid-infrared attenuated total reflectance (IR-ATR) spectroscopy is a particularly useful technique that may analyze the biomolecular composition at a sample surface, and provide information on the intra- and/or inter-molecular chemical bonds. In the present study, 61 lyophilized human menisci samples at different grades of degeneration were analyzed via IR-ATR spectroscopy in a label-free fashion, and the data were evaluated via Gaussian peak fitting and 2D correlation analysis. During increasing meniscal degeneration (i.e., grade 1 to 4) along with calcification at grade 4, an evident blue shift of the amide I band (1700-1600 cm-1) was observed in the associated IR spectra. In addition, Gaussian peak fitting revealed significant area variance of the fitted sub-peaks. 2D correlation spectra provided further access to detailed changes of the amide I band during the degeneration process. Derived from this multi-tiered data analysis taking into account the protein secondary structure information within the amide I band, and the triple helical structure of meniscal collagen, the blue shift and peak area changes during meniscus degeneration are indicative of collagen fibril formation during evolving degeneration. Furthermore, a degradation of the water-binding proteoglycan and collagen network especially for degenerated menisci with calcification was observed. Results were compared with a collagen-chondroitin sulphate mixture model, confirming the observed changes in collagen fibrils and proteoglycans. In summary, this study confirms the utility of IR-ATR spectroscopy as a versatile tool providing access to meniscal tissue degeneration processes at molecular level detail, and may in future evolve into a useful diagnostic instrument for analyzing cartilage degeneration.
Asunto(s)
Menisco/química , Espectrofotometría Infrarroja/métodos , Anciano , Enfermedades de los Cartílagos/patología , Colágeno/química , Colágeno/metabolismo , Femenino , Humanos , Masculino , Menisco/patología , Persona de Mediana Edad , Estructura Secundaria de Proteína , Proteoglicanos/química , Proteoglicanos/metabolismoRESUMEN
Understanding the fundamental wetting behavior of liquids on surfaces with pores or cavities provides insights into the wetting phenomena associated with rough or patterned surfaces, such as skin and fabrics, as well as the development of everyday products such as ointments and paints, and industrial applications such as enhanced oil recovery and pitting during chemical mechanical polishing. We have studied, both experimentally and theoretically, the dynamics of the transitions from the unfilled/partially filled (Cassie-Baxter) wetting state to the fully filled (Wenzel) wetting state on intrinsically hydrophilic surfaces (intrinsic water contact angle <90°, where the Wenzel state is always the thermodynamically favorable state, while a temporary metastable Cassie-Baxter state can also exist) to determine the variables that control the rates of such transitions. We prepared silicon wafers with cylindrical cavities of different geometries and immersed them in bulk water. With bright-field and confocal fluorescence microscopy, we observed the details of, and the rates associated with, water penetration into the cavities from the bulk. We find that unconnected, reentrant cavities (i.e., cavities that open up below the surface) have the slowest cavity-filling rates, while connected or non-reentrant cavities undergo very rapid transitions. Using these unconnected, reentrant cavities, we identified the variables that affect cavity-filling rates: (i) the intrinsic contact angle, (ii) the concentration of dissolved air in the bulk water phase (i.e., aeration), (iii) the liquid volatility that determines the rate of capillary condensation inside the cavities, and (iv) the presence of surfactants.
Asunto(s)
Interacciones Hidrofóbicas e Hidrofílicas , Termodinámica , Humectabilidad , Aire , Fluoresceína/química , Menisco/química , Transición de Fase , Presión , Silicio/química , Solubilidad , Propiedades de Superficie , Tensoactivos/química , Volatilización , Agua/químicaRESUMEN
Exploiting a femtoliter liquid meniscus formed on a nanopipet is a powerful approach to spatially control mass transfer or chemical reaction at the nanoscale. However, the insufficient reliability of techniques for the meniscus formation still restricts its practical use. We report on a noncontact, programmable method to produce a femtoliter liquid meniscus that is utilized for parallel three-dimensional (3D) nanoprinting. The method based on electrohydrodynamic dispensing enables one to create an ink meniscus at a pipet-substrate gap without physical contact and positional feedback. By guiding the meniscus under rapid evaporation of solvent in air, we successfully fabricate freestanding polymer 3D nanostructures. After a quantitative characterization of the experimental conditions, we show that we can use a multibarrel pipet to achieve parallel fabrication process of clustered nanowires with precise placement. We expect this technique to advance productivity in nanoscale 3D printing.
Asunto(s)
Menisco/química , Nanoestructuras/química , Impresión TridimensionalRESUMEN
BACKGROUND: Calcium pyrophosphate dihydrate (CPPD) crystals are commonly observed in osteoarthritic joints. The aim of our study was to investigate the efficacy of a dual-energy computed tomography (DECT) for detecting CPPD crystals in knee meniscus. METHODS: Twenty-six patients undergoing primary total knee arthroplasty were included in the study. Radiographs of knee joint and synovial fluid specimens were analyzed for the presence of CPPD crystals. Meniscus extracted during surgery was scanned using DECT. Sensitivity and specificity of DECT and radiograph for detecting CPPD crystals were calculated against a reference standard (polarizing light microscopy of synovial fluid aspirate). Meniscus in which CPPD crystals were suspected with DECT was further examined to confirm the crystals using a polarized microscopy. RESULTS: CPPD crystals in synovial fluid were observed in 9 (36%) patients. The sensitivity and specificity of DECT in the detection of CPPD crystals, against microscopic identification, were 77.8 and 93.8%, respectively. The sensitivity and specificity of conventional radiography in the detection of CPPD crystals were 44.4 and 100%, respectively. DECT was able to detect the area where CPPD crystals were deposited in the meniscus. CONCLUSION: DECT provides good diagnostic sensitivity and specificity for detection of CPPD crystals in knee meniscus as well as spatial information about CPPD crystals. DECT is currently a research tool, but we believe that DECT can be a useful instrument to diagnose CPPD deposition disease, especially for the regions where aspiration is difficult to be performed such as pubic symphysis, atlantoaxial joint, interphalangeal joint.
Asunto(s)
Pirofosfato de Calcio/análisis , Condrocalcinosis/diagnóstico , Articulación de la Rodilla/química , Menisco/química , Artroplastia de Reemplazo de Rodilla , Cristalización , Femenino , Humanos , Articulación de la Rodilla/diagnóstico por imagen , Masculino , Menisco/diagnóstico por imagen , Osteoartritis de la Rodilla/metabolismo , Osteoartritis de la Rodilla/cirugía , Estudios Prospectivos , Radiografía , Sensibilidad y Especificidad , Líquido Sinovial/química , Tomografía Computarizada por Rayos X/métodosRESUMEN
Meniscal pathologies are among the most common injuries of the femorotibial joint in both human and equine patients. Pathological forces and ensuing injuries of the cranial horn of the equine medial meniscus are considered analogous to those observed in the human posterior medial horn. Biomechanical properties of human menisci are site- and depth- specific. However, the influence of equine meniscus topography and composition on its biomechanical properties is yet unknown. A better understanding of equine meniscus composition and biomechanics could advance not only veterinary therapies for meniscus degeneration or injuries, but also further substantiate the horse as suitable translational animal model for (human) meniscus tissue engineering. Therefore, the aim of this study was to investigate the composition and structure of the equine knee meniscus in a site- and age-specific manner and their relationship with potential site-specific biomechanical properties. The meniscus architecture was investigated histologically. Biomechanical testing included evaluation of the shore hardness (SH), stiffness and energy loss of the menisci. The SH was found to be subjected to both age and site-specific changes, with an overall higher SH of the tibial meniscus surface and increase in SH with age. Stiffness and energy loss showed neither site nor age related significant differences. The macroscopic and histologic similarities between equine and human menisci described in this study, support continued research in this field.
Asunto(s)
Caballos/anatomía & histología , Menisco/anatomía & histología , Menisco/fisiología , Envejecimiento , Animales , Fenómenos Biomecánicos , Colágeno/análisis , Fuerza Compresiva , Femenino , Marcha , Glicosaminoglicanos/análisis , Dureza , Pruebas de Dureza , Masculino , Menisco/química , Rodilla de Cuadrúpedos/anatomía & histología , Rodilla de Cuadrúpedos/fisiología , Relación Estructura-Actividad , Microtomografía por Rayos XRESUMEN
BACKGROUND: Iron as a cofactor of enzymes takes part in the synthesis of the bone matrix. Severe deficiency of iron reduces the strength and mineral density of bones, whereas its excess may increase oxidative stress. In this context, it is essential to determine the iron content in knee joint tissues. OBJECTIVES: The study objective was to determine the level of iron in the tissues of the knee joint, i.e., in the femoral bone, tibia and meniscus. MATERIAL AND METHODS: Material for analysis was obtained during endoprosthetic surgery of the knee joint. Within the knee joint, the tibia, femur and meniscus were analyzed. Samples were collected from 50 patients, including 36 women and 14 men. The determination of iron content was performed with the ICP-AES method, using Varian 710-ES. RESULTS: The lowest iron content was in the tibia (27.04 µg/g), then in the meniscus (38.68 µg/g) and the highest in the femur (41.93 µg/g). Statistically significant differences were noted in the content of iron in knee joint tissues. CONCLUSIONS: In patients who underwent endoprosthesoplasty of the knee joint, statistically significant differences were found in the levels of iron in various components of the knee joint. The highest iron content was found in the femoral bone of the knee joint and then in the meniscus, the lowest in the tibia. The differences in iron content in the knee joint between women and men were not statistically significant.
Asunto(s)
Hierro/análisis , Articulación de la Rodilla/química , Anciano , Femenino , Fémur/química , Humanos , Masculino , Menisco/química , Caracteres Sexuales , Espectrofotometría Atómica , Tibia/químicaRESUMEN
Advances in cartilage tissue engineering have led to constructs with mechanical integrity and biochemical composition increasingly resembling that of native tissues. In particular, collagen cross-linking with lysyl oxidase has been used to significantly enhance the mechanical properties of engineered neotissues. In this study, development of collagen cross-links over time, and correlations with tensile properties, were examined in self-assembling neotissues. Additionally, quantitative MRI metrics were examined in relation to construct mechanical properties as well as pyridinoline cross-link content and other engineered tissue components. Scaffold-free meniscus fibrocartilage was cultured in the presence of exogenous lysyl oxidase, and assessed at multiple time points over 8weeks starting from the first week of culture. Engineered constructs demonstrated a 9.9-fold increase in pyridinoline content, reaching 77% of native tissue values, after 8weeks of culture. Additionally, engineered tissues reached 66% of the Young's modulus in the radial direction of native tissues. Further, collagen cross-links were found to correlate with tensile properties, contributing 67% of the tensile strength of engineered neocartilages. Finally, examination of quantitative MRI metrics revealed several correlations with mechanical and biochemical properties of engineered constructs. This study displays the importance of culture duration for collagen cross-link formation, and demonstrates the potential of quantitative MRI in investigating properties of engineered cartilages. STATEMENT OF SIGNIFICANCE: This is the first study to demonstrate near-native cross-link content in an engineered tissue, and the first study to quantify pyridinoline cross-link development over time in a self-assembling tissue. Additionally, this work shows the relative contributions of collagen and pyridinoline to the tensile properties of collagenous tissue for the first time. Furthermore, this is the first investigation to identify a relationship between qMRI metrics and the pyridinoline cross-link content of an engineered collagenous tissue.
Asunto(s)
Fibrocartílago/química , Imagen por Resonancia Magnética , Menisco/química , Proteína-Lisina 6-Oxidasa/química , Andamios del Tejido/química , Animales , Bovinos , Módulo de ElasticidadRESUMEN
Understanding how human meniscal tissue responds to loading regimes mimetic of daily life as well as how it compares to larger animal models is critical in the development of a functionally accurate synthetic surrogate. Seven human and eight ovine cadaveric meniscal specimens were regionally sectioned into cylinders 5 mm in diameter and 3 mm thick along with 10 polystyrene-b-polyethylene oxide block copolymer-based thermoplastic elastomer (TPE) hydrogels. Samples were compressed to 12% strain at 1 Hz for 5000 cycles, unloaded for 24 h, and then retested. No differences were found within each group between test one and test two. Human and ovine tissue exhibited no regional dependency (p < 0.05). Human samples relaxed quicker than ovine tissue or the TPE hydrogel with modulus values at cycle 50 not significantly different from cycle 5000. Ovine menisci were found to be similar to human menisci in relaxation profile but had significantly higher modulus values (3.44 MPa instantaneous and 0.61 MPa after 5000 cycles compared with 1.97 and 0.11 MPa found for human tissue) and significantly different power law fit coefficients. The TPE hydrogel had an initial modulus of 0.58 MPa and experienced less than a 20% total relaxation over the 5000. Significant differences in the magnitude of compressive modulus between human and ovine menisci were observed, however the relaxation profiles were similar. Although statistically different than the native tissues, modulus values of the TPE hydrogel material were similar to those of the human and ovine menisci, making it a material worth further investigation for use as a synthetic replacement. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2722-2728, 2017.