ABSTRACT
The present work proposes a new UHPLC-PDA-fluorescence method able to identify and quantify the main polyphenols present in commercial fruit juices in a 28-min chromatogram. The proposed method improve the IFU method No. 71 used to evaluate anthocyanins profiles of fruit juices. Fruit juices of strawberry, American cranberry, bilberry, sour cherry, black grape, orange, and apple, were analysed identifying 70 of their main polyphenols (23 anthocyanins, 15 flavonols, 6 hydroxybenzoic acids, 14 hydroxycinnamic acids, 4 flavanones, 2 dihydrochalcones, 4 flavan-3-ols and 2 stilbenes). One standard polyphenol of each group was used to calculate individual polyphenol concentration presents in a juice. Total amount of polyphenols in a fruit juice was estimated as total individual polyphenols (TIP). A good correlation (r(2)=0.966) was observed between calculated TIP, and total polyphenols (TP) determined by the well-known colorimetric Folin-Ciocalteu method. In this work, the higher TIP value corresponded to bilberry juice (607.324 mg/100mL fruit juice) and the lower to orange juice (32.638 mg/100mL fruit juice). This method is useful for authentication analyses and for labelling total polyphenols contents of commercial fruit juices.
Subject(s)
Beverages/analysis , Chromatography, High Pressure Liquid/methods , Fruit/chemistry , Polyphenols/analysisABSTRACT
Mature cactus pears from Opuntia stricta have a dark purple color due to high betacyanin concentration, whose biosynthesis is initiated with the amino acid L-tyrosine as a primary precursor. This study followed the maturation and ripening processes of Opuntia stricta fruits to harvest them at high betacyanin and other antioxidant concentrations. Fruits lasted 9 months for final ripening. Physical and compositional changes at different maturation and ripening stages have been determined. Thus, ripe fruits were around 4.72 ± 0.10 cm length, 2.94 ± 0.05 cm diameter and 22.71 ± 0.20 g weight; moisture and pH were maintained at 87.05 ± 0.19 % and 3.37 ± 0.12, respectively. Purple pigment production started in the ovary of immature fruits four months after anthesis (MAA). Concentration of all analyzed metabolites increased from immature (4 MAA) until ripe (9 MAA) stage. In ripe fruits, reducing sugars were 4.72 ± 0.54 g/100 g ff and total phenols 135.17 ± 0.68 mg gallic acid/100 g ff. Metabolites identified by HPLC were the betacyanins: betanin (60.17 ± 1.08 mg/100 g ff), isobetanin (7.58 ± 0.94 mg/100 g ff) and betanidin (13.48 ± 0.87 mg/100 g ff). Also, L-ascorbic acid (35.03 ± 1.06 mg/100 g ff) and L-tyrosine (4.43 ± 0.73 mg/100 g ff) were determined. Furthermore, the addition of L-tyrosine or L-dopa to fruit pulp of moderately ripe fruits, increased betacyanin concentrations 17 (103.3 ± 3.8 mg/100 g) and 32 % (114.3 ± 4.1 mg/100 g), respectively.
Subject(s)
Antioxidants/analysis , Betacyanins/analysis , Fruit/chemistry , Opuntia/chemistry , Pigments, Biological/metabolism , Plant Extracts/chemistry , Antioxidants/isolation & purification , Antioxidants/metabolism , Betacyanins/isolation & purification , Betacyanins/metabolism , Biomass , Biosynthetic Pathways , Carbohydrate Metabolism , Carbohydrates/analysis , Fruit/growth & development , Fruit/metabolism , Levodopa/metabolism , Opuntia/growth & development , Opuntia/metabolism , Phenols/analysis , Phenols/isolation & purification , Pigments, Biological/analysis , Plant Extracts/isolation & purification , Tyrosine/metabolismABSTRACT
Fermentation of juice and homogenized fruits of Opuntia stricta fruits has been developed and optimized. The aim was to obtain the red food colorant betanin from prickly pear, at high concentration and low viscosity. Among three strains assayed, Saccharomyces cerevisiae var. bayanus AWRI 796 has been the optimum for this process. The optimum temperature value was found to be 35 degrees C for both sugar consumption and pigment preservation. After fermentation, biomass and residual vegetal tissue were discarded by centrifugation. Supernatant was concentrated under vacuum. Therefore, liquid concentrated betanin was obtained, with low viscosity and being sugar free. Besides, bioethanol was obtained as byproduct. Characteristics of the final product obtained were pH 3.41, 5.2 degrees Brix, 9.65 g/L betanin, color strength of 10.8, and viscosity of 52.5 cP. These values are better than obtained by other procedures.
Subject(s)
Betalains/analysis , Coloring Agents/analysis , Fermentation , Fruit/metabolism , Opuntia/metabolism , Saccharomyces cerevisiae/metabolism , Betacyanins/analysis , Beverages/analysis , Carbohydrate Metabolism , Fruit/chemistry , Opuntia/chemistry , Plant Extracts/chemistry , TemperatureABSTRACT
The L(-)-carnitine production by biotransformation using the recombinant strain Escherichia coli pT7-5KE32 has been studied and optimized with crotonobetaine and D(+)-carnitine as substrates. A resting rather than a growing cells system for L(-)-carnitine production was chosen, crotonobetaine being the best substrate. High biocatalytic activity was obtained after growing the cells under anaerobic conditions at 37 degrees C and with crotonobetaine or L(-)-carnitine as inducer. The growth incubation temperature (37 degrees C) was high enough as to activate the heat-inducible lambdap(L) promoter inserted in the plasmid pGP1-2. The best biotransformation conditions were with resting cells, under aerobiosis, with 4 g l(-1) and 100 mM biomass and substrate concentrations respectively. Under these conditions the biotransformation time (1 h) was shorter and the L(-)-carnitine yield (70%) higher than previously reported. Consequently productivity value (11.3 g l(-1)h(-1)) was highly improved when comparing with other published works. The resting cells could be reused until eight times maintaining product yield levels well over 50% that meant to increase ten times the L(-)-carnitine obtained per gram of biomass.
ABSTRACT
The thermal stability of the lipase from Chromobacterium viscosum was assessed by deactivation (loss of activity), fluorescence, circular dichroism (CD) and static light scattering (SLS) measurements. Lipase fluorescence emission is dominated by the tryptophyl contribution. An increase in the tyrosyl contribution from 2 to 16% was only observed upon prolonged incubation at 60 degrees C. The effect of temperature on the tryptophyl quantum yield was studied and two activation energies were calculated. Tryptophan residues in the native structure have an activation energy of 1.9 kcal mol(-1) for temperature-dependent non-radiative deactivation of the excited state. A structural change occurs at approximately 66.7 degrees C and the activation energy increases to 10.2 kcal mol(-1). This structural change is not characterized by tryptophan exposure on the surface of the protein. The deactivation and the evolution of structural changes with time after lipase incubation at 60 degrees C were assessed by fluorescence, CD and SLS measurements. CD spectra show that both secondary and tertiary structures remain native-like after incubation at 60 degrees C in spite of the fluorescence changes observed (red-shift from 330 to 336 nm on the trytophyl emission). SLS measurements together with the CD data show that deactivation may be due to protein association between native molecules. Deactivation and the decrease on the fraction of non-associated native lipase evaluated by changes in fluorescence intensity with time, show apparent first order kinetics. According to the rate constants, fluorescence changes precede deactivation pointing to an underestimation of the deactivation. Reactivation upon dilution during the activity assay and substrate-induced reactivation due to lipase interfacial adsorption are possible causes for this underestimation.
Subject(s)
Chromobacterium/enzymology , Lipase/chemistry , Chemical Phenomena , Chemistry, Physical , Circular Dichroism , Enzyme Stability , Light , Lipase/metabolism , Models, Molecular , Protein Conformation , Scattering, Radiation , Spectrometry, Fluorescence , Tryptophan/chemistryABSTRACT
L(-)-carnitine was produced from D(+)-carnitine by resting cells of Escherichia coli O44 K74. Oxygen did not inhibit either the carnitine transport system or the enzymes involved in the biotransformation process. Aerobic conditions led to higher product yield than anaerobic conditions. The biotransformation yield depended both on biomass and initial substrate concentrations used; the selected values for these variables were 4.30 g l-1 cells and 100 mmol l-1 D(+)-carnitine. Under these conditions the L(-)-carnitine production rate was 0.55 g l-1 h-1, the process yield was 44%, and the productivity was 0.22 g l-1 h-1 after a 30 h incubation period. Crotonobetaine production, besides L(-)-carnitine, showed that the action of more than one enzyme occurred during the biotransformation process. On the other hand, the addition of fumarate at high substrate concentrations (250 and 500 mmol l-1) led to a higher metabolic activity, which meant an increment of L(-)-carnitine production.