Characterization of the effect of chromium salts on tropocollagen molecules and molecular aggregates.

Though the capability of chromium treatment to improve the stability and mechanical properties of collagen fibrils is well-known, the influence of different chromium salts on collagen molecules (tropocollagen) is not well characterized. In this study, the effect of Cr3+ treatment on the conformation and hydrodynamic properties of collagen was studied using atomic force microscopy (AFM) and dynamic light scattering (DLS). Statistical analysis of contours of adsorbed tropocollagen molecules using the two-dimensional worm-like chain model revealed a reduction of the persistence length (i.e., the increase of flexibility) from ≈72 nm in water to ≈56-57 nm in chromium (III) salt solutions. DLS studies demonstrated an increase of the hydrodynamic radius from ≈140 nm in water to ≈190 nm in chromium (III) salt solutions, which is associated with protein aggregation. The kinetics of collagen aggregation was shown to be ionic strength dependent. Collagen molecules treated with three different chromium (III) salts demonstrated similar properties such as flexibility, aggregation kinetics, and susceptibility to enzymatic cleavage. The observed effects are explained by a model that considers the formation of chromium-associated intra- and intermolecular crosslinks. The obtained results provide novel insights into the effect of chromium salts on the conformation and properties of tropocollagen molecules.

The influence of AGEs and enzymatic cross-links on the mechanical properties of collagen fibrils.

Collagen, one of the main building blocks for various tissues, derives its mechanical properties directly from its structure of cross-linked tropocollagen molecules. The cross-links are considered to be a key component of collagen fibrils as they can change the fibrillar behavior in various ways. For instance, enzymatic cross-links (ECLs), one particular type of cross-links, are known for stabilizing the structure of the fibril and improving material properties, while cross-linking AGEs (Advanced-Glycation Endproducts) have been shown to accumulate and impair the mechanical properties of collageneous tissues. However, the reasons for whether and how a given type of cross-link improves or impairs the material properties remain unknown, and the exact relationship between the cross-link properties and density, and the fibrillar behavior is still not well understood. Here, we use coarse-grained steered molecular models to evaluate the effect of AGEs and ECLs cross-links content on the deformation and failure properties of collagen fibrils. Our simulations show that the collagen fibrils stiffen at high strain levels when the AGEs content exceeds a critical value. In addition, the strength of the fibril increases with AGEs accumulation. By analyzing the forces within the different types of cross-links (AGEs and ECLs) as well as their failure, we demonstrate that a change of deformation mechanism is at the origin of these observations. A high AGEs content reinforces force transfer through AGEs cross-links rather than through friction between sliding tropocollagen molecules, which leads to failure by breaking of bonds within the tropocollagen molecules. We show that this failure mechanism, which is associated with lower energy dissipation, results in more abrupt failure of the collagen fibril. Our results provide a direct and causal link between increased AGEs content, inhibited intra-fibrillar sliding, increased stiffness, and abrupt fibril fracture. Therefore, they explain the mechanical origin of bone brittleness as commonly observed in elderly and diabetic populations. Our findings contribute to a better understanding of the mechanisms underlying impaired tissue behavior due to elevated AGEs content and could enable targeted measures regarding the reduction of specific collagen cross-linking levels.

Strain-induced collagen denaturation is rate dependent in failure of cerebral arteries.

While soft tissues are commonly damaged by mechanical loading, the manifestation of this damage at the microstructural level is not fully understood. Specifically, while rate-induced stiffening has been previously observed in cerebral arteries, associated changes in microstructural damage patterns following high-rate loading are largely undefined. In this study, we stretched porcine middle cerebral arteries to failure at 0.01 and >150 s-1, both axially and circumferentially, followed by probing for denatured tropocollagen using collagen hybridizing peptide (CHP). We found that collagen fibrils aligned with the loading direction experienced less denaturation following failure tests at high than low rates. Others have demonstrated similar rate dependence in tropocollagen denaturation during soft tissue failure, but this is the first study to quantify this behavior using CHP and to report it for cerebral arteries. These findings may have significant implications for traumatic brain injury and intracranial balloon angioplasty. We additionally observed possible tropocollagen denaturation in vessel layers primarily composed of fibrils transversely aligned to the loading axis. To our knowledge, this is the first observation of collagen denaturation due to transverse loading, but further research is needed to confirm this finding. STATEMENT OF SIGNIFICANCE: Previous work shows that collagen hybridizing peptide (CHP) can be used to identify collagen molecule unfolding and denaturation in mechanically overloaded soft tissues, including the cerebral arteries. But experiments have not explored collagen damage at rates relevant to traumatic brain injury. In this work, we quantified collagen damage in cerebral arteries stretched to failure at both high and low rates. We found that the collagen molecule is less damaged at high than at low rates, suggesting that damage mechanisms of either the collagen molecule or other elements of the collagen superstructure are rate dependent. This work implies that arteries failed at high rates, such as in traumatic brain injury, will have different molecular-level damage patterns than arteries failed at low rates. Consequently, improved understanding of damage characteristics may be expanded in the future to better inform clinically relevant cases of collagen damage such as angioplasty and injury healing.

Collagen pre-strain discontinuity at the bone-Cartilage interface.

The bone-cartilage unit (BCU) is a universal feature in diarthrodial joints, which is mechanically-graded and subjected to shear and compressive strains. Changes in the BCU have been linked to osteoarthritis (OA) progression. Here we report existence of a physiological internal strain gradient (pre-strain) across the BCU at the ultrastructural scale of the extracellular matrix (ECM) constituents, specifically the collagen fibril. We use X-ray scattering that probes changes in the axial periodicity of fibril-level D-stagger of tropocollagen molecules in the matrix fibrils, as a measure of microscopic pre-strain. We find that mineralized collagen nanofibrils in the calcified plate are in tensile pre-strain relative to the underlying trabecular bone. This behaviour contrasts with the previously accepted notion that fibrillar pre-strain (or D-stagger) in collagenous tissues always reduces with mineralization, via reduced hydration and associated swelling pressure. Within the calcified part of the BCU, a finer-scale gradient in pre-strain (0.6% increase over ~50µm) is observed. The increased fibrillar pre-strain is linked to prior research reporting large tissue-level residual strains under compression. The findings may have biomechanical adaptative significance: higher in-built molecular level resilience/damage resistance to physiological compression, and disruption of the molecular-level pre-strains during remodelling of the bone-cartilage interface may be potential factors in osteoarthritis-based degeneration.

Healing Process, Pain, and Health-Related Quality of Life in Patients with Venous Leg Ulcers Treated with Fish Collagen Gel: A 12-Week Randomized Single-Center Study.

The aim of the study was to assess the effectiveness of fish skin collagen and its impact on healing, pain intensity, and quality of life in patients with venous leg ulcers (VLUs). This study included 100 adults with VLUs. Eligible patients were randomized to either tropocollagen gel treatment (group A, n = 47) or placebo alone (group B, n = 45). We applied the gel to the periwound skin for 12 weeks. All groups received standard wound care, including class 2 compression therapy and wound hygiene procedures. We assessed the healing rate (cm2/week) and quality of life (QoL) using the Skindex-29 and CIVIQ scales. In group A, more ulcers healed, and the healing rate was faster. In both study groups, patients showed a significant improvement in quality of life after the intervention, but there was a greater improvement in the tropocollagen group. In group A, the greatest improvement was related to physical symptoms and the pain dimension. This study showed that the application of fish collagen gel to the periwound skin improves the healing process and QoL in patients with VLUs. The 12-week treatment with collagen reduced the severity of physical complaints, pain, and local skin symptoms, which determined the quality of life in patients with VLUs to the greatest extent.

Finite element modeling of α-helices and tropocollagen molecules referring to spike of SARS-CoV-2.

The newly developed finite element (FE) modeling at the atomic scale was used to predict the static and dynamic response of the α-helix (AH) and tropocollagen (TC) protein fragments, the main building blocks of the spike of the SARS-CoV-2. The geometry and morphology of the spike's stalk and its connection to the viral envelope were determined from the combination of most recent molecular dynamics (MD) simulation and images of cryoelectron microscopy. The stiffness parameters of the covalent bonds in the main chain of the helix were taken from the literature. The AH and TC were modeled using both beam elements (wire model) and shell elements (ribbon model) in FE analysis to predict their mechanical properties under tension. The asymptotic stiffening features of AH and TC under tensile loading were revealed and compared with a new analytical solution. The mechanical stiffnesses under other loading conditions, including compression, torsion, and bending, were also predicted numerically and correlated with the results of the existing MD simulations and tests. The mode shapes and natural frequencies of the spike were predicted using the built FE model. The frequencies were shown to be within the safe range of 1-20 MHz routinely used for medical imaging and diagnosis by means of ultrasound. These results provide a solid theoretical basis for using ultrasound to study damaging coronavirus through transient and resonant vibration at large deformations.

Mechanistic Insight into the Fragmentation of Type I Collagen Fibers into Peptides and Amino Acids by a Vibrio Collagenase.

Vibrio collagenases of the M9A subfamily are closely related to Vibrio pathogenesis for their role in collagen degradation during host invasion. Although some Vibrio collagenases have been characterized, the collagen degradation mechanism of Vibrio collagenase is still largely unknown. Here, an M9A collagenase, VP397, from marine Vibrio pomeroyi strain 12613 was characterized, and its fragmentation pattern on insoluble type I collagen fibers was studied. VP397 is a typical Vibrio collagenase composed of a catalytic module featuring a peptidase M9N domain and a peptidase M9 domain and two accessory bacterial prepeptidase C-terminal domains (PPC domains). It can hydrolyze various collagenous substrates, including fish collagen, mammalian collagens of types I to V, triple-helical peptide [(POG)10]3, gelatin, and 4-phenylazobenzyloxycarbonyl-Pro-Leu-Gly-Pro-o-Arg (Pz-peptide). Atomic force microscopy (AFM) observation and biochemical analyses revealed that VP397 first assaults the C-telopeptide region to dismantle the compact structure of collagen and dissociate tropocollagen fragments, which are further digested into peptides and amino acids by VP397 mainly at the Y-Gly bonds in the repeating Gly-X-Y triplets. In addition, domain deletion mutagenesis showed that the catalytic module of VP397 alone is capable of hydrolyzing type I collagen fibers and that its C-terminal PPC2 domain functions as a collagen-binding domain during collagenolysis. Based on our results, a model for the collagenolytic mechanism of VP397 is proposed. This study sheds light on the mechanism of collagen degradation by Vibrio collagenase, offering a better understanding of the pathogenesis of Vibrio and helping in developing the potential applications of Vibrio collagenase in industrial and medical areas. IMPORTANCE Many Vibrio species are pathogens and cause serious diseases in humans and aquatic animals. The collagenases produced by pathogenic Vibrio species have been regarded as important virulence factors, which occasionally exhibit direct pathogenicity to the infected host or facilitate other toxins' diffusion through the digestion of host collagen. However, our knowledge concerning the collagen degradation mechanism of Vibrio collagenase is still limited. This study reveals the degradation strategy of Vibrio collagenase VP397 on type I collagen. VP397 binds on collagen fibrils via its C-terminal PPC2 domain, and its catalytic module first assaults the C-telopeptide region and then attacks the Y-Gly bonds in the dissociated tropocollagen fragments to release peptides and amino acids. This study offers new knowledge regarding the collagenolytic mechanism of Vibrio collagenase, which is helpful for better understanding the role of collagenase in Vibrio pathogenesis and for developing its industrial and medical applications.

Multiscale approach incorporating tropocollagen scale to assess the effect of molecular age-related modifications on elastic constants of cortical bone based on finite element and homogenization methods.

With osteoporosis and aging, structural changes occur at all hierarchical levels of bone from the molecular scale to the whole tissue, which requires multiscale modeling to analyze the effect of these modifications on the mechanical behavior of bone and its remodeling process. In this paper, a novel hybrid multiscale model for cortical bone incorporating the tropocollagen molecule based on the combination of finite element method and different homogenization techniques was developed. The objective was to investigate the influence of age-related structural alterations that occur at the molecular level, namely the decrease in both molecular diameter (due to the loss of hydration) and number of hydrogen bonds, on mechanical properties of the bone tissue. The proposed multiscale hierarchical approach is divided in two phases: (i) in Step 0, a realistic 3D finite element model for tropocollagen was used to estimate the effective elastic properties at the molecular scale as a function of the collagen molecule's degree of hydration (represented by its external diameter) and the number of its intramolecular hydrogen bonds, and (ii) in Steps 1-10, the effective elastic constants at the higher scales from mineralized fibril to continuum cortical bone tissue were predicted analytically using homogenization equations. The results obtained in healthy mature cortical bone at different scales are in good agreement with the experimental data and multiscale models reported in the literature. Moreover, our model made it possible to visualize the influence of the two parameters (molecular diameter and number of hydrogen bonds) that represent the main age-related alterations at the molecular scale on the mechanical properties of cortical bone, at its different hierarchical levels. Keywords: Bone aging, multiscale model, tropocollagen, cortical bone, finite element modeling, homogenization method.

Tropocollagen springs allow collagen fibrils to stretch elastically.

The mechanical properties of connective tissues are tailored to their specific function, and changes can lead to dysfunction and pathology. In most mammalian tissues the mechanical environment is governed by the micro- and nano-scale structure of collagen and its interaction with other tissue components, however these hierarchical properties remain poorly understood. In this study we use the human cornea as a model system to characterise and quantify the dominant deformation mechanisms of connective tissue in response to cyclic loads of physiological magnitude. Synchronised biomechanical testing, x-ray scattering and 3D digital image correlation revealed the presence of two dominant mechanisms: collagen fibril elongation due to a largely elastic, spring-like straightening of tropocollagen supramolecular twist, and a more viscous straightening of fibril crimp that gradually increased over successive loading cycles. The distinct mechanical properties of the two mechanisms suggest they have separate roles in vivo. The elastic, spring-like mechanism is fast-acting and likely responds to stresses associated with the cardiac cycle, while the more viscous crimp mechanism will respond to slower processes, such as postural stresses. It is anticipated that these findings will have broad applicability to understanding the normal and pathological functioning of other connective tissues such as skin and blood vessels that exhibit both helical structures and crimp. STATEMENT OF SIGNIFICANCE: The tropocollagen spring mechanism allows collagen fibrils from some tissues to elongate significantly under small loads, and its recent discovery has the potential to change our fundamental understanding of how tissue deforms. This time-resolved study quantifies the contribution of the spring mechanism to the local strain in stretched tissue and compares it to the contribution associated with the straightening of fibril waviness, the widely accepted primary low-load strain mechanism. The spring mechanism contributed more to the local tissue strain than fibril straightening, and was found to be elastic while fibril straightening was more viscous. The results suggest that the viscoelastic behaviour of a biomaterial is controlled, at least in part, by the relative amount of fibril-scale crimp and tropocollagen supramolecular twist.

Insights into anti-D formation in carriers of RhD variants through studies of 3D intraprotein interactions.

BACKGROUND: Many RhD variants associated with anti-D formation (partial D) in carriers exposed to the conventional D antigen carry mutations affecting extracellular loop residues. Surprisingly, some carry mutations affecting transmembrane or intracellular domains, positions not thought likely to have a major impact on D epitopes. STUDY DESIGN AND METHODS: A wild-type Rh trimer (RhD1 RhAG2 ) was modeled by comparative modeling with the human RhCG structure. Taking trimer conformation, residue accessibility, and position relative to the lipid bilayer into account, we redefine the domains of the RhD protein. We generated models for RhD variants carrying one or two amino acid substitutions associated with anti-D formation in published articles (25 variants) or abstracts (12 variants) and for RHD*weak D type 38. We determined the extracellular substitutions and compared the interactions of the variants with those of the standard RhD. RESULTS: The findings of the three-dimensional (3D) analysis were correlated with anti-D formation for 76% of RhD variants: 15 substitutions associated with anti-D formation concerned extracellular residues, and structural differences in intraprotein interactions relative to standard RhD were observed in the others. We discuss the mechanisms by which D epitopes may be modified in variants in which the extracellular residues are identical to those of standard RhD and provide arguments for the benignity of p.T379M (RHD*DAU0) and p.G278D (RHD*weak D type 38) in transfusion medicine. CONCLUSION: The study of RhD intraprotein interactions and the precise redefinition of residue accessibility provide insight into the mechanisms through which RhD point mutations may lead to anti-D formation in carriers.

Frequency dependent inelastic response of collagen architecture of pig dermis under cyclic tensile loading: An experimental study.

The evaluation of collagen architecture of the dermis in response to mechanical stimulation is important as it affects the macroscopic mechanical properties of the dermis. A detailed understanding of the processes involved in the alteration of the collagen structure is required to correlate the mechanical stimulation with tissue remodeling. This study investigated the effect of cyclic frequencies i.e. low (0.1 Hz), medium (2.0 Hz), and high (5.0 Hz) (physiological range) in the alteration of pig dermis collagen structure and its correlation with the macroscopic mechanical response of the dermis. The assessment of the collagen structure of virgin and mechanical tested specimens at tropocollagen, collagen fibril, and fiber level was performed using Fourier-transform infrared-attenuated total reflection (FTIR-ATR), atomic force microscopy (AFM), and scanning electron microscopy (SEM) respectively. After 103 cycles, a significantly higher alteration in collagen structure with discrete plastic-type damage was found for low frequency. This frequency dependent alteration of the collagen structure was found in correlation with the dermis macroscopic response. The value of inelastic strain, stress softening, damage parameter (reduction in elastic modulus), and reduction in energy dissipation were observed significantly large for slow frequency. A power-law based empirical relations, as a function of frequency and number of cycles, were proposed to predict the value of inelastic strain and damage parameter. This study also suggests that hierarchical structural response against the mechanical stimulation is time-dependent rather than cycle-dependent, may affect the tissue remodeling.

Embrittlement of collagen in early-stage human osteoarthritis.

Articular cartilage is a remarkable material with mechanical performance that surpasses engineering standards. Collagen, the most abundant protein in cartilage, plays an important role in this performance, and also in disease. Building on observations of network-level collagen changes at the earliest stages of osteoarthritis, this study explores the physical role of the collagen fibril in the disease process. Specifically, we focus on the material properties of collagen fibrils in the cartilage surface. Ten human tibial plateaus were characterised by atomic force microscopy (AFM) and Raman spectroscopy, with histological scoring used to define disease state. Measures of tropocollagen remained stable with disease progression, yet a marked mechanical change was observed. A slight stiffening coupled with a substantial decrease in loss tangent suggests a physical embrittlement caused by increased inter-molecular interactions.

Numerical modeling of the effects hydration and number of hydrogen bonds on the mechanical properties of the tropocollagen molecule.

Bone aging involves structural and molecular modifications, especially at the level of type I tropocollagen. This macromolecule shows two main age-related alterations, which are the decrease of both molecular diameter (due to the loss of hydration) and number of hydrogen bonds. In this work, it is proposed to investigate the influence of these two parameters (molecular diameter and number of hydrogen bonds) on the mechanical behavior of tropocollagen using finite element method. To this end, a novel three-dimensional finite element model of collagen molecule accounting for hydrogen bonds was developed. Then, a numerical design of experiments for the diameter of tropocollagen and variations in the number of hydrogen bonds has been established. The mechanical properties ("load-strain" curve and apparent Young's modulus) of the collagen molecule were obtained by employing the proposed model to uniaxial tensile tests. The parametric study demonstrates that the mechanical properties of tropocollagen are slightly affected by the rate of hydration but considerably affected by variation of the number of hydrogen bonds. Finally, a fitted analytical function was deduced from the above results showing effects of the two parameters (hydration rate and hydrogen bonds) on the apparent Young's modulus of tropocollagen. This study could be useful to understand the influence of structural age modifications of tropocollagen on the macroscopic mechanical properties of bone.

Effect of collagenase-gelatinase ratio on the mechanical properties of a collagen fibril: a combined Monte Carlo-molecular dynamics study.

Loading in cartilage is supported primarily by fibrillar collagen, and damage will impair the function of the tissue, leading to pathologies such as osteoarthritis. Damage is initiated by two types of matrix metalloproteinases, collagenase and gelatinase, that cleave and denature the collagen fibrils in the tissue. Experimental and modeling studies have revealed insights into the individual contributions of these two types of MMPs, as well as the mechanical response of intact fibrils and fibrils that have experienced random surface degradation. However, no research has comprehensively examined the combined influences of collagenases and gelatinases on collagen degradation nor studied the mechanical consequences of biological degradation of collagen fibrils. Such preclinical examinations are required to gain insights into understanding, treating, and preventing degradation-related cartilage pathology. To develop these insights, we use sequential Monte Carlo and molecular dynamics simulations to probe the effect of enzymatic degradation on the structure and mechanics of a single collagen fibril. We find that the mechanical response depends on the ratio of collagenase to gelatinase-not just the amount of lost fibril mass-and we provide a possible mechanism underlying this phenomenon. Overall, by characterizing the combined influences of collagenases and gelatinases on fibril degradation and mechanics at the preclinical research stage, we gain insights that may facilitate the development of targeted interventions to prevent the damage and loss of mechanical integrity that can lead to cartilage pathology.

Worm-like chain model extensions for highly stretched tropocollagen molecules.

Tropocollagen plays a very important role in the load bearing functionality of soft tissues. In the context of multi-scale modeling the response of tropocollagen molecules to stretch should be very carefully predicted in order to describe the mechanical behavior of soft tissues. To this end, the worm-like chain (WLC) model is often applied, although it is restricted to the entropic force regime which is essential at moderate deformations. To describe molecular forces under larger stretches several extensions of the WLC have been proposed for deoxyribonucleic acid (DNA). This contribution aims to investigate the applicability of these models in the context of tropocollagen and discusses the feasibility of their application. Finally, the models are validated in comparison to experimental data available in the literature.

Steered molecular dynamics characterization of the elastic modulus and deformation mechanisms of single natural tropocollagen molecules.

Collagen is a common structural protein, providing mechanical integrity for various vertebrate connective tissues such as cartilage and bone. The mechanical behaviours of these tissues under physical stimulations are controlled by the hierarchical structure of collagen and its interactions with other extracellular matrix molecules. However, the mechanical properties and deformation mechanisms of natural collagen under physiological loading rates at the molecular level are not fully understood. In this study, comprehensive steered molecular dynamics (SMD) simulations were performed on the 2nd intact overlap region (d2ol) and the 2nd intact D-period (d2olgp) of an in-situ characterized collagen molecule, under a large range of strain rates (6.5 × 106% s-1 to 1.3 × 1012% s-1). The results show that, depending on the applied strain rates, tropocollagen molecules unfold in different ways. Particularly, at high and intermediate strain rates, the number of inter-chain hydrogen bonds decreases rapidly even at small deformations, leading to a dramatic increase in the force. This results in an increase in the estimated Young's modulus of collagen triple helices as the deformation rate goes up, which, together with the nonlinear mechanical behaviour, explains the broad range of the Young's modulus for collagen model peptides reported in earlier SMD studies. Atomistic-level analyses indicate that the elastic modulus of single tropocollagen molecules decreases as the strain rate becomes smaller. However, for strain rates below 1.3 × 108% s-1, the tangent Young's modulus of d2ol (d2olgp) converges to approximately 3.2 GPa (3.4 GPa), at the strain of 10.5% (12%) when the segment is fully uncrimped. Furthermore, for strain rates under 1.3 × 108% s-1, d2ol and d2olgp show identical deformation mechanisms (unwinding, uncoiling and backbone stretching), but the corresponding strain ranges are different. This study will aid in future studies on characterizing the mechanical properties of collagen molecules and collagen-like peptides by indicating the proper pulling strain rates and how to determine the suitable strain range used for evaluating the elastic modulus.

Protein-restricted maternal diet during lactation decreases type I and type III tropocollagen synthesis in the skin of mice offspring.

We investigated the effects of a low protein (LP) maternal diet during lactation on type I and III tropocollagen synthesis in infant mouse skin. The LP diet decreased the levels of type I and III tropocollagen proteins and COL1A1 and COL3A1 mRNA. Thus, the protein composition of the maternal perinatal diet may influence the skin health of offspring.

High pressure Raman study of type-I collagen.

The high pressure response of type-I collagen from bovine Achilles tendon is investigated with micro-Raman spectroscopy. Fluorinert™ and methanol-ethanol mixtures were used as pressure transmitting media (PTM) in a diamond anvil cell. The Raman spectrum of collagen is dominated by three bands centred at approximately 1450, 1660 and 2930 cm-1 , attributed to C-H deformation, C=O stretching of the peptide bond (amide-I band) and C-H stretching modes respectively. Upon pressure increase, using Fluorinert™ as PTM, a shift towards higher frequencies of the C-H stretching and deformation peaks is observed. Contrary, the amide-I band peaks are shifted to lower frequencies with moderate pressure slopes. On the other hand, when using the alcohol mixture as PTM, the amide-I band exhibits more pronounced C=O bond softening, deduced from the shift to lower frequencies, suggesting a strengthening of the hydrogen bonds between glycine and proline residues of different collagen chains due to the presence of the polar alcohol molecules. Furthermore, some of the peaks exhibit abrupt changes in their pressure slopes at approximately 2 GPa, implying a variation in the compressibility of the collagen fibres. This could be attributed to a pitch change from 10/3 to 7/2, sliding of the tropocollagen molecules, twisting variation at the molecular level and/or elimination of the D-gaps induced by kink compression. All spectral changes are reversible upon pressure release, which indicates that denaturation has not taken place. Finally, a minor lipid phase contamination was detected in some sample spots. Its pressure response is also monitored.

The Role of Matrix Composition in the Mechanical Behavior of Bone.

PURPOSE OF REVIEW: While thinning of the cortices or trabeculae weakens bone, age-related changes in matrix composition also lower fracture resistance. This review summarizes how the organic matrix, mineral phase, and water compartments influence the mechanical behavior of bone, thereby identifying characteristics important to fracture risk. RECENT FINDINGS: In the synthesis of the organic matrix, tropocollagen experiences various post-translational modifications that facilitate a highly organized fibril of collagen I with a preferred orientation giving bone extensibility and several toughening mechanisms. Being a ceramic, mineral is brittle but increases the strength of bone as its content within the organic matrix increases. With time, hydroxyapatite-like crystals experience carbonate substitutions, the consequence of which remains to be understood. Water participates in hydrogen bonding with organic matrix and in electrostatic attractions with mineral phase, thereby providing stability to collagen-mineral interface and ductility to bone. Clinical tools sensitive to age- and disease-related changes in matrix composition that the affect mechanical behavior of bone could potentially improve fracture risk assessment.