ABSTRACT
Aim: The aim of the present study was to compare the clinical and radiographic success of amniotic membrane derivative (AMD), chitosan with mineral trioxide aggregate (C-MTA), diode laser (DL), and ferric sulfate (FS) as pulpotomy agents in human primary molars. Materials and methods: In this present study, pulpotomies were performed on 48 primary molars in 30 children aged between 4 and 8 years (12 teeth in each group). Following the pulpotomy procedure, teeth were evaluated clinically and radiographically at 1st, 3rd, 6th, and 9 monthly intervals. Results: After 9 months of follow-up, the clinical success was 91.6% for AMD and C-MTA and 83.3% for DL and FS. Radiographic success was 91.6, 91.6, 75, and 83.3% for AMD, C-MTA, DL, and FS groups, respectively. There is no statistically significant difference between the four groups (p > 0.05). Interpretation and conclusion: Results of our study showed that both AMD and C-MTA were equally successful compared to traditional agents like laser and ferric sulfate as pulpotomy agents. Clinical significance: Amniotic membrane derivative (AMD) and C-MTA are alternative biomimetic pulpotomy agents that can be used in pediatric primary tooth pulpotomies. How to cite this article: Lahoti VC, Lahoti P, Gundreddy LM, et al. Comparative Evaluation of Amniotic Membrane Derivative, Chitosan with Mineral Trioxide Aggregate, Diode Laser, and Ferric Sulfate as Pulpotomy Agents in Human Primary Molars: An In Vivo Study. Int J Clin Pediatr Dent 2024;17(2):153-157.
ABSTRACT
PURPOSE: This study systematically reviewed the clinical and radiographic outcomes of laser versus conventional pulpotomy in primary teeth. It also compared the success and effectiveness of different lasers to enhance the understanding and use of laser pulpotomy as an alternative treatment. METHODOLOGY: An electronic search was carried out in PubMed and Cochrane from 1st January 1999 to 31st December 2023. The published articles in the English language were searched using MeSH terms and text words. Only randomized controlled trials with a sample size of more than 10 and follow-ups over 6 months were included. Meta-analysis and forest plots were evaluated by utilizing Review Manager 5.4 software. Two reviewers assessed the risk of bias using the RoB 2 tool and discrepancies were resolved by the third reviewer. The success rates were combined using a random effects model to determine clinical and radiographic outcomes. We used risk ratios with 95% confidence intervals (CI) as the primary effect measures and set the significance level at 0.05. RESULTS: Only 18 studies met the inclusion criteria after an electronic search. Among them, 13 studies evaluated the clinical and radiographic outcomes of laser with formocresol pulpotomy, 2 studies compared with ferric sulfate pulpotomy, and the remaining studies with Mineral trioxide aggregate (MTA) pulpotomy. The various studies showed different levels of bias. There was no significant difference in the clinical success rate (p = 0.47; RR: 1.01; 95% CI 0.98-1.04; I2 = 0%; p = 0.70) and radiographic success rate (p = 0.94; RR: 1.00; 95% CI 0.91-1.09; I2 = 64%; p = 0.001) between laser pulpotomy and formocresol. Similarly, there was no significant difference between laser pulpotomy and ferric sulfate or MTA pulpotomy. CONCLUSION: Diode laser and LLLT can be considered as alternative pulpotomy agents to formocresol in primary teeth. However, high-quality trials are needed to confirm the accuracy and reliability of these findings.
Subject(s)
Laser Therapy , Pulpotomy , Tooth, Deciduous , Humans , Pulpotomy/methods , Laser Therapy/methods , Treatment Outcome , Formocresols/therapeutic use , Ferric Compounds/therapeutic use , Aluminum Compounds/therapeutic use , Randomized Controlled Trials as Topic , Calcium Compounds/therapeutic use , Oxides/therapeutic use , Silicates/therapeutic use , Drug CombinationsABSTRACT
A synthetic flocculant of aluminum (Al) and iron (Fe) extracted from red mud (RM) has been widely used in sewage treatment, while the remaining RM residue has been ignored. This study aimed to synthesize polymeric aluminum ferric sulfate (PAFS) flocculant from RM by acid leaching and then use the acidified RM residue to produce an acid RM-based ceramsite (ARMC) by mixing bentonite, hydroxypropyl methylcellulose, and starch. Our results showed that sintering, reaction temperature, H2SO4 concentration, reaction time, and liquid-to-solid ratio had an obvious effect on the leaching of Al and Fe in RM, which was a necessary prerequisite for the efficient PAFS flocculants. At a PAFS dosage of 60 mg/L, turbidity and phosphate removal rates were 95.21 ± 0.64% and 89.17 ± 0.52%, respectively. When the pH value was 8.0, the turbidity and phosphate removal efficiency were 99.22 ± 0.66% and 95.98 ± 1.63%, respectively. Considering the adsorption capacity and mechanical properties, the best conditions for ARMC production included using 60% ARM and ceramsite calcination at 600 °C, with the BET surface area 56.16 m2/g and a pore volume of 0.167 cm3/g. Thermogravimetric analysis indicated that 400 °C was a reasonable preheating temperature to enhance the ARMC mechanical strength, as this temperature allows the removal of surface-adsorbed and constituent water. Under a scanning electron microscope, the ARMC appeared rough before adsorption, while relatively uniform pores occupied it after adsorption. Our conclusion will help to improve the zero-waste strategy of RM and speed up the industrial production of RM in flocculants as well as utilizing ARMC as a new type of adsorbent for phosphorus adsorption in sewage treatment.
ABSTRACT
Inorganic coagulants (aluminum and iron salt) are widely used to improve sludge dewaterability, resulting in numerous residues in dewatered sludge. Composting refers to the controlled microbial process that converts organic wastes into fertilizer, and coagulant residues in dewatered sludge can affect subsequent compost efficiency and resource recycling, which remains unclear. This work investigated the effects of two typical metal salt coagulants (poly aluminum chloride [PAC] and poly ferric sulfate [PFS]) conditioning on sludge compost. Our results revealed that PAC conditioning inhibited composting with decreased peak temperature, microbial richness, enzymatic reaction intensities, and compost quality, associated with decreased pH and microbial toxicity of aluminum. Nevertheless, PFS conditioning selectively enriched Pseudoxanthomonas sp. and resulted in more fertile compost with increased peak temperature, enzymatic reaction intensities, and humification degree. Spectroscopy and mass difference analyses indicated that PFS conditioning enhanced reaction intensities of labile biopolymers at the thermophilic stage, mainly comprising hydrolyzation (H2O), dehydrogenation (-H2, -H4), oxidation (+O1H2), and other reactions (i.e., +CH2, C2H4O1, C2H6O1). Unlike the common composting process primarily conducts humification at the cooling stage, PFS conditioning changed the main occurrence stage to the thermophilic stage. Non-targeted metabolomics revealed that indole (a humification intermediate) is responsible for the increased humification degree and indoleacetic acid content in the PFS-conditioned compost, which then promoted compost quality. Plant growth experiments further confirmed that the dissolved organic matter (DOM) in PFS-conditioned compost produced the maximum plant biomass. This study provided molecular-level evidence that PFS conditioning can promote humification and compost fertility during sludge composting, enabling chemical conditioning optimization for sustainable management of sludge.
ABSTRACT
In this study, the tetracycline (TC) removal performance of iron-loaded biochar (BPFSB) derived from sugarcane bagasse and polymerized iron sulfate was investigated, and the mechanism of TC removal was also explored by study of isotherms, kinetics and thermodynamics and characterization of fresh and used BPFSB (XRD, FTIR, SEM and XPS). The results showed that under optimized conditions (initial pH 2; BPFSB dosage 0.8 g·L-1; TC initial concentration 100 mg·L-1; Contact time 24 h; temperature 298 K), the removal efficiency of TC was as high as 99.03%. The isothermal removal of TC followed well the Langmuir, Freundlich, and Temkin models, indicating that multilayer surface chemisorption dominated the TC removal. The maximum removal capacity of TC by BPFSB at different temperatures was 185.5 mg·g-1 (298 K), 192.7 mg·g-1 (308 K), and 230.9 mg·g-1 (318 K), respectively. The pseudo-second-kinetic model described the TC removal better, while its rate-controlling step was a combination of liquid film diffusion, intraparticle diffusion, and chemical reaction. Meanwhile, TC removal was also a spontaneous and endothermic process, during which the randomness and disorder between the solid-liquid interface was increased. According to the characterization of BPFSBs before and after TC removal, H-bonding and complexation were the major interactions for TC surface adsorption. Furthermore, BPFSB was efficiently regenerated by NaOH. In summary, BPFSB had the potential for practical application in TC removal.
Subject(s)
Saccharum , Water Pollutants, Chemical , Iron , Cellulose , Tetracycline/chemistry , Anti-Bacterial Agents/chemistry , Charcoal/chemistry , Polymers , Adsorption , Water Pollutants, Chemical/analysis , Kinetics , Hydrogen-Ion ConcentrationABSTRACT
The scarcity of carbon sources presents a significant challenge for the bio-treatment of rural domestic wastewater (RDW). This paper presented an innovative approach to address this issue by investigating the supplementary carbon source through in-situ degradation of particulate organic matter (POM) facilitated by ferric sulfate modified sludge-based biochar (SBC). To prepare SBC, five different contents of ferric sulfate (0%, 10%, 20%, 25%, and 33.3%) were added to sewage sludge. The results revealed that the pore and surface of SBC were enhanced, providing active sites and functional groups to accelerate the biodegradation of protein and polysaccharide. During the 8-day hydrolysis period, the concentration of soluble chemical oxidation demand (SCOD) increased and peaked (1087-1156 mg L-1) on the fourth day. The C/N ratio increased from 3.50 (control) to 5.39 (25% ferric sulfate). POM was degraded the five dominant phyla, which were Actinobacteriota, Firmicutes, Synergistota, Proteobacteria, and Bacteroidetes. Although the relative abundance of dominant phyla changed, the metabolic pathway remained unchanged. The leachate of SBC (<20% ferric sulfate) was beneficial for microbes, but an excessive amount of ferric sulfate (33.3% ferric sulfate) could have inhibition effects on bacteria. In conclusion, ferric sulfate modified SBC holds the potential for the carbon degradation of POM in RDW, and further improvements should be made in future studies.
Subject(s)
Sewage , Wastewater , Sewage/microbiology , Carbon , BacteriaABSTRACT
Antibiotic fermentation residue flocculated by polymeric ferric sulfate (PFS) has been classified as a "hazardous waste" in China. In this study, it was recycled into antibiotic fermentation residue biochar (AFRB) by pyrolysis and used as a heterogeneous electro-Fenton (EF) catalyst for ciprofloxacin (CIP) degradation. The results show that PFS was reduced to Fe0 and FeS during pyrolysis, which was beneficial for the EF process. The AFRB with mesoporous structures exhibited soft magnetic features, which were convenient for separation. CIP was completely degraded within 10 min by the AFRB-EF process at an initial concentration of 20 mg/L. Increasing the working current and catalyst dosage within a certain range could improve the degradation rate. ·OH and O2·- were the dominant reactive oxygen species that played critical roles for CIP degradation. The antibacterial groups of CIP have been destroyed by the heterogeneous electro-Fenton process and its toxicity was negligible. The AFRB showed satisfactory performance, even though it was recycled five times. This study provide new insights into the resourceful treatment of antibiotic fermentation residues.
Subject(s)
Ciprofloxacin , Water Pollutants, Chemical , Ciprofloxacin/chemistry , Fermentation , Water Pollutants, Chemical/analysis , Hydrogen Peroxide/chemistry , Anti-Bacterial Agents/chemistry , Oxidation-ReductionABSTRACT
The adsorption mechanisms for model hydrocarbons, 4-nitrophenol (PNP), and naphthalene were studied in a coagulation-based process using a ferric sulfate-lime softening system. Kinetic and thermodynamic adsorption parameters for this system were obtained under variable ionic strength and temperature. An in situ method was used to investigate kinetic adsorption profiles for PNP and naphthalene, where a pseudo-first order kinetic model adequately described the process. Thermodynamic parameters for the coagulation of PNP and naphthalene reveal an endothermic and spontaneous process. River water was compared against lab water samples at optimized conditions, where the results reveal that ions in the river water decrease the removal efficiency (RE; %) for PNP (RE = 28 to 20.3%) and naphthalene (RE = 89.0 to 80.2%). An aluminum sulfate (alum) coagulant was compared against the ferric system. The removal of PNP with alum decreased from RE = 20.5% in lab water and to RE = 16.8% in river water. Naphthalene removal decreased from RE = 89.0% with ferric sulfate to RE = 83.2% with alum in lab water and from RE = 80.2% for the ferric system to RE = 75.1% for alum in river water. Optical microscopy and dynamic light scattering of isolated flocs corroborated the role of ions in river water, according to variable RE and floc size distribution.
ABSTRACT
The excessive proliferation of cyanobacteria in surface waters is a widespread problem worldwide, leading to the contamination of drinking water sources. Short- and long-term solutions for managing cyanobacterial blooms are needed for drinking water supplies. The goal of this research was to investigate the cyanobacteria community composition using shotgun metagenomics in a short term, in situ mesocosm experiment of two lakes following their coagulation with ferric sulfate (Fe2(SO4)3) as an option for source water treatment. Among the nutrient paramenters, dissolved nitrogen was related to Microcystis in both Missisquoi Bay and Petit Lac St. François, while the presence of Synechococcus was related to total nitrogen, dissolved nitrogen, dissolved organic carbon, and dissolved phosphorus. Results from the shotgun metagenomic sequencing showed that Dolichospermum and Microcystis were the dominant genera in all of the mesocosms in the beginning of the sampling period in Missisquoi Bay and Petit Lac St. François, respectively. Potentially toxigenic genera such as Microcystis were correlated with intracellular microcystin concentrations. A principal component analysis showed that there was a change of the cyanobacterial composition at the genus level in the mesocosms after two days, which varied across the studied sites and sampling time. The cyanobacterial community richness and diversity did not change significantly after its coagulation by Fe2(SO4)3 in all of the mesocosms at either site. The use of Fe2(SO4)3 for an onsite source water treatment should consider its impact on cyanobacterial community structure and the reduction of toxin concentrations.
Subject(s)
Cyanobacteria , Drinking Water , Microcystis , Microcystins/analysis , Drinking Water/analysis , Cyanobacteria/genetics , Microcystis/genetics , Lakes/microbiology , Nitrogen/analysis , Phosphorus/analysisABSTRACT
OBJECTIVE: To evaluate the effects of zinc oxide-eugenol, calcium hydroxide, and mineral trioxide aggregate as base materials on the clinical and radiographic success of ferric sulfate pulpotomies in primary molars. METHOD AND MATERIALS: Following hemostasis with 15.5% ferric sulfate, 105 teeth were randomly allocated to three groups: Group 1, zinc oxide-eugenol; Group 2, calcium hydroxide; and Group 3, mineral trioxide aggregate. All teeth were restored with stainless-steel crowns. Clinical and radiographic examinations were conducted at 6, 12, 18, and 24 months. RESULTS: After 24 months, clinical success rates for Groups 1 to 3 were 97.1% (34/35 teeth), 94.2% (33/35 teeth), and 97.1% (34/35 teeth), respectively (P > .05). Radiographic success rates were 65.7% (23/35 teeth), 65.7% (23/35 teeth), and 77.1% (27/35 teeth), respectively (P > .05). Internal resorption was the most observed radiographic finding (15/105 teeth). CONCLUSIONS: The choice of zinc oxide-eugenol, calcium hydroxide, and mineral trioxide aggregate, as base materials, did not affect the clinical and radiographic success of ferric sulfate pulpotomies in primary teeth.
Subject(s)
Pulpotomy , Zinc Oxide , Calcium Compounds/therapeutic use , Calcium Hydroxide/pharmacology , Calcium Hydroxide/therapeutic use , Drug Combinations , Eugenol/pharmacology , Ferric Compounds , Humans , Molar/surgery , Oxides/therapeutic use , Pulpotomy/methods , Silicates/therapeutic use , Steel/pharmacology , Tooth, Deciduous , Treatment Outcome , Zinc Oxide/pharmacology , Zinc Oxide-Eugenol Cement/pharmacology , Zinc Oxide-Eugenol Cement/therapeutic useABSTRACT
Poly aluminum chloride (PAC) and poly ferric sulfate (PFS) are widely used in wastewater treatment and sludge dewatering, resulting in their amounts being accumulated substantially in waste activated sludge (WAS). Till now, however, little information about their influence on WAS digestion is available. This work therefore aims to provide insights into how PAC and PFS affect sludge anaerobic digestion. The experimental results showed that PFS's inhibition to methane production was much severer than PAC, in control reactor (0 mg Al or Fe /g TSS), the maximum cumulative methane production was 152.99 ± 7.18 mL/g VSS, when flocculants concentration increased to 30 mg Al/g TSS or 30 mg Fe/g TSS, the yields decreased to 129.54 ± 6.18 mL/g VSS and 89.52 ± 4.82 mL/g VSS respectively. Mechanism explorations exhibited that protein in WAS could bond with flocculants, which would inhibit protein bioconversion. It was also observed that the apparent activation energy (AAE) of organic solubilisation of PAC and PFS-contained sludge were increased by 38.58% and 18.67% respectively. Meanwhile, compared to the PFS, PAC led to more serious suppression of hydrolysis and acidogenesis processes, with propionic acid used as substrate, PFS inhibit methanogenesis more severely than PAC. Illumina MiSeq sequencing analyses showed that the number of sulfate-reducing bacteria (SRB) enriched obviously in PFS reactor. The results revealed that although PFS reduced methane production more severely than PAC, the reduction was mainly enforced by the activity of SRB but not organic enmeshment. Furthermore, PAC severely suppresses acetotrophic methanogens but PFS depress hydrogenotrophic methanogenesis microorganism mainly. Additionally, malodor control and dewaterability enhancement of digested sludge can be realized with PAC existence. The finding obtained in this study would provide insights into the PFS or PAC-involved sludge anaerobic digestion system and might support the important implication for further manipulate WAS treatment in the future.
Subject(s)
Bioreactors , Sewage , Aluminum Chloride , Anaerobiosis , Ferric Compounds , Methane , Waste Disposal, FluidABSTRACT
ABSTRACT: The harvesting process is a current challenge for the commercial production of microalgae because the biomass is diluted in the culture medium. Several methods have been proposed to harvest microalgae cells, but there is not a consensus about the optimum method for such application. Herein, the methods based on sedimentation, flocculation, and centrifugation were evaluated on the recovery of Chlorella sorokiniana BR001 cultivated in a low-nitrogen medium. C. sorokiniana BR001 was cultivated using a low-nitrogen medium to trigger the accumulation of neutral lipids and neutral carbohydrates. The biomass of C. sorokiniana BR001 cultivated in a low-nitrogen medium showed a total lipid content of 1.9 times higher (23.8 ± 4.5%) when compared to the biomass produced in a high-nitrogen medium (12.3 ± 1.2%). In addition, the biomass of the BR001 strain cultivated in a low-nitrogen medium showed a high content of neutral carbohydrates (52.1 ± 1.5%). The natural sedimentation-based process was evaluated using a sedimentation column, and it was concluded that C. sorokiniana BR001 is a non-flocculent strain. Therefore, it was evaluated the effect of different concentrations of ferric sulfate (0.005 to 1 g L-1) or aluminum sulfate (0.025 to 0.83 g L-1) on the flocculation process of C. sorokiniana BR001, but high doses of flocculant agents were required for an efficient harvest of biomass. It was evaluated the centrifugation at low speed (300 to 3,000 g) as well, and it was possible to conclude that this process was the most adequate to harvest the non-flocculent strain C. sorokiniana BR001.
RESUMO: O processo de colheita é um desafio atual para a produção comercial de microalgas porque a biomassa é diluída no meio de cultivo. Diversos métodos têm sido propostos para coletar células de microalgas, porém não existe um consenso sobre um método ótimo para tal aplicação. Neste estudo, métodos baseados em sedimentação, floculação e centrifugação foram avaliados na recuperação de Chlorella sorokiniana BR001 cultivada em um meio com baixo teor de nitrogênio. C. sorokiniana BR001 foi cultivada em um meio com baixo teor de nitrogênio para induzir ao acúmulo de lipídeos e carboidratos neutros. A biomassa de C. sorokiniana BR001 cultivada em um meio com baixo teor de nitrogênio apresentou um teor de lipídeos 1,9 vezes superior (23,8 ± 4,5%), quando comparada à biomassa produzida em um meio com alto teor de nitrogênio (12,3 ± 1,2%). Adicionalmente, a biomassa da linhagem BR001 cultivada em um meio com baixo teor de nitrogênio apresentou alto teor de carboidratos neutros (52,1 ± 1,5%). O processo baseado em sedimentação natural foi avaliado utilizando uma coluna de sedimentação e concluiu-se que C. sorokiniana BR001 é uma linhagem não floculante. Portanto, o efeito de diferentes concentrações de sulfato férrico (0,005 a 1 g L-1) ou sulfato de alumínio (0,025 a 0,83 g L-1) foram avaliados no processo de floculação de C. sorokiniana BR001, mas altas doses de floculantes foram necessárias para uma colheita de biomassa eficiente. Também foi avaliada a centrifugação em baixa velocidade (300 a 3.000 g), e foi possível concluir que este processo constituiu o mais adequado para a colheita da linhagem não floculante C. sorokiniana BR001.
ABSTRACT
Cyanobacterial blooms are a global concern. Chemical coagulants are used in water treatment to remove contaminants from the water column and could potentially be used in lakes and reservoirs. The aims of this study was to: 1) assess the efficiency of ferric sulfate (Fe2(SO4)3) coagulant in removing harmful cyanobacterial cells from lake water with cyanobacterial blooms on a short time scale, 2) determine whether some species of cyanobacteria can be selectively removed, and 3) determine the differential impact of coagulants on intra- and extra-cellular toxins. Our main results are: (i) more than 96% and 51% of total cyanobacterial cells were removed in mesocosms with applied doses of 35 mgFe/L and 20 mgFe/L, respectively. Significant differences in removing total cyanobacterial cells and several dominant cyanobacteria species were observed between the two applied doses; (ii) twelve microcystins, anatotoxin-a (ANA-a), cylindrospermopsin (CYN), anabaenopeptin A (APA) and anabaenopeptin B (APB) were identified. Ferric sulfate effectively removed the total intracellular microcystins (greater than 97% for both applied doses). Significant removal of extracellular toxins was not observed after coagulation with both doses. Indeed, the occasional increase in extracellular toxin concentration may be related to cells lysis during the coagulation process. No significant differential impact of dosages on intra- and extra-cellular toxin removal was observed which could be relevant to source water applications where optimal dosing is difficult to achieve.
Subject(s)
Anti-Bacterial Agents/pharmacology , Cyanobacteria Toxins/chemistry , Cyanobacteria/drug effects , Ferric Compounds/pharmacology , Lakes/microbiology , Cyanobacteria/chemistryABSTRACT
Microalgae are known as renewable, potential, and sustainable feedstocks for biofuel production. The present work investigated the efficient valorization of green microalgae Chlorella sp. to produce sugars and 5-hydroxymethylfurfural (5-HMF) using thermochemical conversion with a metal-salt (ferric sulfate) as catalyst using a statistical approach and two-step conversion. A statistical approach with a Box-Behnken design was introduced to optimize the conversion for producing sugars. As a result of optimization, 86.46% sugar yield (68.32% glucose yield) was achieved under the condition of 5% biomass and 0.6 g-catalyst/g-biomass at 155 °C and 40 min. Two-step thermochemical conversion was introduced to produce 5-HMF from microalgae. In the first step, sugars were produced from the above optimum condition; in the second step, sugar hydrolysates were converted into 5-HMF by thermochemical conversion without an additional catalyst. In two-step conversion, the maximum 5-HMF yield (37.23%) was achieved at 170 °C and 60 min from the sugar hydrolysate of microalgae obtained from the first-step thermochemical conversion with ferric sulfate. In conclusion, the microalgae as biomass and ferric sulfate as catalyst have availability and the potential to produce biosugars and platform chemicals.
Subject(s)
Chlorella , Microalgae , Biomass , Ferric Compounds , Furaldehyde/analogs & derivativesABSTRACT
OBJECTIVE: To determine the clinical and radiographic success of Biodentine® (BD) and Ferric Sulfate (FS) as primary molar pulpotomy materials and to compare their outcomes. STUDY DESIGN: Retrospective data was obtained from the electronic health records (EHR) of a university-based pediatric dental clinic. Participants were enrolled according to specified inclusion and exclusion criteria. Two trained and calibrated examiners evaluated the EHR using validated criteria for clinical and radiographic outcomes. Study data was numerically coded and analyzed. Cohen's Kappa and Chi-square tests were used (p<0.05). RESULTS: Eighty-three participants (62.7% females, age range two to eight years, average age of 4.5 years) with 102 pulpotomies were enrolled. FS was used in 78% (n=79) and BD in 22% (n=23) of the cases. Follow-up periods ranged from six to 36 months (mean of 17 months). BD showed 100% clinical and radiographic success, while FS demonstrated 84% clinical and 70% radiographic success. The two groups were compared at one year with no statistically significant differences. At 18 months, BD outperformed FS clinically (p=.012) and radiographically (p=.001). Intra-rater and inter-rater agreement were κ>0.88. CONCLUSIONS: Both materials can be recommended for clinical practice, however BD may be the preferred choice for its better outcomes at 18 months.
Subject(s)
Calcium Compounds , Pulpotomy , Child , Child, Preschool , Drug Combinations , Female , Ferric Compounds/therapeutic use , Humans , Male , Molar/diagnostic imaging , Molar/surgery , Retrospective Studies , Silicates/therapeutic use , Tooth, Deciduous , Treatment OutcomeABSTRACT
Objective @#To explore the effects of two hemostatic agents on the bonding strength of different bonding systems in primary tooth dentin.@*Methods @# Seventy-two retained deciduous teeth were randomly selected. Forty-eight teeth were used to construct the microleakage model, the other 24 teeth were cut along the mesial and distal directions and 48 samples were obtained to construct the shear bond strength model. The two experiments were divided into 2 groups. Group A was the total-etch group: A1 (ViscoStat + Spectrum Bond NT); A2 (ViscoStat Clear + Spectrum Bond NT); and A3 (Non + Spectrum Bond NT); Group B was the self-etch group: B1 (ViscoStat + Single bond Universal Adhesive); B2 (ViscoStat Clear + Single bond Universal Adhesive); and B3 (Non + Single bond Universal Adhesive). Microleakage experiments and shear bond strength experiments were carried out respectively and the morphology of the fracture surface was observed by scanning electron microscopy.@* Results @#There was no significant difference in microleakage among groups A1, A2, and A3 (P > 0.05). There was no significant difference in microleakage among groups B1, B2, and B3 (P > 0.05). There was no significant difference in the shear bond strength among groups A1, A2 and A3 (P > 0.05). The shear bond strength of groups B1 and B2 was significantly lower than that of group B3 (P < 0.05). There was no significant difference between groups B1 and B2 (P > 0.05). @*Conclusion@#ViscoStat and ViscoStat Clear had no effect on the marginal integrity of deciduous tooth dentin under the different bonding systems. The two hemostatic agents reduced the shear bonding strength of deciduous tooth dentin under the self-etch adhesive system, but had no effect on the shear bonding strength of deciduous tooth dentin under the total-etch adhesive system.
ABSTRACT
Poly ferric sulfate (PFS), one of the typical inorganic flocculants widely used in wastewater management and waste activated sludge (WAS) dewatering, could be accumulated in WAS and inevitably entered in anaerobic digestion system at high levels. However, knowledge about its impact on methane production is virtually absent. This study therefore aims to fill this gap and provide insights into the mechanisms involved through both batch and long-term tests using either real WAS or synthetic wastewaters as the digestion substrates. Experimental results showed that the maximum methane potential and production rate of WAS was respectively retarded by 39.0% and 66.4%, whereas the lag phase was extended by 237.0% at PFS of 40 g per kg of total solids. Mechanism explorations exhibited that PFS induced the physical enmeshment and disrupted the enzyme activity involved in anaerobic digestion, resulting in an inhibitory state of the bioprocess of hydrolysis, acidogenesis, and methanogenesis. Furthermore, PFS's inhibition to hydrogenotrophic methanogenesis was much severer than that to acetotrophic methanogenesis, which could be supported by the elevated abundances of Methanosaeta sp and the dropped abundances of Methanobacterium sp in PFS-present digester, and probably due to the severe mass transfer resistance of hydrogen between the syntrophic bacteria and methanogens, as well as the higher hydrogen appetency of PFS-induced sulfate reducing bacteria. Among the derivatives of PFS, "multinucleate and multichain-hydroxyl polymers" and sulfate were unveiled to be the major contributors to the decreased methane potential, while the "multinucleate and multichain-hydroxyl polymers" were identified to be the chief buster to the slowed methane-producing rate and the extended lag time.
Subject(s)
Bioreactors , Sewage , Anaerobiosis , Ferric Compounds , MethaneABSTRACT
AIM: This 3-year retrospective case series evaluated the clinical and radiographic outcome of ferric sulfate and formocresol pulpotomy in primary molar teeth in a dental teaching hospital in Malaysia. MATERIALS AND METHODS: Clinical and radiographic records of all pediatric patients who had pulpotomy of primary molar teeth between July 2005 and October 2008 were evaluated. A total of 55 pulpotomized primary molars were observed. Clinical assessments were carried out during the second visit to assess the presence of sinus tract, gingival swelling, excessive tooth mobility, tenderness to percussion, and abnormal exfoliation of the treated teeth. Periapical radiographs were reviewed for evidence of pathologic root resorption, radicular and/or periapical radiolucency, and abnormal pulp canal calcification. Treatments were regarded as failure in the presence of one or more of the above clinical and/or radiographic signs and symptoms. RESULTS: Of 55 pulpotomized teeth, 26 (47.3%) remained free from any clinical signs and symptoms and 48 (87.3%) showed no pathological radiographic findings. The clinical success rates of ferric sulfate and formocresol pulpotomy were 44.4% and 60.0%, respectively, whereas the radiographic success rates of ferric sulfate and formocresol pulpotomy were 86.7% and 90.0%, respectively. Although teeth treated with formocresol had higher both clinical and radiographic success rates compared with those treated with ferric sulfate, it was not statistically significant. CONCLUSION: The clinical success rates of pulpotomy were lower compared with radiographic success rates. Ferric sulfate is an alternative to formocresol; however, the use of both agents in the dental undergraduate teaching at Universiti Sains Malaysia can still be recommended. CLINICAL SIGNIFICANCE: Formocresol and ferric sulfate are advocated as pulpotomy agents in primary molar teeth since both agents showed comparable clinical and radiographic success rates. HOW TO CITE THIS ARTICLE: Sanusi SY, Jamaludin SA, Al-Batayneh OB, et al. Fate of Pulpotomized Teeth in Pediatric Patients: A 3-year Case Series in a Malaysian Dental Teaching Hospital. Int J Clin Pediatr Dent 2020;13(1):79-84.
ABSTRACT
In spent lithium iron phosphate batteries, lithium has a considerable recovery value but its content is quite low, thus a low-cost and efficient recycling process has become a challenging research topic. In this paper, two methods about using the non-oxidizing inorganic iron salt - Fe2(SO4)3 to recover lithium from LiFePO4 are proposed. The method-1 is theoretical-molar Fe2(SO4)3 (Fe2(SO4)3 : LiFePO4 =1:2) dosage is added and more than 97% of lithium can be leached in just 30 min even under a pretty high solid-liquid ratio of 500 g/L. Spectrophotometry provides the evidence of Fe2+/Fe3+ substitution in the leaching process. In the method-2, the generated Fe2+ originating from LiFePO4 is fully utilized with the addition of H2O2, and the dosage of Fe2(SO4)3 is decreased by two thirds (Fe2(SO4)3 : LiFePO4 =1:6). Several sulphates (CuSO4, NiSO4, MgSO4) are employed to explore the leaching mechanism. All the results reveal that the reaction of Fe3+ substituting Fe2+ has a powerful driving force. In addition, these two leaching processes simultaneously present superior selectivity for the impurities. The Fe2(SO4)3 in two methods does not cause pollution and is easily regenerated by adding H2SO4. The proposed rapid, efficient and selective leaching thought would be a competitive candidate for recycling spent LiFePO4 batteries.
ABSTRACT
Jambolan (Syzigium cumini (L.) Skeels) stands out among the Brazilian fruits that are rich in bioactive compounds with potential for the production of dehydrated product. Therefore, jambolan juice powder was produced by foam mat drying method and stored for 150â¯days at three temperatures (4, 25, 35⯰C). The effect of time, temperature and the interaction of these two factors on the qualitative and quantitative profile of phenolic compounds were determined after analysis of the powders by using HPLC-DAD-ESI-MSn. For the powders submitted to the different study condition, the concentration of flavonols did not differ from the control sample, and only a small reduction in the anthocyanins concentrations was seen (7-9%), only being significantly affected by storage time. Additionally, the molar profiles of these compounds were influenced more by time than storage temperature, however none of the compounds identified was totally degraded. The percentages of antioxidant activity oscillated during the storage time, however, without major losses after 150â¯days at all storage temperatures. The results showed that jambolan juice powder is very stable in terms of anthocyanins and flavonols concentrations at all three temperatures of the storage. This and the attractive color (purplish-red) make it a potential ingredient to enrich differentiated foods.