Chest tube management following two row vertebral body tethering for adolescent idiopathic scoliosis.

BACKGROUND: The current gold standard of scoliosis correction procedures is still posterior spinal fusion, an extensively studied procedure. anterior vertebral body tethering is a newer surgical technique for the correction of scoliotic curves. Consequently, best practices have yet to be determined. METHODS: A single-institution, retrospective, review of all patients diagnosed with adolescent idiopathic scoliosis who underwent two row anterior vertebral body tethering between June 2020 and April 2022 was performed. RESULTS: Over the study period, 95 patients met inclusion: 79 females (83.2%) and 16 males (16.8%), age 14.4 ± 2.5 years, with a body mass index of 20.0 ± 2.9, and an average of 8.4 ± 2.1 levels treated. 28 (29.5%) procedures were for double curves and 67 (70.5%) for single curves. After tethering, a chest tube was positioned in each corrected side. A total of 123 chest tubes were analyzed, including 67 single curves and 28 double curves. Average chest tube duration was 2.5 ± 1.1 days and average length of stay was 5.0 ± 2.0 days. Average chest tube output eight hours prior to removal was 61.1 ± 45.6 mL. There was no significant difference in average length of stay for patients who underwent correction of a single curve versus a double curve nor was there a difference in average length of stay or chest tube duration for revisions compared to primary procedures. For the entire cohort, 30-day emergency department visit rate was 7.4% (n = 7) and readmission rate was 4.2% (n = 4). CONCLUSIONS: This early review of a 2-year two row vertebral body tethering postoperative experience provides a report of a safe and effective approach to chest tube management at a single academic center.

Construct length analysis of type B and C cervical and thoracolumbar fractures.

Objectives: The purpose of this study is to identify if construct length affects the rate of surgical complications and instrumentation revision following surgical fixation of subaxial and thoracolumbar Type B and C fractures. This study evaluates the effect of ankylosing spondylitis/diffuse idiopathic skeletal hyperostosis (AS/DISH) within this population on outcomes. Methods: Retrospective review of 91 cervical and 89 thoracolumbar Type B and C fractures. Groups were divided by construct length for analysis: short-segment (constructs spanning two or less segments adjacent to the fracture) and long-segment (constructs spanning more than two segments adjacent to the vertebral fracture). Results: For cervical fractures, construct length did not impact surgical complications (P = 0.641), surgical hardware revision (P = 0.167), or kyphotic change (P = 0.994). For thoracolumbar fractures, construct length did not impact surgical complications (P = 0.508), surgical hardware revision (P = 0.224), and kyphotic change (P = 0.278). Cervical Type B fractures were nonsignificantly more likely to have worsened kyphosis (P = 0.058) than Type C fractures. Assessing all regions of the spine, a diagnosis of AS/DISH was associated with an increase in kyphosis (P = 0.030) and a diagnosis of osteoporosis was associated with surgical hardware failure (P = 0.006). Conclusion: Patients with short-segment instrumentation have similar surgical outcomes and changes in kyphosis compared to those with long-segment instrumentation. A diagnosis of AS/DISH or osteoporosis was associated with worse surgical outcomes.

Are the facet joint parameters risk factors for cage subsidence after TLIF in patients with lumbar degenerative spondylolisthesis?

PURPOSE: To assess whether preoperative facet joint parameters in patients with degenerative lumbar spondylolisthesis (DS) are risk factors for cage subsidence (CS) following transforaminal lumbar interbody fusion (TLIF). METHODS: We enrolled 112 patients with L4-5 DS who underwent TLIF and were followed up for > 1 year. Preoperative demographic characteristics, functional areas of paraspinal muscles and psoas major muscles (PS), total functional area relative to vertebral body area, functional cross-sectional area (FCSA) of PS and lumbar spine extensor muscles, normalized FCSA of PS to the vertebral body area (FCSA/VBA), lumbar indentation value, facet joint orientation, facet joint tropism (FT), cross-sectional area of the superior articular process (SAPA), intervertebral height index, vertebral Hounsfield unit (HU) value, lordosis distribution index, t-scores, sagittal plane parameters, visual analog scale (VAS) for low back pain, VAS for leg pain, Oswestry disability index, global alignment and proportion score and European quality of life-5 dimensions (EQ-5D) were assessed. RESULTS: Postoperative CS showed significant correlations with preoperative FO(L3-4), FT (L3 and L5), SAPA(L3-5), L5-HU, FCSA/VBA(L3-4), Pre- T-score, post-6-month VAS for back pain and EQ-5D scores among other factors. According to ROC curve analysis, the optimal decision points for FO(L3-4), L3-SAPA, FCSA/VBA(L3-4), L5-HU, and Pre- T-score were 35.88°, 43.76°,114.93, 1.73, 1.55, 136, and - 2.49. CONCLUSIONS: This study identified preoperative FO, SAPA, preoperative CT, Pre- T-score and the FCSA/VBA as independent risk factors for CS after TLIF for DS. These risk factors should enable spinal surgeons to closely monitor and prevent the occurrence of CS.

Mechanical Vertebral Body Augmentation Versus Conventional Balloon Kyphoplasty for Osteoporotic Thoracolumbar Compression Fractures: A Systematic Review and Meta-Analysis of Outcomes.

STUDY DESIGN: Systematic review and meta-analysis. OBJECTIVE: Surgical management of osteoporotic vertebral compression fractures (OVCFs) has traditionally consisted of vertebroplasty or kyphoplasty procedures. Mechanical percutaneous vertebral body augmentation (MPVA) systems have recently been introduced as alternatives to traditional methods. However, the effectiveness of MPVA systems vs conventional augmentation techniques for OVCFs remains unclear. This serves as the premise for this study. METHODS: A systematic review and meta-analysis was conducted as per the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Studies of interest included randomized controlled trials (RCTs) which directly compared patient outcomes following kyphoplasty to patients treated with MPVA systems. Clinical and radiological findings were collated and compared for significance between cohorts. RESULTS: 6 RCTs were identified with 1024 patients total. The mean age of all patients was 73.5 years. 17% of the cohort were male, 83% were female. 515 patients underwent kyphoplasty and 509 underwent mechanical vertebral body augmentation using MPVA systems. MPVAs showed similar efficacy for restoration of vertebral body height (P = .18), total complications (P = .36), cement extravasation (P = .58) and device-related complications (P = .06). MPVAs also showed reduced rates of all new fractures (16.4% vs 22.2%; P = .17) and adjacent fractures (14.7% vs 18.9%; P = .23), with improved visual analogue scale (VAS) scores at 6-month (P = .13). CONCLUSION: The results of this meta-analysis highlight no significant improvement in clinical or radiological outcomes for MPVA systems when compared to balloon kyphoplasty for vertebral body augmentation. Further research is needed to establish a true benefit over traditional operative methods.

Growth modulation response in vertebral body tethering depends primarily on magnitude of concave vertebral body growth.

PURPOSE: There is variability in clinical outcomes with vertebral body tethering (VBT) partly due to a limited understanding of the growth modulation (GM) response. We used the largest sample of patients with 3D spine reconstructions to characterize the vertebra and disc morphologic changes that accompany growth modulation during the first two years following VBT. METHODS: A multicenter registry was used to identify idiopathic scoliosis patients who underwent VBT with 2 years of follow-up. Calibrated biplanar X-rays obtained at longitudinal timepoints underwent 3D reconstruction to obtain precision morphological measurements. GM was defined as change in instrumented coronal angulation from post-op to 2-years. RESULTS: Fifty patients (mean age: 12.5 ± 1.3yrs) were analyzed over a mean of 27.7 months. GM was positively correlated with concave vertebra height growth (r = 0.57, p < 0.001), 3D spine length growth (r = 0.36, p = 0.008), and decreased convex disc height (r = - 0.42, p = 0.002). High modulators (patients experiencing GM > 10°) experienced an additional 1.6 mm (229% increase) of mean concave vertebra growth during study period compared to the Poor Modulators (GM < - 10°) group, (2.3 vs. 0.7 mm, p = 0.039), while convex vertebra height growth was similar (1.3 vs. 1.4 mm, p = 0.91). CONCLUSION: When successful, VBT enables asymmetric vertebra body growth, leading to continued postoperative coronal angulation correction (GM). A strong GM response is correlated with concave vertebral body height growth and overall instrumented spine growth. A poor GM response is associated with an increase in convex disc height (suspected tether rupture). Future studies will investigate the patient and technique-specific factors that influence increased growth remodeling.

A Unique Presentation of Vertebral Body Osteochondroma of Sixth Cervical Spine Causing Myelopathic Symptoms: Management with En bloc Excision and Cervical Fusion.

Introduction: Vertebral body osteochondroma presenting with myelopathic symptoms is exceptionally rare entity of spinal osteochondroma which arises from the posterior surface of vertebral body and leading to spinal canal stenosis and cord compression. Early definitive diagnosis and subsequent successful treatment is necessary in such cases to prevent life threatening complications. Case Report: In this context, we report a case of a 20-years old female presented with mechanical neck pain, unsteady gait, giddiness with neurological deficit for the past 3 months. An MRI of the cervical spine revealed a mass growing from the posterior aspect of the C6 vertebral body and extending toward the vertebral canal, causing marked spinal cord compression. Conclusion: The following case report not only describes the rare presentations of vertebral body osteochondroma but also emphasizes on surgical management by en bloc resection of tumor and anterior cervical fusion, resulting in a favorable outcome without any recurrence.

A Comparative Evaluation of Unilateral and Bilateral Sequential Lung Isolation for Vertebral Body Tethering: A Retrospective Propensity Matched Analysis.

BACKGROUND: Vertebral body tethering (VBT) requires a thoracoscopic approach to visualize the vertebral bodies. Lung collapse and re-expansion have the potential to cause acute lung injury, resulting in increased oxygen and ventilation requirements. AIMS: We compared the intraoperative ventilator management, intra- and postoperative blood gas determinations, and hospital stay information between adolescents undergoing unilateral versus bilateral lung isolation for vertebral body tethering. METHODS:  A study cohort of 132 propensity-matched cases (66 unilateral and 66 bilateral) was derived from 351 consecutive VBT cases. Patient demographic information, case information, fluid administration, ventilatory settings data, blood gas parameters, and complete blood count and differential data were entered into a datasheet. Derived parameters included values calculated from the alveolar gas equation to develop an oxygen cascade and measures of inflammatory response. Chi-square was used for categorical data, and independent samples and t-tests were used for continuous data. RESULTS: The double lung isolation group required higher peak inspiratory pressures (SL 29±5 vs. DL 31±5, p=0.026), resulting in higher tidal volume (SL 246±63 vs. DL 334±101, p<0.001) and tidal volume per kg (SL 5.6±1.4 vs. DL 6.9±2, p<0.001) as compared to the single lung group. The double lung group required a higher partial pressure of inspired and alveolar oxygen as well as a higher alveolar to arterial oxygen tension gradient (SL 417±126 vs. DL 485±96, p=0.001) to achieve optimal arterial oxygen tension. Patients with double lung isolation had similar intensive care lengths of stay but a longer hospital stay than single lung isolation patients. CONCLUSION: Patients undergoing double lung isolation required greater ventilatory support and had more evidence of acute lung injury, as evidenced by a higher postoperative alveolar to arterial oxygen gradient; however, these healthy adolescents tolerated the procedure well and only differed in the hospital length of stay by a day.

COVID-19 significantly impacted initial consultation for idiopathic scoliosis.

INTRODUCTION: Since the outbreak of the COVID-19 pandemic, reduction of social activities and rapid adoption of telemedicine, decreasing face-to-face encounters seems to have negatively affected the timely Idiopathic Scoliosis (IS) referral with a spine specialist. We aim to document the progression of IS curves during COVID-19 pandemic reflected by the late presentation of patients at the initial visit with higher Cobb angles and to evaluate its influence on health-related quality of life scores. MATERIALS AND METHODS: All IS patients scheduled for surgery between April 2019 and September 2021 were recruited in a prospective cohort study. The patients were divided into five cohorts of 6 month duration each according to their booking date: 2 periods before the 1st COVID-19 wave, one period during and two periods afterwards. In each cohort, patients were divided into 3: those who were scheduled for posterior spinal fusion (PSF) at 1st visit, those booked for vertebral body tethering (VBT) at 1st visit, and those scheduled for surgery but who have failed brace treatment. Variables included age, gender, Risser grade and preoperative SRS-22 scores. Chi2 and ANOVA tests were used for comparison. RESULTS: 173 patients were analyzed. 33 patients (13.1 ± 3 y.o.) were scheduled between Apr and Sept 2019; 38 (13.1 y.o. ± 2) between Oct 2019 and Mar 2020; 31 (13.4 ± 3 y.o.) between Apr and Sept 2020; 30 (14.3 ± 2 y.o.) between Sept 2020 and Mar 2021; and 41 patients (13.8 ± 2 y.o.) between Apr and Sept 2021. Non-statistically significant differences were found between periods before, during or after the COVID-19 first wave regarding patients' age, gender, Risser grade and SRS-22 scores. Average Cobb angles of patients at their 1st visit after the beginning of the COVID-19 pandemic were significantly higher than those before COVID-19 (52.2° ± 7° and 56.6° ± 13° vs 47.8° ± 12° and 45.2° ± 13°; p = 0.0001). More patients were booked for PSF (p < 0.0000) through the five evaluated periods, while the indication of VBT or surgery in patients previously braced progressively decreased. CONCLUSION: Patients presented at the scoliosis clinic for the 1st time after the 1st COVID-19 wave with significantly larger Cobb angles, and likely contributed to an increased proportion of PSF, as the potential window for bracing or VBT was missed due to a delayed consultation.

Flexible posterior vertebral tethering for the management of Scheuermann's kyphosis: correction by using growth modulation-clinical and radiographic outcomes of the first 10 patients with at least 3 years of follow-up.

PURPOSE: The present prospective cohort study was intended to present the minimum 3 years' results of flexible posterior vertebral tethering (PVT) applied to 10 skeletally immature patients with SK to question, if it could be an alternative to fusion. METHODS: Ten skeletally immature patients with radiographically confirmed SK, who had flexible (minimum 35%) kyphotic curves (T2-T12), were included. A decision to proceed with PVT was based on curve progression within the brace, and/or persistent pain, and/or unacceptable cosmetic concerns of the patient/caregivers, and/or non-compliance within the brace. RESULTS: Patients had an average age of 13.1 (range 11-15) and an average follow-up duration of 47.6 months (range 36-60). Posterior vertebral tethering (PVT) was undertaken to all patients by utilizing Wiltse approach and placing monoaxial pedicle screws intermittently. At the final follow-up: mean pre-operative thoracic kyphosis and lumbar lordosis improved from 73.6°-45.7° to 34.7°-32.1°. Mean sagittal vertical axis, vertebral wedge angle and total SRS-22 scores improved significantly. A fulcrum lateral X-ray obtained at the latest follow-up, showed that the tethered levels remained mobile. CONCLUSION: This study, for the first time in the literature, concluded, that as a result of growth modulation applied to skeletally immature patients with SK, flexible PVT was detected to yield gradual correction of the thoracic kyphosis by reverting the pathological vertebral wedging process, while keeping the mobility of the tethered segments in addition to successful clinical-functional results. The successful results of the present study answered the role of the PVT as a viable alternative to fusion in skeletally immature patients with SK. LEVEL OF EVIDENCE: IV.

[Application of self-stabilizing zero-profile three-dimensional printed artificial vertebral bodies for treatment of cervical spondylotic myelopathy].

Objective: To evaluate the safety and effectiveness of applying self-stabilizing zero-profile three-dimensional (3D) printed artificial vertebral bodies in anterior cervical corpectomy and fusion (ACCF) for cervical spondylotic myelopathy. Methods: A retrospective analysis was conducted on 37 patients diagnosed with cervical spondylotic myelopathy who underwent single-level ACCF using either self-stabilizing zero-profile 3D-printed artificial vertebral bodies ( n=15, treatment group) or conventional 3D-printed artificial vertebral bodies with titanium plates ( n=22, control group) between January 2022 and February 2023. There was no significant difference in age, gender, lesion segment, disease duration, and preoperative Japanese Orthopedic Association (JOA) score between the two groups ( P>0.05). Operation time, intraoperative bleeding volume, hospitalization costs, JOA score and improvement rate, incidence of postoperative prosthesis subsidence, and interbody fusion were recorded and compared between the two groups. Results: Compared with the control group, the treatment group had significantly shorter operation time and lower hospitalization costs ( P<0.05); there was no significant difference in intraoperative bleeding volume between the two groups ( P>0.05). All patients were followed up, with a follow-up period of 6-21 months in the treatment group (mean, 13.7 months) and 6-19 months in the control group (mean, 12.7 months). No dysphagia occurred in the treatment group, while 5 cases occurred in the control group, with a significant difference in the incidence of dysphagia between the two groups ( P<0.05). At 12 months after operation, both groups showed improvement in JOA scores compared to preoperative scores, with significant differences ( P<0.05); however, there was no significant difference in the JOA scores and improvement rate between the two groups ( P>0.05). Radiographic examinations showed the interbody fusion in both groups, and the difference in the time of interbody fusion was not significant ( P>0.05). At last follow-up, 2 cases in the treatment group and 3 cases in the control group experienced prosthesis subsidence, with no significant difference in the incidence of prosthesis subsidence ( P>0.05). There was no implant displacement or plate-screw fracture during follow-up. Conclusion: The use of self-stabilizing zero-profile 3D-printed artificial vertebral bodies in the treatment of cervical spondylotic myelopathy not only achieves similar effectiveness to 3D-printed artificial vertebral bodies, but also reduces operation time and the incidence of postoperative dysphagia.

[Treatment of cervical ossification of posterior longitudinal ligament with titanium alloy trabecular bone three-dimensional printed artificial vertebral body].

Objective: To evaluate the effectiveness of using titanium alloy trabecular bone three-dimensional (3D) printed artificial vertebral body in treating cervical ossification of the posterior longitudinal ligament (OPLL). Methods: A retrospective analysis was conducted on clinical data from 45 patients with cervical OPLL admitted between September 2019 and August 2021 and meeting the selection criteria. All patients underwent anterior cervical corpectomy and decompression, interbody bone graft fusion, and titanium plate internal fixation. During operation, 21 patients in the study group received titanium alloy trabecular bone 3D printed artificial vertebral bodies, while 24 patients in the control group received titanium cages. There was no significant difference in baseline data such as gender, age, disease duration, affected segments, or preoperative pain visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), vertebral height, and C 2-7Cobb angle ( P>0.05). Operation time, intraoperative blood loss, and occurrence of complications were recorded for both groups. Preoperatively and at 3 and 12 months postoperatively, the functionality and symptom relief were assessed using JOA scores, VAS scores, and NDI evaluations. The vertebral height and C 2-7 Cobb angle were detected by imaging examinations and the implant subsidence and intervertebral fusion were observed. Results: The operation time and incidence of complications were significantly lower in the study group than in the control group ( P<0.05), while the difference in intraoperative blood loss between the two groups was not significant ( P>0.05). All patients were followed up 12-18 months, with the follow-up time of (14.28±4.34) months in the study group and (15.23±3.54) months in the control group, showing no significant difference ( t=0.809, P=0.423). The JOA score, VAS score, and NDI of the two groups improved after operation, and further improved at 12 months compared to 3 months, with significant differences ( P<0.05). At each time point, the study group exhibited significantly higher JOA scores and improvement rate compared to the control group ( P<0.05); but there was no significantly difference in VAS score and NDI between the two groups ( P>0.05). Imaging re-examination showed that the vertebral height and C 2-7Cobb angle of the two groups significantly increased at 3 and 12 months after operation ( P<0.05), and there was no significant difference between 3 and 12 months after operation ( P>0.05). At each time point, the vertebral height and C 2-7Cobb angle of the study group were significantly higher than those of the control group ( P<0.05), and the implant subsidence rate was significantly lower than that of the control group ( P<0.05). However, there was no significant difference in intervertebral fusion rate between the two groups ( P>0.05). Conclusion: Compared to traditional titanium cages, the use of titanium alloy trabecular bone 3D-printed artificial vertebral bodies for treating cervical OPLL results in shorter operative time, fewer postoperative complications, and lower implant subsidence rates, making it superior in vertebral reconstruction.

Are Variable Screw Angle Change and Screw-to-Vertebral Body Ratio Associated With Radiographic Subsidence Following Anterior Cervical Discectomy and Fusion?

STUDY DESIGN: Retrospective Cohort. OBJECTIVE: This study aims to assess the easily measurable radiographic landmarks of screw-to-vertebral body ratio and changes in screw angle to identify if they are associated with early subsidence following an Anterior cervical discectomy and fusion (ACDF). METHODS: A retrospective cohort study was conducted on patients undergoing 1-3 level ACDF with allograft or PEEK cages. Preoperative, immediate postoperative, and 6-month postoperative radiographs were analyzed to measure intradiscal height (or distance between 2 vertebral bodies) as an anterior vertebral distance (AVD), middle (MVD), and posterior (PVD), screw angle, screw-to-vertebral body length ratio, and interscrew distance. Multivariate stepwise regression analyses were performed. RESULTS: 92 patients were included (42 single-level, 32 two-level, and 18 3-level ACDFs). In single-level ACDFs, a decrease in the caudal screw angle was associated with a decrease in AVD (=.001) and MVD (P = .03). A decrease in the PVD was associated with a decrease in segmental lordosis (P < .001). For two-level ACDFs, a higher caudal screw-to-body ratio was associated with a lower MVD (P = .01). CONCLUSION: Six months following an ACDF for degenerative pathology, a decrease in the caudal screw angle was associated with an increase in radiographic subsidence at the antero-medial aspect of the disc space albeit largely subclinical. This suggests that the caudal screw angle change may serve as a reliable radiographic marker for early radiographic subsidence. Furthermore, a greater screw-to-vertebral body ratio may be protective against radiographic subsidence in two-level ACDF procedures.

Innovative technologies in thoracolumbar and lumbar spine surgery failing to reach standard of care: state-of-art review.

PURPOSE: To evaluate previously popular technologies in the field of spine surgery, and to better understand their advantages and limitations to the current standards of care. Spine surgery is an ever-evolving field that serves to resolve various spinal pathologies in patients of all ages. While there are established treatments for various conditions, such as lumbar spinal stenosis, idiopathic scoliosis, and degenerative lumbar disease, there is always further research and development in these areas to produce innovative technologies that can lead to better outcomes. As this process progresses, we must remind ourselves of previously tried and tested inventions and their outcomes that have fallen short of becoming a standard to ensure we are able to learn lessons from the past. METHODS: A thorough literature review was conducted with the aim of compiling literature of previously utilized technologies in spine surgery. Biomedical databases were utilized to gather relevant articles including PubMed, MEDLINE, and EMBASE. Emphasis was placed on gathering articles with technologies or therapeutics aimed at treating common spinal pathologies including lumbar spinal stenosis (LSS), adolescent idiopathic scoliosis (AIS), and other degenerative lumbar spine diseases. The keywords used were: "failed technologies", "historical technologies", "spine surgery", "spinal stenosis", "adolescent idiopathic scoliosis", and "degenerative lumbar spine disease". A total of 47 articles were gathered after initial review. RESULTS: Different technologies pertaining to spine surgery were identified and critically evaluated. Some of these technologies included X-STOP, Vertiflex, Vertebral Body Stapling, and Dynesys. These technologies were evaluated for their strengths and limitations across their spinal pathology applications. While each type of technology had their benefits, the data tended to be mixed with various limitations across studies. CONCLUSION: These technologies have been trialed in the field of spine surgery across various spinal pathologies, but still prove of limited efficacy and shortcomings to the current standards of care.

Delayed hemothorax after anterior vertebral body tethering in adolescent idiopathic scoliosis: a case report.

PURPOSE: The aim of this case report is to report that delayed hemothorax is possible after anterior vertebral body tethering (aVBT) and to illustrate the course of treatment. METHODS: We present a 15-year-old boy with adolescent idiopathic scoliosis who underwent an anterior thoracoscopic assisted vertebral body tethering who developed a massive right-sided hemothorax 12 days post-operatively. A chest tube was placed to drain the hemothorax and later required embolectomy with tissue plasminogen activator (TPA) to drain the retained hemothorax. RESULTS: At 1 month follow up post discharge the patient was asymptomatic, and radiograph did not demonstrate evidence of residual hemothorax and scoliosis. We have followed this patient for 5 years postoperative and he continues to do well clinically and radiographically. CONCLUSIONS: Pulmonary complications are a known drawback of anterior thoracoscopic spinal instrumentation. Delayed hemothorax is possible after aVBT. In the case of a retained hemothorax, chest tube treatment with TPA is a safe and effective method of embolectomy.

Measurement of distances and locations of thoracic and lumbar vertebral bodies from CT scans in cases of spinal deformation.

BACKGROUND: Spinal deformations, except for acute injuries, are among the most frequent reasons for visiting an orthopaedic specialist and musculoskeletal treatment in adults and adolescents. Data on the morphology and anatomical structures of the spine are therefore of interest to orthopaedics, physicians, and medical scientists alike, in the broad field from diagnosis to therapy and in research. METHODS: Along the course of developing supplementary methods that do not require the use of ionizing radiation in the assessment of scoliosis, twenty CT scans from females and males with various severity of spinal deformations and body shape have been analysed with respect to the transverse distances between the vertebral body and the spinous process end tip and the skin, respectively, at thoracic and lumbar vertebral levels. Further, the locations of the vertebral bodies have been analysed in relation to the patient's individual body shape and shown together with those from other patients by normalization to the area encompassed by the transverse body contour. RESULTS: While the transverse distance from the vertebral body to the skin varies between patients, the distances from the vertebral body to the spinous processes end tips tend to be rather similar across different patients of the same gender. Tables list the arithmetic mean distances for all thoracic and lumbar vertebral levels and for different regions upon grouping into mild, medium, and strong spinal deformation and according to the range of spinal deformation. CONCLUSIONS: The distances, the clustering of the locations of the vertebral bodies as a function of the vertebral level, and the trends therein could in the future be used in context with biomechanical modeling of a patient's individual spinal deformation in scoliosis assessment using 3D body scanner images during follow-up examinations.

Clinical outcome after dorso-ventral stabilization of the thoracolumbar and lumbar spine with vertebral body replacement and dorsal stabilization.

PURPOSE: Surgical stabilization of the spine by vertebral body replacement (VBR) is used for spinal disorders such as traumatic fractures to provide an anatomical re-adjustment of the spine to prevent late detrimental effects and pain [1-4]. This study addresses the clinical outcome after a ventral intervention with VBR and bisegmental fusion. METHODS: The study includes 76 patients (mean age: 59.34 ± 15.97; 34 females and 42 males) with fractures in the lower thoracic and lumbar spine. They were selected from patients of our hospital who received an anterolateral VBR surgery on the corresponding lower spine region over a nine-year period. Only patients were examined with X-rays and complete follow-up records. Exclusion criteria were changes due to degeneration and pathological fractures. Patients were divided into two groups, the thoracotomy group (Th10-L1) and the lumbotomy group (L2-5), respectively. Minimum one year after surgery, patients were asked about their well-being using a precasted questionnaire. RESULTS: No significant differences with respect to the subjective impression of the patients concerning their back pain, spinal functional impairment, their general functional status and their quality of life impairment. Unfortunately, however, only a rather modest but significant increase of the post-surgical life quality was reported. CONCLUSIONS: Patients who underwent VBR in the lower thoracic or lumbar spine show modest long-term well-being. The results suggest that injuries to the lower thoracic or lumbar spine requiring vertebral body replacement should be classified as severe injuries since they adversely affect the patients' long-term well-being. TRIAL REGISTRATION: Study of clinical outcome of patients after vertebral body replacement of the ventral thoracal and lumbal spine, DRKS00031452. Registered 10th March 2023 - Prospectively registered. Trial registration number DRKS00031452.

Simulative investigation of the required level of geometrical individualization of the lumbar spines to predict fractures.

Injury mechanisms of the lumbar spine under dynamic loading are dependent on spine curvature and anatomical variation. Impact simulation with finite element (FE) models can assist the reconstruction and prediction of injuries. The objective of this study was to determine which level of individualization of a baseline FE lumbar spine model is necessary to replicate experimental responses and fracture locations in a dynamic experiment.Experimental X-rays from 26 dynamic drop tower tests were used to create three configurations of a lumbar spine model (T12 to L5): baseline, with aligned vertebrae (positioned), and with aligned and morphed vertebrae (morphed). Each model was simulated with the corresponding loading and boundary conditions from dynamic lumbar spine experiments. Force, moment, and kinematic responses were compared to the experimental data. Cosine similarity was computed to assess how well simulation responses match the experimental data. The pressure distribution within the vertebrae was used to compare fracture risk and fracture location between the different models.The positioned models replicated the injured spinal level and the fracture patterns quite well, though the morphed models provided slightly more accuracy. However, for impact reconstruction or injury prediction, the authors recommend pure positioning for whole-body models, as the gain in accuracy was relatively small, while the morphing modifications of the model require considerably higher efforts. These results improve the understanding of the application of human body models to investigate lumbar injury mechanisms with FE models.

Analysis of three-dimensional spine growth for vertebral body tethering patients at 2 and 5 years post operatively.

PURPOSE: Scoliosis can be treated with vertebral body tethering (VBT) as a motion-sparing procedure. However, the knowledge of how growth is affected by a tether spanning multiple levels is unclear in the literature. Three-dimensional true spine length (3D-TSL) is a validated assessment technique that accounts for the shape of the spine in both the coronal and sagittal planes. This study aimed to assess if 3D-TSL increases over a five-year period after VBT implantation in thoracic curves for idiopathic scoliosis. METHODS: Prospectively collected radiographic data from an international pediatric spine registry was analyzed. Complete radiographic data over three visits (post-operative, 2 years, and 5 years) was available for 53 patients who underwent VBT. RESULTS: The mean age at instrumentation of this cohort was 12.2 (9-15) years. The average number of vertebrae instrumented was 7.3 (SD 0.7). Maximum Cobb angles were 50° pre-op, which improved to 26° post-op (p < 0.001) and was maintained at 5 years (30°; p = 0.543). Instrumented Cobb angle was 22° at 5 years (p < 0.001 vs 5-year maximum Cobb angle). An accentuation was seen in global kyphosis from 29° pre-operative to 41° at 5 years (p < 0.05). The global spine length (T1-S1 3D-TSL) started at 40.6 cm; measured 42.8 cm at 2 years; and 44.0 cm at the final visit (all p < 0.05). At 5 years, patients reached an average T1-S1 length that is comparable to a normal population at maturity. Immediate mean post-operative instrumented 3D-TSL (top of UIV-top of LIV) was 13.8 cm two-year length was 14.3 cm; and five-year length was 14.6 cm (all p < 0.05). The mean growth of 0.09 cm per instrumented level at 2 years was approximately 50% of normal thoracic growth. Patients who grew more than 0.5 cm at 2 years had a significantly lower BMI (17.0 vs 19.0, p < 0.05) and smaller pre-operative scoliosis (48° vs 53°, p < 0.05). Other subgroup analyses were not significant for age, skeletal maturity, Cobb angles or number of spanned vertebras as contributing factors. CONCLUSIONS: This series demonstrates that 3D-TSL increased significantly over the thoracic instrumented levels after VBT surgery for idiopathic scoliosis. This represented approximately 50% of expected normal thoracic growth over 2 years.

Three-dimensional vertebral shape changes confirm growth modulation after anterior vertebral body tethering for idiopathic scoliosis.

PURPOSE: To evaluate three-dimensional (3D) vertebra and disk shape changes over 2 years following anterior vertebral body tether (AVBT) placement in patients with idiopathic scoliosis (IS). METHODS: Patients with right thoracic IS treated with AVBT were retrospectively evaluated. 3D reconstructions were created from biplanar radiographs. Vertebral body and disk height (anterior, posterior, left and right) and shape (wedging angle) were recorded over the three apical segments in the local vertebral reference planes. Changes in height and wedging were measured through 2 years postoperatively. Change in patient height was correlated with changes in the spine dimensions. RESULTS: Forty-nine patients (Risser 0-3, Sanders 2-4) were included. The mean age was 12.2 ± 1.4 years (range 8-14). The mean coronal curve was 51 ± 10° preoperatively, 31 ± 9° at first postoperative time point and 27 ± 11° at 2-year follow-up (p < 0.001). The mean patient height increased 8 cm by 2 years (p < 0.001). The left side of the spine (vertebra + disc) grew in height by 2.2 mm/level versus 0.7 mm/level on the right side (p < 0.001). This differential growth was composed of 0.5 mm/vertebral level and 1.0 mm/disk level. Evaluation of the change in disk heights showed significantly decreased height anteriorly (- 0.4 mm), posteriorly (- 0.3 mm) and on the right (- 0.5 mm) from FE to 2 years. Coronal wedging reduced 2.3°/level with 1.1°/vertebral level change and 1.2°/disk level. There was no differential growth in the sagittal plane (anterior/posterior height). Patient height change moderately correlated with 3D measures of vertebra + disk shape changes. CONCLUSIONS: Three-dimensional analysis confirms AVBT in skeletally immature patients results in asymmetric growth of the apical spine segments. The left (untethered) side length increased more than 3 × than the right (tethered) side length with differential effects observed within the vertebral bodies and disks, each correlating with overall patient height change.

More anterior bone loss in middle vertebra after contiguous two-segment cervical disc arthroplasty.

BACKGROUND: Contiguous two-segment cervical disc arthroplasty (CDA) is safe and effective, while post-operative radiographic change is poorly understood. We aimed to clarify the morphological change of the three vertebral bodies operated on. METHODS: Patients admitted between 2015 and 2020 underwent contiguous two-level Prestige LP CDA were included. The follow-up was divided into immediate post-operation (≤ 1 week), early (≤ 6 months), and last follow-up (≥ 12 months). Clinical outcomes were measured by Japanese Orthopedic Association (JOA) score, visual analogue score (VAS), and neck disability index (NDI). Radiographic parameters on lateral radiographs included sagittal area, anterior-posterior diameters (superior, inferior endplate length, and waist length), and anterior and posterior heights. Sagittal parameters included disc angle, Cobb angle, range of motion, T1 slope, and C2-C7 sagittal vertical axis. Heterotopic ossification (HO) and anterior bone loss (ABL) were recorded. RESULTS: 78 patients were included. Clinical outcomes significantly improved. Of the three operation-related vertebrae, only middle vertebra decreased significantly in sagittal area at early follow-up. The four endplates that directly meet implants experienced significant early loss in length. Sagittal parameters were kept within an acceptable range. Both segments had a higher class of HO at last follow-up. More ABL happened to middle vertebra. The incidence and degree of ABL were higher for the endplates on middle vertebra only at early follow-up. CONCLUSION: Our findings indicated that after contiguous two-segment CDA, middle vertebra had a distinguishing morphological changing pattern that could be due to ABL, which deserves careful consideration before and during surgery.