A Morphometric Study of the Retromolar Fossa and the Incidence of the Retromolar Foramen in Dry Human Mandibles.

INTRODUCTION: The mandible is the largest and strongest facial bone which plays a crucial role for various surgeries and diagnostic imaging. The retromolar fossa, located behind the third molar socket on each side, was observed for morphometry of anterior, medial, and posterior borders. The present study aimed to assess the retromolar fossa and the presence of retromolar foramen. METHODS: This cross-sectional study was conducted on 30 dry mandibles of adult humans of unknown sex; morphometry of retromolar foramen was done using three parameters: anteriorly, laterally, and posteroinferiorly. Dimensions of the retromolar trigone were seen with notable differences between the right and left sides. RESULTS: Dimensions of the anterior border had a mean of 12.34±1.175 mm on the right side and 12.56±1.46 mm on the left side. The mean of the medial border of the trigone on the right side was 20.23±2.84 mm and on the left side was 21.48±2.57 mm. The lateral border had the mean value of 18.33±3.56 mm and 19.21±3.93 mm on the right and left sides respectively. The P-value of the medial border was found to be statistically significant (P=0.02). Retromolar foramen was observed in 60% of mandibles; six were unilateral and 12 were bilateral. These foramina were closer to the anterior border of the retromolar trigone as compared to the anterior border of the ramus and lingula of the mandibles. CONCLUSIONS: The awareness of these findings is crucial for the prevention of complications, such as neurovascular damage, during surgeries in this region. This knowledge is particularly relevant in addressing oral pathologies and extracting third molars, contributing to improved surgical outcomes and patient safety.

Prevalence of accessory mental foramen and lateral lingual foramen using cone beam computed tomography: A single-center cross-sectional study.

PURPOSE: This study aimed to assess the prevalence, dimensions, and positions of accessory mental foramen (AMF) and lateral lingual foramen (LLF) in an Iranian population using cone beam computed tomography (CBCT). METHODS AND MATERIALS: In this cross-sectional study, CBCT images of 2082 patients were retrospectively reviewed based on inclusion criteria, including images from the mandibular region taken in the past five years with accurate demographic data. Exclusion criteria included images with significant pathologies, fractures, or poor quality. CBCT images were captured, and AMF and LLF presence (primary outcome variable), dimensions, and positions (secondary outcome variables) were recorded relative to the mental foramen and adjacent teeth. Data analysis was performed using the Chi-square test with a 5% significance level. RESULTS: A total of 2082 CBCT samples (46.54% females and 53.46% males) with a mean age of 48.30 ± 12.70 years were examined. Among these, 246 AMFs were observed in 222 individuals with a prevalence at the foramen level of 11.815%, with 24 having two AMFs. AMF was mostly observed unilaterally, with bilateral occurrence noted in 10.81% of patients with AMF. Additionally, 86 patients were found to have LLF with a prevalence at the foramen level of 5.907%. There were no significant differences between genders in AMF and LLF prevalence. CONCLUSION: AMF and LLF were detectable using CBCT in the selected Iranian population. AMF was commonly situated posterior and superior to the mental foramen, while LLF was often found near the first premolar. This knowledge is crucial for preventing nerve injury during surgery and ensuring effective nerve block procedures.

Diffuse Large B-Cell Lymphoma in a Cynomolgus Monkey.

A captive 17-year-old male cynomolgus monkey (Macaca fascicularis) developed diffuse large B-cell lymphoma (DLBCL). This was the first report of DLBCL presenting with a mandible mass and violation of the paranasal sinus in a cynomolgus monkey. The neoplasm showed marked microscopical malignant aspects. Immunohistochemical staining showed strong positive expression of CD20. These features may contribute to the diagnosis and therapeutics of DLBCL in NHPs.

Establishment of an Animal Model of Oral Squamous Cell Carcinoma Invading the Mandible.

OBJECTIVE: To establish an animal model of oral squamous cell carcinoma invading the mandible through multi-sample experiments that verified the stability, repeatability, tumorigenicity and mandible destruction rate of the model. METHODS: Oral squamous cell carcinoma cell suspension was injected into the outer side of the mandible through the anterior edge of the masseter muscle of naked mice to observe the tumourforming process. Then, the anatomical, histological and imaging examinations were carried out to determine whether the tumour had invaded the mandible. By comparing the tumour growth of multiple groups of various squamous cell carcinoma cells (CAL27, HN6 and HN30 cells), the changes in body weight and characteristics of tumour formation were compared, and the experience was summarised to further verify the stability, repeatability, tumour formation rate and arch damage rate of the model. RESULTS: The subsequent specimens of tumour-bearing nude mice were validated once the model had been established. In vitro, tumour tissue wrapped around the mandible's tumour-bearing side, and the local texture was tough with no resistance to acupuncture. Haematoxylin and eosin staining revealed that squamous cells were infiltrating the mandible in both the horizontal and sagittal planes. Microcomputed tomography results showed that the mandible on the tumour-bearing side displayed obvious erosion damage. Cell lines with various passage rates clearly had diverse tumour-bearing life cycles. CONCLUSION: This study successfully established an animal model of oral squamous cell carcinoma invasion of the mandible. The model has excellent biological stability, repeatability, tumorigenesis rate and mandible destruction rate.

Finite Element Assessment of a Novel Patient-Specific Mandibular Implant for Severely Atrophic Ridge.

Purpose: Dental reconstruction for patients diagnosed with severe mandibular bone atrophy using common dental implants is a challenging process. In such cases, surgeons may encounter challenges such as insufficient available bone, soft tissue, damage to the inferior alveolar nerve, and even the risk of bone fracture. In this study, a new design concept of mandibular patient-specific implants for severely atrophic ridges followed by finite element evaluation was presented to investigate the mechanical functionality of the concept. Method: The implant is comprised of two modular parts including an inferior border cover and a horseshoe-shaped structure. This horseshoe segment fits into the cover and is then screwed to it using two screws on each side. A 1 mm deflection was applied to a reference point located between the two anterior posts to extract the resulting Von Mises stress distribution in each part and the reaction force on the reference point which corresponds to the chewing force that the patient must apply to deform the horseshoe. This 1 mm gap is a design consideration and critical distance that horseshoe contacts the gingiva and disturbs the alveolar nerve. Results: The results revealed that load was transmitted from the horseshoe to the cover, and there were no stress contours on the body of the mandible. However, stress concentration was observed in screw locations in the mandible, the amount of which was decreased by increasing the number of used screws. In horseshoe, stress concentration values were around 350 MPa, and the measured reaction force on the reference point was just under 200 N. Conclusion: The finite element analysis results showed that this concept would be functional as the minimum load would be transmitted to the mandibular ridge, and since the patients diagnosed with atrophic ridge are not able to apply load to an amount near 200 N, the horseshoe would not contact the gingiva. Also, it is concluded that increasing the number of bone screw fixations would decrease the risk of long-term screw loosening.

Imaging approach for jaw and maxillofacial bone tumors with updates from the 2022 World Health Organization classification.

Jaw and maxillofacial bone lesions encompass a wide variety of both neoplastic and non-neoplastic pathologies. These lesions can arise from various tissues, including bone, cartilage, and soft tissue, each presenting distinct challenges in diagnosis and treatment. While some pathologies exhibit characteristic imaging features that aid in diagnosis, many others are nonspecific. This overlap often necessitates a multimodal imaging approach, combining techniques such as radiographs, computed tomography, and magnetic resonance imaging to achieve a diagnosis or narrow the diagnostic considerations. This article provides a comprehensive review of the imaging approach to jaw and maxillofacial bone tumors, including updates on the 2022 World Health Organization classification of these tumors. The relevant anatomy of the jaw and dental structures that is important for accurate imaging interpretation is discussed.

Osteosarcoma of Mandible - A Case Report.

After plasma cell neoplasia, osteosarcoma is the most common primary bone tumor which accounts for 20% of all sarcomas. A malignant tumor is characterized by the formation of bone or osteoid by tumor cells. Long bones are the most common site of involvement. In the jaw bones, approximately 5% of involvement with an incidence of 1 in 1.5 million persons per year. It develops in a broad range of ages but is more common in the third and fourth decades, slightly more often in the mandible than in the maxilla. In this case report, a 24-year-old male patient reported a mass in the left mandible for the past 1 week which appeared after the third molar extraction. In the orthopantomogram, a loss of lamina dura and a change in the trabecular pattern was noted. Histopathological findings were suggestive of osteoblastic osteogenic sarcoma. The patient underwent a hemi-mandibulectomy followed by chemotherapy. The main aim of this case report was to focus on the importance of early diagnosis of this tumor based on clinical and radiographic examinations, particularly taking into account the fast progression and aggressiveness of this neoplasm.

A Case of an Ossifying Fibroma of the Mandible Suspected as a Static Bone Cavity.

Ossifying fibroma (OF) is a benign fibro-osseous lesion characterized by the proliferation of fibrous connective tissue containing immature bone and/or cementum-like hard tissue. Although the pathogenesis of OF remains unclear, trauma, previous extractions, and periodontitis are considered potential trigger factors. OF is more common in women aged from the second to fourth decades. Clinically, OF is characterized by slow-growing and asymptomatic swelling, often observed incidentally on radiological examinations. OF occurs more frequently in the mandible, particularly above the mandibular canal. Herein, we present a rare case of OF in an 18-year-old man initially misdiagnosed as a static bone cavity. The lesion was first observed as a radiolucent finding below the left mandibular canal on a panoramic radiograph. Later, cone-beam computed tomography (CBCT) imaging revealed the presence of calcifications within the lesion. Additionally, CBCT confirmed the presence of the lesion within the lingual cortical bone, revealing lingual swelling and thinning of the outer cortex. Enucleation was successfully performed under general anesthesia without any postoperative complications. Histopathological examination confirmed the diagnosis of OF, revealing mineralized tissue and proliferating fibrous connective tissue. This case underscores the challenges in diagnosing OF, particularly when it is located below the mandibular canal, emphasizing the importance of thorough imaging and differential diagnosis to avoid misinterpretation as a static bone cavity.

Not All Chubby Cheeks Are Cute: A Case of Cherubism.

The growth of the jaw occurs painlessly in cherubism, a rare genetic disorder where normal bone is replaced by fibrous tissue and undeveloped bone. Usually running in families, this non-cancerous genetic condition naturally reaches a limit and stops growing. The main characteristic is the aberrant growth of osseous and fibrous tissue in the maxilla and mandible, which is frequently seen in children. Cherubism is inherited autosomal dominantly, though reports have included individuals without a family history. The disorder has specific radiographic and histological features that drastically affect facial appearance. This article provides a thorough case study of a male 16-year-old with cherubism, emphasizing management techniques and clinical and radiological results. Radiological imaging is essential for diagnosis and management because it can identify the distinctive features of cherubism and the treatment implications associated with it.

Does mandible ramus height asymmetry affect postoperative skeletal stability in orthognathic surgery patients?

BACKGROUND: Relapses following orthognathic surgery have been reported to exceed 2% to 50%, depending on multiple factors. This study aimed to analyze the stability after orthognathic surgery in patients with mandibular ramus height asymmetry through 3D reconstruction using Cone-beam CT. METHODS: This retrospective cohort study investigated patients who underwent mandibular setback surgery using bilateral sagittal split ramus osteotomy. Three-dimensional CT scans were taken at three different time points. Evaluation of the postoperative stability involved measuring changes in the x, y, and z axes as well as roll and yaw rotations of the mandible at specific landmarks (B point, mental foramen) on 3D CT scans obtained immediately after surgery and 6-12 months postoperatively. They were categorized into four groups based on bilateral mandibular height asymmetry through Asymmetry index (AI). The one-way ANOVA was implemented to compare the intergroup differences and Tukey's post hoc test was employed. Additionally, the Pearson correlation coefficient was also calculated. RESULTS: A total of 24 patients were included in this study. The corresponding AI, representing the degree of asymmetry in both mandibles, were calculated as Group 1 was 1.25 ± 0.64%, Group 2 was 2.89 ± 0.47%, Group 3 was 5.03 ± 0.51%, and Group 4 was 9.40 ± 1.99%. The x-axis change in Group 4 was significantly larger at 1.71 mm compared to Group 1 at 0.64 mm. The mandibular roll, Group 4 showed a statistically significant increase at 1.33° compared to Group 1 at 0.35°. And there was a significant positive correlation observed between x-axis change and AI (p = 0.019), as well as between mandibular roll and AI (p = 0.025). CONCLUSION: After orthognathic surgery, stability was influenced by numerous factors, with the findings of this study suggesting that the degree of ramus height asymmetry in the mandible can be considered one contributing factor.

Does crown-to-implant ratio affect marginal bone loss around a single short implant at the posterior of the mandible?

Context: Short implants are acceptable treatment options for atrophic ridges; however, they increase the crown-to-implant (C/I) ratio compared to regular length implants. The study aimed to assess the correlation between the C/I ratio and marginal bone loss (MBL) in single short implants at the posterior of the mandible. Aims: The study aimed to assess the correlation between the C/I ratio and MBL in single short implants at the posterior of the mandible. Settings and Design: Cross-sectional study. Materials and Methods: This cross-sectional study assessed short implants with 6 mm lengths at the posterior of the mandible. The long-cone peri-apical digital radiographs were taken immediately after loading and 24 months later. Age, gender, implant diameter, gingival biotype, and implant brands were the study variables, and the C/I ratio was the predictive factor. The mean MBL at 2 years was considered the study outcome. Statistical Analysis Used: The Pearson correlation test was applied to assess the correlation between MBL and C/I. Results: Seventy implants (36 Straumann and 34 SGS implants) were studied. A significant difference was observed in the mean MBL between the two implant brands (P < 0.001). Besides, a correlation was found between MBL and the C/I ratio (P = 0.002). Conclusions: It seems that the C/I ratio is associated with an MBL increase in single short implants at the posterior of the mandible.

Multilocular Radiolucent Pathology in the Body and Ramus of the Mandible: A Case Report.

Odontogenic keratocyst (OKC), a type of epithelial developmental cyst, is frequently found in the jaw region. It has invasive characteristics such as satellite cysts, rapid progression, and tissue expansion. The OKC often favors the mandibular angle and ascending ramus. OKC symptoms include pain, swelling, displacement or malpositioning of adjacent teeth, and erosion or thinning of the limited or no bucco-lingual cortical expansion. There is radiographic evidence of a distinct, often scalloped, radiolucent lesion with a characteristic "soap bubble" or "honeycomb" appearance. This article reports a female patient, aged 40 years, with the main concern of unilateral pain and swelling of the mandibular left side and the provisional diagnosis of ameloblastoma. After histopathological examination, the final diagnosis of the patient was OKC. This article also includes previously published literature on OKC with differential diagnosis and relevant clinical and radiologic findings of the case.

Mandible development under gestational protein restriction: cellular and molecular mechanisms.

Insufficient evidence regarding how maternal undernutrition affects craniofacial bone development persists. With its unique focus on the impact of gestational protein restriction on calvaria and mandible osteogenesis, this study aims to fill, at least in part, this gap. Female mice were mated and randomized into NP (normal protein) or LP (low protein) groups. On the 18th gestational day (GD), male embryos were collected and submitted to microtomography (µCT), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), PCR, and autophagy dynamic analyses. The study shows that the LP offspring exhibited lower body mass than the NP group, with µCT analysis revealing no volumetric differences in fetus's head. EDS analysis showed lower calcium and higher phosphorus percentages in mandibles and calvaria. SEM assessment evidenced higher hydroxyapatite crystal-like (HC) deposition on the calvaria surface in LP fetus. Conversely, lower HC deposition was observed on the mandible surface, suggesting delayed matrix mineralization in LP fetuses with a higher percentage of collagen fibers in the mandible bone. The autophagy process was reduced in the mesenchyme of LP fetuses. PCR array analysis of 84 genes revealed 27 genes with differential expression in the LP progeny-moreover, increased mRNA levels of Akt1, Mtor, Nfkb, and Smad1 in the LP offspring. In conclusion, the results suggest that gestational protein restriction anticipated bone differentiation in utero, before 18GD, where this process is reduced compared to the control, leading to the reduction in bone area at 15 postnatal day previously observed. These findings provide insights into the molecular and cellular mechanisms of mandible development and suggest potential implications for the Developmental Origins of Health and Disease (DOHaD).

Impact of COVID-19 Disease on the Development of Osteomyelitis of Jaws: A Systematic Review.

Background/Objectives: Osteomyelitis is characterized by an inflammatory process affecting both bone and bone marrow, leading to cell death and the formation of bone sequestrum. Recent literature from the past five years has documented instances of osteomyelitis following infections of SARS-CoV-2. This systematic review explores the link between osteomyelitis of the jaw (OMJ) and COVID-19 infections. Methods: This review adhered to the PRISMA guidelines, systematically analyzing literature from 2020 to 2024 sourced from databases including Medline, Embase, Scopus, and Web of Science. PROSPERO ID: CRD42024526257. Results: The review selected 42 articles, detailing 201 cases of osteomyelitis of the jaw related to COVID-19 (COMJ). The demographic breakdown included 195 male (74.4%) and 67 female patients (25.6%), with a median age of 52.7 years, ranging from 24 to 71 years. A significant portion of COMJ patients (41.5%) were hospitalized due to COVID-19, and 58.5% received corticosteroid therapy. Diabetes mellitus was a common comorbidity among COMJ patients (65.1%). Most cases involved maxilla (182 cases; 90.5%), with nearly half showing sinus involvement (49.4%). The mandible was affected in 19 cases (9.5%). Mucormycosis and aspergillosis emerged as the predominant fungal infections, identified in 103 (51.2%) and 50 (24.9%) cases, respectively. Conclusions: Individuals with pre-existing health conditions such as diabetes mellitus who have been treated for COVID-19 are at an increased risk of developing OMJ, particularly maxillary fungal osteomyelitis. COMJ poses a significant diagnostic and therapeutic challenge for dental and maxillofacial professionals, who are often the first to encounter these cases.

Utilization of a Cortical Xenogeneic Membrane for Guided Bone Regeneration: A Retrospective Case Series.

Background: Guided bone regeneration (GBR) is a reliable technique used in vertical and horizontal bone defects. The posterior mandibular region is an area limited by anatomic constraints. The use of resorbable membranes with a cortical component could compensate for the lack of rigidity of resorbable membranes without the complications of non-resorbable membranes. The aim of this study was to evaluate the mean bone gains of a xenogeneic cortical membrane in horizontal and vertical bone defects in comparison with other membranes in the literature. Methods: A porcine cortical membrane was used to perform 7 GBR in the posterior mandibular region of five patients. Preoperative (T0) and six months postoperative (T1) cone beam computed tomography were superimposed to measure the horizontal and vertical bone gain. Implants were positioned at all sites, six months after GBR. Complications and bone resorption around the implants were also documented. Results: The mean horizontal and vertical bone gains were 3.83 ± 1.41 mm and 4.17 ± 1.86 mm, respectively. The analysis of repeatability was 0.997. As many as 40% of patients experienced pain refractory to analgesics. No exposure or infectious phenomenon was observed. Conclusions: This xenogeneic cortical membrane seemed to provide interesting results in the regeneration of horizontal and vertical bone defects. Comparative and prospective studies are necessary to validate the effectiveness of this membrane.

Deep learning segmentation of mandible with lower dentition from cone beam CT.

OBJECTIVES: This study aimed to train a 3D U-Net convolutional neural network (CNN) for mandible and lower dentition segmentation from cone-beam computed tomography (CBCT) scans. METHODS: In an ambispective cross-sectional design, CBCT scans from two hospitals (2009-2019 and 2021-2022) constituted an internal dataset and external validation set, respectively. Manual segmentation informed CNN training, and evaluations employed Dice similarity coefficient (DSC) for volumetric accuracy. A blinded oral maxillofacial surgeon performed qualitative grading of CBCT scans and object meshes. Statistical analyses included independent t-tests and ANOVA tests to compare DSC across patient subgroups of gender, race, body mass index (BMI), test dataset used, age, and degree of metal artifact. Tests were powered for a minimum detectable difference in DSC of 0.025, with alpha of 0.05 and power level of 0.8. RESULTS: 648 CBCT scans from 490 patients were included in the study. The CNN achieved high accuracy (average DSC: 0.945 internal, 0.940 external). No DSC differences were observed between test set used, gender, BMI, and race. Significant differences in DSC were identified based on age group and the degree of metal artifact. The majority (80%) of object meshes produced by both manual and automatic segmentation were rated as acceptable or higher quality. CONCLUSION: We developed a model for automatic mandible and lower dentition segmentation from CBCT scans in a demographically diverse cohort including a high degree of metal artifacts. The model demonstrated good accuracy on internal and external test sets, with majority acceptable quality from a clinical grader.

Evaluation of Root Canal Morphology of Mandibular Premolars Using Cone-beam Computed Tomography in Golestan Province, North of Iran.

Introduction: Successful endodontic treatment depends on completely clearing, shaping, and filling the prepared canals. Knowledge of the common and aberrant varying pulp anatomies is essential for suitable root canal treatment. Since, this anatomy is complex and varies morphologically in different populations. This study aims to determine the number of roots, canals, and evaluation of mandibular premolars canals using cone-beam computed tomography (CBCT) images in one of Iran's northern provinces (Golestan). Materials and Methods: CBCT axial, coronal, and sagittal slices of two hundred and twelve mandibular premolars were analyzed to determine the number of roots and canals based on Vertucci type. The images were analyzed in a one-millimeter slice in mesiodistal and buccolingual dimensions based on gender. The data were analyzed using the Chi-score test to compare the components if the defaults were not established. A significance level of 0.05 was considered. Result: Of the two hundred twelve teeth evaluated, 130 (61.3%) were first premolars, and 82 (38.6%) were second premolars. Most first premolars (78.5%) and almost all second premolars (97.6%) had one root. Morphological types of root canals were identified based on Vertucci's classification types I, II, III, IV, V, or VIII, and type I was the most frequent. There were no significant associations between number of roots and sex (P>0.05). Conclusion: Mandibular premolars mostly had one root and type I Vertucci morphology. The frequency of two-canal premolars was higher in the male population. Although the abundance of two or three roots with different morphologies was also observed, the possibility of the presence of an additional root canal should be considered.

A new biomechanical model of the mammal jaw based on load path analysis.

The primary function of the tetrapod jaw is to transmit jaw muscle forces to bite points. The routes of force transfer in the jaw have never been studied, but can be quantified using load paths--the shortest, stiffest routes from regions of force application to support constraints. Here we use load path analysis to map force transfer from muscle attachments to bite point and jaw joint, and to evaluate how different configurations of trabecular and cortical bone affect load paths. We created three models of the mandible of the Virginia opossum, Didelphis virginiana, each with a cortical bone shell, but with different material properties for the internal spaces: a cortical-trabecular model, in which the interior space is modeled with bulk properties of trabecular bone; a cortical-hollow model, in which trabeculae and mandibular canal are modeled as hollow; and a solid-cortical model, in which the interior is modeled as cortical bone. The models were compared with published in vivo bite force and bone strain data, and the load paths calculated for each model. The cortical-trabecular model, which most closely approximates the actual morphology, was best validated by in vivo data. In all three models the load path was confined to cortical bone, although its route within the cortex varied depending on the material properties of the inner model. Our analysis shows that most of the force is transferred through the cortical, rather than trabecular bone, and highlights the potential of load path analysis for understanding form-function relationships in the skeleton.

From SPECT/CT towards absolute quantification? - the case of unilateral condylar hyperplasia of the mandible.

BACKGROUND: Unilateral condylar hyperplasia (UCH) of the mandible is a rare condition characterized by asymmetric growth of the mandibular condyles. Bone scintigraphy with SPECT(/CT) is commonly used to diagnose UCH and guide treatment. Still, varying results have been reported using the traditional threshold of 55%:45% in relative tracer uptake. While absolute quantification of uptake on SPECT/CT could improve results, optimal correction and reconstruction settings are currently unknown. METHODS: Three anthropomorphic phantoms representing UCH were developed from patient CT volumes and produced using 3D printing technology. Fillable spherical inserts of different sizes (Ø: 8-15 mm) were placed in the condylar positions representing symmetrical and asymmetrical distributions. Recovery coefficients were determined for SPECT/CT using various reconstruction corrections, including attenuation and scatter correction (ACSC), resolution modeling (RM), and partial volume correction (PVC) using phantom measurements. Uptake ratios between condyles and condyle to clivus were evaluated. Finally, the impact of these correction techniques on absolute activity and diagnostic accuracy was assessed in a retrospective patient cohort for the diagnostic threshold of 55%:45%. RESULTS: The activity was only partially recovered in all spherical inserts (range: 22.5-64.9%). However, RM improved relative recovery by 20.2-62.3% compared to ACSC. In the symmetric phantoms, the 95% confidence interval (CI) of condyle ratios included the diagnostic threshold (57.6%:42.4%) for UCH when using ACSC potentially leading to false positives, but not for ACSCRM datasets. Partial volume corrections coefficients from the NEMA IQ phantom was positionally dependent, with improvements seen performing PVC using coefficients derived from anthropomorphic phantoms. Retrospective application in a patient cohort showed only a weak linear correlation (R²: 0.25-0.67) and large limits of agreement (9.6-12.5%) between different reconstructions. Up to 44% of patients were reclassified using the 55%:45% threshold. Using clinical outcome data, ACSCRM had highest sensitivity (91%; 95% CI 59-100%) and specificity (66%; 95% CI 47-81%), significantly improving specificity (P = 0.038). CONCLUSIONS: Anthropomorphic phantoms were shown to be essential in determining optimal settings for acquisition, reconstruction, and analysis. SPECT/CT reconstructions with attenuation and scatter correction and resolution modeling are recommended and could improve specificity when using the 55%:45% threshold to assess condylar growth.