ABSTRACT
Introduction Determination of gender can be highly accurate with a complete adult skeleton, but in scenarios like mass disasters, only fragmented bones might be available. In such cases, identifying gender relies significantly on which parts of the skeleton are found. The mandible is a notably distinct bone in the skull and can be key in determining gender, especially when the entire skull is not available. The mandibular features provide clues that can help forensic experts determine the gender of an individual. Aim of the study This preliminary study aimed to determine the gender of an individual using mandibular parameters such as coronoid ramus height, condylar ramus height, projective ramus, minimum ramus breadth, and maximum ramus breadth. The objectives of this study were to (i) determine the gender of an individual using various mandibular parameters, (ii) evaluate the effectiveness of these mandibular parameters in distinguishing between male and female individuals, and (iii) establish a reliable method for gender identification based on the measured mandibular parameters. Materials and methods Since it was a preliminary study, the sample size calculation was done using G*Power software (Version 3.1.9.4; Heinrich-Heine-Universität Düsseldorf, Düsseldorf, Germany). The sample size was determined to guarantee a 95% statistical power at a significance level (alpha error probability) of 0.05. To ensure sufficient statistical power, a total of 100 samples were included, with a projected sample size of 92. A total of 100 samples, evenly split between 50 males and 50 females aged 20 to 30 years, were analyzed. Orthopantomograms (OPGs) showing pathologies, fractures, developmental disturbances of the mandible, and edentulous mandibles were excluded from the study. Statistical analysis was performed using SPSS for Windows, Version 16.0 (Released 2007; SPSS Inc., Chicago, IL, USA). Additionally, an accuracy test, analysis of variance (ANOVA), multiple regression, and discriminant analysis for gender were performed on individual data. Results In this study, five mandibular parameters were analyzed for gender such as coronoid ramus height, condylar ramus height, projective ramus, minimum ramus breadth, and maximum ramus breadth showed a positive correlation comparatively, and a novel formula was developed. Conclusion According to the present study, panoramic radiography can be considered a valuable tool in sex determination (with an accuracy of 90%), and all parameters of the mandible exhibited sexual dimorphism, showing they are reliable parameters with a total accuracy of 90%. However, coronoid ramus height, projective ramus, and maximum ramus breadth played a significant role in identifying gender in this particular study.
ABSTRACT
Odontogenic keratocyst (OKC), a type of epithelial developmental cyst, is frequently found in the jaw region. It has invasive characteristics such as satellite cysts, rapid progression, and tissue expansion. The OKC often favors the mandibular angle and ascending ramus. OKC symptoms include pain, swelling, displacement or malpositioning of adjacent teeth, and erosion or thinning of the limited or no bucco-lingual cortical expansion. There is radiographic evidence of a distinct, often scalloped, radiolucent lesion with a characteristic "soap bubble" or "honeycomb" appearance. This article reports a female patient, aged 40 years, with the main concern of unilateral pain and swelling of the mandibular left side and the provisional diagnosis of ameloblastoma. After histopathological examination, the final diagnosis of the patient was OKC. This article also includes previously published literature on OKC with differential diagnosis and relevant clinical and radiologic findings of the case.
ABSTRACT
INTRODUCTION: Superior and inferior ramus fractures, termed straddle fractures, are high-energy fractures often accompanied by unstable pelvic ring injuries. However, consensus is lacking regarding indications for surgical treatment or fixation methods. We aimed to compare clinical and radiological outcomes of unilateral ramus fixation (URF) and bilateral ramus fixation (BRF) for straddle fractures with unilateral posterior pelvic ring injuries. MATERIALS AND METHODS: We enrolled 118 patients (73 males, 45 females; mean age, 47 years) diagnosed with straddle fractures between March 2015 and December 2021 with > 1 year of follow-up. Patients were divided into URF (n = 60) and BRF (n = 58) groups based on the anterior pelvic ring fixation method. Preoperative factors including body mass index, diabetes, smoking, injury mechanism, injury severity score, American Society of Anesthesiologists classification system, Tile classification, and Young and Burgess classification were compared. Intraoperative blood loss, operation time, postoperative bone union rate, complications, and the need for additional surgeries were analyzed. RESULTS: There were no statistically significant preoperative differences between the two groups. However, the URF group showed a significantly lower mean operative time and blood transfusion requirement (63 min and 2 units, respectively) than the BRF group (104 min and 3 units, respectively) (both p < 0.001). Postoperatively, bone union was achieved in 57 (95.0%) and 56 (96.6%) patients in the URF and BRF groups, respectively. Complications occurred in 17 (28.3%) and 14 (24.1%) patients in the URF and BRF groups, respectively, with additional surgeries needed in 3 (5.0%) patients in the URF group and 2 (3.4%) patients in the BRF group. CONCLUSIONS: Unilateral anterior fixation can provide sufficient stability and clinical effectiveness in the surgical treatment of straddle fractures in areas with posterior pelvic ring injuries. Compared with bilateral anterior fixation, unilateral fixation significantly reduces operation time and blood loss, making it a viable fixation method for straddle fractures.
ABSTRACT
Objective: This study aims to identify fracture patterns on the lingual aspect of the mandible following Bilateral Sagittal Osteotomy of the Mandibular Ramus and correlate these patterns with mandibular anatomical characteristics in patients with cleft lip and palate. Methods: Two hundred cone beam CT scans were analyzed, with 100 scans in the preoperative period to assess mandibular anatomy and 100 in the postoperative period to evaluate the course of fractures on the lingual surface after surgery. Results: Statistical analysis revealed no correlation between the depth of the mandibular fossa and the type of fracture after bilateral sagittal osteotomy. Similarly, there was no association between the height and angle of the mandibular body and the type of fracture. The most common fracture type observed was the type 3 pattern, characterized by a line running through the mandibular canal. Furthermore, no relationship was identified between the studied anatomical aspects and the occurrence of undesired fractures. Conclusions: The anatomical data presented in this study can assist surgeons in selecting the safest surgical techniques and optimal osteotomy sites, particularly in patients with cleft lip and palate.
Objetivo: Este estudio tiene como objetivo identificar los patrones de fractura en la superfície lingual de la mandíbula después de la osteotomía sagital bilateral de la rama mandibular y correlacionar estos patrones con las características anatómicas mandibulares en pacientes com fisura labiopalatina. Métodos: Se analizaron doscientas tomografías computarizadas de haz cónico, con cien tomografías en el período preoperatorio para evaluar la anatomía mandibular y cien en el período postoperatorio para evaluar el curso de las fracturas en la superficie lingual después de la cirugía. Resultados: El análisis estadístico no reveló correlación entre la profundidad de la fosa mandibular y el tipo de fractura después de la osteotomía sagital bilateral. Del mismo modo, no hubo asociación entre la altura y el ángulo del cuerpo mandibular y el tipo de fractura. El tipo de fractura más común observado fue el patrón tipo 3, caracterizado por una línea que atraviesa el canal mandibular. Además, no se identificó relación entre los aspectos anatómicos estudiados y la ocurrencia de fracturas no deseadas. Conclusiones: Los datos anatómicos presentados en este estudio pueden ayudar a los cirujanos a seleccionar las técnicas quirúrgicas más seguras y los sitios de osteotomía óptimos, especialmente en pacientes con fisura labiopalatina.
ABSTRACT
Background Gender determination is critical to forensic science and medico-legal applications. Given that it is the most dimorphic bone in the skull and is frequently found intact, the mandibular bone may be extremely important in determining gender. Orthopantomograms (OPGs) are quite helpful in accurately estimating age and sex in this regard. It is a laborious task for forensics to determine the gender of victims of mass casualties, natural disasters, and severely dismembered bodies. The mandible, which is susceptible to development spurts, has a high degree of accuracy for determining sex. Aim This study aims to evaluate the potential use of coronoid height and condylar height as reliable anatomical markers for determining gender. Materials and methods In this study, 100 samples were used as study samples, 50 of which were male and 50 of which were female, in the age group of 20-30 years. The OPGs were obtained using a Planmeca Promax Scara 3 Digital OPG Machine (Planmeca, Helsinki, Finland), with settings of 70 kVp, 8 mA for 0.9 seconds, ensuring a 1:1 ratio. The images were then transferred to Planmeca Romexis® Viewer Software, Version 6.0 (Planmeca Oy, Helsinki, Finland) for measurement recording. Results Descriptive statistical analysis was done for this study and discriminant analysis was also done to create a population-specific formula. Results showed that the standard mean error for males concerning condylar height was 2.3 and coronoid height was 0.7. The standard mean error for females by condylar height was 1.6 and coronoid height was 0.6. The p-value was significant for coronoid height in both males and females. The p-value was not clinically significant for condylar height in both males and females. Conclusion The study's findings indicate that a larger mandibular angle is advantageous for gender assessment and helps with gender dimorphism. Out of both the parameters evaluated, coronoid height has shown statistical significance in both males and females. Hence, the study concludes that the parameter, coronoid height can be utilized to assess the gender of an individual.
ABSTRACT
Coronary artery disease continues to remain the leading cause of mortality worldwide. Coronary blood supply is provided through the right and left main coronary arteries. The left main coronary artery (LMCA) in turn gives rise to the left anterior descending (LAD) and left circumflex (LCX) arteries. In some cases, LMCA may trifurcate into the ramus intermedius (RI) in addition to the LAD and LCX arteries. Atherosclerotic plaque formation and rupture with subsequent clot formation and occlusion of coronary arteries are the underlying mechanisms of myocardial infarction. Though the clinical implications of the presence of ramus intermedius (RI) are controversial some data suggest that the RI is associated with an increased risk of atherosclerotic plaque formation in the LMCA and the proximal LAD. Conversely, it has been proposed that the RI provides an additional collateral source of blood supply to the myocardium and may potentially contribute to improved survival. Case reports tout the benefits of RI, specifically in the setting of multivessel coronary artery occlusions. Whether it increases the risk of atherosclerotic plaque formation or whether it is protective has yet to be determined. We present a case of a 58-year-old male who presented with acute coronary syndrome and cardiogenic shock due to total ostial occlusion of LAD. The patient had also chronic total occlusions of the right coronary artery and LCX but a patent RI, which was the only source of blood supply to the myocardium and practically determined the patient's survival. Additionally, we performed a literature review to identify similar cases, to support RI's potentially protective role in enhancing survival.
ABSTRACT
BACKGROUND: Management of inferior ramus of the pubis-ischium ramus remains controversial, and related research is sparse. The main intention of this study is to describe the biomechanical and clinical outcomes of pubis-ischium ramus fractures in Tile B pelvic injuries and to identify the feasibility and necessity of fixation of the inferior ramus of the pubis-ischium ramus. METHODS: This study comprised two parts: a biomechanical test and a retrospective clinical study. For the biomechanical tests, Tile B-type pelvic injuries were modeled in six cadaver specimens by performing pubis-ischium osteotomies and disruption of the anterior and interosseous sacroiliac ligaments. The superior and/or inferior rami of the pubis-ischium ramus were repaired with reconstruction plates and separated into three groups (A, B, and C). Specimens were placed in the standing position and were loaded axially with two-leg support for three cycles at 500 N. The displacements of sacroiliac joints at osteotomy were measured with Vernier calipers and compared using statistical software. To investigate the clinical outcomes of this technique, 26 patients were retrospectively analyzed and divided into a superior ramus fixation group (Group D) and a combined superior and inferior ramus of the pubis-ischium ramus fixation group (Group E). The main outcome measures were time of operation, blood loss, postoperative radiographic reduction grading, and functional outcomes. RESULTS: In the vertical loading test, Group E showed better pelvic ring stability than Group D (P < 0.05). However, the shift of the sacroiliac joints was almost identical among the three groups. In our clinical case series, all fractures in Group E achieved bony union. Group E demonstrated earlier weight-bearing functional exercise (2.54 ± 1.45 vs 4.77 ± 2.09; P = 0.004), earlier bony union (13.23 ± 2.89 vs 16.55 ± 3.11; P = 0.013), and better functional outcomes (89.77 ± 7.27 vs 82.38 ± 8.81; P = 0.028) than Group D. The incidence of sexual dysfunction was significantly lower in Group E than that in Group D (2/13 vs 7/13; P = 0.039). Bone nonunion occurred in two patients in Group D, and two patients in Group E had heterotopic ossification. None of the patients exhibited wound complications, infections, implant failures, or bone-implant interface failures. CONCLUSIONS: Fixation of the inferior ramus of a pubis-ischium ramus fracture based on conventional fixation of the anterior pelvic ring is mechanically superior in cadaveric Tile B pelvic injury and shows rapid recovery, good functional outcomes, and low incidence of complications.
Subject(s)
Bone Plates , Pelvic Bones , Humans , Biomechanical Phenomena , Male , Female , Adult , Pelvic Bones/surgery , Pelvic Bones/injuries , Pelvic Bones/diagnostic imaging , Middle Aged , Mechanical Phenomena , Cadaver , Fractures, Bone/surgery , Retrospective Studies , Fracture Fixation, Internal/instrumentationABSTRACT
Introduction The mandible constitutes one of the skull's largest and strongest bones. Growth spurts can influence it, and it has a variety of dimorphic traits that can be used to identify sex. In addition to observing, comparing, and evaluating the potential for mandibular ramus flexure and bigonial breadth to discriminate between sexes using digital orthopantomograms (OPG), a retrospective study was conducted to examine the validity of this method for sex estimation in the Indian population. Aim and objective This study aims to quantify sexual dimorphism by analyzing two mandibular parameters, the ramus flexure and the bigonial width, using orthopantomography (OPG). The objective is to determine the accuracy of sex determination using the ramus flexure and bigonial width. Materials and methods A total of 500 OPG images (250 males and 250 females) were analyzed using the Planmeca software (Helsinki, Finland). The ramus flexure was measured as the angle formed between the tangent to the inferior border of the mandible and the tangent to the posterior border of the ramus. The bigonial width was measured as the distance between the left and right gonion points. A statistical analysis was performed to assess sexual dimorphism and determine the accuracy of sex determination using these parameters. The study employed descriptive statistics, such as means and standard deviations, and an independent t-test to determine the significance of the characteristics in relation to males and females. Results The mean bigonial width for females was 193.3068 mm (SD = 13.51669 mm) and for males was 217.6308 mm (SD = 10.87453 mm), with a statistically significant difference (p = 0.000). The 95% confidence interval for the difference in the bigonial width between males and females was between -49.97173 mm and -43.93787 mm. For the ramus flexure, the mean was 0.0000 for both males and females (SD = 0.00000), with a significant difference between males and females (p = 0.003). The 95% confidence interval for the difference in the ramus flexure between males and females was between -0.59543 and -0.12457. Conclusion The results indicated significant sexual dimorphism in both the ramus flexure and bigonial width. This study demonstrated that the ramus flexure and bigonial width, measured using orthopantomography (OPG), exhibited significant sexual dimorphism. The analysis of these mandibular parameters provided valuable information for sex determination in forensic and anthropological contexts.
ABSTRACT
BACKGROUND: Based on a three-dimensional (3D) orthognathic simulation, this technical report introduces a method for augmentation genioplasty using a proximal bone fragment of the mandible, which is typically discarded in intraoral vertical ramus osteotomy (IVRO). RESULTS: A 43-year-old female patient diagnosed with Class III malocclusion, presenting with a protruding mandible and long facial height, underwent surgical treatment. The surgical plan involved mandibular setback position using IVRO and augmentation genioplasty. The 3D orthognathic surgery including augmentation genioplasty simulation was performed. An excessively elongated proximal segment was sectioned following IVRO. The inferior part of the sectioned proximal bone fragment of the mandible was positioned to align with the requirements of advancement genioplasty. After ensuring that the placement of the fragment matched that of the simulated surgery, each bone fragment was fixed. At 1.5 years post-surgery, the grafted bone on the augmentation genioplasty was well maintained, with slight bone resorption. CONCLUSIONS: Augmentation genioplasty using the proximal bone fragment of the mandible, which is typically discarded in IVRO, reduces the surgical complications associated with chin osteotomy. When a secondary genioplasty is required, genioplasty with osteotomy, movement of the cut bone fragments, partial bone-shaving osteotomy, and additional bone grafting are viable options.
ABSTRACT
PURPOSE: Intraoral vertico-sagittal ramus osteotomy (IVSRO) was first reported by Choung in 1992 as a surgical procedure to decrease postoperative condylar dislocation. In 2017, Iwanaga et al. developed modified L-shaped IVSRO (mIVSRO) to reduce postoperative nerve dysfunction and achieved favorable outcomes. This study aimed to clarify the effect of mIVSRO on changes in temporomandibular joint (TMJ) symptoms and three-dimensional condylar position. METHODS: We conducted a retrospective study of thirty sides in fifteen Japanese adults diagnosed with jaw deformities who underwent mIVSRO and sagittal split ramus osteotomy (SSRO). TMJ symptoms were assessed chronologically, and the condylar long axis and the condylar position were analyzed two- and three-dimensionally using axial cephalograms and cone-beam computed tomography. RESULTS: Postoperative TMJ symptoms improved by 90% (9/10 sides) in the mIVSRO group and by 50% (7/14 sides) in the SSRO group. The mIVSRO group exhibited outward rotation of the condylar long axis, while the SSRO group exhibited inward rotation. Moreover, mIVSRO induced residual anteromedial-inferior deviation of the condyle. The inclination angle of the condylar process was not significantly different between the two procedures pre- and postoperatively. CONCLUSION: These results clearly demonstrated the effect of mIVSRO on symptomatic TMJ. Residual changes in the position of the condyle following mIVSRO may not affect jaw function.
Subject(s)
Cone-Beam Computed Tomography , Mandibular Condyle , Osteotomy, Sagittal Split Ramus , Temporomandibular Joint Disorders , Humans , Retrospective Studies , Male , Mandibular Condyle/surgery , Mandibular Condyle/diagnostic imaging , Female , Adult , Osteotomy, Sagittal Split Ramus/methods , Temporomandibular Joint Disorders/surgery , Temporomandibular Joint Disorders/diagnostic imaging , Young Adult , Middle Aged , Cephalometry , Temporomandibular Joint/surgery , Temporomandibular Joint/diagnostic imaging , Imaging, Three-Dimensional , AdolescentABSTRACT
Forensic anthropology and forensic medicine both have been fascinating fields that deal with mandibular characteristics and sex determination. Researchers may determine an individual's biological sex with amazing precision by examining the size, shape, and proportions of the mandible. This information is useful for anthropological studies and criminal investigations. This systematic review aims to evaluate the consistency and validity of using mandibles as a method for gender determination across different populations. A systematic search was conducted in PubMed, Web of Science, and Scopus databases. Further, a manual search was carried out to find additional studies. Mandibular parameters and other relevant data about research were extracted from the included studies. Random effects meta-analysis was carried out for four parameters. A total of nine studies were included in the systematic review out of 76 initial search results. All studies were in vitro. Nine studies were included in the qualitative analysis, whereas only seven studies were included in the meta-analysis. A total of 2385 individuals (1193 male and 1192 female) were evaluated in the included studies. The parameters assessed were as follows: minimum ramus breadth (MiRB), maximum ramus breadth (MaRB), projective ramus height (PRH), bigonial width (BGW), gonial angle (GA), and antegonial angle (AGA). Meta-analysis was conducted for four parameters out of six. For the two parameters, meta-analysis was not conducted as only one study was evaluated. Meta-analyses of PRH obtained a high degree of heterogeneity (99%), mean difference (MD) of 4.06 mm, and p-value of p=0.09. Meta-analysis of BGW obtained 93% heterogeneity, MD of 9.03 mm, and p=0.0007. Meta-analysis of GA showed 99% heterogeneity, MD of 3.44 mm, and p=0.66. Meta-analysis of AGA obtained a low heterogeneity of 30%, MD of -0.77 mm, and p=0.23. The parameter, BGW, can be considered a useful tool in identifying sex. The parameters, PRH, GA, and AGA, cannot be preferred as a reliable tool in identifying the sex of an individual in forensic contexts.
ABSTRACT
Sturge-Weber syndrome (SWS) is characterized by hemangiomas, glaucoma, and central nervous system disorders. Here, we report the case of a 15-year-old boy with SWS and upper-lip hypertrophy who underwent surgical orthodontic treatment for correction of a large overjet and deep overbite. In addition to the a large overjet and deep overbite, interdental spacing was observed in both the arches. The mandible was retrognathic and deviated to the right side. No maxillary occlusal canting or temporomandibular joint symptoms were observed. The patient was diagnosed with skeletal maxillary protrusion with spaced dentition and mandibular deviation to the right due to SWS. After presurgical orthodontic treatment using a multibracket appliance, we performed a sagittal split ramus osteotomy (SSRO) alone due to the presence of a hemangioma around the maxilla. No abnormal bleeding or cerebral hemorrhage due to increased blood pressure was observed during the SSRO. Postoperatively, the maxillary and mandibular arches were well-aligned, the deep overbite and excessive overjet improved, and bilateral angle class I molar and canine relationships were established. Furthermore, mandibular deviation improved, and the midlines of both arches approximately coincided with the facial midline. In conclusion, orthognathic surgery is feasible in patients with SWS after carefully evaluating the sites and sizes of the hemangiomas.
ABSTRACT
BACKGROUND: This study was conceived to assess the postoperative stability of condylar position following fixation with miniplates and lag screws after bilateral sagittal split osteotomy (BSSO). METHODS: This retrospective study included a cohort of 20 patients undergoing BSSO using the Obwegeser-Dal Pont modification. The bony segments were stabilized using either miniplates with two 2.0-mm monocortical screws per segment or three 2.0-mm bicortical lag screws along the mandible's superior border. Pre- and postoperative (7-day interval) spiral computed tomography scans were conducted to assess skeletal changes across both groups. Data analysis employed Wilcoxon signed-rank and Wilcoxon rank-sum tests (α = 0.05). RESULTS: No statistically significant difference was observed between the pre-and postoperative condylar position parameters (P>0.05). However, the lag screw group showed a marginal significant increase in the left condyle's angulation (preoperative: 24.83 ± 6.37 vs. postoperative: 32.5 ± 4.93; P = 0.04). Changes in condylar height, length, and width were not statistically significant before and after BSSO in either groups (P>0.05). Nor was any statistically significant difference found between the miniplates and lag screws groups regarding condylar position parameters (P>0.05). CONCLUSION: The results indicated that both lag screw and miniplate fixation methods can be effectively employed in BSSO procedures without impacting condylar position parameters. Thus, either fixation method can be chosen depending on factors such as the surgeon's preference and clinical outcomes.
Subject(s)
Bone Plates , Bone Screws , Mandibular Condyle , Osteotomy, Sagittal Split Ramus , Humans , Mandibular Condyle/diagnostic imaging , Mandibular Condyle/surgery , Retrospective Studies , Male , Female , Adult , Osteotomy, Sagittal Split Ramus/methods , Osteotomy, Sagittal Split Ramus/instrumentation , Young AdultABSTRACT
This article describes a novel minimally invasive technique for bilateral sagittal split osteotomy (BSSO) that aims to reduce surgical trauma while maintaining bone overlap and rigid internal fixation for proper consolidation of the bone segments. The technique involves a small vestibular mucoperiosteal incision made on the lateral aspect of the mandible between the first and second molars, enabling a standard ramus split, surgical segment movement, and miniplate fixation. A retrospective evaluation of 67 consecutive patients who underwent BSSO using this protocol showed favorable split of the mandible with no unfavorable splits or non-union. Patients were discharged from hospital within an average of 17 h with minimal postoperative complications. This technique provides good surgical visualization with a very small incision and allows standard BSSO surgery without difficulty.
ABSTRACT
Background Forensic odontology has emerged as a crucial method for identifying skeletal or dental remains. Due to the restricted accuracy of current techniques for estimating age at death, researchers have endeavored to illustrate age-related alterations in dental hard tissues. Bone remodeling constitutes an ongoing and intricate process throughout our lifespan. It is believed that morphological changes in the mandible during an individual's lifetime are influenced by both dental condition and the individual's age. Objectives This study aims to evaluate the efficacy of mandibular parameters such as projective ramus height (PRH), maximum ramus breadth (MaRB), bigonial width (BGW), antegonial depth (Ant.D), and antegonial angle (Ant.A), as a gender-determining tool and compare and analyze the mandibular parameter measurements using digital orthopantomography. Methodology In this study, the total number of samples used was 500 out of which 250 were males and 250 were females. Planmeca software (Version 6.0, Planmeca Romexis, Charlotte, NC) was used and the accuracy test, analysis of variance (ANOVA), multiple regression, and discriminant analysis for gender were performed using SPSS for Windows, Version 16.0 (SPSS Inc., Chicago, IL). Results For age estimation, the least standard error of 0.008 was observed for BGW. A maximum standard error of 0.230 was observed for Ant.D. For sex determination, the coefficient function was positive for PRH, BGW, and Ant.A, with values of 0.202, 0.805, and 0.052, respectively. Ant.D and MaRB both exhibited negative values of -0.204 and -0.379, respectively. Conclusions Out of all the parameters assessed, BGW is the most preferred parameter for age estimation and Ant.A can be preferred for sex estimation. Age and gender can be estimated using the two parameters in the Indian population.
ABSTRACT
INTRODUCTION: Periprosthetic fractures in total hip arthroplasty (THA) have been well described and studied. However, there is a lack of reports on ipsilateral pubic ramus fractures during THA due to the rare occurrence of such fractures and ambiguity of symptoms. With the use of postoperative computed tomography (CT) examinations, we have identified that asymptomatic ipsilateral pubic ramus fractures occur frequently during THA. This study aims to evaluate the incidence, location, clinical outcomes, and risk factors of ipsilateral pubic ramus fractures during THA. METHODS: From May 2022 to March 2023, a single surgeon performed 203 THAs in 183 patients at a single institution. All patients underwent postoperative CT scans three days after THA. The patients with ipsilateral pubic ramus fractures were followed up for a minimum of six months. Basic demographics, osteoporosis, general conditions of the operations, and outcomes of THA were investigated in all patients. RESULTS: Twenty-two cases (10.8%) of ipsilateral pubic ramus fractures were identified on postoperative CT scans. All fractures were located near the origin of the superior or inferior pubic ramus. Five fractures were detected on simple postoperative radiographs. The fractures did not cause any further complications at a minimum of six-month postoperative follow-up. Univariate and multivariate analyses did not identify any risk factors associated with these fractures. CONCLUSIONS: Although the incidence of ipsilateral pubic ramus fractures during THA is high, treatment is not required as they do not cause any significant clinical symptoms or affect the prognosis of THA. However, the possibility of occurrence of these fractures must be explained to the patients before surgery.
Subject(s)
Arthroplasty, Replacement, Hip , Pubic Bone , Tomography, X-Ray Computed , Humans , Arthroplasty, Replacement, Hip/adverse effects , Pubic Bone/injuries , Pubic Bone/diagnostic imaging , Female , Male , Aged , Middle Aged , Aged, 80 and over , Periprosthetic Fractures/epidemiology , Periprosthetic Fractures/etiology , Periprosthetic Fractures/diagnostic imaging , Periprosthetic Fractures/surgery , Risk Factors , Incidence , Adult , Retrospective Studies , Intraoperative Complications/epidemiology , Intraoperative Complications/etiologyABSTRACT
BACKGROUND: Approximately 38,000 scoliosis surgery correction operations are performed annually in the United States; these operations are associated with considerable postoperative pain which can be difficult to manage. This is largely attributed to an incision spanning multiple vertebral segments with paraspinal muscle dissection and retraction to facilitate the implantation of segmental hardware and rods. Frequently utilized analgesic modalities include intravenous patient-controlled analgesia and epidural analgesia, often in combination. We sought to ascertain the feasibility and analgesic efficacy of continuous thoracolumbar dorsal ramus nerve (TDRN) block using surgically placed multiorifice catheters. METHODS: Forty-two patients diagnosed with idiopathic scoliosis who underwent a posterior spinal fusion (PSF) were enrolled after consent was obtained. Patients were managed utilizing a standardized Enhanced Recovery After Surgery) protocol including a perioperative opioid-sparing regimen. Data were collected at specified time intervals during the recovery period. These data points included pain scores using the Numeric Rating Scale. Parenteral or both oral and parenteral opioid consumption doses were also collected every 4 hours. Any significant postoperative adverse events were recorded as well. RESULTS: A total of 42 patients had surgically placed TDRN catheters, and 40 patients were included in this study. The patients all reported low to moderate pain scores with low opioid consumption postoperatively, while the TDRN catheter delivery of local anesthetic analgesics did not result in significant complications. CLINICAL RELEVANCE: A regional technique utilizing TDRN catheters could be a valuable component of the postoperative pain management protocols for PSF surgery, and additional studies are warranted. CONCLUSION: This study evaluated the feasibility and analgesic efficacy of TDRN catheters for postoperative pain control following multilevel PSF for idiopathic scoliosis. Continuous local anesthetic delivery through TDRN catheters is a feasible and safe technique for postoperative pain control in these patients. Selective blockade of the dorsal rami might have benefits over epidural analgesia or other regional techniques.
ABSTRACT
CASE SERIES SUMMARY: A total of 13 cases of cats with a caudal mandibular fracture treated with a novel surgical technique using the Ramus Anatomical Plate system were reviewed. Preoperative, immediate postoperative and a minimum of 8 weeks postoperative CT images were required as inclusion criteria. The outcome and complications were determined from clinical data and radiographic follow-up examinations. All cases achieved adequate anatomical reduction, resulting in a functional and atraumatic occlusion postoperatively. No intraoperative complications were reported. Time to voluntary food intake was in the range of 1-25 days. No evidence of disruptions to the implants or screw loosening was observed in the 8-week postoperative CT imaging, with radiographic evidence of complete osseous union in all fractures. The most common postoperative complication was swelling at the surgical site. Two cats had postoperative exophthalmos due to retrobulbar haemorrhage, and one cat exhibited partial wound dehiscence 5 days postoperatively, which resolved with medical management. Longer-term complications included intraoral plate exposure in one cat, which required plate removal 10 months postoperatively. RELEVANCE AND NOVEL INFORMATION: In this case series, rigid internal fixation of caudal mandibular fractures using the Ramus Anatomical Plate osteosynthesis system was associated with a minimal complication rate, and satisfactory radiographic and clinical outcomes. The reported outcomes of this novel technique are favourable when compared with previous techniques described for the management of these fracture types.
Subject(s)
Bone Plates , Fracture Fixation, Internal , Mandibular Fractures , Cats/injuries , Animals , Bone Plates/veterinary , Fracture Fixation, Internal/veterinary , Fracture Fixation, Internal/methods , Mandibular Fractures/veterinary , Mandibular Fractures/surgery , Male , Female , Treatment Outcome , Postoperative Complications/veterinary , Tomography, X-Ray Computed/veterinary , Cat Diseases/surgeryABSTRACT
OBJECTIVE: The objective of this study was to evaluate the effect of orthognathic surgery on taste sensation. MATERIALS AND METHODS: Thirty-five patients scheduled to undergo Le Fort I osteotomy (LFIO), sagittal split ramus osteotomy (SSRO), and bimaxillary surgery (BMS) were evaluated by administering localized and whole-mouth taste tests preoperatively and postoperatively at months 1, 3, and 6. The patients were asked to identify the quality of four basic tastes applied to six locations on the palate and tongue and to rate the taste intensities they perceived. Taste recognition thresholds and taste intesity scores were evaluted according to operation groups and follow-ups. RESULTS: There were significant decreases in the quinine HCl recognition thresholds at the postoperative follow-ups compared to the preoperative in LFIO patients (p = 0.043). There were significant decreases in sucrose taste intensity scores in the right posterolateral part of the tongue at months 3 and 6 compared to preoperative in SSRO patients (p = 0.046), and significant increases in quinine HCL taste intensity scores in the right and left anterior parts of the tongue at month 6 compared to preoperative in LFIO patients (p < 0.05). CONCLUSION: Taste perception is affected due to potential damage to the chemosensory nerves during orthognathic surgical procedures. Generally, non-significant alterations have been observed in taste perception after orthognathic surgery, except for significant alterations in bitter and sweet taste perceptions. CLINICAL RELEVANCE: Maxillofacial surgeons should be aware of taste perception change after orthognathic surgery procedures and patients should be informed accordingly. THE TRIAL REGISTRATION NUMBER (TRN): NCT06103422/Date of registration: 10.17.2023 (retrospectively registered).
Subject(s)
Orthognathic Surgery , Orthognathic Surgical Procedures , Humans , Mandible/surgery , Orthognathic Surgical Procedures/methods , Osteotomy, Le Fort , Osteotomy, Sagittal Split Ramus/methods , Quinine , Taste , Taste PerceptionABSTRACT
Background: Precise knowledge of the mandibular foramen's location is essential for clinical and surgical procedures, especially the inferior alveolar nerve block. Variability in its position concerning different bony landmarks can significantly impact clinical outcomes. Materials and Methods: This study examined 30 Adult dry human mandibles to determine the mandibular foramen's positions in relation to specific bony landmarks: the occlusal plane, posterior border of the ramus, and lingula. Measurements were obtained using a calibrated digital caliper, and statistical analysis was performed. Results: The study revealed significant variations in the position of the mandibular foramen. In relation to the occlusal plane, the mandibular foramen was found at an average height of approximately 15.2 mm (±2.1 mm). Regarding the posterior border of the ramus, it was situated at an average distance of about 18.5 mm (±3.4 mm). In relation to the lingula, the average distance was approximately 21.8 mm (±4.0 mm). These results underscore the considerable individual differences and anatomical variations in the mandibular foramen's location among the studied specimens. Conclusion: The observed variations in the position of the mandibular foramen emphasize the need for clinicians and surgeons to be cognizant of these differences when performing procedures involving the inferior alveolar nerve block. Understanding these anatomical variations is crucial for enhancing clinical precision, reducing complications, and ensuring optimal outcomes.