Characterization of the MSAP Flap in Head and Neck Surgical Oncology: A 3D Cadaveric Study.

OBJECTIVES: The medial sural artery (MSA) perforator flap is a versatile free flap. However, the cutaneous perforators are not well characterized. The objectives of this pilot anatomical study were to: (1) visualize in three-dimensions, as in-situ, the origin, course, and distribution of the cutaneous perforators, (2) characterize the number and frequency of the perforators, and (3) quantify mean pedicle length. METHODS: Thirteen cadaveric specimens were dissected, digitized, and modeled in 3D. Three-dimensional models and dissection photographs were used to determine the origin, course, number, distribution, and pedicle length of MSA perforators. RESULTS: The most common pattern consisted of three perforators (39% of specimens). The maximum number of perforators identified was four (23%). The majority of specimens (92%) had a cutaneous perforator originating from the lateral branch of the MSA and coursed most frequently in the second (43%) and third (37%) quartiles of the length of the tibia. Mean pedicle length was 19.1 ± 6.9 cm. Perforators originating from the medial branch of the MSA were significantly (p < 0.05) shorter than those from the lateral branch and were found to course only in the first quartile. CONCLUSION: The 3D models constructed in this study provide a comprehensive overview of the location and course of the perforators, enabling measurement of parameters in 3D-space. Anatomical characterization of the MSA perforator flap using 3D analysis can assist reconstructive surgeons in understanding the relevant anatomy and optimizing the surgical technique for flap harvest. LEVEL OF EVIDENCE: N/A Laryngoscope, 2024.

Terminologica Anatomica2: are we working toward achieving a unified consensus based anatomical terminology?

This paper focuses on the authors perspectives of the terminology developed by the Gross and Clinical Anatomy Working Group for Terminologica Anatomica2. Terminologica Anatomica2 represents a great deal of work by the Gross and Clinical Anatomy Working Group of the Federative International Program for Anatomical Terminology. Listing of synonyms and eponyms can be of great utility in terms of historical translation. However, the initial goal of achieving an international standard for anatomical terminology derived through a scholarly, consensus based process has been lost in Terminologica Anatomica2 as it provides a variety of choices that can be used to name a particular structure, in contrast to Terminologica Anatomica1 where preferred terminology is explicitly stated.

Musculoaponeurotic architecture of the human masseter muscle: an in vivo ultrasonographic study of architectural changes during mandibular protrusion and lateral excursions.

OBJECTIVE: The present study evaluated the in vivo musculoaponeurotic architecture of the superficial head (SH) of the masseter muscle (MM) of asymptomatic participants in excursive mandibular movements compared to the relaxed state as examined with ultrasonography. It was hypothesized that the mean fiber bundle length (FBL) and mean height of the aponeurosis (HA) of the laminae of the SH would differ significantly between the relaxed state and protrusion, ipsilateral excursion, and contralateral excursion. STUDY DESIGN: The MM was studied volumetrically in 12 female and 12 male asymptomatic participants bilaterally by using ultrasound imaging. Mean FBL and HA in protrusion and ipsilateral and contralateral excursion were compared to these values in the relaxed state using paired t tests (P < .05). The intraclass correlation coefficient was used to assess intraexaminer reliability. RESULTS: The SH exhibited multiple laminae. Fiber bundles were found to attach to bone and the superior and inferior aponeuroses. Mean FBL was significantly shorter and mean HA significantly longer in protrusion and the excursions than in the relaxed state although the pattern of altered laminae and aponeuroses differed among the mandibular movements. Intraexaminer reliability was excellent. CONCLUSION: Specific changes in mean FBL and mean HA suggest differential contraction of the SH of the MM based on laminar morphology. These findings provide a baseline to investigate musculoaponeurotic changes in patients with myogenic masseter muscle pain.

Distribution, course, and spatial relationships of the saphenous nerve: A 3D neuroanatomical map for nerve stimulation.

The overall objective of this study was to construct a 3D neuroanatomical map of the saphenous nerve based on cartesian coordinate data to define its course in 3D space relative to bony and soft tissue landmarks. Ten lower limb embalmed specimens were meticulously dissected, digitized, laser scanned, and modelled in 3D. The course of the main branches, number of collateral branches, and relationship of saphenous nerve to the great saphenous vein were defined and quantified using the high-fidelity 3D models. In 60% of specimens, the saphenous nerve was found to have three branches in the leg, infrapatellar, anterior, and posterior. In 40% of specimens, the posterior branch was absent. Three landmarks were found to consistently localize the anterior branch: the medial border of tibia at the level of the tibial tuberosity, the medial border of tibia at the level of the mid-point of leg, and the mid-point of the anterior border of the medial malleolus. The posterior branch, when present, had variable branching patterns but did not extend as far distally as the medial malleolus in any specimen. Anatomically, the anterior and posterior branches at the level of the tibial tuberosity could be most advantageous for nerve stimulation due to their close proximity to the bifurcation of the saphenous nerve where the branches are larger and more readily localizable than distally. Additionally, the tibial tuberosity is a prominent landmark that can be easily identified in most individuals and could be used to localize the anterior and posterior branch using ultrasound or other imaging modalities. These findings will enable implementation of highly realistic computational models that can be used to simulate saphenous nerve stimulation using percutaneous and implanted devices.

Fatty infiltration of gastrocnemius-soleus muscle complex: Considerations for myosteatosis rehabilitation.

Although previous studies have reported fatty infiltration of the gastrocnemius-soleus complex, little is known about the volumetric distribution and patterns of fatty infiltration. The purpose of this anatomical study was to document and quantify the frequency, distribution, and pattern of fatty infiltration of the gastrocnemius-soleus complex. One hundred formalin-embalmed specimens (mean age 78.1 ± 12.3 years; 48F/52M) were serially dissected to document the frequency, distribution, and pattern of fatty infiltration in the medial and lateral heads of gastrocnemius and soleus muscles. Fatty infiltration was found in 23% of specimens, 13 unilaterally (8F/5M) and 10 (5M/5F) bilaterally. The fatty infiltration process was observed to begin medially from the medial aspect of the medial head of gastrocnemius and medial margin of soleus and then progressed laterally throughout the medial head of gastrocnemius and the marginal, anterior, and posterior soleus. The lateral head of gastrocnemius remained primarily muscular in all specimens. Microscopically, the pattern of infiltration was demonstrated as intramuscular with intact aponeuroses, and septa. The remaining endo-, peri-, and epimysium preserved the overall contour of the gastrocnemius-soleus complex, even in cases of significant fatty replacement. Since the external contour of the calf is preserved, the presence of fatty infiltration may be underdiagnosed in the clinic without imaging. Myosteatosis is associated with gait and balance challenges in the elderly, which can impact quality of life and result in increased risk of falling. The findings of the study have implications in the rehabilitation management of elderly patients with sarcopenia and myosteatosis.

Parasagittal needle placement approach for lumbar medial branch denervation: a brief technical report.

Radiofrequency denervation of lumbar medial branches is a viable treatment option to manage chronic facetogenic low back pain. Traditionally, lumbar medial branch denervation involves placement of the electrode's active tip at a 20-degree angulation away from the parasagittal plane. However, more recent anatomical studies have provided evidence supporting the feasibility of an alternative parasagittal approach targeting the posterior half of the lateral neck of the superior articular process to capture the lumbar medial branches. Currently, there is a lack of clinical data on the effectiveness of the alternative parasagittal needle placement technique. Therefore, in this brief technical report, the parasagittal needle placement technique and the pain relief outcomes in four consecutive patients following treatment with the parasagittal approach are described.

Quantification of needle angles for lumbar medial branch denervation targeting the posterior half of the superior articular process: an osteological study.

BACKGROUND: Lumbar medial branch radiofrequency ablation (RFA) is a common intervention to manage chronic axial low back pain originating from the facet joints. A more parasagittal approach targeting the posterior half of the lateral neck of superior articular process (SAP) was previously proposed. However, specific needle angles to achieve parallel placement at this target site have not been investigated. OBJECTIVE: To quantify and compare the needle angles, on posterior and lateral views, to achieve parallel placement of electrodes along the medial branch at the posterior half of the lateral neck of SAP at each lumbar vertebral level (L1-L5) and sacrum. DESIGN: Osteological Study. METHODS: Twelve disarticulated lumbosacral spines (n = 72 individual bones) were used in this study. Needles were placed along the periosteum of the posterior half of the lateral neck of SAP, bilaterally and photographed. Mean needle angles for each vertebral level (L1-L5) and sacrum were quantified, and statistical differences were analyzed. RESULTS: The posterior view provided the degrees of lateral displacement from the parasagittal plane (abduction angle), while the lateral view provided the degrees of declination (cranial-to-caudal angle) of the needle. Mean needle angles at each level varied, ranging from 5.63 ± 5.76° to 14.50 ± 14.24° (abduction angle, posterior view) and 40.17 ± 7.32° to 64.10 ± 9.73° (cranial-to-caudal angle, lateral view). In posterior view, a < 10-degree needle angle interval was most frequently identified (57.0% of needle placements). In lateral view, the 40-50-degree (L1-L2), 50-60-degree (L3-L5), and 60-70-degree (sacrum) needle angle intervals occurred most frequently (54.2%, 50.0%, and 41.7% of needle placements, respectively). CONCLUSIONS: Targeting the posterior half of the lateral neck of SAP required <10-degree angulation from parasagittal plane in majority of cases. However, variability of needle angles suggests a standard "one-size-fits-all" approach may not be the optimal technique.

The 3D muscle morphology and intramuscular innervation of the digital bellies of flexor digitorum profundus: Clinical implications for botulinum toxin injection sites.

Spasticity of flexor digitorum profundus is frequently managed with botulinum toxin injections. Knowledge of the 3D morphology and intramuscular innervation of the digital bellies of flexor digitorum profundus is necessary to optimize the injections. The purpose of this study was to digitize and model in 3D the contractile and connective tissue elements of flexor digitorum profundus to determine muscle morphology, model and map the intramuscular innervation and propose sites for botulinum toxin injection. Fiber bundles (FBs)/aponeuroses and intramuscular nerve branches were dissected and digitized in 12 formalin embalmed cadaveric specimens. Cartesian coordinate data were reconstructed into 3D models as in situ to visualize and compare the muscle morphology and intramuscular innervation patterns of the bellies of flexor digitorum profundus. The 3rd, 4th and 5th digital bellies were superficial to the 2nd digital belly and located adjacent to each other in all specimens. Each digital belly had distinct intramuscular innervation patterns. The 2nd digital belly received intramuscular branches from the anterior interosseus nerve (AIN). The superior half of the 3rd digital belly was innervated intramuscularly by the ulnar nerve (n = 4) or by both the anterior interosseus and ulnar nerves (n = 1). The inferior half of the belly received dual innervation from the anterior interosseus and ulnar nerves in 2 specimens, or exclusively from the AIN (n = 2) or the ulnar nerve (n = 1). The 4th digital belly was innervated by intramuscular branches of the ulnar nerve. One main branch, after coursing through the 4th digital belly, entered the lateral aspect of the 5th digital belly and arborized intramuscularly. The morphology of the FBs, aponeuroses and intramuscular innervation of the digital bellies of FDP were mapped and modelled volumetrically in 3D as in situ. Previous studies were not volumetric nor identified the course of the intramuscular nerve branches within each digital belly. Based on the intramuscular innervation of each of the digital bellies, one possible optimized botulinum toxin injection location was proposed. This injection location, at the junction of the superior and middle thirds of the forearm, would be located in dense nerve terminal zones of the anterior interosseus and ulnar nerves. Future anatomical and clinical investigations are necessary to evaluate the efficacy of these anatomical findings in the management of spasticity.

Standardizing nomenclature in regional anesthesia: an ASRA-ESRA Delphi consensus study of upper and lower limb nerve blocks.

BACKGROUND: Inconsistent nomenclature and anatomical descriptions of regional anesthetic techniques hinder scientific communication and engender confusion; this in turn has implications for research, education and clinical implementation of regional anesthesia. Having produced standardized nomenclature for abdominal wall, paraspinal and chest wall regional anesthetic techniques, we aimed to similarly do so for upper and lower limb peripheral nerve blocks. METHODS: We performed a three-round Delphi international consensus study to generate standardized names and anatomical descriptions of upper and lower limb regional anesthetic techniques. A long list of names and anatomical description of blocks of upper and lower extremities was produced by the members of the steering committee. Subsequently, two rounds of anonymized voting and commenting were followed by a third virtual round table to secure consensus for items that remained outstanding after the first and second rounds. As with previous methodology, strong consensus was defined as ≥75% agreement and weak consensus as 50%-74% agreement. RESULTS: A total of 94, 91 and 65 collaborators participated in the first, second and third rounds, respectively. We achieved strong consensus for 38 names and 33 anatomical descriptions, and weak consensus for five anatomical descriptions. We agreed on a template for naming peripheral nerve blocks based on the name of the nerve and the anatomical location of the blockade and identified several areas for future research. CONCLUSIONS: We achieved consensus on nomenclature and anatomical descriptions of regional anesthetic techniques for upper and lower limb nerve blocks, and recommend using this framework in clinical and academic practice. This should improve research, teaching and learning of regional anesthesia to eventually improve patient care.

Enhancing the selective electrical activation of human vagal nerve fibers: a comparative computational modeling study with validation in a rat sciatic model.

Objective.Vagus nerve stimulation (VNS) is an emerging treatment option for a myriad of medical disorders, where the method of delivering electrical pulses can vary depending on the clinical indication. In this study, we investigated the relative effectiveness of electrically activating the cervical vagus nerve among three different approaches: nerve cuff electrode stimulation (NCES), transcutaneous electrical nerve stimulation (TENS), and enhanced TENS (eTENS). The objectives were to characterize factors that influenced nerve activation and to compare the nerve recruitment properties as a function of nerve fiber diameter.Methods.The Finite Element Model, based on data from the Visible Human Project, was implemented in COMSOL. The three simulation types were compared under a range of vertical and horizontal displacements relative to the location of the vagus nerve. Monopolar anodic stimulation was examined, along with latency and activation of different fiber sizes. Nerve activation was determined via the activating function and McIntyre-Richardson-Grill models, and activation thresholds were validated in anin-vivorodent model.Results.While NCES produced the lowest activation thresholds, eTENS generally performed superior to TENS under the range of conditions and fiber diameters, producing activation thresholds up to three times lower than TENS. eTENS also preserved its enhancement when surface electrodes were displaced away from the nerve. Anodic stimulation revealed an inhibitory region that removed eTENS benefits. eTENS also outperformed TENS by up to four times when targeting smaller diameter nerve fibers, scaling similar to a cuff electrode. In latency and activation of smaller diameter nerve fibers, eTENS results resembled those of NCES more than a TENS electrode. Activation threshold ratios were consistent inin-vivovalidation.Significance.Our findings expand upon previously identified mechanisms for eTENS and further demonstrate how eTENS emulates a nerve cuff electrode to achieve lower activation thresholds. This work further characterizes considerations required for VNS under the three stimulation methods.

Innervation of thumb carpometacarpal joint: implications for diagnostic block and denervation procedures.

INTRODUCTION: Osteoarthritis (OA) of the thumb carpometacarpal (CMC) joint is a common disorder that negatively impacts hand function. Denervation of the thumb CMC joint has emerged as a viable treatment option. However, the innervation pattern of the thumb CMC joint is controversial. Therefore, the objective of this study was to identify the articular branches supplying the thumb CMC joint and to document their relationship to anatomical landmarks to provide the foundation for image-guided diagnostic block and denervation procedures. METHODS: In 10 formalin-embalmed upper limb specimens articular branches supplying the thumb CMC joint were dissected from their origin to termination. A frequency map documenting the number of articular branches was generated. The frequency map enabled visualization and comparison of the relative area of innervation of the thumb CMC joint by each articular branch. RESULTS: The thumb CMC joint received innervation from six nerves. These were the deep branch of ulnar nerve (DBUN), dorsal articular nerve (DAN) of the first interosseus space, thenar branch of median nerve (TBMN), palmar cutaneous branch of median nerve (PCBMN), lateral antebrachial cutaneous nerve (LACN) and superficial branch of the radial nerve (SBRN) and/or their branches. Each nerve was found to innervate different aspects of the joint. The DBUN and DAN were found to innervate the posteromedial aspect of the thumb CMC joint, the TBMN and PCBMN anterior/anteromedial aspects, LACN posterolateral/lateral/anterior aspects and SBRN posterolateral/anterolateral aspects. CONCLUSIONS: The thumb CMC joint was innervated by articular branches originating from the SBRN, DAN, LACN, PCBMN, TBMN and DBUN. The documented anatomical relationships provide the foundation to inform selective diagnostic block and denervation of the thumb CMC joint. Further investigations are needed to assess the clinical implications of the current study.

Gross and Applied Anatomy Pedagogical Approaches in Occupational Therapy Education: A Scoping Review.

Introduction. With technological advancements, anatomy teaching approaches in occupational therapy education have expanded. However, uncertainty remains regarding the approaches that best optimize academic and practice outcomes in student occupational therapists (OTs). Purpose. This scoping review mapped the pedagogical approaches used to teach musculoskeletal anatomy to student OTs. Methods. A scoping review was conducted, with a consultation exercise involving Canadian occupational therapy educators. Six databases were searched, with terms related to student OTs, anatomy, and education. Included articles were available in English, full text; featured empirical research of any study design and/or gray literature; featured a pedagogical approach used to teach anatomy; and targeted student OTs with the pedagogies. Results. Twenty-eight reports between 1978 and 2021 were included. Although technology-based pedagogies became more common with time, historically used pedagogies (e.g., lectures and labs) remained prominent and most common. Narrative synthesis regarding the effectiveness of anatomy pedagogical approaches identified five main factors: (a) anatomy competency; (b) teaching method diversity; (c) learner psychological considerations; (d) interprofessional education; and (e) optimal academic outcomes. Implications. This review demonstrates the importance of anatomy knowledge to occupational therapy education and practice. A diversity of pedagogical approaches, with and without technology, may foster better outcomes by addressing diverse learning needs.

Extra- and intramuscular innervation of the masseter: Implications for facial reanimation.

PURPOSE: Irreversible facial paralysis results in significant functional impairment. The motor nerve to the masseter is a reconstructive option, but despite its clinical importance, there are few parametric anatomic studies of the masseteric nerve. The purpose of this study was to investigate the extra- and intramuscular innervation of the masseter in 3D to determine the relationship of the nerve to the muscle heads and identify landmarks to aid identification. MATERIALS AND METHODS: The nerve was dissected throughout its entire course in eight formalin-embalmed cadaveric specimens (mean age 84.9 ± 12.2 years). The nerve was digitized at 1-2 mm intervals using a MicroScribe™ digitizer and modeled in 3D in Autodesk® Maya®. RESULTS: Two or three extramuscular nerves were found to enter the deep head (DH) of the masseter: one main "primary" nerve (n = 8) and one (n = 4) or two (n = 4) smaller primary nerve(s). The main primary nerve supplied both the deep and superficial heads, whereas the smaller primary nerve(s) only supplied the DH. Surgical landmarks for masseter nerve localization were quantified. CONCLUSIONS: Comprehensive mapping of the innervation of the masseter muscle throughout its volume revealed neural partitioning that could provide a basis for safety planning for muscle flaps and donor nerve identification and explain why masseter functional loss is not incurred by donor nerve sacrifice. Quantified landmarks correlate to previous studies and support the constant anatomy of this nerve. Our results provide a basis to optimize surgical approaches for donor nerve and muscle flap surgery.

Dissection, digitization, and three-dimensional modelling: a high-fidelity anatomical visualization and imaging technology.

Technological advances have enabled the development of a novel technique of dissection, digitization and three-dimensional modelling of skeletal muscle and other tissues including neurovascular structures as in situ over the last 25 years. Meticulous serial dissection followed by digitization is used to collect Cartesian coordinate data of the contractile and connective tissue elements throughout the entire muscle volume. The Cartesian coordinate can then be used to construct high-fidelity three-dimensional models that capture the spatial arrangement of the contractile and connective tissue elements as in situ enabling detailed studies of the arrangement of the fiber bundles and their attachment sites to aponeuroses, tendon, and bone. In the laboratory, we have concurrently developed a computational methodology to quantify architectural parameters, including fiber bundle length, pennation angle, volume, physiological cross-sectional area in three-dimensional space. In this paper, a flexor digitorum superficialis specimen will be used to demonstrate the high-fidelity outcomes of dissection, digitization, and three-dimensional modelling. This three-step methodology provides a unique opportunity to study muscle architecture in three dimensions, as in situ. Knowledge translation from the anatomy laboratory to the clinical setting has been highly successful.

Measuring Shear Wave Velocity in Adult Skeletal Muscle with Ultrasound 2-D Shear Wave Elastography: A Scoping Review.

Ultrasound 2-D shear wave elastography (US 2D-SWE) is a non-invasive, cost-effective tool for quantifying tissue stiffness. Amidst growing interest in US 2D-SWE for musculoskeletal research, it has been recommended that shear wave velocity (SWV) should be reported instead of elastic moduli to avoid introducing unwanted error into the data. This scoping review examined the evolving use of US 2D-SWE to measure SWV in skeletal muscle and identified strengths and weaknesses to guide future research. We searched electronic databases and key review reference lists to identify articles published between January 2000 and May 2021. Two reviewers assessed the eligibility of records during title/abstract and full-text screening, and one reviewer extracted and coded the data. Sixty-six studies met the eligibility criteria, of which 58 were published in 2017 or later. We found a striking lack of consensus regarding the effects of age and sex on skeletal muscle SWV, and widely variable reliability values. Substantial differences in methodology between studies suggest a pressing need for developing standardized, validated scanning protocols. This scoping review illustrates the breadth of application for US 2D-SWE in musculoskeletal research, and the data synthesis exposed several notable inconsistencies and gaps in current literature that warrant consideration in future studies.

Intramuscular aponeuroses and fiber bundle morphology of the five bellies of flexor digitorum superficialis: A three-dimensional modeling study.

Restoring balanced function of the five bellies of flexor digitorum superficialis (FDS) following injury requires knowledge of the muscle architecture and the arrangement of the contractile and connective tissue elements. No three-dimensional (3D) studies of FDS architecture were found in the literature. The purpose was to (1) digitize/model in 3D the contractile/connective tissue elements of FDS, (2) quantify/compare architectural parameters of the bellies and (3) assess functional implications. The fiber bundles (FBs)/aponeuroses of the bellies of FDS were dissected and digitized (MicroScribe® Digitizer) in 10 embalmed specimens. Data were used to construct 3D models of FDS to determine/compare the morphology of each digital belly and quantify architectural parameters to assess functional implications. FDS consists of five morphologically and architecturally distinct bellies, a proximal belly, and four digital bellies. FBs of each belly have unique attachment sites to one or more of the three aponeuroses (proximal/distal/median). The proximal belly is connected through the median aponeurosis to the bellies of the second and fifth digits. The third belly exhibited the longest mean FB length (72.84 ± 16.26 mm) and the proximal belly the shortest (30.49 ± 6.45 mm). The third belly also had the greatest mean physiological cross-sectional area, followed by proximal/second/fourth/fifth. Each belly was found to have distinct excursion and force-generating capabilities based on their 3D morphology and architectural parameters. Results of this study provide the basis for the development of in vivo ultrasound protocols to study activation patterns of FDS during functional activities in normal and pathologic states.

Quantification of Needle Angles for Traditional Lumbar Medial Branch Radiofrequency Ablation: An Osteological Study.

BACKGROUND: Clinical outcomes following lumbar medial branch radiofrequency ablation (RFA) have been inconsistent. One possible reason is less-than-optimal placement of the electrode along the medial branch at the lateral neck of superior articular process (SAP). Needle angles that define optimal placement (i.e., parallel to the medial branch) may be helpful for consistent technical performance of RFA. Despite its importance, there is a lack of anatomical studies that quantify RFA needle placement angles. OBJECTIVE: To quantify and compare needle angles to achieve parallel placement along the medial branch as it courses on the middle two-quarters of the lateral neck of the SAP at the L1-L5 vertebrae. DESIGN: Osteological Study. METHODS: Ten lumbar vertebral columns were used in this study. Needles were placed along the periosteum of the middle two-quarters of the lateral neck of SAP. Mean needle angles for L1-L5 were quantified and compared using posterior (n = 100) and lateral (n = 100) photographs. RESULTS: Mean needle angles varied ranging from 29.29 ± 17.82° to 47.22 ± 16.27° lateral to the parasagittal plane (posterior view) and 33.53 ± 10.23° to 49.19 ± 10.69° caudal to the superior vertebral endplate (lateral view). Significant differences in mean angles were found between: L1/L3 (P = .008), L1/L4 (P = .003), and L1/L5 (P = .040) in the posterior view and L1/L3 (P = .042), L1/L4 (P < .001), L1/L5 (P < .001), L2/L4 (P = .004), and L2/L5 (P = .004) in lateral view. CONCLUSIONS: Variability of needle angles suggest a standard "one-size-fits-all" approach may not be the optimal technique. Future research is necessary to determine optimal patient-specific needle angles from a more detailed and granular analysis of fluoroscopic landmarks.

Anatomical Study of the Innervation of Triangular Fibrocartilage Complex and Distal Radioulnar and Radiocarpal Joints: Implications for Denervation.

PURPOSE: Open and percutaneous denervation is an emerging technique for joint pain. This study investigated the course and distribution of the articular branches innervating the triangular fibrocartilage complex (TFCC), distal radioulnar joint (DRUJ), and radiocarpal joint (RCJ) relative to bony and soft tissue landmarks to guide wrist denervation procedures. METHODS: Fourteen formalin-embalmed specimens were serially dissected to expose the origin, course, and distribution of articular branches innervating the TFCC, DRUJ, and RCJ. Bony and soft tissue landmarks to localize each articular branch were documented and visualized on a 3-dimensional reconstruction of the bones of the distal forearm and hand. RESULTS: The TFCC was innervated by articular branches from the posterior interosseus nerve (10 of 14 specimens), dorsal cutaneous branch of the ulnar nerve (14 of 14 specimens), palmar cutaneous branch of the ulnar nerve (12 of 14 specimens), and medial antebrachial cutaneous nerve (9 of 14 specimens). The DRUJ was innervated by the posterior interosseus nerve (9 of 14 specimens) and anterior interosseus nerve (14 of 14 specimens). The RCJ was innervated by the posterior interosseus nerve (14 of 14 specimens), superficial branch of the radial nerve (5 of 14 specimens), lateral antebrachial cutaneous nerve (14 of 14 specimens), and palmar cutaneous branch of the median nerve (10 of 14 specimens). CONCLUSIONS: Multiple nerves were found to innervate the TFCC, DRUJ, and RCJ. The relationship of anatomical landmarks to specific articular branches supplying the TFCC, DRUJ, and RCJ can inform selective denervation procedures based on the structural origin of pain. CLINICAL RELEVANCE: The detailed documentation of the spatial relationship of the nerve supply to the wrist provides clinicians with the anatomical basis to optimize current, and develop new denervation protocols to manage chronic wrist pain.

Gross and applied anatomy pedagogical approaches in occupational therapy education: protocol for a scoping review.

INTRODUCTION: Historically, dissection is considered the 'gold standard' for teaching foundational anatomy to student occupational therapists. However, many programmes no longer have access to gross anatomy laboratory resources, as it is considered too costly. To address this limitation, applied anatomy instructors have developed innovative novel approaches to teach gross and applied anatomy to student occupational therapists, including live/surface anatomy, medical imaging, and more recently, computer-aided instruction. The types of different anatomy pedagogical approaches used and their impact on learning outcomes in occupational therapy education are unclear. The purpose of this scoping review is to map the types of musculoskeletal gross and applied anatomy pedagogical approaches used in occupational therapy curricula. METHODS AND ANALYSIS: Using Arksey and O'Malley's (2005) six-stage scoping review framework, approximately 304 different search combinations will be searched across five electronic library databases (ie, MEDLINE, Embase, CINAHL, AMED and ERIC) from their inception to December 2021, in addition to conducting consultation exercises with relevant stakeholders. After title/abstract and full-text screening, included articles will be charted, collated and summarised. ETHICS AND DISSEMINATION: This study will not involve human or animal subjects. Therefore, research ethics approval is not required. The proposed scoping review will help the research, institutional and clinical rehabilitation communities to better understand the types of musculoskeletal gross and applied anatomy pedagogical approaches used to foster, build and promote musculoskeletal foundational knowledge in occupational therapy education. This could potentially inform the future physical medicine course curricula in occupational therapy programmes. The findings of this review will be disseminated to occupational therapy instructors, occupational therapists, researchers and organisations offering occupational therapy programmes (eg, Universities).