ABSTRACT
Grayscale lithography (GSL) is an alternative approach to the standard binary lithography in MEMS fabrication, enabling the fabrication of complicated, arbitrary 3D structures on a wafer without the need for multiple masks and exposure steps. Despite its advantages, GSL's effectiveness is highly dependent on controlled lab conditions, equipment consistency, and finely tuned photoresist (PR) exposure and etching processes. This works presents a thorough investigation of the challenges of GSL for silicon (Si) wafers and presents a detailed approach on how to minimize fabrication inaccuracies, aiming to replicate the intended design as closely as possible. Utilizing a maskless laser writer, all aspects of the GSL are analyzed, from photoresist exposure parameters to Si etching conditions. A practical application of GSL is demonstrated in the fabrication of 4-µm-deep f#/1 Si Fresnel lenses for long-wave infrared (LWIR) imaging (8-12 µm). The surface topography of a Fresnel lens is a good case to apply GSL, as it has varying shapes and size features that need to be preserved. The final fabricated lens profiles show a good match with the initial design, and demonstrate successful etching of coarse and fine features, and demonstrative images taken with an LWIR camera.
ABSTRACT
Being able to image the microstructure of growth cartilage is important for understanding the onset and progression of diseases such as osteochondrosis and osteoarthritis, as well as for developing new treatments and implants. Studies of cartilage using conventional optical brightfield microscopy rely heavily on histological staining, where the added chemicals provide tissue-specific colours. Other microscopy contrast mechanisms include polarization, phase- and scattering contrast, enabling non-stained or 'label-free' imaging that significantly simplifies the sample preparation, thereby also reducing the risk of artefacts. Traditional high-performance microscopes tend to be both bulky and expensive.Computational imagingdenotes a range of techniques where computers with dedicated algorithms are used as an integral part of the image formation process. Computational imaging offers many advantages like 3D measurements, aberration correction and quantitative phase contrast, often combined with comparably cheap and compact hardware. X-ray microscopy is also progressing rapidly, in certain ways trailing the development of optical microscopy. In this study, we first briefly review the structures of growth cartilage and relevant microscopy characterization techniques, with an emphasis on Fourier ptychographic microscopy (FPM) and advanced x-ray microscopies. We next demonstrate with our own results computational imaging through FPM and compare the images with hematoxylin eosin and saffron (HES)-stained histology. Zernike phase contrast, and the nonlinear optical microscopy techniques of second harmonic generation (SHG) and two-photon excitation fluorescence (TPEF) are explored. Furthermore, X-ray attenuation-, phase- and diffraction-contrast computed tomography (CT) images of the very same sample are presented for comparisons. Future perspectives on the links to artificial intelligence, dynamic studies andin vivopossibilities conclude the article.
Subject(s)
Algorithms , Imaging, Three-Dimensional , Microscopy , Imaging, Three-Dimensional/methods , Humans , Microscopy/methods , Animals , Image Processing, Computer-Assisted/methods , Multimodal Imaging/methods , Fourier AnalysisABSTRACT
The integration of trivalent europium ion (Eu3+)-doped zinc molybdate (ZnMoO4) as red phosphors in next-generation solid-state lighting (SSL) is impeded by their extended electron lifetime and suboptimal thermal stability. To overcome these limitations, we propose a co-doping approach by incorporating Mn2+ and Eu3+ in ZnMoO4, aiming to improve thermal reversibility and reduce the lifetime of electron transitions. A series of Eu3+-doped ZnMoO4 and Mn2+/Eu3+-co-doped ZnMoO4 phosphor materials were synthesized via the conventional sol-gel method, and their photoluminescence properties were compared under high-temperature conditions. Experimental results indicate that the introduction of Mn2+ into Eu3+-doped ZnMoO4 leads to a decrease in quantum efficiency and electron lifetime, primarily attributed to defects within the crystal lattice and energy transfer from Eu3+ to Mn2+, resulting in enhanced non-radiative transitions. However, the addition of a small quantity of Mn2+ remarkably improves the thermal stability and reversibility of the phosphors. Consequently, this co-doping strategy presents a promising avenue for expanding the application possibilities of phosphor materials, particularly for high-power SSL applications subjected to elevated temperatures. Hence, Eu3+-only doped samples are well-suited for lighting applications due to their high IQE and excellent thermal stability. Conversely, Eu3+/Mn2+-co-doped samples show promise in applications that require a shorter electron lifetime and good reversibility.
ABSTRACT
In this study, a series of trivalent europium-doped tungstate and molybdate samples were synthesized using an improved sol-gel and high-temperature solid-state reaction method. The samples had different W/Mo ratios and were calcined at various temperatures ranging from 800 to 1000 °C. The effects of these variables on the crystal structure and photoluminescence characteristics of the samples were investigated. It was found that a doping concentration of 50% for europium yielded the best quantum efficiency based on previous research. The crystal structures were found to be dependent on the W/Mo ratio and calcination temperature. Samples with x ≤ 0.5 had a monoclinic lattice structure that did not change with calcination temperature. Samples with x > 0.75 had a tetragonal structure that remained unchanged with calcination temperature. However, samples with x = 0.75 had their crystal structure solely dependent on the calcination temperature. At 800-900 °C, the crystal structure was tetragonal, while at 1000 °C, it was monoclinic. Photoluminescence behavior was found to correlate with crystal structure and grain size. The tetragonal structure had significantly higher internal quantum efficiency than the monoclinic structure, and smaller grain size had higher internal quantum efficiency than larger grain size. External quantum efficiency initially increased with increasing grain size and then decreased. The highest external quantum efficiency was observed at a calcination temperature of 900 °C. These findings provide insight into the factors affecting the crystal structure and photoluminescence behavior in trivalent europium-doped tungstate and molybdate systems.
ABSTRACT
In this study, we developed a technology for broadening the 465 nm and 535 nm excitation peaks of Eu3+:Y2(MoO4)3 via crystal lattice orderly arrangement. This was achieved by powder particle aggregation and diffusion at a high temperature to form a ceramic structure. The powdered Eu3+:Y2(MoO4)3 was synthesized using the combination of a sol-gel process and the high-temperature solid-state reaction method, and it then became ceramic via a sintering process. Compared with the Eu3+:Y2(MoO4)3 powder, the full width at half maximum (FWHM) of the excitation peak of the ceramic was broadened by two- to three-fold. In addition, the absorption efficiency of the ceramic was increased from 15% to 70%, while the internal quantum efficiency reduced slightly from 95% to 90%, and the external quantum efficiency was enhanced from 20% to 61%. More interestingly, the Eu3+:Y2(MoO4)3 ceramic material showed little thermal quenching below a temperature of 473 K, making it useful for high-lumen output operating at a high temperature.
ABSTRACT
For uncooled infrared cameras based on microbolometers, silicon caps are often utilized to maintain a vacuum inside the packaged bolometer array. To reduce Fresnel reflection losses, anti-reflection coatings are typically applied on both sides of the silicon caps.This work investigates whether black silicon may be used as an alternative to conventional anti-reflective coatings. Reactive ion etching was used to etch the black silicon layer and deep cavities in silicon. The effects of the processed surfaces on optical transmission and image quality were investigated in detail by Fourier transform infrared spectroscopy and with modulated transfer function measurements. The results show that the etched surfaces enable similar transmission to the state-of-the-artanti-reflection coatings in the 8-12 µm range and possibly obtain wider bandwidth transmission up to 24 µm. No degradation in image quality was found when using the processed wafers as windows. These results show that black silicon can be used as an effective anti-reflection layer on silicon caps used in the vacuum packaging of microbolometer arrays.
ABSTRACT
Polarization-sensitive Fourier-ptychography microscopy (pFPM) allows for high resolution imaging while maintaining a large field of view, and without mechanical movements of optical-setup components. In contrast to ordinary light microscopes, pFPM provides quantitative absorption and phase information, for complex and birefringent specimens, with high resolution across a wide field of view. Using a semi-spherical home-built LED illumination array, a single polarizer, and a 10x /0.28NA objective, we experimentally demonstrate high performance pFPM with a synthesized NA of 1.1. Applying the standard quantitative method, a measured half-pitch resolution of 244 nm is achieved for the 1951 USAF resolution test target. As application examples, the polarimetric properties of a herbaceous flowering plant and the metastatic carcinoma of human liver cells are analyzed and quantitatively imaged.
Subject(s)
Lighting , Optical Devices , Humans , Microscopy, PolarizationABSTRACT
Plasmon-enhanced harvesting of photons has contributed to the photochemical conversion and storage of solar energy. However, high dependence on noble metals and weak coupling in heterostructures constrain the progress towards sustainable plasmonic enhancement. Here earth-abundant Ti is studied to achieve the plasmonic enhancement of catalytic activity in a solar-driven heterostructure Ti/TiO2-x. The heterostructure was fabricated by engineering an intense coupling of a surface-etched Ti metal and a gradient-based TiO2-x dielectric via diffusion doping. Ti/TiO2-x exhibits a highly resonant light absorption band associated with surface plasmon resonances that exhibit strong near-field enhancement (NFE) and hot electron injection effects. In a photoelectrochemical system, intense interaction of the resonant plasmons with a vicinal TiO2-x dielectric accelerates the transfer of solar energy to charge carriers for plasmon-enhanced water splitting reactions. Moreover, the plasmonic Ti/TiO2-x structure presents sustained enhanced redox activities over 100 h. The intense coupling by gradient doping offers an effective approach to enable the plasmon resonances of Ti excited by visible light. The Ti-based plasmonic heterostructure potentially opens an alternative avenue towards sustainable plasmon-enhanced catalysis.
ABSTRACT
Purpose: To examine, in Norwegian adolescents, to what degree emmetropia and low hyperopia were maintained from 16 to 18 years of age, and if this was the case, whether it was associated with continued coordinated ocular growth. Methods: Cycloplegic autorefraction and ocular biometry, including crystalline lens thickness, were measured in 93 Norwegian adolescents (mean age: 16.7 ± 0.3 years; 63.4% females) and repeated after 2 years. Crystalline lens power was determined by ray tracing over a 1-mm pupil, based on the Gullstrand-Emsley model. Serum vitamin D3 concentration was measured at follow-up. Results: Emmetropia and low hyperopia (-0.50 diopters [D] < spherical equivalent refractive error [SER] < +2.00 D) were present in 91.4% at baseline and 89.2% at follow-up. The emmetropes and low hyperopes who maintained their refractive error exhibited continued ocular axial growth (+0.059 ± 0.070 mm) together with a decrease in crystalline lens power (-0.064 ± 0.291 D) and a deepening of the anterior chamber (+0.028 ± 0.040 mm). Thinning of the crystalline lens was found in 24%. Overall, the negative change in SER was larger in those with the most negative SER at baseline (R2 = 0.178, P < 0.001), and was associated with increases in vitreous chamber depth and in crystalline lens power (R2 = 0.752, P < 0.001), when adjusted for sex. There was no difference in vitamin D3 level between those who exhibited negative versus positive changes in refractive error. Conclusions: The results show that emmetropic and low hyperopic eyes were still growing in late adolescence, with refractive errors being maintained through a coordinated decrease in crystalline lens power.
Subject(s)
Emmetropia/physiology , Eye/growth & development , Adolescent , Cross-Sectional Studies , Female , Humans , Hyperopia/epidemiology , Male , Norway/epidemiology , PrevalenceABSTRACT
WWe report a modeling framework for evaluating the performance of piezoelectrically actuated MEMS tunable lenses. It models the static opto-electromechanical coupling for symmetric configurations of piezoelectric actuators based on the laminated-plate theory, linear piezoelectricity, and ray tracing. With these assumptions, it helps to find geometrical parameters for actuators on clamped square or circular diaphragms that give a diffraction-limited tunable lens with minimum F-number. The tunable lens' optical performance and its focusing capability, alone and in combination with a paraxial fixed lens, were calculated in terms of object distance and actuation voltage. Using the modeling framework, we confirmed that the modulation transfer function for objects located at different distances remains the same after voltage adjustment.
ABSTRACT
Speckle is the main obstacle for the use of laser light sources in projection technology. This paper focuses on speckle suppression by the reduction of temporal coherence which is provided by the broadband laser light. The investigation of the effect of laser spectrum width and multiple lasers on speckle contrast is discussed. A broader spectrum width of the laser light is attained by the use of multiple semiconductor laser diodes of the broad area type. Measurements of speckle contrast with and without angle diversity are performed for two and four laser diodes. The measurement of speckle contrast for a single laser diode is also presented for comparison. The experimental results show that multiple laser diodes provide lower speckle contrast as compared to a single laser diode. In addition, it is also shown in this paper that the wavelength distribution of independent laser diodes has an effect on speckle contrast. Two different types of blue laser diodes, Nichia NUB802T and Nichia NUB801E, which have slightly different central wavelengths, were used for the measurements. Four laser diodes with a combination of two types of laser diodes offer better speckle contrast reduction than four laser diodes of the same type due to an effective broader spectrum. Additional speckle contrast reduction is achieved through the angle diversity by using a dynamic deformable mirror.
ABSTRACT
Despite of much effort and significant progress in recent years, speckle removal is still a challenge for laser projection technology. In this paper, speckle reduction by dynamic deformable mirror was investigated. Time varying independent speckle patterns were generated due to the angle diversity introduced by the dynamic mirror, and these speckle patterns were averaged out by the camera or human eyes, thus reducing speckle contrast in the final image. The speckle reduction by the wavelength diversity of the lasers was also studied. Both broadband lasers and narrowband laser were used for experiment. It is experimentally shown that speckle suppression can be attained by the widening of the spectrum of the lasers. Lower speckle contrast reduction was attained by the wavelength diversity for narrowband laser compared to the broadband lasers. This method of speckle reduction is suitable in laser projectors for wide screen applications where high power laser illumination is needed.
ABSTRACT
Speckle suppression in projection displays with a laser light source can be achieved by imaging a changing diffuser with random phase cells onto the screen. Theoretical expressions for the speckle contrast in this method have been earlier obtained in the case when different realizations of the phase diffuser produced statistically independent patterns of the light field on the screen. In the present paper, these expressions are generalized in the case when different realizations of the phase diffuser produce partly correlated speckle patterns. The possible structure of a motionless changing diffuser is presented. It includes a dynamic diffractive optical element (DDOE) and a light homogenizer. The DDOE can be based on the electrically controlled spatial light modulator (SLM) with a deformable polymer layer. This type of SLM can handle high light power and, therefore, can be used in projection displays with powerful laser beams.
ABSTRACT
We propose using a two-level (-1 and +1 as variables) orthogonal array (OA) to generate a binary phase diffuser for speckle reduction in laser projection displays. Compared with the Hadamard matrix, the diffuser generated from OA is more flexible. The speckle contrast ratio (CR) when introducing the binary phase diffuser at an intermediate image plane within the projector is calculated, and the minimum speckle CR can be achieved by finite step change of the diffuser patterns. With Kronecker algebra, the two-dimensional diffuser can also be replaced by two one-dimensional diffusers with the same function, and it can be implemented into the laser projector electronically and easily.
ABSTRACT
The design of a dual-field-of-view telescope for an 8-12-microm imaging waveband is described. Preliminary calculations are made to determine the first-order parameters of the narrow- and the wide-field modes. To achieve a switchable dual-field-of-view system, one use an optical configuration based on the axial motion of a single lens group along the optical axis. The same lens is also used for focusing at near objects and for athermalization by small axial movement. A total of six lenses with one conic surface are used in the design, making the telescope cost effective and lightweight. The final optical design is presented, along with the aberrations curves and modulation transfer function plots, showing excellent performance in both fields of view.