ABSTRACT
BACKGROUND This systematic review of the literature aimed to identify published studies and evaluate them on the quality of root canal fillings (RCF) and procedural errors with rotary systems for in vivo studies prepared for different clinical settings. MATERIAL AND METHODS A full literature exploration was conducted in Clarivate Analytics' Web of Science, Elsevier's Scopus, Embase, and PubMed for studies published between January 2020 and March 2024. A manual search was also performed by reviewing the references of selected papers. The following keywords were used: quality of root canal filling(s) OR quality of root canal obturation, root canal obturation OR endodontic treatment, clinical setting (academic, private, governmental), AND/OR procedural errors and rotary instrumentation. RESULTS Sixteen clinical studies were included in this review. The acceptance percentages for obturation length, density, and taper were 76.3%, 74.7%, and 82.5%, respectively, indicating significantly high, good ratios. The overall RCF recorded showed that 68.2% of root canal obturations were considered acceptable. Acceptable rates remained higher than unacceptable rates in academic, hospital, and private settings, and percentages ranged from 65.2% to 93.0%. Only 5 studies reported procedural errors, namely, ledge formation, separated instruments, apical perforation, transportation, lateral perforation, and root/foramen perforation. CONCLUSIONS Using rotary instruments for different root canal treatment steps as instrumentation and obturations is highly recommended. Among different clinical setting and practice, these instruments resulted in a good and acceptable RCF, overall quality performed by those instruments, and few procedural errors.
Subject(s)
Root Canal Obturation , Humans , Root Canal Obturation/methods , Root Canal Obturation/standards , Root Canal Obturation/instrumentation , Root Canal Preparation/instrumentation , Root Canal Preparation/methods , Root Canal Filling Materials/standards , Root Canal Therapy/instrumentation , Root Canal Therapy/methodsABSTRACT
BACKGROUND We used the 14-item Oral Health Impact Profile-14 (OHIP-14) questionnaire to evaluate the association between sociodemographic variables and oral health-related quality of life in 241 wearers of removable partial or complete dentures attending a single center in Yemen. MATERIAL AND METHODS A total of 241 partial dentures (PD) and complete dentures (CD) wearers were enrolled from the Department of Prosthodontics at the Faculty of Dentistry, Sana'a University, and the University of Science and Technology. Data were collected before the commencement of denture wearing and after 3-6 months of denture use. The questionnaire consisted of sociodemographic information and denture type, and another for the OHIP to assess oral health-related quality of life (OHRQoL), oral health impact profile scale comprises 7 subscales, each evaluating different aspects of oral health and functionality. Descriptive statistics were calculated for participants. Independent t tests were performed to compare different patient groups, focusing on PD and CD wearers. Paired-sample t tests were used to examine changes within patient groups before and after removable denture use. RESULTS Among all participants, 67.6% were male, wearers of CDs were 74.6% male, PDs were 58.3%, and was consistent for CD (71.0%) and PD (72.8%) wearers. The wearing prostheses significantly impacted the OHRQoL of patients using both PDs and CDs (P<0.01). Among CD wearers, 4 of these subscales (3-6) were statistically significant, but the handicaps subscale showed evident reductions in physical pain after treatment among PD wearers. CONCLUSIONS Wearing dentures positively affects the OHRQoL of patients, influencing various aspects of their health, including functional, physical, psychological, and social well-being.
Subject(s)
Oral Health , Quality of Life , Humans , Quality of Life/psychology , Male , Female , Cross-Sectional Studies , Middle Aged , Yemen , Surveys and Questionnaires , Aged , Denture, Partial, Removable/psychology , Denture, Complete/psychology , Adult , Dentures/psychologyABSTRACT
BACKGROUND Cephalometric radiography evaluates facial skeleton development and aids in diagnosis and treatment phases (pre and post) in orthodontics. This study aimed to compare digital cephalometric tracing using a smartphone application (App), a tablet-based platform, and manual tracing in 30 orthodontic patients. MATERIAL AND METHODS Thirty orthodontic pretreatment, criteria based, lateral cephalometric radiographs were analyzed/grouped for Steiner analysis parameters (5 skeletal, 3 dentals, 1 soft tissue) by 3 tracing methods [manual - group (Gp M), smartphone (Android - OS9) - Gp S, tablet (Apple - IOS13) - Gp T) after mandatory standardization/calibration. Measurements include 5 angular (SNA, SNB, ANB, SNMPA, SNOP), 3 linear U1NA, L1NB, U1L1, and 1 soft tissue (S line) (millimeters and degrees). Inter-examiner rating was determined using Dahlberg's test. After normality distribution testing (Shapiro-Wilk), data were analyzed using one-way analysis of variance (ANOVA) for group differences. Homogeneity of variance was verified using the Levene test. Differences were determined on probability value of (p≤0.05). RESULTS The results showed that Steiner's analysis parameters were similar in all groups with homogenous variances. Highest differences in mean values were found for L1NB, U1L1, and S line measurement, with higher values being observed in Gp S tracings. However, these differences were not statistically significant (p≤0.05). All parameters, irrespective of being measured in either degrees or millimeters, had means comparable to each other. CONCLUSIONS Smartphone and tablet-based applications produced tracings that were comparable and reliable when compared to conventional manual tracings. Standardization of images, processing, printing, and calibration of devices is important to achieve good results.
Subject(s)
Cephalometry , Mobile Applications , Smartphone , Humans , Cephalometry/methods , Male , Female , Adolescent , Computers, Handheld , Orthodontics/methodsABSTRACT
BACKGROUND The nasopalatine canal (NPC), or incisive canal, is located in the midline of the palate, posterior to the maxillary central incisors. Its anatomy is important in prosthetic dentistry procedures. This study aimed to assess the anatomical morphology of the NPC according to age, sex, and dental status using cone-beam computed tomography (CBCT) in 335 patients. MATERIAL AND METHODS In this retrospective cross-sectional study, a total of 335 patients were recruited and categorized according to sex, age, and dental status. Individual CBCT images were analyzed in the sagittal, coronal, and axial planes. Also, we recorded the dimensions and morphological shape of the NPC and adjacent buccal bone plate (BBP) under standardized conditions. The associations between sex, age group, NPC shapes and types, and presence of central incisors were assessed. A significance level was set at P<0.05. RESULTS Mean labio-palatal and mediolateral measurements of the incisive foramen were 5.13±1.45 mm and 3.21±0.96 mm, whereas the mean diameter of Stenson foramen was 2.57±1.25 mm, and the total length of the NPC was 11.79±2.50 mm. Funnel, Y, and round-shaped canals were the most prevalent shapes of the NPC in sagittal, coronal, and axial planes. BBP was greater in men, with P=0.011, P=0.000, and P=0.001 at BBP1, BBP2, and BBP3, respectively. CONCLUSIONS NPC and BBP parameter values were slightly higher among male patients. NPC parameters increased with older age. The crest width of BBP decreased with older age and after missing maxillary central incisor teeth.
Subject(s)
Cone-Beam Computed Tomography , Incisor , Palate , Humans , Cone-Beam Computed Tomography/methods , Male , Female , Adult , Middle Aged , Retrospective Studies , Palate/diagnostic imaging , Palate/anatomy & histology , Cross-Sectional Studies , Incisor/diagnostic imaging , Incisor/anatomy & histology , Adolescent , Maxilla/anatomy & histology , Maxilla/diagnostic imaging , AgedABSTRACT
Complex microbial communities have been reported to be involved in endodontic infections. The microorganisms invade the dental pulp leading to pulpitis and initiating pulp inflammation. Fusobacterium nucleatum is a dominant bacterium implicated in both primary and secondary endodontic infections. Drugs targeting the molecular machinery of F. nucleatum will minimize pulp infection. LpxA and LpxD are early acyltransferases involved in the formation of lipid A, a major component of bacterial membranes. The identification of leads which exhibit preference towards successive enzymes in a single pathway can also prevent the development of bacterial resistance. A stringent screening strategy utilizing physicochemical and pharmacokinetic parameters along with a virtual screening approach identified two compounds, Lomefloxacin and Enoxacin, with good binding affinity towards the early acyltransferases LpxA and LpxD. Lomefloxacin and Enoxacin, members of the fluoroquinolone antibiotic class, exhibit wide-ranging activity against diverse bacterial strains. Nevertheless, their effectiveness in the context of endodontic treatment requires further investigation. This study explored the potential of Lomefloxacin and Enoxacin to manage endodontic infections via computational analysis. Moreover, the compounds identified herein serve as a foundation for devising novel combinatorial libraries with enhanced efficacy for endodontic therapeutic strategies.
Subject(s)
Anti-Bacterial Agents , Fusobacterium nucleatum , Lipopolysaccharides , Fusobacterium nucleatum/drug effects , Fusobacterium nucleatum/metabolism , Humans , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Lipopolysaccharides/metabolism , Molecular Docking Simulation , Computer Simulation , Fusobacterium Infections/drug therapy , Fusobacterium Infections/microbiology , Enoxacin/pharmacology , Bacterial Proteins/metabolism , Pulpitis/drug therapy , Pulpitis/metabolism , Pulpitis/microbiologyABSTRACT
BACKGROUND The restoration of endodontically treated teeth (ETT) and severely damaged teeth has been a concern of clinicians. Glass Fiber Post (GFPs) combine the strength of carbon fiber posts with the esthetic appearance of glass to resemble natural dentin during dental restoration procedures. This radiographical study assessed the GFP carried out by students enrolled in the Clinical Comprehensive Course at the College of Dentistry, Jazan University. MATERIAL AND METHODS A total of 32 patients treated by 18 6th-year dental students with 121 GFPs were assessed in this cross-sectional radiographic study. The assessment covered tooth type, arch, post-to-root width, length of post in relation to the crown and root lengths, amount of remaining gutta percha (GP), and gap between GP and post. Data were analyzed using SPSS, and associations between variables were determined using the chi-square test. RESULTS Maxillary teeth were the most frequently restored with posts (88.4%) with most being (58.7%) anterior teeth, and 50.4% of posts had widths that were one-third that of the root. The percentage of posts was twice (71.1%) or equal to (26.4%) the crown length, whereas two-thirds of the tested GFPs were >5 mm of the remaining GP. Significant differences were observed in location and position of teeth with post width, post length in relation to crown or root length, and amount of remaining GP, with P values of 0.018, 0.000, and 0.001, respectively. CONCLUSIONS The assessed radiographs revealed that the performance of sixth year students in accomplishment GFP radiographically was satisfactory and within the values recommended in the literature.
Subject(s)
Post and Core Technique , Tooth Fractures , Humans , Saudi Arabia , Students, Dental , Universities , Cross-Sectional Studies , Glass , Dental Stress AnalysisABSTRACT
BACKGROUND Modification of the glass fiber post (GFP) with titanium dioxide or silver particles can improve the durability and reliability of dental treatments for ensuring long-term success. This research assessed the tensile bond strength (TBS) of an adhesive system used for cementing GFPs into root dentin following the incorporation of nanoparticles of titanium dioxide (NTiO2) and silver (NAg). MATERIAL AND METHODS Sixty human maxillary canines were prepared to create a 10-mm intra-radicular space for post placement from the cementoenamel junction. The specimens were randomly allocated into 2 groups (a non-thermocycling group and a thermocycling group). Each group was divided into 3 subgroups (10 samples each) according to the adhesive system used (adhesive system devoid of any addition, adhesive system including 1% NAg, and adhesive system infused with 1% NTiO2). TBS tests were conducted and recorded in MPa using a Universal Testing Machine, with an axial load applied at a rate of 0.5 mm/min until failure. The TBS for both groups (non-thermocycling and thermocycling) was measured in megapascals (MPa), and the failure type was recorded. The data were statistically analyzed using one-way analysis of variance (ANOVA) and Tukey's test with P.
Subject(s)
Adhesives , Dental Bonding , Glass , Titanium , Humans , Resin Cements/chemistry , Tensile Strength , Reproducibility of Results , Silver , Dentin , Materials TestingABSTRACT
BACKGROUND: Endocrowns (ECs) are alternatives for rebuilding severely damaged teeth and show superior efficacy in molars over premolars. OBJECTIVE: The objective of this in vitro study is to evaluate the effects of different preparation designs with short pulp chambers on the mean color change (Δâ¢E), fracture resistance, and failure types of mandibular molar ECs. METHOD: A total of 40 extracted mandibular molars were treated endodontically and divided into four groups. Samples in groups 1, 2, 3, and 4 had occlusal preparation depths of 5 mm, 3 mm, 3 mm with ferrule, and 3 mm with boxes, respectively. The samples were immersed in coffee and their Δâ¢E values were measured by using the Commission Internationale de l'Eclairage color system. They were also subjected to a fracture test. Next, all specimens were examined visually under a stereomicroscope to evaluate their failure modes and identify their fracture origins. Data were entered and analyzed by using Statistical Package for Social Sciences. RESULTS: Among all groups, group 4 (3 mm + boxes) presented the highest Δâ¢E (4.15) after immersion in coffee. Moreover, ANOVA revealed that the Δâ¢E of group 4 (occlusal preparation depth of 3 mm with boxes) was significantly different (p< 0.05) from that of group 2 (3 mm + ferrule, 3.07). The EC with a 3 mm chamfer and ferrule showed the highest maximum load of 2847.68 ± 693.27 N, whereas that with a 5 mm chamfer finish line had a marginally reduced load at fracture of 2831.52 ± 881.83 N. The EC with a 3 mm chamber and boxes had a slightly increased maximum load of 2700.75 ± 436.40 N, whereas that with the 3 mm chamber had the lowest maximum load at fracture of 2385.97 ± 465.61 N. One-way ANOVA showed that different EC preparation designs had no effect on maximum fracture load (F [3,16] = 0.550, p= 0.6). CONCLUSION: The recorded Δâ¢E values of ECs in all groups were equal or marginally higher than the acceptable values. The EC with a 3 mm chamfer and ferrule displayed the highest mean maximum load. The EC with a 5 mm chamfer finish line had a marginally lower maximum load at fracture than other ECs. Failures, such as ceramic fracture, split fracture, and ceramic and tooth splitting above the cemento-enamel junction (CEJ) or vertically were predominant in samples with occlusal preparation depths of 3 mm with ferrule and 5 mm.
Subject(s)
Molar , Humans , Color , Materials Testing/methods , Dental Stress Analysis , In Vitro Techniques , CrownsABSTRACT
BACKGROUND Material selection is crucial in restorative dentistry, influenced by aesthetics, material properties, and tooth location. This understanding is key for advancing dental practices and patient outcomes. The present study aimed to assess dentists' preferences for restorative materials in single-tooth crowns (SC) and how abutment tooth location and preparation margins influence these choices. MATERIAL AND METHODS A web-based pre-validated questionnaire survey was conducted among 811 actively practicing dentists in Saudi Arabia. RESULTS In posterior teeth, we found that ceramic was the most preferred material for SC regardless of the abutment tooth location and location of margins, followed by porcelain fused to metal (PFMs). In anterior teeth, ceramics were preferred, followed by CAD/CAM-based resin SC. Among the choice of ceramics in teeth for both supra-gingival margins, monolith zirconia was the most-preferred material for SC fabrication in posterior teeth, followed by zirconia-reinforced lithium silicate ceramic. Similarly, for sub-gingival margins, monolith zirconia crowns were the most popular option in posterior teeth among the respondents, with the highest in the mandibular molar region. In the anterior region, layered zirconia was the least preferred, and lithium disilicate ceramics was the most-favored option. A statistically significant difference existed between supra- and subgingival preparation for teeth 11 (P=0.01), 16 (P=0.03), and 34 (P=0.02). CONCLUSIONS Ceramic was the material of choice among Saudi dentists for replacement of SC, irrespective of the location and preparation margin. Monolith zirconia was usually selected for posterior teeth and lithium disilicate ceramics was the top choice in anterior teeth.
Subject(s)
Dental Porcelain , Tooth Crown , Zirconium , Humans , Saudi Arabia , Ceramics , Surveys and Questionnaires , Dentists , Materials TestingABSTRACT
Background: This simulated study of 30 severely curved L-shaped root canals aimed to compare preparation time, aberrations, width measurements, and fractured files of three nickel-titanium (Ni-Ti) files, namely, ProTaper, ProTaper Next (PTN), and WaveOne (WO). Methods: Thirty simulated L-curved root canals of resin blocks were randomly divided into three groups. The canals were prepared to a tip size of 25 using ProTaper, PTN, and WO rotary file systems. Pre- and post-operative views for each sample were captured by a professional camera at a standardized distance and position. Blue India ink was injected into the pre-operative canals, and red India ink was injected into the post-operative canals to give a clear superimposition image. Five points were assessed through the halfway of the canal to the orifice (area between the beginning of curvature and apical end point). Preparation time, aberrations, width measurements, and fractured files were recorded and analyzed. Results: Mean preparation time was longest in ProTaper (4.89±0.68 minutes). PTN and WO were the fastest in preparing the canals (about 3 minutes). A statistically significant difference was found between WO and ProTaper & PTN and ProTaper (p=0.000), while the difference was non-significant (p > 0.05) between WO and PTN. Nine aberrations consisting of three zips, one ledge and one outer widening were related to ProTaper, while WO recorded a ledge and fractured file, but for PTN system, it verified an outer widening and ledge. Only one WO file fractured, with no deformation observed in the other instruments. No significance was recorded among the width measurements in the different levels. Conclusion: ProTaper next achieved faster cutting than the ProTaper and WO file systems. PTN maintained the best apical termination position and produced the least canal aberration, followed by WO and ProTaper.
ABSTRACT
Telemedicine technologies allow distribution of health-related services and information and can include electronic and telecommunication technologies, remote patient and clinician contact, referral and prescribing, patient education, and monitoring. This systematic review aimed to evaluate publications on the perceptions and management of chronic medical conditions using telehealth remote consultations by primary healthcare professionals between April 2020 and December 2021 during the COVID-19 pandemic. Electronic databases, including Cinhal, PubMed, Science Direct, and ProQuest were searched to extract qualitative studies relevant to the topic. Inclusion criteria were developed based on the Population, Exposure, and Outcomes scoping framework. The target population was healthcare professionals working in primary care settings. Included studies encompassed various types of telemedicine, such as synchronous telemedicine, video conferencing, telephone conversations, and smart devices. Eight studies were included. Synchronous telemedicine was highly effective in ensuring the continuity of care and treatment, providing patients with convenience, improved access to treatment, and earlier disease management. Video conferencing and telephone consultations were the most common methods used. Challenges included concerns about patient privacy, technology literacy, and acceptance. Telemedicine was commended for its ability to provide access to immediate expert medical advice and eliminate the need for long-distance travel, contributing to increased patient compliance. Synchronous telemedicine is a promising solution for managing chronic conditions during and after the COVID-19 pandemic, offering benefits to patients and healthcare professionals. To maximize its potential, concerns regarding patient privacy, confidentiality, and technology literacy need to be addressed. Proper legislation and regulations are required for long-term success of telemedicine, making it a valuable component of healthcare systems.
Subject(s)
COVID-19 , Health Personnel , Pandemics , Primary Health Care , Remote Consultation , Telemedicine , Humans , COVID-19/epidemiology , COVID-19/therapy , Chronic Disease/therapy , Health Personnel/psychology , SARS-CoV-2 , Disease Management , VideoconferencingABSTRACT
Glass ionomer cement (GIC) is a self-adhesive dental restorative material composed of a polyacrylic acid liquid and fluoro-aluminosilicate glass powder. It is commonly used for cementation during dental restoration. This study aimed to systematically review the existing literature regarding the clinical performance of GIC in load-bearing dental restorations. A comprehensive literature search was conducted in EBSCO, PubMed, Embrace, and Cochrane databases. Only randomized controlled trials (RCTs) were included in the search, and a broad search technique was used, where inclusion and exclusion criteria were applied. After a thorough evaluation, 12 RCTs were extensively reviewed, and whether GIC is suitable for load-bearing restorations was determined. Significant variations in staining surface or margin, color match, translucency, esthetic anatomical form, retention, material fracture, marginal adaptation, surface luster, occlusal contour, wear, and approximal anatomical form indicated the unsuitability of GIC. By contrast, significance differences in patient view and periodontal response indicated that GIC is suitable. No significant differences in postoperative sensitivity, recurrence of caries, or tooth integrity were observed. Nevertheless, the results of the review demonstrated that the clinical performance of GIC is comparable to that of traditional restorative materials with regard to the parameters analyzed. GIC is a suitable restorative material for load-bearing restorations regarding surface margin, esthetic anatomical form, material retention and fracture, marginal adaptation, occlusal contour, wear, and approximal anatomical form. It reduces other parameters, such as postoperative sensitivity, recurrence of caries, and tooth integrity.
Subject(s)
Dental Restoration, Permanent , Glass Ionomer Cements , Humans , Glass Ionomer Cements/chemistry , Glass Ionomer Cements/therapeutic use , Dental Restoration, Permanent/methods , Randomized Controlled Trials as Topic , Dental Caries/therapyABSTRACT
BACKGROUND: Various studies have been conducted to analyze data via bibliometric analysis in different dentistry, including prosthetic dentistry. However, these studies evaluated the most cited published articles in dentistry. OBJECTIVE: To analyze and evaluate the characteristic development of several mesh keywords in the Journal of Prosthodontics - Implant, Esthetic, and Reconstructive Dentistry between 1992 and 2022. METHODS: The Scopus databases was searched to retrieve the data related to 8 categories, including published articles, most cited documents, authors and organizations, and maximum articles cited during the evaluation period. The data retrieved were exported to a Microsoft Excel sheet and were analyzed using the bibliometrix package. The data were first analyzed for ten years and then for 30 years. The highest of 10 were reported for each category, and co-authorship, reoccurrence, and linked data were also reported. RESULTS: 2603 published documents were recorded from the Scopus databases. Articles comprised 87.9% of the total published work, followed by review articles at 5.46%. The most productive decade was between 2013 and 2022. 3793 terms were used during the evaluation period, with the maximum number in 2003-2012 (2481). A total of 5392 keywords were used during 1992-2022, with the highest number (3232) from 2013 to 2022. A total of 6108 authors were acknowledged, with the maximum number (3964) from 2013 to 2022 and the fewest (767) from 1992 to 2002. Authors from different countries increased from 17 countries in 1992-2002 to 52 countries in 2013-2022 (total = 63 countries). Similarly, the number of organizations increased from 312 organizations in 1992-2002 to 1315 organizations in 2013-2022 (total = 1976 organizations). CONCLUSION: The current bibliometric analysis delivered a comprehensive overview about more spread research topics and its impactful role in contemporary dentistry, especially prosthetic dentistry.
Subject(s)
Dentistry , Prosthodontics , Bibliometrics , Esthetics , Periodicals as TopicABSTRACT
Preserving questionable maxillary teeth for aesthetics is challenging for many practitioners. This report presents the clinical and radiographic results of an orthodontic extrusion technique for clinical crown lengthening of female patients' maxillary teeth to increase the restorability of teeth. Splinting was carried out by using specially designed hucks cast with custom-made post joined with orthodontic brackets with adjusting teeth. Teeth were carefully extruded to the desired level without harming the marginal bone areas or root apices. Clinical follow-up evaluations were performed for 3 months before construction of the final prosthesis. Intra-oral radiographs showed normal periodontal contour consistent with new bone formation in the periapical area of all cases, with no evidence of root or crestal bone resorption or endodontic problems. This technique is highly recommended in the aesthetic area of the maxillary arch.
ABSTRACT
BACKGROUND Dentists frequently have work-related musculoskeletal disorder (MSD) diseases, which are the profession's second most common cause of disability. Awareness of dental ergonomics is necessary for controlling MSDs associated with dental workload. Dental professionals need additional training in dental ergonomics to reduce serious complications associated with dental workload. This questionnaire-based study aimed to evaluate the understanding of physical ergonomics and musculoskeletal disorders in 310 dental health professionals and students in Yemen. MATERIAL AND METHODS This was a cross-sectional study was conducted among 400 dental professionals working in various clinics and universities in Sana'a City, Yemen. They received a self-administered questionnaire that was developed from earlier studies. Five sections made up the questionnaire. The first section of the survey included questions about sex, age, and clinical professions; the second section focused on ergonomic awareness; the third section asked about work conditions; the fourth section asked about the prevalence of musculoskeletal disorders; and the fifth section asked about interventions used. Data were analyzed using SPSS version 25.0, and a P value of ≤0.05 was considered significant. RESULTS Only 310 questionnaires were completed. The participants'; level of understanding of ergonomics was low. One-way ANOVA showed a significant portion of respondents reported having MSDs, and they frequently reported pain related to workload. The neck, lower back, upper back, and shoulders experienced the highest levels of pain. CONCLUSIONS The prevalence of MSDs was high among dental professionals, especially in the lower back, upper back, and shoulder. This necessitates preventive measures like ergonomic positions, ergonomic equipment, regular exercise, and work breaks.
Subject(s)
Musculoskeletal Diseases , Occupational Diseases , Humans , Cross-Sectional Studies , Prevalence , Workload , Yemen/epidemiology , Musculoskeletal Diseases/epidemiology , Musculoskeletal Diseases/etiology , Musculoskeletal Diseases/prevention & control , Ergonomics , Pain , Surveys and Questionnaires , Occupational Diseases/epidemiology , Occupational Diseases/etiology , Occupational Diseases/prevention & control , Dentists , Risk FactorsABSTRACT
This systematic review aimed to identify and analyze in vitro studies on the marginal adaptation values of computer-aided-design/computer-aided-manufacturing (CAD/CAM) and heat-pressed lithium disilicate glass ceramics and zirconia-reinforced lithium silicates and endocrown restorations. A full literature search was conducted in Web of Science, PubMed/Medline, EMBASE, Scopus, Cochrane Library, Google Scholar, and ProQuest electronic databases. The following keywords: endocrown [(marginal adaption) or (marginal fit) or internal fitting)], endocrown [(molar(s)) or (premolar(s) or (posterior teeth) or (maxillary arch) or (mandibular arch)] and ceramic materials as [(lithium disilicate glass ceramic CAD/CAM) or (zirconia) or (heat-press)] were used. Articles were manually searched utilizing their reference lists. Study selection was restricted or limited to the time of publication but not to the type of tested teeth or ceramic material, endocrown design, system of endocrown construction, abutment scanning, and system of the marginal adaption measurement. A total of 17 in vitro studies published between 2016 and 2023 were included in this systemic review. Less than half of the studies were published during 2023. Most studies used lithium disilicate glass ceramic and zirconia-reinforced lithium silicate all-ceramic materials by CAD/CAM or heat-press systems. Marginal adaptation, or marginal gap, was almost equal in the 2 materials, while it was slightly or marginally higher in the heat-press than in the CAD/CAM system. All-ceramic lithium disilicate glass ceramic and/or zirconia endocrowns fabricated for posterior teeth in both arches using CAD/CAM or heat-press had recorded marginal adaptation values within an acceptable range.
Subject(s)
Ceramics , Lithium , Materials Testing , Dental Porcelain , Silicates , Dental Prosthesis DesignABSTRACT
Background: The symmetry between maxillary anterior teeth and the face holds significant importance. This study assessed and analyzed the relationship between facial parameters and anterior teeth in the maxillary arch of male and female subjects. Specifically, individual width and combined width (CW) measurements of the maxillary anterior teeth were investigated. Methods: This study involved a total of 150 dentate Yemeni subjects (74 men and 76 women), whose ages ranged from 18 years old to 30 years old. A maxillary cast was created, and two digital photographs of the face of each subject were taken and analyzed. Digital calipers and AutoCAD were used to gather measurement data of the dental parameters (intercanthal distance [ICD], interpupillary distance [IPD], interalar width [IAW], intercommissural width [ICW], and bizygomatic width [BZW]) and facial parameters (profile distance). Results: Significant correlations were found for the following: IPD and width of six maxillary anterior teeth of each of the study subjects; ICD and their central incisors; and BZW and their canine width measurements. In contrast, IAW and ICW were not correlated with all tooth measurements. Linear regression findings showed that the CW measurement of the four incisors was significantly correlated with all facial parameter measurements, excluding the ICW and IAW in females and the IAW, ICW, and profile distance in males. Conclusion: The IPD and ICD of males and females may be used to determine their CW measurements. The BZW and IPD of males can be used to take precise anthropological measurements of the width of the central canines and incisors. Meanwhile, the IPD distance of females can be used to assess the central and lateral incisor widths.
ABSTRACT
Occupational burnout is a chronic psychological problem affecting professionals. The aim of this study was to assess the types and categories of burnout among Saudi Dental board residents at different levels of residency in different provinces of Saudi Arabia, using the Copenhagen Burnout Inventory. Questionnaires were sent to 170 Saudi Dental board residents via Email and WhatsApp. at various training centers in Saudi Arabia, in May 2022. A part of the questionnaire covered the socio-demographic characteristics of the participants such as gender, training level or center, number of working sessions or hours per week and day, dental speciality, and marital status. The second part consisted of the Copenhagen Burnout Inventory survey with 21 questions. Only 110 participants returned the answered questions. The overall significant type of burnout was present in 46.3% of the respondents while 53.7%, were for free or minimal burnout. Personal, work-related, and patient-related burnout recorded 62%/38%; 40% to 60%, and 60%:40% for free or minimal to significant burnout. The overall burnout types of values were equal in both gender as well as training levels with no significant differences and P-valuesâ ≤â .05. Burnout values were close to each other among the participants in different specialties, except for orthodontics residents which were the least. Analysis of variance, followed by chi-square tests showed a significant difference among participants in different specialties in type and categories of burnout with P-values between .002 to .029. Finally, the burnout value was higher among married participants. Overall burnout types were marginally similar between genders and training levels, while the significant was slightly higher in females, married, highest training level, restorative, and prosthodontic speciality participants.
Subject(s)
Burnout, Professional , Internship and Residency , Humans , Male , Female , Burnout, Professional/epidemiology , Burnout, Professional/psychology , Cross-Sectional Studies , Prevalence , Saudi Arabia/epidemiology , Surveys and Questionnaires , Risk FactorsABSTRACT
BACKGROUND We investigated the bond strength, tensile strength, and water absorption properties of 4 widely used chairside silicone long-term denture soft lining materials and compared properties with those of heat-cured silicone material. MATERIAL AND METHODS Four chairside materials (GC Reline Soft, Mucopren Soft, Sofreliner Soft, and Elite Soft Relining) and a heat-cured silicone material (Molloplast B) were investigated. For tensile and shear bond strength and tensile strength, samples were prepared according to the manufacturers' instructions and the testing machine used. For water absorption, IOS 1567 was followed to prepare specimens. Bond strengths were measured using a Lloyd Instruments materials testing machine. Ten specimens for each test were prepared for each soft liner, except for water absorption and solubility tests, for which only 5 specimens were prepared. ANOVA, Bonferroni, and Kruskal-Wallis tests were used to compare values of materials and assess changes over time. RESULTS There was strong evidence of differences in the properties between materials. GC Reline Soft showed comparable tensile bond (1.4±0.6 MPa), shear bond (1.1±0.4 MPa), tensile strength (5.44±0.98), water absorption (0.92±0.2 µg/mm³), and solubility values (0.3±0.2 µg/mm3) to that of Molloplast B (1.4±0.4; 1.6±0.5; 4.53±0.9 MPa, 1.7±0.3, and 1.0±0.3 µg/mm³, respectively). The water solubility of Sofreliner Soft was significantly lower (1.5±0.8 µg/mm³) than that of Molloplast B. CONCLUSIONS There were significant differences between some properties of 4 chairside denture soft lining materials and that of Molloplast B, which had higher shear and tensile bond strength than chairside denture silicone soft lining materials but had the highest water solubility.
Subject(s)
Dental Bonding , Denture Liners , Hot Temperature , Materials Testing , Silicone Elastomers/chemistry , Water , Tensile Strength , Denture Bases , Surface PropertiesABSTRACT
Aim: To investigate the hardness and energy absorption of four commercially available chairside types of silicone materials and compare their properties with heat-cured silicone material. Materials: The chairside materials investigated were GC reline soft, mucopren soft, sofreliner soft and elite soft relining. The heat-cured polymer silicone material was Molloplast B. All soft lining materials were processed according to manufacturers' instructions. Two properties were investigated. Ten specimens for each test were prepared for each soft liner except for the water absorption and solubility test, for which only five specimens were prepared. The specimens of energy absorption (10 × 10 × 3 mm) were tested using a Lloyd instruments testing machine. Hardness specimens (38 × 38 × 3) were tested using a shore A durometer and were divided into two subgroups; dry and wet storage. Results: The specimens of energy absorption (10 × 10 × 3 mm) were tested using a Lloyd instruments testing machine. Sofreliner soft was significantly softer than Molloplast B. GC reline soft was significantly harder than molloplast B. At high loads, sofreliner soft and elite soft relining was significantly more resilient than molloplast B. Mucopren soft was significantly stiffer than Molloplast B. At low loads, all materials showed similarities in stiffness and resilience; the difference between them was insignificant. After one month of immersion, GC reline and mucopren significantly increased hardness values. Conclusion: In all conditions and at all four-time points, the hardness values for GC Reline soft were the greatest, and hardness values for Sofreliner Soft were the least. Some chairside soft denture lining materials could have similar significant properties to molloplast-B, such as sofreliner soft and elite.