Influence of different baking powders on physico-chemical, sensory and volatile compounds in biscuits and their impact on textural modifications during soaking.

The aim of this study was to investigate the effects of different type of leavening agents (ammonium bicarbonate-A, cream of tartar-B, grape-based leavening agent-C, baking powder-D) on the structural (also after soaking), physico-chemical and other quality characteristics of biscuits made with the same formulation. The major changes observed between samples were related to their textural properties, volatile profile and sensory characteristics. The presence of ammonium bicarbonate in sample A, gave arise to a biscuit with the most homogeneous surface appearance, the less hard structure and highest fracturability and spread, that promoted their greater milk uptake during soaking. The B and C biscuits, made with baking powder having tartaric acid, were characterized by a crisper texture and lower sensory overall acceptability. The presence in formulation of baking powders made with cream of tartar (B) and ammonium bicarbonate (A) mostly influenced the biscuit volatile profiles. Biscuit sample obtained with the most common baking powder (diphosphates powder) showed in general intermediate characteristics between A and B-C samples. Results obtained in this study demonstrate that a lot of final properties of biscuits can be strongly influenced by the type of leavening agents used in formulation.

Chemical and physical changes during storage of differently packed biscuits formulated with sunflower oil.

Various innovative materials are already present on the market, but there is scarce knowledge on their performances when used in real food system. In this study, two innovative packaging materials were investigated for the evaluation during storage of biscuits formulated with sunflower oil and compared to a traditional one. To this aim, three different flexible and composite film containing a metalized plastic layer and a paper layer were used. The control included orientated polypropylene (OPP), while the innovative materials contained poly-lactic acid or OPP with a pro-oxidant additive, ethylene vinyl acetate. The physical (moisture, water activity, hardness/crispness) and chemical (peroxide value, conjugated dienes and trienes, and hexanal and nonanal formation) changes of biscuits were monitored during accelerated storage (35 °C and 50% of relative humidity for 105 days). Packaging materials did not have significant impact on textural quality of biscuits. Instead remarkable differences were observed during storage in the evolution of different lipid oxidation compounds, moisture content and water activity among differently packed biscuits. A new ecofriendly packaging showed the best performances in terms of physico-chemical quality of biscuits. The obtained results provide useful information for industrial application.

Characterization of Composite Edible Films Based on Pectin/Alginate/Whey Protein Concentrate.

Edible films and coatings gained renewed interest in the food packaging sector with polysaccharide and protein blending being explored as a promising strategy to improve properties of edible films. The present work studies composite edible films in different proportions of pectin (P), alginate (A) and whey Protein concentrate (WP) formulated with a simplex centroid mixture design and evaluated for physico-chemical characteristics to understand the effects of individual components on the final film performance. The studied matrices exhibited good film forming capacity, except for whey protein at a certain concentration, with thickness, elastic and optical properties correlated to the initial solution viscosity. A whey protein component in general lowered the viscosity of the initial solutions compared to that of alginate or pectin solutions. Subsequently, a whey protein component lowered the mechanical strength, as well as the affinity for water, as evidenced from an increasing contact angle. The effect of pectin was reflected in the yellowness index, whereas alginate and whey protein affected the opacity of film. Whey protein favored higher opacity, lower gas barrier values and dense structures, resulting from the polysaccharide-protein aggregates. All films displayed however good thermal stability, with degradation onset temperatures higher than 170 °C.

Fermented Nut-Based Vegan Food: Characterization of a Home made Product and Scale-Up to an Industrial Pilot-Scale Production.

Because of the impossibility to consume food of animal origin, vegan consumers are looking for substitutes that could enrich their diet. Among many substitutes, fermented nut products are made from different nut types and obtained after soaking, grinding, and fermentation. Although other fermented vegetable products have been deeply investigated, there are few data about the fermentative processes of nut-based products and the microbial consortia able to colonize these products are not yet studied. This study characterized a hand-made vegan product obtained from cashew nut. Lactic acid bacteria responsible for fermentation were identified, revealing a succession of hetero- and homo-fermentative species during process. Successively, some lactic acid bacteria isolates from the home-made vegan product were used for a pilot-scale fermentation. The products obtained were characterized and showed features similar to the home-made one, although the microbiological hazards have been prevented through proper and rapid acidification, enhancing their safety features. PRACTICAL APPLICATION: Spontaneous fermented products are valuable sources of microorganisms that can be used in many food processes as starter cultures. The lactic acid bacteria isolated in this research can be exploited by industries to develop new foods and therefore to enter new markets. The use of selected starter cultures guarantees good organoleptic characteristics and food safety (no growth of pathogens).

Influence of the addition of soy product and wheat fiber on rheological, textural, and other quality characteristics of pizza.

The effect of partial replacement of wheat flour with soy paste and wheat fiber on rheological, textural, physicochemical, and organoleptic characteristics of an enriched pizza base (E) was investigated in comparison with those of a control pizza base (C). New ingredients (e.g., enriched cooked ham, whey cheese, and tomato sauce realized using food industry by-products) were also used in E pizza topping to further increase its nutritional properties. Enriched dough was developed first at a laboratory level. Large and small deformation, moisture, leavening activity, and metabolic heat were tested. On the final product, produced at the industrial level, textural, color, sensory, and nutritional analyses were performed. Preliminary rheological analysis was essential to evaluate the suitability of the new pizza to be processed at industrial level. Both pizza dough samples showed a solid elastic-like behavior; however, the addition of soy and fiber increased moisture content of E pizza, due to the water binding ability of soy protein and to the effect of fibers that also decreased E dough elasticity. No differences in extensibility between the two samples were observed, whereas significantly lower values of resistance to extension and dough force were shown in sample E. These differences were likely due to the presence of soy that interfere with gluten formation and to the dietary fibers that interact with water. Ingredients used in E pizza improved its nutritional quality increasing dietary fibers and protein, and decreasing saturated fatty acids and cholesterol content, which contributed to decrease energy value, in terms of kilocalorie reduction. PRACTICAL APPLICATIONS: In this work, the effects of using new ingredients (e.g., soy paste, wheat fiber) on the rheological, textural, physicochemical, nutritional, and organoleptic characteristics of an enriched pizza type were investigated both at laboratory and industrial levels. The new pizza provides a product that combines solid technological performances, in terms of rheological properties and dough elasticity, with improved and balanced nutritional quality, thanks also to the ingredients used in the topping. Results demonstrate the possibility of obtaining new pizza products characterized by nutritional and sensorial properties tailored for different group of consumers.

The role of endovascular therapy in acute mesenteric ischemia.

BACKGROUND: Endovascular therapy, including aspiration thrombectomy and local thrombolytic therapy, often associated with angioplasty and stent placement, has been described in the literature. The purpose of this study was to review case series of patients with acute mesenteric ischemia treated with endovascular therapy and evaluate their outcomes. METHODS: An online review using PubMed was carried out to identify all English articles about this topic in the time interval from 2005 to 2016. THE FOLLOWING VARIABLES WERE EXTRACTED: number of patients, cause of occlusion, symptoms, arteries involved, number of sessions of treatment, technical success, clinical success, recurrence rate, complications, mortality rate, number of patients who underwent diagnostic laparoscopy or surgical resection of ischemic bowel. RESULTS: Eighteen papers met the inclusion criteria and were included. Among the patients with arterial mesenteric ischemia treated with endovascular approach, the technical success rate was high (up to 100%) and data regarding clinical success are encouraging, even though they are few and heterogeneous. Technical success rate and clinical success of patients with acute venous mesenteric ischemia approached with endovascular treatment was 74-100% and 87.5-100% respectively. CONCLUSIONS: Current advances in endovascular therapies have made these treatments feasible for mesenteric ischemia.

Physico-chemical and metabolomic characterization of KAMUT® Khorasan and durum wheat fermented dough.

Investigations were made in order to evaluate the influence of the flour type, chemical acidification and fermentation on characteristics of doughs obtained with durum wheat and KAMUT® Khorasan flour. Doughs were observed immediately after mixing, 90 and 360 min of leavening at 30 °C. Fundamental rheology, yeasts heat production by isothermal microcalorimetry and the interaction between water and biopolymers by means of time domain nuclear magnetic resonance were evaluated. In addition aromatic metabolite development was followed by means of the combined application of gas-chromatography and electronic nose. KAMUT® Khorasan flour was found to be more suitable than durum wheat for the fermentation processes tested, especially at acidic conditions, as shown by the increase of the volume and the metabolic heat production by yeast. In acidified dough the pattern of volatile metabolites allowed a clear distinction between the types of dough. Moreover the water/starch proton pool was characterized by higher T2 values in the KAMUT® Khorasan samples.

Effect of different new packaging materials on biscuit quality during accelerated storage.

BACKGROUND: The effect of innovative multilayer packaging materials versus a standard one on biscuit quality was studied during accelerated storage at 25, 35, 45 °C and 50% relative humidity for 92 days. Three different packaging materials were used: metalized orientated polypropylene (OPP)/paper (control); metalized poly-lactic acid (PLA)/paper; metalized OPP with ethylene vinyl acetate pro-oxidant additive (EVA-POA)/paper. EVA-POA additive is used to make the plastic layer biodegradable. Various quality sample parameters (moisture, water activity (aw ), texture, peroxide value (PV), hexanal) were analysed during storage. Rate constants (k) and activation energies (Ea ) of hydration reactions and hexanal formation were calculated. RESULTS: No remarkable differences in the evolution of primary and secondary lipid oxidation were observed among differently packed biscuits during storage. All samples maintained PV levels between 4 and 14 meq O2 kg(-1) oil. The product in flexible packaging with PLA reached the highest moisture and aw levels, but they did not significantly and adversely affect the other quality characteristics. CONCLUSION: The obtained results demonstrate that the new tested packaging materials were suitable for commercial biscuit storage, having similar performance and preservation effects on the overall product quality to those of the standard one. Furthermore, these results could make a contribution to the food industry, encouraging the use of packaging materials with a negligible environmental impact as an alternative to petroleum-based ones.

The influence of different processing stages on particle size, microstructure, and appearance of dark chocolate.

UNLABELLED: The effect of different process stages on microstructural and visual properties of dark chocolate was studied. Samples were obtained at each phase of the manufacture process: mixing, prerefining, refining, conching, and tempering. A laser light diffraction technique and environmental scanning electron microscopy (ESEM) were used to study the particle size distribution (PSD) and to analyze modifications in the network structure. Moreover, colorimetric analyses (L*, h°, and C*) were performed on all samples. Each stage influenced in stronger way the microstructural characteristic of products and above all the PSD. Sauter diameter (D [3.2]) decreased from 5.44 µm of mixed chocolate sample to 3.83 µm, of the refined one. ESEM analysis also revealed wide variations in the network structure of samples during the process, with an increase of the aggregation and contact point between particles from mixing to refining stage. Samples obtained from the conching and tempering were characterized by small PS, and a less dense aggregate structure. From color results, samples with the finest particles, having larger specific surface area and the smallest diameter, appeared lighter and more saturated than those with coarse particles. PRACTICAL APPLICATION: Final quality of food dispersions is affected by network and particles characteristics. The deep knowledge of the influence of single processing stage on chocolate microstructural properties is useful in order to improve or modify final product characteristics. ESEM and laser diffraction are suitable techniques to study changes in chocolate microstructure.

Diverticular disease severity score based on CT colonography.

OBJECTIVE: We propose a diverticular disease severity score (DDSS) based on CT colonography (CTC) findings. METHODS: Seventy-nine patients (62 ± 14.5 years) underwent CTC after recovering from an episode of acute diverticulitis. Two independent readers classified each case using a four-point scale (DDSS), based on maximum sigmoid colon wall thickness (MSCWT) and minimum lumen diameter at CTC: 1 = MSCWT <3 mm, lumen diameter ≥15 mm; 2 = MSCWT 3-8 mm, lumen diameter ≥5 mm; 3 = MSCWT ≥8 mm, lumen diameter ≥5 mm; 4 = MSCWT ≥8 mm, lumen diameter <5 mm. Intra- and interobserver reproducibility was evaluated. Of 79 patients, 32 (40 %) underwent surgery after CTC; MSCWT was directly measured on the pathological specimen. RESULTS: Intra- and interobserver reproducibility of DDSS were almost perfect (k = 0.90-0.84). DDSS significantly correlated with the probability of surgery (P = 0.001). After surgery, histopathology revealed acute/chronic diverticular inflammation only in 29 cases, and superimposed sigmoid cancer (n = 2) or Crohn's disease (n = 1) in 3 patients with a DDSS of 4. MSCWT at histopathology correlated with DDSS (P = 0.008). CONCLUSION: DDSS is highly reproducible and correlates with pathological MSCWT. Nearly 1 in 3 patients with a DDSS of 4 had significant superimposed histopathology. CTC with DDSS can provide colorectal surgeons with valuable information. KEY POINTS: • A diverticular disease severity score (DDSS) based on CT colonography is proposed. • This DDSS is based on sigmoid colon wall thickness and lumen diameter. • High scores may be associated with relevant coexisting lesions. • A CTC-based DDSS may influence therapeutic decision-making.

Physicochemical and sensory properties of fresh potato-based pasta (gnocchi).

This study dealt with the characterization and quality assessment of 3 kinds of potato-based pasta (gnocchi) made with steam-cooked, potato puree (water added to potato flakes), and reconstituted potatoes as main ingredients. The aim of the research was to evaluate the quality of the products in terms of physicochemical, textural, and sensory characteristics. Water content, water activity, color (L* and h°), and texture (texture profile analysis [TPA] and shearing test) were evaluated on both raw and cooked samples. In addition, on the recovered cooking water the loss of solid substances was determined and on the cooked gnocchi a sensory assessment was performed. Eight sensory attributes (yellowness, hardness, gumminess, adhesiveness, potato taste, sweet taste, flour taste, and sapidity) were investigated. Statistically significant differences among products were obtained, especially concerning textural properties. In fact, sample made with reconstituted potatoes and emulsifiers resulted the hardest (8.53 ± 1.22 N), the gummiest (2.90 ± 0.05 N), and the "chewiest" (2.90 ± 0.58 N) after cooking. Gnocchi made with potato puree or reconstituted potatoes significantly differed from the one produced with steam-cooked potatoes in terms of sensory properties (yellowness, hardness, flour taste, and sapidity). Pearson's correlation analysis between some textural instrumental and sensory parameters showed significant correlation coefficients (0.532 < r < 0.810). Score plot of principal component analysis (PCA) confirmed obtained results from physicochemical and sensory analyses, in terms of high discriminant capacity of colorimetric and textural characteristics.