ABSTRACT
Reinforced concrete structures are prone to the corrosion of steel bars when exposed to chloride-rich environments, which can severely impact their durability. To address this issue, a comprehensive understanding of the factors influencing chloride ion diffusion in concrete is essential. This paper provides a summary of recent domestic and foreign research on chloride ion transport in concrete, focusing on six key factors: water-binder ratio, additive content, crack width, ambient temperature, relative humidity, and dry-wet cycles. The findings show that the diffusion coefficient of chloride ions in concrete increases with a higher water-binder ratio and decreases with increased additive content. Additionally, wider cracks result in a greater diffusion of chloride ions. The permeability resistance of concrete to chloride ions decreases with rising temperature and humidity, and dry-wet cycles further accelerate the diffusion of chloride ions. The article concludes by discussing various anti-corrosion measures, such as the use of corrosion inhibitors, surface coatings, and electrochemical treatments, to ensure the longevity of the structure. Finally, directions for future research are proposed.
ABSTRACT
OBJECTIVE: To examine the possible synergic effect of spindle view-assisted intracytoplasmic sperm injection (SV-ICSI) with assisted oocyte activation (AOA) for low fertilization rate. MATERIALS AND METHODS: A single-center retrospective study from 2019/09-2023/06, a total of 47 patients, autologous IVF cycle, and low fertilization rate history, including control group (SV-ICSI, 33 patients) and intervention group (AOA-SV-ICSI, 14 patients), comparing fertilization rate, blastocyst formation rate, and clinical pregnancy rate. RESULTS: The blastocyst formation rate was significantly higher (p = 0.020) in the AOA-SV-ICSI group than in the SV-ICSI group. The fertilization rate (P = 0.468) and clinical pregnancy rate (p = 0.057) were non-significant between groups. CONCLUSION: The AOA-SV-ICSI group's blastocyst formation rate significantly improved in patients with previous low fertilization rates, which might help them obtain more useable embryos for further embryo implantation.
Subject(s)
Pregnancy Rate , Sperm Injections, Intracytoplasmic , Humans , Sperm Injections, Intracytoplasmic/methods , Female , Retrospective Studies , Adult , Pregnancy , Male , Fertilization in Vitro/methods , Oocytes , Embryo Transfer/methods , Blastocyst , Embryo ImplantationABSTRACT
Graphitic carbon nitride (g-C3N4), since the pioneering work on visible-light photocatalytic water splitting in 2009, has emerged as a highly promising advanced material for environmental and energetic applications, including photocatalytic degradation of pollutants, photocatalytic hydrogen generation, and carbon dioxide reduction. Due to its distinctive two-dimensional structure, excellent chemical stability, and distinctive optical and electrical properties, g-C3N4 has garnered a considerable amount of interest in the field of biomedicine in recent years. This review focuses on the fundamental properties of g-C3N4, highlighting the synthesis and modification strategies associated with the interfacial structures of g-C3N4-based materials, including heterojunction, band gap engineering, doping, and nanocomposite hybridization. Furthermore, the biomedical applications of these materials in various domains, including biosensors, antimicrobial applications, and photocatalytic degradation of medical pollutants, are also described with the objective of spotlighting the unique advantages of g-C3N4. A summary of the challenges faced and future prospects for the advancement of g-C3N4-based materials is presented, and it is hoped that this review will inspire readers to seek further new applications for this material in biomedical and other fields.
ABSTRACT
Sorption-based atmospheric water harvesting is an attractive technology for exploiting unconventional water sources. A critical challenge is how to facilitate fast and continuous collection of potable water from air. Here, a bio-based gel (cellulose/alginate/lignin gel, CAL gel), resulting from the integration of a whole biomass-derived polymer network with lithium chloride is reported. A fast adsorption/desorption kinetics, with a water capture rate of 1.74 kg kg-1 h-1 at 30% relative humidity and a desorption rate of 1.98 kg kg-1 h-1, is simultaneously realized in one piece of CAL gel, because of its strong hygroscopicity, hydrophilic network, abundant water transport channels, photothermal conversion ability, and ≈200-µm-thick self-supporting bulky structure caused by multicomponent synergy. A solar-driven, drum-type, tunable, and portable harvester is designed that can harvest atmospheric water within a brief time. Under outdoor conditions, the harvester with CAL gels operates 36 switches (180°) per day realizes a water yield of 8.96 kg kggel -1 (18.87 g kgdevice -1). This portable harvester highlights the potential for fast and scalable atmospheric water harvesting in extreme environments.
ABSTRACT
BACKGROUND: Splicing factors are vital for the regulation of RNA splicing, but some have also been implicated in regulating transcription. The underlying molecular mechanisms of their involvement in transcriptional processes remain poorly understood. RESULTS: Here, we describe a direct role of splicing factor RBM22 in coordinating multiple steps of RNA Polymerase II (RNAPII) transcription in human cells. The RBM22 protein widely occupies the RNAPII-transcribed gene locus in the nucleus. Loss of RBM22 promotes RNAPII pause release, reduces elongation velocity, and provokes transcriptional readthrough genome-wide, coupled with production of transcripts containing sequences from downstream of the gene. RBM22 preferentially binds to the hyperphosphorylated, transcriptionally engaged RNAPII and coordinates its dynamics by regulating the homeostasis of the 7SK-P-TEFb complex and the association between RNAPII and SPT5 at the chromatin level. CONCLUSIONS: Our results uncover the multifaceted role of RBM22 in orchestrating the transcriptional program of RNAPII and provide evidence implicating a splicing factor in both RNAPII elongation kinetics and termination control.
Subject(s)
Positive Transcriptional Elongation Factor B , RNA Polymerase II , Humans , Chromatin , Positive Transcriptional Elongation Factor B/genetics , Positive Transcriptional Elongation Factor B/metabolism , RNA Polymerase II/metabolism , RNA Splicing , RNA Splicing Factors/genetics , Transcription, Genetic , Transcriptional Elongation Factors/genetics , Transcriptional Elongation Factors/metabolismABSTRACT
Leukocyte counts and ratios are independent biomarkers to determine the severity and prognosis of acute ischemic stroke (AIS). In AIS, the connection between leukocytes and large vessel occlusion (LVO) is uncertain. This study aims to determine the relationship between the existence of LVO and leukocyte counts and ratios on admission to AIS. Patients were retrospectively evaluated within six hours of AIS starting between January 2019 and April 2023. On admission, blood specimens were collected, and leukocyte subtype counts were promptly analyzed. Computed tomography or digital subtraction angiography were utilized to verify the existence of LVO. Regression analysis and receiver operating characteristic (ROC) curves were employed to investigate the connections between the counts and ratios of leukocytes and the existence of LVO, as well as the discriminatory ability of these variables in predicting LVO. Total white blood cell (WBC) count, neutrophil count, and neutrophil-to-lymphocyte ratio (NLR) were substantially higher in the LVO existence group compared to the LVO absence group, whereas the ratio of eosinophils to neutrophils (ENRâ ×â 102) was lower (Pâ <â .001, respectively). Significant associations were observed between total WBC counts, neutrophil counts, NLR, and ENRâ ×â 102 and the existence of LVO (Pâ <â .001, respectively). Total WBC counts, neutrophil counts, NLR, and ENRâ ×â 102 had respective areas under the curves (AUC) of 0.730, 0.748, 0.704, and 0.680 for identifying LVO. Our results show that in AIS patients, the existence of LVO is independently associated with elevated total WBC and neutrophil counts, high NLR, and low ENRâ ×â 102 levels. Neutrophil and total WBC counts, as well as NLR and levels of ENRâ ×â 102, may serve as potential biomarkers for predicting LVO. Neuroinflammation, based on the existence of LVO, should be given particular attention in future investigations.
Subject(s)
Brain Ischemia , Ischemic Stroke , Stroke , Humans , Ischemic Stroke/complications , Retrospective Studies , Stroke/complications , Brain Ischemia/complications , Leukocyte Count , Lymphocytes , Neutrophils , BiomarkersABSTRACT
Pulp and paper are gradually transforming from a traditional industry into a new green strategic industry. In parallel, cellulose-derived transparent paper is gaining ground for the development of advanced functional materials for light management with eco-friendly, high performance, and multifunctionality. This review focuses on methods and processes for the preparation of cellulose-derived transparent papers, highlighting the characterization of raw materials linked to responses to different properties, such as optical and mechanical properties. The applications in electronic devices, energy conversion and storage, and eco-friendly packaging are also highlighted with the objective to showcase the untapped potential of cellulose-derived transparent paper, challenging the prevailing notion that paper is merely a daily life product. Finally, the challenges and propose future directions for the development of cellulose-derived transparent paper are identified.
ABSTRACT
Antibacterial hydrogels have attracted significant attention due to their diverse applications, efficient antimicrobial properties, and adaptability to various environments and requirements. However, their relatively fragile structure, coupled with the potential for environmental toxicity when exposed to their surroundings for extended periods, may significantly limit their practical application potential. In this work, a composite hydrogel was synthesized with outstanding mechanical features and antibacterial capability. The hydrogel was developed through the combination of the eco-friendly and enduring antibacterial agent, lignin silver nanoparticles (Lig-Ag NPs), with polyvinyl alcohol (PVA) and sodium alginate (SA), in varying proportions. The successful synthesis of the hydrogel and the dispersed distribution of Lig-Ag NPs within the hydrogel were confirmed by various analytical techniques, including field emission scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), mercury intrusion porosimetry (MIP), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The formation of multiple hydrogen bonds between Lig-Ag NPs and the composites contributed to a more stable and dense network structure of the hydrogel, consequently enhancing its mechanical properties. Rheological tests revealed that the hydrogel exhibited an elastic response and demonstrated outstanding self-recovery properties. Significantly, the antibacterial hydrogel demonstrated effectiveness against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), achieving a <5% survival of bacteria within 12 h. This study presented a green and straightforward synthetic strategy for the application of antibacterial composite hydrogels in various fields.
ABSTRACT
Ovarian endometriosis is characterized by the growth of endometrial tissue within the ovary, causing infertility and chronic pain. However, its pathophysiology remains unclear. Utilizing high-precision single-cell RNA sequencing, we profile the normal, eutopic, and ectopic endometrium from 34 individuals across proliferative and secretory phases. We observe an increased proportion of ciliated cells in both eutopic and ectopic endometrium, characterized by a diminished expression of estrogen sulfotransferase, which likely confers apoptosis resistance. After translocating to ectopic lesions, endometrial epithelium upregulates nicotinamide N-methyltransferase expression that inhibits apoptosis by promoting deacetylation and subsequent nuclear exclusion of transcription factor forkhead box protein O1, thereby leading to the downregulation of the apoptotic gene BIM. Moreover, epithelial cells in ectopic lesions elevate HLA class II complex expression, which stimulates CD4+ T cells and consequently contributes to chronic inflammation. Altogether, our study provides a comprehensive atlas of ovarian endometriosis and highlights potential therapeutic targets for modulating apoptosis and inflammation.
Subject(s)
Endometriosis , Female , Humans , Endometriosis/pathology , Epithelial Cells/metabolism , Epithelium/metabolism , Endometrium/metabolism , Single-Cell Analysis , Inflammation/pathologyABSTRACT
Car-sharing systems require accurate demand prediction to ensure efficient resource allocation and scheduling decisions. However, developing precise predictive models for vehicle demand remains a challenging problem due to the complex spatio-temporal relationships. This paper introduces USTIN, the Unified Spatio-Temporal Inference Prediction Network, a novel neural network architecture for demand prediction. The model consists of three key components: a temporal feature unit, a spatial feature unit, and a spatio-temporal feature unit. The temporal unit utilizes historical demand data and comprises four layers, each corresponding to a different time scale (hourly, daily, weekly, and monthly). Meanwhile, the spatial unit incorporates contextual points of interest data to capture geographic demand factors around parking stations. Additionally, the spatio-temporal unit incorporates weather data to model the meteorological impacts across locations and time. We conducted extensive experiments on real-world car-sharing data. The proposed USTIN model demonstrated its ability to effectively learn intricate temporal, spatial, and spatiotemporal relationships, and outperformed existing state-of-the-art approaches. Moreover, we employed negative binomial regression with uncertainty to identify the most influential factors affecting car usage.
ABSTRACT
Holliday junction (HJ) is a four-way structured DNA intermediate in processes of homologous recombination and DNA double-stranded break (DSB) repair. In bacteria, HJs are processed via either the RuvABC or RecG-dependent pathways. In addition, RecG also plays a critical role in the reactivation of stalled replication forks, making it an attractive target for antibacterial drug development. Here, we conducted a high-throughput screening targeting the RecG helicase from a common opportunistic pathogen Pseudomonas aeruginosa (Pa). From a library containing 7920 compounds, we identified Ebselen and TPI-1 (2',5'-Dichloro-[1,1'-biphenyl]-2,5-dione) as two potent PaRecG inhibitors, with IC50 values of 0.31 ± 0.02 µM and 1.16 ± 0.06 µM, respectively. Further biochemical analyses suggested that both Ebselen and TPI-1 inhibited the ATPase activity of PaRecG, and hindered its binding to HJ DNA with high selectivity. These compounds, when combined with our previously reported RuvAB inhibitors, resulted in more severe DNA repair defects than the individual treatment, and potently enhanced the susceptibility of P. aeruginosa to the DNA damage agents. This work reports novel small molecule inhibitors of RecG, offering valuable chemical tools for advancing our understanding of RecG's function and mechanism. Additionally, these inhibitors might be further developed as promising antibacterial agents in the fight against P. aeruginosa infections.
Subject(s)
Escherichia coli Proteins , Isoindoles , Organoselenium Compounds , Pseudomonas aeruginosa , Escherichia coli Proteins/genetics , Escherichia coli Proteins/metabolism , Bacterial Proteins , DNA Helicases/metabolism , DNA Repair , DNA Damage , DNA, Cruciform , DNA ReplicationABSTRACT
Adhesives are used extensively in the wood industry. As resource and environmental issues become increasingly severe, the development of green and sustainable biomass-based adhesives has attracted increasing attention. In this work, a green wood adhesive is developed from poly(vinyl alcohol) and lignin with molecular designs of lignin extending beyond those in nature. The lignin undergoes extraction from corncob residue, aldehydration, and phenolisation (phenol, resorcinol, and catechol) to significantly increase the phenolic hydroxyl groups (over 7.92 mmol/g), which has the effect of enhancing the hydrogen bonding force between the adhesive and the wood, thereby greatly improving adhesive performance. Compared with pure PVA, polyphenol lignin-containing PVA showed improved adhesion strength and hydrophobicity. PVA/resorcinol-lignin has the significantly improved wood lap shear strength (6.27 MPa, 77.6 % improvement) and hydrophobicity (almost 100 % increase in wet shear strength). This research not only provides a green and high-performance alternative raw material for wood adhesives but also broadens the path for large-scale application of biomass.
Subject(s)
Lignin , Polyphenols , Polyphenols/analysis , Lignin/chemistry , Polyvinyl Alcohol , Adhesives/chemistry , Wood/chemistry , Phenols/chemistry , Methanol , Polyvinyl Chloride , ResorcinolsABSTRACT
BACKGROUND: Ubiquitination, small ubiquitin-related modifiers, and NEDDylation are now found to function in cancer biology; however, its role in the oral cancer patients remains unclear. METHODS: A set of bioinformatic tools was integrated to analyze the expression and prognostic significance of ubiquitin and ubiquitin-like (UB/UBL) genes. A UB/UBL-related risk score was developed via correlation analyses, univariate Cox regression, and multivariate Cox regression. Nomogram analysis evaluates the model's prediction performance. The drug sensitivity analysis, immune profiles of UB/UBL-classified oral squamous cell carcinoma (OSCC) patients, and their related function pathway were investigated, and the role of UB/UBL-related genes in drug therapy was analyzed. RESULTS: A total of six prognostic UB/UBL-related genes were obtained. PSMD3, PCGF2, and H2BC10 were significantly downregulated in OSCC tissue and associated with longer survival time. OSCC patients in the high-risk group showed a significantly lower overall survival and enriched in cancer-related pathways. The prognostic potential of genes associated with UB/UBL was discovered, and patients with high-risk scores showed an increase of protumor immune infiltrates and a high expression of immune checkpoints. Moreover, the area under the curve of the annual survival rate was 0.616, 0.671, and 0.673, respectively. Besides, patients in the high-risk group are more sensitive to docetaxel, doxorubicin, and methotrexate therapy. CONCLUSIONS: We construct a prognosis model for OSCC patients with UB/UBL-related genes and try to find a new approach to treating oral cancer patients. The UB/UBL-related signature is helpful in developing new tumor markers, prognostic prediction, and in guiding treatment for OSCC patients.
Subject(s)
Carcinoma, Squamous Cell , Head and Neck Neoplasms , Mouth Neoplasms , Humans , Squamous Cell Carcinoma of Head and Neck/genetics , Carcinoma, Squamous Cell/drug therapy , Carcinoma, Squamous Cell/genetics , Prognosis , Sumoylation , Mouth Neoplasms/genetics , Ubiquitination , Ubiquitin/metabolism , Biomarkers, Tumor/genetics , Biomarkers, Tumor/metabolismABSTRACT
OBJECTIVE: The study addresses the long-standing challenge of insufficient length in vascularized fibular flaps when reconstructing large mandibular defects that require dual-barrel grafts. Employing personalized 3D-printed osteotomy guides, the study aims to optimize fibular utilization and minimize the required graft length. MATERIAL AND METHODS: Two reconstruction methods for distal bone defects were compared: a fold-down (FD) group that employed a specialized osteotomy guide for folding down a triangular bone segment, and a traditional double-barrel (DB) group. Metrics for comparison included defect and graft lengths, as well as the graft-to-defect length ratio. Postoperative quality of life was assessed using the University of Washington Quality of Life questionnaire (UW-QoL). RESULT: Both FD and DB groups achieved successful mandibular reconstruction. Despite larger defects in the FD group (117 ± 31.35 mm vs 84 ± 35.34 mm, p = 0.028), the used fibula length was not statistically longer in the FD group. The median ratio of graft-to-defect length was also lower in the FD group (1.327 vs 1.629, p = 0.024), suggesting that FD required only 82.47% of the graft length needed in the DB approach. Quality of life scores post-surgery were comparable between the groups. CONCLUSION: Personalized 3D-printed osteotomy guides enhance fibula graft efficacy for reconstructing larger mandibular defects, necessitating shorter graft lengths while preserving postoperative quality of life. CLINICAL RELEVANCE: This study confirms the utility of 3D printing technology as an effective and precise tool in orthopedic surgery, particularly for complex reconstructions like large mandibular defects. It suggests a viable alternative that could potentially revolutionize current practices in bone grafting.
Subject(s)
Free Tissue Flaps , Mandibular Reconstruction , Fibula/surgery , Quality of Life , Mandible/surgery , Surgical Flaps , Mandibular Reconstruction/methods , Bone Transplantation/methods , OsteotomyABSTRACT
OBJECTIVE: To examine the therapeutic effect of Fangji Fuling Decoction (FFD) on sepsis through network pharmacological analysis combined with in vitro and in vivo experiments. METHODS: A sepsis mouse model was constructed through intraperitoneal injection of 20 mg/kg lipopolysaccharide (LPS). RAW264.7 cells were stimulated by 250 ng/mL LPS to establish an in vitro cell model. Network pharmacology analysis identified the key molecular pathway associated with FFD in sepsis. Through ectopic expression and depletion experiments, the effect of FFD on multiple organ damage in septic mice, as well as on cell proliferation and apoptosis in relation to the mitogen-activated protein kinase 14/Forkhead Box O 3A (MAPK14/FOXO3A) signaling pathway, was analyzed. RESULTS: FFD reduced organ damage and inflammation in LPS-induced septic mice and suppressed LPS-induced macrophage apoptosis and inflammation in vitro (P<0.05). Network pharmacology analysis showed that FFD could regulate the MAPK14/FOXO signaling pathway during sepsis. As confirmed by in vitro cell experiments, FFD inhibited the MAPK14 signaling pathway or FOXO3A expression to relieve LPS-induced macrophage apoptosis and inflammation (P<0.05). Furthermore, FFD inhibited the MAPK14/FOXO3A signaling pathway to inhibit LPS-induced macrophage apoptosis in the lung tissue of septic mice (P<0.05). CONCLUSION: FFD could ameliorate the LPS-induced inflammatory response in septic mice by inhibiting the MAPK14/FOXO3A signaling pathway.
Subject(s)
Mitogen-Activated Protein Kinase 14 , Oxygen Radioisotopes , Sepsis , Wolfiporia , Mice , Animals , Mitogen-Activated Protein Kinase 14/metabolism , Lipopolysaccharides/pharmacology , Sepsis/complications , Signal Transduction , Inflammation/drug therapyABSTRACT
Constructing a high-performance ultraviolet shielding film is an effective way for addressing the growing problem of ultraviolet radiation. However, it is still a great challenge to achieve a combination of multifunctional, excellent mechanical properties and low cost. Here, inspired by the multiscale structure of biomaterials and features of lignin, a multifunctional composite film (CNF/CMF/Lig-Ag) is constructed via a facile vacuum-filtration method by introducing micron-sized cellulose fibers (CMF) and lignin-silver nanoparticles (Lig-Ag NPs) into the cellulose nanofibers (CNF) film network. In this composite film, the microfibers interweave with nanofibers to form a multiscale three-dimensional network, which ensures satisfactory mechanical properties of the composite film. Meanwhile, the Lig-Ag NPs are employed as a multifunctional filler to enhance the composite film's antioxidant, antibacterial and ultraviolet shielding abilities. As a result, the prepared CNF/CMF/Lig-Ag composite film demonstrates excellent mechanical properties (with tensile strength of 133.8 MPa and fracture strain of 7.4 %), good biocompatibility, high thermal stability, potent antioxidant and antibacterial properties. More importantly, such composite film achieves a high ultraviolet shielding rate of 98.2 % for ultraviolet radiation A (UVA) and 99.4 % for ultraviolet radiation B (UVB), respectively. Therefore, the prepared CNF/CMF/Lig-Ag composite film shows great potential in application of ultraviolet protection.
Subject(s)
Lignin , Metal Nanoparticles , Lignin/chemistry , Cellulose/chemistry , Silver/chemistry , Antioxidants , Ultraviolet Rays , Metal Nanoparticles/chemistry , Anti-Bacterial AgentsABSTRACT
Background: With the improvement of immunosuppressive regimens, the success rate and availability of ABO-incompatible (ABO-i) kidney transplantation (KT) have gradually increased. However, the management of immunosuppression protocols and complications associated with ABO-i KT is complex. Here, we report a clinical case of ABO-i living donor KT with allograft dysfunction caused by acute blood group antibody-dependent rejection triggered by human parvovirus B19 (B19V). Case report: The ABO blood group of the recipient was O, and that of the donor was B. The recipient had high baseline anti-B antibody titers (IgM, 1:1024; IgG, 1:64). Before transplantation, he completed a desensitization protocol comprising plasma exchange, double-filtration plasmapheresis, and rituximab, which maintained a low blood group antibody level and resulted in successful transplantation. Two weeks after surgery, the recipient developed a B19V infection combined with acute T-cell-mediated rejection. After the anti-rejection regimen, acute rejection (AR) was successfully reversed, but B19V persisted. One week after AR stabilization, the patient experienced acute antibody-mediated rejection that was more severe and refractory, resulting in the loss of the transplanted kidney. Conclusion: Desensitization combined with immunosuppressants can lead to overimmunosuppression and cause various infections. Infections could break the accommodation state of the patient, thereby inducing AR and resulting in the loss of the transplanted kidney.
ABSTRACT
To explore the influence of wind speed on the quality of tobacco in this study, we employed a heat pump-powered intensive curing barn and a three-stage curing process. By evaluating the influence of fan parameters on the quality of tobacco leaves at different curing stages, the optimal wind speed was determined. After adopting the optimized wind speed process, the degradation of macromolecular substances was faster, the accumulation of aroma substances was delayed to 55 °C, and the accumulation was more complete. Among them, the contents of reducing sugar and total sugar in flue-cured tobacco leaves were 22.25% and 29.2%, respectively, which were lower than those in the control group. The sugar was converted into more aroma substances, and the total amount of neutral aroma substances was 48.82% higher than that of the control group. The content of related aroma substances increased significantly. The content of petroleum ether extract related to aroma substances increased by 0.93% compared with the control group. The macromolecular substances were degraded more fully than the control group, such as the starch content decreased to 1.56%. The results of metabolomics showed that the contents of aldehydes, heterocyclic compounds, alcohols, ketones and esters increased significantly in different degrees after this process. These results show that the optimization of wind speed parameters can significantly improve the baking quality of tobacco leaves. This study provides a reference for the optimization of the flue-cured tobacco baking process.
Subject(s)
Hot Temperature , Wind , Nicotiana , Plant Leaves , Sugars , Macromolecular SubstancesABSTRACT
Naringenin is a natural product with several reported bioactivities and is the key intermediate for the entire class of plant flavonoids. The translation of flavonoids into modern medicine as pure compounds is often hampered by their low abundance in nature and their difficult chemical synthesis. Here, we investigated the possibility to use the filamentous fungus Penicillium rubens as a host for flavonoid production. P. rubens is a well-characterized, highly engineered, traditional "workhorse" for the production of ß-lactam antibiotics. We integrated two plant genes encoding enzymes in the naringenin biosynthesis pathway into the genome of the secondary metabolite-deficient P. rubens 4xKO strain. After optimization of the fermentation conditions, we obtained an excellent molar yield of naringenin from fed p-coumaric acid (88%) with a titer of 0.88 mM. Along with product accumulation over 36 h, however, we also observed rapid degradation of naringenin. Based on high-resolution mass spectrometry analysis, we propose a naringenin degradation pathway in P. rubens 4xKO, which is distinct from other flavonoid-converting pathways reported in fungi. Our work demonstrates that P. rubens is a promising host for recombinant flavonoid production, and it represents an interesting starting point for further investigation into the utilization of plant biomass by filamentous fungi.