ABSTRACT
Microbial production of chemicals from renewable biomass has emerged as a crucial route for sustainable bio-manufacturing. Lignocellulose with a renewable property and wide sources is supposed to be a promising feedstock for the second-generation biorefinery. The efficient co-utilization of mixed sugars from lignocellulosic hydrolysates represents one of the key challenges in reducing the production cost. However, most microorganisms prefer glucose over xylose due to carbon catabolite repression, which constrains the efficiency of lignocellulosic conversion. Therefore, developing the microbial platforms capable of simultaneously utilizing glucose and xylose is paramount for economically viable industrial-scale production. This article reviews the key strategies and studies of metabolic engineering for promoting efficient co-utilization of glucose and xylose by microorganisms. The representative strategies include relieving glucose repression, enhancing xylose transport, constructing xylose metabolic pathways, and directed evolution.
Subject(s)
Glucose , Metabolic Engineering , Xylose , Xylose/metabolism , Metabolic Engineering/methods , Glucose/metabolism , Lignin/metabolism , Fermentation , Industrial Microbiology/methods , Catabolite Repression , Bacteria/metabolism , Bacteria/geneticsABSTRACT
Methanol, a rich one-carbon feedstock, can be massively produced from CO2 by the liquid sunshine route, which is helpful to realize carbon neutrality. ß-Farnesene is widely used in the production of polymers, surfactants, lubricants, and also serves as a suitable substitute for jet fuel. Constructing an efficient cell factory is a feasible approach for ß-farnesene production through methanol biotransformation. Here, we extensively engineered the methylotrophic yeast Ogataea polymorpha for the efficient bio-production of ß-farnesene using methanol as the sole carbon source. Our study demonstrated that sufficient supply of precursor acetyl-CoA and cofactor NADPH in an excellent yeast chassis had a 1.3-fold higher ß-farnesene production than that of wild-type background strain. Further optimization of the mevalonate pathway and enhancement of acetyl-CoA supply led to a 7-fold increase in ß-farnesene accumulation, achieving the highest reported sesquiterpenoids production (14.7 g/L with a yield of 46 mg/g methanol) from one-carbon feedstock under fed-batch fermentation in bioreactor. This study demonstrates the great potential of engineering O. polymorpha for high-level terpenoid production from methanol.
ABSTRACT
Incomplete understanding of the biosynthetic pathway of the anticancer compound Taxol hinders its production by metabolic engineering. Recent reports by Jiang et al. and other groups now describe the missing steps in Taxol biosynthesis, notably including oxetane ring formation. These findings will promote the sustainable production of Taxol through synthetic biology.
Subject(s)
Metabolic Engineering , Paclitaxel , Synthetic Biology , Paclitaxel/biosynthesis , Paclitaxel/metabolism , Synthetic Biology/methods , Metabolic Engineering/methods , Biosynthetic PathwaysABSTRACT
Ogataea (Hansenula) polymorpha is a nonconventional yeast with some unique characteristics, including fast growth, thermostability, and broad substrate spectrum. Other than common applications for protein production, O. polymorpha is attracting interest for chemical and protein production from methanol; a promising feedstock for the next-generation biomanufacturing due to its abundant sources and excellent characteristics. Benefiting from the development of synthetic biology, it has been engineered to produce value-added chemicals by extensively rewiring cellular metabolism. This Review discusses recently developed synthetic biology tools of O. polymorpha. The advances of chemicals production and systems biology were reviewed comprehensively. Finally, we look ahead to the developments of biomanufacturing in O. polymorpha to make an overall understanding of this chassis for academia and industry.
ABSTRACT
Precisely controlling gene expression is beneficial for optimizing biosynthetic pathways for improving the production. However, promoters in nonconventional yeasts such as Ogataea polymorpha are always limited, which results in incompatible gene modulation. Here, we expanded the promoter library in O. polymorpha based on transcriptional data, among which 13 constitutive promoters had the strengths ranging from 0-55% of PGAP, the commonly used strong constitutive promoter, and 2 were growth phase-dependent promoters. Subsequently, 2 hybrid growth phase-dependent promoters were constructed and characterized, which had 2-fold higher activities. Finally, promoter engineering was applied to precisely regulate cellular metabolism for efficient production of ß-elemene. The glyceraldehyde-3-phosphate dehydrogenase gene GAP was downregulated to drive more flux into pentose phosphate pathway (PPP) and then to enhance the supply of acetyl-CoA by using phosphoketolase-phosphotransacetylase (PK-PTA) pathway. Coupled with the phase-dependent expression of synthase module (ERG20â¼LsLTC2 fusion), the highest titer of 5.24 g/L with a yield of 0.037 g/(g glucose) was achieved in strain YY150U under fed-batch fermentation in shake flasks. This work characterized and engineered a series of promoters, that can be used to fine-tune genes for constructing efficient yeast cell factories.
ABSTRACT
Bio-refining lignocellulose could provide a sustainable supply of fuels and fine chemicals; however, the challenges associated with the co-utilization of xylose and glucose typically compromise the efficiency of lignocellulose conversion. Here we engineered the industrial yeast Ogataea polymorpha (Hansenula polymorpha) for lignocellulose biorefinery by facilitating the co-utilization of glucose and xylose to optimize the production of free fatty acids (FFAs) and 3-hydroxypropionic acid (3-HP) from lignocellulose. We rewired the central metabolism for the enhanced supply of acetyl-coenzyme A and nicotinamide adenine dinucleotide phosphate hydrogen, obtaining 30.0 g l-1 of FFAs from glucose, with productivity of up to 0.27 g l-1 h-1. Strengthening xylose uptake and catabolism promoted the synchronous utilization of glucose and xylose, which enabled the production of 38.2 g l-1 and 7.0 g l-1 FFAs from the glucose-xylose mixture and lignocellulosic hydrolysates, respectively. Finally, this efficient cell factory was metabolically transformed for 3-HP production with the highest titer of 79.6 g l-1 in fed-batch fermentation in mixed glucose and xylose.
Subject(s)
Glucose , Xylose , Xylose/metabolism , Glucose/metabolism , Lignin , Fermentation , Metabolic EngineeringABSTRACT
Methanol is an ideal feedstock for chemical and biological manufacturing. Constructing an efficient cell factory is essential for producing complex compounds through methanol biotransformation, in which coordinating methanol use and product synthesis is often necessary. In methylotrophic yeast, methanol utilization mainly occurs in peroxisomes, which creates challenges in driving the metabolic flux toward product biosynthesis. Here, we observed that constructing the cytosolic biosynthesis pathway resulted in compromised fatty alcohol production in the methylotrophic yeast Ogataea polymorpha. Alternatively, peroxisomal coupling of fatty alcohol biosynthesis and methanol utilization significantly improved fatty alcohol production by 3.9-fold. Enhancing the supply of precursor fatty acyl-CoA and cofactor NADPH in the peroxisomes by global metabolic rewiring further improved fatty alcohol production by 2.5-fold and produced 3.6 g/L fatty alcohols from methanol under fed-batch fermentation. We demonstrated that peroxisome compartmentalization is helpful for coupling methanol utilization and product synthesis, and with this approach, constructing efficient microbial cell factories for methanol biotransformation is feasible.
Subject(s)
Fatty Alcohols , Methanol , Fatty Alcohols/metabolism , Methanol/metabolism , Peroxisomes/metabolism , Fermentation , Metabolic Engineering/methodsABSTRACT
Bioproduction of natural products via microbial cell factories is a promising alternative to traditional plant extraction. Recently, nonconventional microorganisms have emerged as attractive chassis hosts for biomanufacturing. One such microorganism, Ogataea polymorpha is an industrial yeast used for protein expression with numerous advantages, such as thermal-tolerance, a wide substrate spectrum and high-density fermentation. Here, we systematically rewired the cellular metabolism of O. polymorpha to achieve high-level production of the sesquiterpenoid ß-elemene by optimizing the mevalonate pathway, enhancing the supply of NADPH and acetyl-CoA, and downregulating competitive pathways. The engineered strain produced 509 mg/L and 4.7 g/L of ß-elemene under batch and fed-batch fermentation, respectively. Therefore, this study identified the potential industrial application of O. polymorpha as a good microbial platform for producing sesquiterpenoids.
Subject(s)
Saccharomycetales , Sesquiterpenes , Pichia/genetics , Saccharomycetales/metabolism , Sesquiterpenes/metabolism , Metabolic EngineeringABSTRACT
Auxotrophic marker genes have been widely used for genetic engineering in yeast. However, the effects of amino acids or nucleotides deficiency in auxotrophic strains on cell growth and product synthesis were rarely reported. In this study, a total of eight auxotrophic strains of Saccharomyces cerevisiae with single knockout of selection markers were obtained. Cell growth and free fatty acid (FFA) production of these auxotrophic strains were evaluated with supplementation of different concentrations of amino acids or nucleotides. Generally, except ade2Δ mutants, most auxotrophic strains showed decreased cell growth and FFA production, which could be recovered by adding higher concentrations of supplements. LEU2 deletion (leu2Δ) damaged both cell growth and FFA production even with supplementation of 1000 mg L-1 leucine. This study shows that growth and product biosynthesis of auxotrophs could be limited by insufficient supplementation of amino acids or nucleotides, and provides guidance on supplementation of these nutrients during fermentation to maximize cell growth and product biosynthesis.
Subject(s)
Saccharomyces cerevisiae Proteins , Saccharomyces cerevisiae , Saccharomyces cerevisiae/metabolism , Fatty Acids/metabolism , Saccharomyces cerevisiae Proteins/genetics , Saccharomyces cerevisiae Proteins/metabolism , Fermentation , Amino Acids/metabolismABSTRACT
BACKGROUND: Construction of efficient microbial cell factories is one of the core steps for establishing green bio-manufacturing processes. However, the complex metabolic regulation makes it challenging in driving the metabolic flux toward the product biosynthesis. Dynamically coupling the biosynthetic pathways with the cellular metabolism at spatial-temporal manner should be helpful for improving the production with alleviating the cellular stresses. RESULTS: In this study, we observed the mismatch between fatty alcohol biosynthesis and cellular metabolism, which compromised the fatty alcohol production in Saccharomyces cerevisiae. To enhance the fatty alcohol production, we spatial-temporally regulated fatty alcohol biosynthetic pathway by peroxisomal compartmentalization (spatial) and dynamic regulation of gene expression (temporal). In particular, fatty acid/acyl-CoA responsive promoters were identified by comparative transcriptional analysis, which helped to dynamically regulate the expression of acyl-CoA reductase gene MaFAR1 and improved fatty alcohol biosynthesis by 1.62-fold. Furthermore, enhancing the peroxisomal supply of acyl-CoA and NADPH further improved fatty alcohol production to 282 mg/L, 2.52 times higher than the starting strain. CONCLUSIONS: This spatial-temporal regulation strategy partially coordinated fatty alcohol biosynthesis with cellular metabolism including peroxisome biogenesis and precursor supply, which should be applied for production of other products in microbes.
ABSTRACT
3-Hydroxypropionate (3-HP) is a platform chemical for production of acrylic acid, acrylamide and biodegradable polymers. Several microbial cell factories have been constructed for production of 3-HP from malonyl-CoA by using a malonyl-CoA reductase, which however suffer from inadequate supply of precursor and cofactor. Here 3-HP biosynthesis was optimized in a super yeast chassis with sufficient supply of precursor malonyl-CoA and cofactor NADPH, which had a 3-fold higher 3-HP (1.4 g/L) than that of wild-type background. The instability of the engineered strain was observed in fed-batch fermentation due to the plasmid loss, which may be caused by the toxic intermediate malonate semialdehyde. Genome integration of MCR-C encoding C-terminal of MCR enabled stable gene expression and much higher 3-HP production of 4.4 g/L under batch fermentation and 56.5 g/L under fed-batch fermentation with a yield of 0.31 g/g glucose. This was the highest 3-HP production reported from glucose in engineered microbes.
Subject(s)
Malonyl Coenzyme A , Saccharomyces cerevisiae , Glucose/metabolism , Lactic Acid/analogs & derivatives , Malonyl Coenzyme A/metabolism , Metabolic Engineering , Saccharomyces cerevisiae/genetics , Saccharomyces cerevisiae/metabolismABSTRACT
Methanol is an ideal feedstock for biomanufacturing that can be beneficial for global carbon neutrality; however, the toxicity of methanol limits the efficiency of methanol metabolism toward biochemical production. We here show that engineering production of free fatty acids from sole methanol results in cell death with decreased cellular levels of phospholipids in the methylotrophic yeast Ogataea polymorpha, and cell growth is restored by adaptive laboratory evolution. Whole-genome sequencing of the adapted strains reveals that inactivation of LPL1 (encoding a putative lipase) and IZH3 (encoding a membrane protein related to zinc metabolism) preserve cell survival by restoring phospholipid metabolism. Engineering the pentose phosphate pathway and gluconeogenesis enables high-level production of free fatty acid (15.9 g l-1) from sole methanol. Preventing methanol-associated toxicity underscores the link between lipid metabolism and methanol tolerance, which should contribute to enhancing methanol-based biomanufacturing.
Subject(s)
Methanol , Pichia , Cell Death , Fatty Acids/metabolism , Methanol/metabolism , Pentose Phosphate Pathway , Pichia/metabolismABSTRACT
Methylotrophic yeasts have been widely recognized as a promising host for production of recombinant proteins and value-added chemicals. Promoters for controlled gene expression are critical for construction of efficient methylotrophic yeasts cell factories. Here, we summarized recent advances in characterizing and engineering promoters in methylotrophic yeasts, such as Komagataella phaffii and Ogataea polymorpha. Constitutive and inducible promoters controlled by methanol or other inducers/repressors were introduced to demonstrate their applications in production of proteins and chemicals. Furthermore, efforts of promoter engineering, including site-directed mutagenesis, hybrid promoter, and transcription factor regulation to expand the promoter toolbox were also summarized. This mini-review also provides useful information on promoters for the application of metabolic engineering in methylotrophic yeasts. KEY POINTS: ⢠The characteristics of six methylotrophic yeasts and their promoters are described. ⢠The applications of Komagataella phaffii and Ogataea polymorpha in metabolic engineeringare expounded. ⢠Three promoter engineering strategies are introduced in order to expand the promoter toolbox.
Subject(s)
Metabolic Engineering , Saccharomycetales , Pichia/genetics , Pichia/metabolism , Saccharomycetales/genetics , Yeasts/geneticsABSTRACT
Advances in synthetic biology enable microbial hosts to synthesize valuable natural products in an efficient, cost-competitive and safe manner. However, current engineering endeavors focus mainly on enzyme engineering and pathway optimization, leaving the role of cofactors in microbial production of natural products and cofactor engineering largely ignored. Here we systematically engineered the supply and recycling of three cofactors (FADH2, S-adenosyl-L-methion and NADPH) in the yeast Saccharomyces cerevisiae, for high-level production of the phenolic acids caffeic acid and ferulic acid, the precursors of many pharmaceutical molecules. Tailored engineering strategies were developed for rewiring biosynthesis, compartmentalization and recycling of the cofactors, which enabled the highest production of caffeic acid (5.5 ± 0.2 g l-1) and ferulic acid (3.8 ± 0.3 g l-1) in microbial cell factories. These results demonstrate that cofactors play an essential role in driving natural product biosynthesis and the engineering strategies described here can be easily adopted for regulating the metabolism of other cofactors.
Subject(s)
Biological Products , Saccharomyces cerevisiae , Biological Products/metabolism , Caffeic Acids/metabolism , Hydroxybenzoates , Metabolic Engineering/methods , Saccharomyces cerevisiae/genetics , Saccharomyces cerevisiae/metabolismABSTRACT
Fatty acids (FA) are widely used as feed stocks for the production of cosmetics, personal hygiene products, lubricants and biofuels. Ogataea polymorpha is considered as an ideal chassis for bio-manufacturing, due to its outstanding characteristics such as methylotroph, thermal-tolerance and wide substrate spectrum. In this study, we harnessed O. polymorpha for overproduction of fatty acids by engineering its fatty acid metabolism and optimizing the fermentation process. The engineered strain produced 1.86 g/L FAs under the optimized shake-flask conditions (37â, pH 6.4, a C/N ratio of 120 and an OD600 of seed culture of 6-8). The fed-batch fermentation process was further optimized by using a dissolved oxygen (DO) control strategy. The C/N ratio of initial medium was 17.5, and the glucose medium with a C/N ratio of 120 was fed when the DO was higher than 30%. This operation resulted in a titer of 18.0 g/L FA, indicating the potential of using O. polymorpha as an efficient cell factory for the production of FA.
Subject(s)
Fatty Acids , Saccharomycetales , Culture Media , Fermentation , Metabolic Engineering , Saccharomycetales/genetics , Saccharomycetales/metabolismABSTRACT
Bio-manufacturing via microbial cell factory requires large promoter library for fine-tuned metabolic engineering. Ogataea polymorpha, one of the methylotrophic yeasts, possesses advantages in broad substrate spectrum, thermal-tolerance, and capacity to achieve high-density fermentation. However, a limited number of available promoters hinders the engineering of O. polymorpha for bio-productions. Here, we systematically characterized native promoters in O. polymorpha by both GFP fluorescence and fatty alcohol biosynthesis. Ten constitutive promoters (P PDH , P PYK , P FBA , P PGM , P GLK , P TRI , P GPI , P ADH1 , P TEF1 and P GCW14 ) were obtained with the activity range of 13%-130% of the common promoter P GAP (the promoter of glyceraldehyde-3-phosphate dehydrogenase), among which P PDH and P GCW14 were further verified by biosynthesis of fatty alcohol. Furthermore, the inducible promoters, including ethanol-induced P ICL1 , rhamnose-induced P LRA3 and P LRA4 , and a bidirectional promoter (P Mal -P Per ) that is strongly induced by sucrose, further expanded the promoter toolbox in O. polymorpha. Finally, a series of hybrid promoters were constructed via engineering upstream activation sequence (UAS), which increased the activity of native promoter P LRA3 by 4.7-10.4 times without obvious leakage expression. Therefore, this study provided a group of constitutive, inducible, and hybrid promoters for metabolic engineering of O. polymorpha, and also a feasible strategy for rationally regulating the promoter strength.
ABSTRACT
Energy shortage and environmental concern urgently require establishing the feasible bio-refinery process from various feedstocks. The methylotrophic yeast Ogataea polymorpha is thermo-tolerant and can utilize various carbon sources, such as glucose, xylose and methanol, which makes it a promising host for bio-manufacturing. Here, we explored the capacity of O. polymorpha for overproduction of free fatty acids (FFAs) from multiple substrates. The engineered yeast produced 674 mg/L FFA from 20 g/L glucose in shake flask and could sequentially utilize the mixture of glucose and xylose. However, the FFA producing strain failed to survive in sole methanol and supplementing co-substrate xylose promoted methanol metabolism. A synergistic utilization of xylose and methanol was observed in the FFA producing strain. Finally, a mixture of glucose, xylose and methanol was evaluated for FFA production (1.2 g/L). This study showed that O. polymorpha is an ideal host for chemical production from various carbon sources.
ABSTRACT
Promoters play an important role in regulating gene expression, and construction of microbial cell factories requires multiple promoters for balancing the metabolic pathways. However, there are only a limited number of characterized promoters for gene expression in the methylotrophic yeast Ogataea polymorpha, which hampers the extensive harnessing of this important yeast toward a cell factory. Here we characterized the promoters of methanol utilization pathway, precursor supply pathway, and reactive oxygen species (ROS) defense system, by using a green fluorescence protein variant (GFPUV) as a quantification signal. Finally, the characterized promoters were used for tuning a fatty alcohol biosynthetic pathway in O. polymorpha and realized fatty alcohol production from methanol. This promoter box should be helpful for gene expression and pathway optimization in the methylotrophic yeast O. polymorpha. KEY POINTS : ⢠22 promoters related to methanol metabolism were characterized in O. polymorpha. ⢠Promoter truncation resulted shorter and compact promoters. ⢠Promoters with various strengths were used for regulating a fatty alcohol biosynthesis from methanol.
Subject(s)
Metabolic Engineering , Methanol , Pichia/genetics , Promoter Regions, Genetic , SaccharomycetalesABSTRACT
Methylotrophic yeast Ogataea polymorpha is capable to utilize multiple carbon feedstocks especially methanol as sole carbon source and energy, making it an ideal host for bio-manufacturing. However, the lack of gene integration sites limits its systems metabolic engineering, in particular construction of genome-integrated pathway. We here screened the genomic neutral sites for gene integration without affecting cellular fitness, by genomic integration of an enhanced green fluorescent protein (eGFP) gene via CRISPR-Cas9 technique. After profiling the growth and fluorescent intensity in various media, 17 genome positions were finally identified as potential neutral sites. Finally, integration of fatty alcohol synthetic pathway genes into neutral sites NS2 and NS3, enabled the production of 4.5 mg/L fatty alcohols, indicating that these neutral sites can be used for streamline metabolic engineering in O. polymorpha. We can anticipate that the neutral sites screening method described here can be easily adopted to other eukaryotes.