ABSTRACT
Leptin has important roles in numerous physiological functions, including those in the regulation of energy balance, and in immune and reproductive systems. However, in the recent years, evidence has implicated it in a number of obesity-related diseases, where its concentrations in serum are significantly elevated. Elevated serum leptin concentrations and increased placental leptin secretion have been reported in women with hypertensive disorders of pregnancy. Whether leptin is responsible for this disorder remains to be established. Leptin injections in healthy rats and mice during pregnancy result in endothelial activation, increased blood pressure and proteinuria. A potential role for leptin in the pathogenesis of pre-eclampsia is hypothesised, particularly in women who are overweight or obese where serum leptin concentrations are often elevated. This review summarises pertinent information in the literature on the role of leptin in puberty, pregnancy, and hypertensive disorders of pregnancy. In particular, the possible mechanism that may be involved in leptin-induced increase in blood pressure and proteinuria during pregnancy and the potential role of marinobufagenin in this disease entity. We hypothesise a significant role for oxidative stress in this, and propose a conceptual framework on the events that lead to endothelial activation, raised blood pressure and proteinuria following leptin administration.
Subject(s)
Leptin , Leptin/metabolism , Pregnancy , Female , Humans , Animals , Reproduction/physiology , Hypertension, Pregnancy-Induced/metabolism , Hypertension, Pregnancy-Induced/physiopathology , Hypertension/metabolism , Hypertension/physiopathology , Blood Pressure/physiology , Pre-Eclampsia/metabolism , Pre-Eclampsia/physiopathologyABSTRACT
Environmental pollutants like chlorophenol chemicals and their derivatives are commonplace. These compounds serve as building blocks in the production of medicines, biocides, dyes, and agricultural chemicals. Chlorophenols enter the environment through several different pathways, including the breakdown of complex chlorinated hydrocarbons, industrial waste, herbicides, and insecticides. Chlorophenols are destroyed thermally and chemically, creating dangerous chemicals that pose a threat to public health. Water in particular is affected, and thorough monitoring is required to find this source of pollution because it can pose a major hazard to both human and environmental health. For the detection of chlorophenols, molecularly imprinted polymers (MIPs) have been incorporated into a variety of electrochemical sensing systems and assay formats. Due to their long-term chemical and physical stability as well as their simple and affordable synthesis process, MIPs have become intriguing synthetic alternatives over the past few decades. In this review, we concentrate on the commercial potential of the MIP technology. Additionally, we want to outline the most recent advancements in their incorporation into electrochemical sensors with a high commercial potential for detecting chlorophenols.
Subject(s)
Chlorophenols , Electrochemical Techniques , Molecularly Imprinted Polymers , Chlorophenols/analysis , Chlorophenols/chemistry , Molecularly Imprinted Polymers/chemistry , Electrochemical Techniques/methods , Humans , Environmental Pollutants/analysisABSTRACT
In this study, nickel selenide (NiSe), Ag/C3N4-NiSe, and C3N4/Ag-NiSe nanowires (NWs) were synthesized via coprecipitation. The prepared NWs were employed for the degradation of the rhodamine B (RhB) dye in the absence of light using sodium borohydride (NaBH4), bactericidal activity against pathogenic Staphylococcus aureus (S. aureus) and in silico docking study to investigate the d-alanine ligase (DDl) and deoxyribonucleic acid (DNA) gyrase of S. aureus. NWs demonstrate a catalytic degradation efficiency of 69.58% toward RhB in a basic medium. The percentage efficacy of the synthesized materials was evaluated as 19.12-42.62% at low and 36.61-49.72% at high concentrations against pathogenic S. aureus. Molecular docking results suggest that both C3N4/Ag-doped NiSe and Ag/C3N4-doped NiSe possess inhibitory activities toward DDl and DNA gyrase of S. aureus, which coincides with the in vitro bactericidal activity. Based on the research outcomes, the synthesized NWs show potential as an effective agent for water purification and resistance to microbial contaminants.
ABSTRACT
Because of the serious risks they pose to the environment and public health, chlorophenols (CPs), a typical class of the most persistent organic pollutants, have drawn increasing attention. Monitoring CPs effectively has become a pressing and difficult problem. The rapidly increasing need for onsite and real-time CP detection has led to the consideration of electrochemical sensing as a workable solution. Molecularly imprinted polymer (MIP)-based electrochemical sensing has emerged as a promising area for environmental monitoring in response to this analytical problem. MIPs, in conjunction with miniature electrochemical transducers, provide the opportunity to detect target analytes in situ. These devices have the advantages of great chemical and physical stability, cheap production costs, good selectivity, and quick response times. Most studies suggest that these sensors use nanoparticles to improve their analytical properties, especially sensitivity. Furthermore, these sensors have successfully used real water samples without the need for time-consuming pretreatment procedures. This article provides an overview of electrochemical MIP-based sensors reported to detect CPs in water samples. To obtain the highest sensitivity, special consideration is given to the fabrication of the sensors, which includes the use of various functional monomers, sensing platforms, and materials. Several other parameters are also discussed, including the linear concentration range, limit of detection, and the types of water samples that were examined.
ABSTRACT
Some hexahydroquinoline candidates were prepared by reacting 2-amino-3-cyano-1-cyclohexylhexahydroquinoline with oxalyl chloride and triethyl orthoformate. The computational chemical approach agreed with the product-testing results. The produced substances were examined in vitro for their antiproliferative activity against liver carcinoma (HepG2), breast adenocarcinoma (MCF7), prostate cancer (PC3), and colon cancer (HCT116) cell lines. The highest potency against the four cell lines was exhibited by hydrazide, thiosemicarbazide, and thiazolidinone derivatives. The best docking score was presented by thiosemicarbazide and thiazolidinone derivatives as they showed the highest binding to the Mcl-1 enzyme with binding energies of -8.97 and -8.90 kcal mol-1, respectively, which were higher than that of the co-crystallized ligand (LC3) with a binding energy of -8.74 kcal mol-1. Besides, the modeling pharmacokinetics disclosed their desirable drug-likeness and oral bioavailability characteristics.
ABSTRACT
INTRODUCTION: Sex estimation is crucial in forensic anthropology. In situations such as mass disasters, and forensic anthropology cases, sex estimation is a very important initial step in the disaster victim identification process. Literature has acknowledged that sex estimation is population-specific. However, sex estimation standards in South-East Asian populations are limited, leading to the usage of most Thais discriminant function equations on sex estimation by other South-East Asian countries including Malaysia. This systematic review was conducted to summarise the findings of sex estimation studies in South-East Asian countries. MATERIALS AND METHODS: A systematic literature search was performed through the SCOPUS database and Web of Science (WOS) database for relevant studies between 2014 and 2022. All published articles that are related to sex estimation from different types of bone, methods, landmarks, and sample sources (i.e., photographs, dry bones, and CT images) were included in this review. The main inclusion criteria were studies on (i) sex estimation; (ii) in South-East Asian populations; (iii) between the years 2014 and 2022; and (iv) in English. RESULTS: The literature search identified 30 potentially relevant studies, of which 15 publications met all the inclusion criteria. From those research, 13 studies were related to the Thai population and two to the Malaysian population. Only one study was based on morphological traits, while the rest were based on a morphometric approach. CONCLUSION: All studies found that sex estimation is populationspecific. Therefore, further research is recommended to explore more on population-specific sex estimation using different parts of bone.
Subject(s)
Forensic Anthropology , Humans , Female , Male , Asia, Southeastern/ethnology , Forensic Anthropology/methods , Sex Determination by Skeleton/methods , East Asian PeopleABSTRACT
Understanding the pharmacokinetics of gentamicin is essential in special populations, such as pediatric patients with acute lymphoblastic leukemia (ALL), in light of previous studies indicating that ALL patients have a lower volume of distribution than non-ALL patients. Furthermore, validation of such results is needed to ensure their clinical application. Accordingly, this single-center, retrospective, cross-sectional study compares the pharmacokinetic parameters of volume of distribution and clearance (Cl) of gentamicin between ALL and non-ALL patients. Inclusion criteria were pediatric patients aged between 1 and 14 years with or without ALL and receiving intravenous gentamicin for treatment courses > 72 h. Patients' characteristics, such as age, sex, height, serum albumin, diagnosis, serum creatinine (Scr) concentration, dosing, and pharmacokinetic information, including peak and trough concentrations, were retrieved. The study scrutinized a total of 115 pediatric patients, comprising toddlers (15.7 %), children (76.5 %), and adolescents (7.8 %). All patients received gentamicin every 8 h, with an average dose of 2.50 (0.64) mg/kg. Patients were divided into two groups based on disease state, with 45.2 % (n = 52) in the non-ALL group and 54.8 % (n = 63) in the ALL group. Both groups had similar characteristics in terms of gender, weight, body surface area, and dose. The only significant covariates identified were weight and creatinine clearance (Clcr) for volume of distribution (Vd). A significant difference was found in Scr, Clcr, and blood urea nitrogen (BUN); however, no significant difference between ALL and non-ALL patients emerged in the volume of distribution or Cl. In conclusion, the study findings indicate that dosing requirements were similar between the two groups. Further prospective studies with larger sample sizes are warranted.
ABSTRACT
A paper-based analytical device (PAD) with an integrated composite electrode has been designed and fabricated for non-enzymatic creatinine sensing. Reduced graphene oxide (rGO) was employed to modify the PAD so that it could function as a solid-contact transducer. A new macrocyclic pyrido-hexapeptide derivative was made and used as a special ionophore in the creatinine membrane sensor. The synthesized PAD showed a detection limit of 1.0 µM (S/N = 3) and a potentiometric response towards creatinine throughout a log-linear range of 2.0 µM-10 mM (R2 = 0.9998). The sensor shows significant selectivity for a few related substances, including ephedrine, codeine, ketamine, caffeine, urea, urate, carbinoxamine, and dextromethorphan. It has been established that the testing method is appropriate for the direct potentiometric detection of creatinine in a variety of human urine sample types. When an indicating electrode and a reference electrode are put on the same flexible disposable, this lets applications with a small sample volume be done. For point-of-care creatinine measurement, the developed paper-based analytical equipment is a good choice because it is affordable, easily accessible, and self-pumping (especially when combined with potentiometric detection).
Subject(s)
Urinalysis , Humans , Creatinine , Potentiometry , ElectrodesABSTRACT
Microplastics (5 µm) are a developing threat that contaminate every environmental compartment. The detection of these contaminants is undoubtedly an important topic of study because of their high potential to cause harm to ecosystems. For many years, scientists have been assiduously striving to surmount the obstacle of detection restrictions and minimize the likelihood of receiving results that are either false positives or false negatives. This study covers the current state of electrochemical sensing technology as well as its application as a low-cost analytical platform for the detection and characterization of novel contaminants. Examples of detection mechanisms, electrode modification procedures, device configuration, and performance are given to show how successful these approaches are for monitoring microplastics in the environment. Additionally included are the recent developments in nanoimpact techniques. Compared to electrochemical methods for microplastic remediation, the use of electrochemical sensors for microplastic detection has received very little attention. With an overview of microplastic electrochemical sensors, this review emphasizes the promise of existing electrochemical remediation platforms toward sensor design and development. In order to enhance the monitoring of these substances, a critical assessment of the requirements for future research, challenges associated with detection, and opportunities is provided. In addition to-or instead of-the now-in-use laboratory-based analytical equipment, these technologies can be utilized to support extensive research and manage issues pertaining to microplastics in the environment and other matrices.
ABSTRACT
It is crucial for early stage medical diagnostics to identify disease biomarkers at ultralow concentrations. A wide range of analytes can be identified using low-dimensional materials to build highly sensitive, targeted, label-free, field-effect transistor (FET) biosensors. Two-dimensional (2D) materials are preferable for high-performance biosensing because of their dramatic change in resistivity upon analyte adsorption or biomarker detection, tunable electronic properties, high surface activities, adequate stability, and layer-dependent semiconducting properties. We give a succinct overview of interesting applications for protein sensing with various architectural styles, such as 2D transition metal dichalcogenides (TMDs)-based FETs that include carbon nanotubes (CNTs), graphene (Gr), reduced graphene oxide (rGr), 2D transition-metal carbides (MXene), and Gr/MXene heterostructures. Because it might enable individuals to perform better, this review will be an important contribution to the field of medical science. These achievements demonstrate point-of-care diagnostics' abilities to detect biomarkers at ultrahigh performance levels. A summary of the present opportunities and challenges appears in the conclusion.
Subject(s)
Nanostructures , Nanotubes, Carbon , Nitrites , Transition Elements , Humans , Nanotubes, Carbon/chemistry , Nanostructures/chemistry , Transition Elements/chemistry , BiomarkersABSTRACT
The harmful cationic dyes present in industrial waste significantly decrease the effectiveness of remedy operations. Considering the horrendous impact of these dyes on the environment and biodiversity, silver bromide (AgBr) and chitosan (CS) doped copper ferrite (CuFe2O4) nanostructures (NSs) were prepared by the co-precipitation route. In this work, The surface characteristics of CuFe2O4 can be altered by CS, potentially enhancing its catalytic reaction compatibility. The functional groups in CS interact with the surface of CuFe2O4, influencing its catalytic behavior. AgBr can have an impact on the dynamics of charge carriers in the composite. Better charge separation and transfer which is essential for catalytic processes. The catalytic degradation of RhB was significantly enhanced (100 %) using 4 wt% of AgBr-doped CS-CuFe2O4 catalysts in a basic medium. The significant inhibitory zones (9.25 to 17.95 mm) inhibitory in maximum doses were seen against Gram-positive bacteria (S. aureus). The bactericidal action of AgBr/CS-doped CuFe2O4 NSs against DNA gyraseS.aureus and tyrosyl-tRNAsynthetase S. aureus was rationalized using molecular docking studies, which supported their function as inhibitors.
Subject(s)
Chitosan , Molecular Docking Simulation , Rhodamines , Staphylococcus aureus , Coloring AgentsABSTRACT
In this study, BaZr0.87Y0.1M0.03O3-δ perovskite electrolytes with sintering aids (M = Mn, Co, and Fe) were synthesized by a sustainable approach using spinach powder as a chelating agent and then compared with chemically synthesized BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) electrolytes for intermediate temperature SOFCs. This is the first example of such a sustainable synthesis of perovskite materials with sintering aids. Structural analysis revealed the presence of a cubic perovskite structure in BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) samples synthesized by both green and conventional chemical methods. No significant secondary phases were observed in the samples synthesized by a sustainable approach. The observed phenomena of plane shift were because of the disparities between ionic radii of the dopants, impurities, and host materials. The surface morphology analysis revealed a denser microstructure for the electrolytes synthesized via green routes due to metallic impurities in the organic chelating agent. The absence of significant impurities was also observed by compositional analysis, while functional groups were identified through Fourier-transform infrared spectroscopy. Conductivity measurements showed that BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) electrolytes synthesized by oxalic acid have higher conductivities compared to BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) electrolytes synthesized by the green approach. The button cells employing BaZr0.87Y0.1Co0.03O3-δ electrolytes synthesized by the chemical and green routes achieved peak power densities 344 and 271 mW·cm-2 respectively, suggesting that the novel green route can be applied to synthesize SOFC perovskite materials with minimal environmental impact and without significantly compromising cell performance.
ABSTRACT
In this work, we address two concerns at once: waste reduction and the development of a lead removal adsorbent. The potential of Lupinus albus seed hull (LSH) powder as an efficient, innovative, and economical adsorbent for Pb(II) absorption was examined in this study. Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy investigations were used to determine the structural and morphological properties of the LSH adsorbent. The adsorption process was studied in batch mode with multiple process variables (adsorbent dosage of 4.0-20 g/L; solution pH of 1.5-5.5; contact time of 15-70 min). By fitting the equilibrium data to the Langmuir isotherm model, the maximum adsorption capacity of Pb(II) was 357.14 mg/g at optimized pH (5.5), LSH dose (0.4 g), and interaction time (60 min) with starting Pb(II) concentration of 50 mg L-1. As for the reaction kinetics, the pseudo-second-order model was shown to be a convenient match. LSH can be reused after four desorption/adsorption cycles and has a high potential for eliminating Pb(II) from wastewater.
ABSTRACT
Identification of regulators of Toxoplasma gondii bradyzoite development and cyst formation is the most direct way to address the importance of parasite development in long-term persistence and reactivation of this parasite. Here we show that a T. gondii gene (named Regulator of Cystogenesis 1; ROCY1) is sufficient for T. gondii bradyzoite formation in vitro and in vivo. ROCY1 encodes an RNA binding protein that has a preference for 3' regulatory regions of hundreds of T. gondii transcripts, and its RNA-binding domains are required to mediate bradyzoite development. Female mice infected with ΔROCY1 parasites have reduced (>90%) cyst burden. While viable parasites can be cultivated from brain tissue for up to 6 months post-infection, chronic brain-resident ΔROCY1 parasites have reduced oral infectivity compared to wild type. Despite clear defects in bradyzoite formation and oral infectivity, ΔROCY1 parasites were able to reactivate with similar timing and magnitude as wild type parasites for up to 5 months post-infection. Therefore while ROCY1 is a critical regulator of the bradyzoite developmental pathway, it is not required for parasite reactivation, raising new questions about the persisting life stage responsible for causing recrudescent disease.
Subject(s)
Toxoplasma , Female , Animals , Mice , Toxoplasma/metabolism , Gene Regulatory Networks , Neoplasm Recurrence, Local , Brain/metabolism , Protozoan Proteins/genetics , Protozoan Proteins/metabolismABSTRACT
Curcumin (diferuloylmethane), the primary curcuminoid in turmeric rhizome, has been acknowledged as a bioactive compound for numerous pharmacological activities. Nonetheless, the hydrophobic nature, rapid metabolism, and physicochemical and biological instability of this phenolic compound correspond to its poor bioavailability. So, recent scientific advances have found many components and strategies for enhancing the bioavailability of curcumin with the inclusion of biotechnology and nanotechnology to address its existing limitations. Therefore, In this study, copolymerized aqua-gel was synthesized by graft polymerization of poly-acrylic acid (P-AA) on cellulose nanocrystals (CNC), after that Curcuma longa (Cur) was incorporated as dopant (5, 10, 15, and 25 mg) in hydrogel (Cur/C-P) as a stabilizing agent for evaluation of bacterial potential and sewage treatment. The antioxidant tendency of 25 mg Cur/C-P was much higher (72.21 %) than other samples and displayed a catalytic activity of up to 93.89 % in acidic conditions and optimized bactericidal inclinations toward gram-positive bacterial strains. Furthermore, ligand binding was conducted against targeted protein enoyl-[acylcarrier-protein] reductase (FabI) enzyme to comprehend the putative mechanism of microbicidal action of CNC-PAA (CP), Cur/C-P, and curcumin. Our outcomes suggest that 25 mg Cur/C-P hydrogels are plausible sources for hybrid, multifunctional biological activity.
Subject(s)
Curcumin , Curcumin/chemistry , Curcuma/chemistry , Molecular Docking Simulation , Cellulose/metabolism , Hydrogels/metabolism , CatalysisABSTRACT
BACKGROUND: Kartagener syndrome (KS) is recognized as an inherited, autosomal recessive disorder characterized by a combination of chronic sinusitis, bronchiectasis, and situs inversus. It affects one in 12,500-50,000 live births worldwide. AIM: This paper aims to discuss the dental management of patients diagnosed with KS. CASE REPORT: A 31-year-old male with KS manifests by impaired cilia motility which increases the risk of a frequent lung infection. The dental examination revealed that the patient required comprehensive oral hygiene care which included patient education and nonsurgical periodontal therapy under local anesthesia. CONCLUSIONS: Dental care providers should ask affected patients with KS about their signs and symptoms of cardiac and pulmonary disease and seek consultation with their attending physician regarding these health concerns before the initiation of general anesthesia and perhaps conscious sedation administration. Patients with KS with emerging cardiac and/or respiratory impairment should be referred promptly for medical assessment.
ABSTRACT
Herein, Bi2O3 quantum dots (QDs) have been synthesized and doped with various concentrations of graphitic carbon nitride (g-C3N4) and a fixed amount of carbon spheres (CS) using a co-precipitation technique. XRD analysis confirmed the presence of monoclinic structure along the space group P21/c and C2/c. Various functional groups and characteristic peaks of (Bi-O) were identified using FTIR spectra. QDs morphology of Bi2O3 showed agglomeration with higher amounts of g-C3N4 by TEM analysis. HR-TEM determined the variation in the d-spacing which increased with increasing dopants. These doping agents were employed to reduce the exciting recombination rate of Bi2O3 QDs by providing more active sites which enhance antibacterial activity. Notably, (6 wt%) g-C3N4/CS-doped Bi2O3 exhibited considerable antimicrobial potential in opposition to E. coli at higher values of concentrations relative to ciprofloxacin. The (3 wt%) g-C3N4/CS-doped Bi2O3 exhibits the highest catalytic potential (97.67%) against RhB in a neutral medium. The compound g-C3N4/CS-Bi2O3 has been suggested as a potential inhibitor of ß-lactamaseE. coli and DNA gyraseE. coli based on the findings of a molecular docking study that was in better agreement with in vitro bactericidal activity.
ABSTRACT
Manganese dioxide (MnO2) nanorods and (3, 6, and 9 mL) chitosan grafted polyacrylic acid (CS-g-PAA) doped MnO2 were prepared hydrothermally. The study objective is to decrease the recombination rate of MnO2 upon doping to enhance the dye degradation efficiency and antimicrobial activity. The doping-dependent properties of CS-g-PAA on phase identification, functional groups, optical characteristics, elemental compositions, and morphological analyses of MnO2 nanorods were conducted using systematic characterization techniques. XRD pattern shows that MnO2 has a tetragonal structure, with increased crystallite size (15.87 to 29.36 nm) upon doping. The TEM analysis showed that MnO2 has nanorods and that CS-g-PAA doped MnO2 displayed nanoflakes-like structures. The decrease in electron-hole pair recombination rate on doping was verified by PL spectroscopy, demonstrating the enhanced catalytic activity. Moreover, adding grafted binary polymers to MnO2 inhibits bacterial cell growth by binding with the negatively charged cell wall and preventing biofilm formation. The 9 mL doped sample displayed a maximum degradation (99.27 %) in a neutral medium and 85.84 % antimicrobial efficiency against E. coli. The enoyl-acyl carrier protein reductase (FabIE. coli) and DNA gyrase(E. coli) were inhibited by these CS-g-PAA doped MnO2 nanostructures (NSs), as shown by in silico molecular docking studies.
ABSTRACT
Background Ferulic acid is a natural compound commonly found in fruits and vegetables like tomatoes, sweet corn, rice bran, and dong quai. It has various beneficial effects on the body, such as anti-inflammatory, anti-apoptotic, hepatoprotective, cardioprotective, and neuroprotective properties. Aims We conducted a study to investigate the antitumor activity of ferulic acid against Ehrlich solid carcinoma (ESC), specifically by affecting hypoxia-inducible factor (HIF)-1α and its subsequent effects on other factors like nuclear factor erythroid 2-related factor 2 (Nrf2), heme oxygenase-1 (HO-1), cellular Myc (cMyc), cyclin D1, mammalian target of rapamycin (mTOR), and signal transducer and activator of transcription 3 (STAT3). Materials and methods The study involved implanting rats with ESC cells and administering 50 mg/kg of ferulic acid orally daily for eight days. Sections of the muscles with ESC were stained with toluidine blue or immunostained with anti-HIF-1α antibodies. The tumor samples were used to evaluate the expression of HIF-1α, Nrf2, HO-1, cMyc, cyclin D1, mTOR, and STAT3. Results Ferulic acid increased mean survival time, reduced tumor volume and weight, and improved the appearance of the tumor tissue. Furthermore, ferulic acid significantly elevated the expression of Nrf2 and HO-1, while reducing the expression of HIF-1α, Nrf2, HO-1, cMyc, cyclin D1, mTOR, and STAT3. Conclusions Ferulic acid can reduce tumor size and weight while improving the structure of muscle cells, suggesting it may have antineoplastic activity against ESC. Further investigation revealed that ferulic acid downregulates HIF-1α, increasing the expression of antioxidant proteins Nrf2 and HO-1. Additionally, ferulic acid decreases the expression of proliferation markers cMyc and cyclin D1 and downregulates cellular regulators mTOR and STAT3.
ABSTRACT
The high hydrogen storage capacity (10.5 wt.%) and release of hydrogen at a moderate temperature make LiAlH4 an appealing material for hydrogen storage. However, LiAlH4 suffers from slow kinetics and irreversibility. Hence, LaCoO3 was selected as an additive to defeat the slow kinetics problems of LiAlH4. For the irreversibility part, it still required high pressure to absorb hydrogen. Thus, this study focused on the reduction of the onset desorption temperature and the quickening of the desorption kinetics of LiAlH4. Here, we report the different weight percentages of LaCoO3 mixed with LiAlH4 using the ball-milling method. Interestingly, the addition of 10 wt.% of LaCoO3 resulted in a decrease in the desorption temperature to 70 °C for the first stage and 156 °C for the second stage. In addition, at 90 °C, LiAlH4 + 10 wt.% LaCoO3 can desorb 3.37 wt.% of H2 in 80 min, which is 10 times faster than the unsubstituted samples. The activation energies values for this composite are greatly reduced to 71 kJ/mol for the first stages and 95 kJ/mol for the second stages compared to milled LiAlH4 (107 kJ/mol and 120 kJ/mol for the first two stages, respectively). The enhancement of hydrogen desorption kinetics of LiAlH4 is attributed to the in situ formation of AlCo and La or La-containing species in the presence of LaCoO3, which resulted in a reduction of the onset desorption temperature and activation energies of LiAlH4.