ABSTRACT
Scalable micro graphene Hall sensors (µGHSs) hold tremendous potential for highly sensitive and label-free biomagnetic sensing in physiological solutions. To enhance the performance of these devices, it is crucial to optimize frequency-dependent flicker noise to reduce the limit of detection (LOD), but it remains a great challenge due to the large contact resistance at the graphene-metal contact. Here we present a surface modification strategy employing persistent carbene on gold electrodes to reduce the contact resistivity by a factor of 25, greatly diminishing µGHS flicker noise by a factor of 1000 to 3.13 × 10-14 V2/Hz while simultaneously lowering the magnetic LOD SB1/2 to 1440 nT/Hz1/2 at 1 kHz under a 100 µA bias current. To the best of our knowledge, this represents the lowest SB1/2 reported for scalable µGHSs fabricated through wafer-scale photolithography. The reduction in contact noise is attributed to the π-π stacking interaction between the graphene and the benzene rings of persistent carbene, as well as the decrease in the work function of gold as confirmed by Kelvin Probe Force Microscopy. By incorporating a microcoil into the µGHS, we have demonstrated the real-time detection of superparamagnetic nanoparticles (SNPs), achieving a remarkable LOD of â¼528 µg/L. This advancement holds great potential for the label-free detection of magnetic biomarkers, e.g., ferritin, for the early diagnosis of diseases associated with iron overload, such as hereditary hemochromatosis (HHC).
ABSTRACT
Tumor necrosis factor-alpha (TNF-α) serves as a crucial biomarker in various diseases, necessitating sensitive detection methodologies. This study introduces an innovative approach utilizing an aptamer-functionalized surface plasmon resonance (SPR) substrate together with an ultrasensitive measure, the Goos-Hänchen (GH) shift, to achieve sensitive detection of TNF-α. The developed GH-aptasensing platform has shown a commendable figure-of-merit of 1.5 × 104 µm per RIU, showcasing a maximum detectable lateral position shift of 184.7 ± 1.2 µm, as characterized by the glycerol measurement. Employing aptamers as the recognition unit, the system exhibits remarkable biomolecule detection capabilities, including the experimentally obtained detection limit of 1 aM for the model protein bovine serum albumin (BSA), spanning wide dynamic ranges. Furthermore, the system successfully detects TNF-α, a small cytokine, with an experimental detection limit of 1 fM, comparable to conventional SPR immunoassays. This achievement represents one of the lowest experimentally derived detection limits for cytokines in aptamer-based SPR sensing. Additionally, the application of the GH shift marks a ground breaking advancement in aptamer-based biosensing, holding significant promise for pushing detection limits further, especially for small cytokine targets.
Subject(s)
Aptamers, Nucleotide , Surface Plasmon Resonance , Tumor Necrosis Factor-alpha , Animals , Cattle , Humans , Aptamers, Nucleotide/chemistry , Biosensing Techniques/methods , Gold/chemistry , Limit of Detection , Serum Albumin, Bovine/chemistry , Surface Plasmon Resonance/methods , Tumor Necrosis Factor-alpha/analysisABSTRACT
Telomerase is a basic reverse transcriptase that maintains the telomere length in cells, and accurate and specific sensing of telomerase in living cells is critical for medical diagnostics and disease therapeutics. Herein, we demonstrate for the first time the construction of an enzymatically controlled DNA nanomachine with endogenous apurinic/apyrimidinic endonuclease 1 (APE1) as a driving force for one-step imaging of telomerase in living cells. The DNA nanomachine is designed by rational engineering of substrate probes and reporter probes embedded with an enzyme-activatable site (i.e., AP site) and their subsequent assembly on a gold nanoparticle (AuNP). Upon recognition and cleavage of the AP site in the substrate probe by APE1, the loop of the substrate probe unfolds, exposing telomeric primer (TP) with the 3'-OH end. Subsequently, the TP is elongated by telomerase at the 3'-OH end to generate a long telomeric product. The resultant telomeric product acts as a swing arm that can hybridize with a reporter probe to initiate the APE1-powered walking reaction, ultimately generating a significantly enhanced fluorescence signal. Notably, endogenous APE1 is used as the driving force of the DNA nanomachine, avoiding the introduction of exogenous auxiliary cofactors into the cellular microenvironment. Owing to the high kinetics and high amplification efficiency of the APE1-powered DNA nanomachine, this strategy enables one-step sensitive sensing of telomerase in vitro and in vivo. It can successfully discriminate telomerase activity between cancer cells and normal cells, screen telomerase inhibitors, and monitor the variations of telomerase activity in living cells, offering a prospective platform for molecular diagnostics and drug discovery.
Subject(s)
Metal Nanoparticles , Telomerase , Humans , Telomerase/metabolism , Gold/chemistry , Metal Nanoparticles/chemistry , DNA/chemistry , HeLa Cells , DNA-(Apurinic or Apyrimidinic Site) Lyase/metabolismABSTRACT
Accurate and sensitive analysis of circulating tumor cells (CTCs) in human blood provides a non-invasive approach for the evaluation of cancer metastasis and early cancer diagnosis. Herein, we demonstrate the controllable assembly of a quantum dot (QD)-based aptasensor guided by CRISPR/Cas12a for direct measurement of CTCs in human blood. We introduce a magnetic bead@activator/recognizer duplex core-shell structure to construct a multifunctional platform for the capture and direct detection of CTCs in human blood, without the need for additional CTC release and re-identification steps. Notably, the introduction of magnetic separation ensures that only a target-induced free activator can initiate the downstream catalysis, efficiently avoiding the undesired catalysis triggered by inappropriate recognition of the activator/recognizer duplex structure by crRNAs. This aptasensor achieves high CTC-capture efficiency (82.72%) and sensitive detection of CTCs with a limit of detection of 2 cells mL-1 in human blood, holding great promise for the liquid biopsy of cancers.
Subject(s)
Neoplastic Cells, Circulating , Quantum Dots , Humans , Neoplastic Cells, Circulating/pathology , Quantum Dots/chemistry , CRISPR-Cas Systems/genetics , Liquid BiopsyABSTRACT
Miniaturized droplets, characterized by well-controlled microenvironments and capability for parallel processing, have significantly advanced the studies on enzymatic evolution, molecular diagnostics, and single-cell analysis. However, manipulation of small-sized droplets, including moving, merging, and trapping of the targeted droplets for complex biochemical assays and subsequent analysis, is not trivial and remains technically demanding. Among various techniques, light-driven methods stand out as a promising candidate for droplet manipulation in a facile and flexible manner, given the features of contactless interaction, high spatiotemporal resolution, and biocompatibility. This review therefore compiles an in-depth discussion of the governing mechanisms underpinning light-driven droplet manipulation. Besides, light-responsive materials, representing the core of light-matter interaction and the key character converting light into different forms of energy, are particularly assessed in this review. Recent advancements in light-responsive materials and the most notable applications are comprehensively archived and evaluated. Continuous innovations and rational engineering of light-responsive materials are expected to propel the development of light-driven droplet manipulation, equip droplets with enhanced functionality, and broaden the applications of droplets for biochemical studies and routine biochemical investigations.
ABSTRACT
Absolute quantification of biological samples provides precise numerical expression levels, enhancing accuracy, and performance for rare templates. Current methodologies, however, face challenges-flow cytometers are costly and complex, whereas fluorescence imaging, relying on software or manual counting, is time-consuming and error-prone. It is presented that Deep-qGFP, a deep learning-aided pipeline for the automated detection and classification of green fluorescent protein (GFP) labeled microreactors, enables real-time absolute quantification. This approach achieves an accuracy of 96.23% and accurately measures the sizes and occupancy status of microreactors using standard laboratory fluorescence microscopes, providing precise template concentrations. Deep-qGFP demonstrates remarkable speed, quantifying over 2000 microreactors across ten images in just 2.5 seconds, with a dynamic range of 56.52-1569.43 copies µL-1 . The method demonstrates impressive generalization capabilities, successfully applied to various GFP-labeling scenarios, including droplet-based, microwell-based, and agarose-based applications. Notably, Deep-qGFP is the first all-in-one image analysis algorithm successfully implemented in droplet digital polymerase chain reaction (PCR), microwell digital PCR, droplet single-cell sequencing, agarose digital PCR, and bacterial quantification, without requiring transfer learning, modifications, or retraining. This makes Deep-qGFP readily applicable in biomedical laboratories and holds potential for broader clinical applications.
Subject(s)
Deep Learning , Green Fluorescent Proteins/genetics , Sepharose , Polymerase Chain Reaction/methods , SoftwareABSTRACT
In the modern world with climate changes and increasing pollution, different types of stress are becoming an increasing challenge. Hence, the identification of reliable biomarkers of stress and accessible sensors to measure such biomarkers are attracting increasing attention. In the current study, we demonstrate that the activity, but not the expression, of the ubiquitous enzyme topoisomerase 1 (TOP1), as measured in crude cell extracts by the REEAD sensor system, is markedly reduced in response to thermal stress in both fruit flies (Drosophila melanogaster) and cultivated human cells. This effect was observed in response to both mild-to-moderate long-term heat stress and more severe short-term heat stress in D. melanogaster. In cultivated HeLa cells a reduced TOP1 activity was observed in response to both cold and heat stress. The reduced TOP1 activity appeared dependent on one or more cellular pathways since the activity of purified TOP1 was unaffected by the utilized stress temperatures. We demonstrate successful quantitative measurement of TOP1 activity using an easily accessible chemiluminescence readout for REEAD pointing towards a sensor system suitable for point-of-care assessment of stress responses based on TOP1 as a biomarker.
Subject(s)
Drosophila melanogaster , Animals , Humans , HeLa Cells , BiomarkersABSTRACT
Water-in-oil droplets have emerged as promising microreactors for high-throughput biochemical analysis due to their features of reduced sample consumption and automated operation. For a typical screening application, droplets are often trapped for continuous monitoring of the reaction over an extended period, followed by the selective retrieval of targeted droplets based on the after-effect of biochemical reactions. While techniques for droplet trapping are well developed, retrieval of targeted droplets mainly demands complicated device fabrication or sophisticated control. Herein, facile and rapid selective droplet release is achieved by utilizing a new class of photoresponsive fluorosurfactant based on plasmonic nanoparticles. The intense photothermal response provided by this novel photoresponsive fluorosurfactant is capable of vaporizing the fluorocarbon oil at the droplet interface under laser illumination, resulting in a bubble releasing a trapped droplet on demand. A fully automated fluorescence-activated droplet release platform has also been developed to demonstrate its potential for droplet-based large-scale screening applications.
ABSTRACT
The past decades have witnessed the development of various stimuli-responsive materials with tailored functionalities, enabling droplet manipulation through external force fields. Among different strategies, light exhibits excellent flexibility for contactless control of droplets, particularly in three-dimensional space. Here, we present a facile synthesis of plasmonic hybrid microgels based on the electrostatic heterocoagulation between cationic microgels and anionic Au nanoparticles. The hybrid microgels are effective stabilizers of oil-in-water Pickering emulsions. In addition, the laser irradiation on Au nanoparticles creats a "cascade effect" to thermally responsive microgels, which triggers a change in microgel wettability, resulting in microgel desorption and emulsion destabilization. More importantly, the localized heating generated by a focused laser induces the generation of a vapor bubble inside oil droplets, leading to the formation of a novel air-in-oil-in-water (A/O/W) emulsion. These A/O/W droplets are able to mimic natural microswimmers in an aqueous environment by tracking the motion of a laser spot, thus achieving on-demand droplet merging and chemical communication between isolated droplets. Such proposed systems are expected to extend the applications of microgel-stabilized Pickering emulsions for substance transport, programmed release and controlled catalytic reactions.
ABSTRACT
BACKGROUND: There is great interest to engineer in vitro models that allow the study of complex biological processes of the microvasculature with high spatiotemporal resolution. Microfluidic systems are currently used to engineer microvasculature in vitro, which consists of perfusable microvascular networks (MVNs). These are formed through spontaneous vasculogenesis and exhibit the closest resemblance to physiological microvasculature. Unfortunately, under standard culture conditions and in the absence of co-culture with auxiliary cells as well as protease inhibitors, pure MVNs suffer from a short-lived stability. METHODS: Herein, we introduce a strategy for stabilization of MVNs through macromolecular crowding (MMC) based on a previously established mixture of Ficoll macromolecules. The biophysical principle of MMC is based on macromolecules occupying space, thus increasing the effective concentration of other components and thereby accelerating various biological processes, such as extracellular matrix deposition. We thus hypothesized that MMC will promote the accumulation of vascular ECM (basement membrane) components and lead to a stabilization of MVN with improved functionality. RESULTS: MMC promoted the enrichment of cellular junctions and basement membrane components, while reducing cellular contractility. The resulting advantageous balance of adhesive forces over cellular tension resulted in a significant stabilization of MVNs over time, as well as improved vascular barrier function, closely resembling that of in vivo microvasculature. CONCLUSION: Application of MMC to MVNs in microfluidic devices provides a reliable, flexible and versatile approach to stabilize engineered microvessels under simulated physiological conditions.
ABSTRACT
In this paper, we report a simple, rapid, low-cost, biocompatible, and detachable microfluidic chip fabrication method for customized designs based on Parafilm®. Here, Parafilm® works as both a bonding agent and a functional membrane. Its high ultimate tensile stress (3.94 MPa) allows the demonstration of high-performance actuators such as microvalves and micropumps. By laser ablation and the one-step bonding of multiple layers, 3D structured microfluidic chips were successfully fabricated within 2 h. The consumption time of this method (~2 h) was 12 times less than conventional photolithography (~24 h). Moreover, the shear stress of the PMMA-Parafilm®-PMMA specimens (0.24 MPa) was 2.13 times higher than that of the PDMS-PDMS specimens (0.08 MPa), and 0.56 times higher than that of the PDMS-Glass specimens (0.16 MPa), showing better stability and reliability. In this method, multiple easily accessible materials such as polymethylmethacrylate (PMMA), PVC, and glass slides were demonstrated and well-incorporated as our substrates. Practical actuation devices that required high bonding strength including microvalves and micropumps were fabricated by this method with high performance. Moreover, the biocompatibility of the Parafilm®-based microfluidic devices was validated through a seven-day E. coli cultivation. This reported fabrication scheme will provide a versatile platform for biochemical applications and point-of-care diagnostics.
ABSTRACT
Developing magnetic ultrasoft robots to navigate through extraordinarily narrow and confined spaces like capillaries in vivo requires synthesizing materials with excessive deformability, responsive actuation, and rapid adaptability, which are difficult to achieve with the current soft polymeric materials, such as elastomers and hydrogels. We report a magnetically actuatable and water-immiscible (MAWI) coacervate based on the assembled magnetic core-shell nanoparticles to function as a liquid robot. The degradable and biocompatible millimeter-sized MAWI coacervate liquid robot can remain stable under changing pH and salt concentrations, release loaded cargoes on demand, squeeze through an artificial capillary network within seconds, and realize intravascular targeting in vivo guided by an external magnetic field. We believe the proposed "coacervate-based liquid robot" can implement demanding tasks beyond the capability of conventional elastomer or hydrogel-based soft robots in the field of biomedicine and represents a distinct design strategy for high-performance ultrasoft robots.
Subject(s)
Robotics , Water , Equipment Design , Physical Phenomena , Elastomers , Magnetic PhenomenaABSTRACT
The pollen grains of Phalaenopsis orchids are clumped tightly together, packed in pollen dispersal units called pollinia. In this study, the morphology, cytology, biochemistry, and sucrose transporters in pollinia of Phalaenopsis orchids were investigated. Histochemical detection was used to characterize the distribution of sugars and callose at the different development stages of pollinia. Ultra-performance liquid chromatography-high resolution-tandem mass spectrometry data indicated that P. aphrodite accumulated abundant saccharides such as sucrose, galactinol, myo-inositol, and glucose, and trace amounts of raffinose and trehalose in mature pollinia. We found that galactinol synthase (PAXXG304680) and trehalose-6-phosphate phosphatase (PAXXG016120) genes were preferentially expressed in mature pollinia. The P. aphrodite genome was identified as having 11 sucrose transporters (SUTs). Our qRT-PCR confirmed that two SUTs (PAXXG030250 and PAXXG195390) were preferentially expressed in the pollinia. Pollinia germinated in pollen germination media (PGM) supplemented with 10% sucrose showed increased callose production and enhanced pollinia germination, but there was no callose or germination in PGM without sucrose. We show that P. aphrodite accumulates high levels of sugars in mature pollinia, providing nutrients and enhanced SUT gene expression for pollinia germination and tube growth.
Subject(s)
Orchidaceae , Sugars , Sugars/metabolism , Sucrose/metabolism , Orchidaceae/genetics , Orchidaceae/metabolism , Pollen/metabolism , Membrane Transport Proteins/genetics , Membrane Transport Proteins/metabolismABSTRACT
The nucleus pulposus (NP) of intervertebral disc represents a soft gel consisting of glycosaminoglycans (GAGs)-rich extracellular matrix (ECM). Significant loss of GAGs and normal functions are the most prevalent changes in degenerated disc. Attempts targeted to incorporate GAGs into collagen fibrous matrices have been made but the efficiency is very low, and the resulting structures showed no similarity with native NP. Inspired by the characteristic composition and structures of the ECM of native NP, here, we hypothesize that by chemically modifying the collagen (Col) and hyaluronic acid (HA) and co-precipitating with GAGs, a bio-inspired nano-material recapitulating the composition, ultra-structure and function of the GAG-rich ECM will be fabricated. Compositionally, the bio-inspired nano-material namely Aminated Collagen-Aminated Hyaluronic Acid-GAG (aCol-aHA-GAG) shows a record high GAG/hydroxyproline ratio up to 39.1:1 in a controllable manner, out-performing that of the native NP. Ultra-structurally, the nano-material recapitulates the characteristic 'nano-beads' (25 nm) and 'bottle-brushes' (133 nm) features as those found in native NP. Functionally, the nano-material supports the viability and maintains the morphological and phenotypic markers of bovine NP cells, and shows comparable mechanical properties of native NP. This work contributes to the development of a compositionally, structurally, and functionally biomimetic nano-material for NP tissue engineering.
Subject(s)
Intervertebral Disc Degeneration , Intervertebral Disc , Nucleus Pulposus , Animals , Cattle , Glycosaminoglycans/chemistry , Hyaluronic Acid , Extracellular Matrix/chemistry , Collagen/analysisABSTRACT
Liver tissue engineering is promising as an alternative strategy to treat liver failure. However, generating functional hepatocytes from stem cells is conventionally restricted by the immature status of differentiated cells. Besides, embedding hepatocytes in bulk scaffold is limited by a lack of vascularity and low cell-packing density. Here, we fabricate collagen type I (COL1) microspheres for efficient hepatic differentiation of pluripotent stem cells and subsequent assembly of prevascularized liver tissue (PLT). Using a microfluidic platform, we demonstrate that hydrogel COL1 microspheres (mCOL1) encapsulating human embryonic stem cells (hESCs) can be reproducibly generated and efficiently differentiated into hepatocyte-like cells (HLCs) microspheres for the first time. Compared with other culture configurations such as encapsulation of hESC in a bulk COL1 hydrogel and 2D monolayer culture, mCOL1 with high uniformity produce HLC microspheres of improved maturity based on comprehensive analyses of cell morphology, transcriptome profile, hepatic marker expression and hepatic functions. In addition, these HLC microspheres can be applied as building blocks to self-assemble with endothelial cells to construct a dense PLT. The PLT resembles native liver tissue with high cell-packing density, shows successful engraftment in mice liver following implantation, and exhibits improved hepatic functionin vivo. Overall, it is believed that this multiscale technology will advance the fabrication of stem cell-based liver tissue for regenerative medicine, drug screening, andin vitroliver modeling.
Subject(s)
Induced Pluripotent Stem Cells , Pluripotent Stem Cells , Mice , Animals , Humans , Tissue Engineering , Hydrogels , Endothelial Cells , Microspheres , Liver , Hepatocytes , Cell DifferentiationABSTRACT
Tumor innervation is a common phenomenon with unknown mechanism. Here, we discovered a direct mechanism of tumor-associated macrophage (TAM) for promoting de novo neurogenesis via a subset showing neuronal phenotypes and pain receptor expression associated with cancer-driven nocifensive behaviors. This subset is rich in lung adenocarcinoma associated with poorer prognosis. By elucidating the transcriptome dynamics of TAM with single-cell resolution, we discovered a phenomenon "macrophage to neuron-like cell transition" (MNT) for directly promoting tumoral neurogenesis, evidenced by macrophage depletion and fate-mapping study in lung carcinoma models. Encouragingly, we detected neuronal phenotypes and activities of the bone marrow-derived MNT cells (MNTs) in vitro. Adoptive transfer of MNTs into NOD/SCID mice markedly enhanced their cancer-associated nocifensive behaviors. We identified macrophage-specific Smad3 as a pivotal regulator for promoting MNT at the genomic level; its disruption effectively blocked the tumor innervation and cancer-dependent nocifensive behaviors in vivo. Thus, MNT may represent a precision therapeutic target for cancer pain.
Subject(s)
Cancer Pain , Lung Neoplasms , Animals , Cancer Pain/metabolism , Cancer Pain/pathology , Lung Neoplasms/metabolism , Macrophages/metabolism , Mice , Mice, Inbred NOD , Mice, SCID , Neurons , Sequence Analysis, RNAABSTRACT
Single-cell reverse-transcription polymerase chain reaction (RT-PCR) has shown significant promise for transcriptional profiling of heterogeneous cells. However, currently developed microfluidic droplet-based methodologies for single-cell RT-PCR often require complex chip design to accommodate the associated multistep processes as well as customized detection platforms for high-throughput analysis. Herein, we proposed a dual-core double emulsion (DE)-based method to streamline the single-cell RT-PCR through thermo-induced coalescence of the dual cores. The dual-core DEs were produced by pairing two water-in-oil single emulsions containing a single-cell/lysis buffer and RT-PCR mix, respectively. After complete lysis of single cells in one of the cores, the dual-core DEs were merged by gentle heating, made possible by the optimized glycerol concentration present in the cores. Upon the coalescence of dual cores, the alkaline lysis buffer present in the core of the cell lysate was neutralized by the reaction buffer presented in the RT-PCR core, allowing TaqMan assay-based RT-PCR to occur effectively within the DEs. To demonstrate the potential of this streamlined dual-core platform, AKR1B10-positive A549 cells and AKR1B10-negative HEK293 cells were investigated via the TaqMan assay. Subsequently, specific transcript of AKR1B10 was readily available for quantitative profiling at the single-cell level using a commercially available flow cytometer in a high-throughput manner.
Subject(s)
Microfluidics , Emulsions , Flow Cytometry , HEK293 Cells , Humans , Microfluidics/methods , Reverse Transcriptase Polymerase Chain ReactionABSTRACT
A variety of physical and chemical methods have been developed in research laboratories for the induction of stem cell differentiation. However, the use of exogenous chemicals and materials may limit their widespread utility in clinics. To develop a clean and precise induction approach with minimal invasion, we reported here that 1-second stimulation by a tightly focused femtosecond laser (fsL) (140 mW/µm2 , 200 fs) can modulate the signaling systems in human mesenchymal cells, such as intracellular calcium and reactive oxygen species. Upon stimulation on an automatic platform, hMSCs were found to express osteoblastic markers and form calcium-rich deposits. Moreover, tissue mineralization was observed when the fsL-illuminated hMSCs were ectopically transplanted into nude mice. Collectively, we described a novel and non-contact optical stimulation method for cell differentiation with high spatiotemporal resolution.
Subject(s)
Mesenchymal Stem Cells , Osteogenesis , Animals , Mice , Humans , Osteogenesis/physiology , Calcium , Mice, Nude , Cell Differentiation , Lasers , Cells, CulturedABSTRACT
Current circulating tumor cells (CTCs) detection strategies based on surface epithelial markers suffer from low specificity in distinguishing between CTCs and epithelial cells in hematopoietic cell population. Tumor-associated miRNAs within CTCs are emerging as new biomarkers due to their high correlation with tumor development and progress. However, in-situ simultaneous analysis of multiple miRNAs in single CTC cell is still challenging. To overcome this limitation, a digital droplet microfluidic flow cytometry based on biofunctionalized 2D metal-organic framework nanosensor (Nano-DMFC) is developed for in situ detection of dual miRNAs simultaneously in single living breast cancer cells. Here, 2D MOF-based fluorescent resonance energy transfer (FRET) nanosensors are established by conjugating dual-color fluorescence dye-labeled DNA probes on MOF nanosheet surface. In the Nano-DMFC, 2D MOF-based nanoprobes are precisely microinjected into each single-cell encapsulated droplets to achieve dual miRNA characterization in single cancer cell. This Nano-DMFC platform successfully detects dual miRNAs at single-cell resolution in 10 mixed positive MCF-7 cells out of 10 000 negative epithelial cells in serum biomimic samples. Moreover, this Nano-DMFC platform shows good reproductivity in the recovery experiment of spiked blood samples, which demonstrate the high potential for CTC-based cancer early diagnosis and prognosis.
Subject(s)
MicroRNAs , Neoplastic Cells, Circulating , Biomarkers, Tumor , Cell Line, Tumor , Flow Cytometry , Humans , MCF-7 Cells , Microfluidics , Neoplastic Cells, Circulating/pathologyABSTRACT
The mechanism of extracellular ligand nano-geometry in ex vivo T cell activation for immunotherapy remains elusive. Herein, the authors demonstrate large aspect ratio (AR) of gold nanorods (AuNRs) conjugated on cell culture substrate enhancing both murine and human T cell activation through the nanoscale anisotropic presentation of stimulatory ligands (anti-CD3(αCD3) and anti-CD28(αCD28) antibodies). AuNRs with large AR bearing αCD3 and αCD28 antibodies significantly promote T cell expansion and key cytokine secretion including interleukin-2 (IL-2), interferon-gamma (IFN-γ), and tumor necrosis factor-alpha (TNF-α). High membrane tension observed in large AR AuNRs regulates actin filament and focal adhesion assembly and develops maturation-related morphological features in T cells such as membrane ruffle formation, cell spreading, and large T cell receptor (TCR) cluster formation. Anisotropic stimulatory ligand presentation promotes differentiation of naïve CD8+ T cells toward the effector phenotype inducing CD137 expression upon co-culture with human cervical carcinoma. The findings suggest the importance of manipulating extracellular ligand nano-geometry in optimizing T cell behaviors to enhance therapeutic outcomes.