ABSTRACT
OBJECTIVE: To report data from the first three years of operation of the RSNA-ACR 3D Printing Registry. METHODS: Data from June 2020 to June 2023 was extracted, including demographics, indications, workflow and user assessments. Clinical indications were stratified by 12 organ systems. Imaging modalities, printing technologies and number of parts per case were assessed. Effort data was analyzed, dividing staff into provider and non-provider categories. The opinions of clinical users were evaluated through a Likert-scale questionnaire, and estimates of procedure time saved were collected. RESULTS: A total of 20 sites and 2,637 cases were included, consisting of 1,863 anatomic models and 774 anatomic guides. Mean patient age for models and guides was 42.4 ± 24.5 years and 56.3 ± 18.5 years respectively. Cardiac models were the most common type of models (27.2%), and neurologic guides were the most common type of guides (42.4%). Material jetting, vat photopolymerization and material extrusion were the most common printing technologies used overall (85.6% of all cases). On average, providers spent 92.4 minutes and non-providers spent 335.0 minutes per case. Providers spent most time on consultation (33.6 minutes), while non-providers focused most on segmentation (148.0 minutes). Confidence in treatment plans increased after using 3D printing (p<.001). Estimated procedure time savings for 155 cases was 40.5 ± 26.1 minutes. CONCLUSION: 3D printing is performed in healthcare facilities for many clinical indications. The registry provides insight into the technologies and workflows used to create anatomic models and guides, and the data shows clinical benefits from 3D printing.
ABSTRACT
To address the increasing demand for sensitive and selective sample preparation methods for metal analysis; preconcentration of intended analyte from complex sample matrices before analysis is required to improve the performance of analysis instruments. In this study, we have engineered a sustainable and portable syringe-based hand-operable three-dimensionally (3D) printed sample pretreatment apparatus equipped with a replaceable bio-based thin- film metal sorbent. This device effectively addresses the challenges of sample matrix interference in metal analysis. A metal sorbent film composed of chitosan (CS) and polydopamine (PDA) leveraged the diverse functional groups in the CS/PDA matrix to significantly enhance the extraction efficiency for various metals. Our approach demonstrated excellent analytical performance, with coefficients of determination (R2) of 0.9982 for copper (Cu) and 0.996 for chromium (Cr). The method achieved low limits of detection (LOD) of 0.3 µg L-1 for Cr and 0.7 µg L-1 for Cu. Precision and practicality assessments using actual urine samples yielded satisfactory relative standard deviations (RSD%) ranging from of 1.6 %-8.5 % for both metals, indicating minimal interference from the sample matrix. Moreover, our approach exhibited robust performance even after seven consecutive extraction and desorption cycles, highlighting its sustainability and practical applicability for laboratory and on-site sample pretreatment.
Subject(s)
Chitosan , Indoles , Polymers , Printing, Three-Dimensional , Chitosan/chemistry , Polymers/chemistry , Indoles/chemistry , Copper/chemistry , Humans , Limit of Detection , Chromium/isolation & purification , Chromium/analysis , Chromium/urine , Adsorption , Metals/chemistry , MiniaturizationABSTRACT
BACKGROUND: This study tackles the critical challenges in metal analysis by presenting an innovative miniaturized metal extraction device prototype. This device features a functional nanocomposite (FNC) enhanced 3D-printed polylactic acid (PLA) metal extractant (FNC@3D PLA). The research is motivated by the constraints of traditional solid-phase extraction (SPE) methods, specifically their limitations in handling competitive metal ion environments and matrix interference during inductively coupled plasma mass spectrometry (ICP-MS) analysis. The designed prototype aims to overcome these challenges and enhance the extraction efficiency of diverse metals. RESULTS: The FNC, designed to incorporate various functional groups critical for metal ion extraction efficiency, was meticulously engineered through the reaction of acid-treated and delaminated graphitic carbon nitride nanosheets (Thiol-gCN NSs) with 3-mercaptopropyl trimethoxysilane (MPTMS). The competitive metal ion extraction efficiency of FNC@3D PLA was demonstrated, showcasing notable limit of detection values of 3.2 ± 0.7 ng mL-1 and 8.57 ± 3.05 ng mL-1 for Cu and Ag, respectively. Furthermore, the miniaturized 3D-printed metal-preconcentration setup incorporating FNC@3D PLA exhibited favorable intraday relative standard deviation (RSD) percentage (%) values ranging from 1.23 to 8.6 for both Cu and Ag. Interday RSD % between 1.41 and 8.14 were observed under spiked real urine sample conditions. The sustainability and robustness of the proposed approach were underscored by substantial recovery % values exhibited by FNC@3D PLA, even after eight consecutive regeneration processes. SIGNIFICANCE: This study significantly contributes to the advancement of analytical methodologies by providing a reliable and efficient platform for metal extraction and preconcentration in practical metal analysis applications. Developed FNC@3D PLA system demonstrates its potential to address the challenges associated with SPE in metal analysis, especially in complex sample matrices. We believe implications of this research can be extended to various fields, from environmental monitoring to clinical diagnostics, where accurate and reliable metal analysis is paramount.
ABSTRACT
Background: The incidence of upper tract urothelial carcinoma (UTUC) is uniquely high in kidney transplant (KT) recipients in Taiwan. The evidence of adjuvant chemotherapy (AC) in UTUC is contradictory. We have sought to determine whether AC is associated with potential benefits related to locally advanced UTUC after KT. Methods: We retrospectively analyzed 134 patients with locally advanced UTUC (at least stage T2) and patients who were administrated AC after unilateral or bilateral nephroureterectomy with bladder cuff excision. Of these 134 patients, 57 patients fulfilled our inclusion criteria. We used 23 KT and 34 non-KT locally advanced UTUC patients for comparison. Results: The mean follow-up time was 52.35 ± 34.56 and 64.71 ± 42.29 months for the KT and non-KT groups, respectively. The five-year disease-free survival (DFS) and overall survival (OS) rates were 45.7% vs. 70.2% and 62.8% vs. 77.6%, for the KT and non-KT groups. The Kaplan-Meier curve and the log rank test revealed significant differences in the DFS and OS rates between the two groups, p = 0.015 and 0.036. The influence of chemotherapy on graft kidney function was mild. Only three in the KT group and two in the non-KT group developed > grade 2 nephrotoxicity. Conclusions: Our study suggested that KT patients with locally advanced UTUC who had been administered AC after surgery presented worse OS and DFS than non-KT patients. KT patients tolerated the AC course well, and their nephrotoxicity levels were mild and acceptable.
ABSTRACT
PURPOSE: To correlate epigenetic patterns with ethnoracial status and locoregional therapy (LRT) response in patients with hepatocellular carcinoma (HCC). MATERIALS AND METHODS: DNA and RNA were extracted from 47 distinct formalin-fixed paraffin-embedded tumor samples from 42 patients with HCC (n = 14 Black, n = 19 White, n = 9 Hispanic). LRT response was determined using computed tomography (CT) or magnetic resonance (MR) imaging 3 months posttreatment of 35 tumors (n = 22 complete response, n = 13 retreatment candidates). RNA expression and DNA methylation were used to stratify patients by ethnoracial status and treatment response using partial least-squares discriminant analysis (PLS-DA). Results were validated using hierarchical clustering. Ingenuity pathway analysis was performed to identify upstream regulators and pathways. RESULTS: PLS-DA identified 100 genes and 12 methylated regions that differentiated tumors from Black from White/Hispanic patients. Hierarchical clustering clustered samples with the top 16 genes or the top 5 methylation regions. Dysregulated pathways included adrenomedullin pathway (P = .030), EIF2 signaling (P = .007), and several metabolic pathways. AGTR1 (log2fold = 1.59) and GSTM3 (log2fold = 2.53) represented potential differentially expressed therapeutic targets. PLS-DA identified 100 genes and 150 methylation regions that differentiated between complete responders and retreatment candidates. Hierarchical clustering clustered samples with the top 30 genes or the top 13 methylation regions. Dysregulated pathways included metabolic and DNA repair-related pathways. ASAP2 (log2fold = 0.29) and RAD50 (log2fold = 0.22) represented potential differentially expressed therapeutic targets. CONCLUSIONS: Variation in gene expression and DNA methylation patterns in patients with HCC corresponded to ethnoracial status and LRT response. These initial results suggest tumor profiling has the potential to close ethnoracial disparities and improve treatment stratification.
Subject(s)
Carcinoma, Hepatocellular , DNA Methylation , Epigenesis, Genetic , Liver Neoplasms , Adult , Aged , Female , Humans , Male , Middle Aged , Biomarkers, Tumor/genetics , Black or African American/genetics , Carcinoma, Hepatocellular/genetics , Gene Expression Profiling , Gene Expression Regulation, Neoplastic , Liver Neoplasms/genetics , Magnetic Resonance Imaging , Retrospective Studies , Tomography, X-Ray Computed , Treatment Outcome , White , Hispanic or LatinoABSTRACT
BACKGROUND: The use of medical 3D printing (focusing on anatomical modeling) has continued to grow since the Radiological Society of North America's (RSNA) 3D Printing Special Interest Group (3DPSIG) released its initial guideline and appropriateness rating document in 2018. The 3DPSIG formed a focused writing group to provide updated appropriateness ratings for 3D printing anatomical models across a variety of congenital heart disease. Evidence-based- (where available) and expert-consensus-driven appropriateness ratings are provided for twenty-eight congenital heart lesion categories. METHODS: A structured literature search was conducted to identify all relevant articles using 3D printing technology associated with pediatric congenital heart disease indications. Each study was vetted by the authors and strength of evidence was assessed according to published appropriateness ratings. RESULTS: Evidence-based recommendations for when 3D printing is appropriate are provided for pediatric congenital heart lesions. Recommendations are provided in accordance with strength of evidence of publications corresponding to each cardiac clinical scenario combined with expert opinion from members of the 3DPSIG. CONCLUSIONS: This consensus appropriateness ratings document, created by the members of the RSNA 3DPSIG, provides a reference for clinical standards of 3D printing for pediatric congenital heart disease clinical scenarios.
ABSTRACT
BACKGROUND: Which life satisfaction components could be a target of positive psychological interventions for longevity is largely unknown. We aimed to investigate association of the composite measure of life satisfaction and its individual components with mortality. METHODS: This cohort study included UK Biobank participants who responded to questions concerning five components of life satisfaction at baseline. We generated a composite score representing overall life satisfaction, ranging from 0 (lowest) to 5 (highest). The outcomes were all-cause and cause-specific mortality. We used multivariable Cox regression to estimate hazard ratios (HR) for the associations of interest. RESULTS: Among 165,842 eligible participants, 12,261 all-cause deaths were observed over a median of 12.9-year follow-up. Overall life satisfaction was inversely associated with all-cause mortality (adjusted HR 0.94 [95% CI: 0.93-0.95] per 1 score increment). Health satisfaction showed the strongest association with all-cause mortality, with a fully adjusted HR of 0.52 (95% CI: 0.49-0.55) for high/extreme satisfaction and 0.63 (95% CI: 0.59-0.66) for moderate satisfaction, compared with unsatisfaction (P-trend<0.001), independent of other satisfaction components, regardless of physical health and sociodemographics. The association for family, friendship, work and financial satisfaction was attenuated when adjusted for other life satisfaction components. Similar findings were observed for cause-specific mortality. LIMITATIONS: Observational study with single baseline measurement of life satisfaction precludes the ability to establish causal relationship. CONCLUSIONS: Higher overall life satisfaction was associated with lower mortality. As the major contributor to lower mortality regardless of physical health and sociodemographics, health satisfaction could be an important target of positive psychological interventions for longevity.
Subject(s)
Cardiovascular Diseases , Personal Satisfaction , Humans , Cohort Studies , Cause of Death , Prospective Studies , Risk FactorsABSTRACT
BACKGROUND AND PURPOSE: Cortical superficial siderosis (cSS) and cerebral microbleed (CMB) have distinct effects on intracerebral haemorrhage (ICH). We aim to investigate the combined effect of cSS and CMB on outcomes after ICH. METHODS: Based on a single-centre stroke registry database, patients with spontaneous ICH who had CT scan within 48 hours after ictus and MRI subsequently were identified. Eligible patients were divided into four groups (cSS-CMB-, cSS-CMB+, cSS+CMB-, cSS+CMB+) according to cSS and CMB on susceptibility-weighted image of MRI. Primary outcomes were haematoma volume on admission and unfavourable outcome defined as modified Rankin Scale scores ≥3 at 3 months. Secondary outcomes were all-cause death, recurrence of stroke and ICH during follow-up (median follow-up 2.0 years, IQR 1.0-3.0 years). RESULTS: A total of 673 patients were identified from 1044 patients with spontaneous ICH. 131 (19.5%) had cSS and 468 (69.5%) had CMB. Patients with cSS+CMB+ had the highest rate of poor outcome at 3 months, as well as all-cause death, recurrent stroke and ICH during follow-up. In cSS- patients, CMB was associated with smaller haematoma (ß -0.13; 95% CI -0.22 to -0.03; p=0.009), but it still increased risks of recurrent ICH (OR 4.6; 95% CI 1.3 to 15.6; p=0.015) and stroke (OR 2.0; 95% CI 1.0 to 4.0; p=0.049). These effects of CMB became unremarkable in the context of cSS+. CONCLUSIONS: Patients with different combinations of cSS and CMB have distinct patterns of short-term and long-term outcomes. Although CMB is related to restrained haematoma, it does not improve long-term outcomes. TRIAL REGISTRATION NUMBER: NCT04803292.
ABSTRACT
BACKGROUND: Medical three dimensional (3D) printing is performed for neurosurgical and otolaryngologic conditions, but without evidence-based guidance on clinical appropriateness. A writing group composed of the Radiological Society of North America (RSNA) Special Interest Group on 3D Printing (SIG) provides appropriateness recommendations for neurologic 3D printing conditions. METHODS: A structured literature search was conducted to identify all relevant articles using 3D printing technology associated with neurologic and otolaryngologic conditions. Each study was vetted by the authors and strength of evidence was assessed according to published guidelines. RESULTS: Evidence-based recommendations for when 3D printing is appropriate are provided for diseases of the calvaria and skull base, brain tumors and cerebrovascular disease. Recommendations are provided in accordance with strength of evidence of publications corresponding to each neurologic condition combined with expert opinion from members of the 3D printing SIG. CONCLUSIONS: This consensus guidance document, created by the members of the 3D printing SIG, provides a reference for clinical standards of 3D printing for neurologic conditions.
ABSTRACT
We established an innovative and easy-to-use methodology for selenium (Se) extraction and determination from real water samples utilizing a magnetic nanocomposite adsorbent (MNC-SPE) aided by an inductively coupled plasma mass spectrometry (ICP-MS) approach. The MNC-SPE adsorbent was fabricated by hybridizing Fe3O4 nanoparticles on the surface of carbon nitride nanosheets (GCN NSs) that were coated with 1-hexyl-3-methylimidazolium hexafluorophosphate ionic liquid (P-IL). A variety of techniques were used to thoroughly analyze the structural and chemical characteristics of MNC-SPE, and appear to have a great number of diverse active surface functional units (imidazole ring and -NH3+). In order to optimize the key factors affecting the Se extraction, parameters including the adsorbent dosage, contact time, eluent type, eluent volume, eluent time, and reusability of adsorbent were extensively studied. The proposed approach was validated under the optimal reaction conditions, and it showed good linearity between 0.15 and 100 pg µL-1 with a significant R2 value (R2 = 0.9994) toward Se metal. Besides, the Se limit of detection (LOD) and limit of quantification (LOQ) are 0.063 pg µL-1 and 0.147 pg µL-1, respectively. Further, by utilizing tap and river water samples, the applicability of the validated method was tested; the approach showed high Se recovery values in the range of 87.6-115.5% for the spiked real-world samples and the interday and intraday precision (RSD%) values of the approach were 4.8% (n = 6). The MNC-SPE can be regenerated and reused for four consecutive extraction-desorption cycles by employing 0.5 M NaOH eluent.
ABSTRACT
Background: Previous studies have shown that cortical superficial siderosis (cSS) can increase hematoma volume and predict poor outcomes following primary intracerebral hemorrhage (ICH). Objective: We aimed to determine whether a large hematoma volume was the essential factor contributing to worse outcomes of cSS. Methods: Patients with spontaneous ICH underwent a CT scan within 48 h after ictus. Evaluation of cSS was performed using magnetic resonance imaging (MRI) within 7 days. The 90-day outcome was assessed using the modified Rankin Scale (mRS). In addition, we investigated the correlation between cSS, hematoma volume, and 90-day outcomes using multivariate regression and mediation analyses. Results: Among the 673 patients with ICH [mean (SD) age, 61 (13) years; 237 female subjects (35.2%); median (IQR) hematoma volume, 9.0 (3.0-17.6) ml], 131 (19.5%) had cSS. There was an association between cSS and larger hematoma volume (ß = 4.449, 95% CI 1.890-7.009, p < 0.001) independent of hematoma location and was also related to worse 90-day mRS (ß = 0.333, 95% CI 0.008-0.659, p = 0.045) in multivariable regression. In addition, mediation analyses revealed that hematoma volume was an essential factor mediating the effect of cSS on unfavorable 90-day outcomes (proportion mediated:66.04%, p = 0.01). Conclusion: Large hematoma volume was the major charge of directing cSS to worse outcomes in patients with mild to moderate ICH, and cSS was related to a larger hematoma in both lobar and non-lobar areas. Clinical trial registration: https://clinicaltrials.gov/ct2/show/NCT04803292, identifier: NCT04803292.
ABSTRACT
Increased malignancy after kidney transplantation (KT) is by far the most troublesome issue. Among these malignancies, urothelial carcinoma (UC) incidence is uniquely high in Taiwan. We want to know whether routine sonography to detect native hydronephrosis is associated with the development of de novo urinary bladder urothelial carcinoma (UBUC) in post-KT recipients. From 2003 to 2018, we retrospectively analyzed 1005 KT patients, 58 of whom were subsequently diagnosed with UBUC. The association between new native hydronephrosis and post-KT UBUC was analyzed with univariate and multivariate logistic regression analyses and a Kaplan-Meier plot. We excluded cases of people who had upper urinary tract urothelial carcinoma (UTUC) and were diagnosed prior to UBUC. There were 612 males (60.9%) and 393 females (39.1%), with a mean age of 48.2 ± 12.0 years old at KT. The mean follow-up period was 118.6 ± 70.2 months, and the diagnosis of UBUC from KT to UBUC was 7.0 ± 5.1 years. New native kidney hydronephrosis occurred more frequently in the UBUC group (56.4% versus 6.4%, p < 0.001) than the non-UBUC group. Multivariate analysis disclosed that native hydronephrosis is the only statistically significant factor for UBUC, with an odds ratio of 16.03 (95% CI, 8.66-29.68; p < 0.001). UBUC in post-KT patients with native hydronephrosis also showed a tendency toward multifocal lesions upon presentation (47.8%). Post-KT UBUC is characterized by pathologically aggressive and multiple foci lesions. Native kidney hydronephrosis may be a deciding factor of post-KT UBUC.
ABSTRACT
BACKGROUND: Dying at home accompanied by loved-ones is regarded favorably and brings good luck in Taiwan. This study aimed to examine the relevant factors affecting whether an individual dies at home or not in a group of terminal patients receiving palliative home care service. METHODS: The patients who were admitted to a palliative home care service at a hospital-affiliated home health care agency were consecutively enrolled between March 1, 2021 and March 31, 2022. During the period of care, the instruments of the palliative care outcomes collaboration was used to assess patients in each home visit twice a week, including symptom assessment scale, palliative care problem severity score, Australia-modified Karnofsky performance status, resource utilization groups-activities of daily living, and palliative care phase. RESULTS: There were 56 participants (53.6% female) with a median age of 73.0 years (interquartile range (IQR) 61.3-80.3 y/o), of whom 51 (91.1%) patients were diagnosed with cancer and 49 (96.1%) had metastasis. The number of home visits was 3.5 (IQR 2.0-5.0) and the average number of days under palliative home care service was 31 (IQR 16.3-51.5) before their death. After the end of the study, there was a significant deterioration of sleeping, appetite, and breathing problems in the home-death group, and appetite problems in the non-home death patients. However, physician-reported psychological/spiritual problems improved in the home-death group, and pain improved in the non-home death patients. Physical performance deteriorated in both groups, and more resource utilization of palliative care was needed. The 44 patients who died at home had greater cancer disease severity, fewer admissions, and the proportion of families desiring a home death for the patient was higher. CONCLUSIONS: Although the differences in palliative outcome indicators were minor between patients who died at home and those who died in the hospital, understanding the determinants and change of indicators after palliative care service at different death places may be helpful for improving the quality of end-of-life care.
Subject(s)
Home Care Services , Neoplasms , Terminal Care , Humans , Female , Aged , Male , Activities of Daily Living , Palliative Care , Neoplasms/therapyABSTRACT
OBJECTIVE: To compare survival outcomes between primary radical surgery and primary radiation in early cervical cancer. METHODS: Patient information was extracted from the Surveillance, Epidemiology, and Results database. Patients diagnosed with early cervical cancer of stage T1a, T1b, and T2a (American Joint Committee on Cancer, 7th edition) from 1998 to 2015 were included in this study after propensity score matching. Overall survival (OS) was analyzed using the Kaplan-Meier method. RESULTS: Among the 4964 patients included in the study, 1080 patients were identified as having positive lymph nodes (N1), and 3884 patients were identified as having negative lymph nodes (N0). Patients with primary surgery had significantly longer 5-year OS than those with primary radiotherapy in both the N1 group (P<0.001) and N0 group (P<0.001). In the subgroup analysis, similar results were found in patients with positive lymph nodes of stage T1a (100.0% vs. 61.1%), T1b (84.1% vs. 64.3%), and T2a (74.4% vs. 63.8%). In patients with T1b1 and T2a1, primary surgery resulted in longer OS than primary radiation, but not in patients with T1b2 and T2a2. In multivariate analysis, the primary treatment was identified as an independent prognostic factor in both N1 and N0 patients (HRN1=2.522, 95% CI=1.919-3.054, PN1<0.001; HRN0=1.895, 95% CI=1.689-2.126, PN0<0.001). CONCLUSION: In early cervical cancer stage T1a, T1b1, and T2a1, primary surgery may result in longer OS than primary radiation for patients with and without lymph node metastasis.
Subject(s)
Lymph Nodes , Uterine Cervical Neoplasms , Female , Humans , Lymph Nodes/surgery , Lymph Nodes/pathology , Lymphatic Metastasis/pathology , Neoplasm Staging , Uterine Cervical Neoplasms/radiotherapy , Uterine Cervical Neoplasms/surgery , Uterine Cervical Neoplasms/pathologyABSTRACT
BACKGROUND: Access to imaging reports and review of the breast imaging directly with a patient with breast cancer helps improve the understanding of disease extent and severity. A 3D printed breast model can further enhance a patient's understanding and communication with the healthcare team resulting in improved patient comprehension and patient input with reduced treatment decision conflict. Furthermore, 3D printed models can facilitate training of residents and fellows involved in the diagnosis and treatment management of breast cancer. CASE PRESENTATION: We present a 3D printed breast tumor model segmented from positron electron tomography/computed tomography and fabricated via desktop vat polymerization as proof of concept for treatment planning for a patient diagnosed with triple negative inflammatory breast carcinoma. CONCLUSION: We illustrate benefits and indications for 3D printing in the management of breast cancer and specifically inflammatory breast cancer in this case. Fabrication and implementation of 3D printed models enhances patient's understanding and communication with the healthcare team regarding their condition, treatment options and anticipated outcomes. It provides personalized treatment planning by examining patient-specific pathology and the anatomic spatial relationships. Furthermore, 3D printed models facilitate medical education for trainees across disciplines involved in the patient's care.
ABSTRACT
BACKGROUND: Sjogren's syndrome (SS) is a systemic autoimmune disease featured with a dry mouth and dry eyes. Several autoantibodies, including anti-SSA, anti-SSB, antinuclear antibodies can be detected in patients with SS. Oxidation-specific epitopes (OSEs) can be formed from malondialdehyde (MDA)-modified protein adducts and trigger chronic inflammation. In this study, our purposes were used serum levels of anti-MDA-modified peptide adducts autoantibodies to evaluate predictive performance by machine learning algorithms in primary Sjögren's syndrome (pSS) and assess the association between pSS and healthy controls. METHODS: Three novel MDA-modified peptide adducts, including immunoglobulin (Ig) gamma heavy chain 1 (IGHG1)102-131, complement factor H (CFAH)1045-1062, and Ig heavy constant alpha 1 (IGHA1)307-327 were identified and validated. Serum levels of protein, MDA-modified protein adducts, MDA, and autoantibodies recognizing unmodified peptides and MDA-modified peptide adducts were measured. Statistically significance in correlations and odds ratios (ORs) were estimated. RESULTS: The random forest classifier utilized autoantibodies combination composed of IgM anti-IGHG1102-131, IgM anti-IGHG1102-131 MDA and IgM anti-IGHA1307-327 achieved predictive performance as an accuracy of 88.0%, a sensitivity of 93.7%, and a specificity of 84.4% which may be as potential diagnostic biomarkers to differentiate patients with pSS from rheumatoid arthritis (RA), and secondary SS in RA and HCs. CONCLUSIONS: Our findings imply that low levels of IgA anti-IGHG1102-131 MDA (OR = 2.646), IgA anti-IGHG1102-131 (OR = 2.408), IgA anti-CFAH1045-1062 (OR = 2.571), and IgA anti-IGHA1307-327 (OR = 2.905) may denote developing risks of pSS, respectively.
Subject(s)
Arthritis, Rheumatoid , Sjogren's Syndrome , Antibodies, Antinuclear , Autoantibodies , Biomarkers , Complement Factor H , Epitopes , Female , Humans , Immunoglobulin A , Immunoglobulin M , Malondialdehyde , Peptides , Sjogren's Syndrome/diagnosisABSTRACT
BACKGROUND: Advanced diagnostic imaging is an essential part of preoperative planning for oral and maxillofacial surgery in veterinary patients. 3-dimensional (3D) printed models and surgical guides generated from diagnostic imaging can provide a deeper understanding of the complex maxillofacial anatomy, including relevant spatial relationships. Additionally, patient-specific 3D printed models allow surgeons and trainees to better examine anatomical features through tactile and visuospatial feedback allowing for improved preoperative planning, intraoperative guidance, and enhanced trainee education. Furthermore, these models facilitate discussions with pet owners, allowing for improved owner understanding of pathology, and educated decision-making regarding treatment. CASE PRESENTATION: Our case series consists of three 3D printed models segmented from computed tomography (CT) and cone beam CT (CBCT) and fabricated via desktop vat polymerization for preoperative planning and intraoperative guidance for resection of maxillary osteosarcoma, mandibular reconstruction after mandibulectomy, and gap arthroplasty for temporomandibular joint ankylosis in dogs. CONCLUSIONS: We illustrate multiple benefits and indications for 3D printing in veterinary oral and maxillofacial surgery. 3D printed models facilitate the understanding of complex surgical anatomy, creating an opportunity to assess the spatial relationship of the relevant structures. It facilitates individualized surgical planning by allowing surgeons to tailor and augment the surgical plan by examining patient-specific anatomy and pathology. Surgical steps may also be simulated in advance, including planning of osteotomy lines, and pre-contouring of titanium plates for reconstruction. Additionally, a 3D printed model and surgical guide also serve as invaluable intraoperative reference and guidance. Furthermore, 3D printed models have the potential to improve veterinary resident and student training as well as pet owner understanding and communication regarding the condition of their pets, treatment plan and intended outcomes.
ABSTRACT
OBJECTIVE: To investigate the effects of concomitant injections of botulinum toxin-A (BoNT-A) into the detrusor and external urethral sphincter muscles in suprasacral spinal cord injured patients with detrusor overactivity and detrusor sphincter dyssynergia. DESIGN: An open treatment trial with pre- and posttreatment evaluations. SUBJECTS: Male suprasacral spinal cord injury patients (n = 20) with neurogenic detrusor overactivity and detrusor sphincter dyssynergia who emptied their bladder by reflex voiding and were unwilling to increase the frequency of intermittent catheterization. METHODS: Cystoscopic guidance of 200 U BoNT-A injections into the detrusor muscle and 100 U into external urethral sphincter muscles were applied. The urodynamic parameters, voiding diaries and quality of life scores using Urinary Distress Inventory, Short Form (UDI-6) and Incontinence Impact Questionnaire, Short Form (IIQ-7) were compared. RESULTS: All participants experienced a significant mean reduction in maximal detrusor pressure and maximal urethral pressure profile, and a mean significant increase in maximal cystometric bladder capacity 12 weeks after concomitant injections. Bladder diaries demonstrated persistently increased spontaneous voided volume, but no increase in post-void residual ratio, daily clean intermittent catheterization (CIC) frequency and diaper pad use from baseline to 24 weeks. UDI-6 scores were significantly improved at 4 and 12 weeks and IIQ-7 scores improved only at 12 weeks. CONCLUSION: Concomitant detrusor and external urethral sphincter BoNT-A injections may decrease detrusor and urethral pressure without increasing postvoid residual ratio and diaper pad use. For spinal cord injury patients with neurogenic detrusor overactivity and detrusor sphincter dyssynergia who are unwilling, or for whom it is inconvenient, to increase CIC frequency and who want to preserve spontaneous voiding, this treatment may provide an optional alternative.
Subject(s)
Botulinum Toxins, Type A , Spinal Cord Injuries , Ataxia/complications , Botulinum Toxins, Type A/therapeutic use , Humans , Male , Quality of Life , Spinal Cord Injuries/complications , Treatment Outcome , UrethraABSTRACT
Cognitive dysfunction commonly occurs among older patients during admission and is associated with adverse prognosis. This study evaluated clinical characteristics and outcome determinants in hospitalized older patients with cognitive disorders. The main outcomes were length of stay, readmission within 30 days, Barthel index (BI) score at discharge, BI score change (discharge BI score minus BI score), and proportion of positive BI score change to indicate change of activities of daily living (ADL) change during hospitalization. A total of 642 inpatients with a mean age of 79.47 years (76-103 years) were categorized into three groups according to the medical history of dementia, and Mini-Mental State Examination (MMSE) scores at admission. Among them, 74 had dementia diagnosis (DD), 310 had cognitive impairment (CI), and 258 had normal MMSE scores. Patients with DD and CI generally had a higher risk of many geriatric syndromes, such as multimorbidities, polypharmacy, delirium, incontinence, visual and auditory impairment, fall history, physical frailty. They had less BI score, BI score change, and proportion of positive BI score change ADL at discharge. (DD 70.0%, CI 79.0%), suggesting less ADL change during hospitalization compared with those with normal MMSE scores (92.9%; p < 0.001). Using multiple regression analysis, we found that among patients with DD and CI, age (p = 0.008) and walking speed (p = 0.023) were predictors of discharge BI score. In addition, age (p = 0.047) and education level were associated with dichotomized BI score change (positive vs. non-positive) during hospitalization. Furthermore, the number and severity of comorbidities predicted LOS (p < 0.001) and readmission (p = 0.001) in patients with cognitive disorders. It is suggested that appropriate strategies are required to improve clinical outcomes in these patients.
Subject(s)
Cognition Disorders , Cognitive Dysfunction , Activities of Daily Living , Aged , Cognition Disorders/epidemiology , Cognitive Dysfunction/epidemiology , Hospitalization , Humans , InpatientsABSTRACT
OBJECTIVE: This study aimed to develop and validate a machine learning-based short measure to assess 5 functions (the ML-5F) (activities of daily living [ADL], balance, upper extremity [UE] and lower extremity [LE] motor function, and mobility) in patients with stroke. DESIGN: Secondary data from a previous study. A follow-up study assessed patients with stroke using the Barthel Index (BI), Postural Assessment Scale for Stroke (PASS), and Stroke Rehabilitation Assessment of Movement (STREAM) at hospital admission and discharge. SETTING: A rehabilitation unit in a medical center. PARTICIPANTS: Patients (N=307) with stroke. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: The BI, PASS, and STREAM. RESULTS: A machine learning algorithm, Extreme Gradient Boosting, was used to select 15 items from the BI, PASS, and STREAM, and transformed the raw scores of the selected items into the scores of the ML-5F. The ML-5F demonstrated good concurrent validity (Pearson's r, 0.88-0.98) and responsiveness (standardized response mean, 0.28-1.01). CONCLUSIONS: The ML-5F comprises only 15 items but demonstrates sufficient concurrent validity and responsiveness to assess ADL, balance, UE and LE functions, and mobility in patients with stroke. The ML-5F shows great potential as an efficient outcome measure in clinical settings.