Investigating the moisture sorption behavior of amorphous sucrose using a dynamic humidity generating instrument.

The moisture sorption behavior of freeze-dried amorphous sucrose was investigated using a dynamic humidity generating instrument, the Dynamic Vapor Sorption (DVS) instrument. The kinetic moisture sorption profiles of freeze-dried amorphous sucrose samples with 29% crystalline content were obtained using the DVS instrument at 9 relative humidity (RH) values, ranging from 10% to 90%, at 25 degrees C. Moisture-induced crystallization was observed for %RH values between 40% and 80%, where the crystallization onset time decreased as %RH increased. The moisture sorption behavior of freeze-dried amorphous sucrose with 3 crystalline contents, 23%, 29%, and 80%, was also compared, revealing that the crystalline content had a significant impact on the pseudo-sorption isotherm of freeze-dried amorphous sucrose. In general, for %RH values below 90%, samples that had a lower percent crystalline content had a higher pseudo-equilibrium moisture content, with the difference becoming most pronounced for the 60% to 80% RH values. The moisture-induced crystallization results as a function of %RH obtained in this study were compared to those previously reported in the literature, leading to an extensive discussion of both the experimental protocols used and the hypothesized mechanisms governing the long-term stability of amorphous materials. The hypothesized mechanisms discussed included the glass transition temperature boundary, the zero mobility temperature, and the hydration limit. Based on the dissimilarity in these hypothesized mechanisms, additional theoretical and experimental exploration is still merited in order to adequately predict the conditions (for example, moisture content, %RH, and temperature) required to ensure long-term stability of amorphous solids.

Relationship between physical properties and sensory attributes of carbonated beverages.

Bulk sweeteners provide functional properties in beverages, including sweet taste, bulking, bitter masking, structure, and mouthfeel. Diet beverages come closer to the taste of regular beverages using a blend of high-intensity sweeteners; however, some properties, including bulking, structure, and mouthfeel, remain significantly different. Relating physical properties to sensory characteristics is an important step in understanding why mouthfeel differences are apparent in beverages sweetened with alternative sweeteners compared to bulk sweeteners. The objectives of this research were to (1) measure sweetener profile, Brix, refractive index, viscosity, a(w), carbonation, titratable acidity, and pH of commercial carbonated beverages; and (2) correlate the physical property measurements to descriptive analysis of the beverages. Correlation analysis, partial least squares, canonical correlation analysis, and cluster analysis were used to analyze the data. Brix, viscosity, and sweet taste were highly correlated among one another and were all negatively correlated to a(w). Carbonated and decarbonated pH were highly correlated to each other and were both negatively correlated to mouthcoating. Numbing, burn, bite, and carbonation were highly correlated to total acidity, citric acid, and ascorbic acid and negatively correlated to phosphoric acid. The mouthfeel difference between diet and regular lemon/lime carbonated beverages is small and may be related to overall differences between flavor, acid, and sweetener types and usage levels. This research is significant because it demonstrates the use of both sensory attributes and physical properties to identify types of ingredients and levels that may decrease the mouthfeel perception differences between regular and diet carbonated beverages, which could consequently lead to higher acceptance of diet beverages by the consumers of regular.

Consensus and comprehensive linkage maps of bovine chromosome 24.

This study describes development of a consensus genetic linkage map of bovine chromosome 24 (BTA24). Eight participating laboratories contributed data for 58 unique markers including a total of 25 409 meioses. Eighteen markers, which were typed in more than one reference population, were used as potential anchors to generate a consensus framework map. The framework map contained 16 loci ordered with odds greater than 1000:1 and spanned 79.3 cM. Remaining markers were included in a comprehensive map relative to these anchors. The resulting BTA24 comprehensive map was 98.3 cM in length. Average marker intervals were 6.1 and 2.5 cM for framework and comprehensive maps, respectively. Marker order was generally consistent with previously reported BTA24 linkage maps. Only one discrepancy was found when comparing the comprehensive map with the published USDA-MARC linkage map. Integration of genetic information from different maps provides a high-resolution BTA24 linkage map.

Development and mapping of microsatellites from a microdissected BTA 11-specific DNA library.

A chromosome-specific library was developed for Bos taurus autosome 11 by chromosome microdissection and microcloning using a bovine primary fibroblast culture, obtained from a t(X;23) heifer, that spontaneously developed a translocation chromosome involving bovine chromosome 11. The library was screened using (AC)12 oligos, positive clones selected, sequenced and primers developed to generate bovine chromosome 11-specific microsatellite markers. This study suggests that chromosome-specific libraries have great potential for development of microsatellite markers for the construction of marker-saturated linkage maps for each chromosome.

Comparative mapping of BTA15 and HSA11 including a region containing a QTL for meat tenderness.

The starting point of the present study was the reported identification of a chromosomal region on bovine Chromosome (Chr) 15 (BTA15) carrying loci affecting meat tenderness. A comparative linkage map of BTA15 and human Chr 11 (HSA11) was constructed to identify potential positional candidate genes and to provide a resource of genetic markers to support marker-assisted selection (MAS). Relative rearrangements between the bovine and human genomes for these chromosomes are the most complex observed in comparative mapping between the two species, with nine alternating blocks of conserved synteny between HSA11 and bovine Chrs 15 and 29. The results of this study were the addition of nine genes to the HSA11/BTA15 comparative linkage map, and development of five microsatellite markers within the quantitative trait locus (QTL) interval. One gene with known effects on muscle development (MYOD1) was mapped to the interval. A second gene (CALCA) involved in regulation of calcium levels, a key factor in postmortem tenderization, also mapped within the interval. Refinement of the comparative map and QTL position will reduce the interval on the human transcription map to be scanned in search of candidates, reducing the effort and resources required to identify the allelic variation responsible for the genetic effect.

Comprehensive linkage map of bovine chromosome 27.

The results of genotypic data contributed to the International Society for Animal Genetics (ISAG) Bovine Chromosome 27 Workshop are presented. Eight laboratories contributed 23 261 informative meioses from 44 loci. Eighteen loci were typed by at least two laboratories and were used to construct a consensus linkage map. Twenty-one loci were subsequently incorporated into a comprehensive map. The sex-averaged consensus map covered 66.9 cM. The sex-averaged comprehensive map was 75.5 cM, while the female and male maps were 73.1 and 63.7 cM, respectively. Five loci were excluded from the analysis because of ambiguous position in the linkage group and a low LOD score (less than 2.0). Average distance between loci in the comprehensive map was 1.98 cM.

Comprehensive linkage map of bovine chromosome 11.

The results of genotypic data contributed to the International Society of Animal Genetics (ISAG) Bovine Chromosome 11 (BTA11) Workshop are presented. Six laboratories contributed a total of 26 199 informative meioses from 80 loci. Thirty-six loci were typed by at least two independent laboratories and were used to construct a consensus linkage map of the chromosome. The remaining loci were subsequently incorporated into a comprehensive map. The sex-averaged consensus map covered 128.9 cM. The female consensus map was 101.2 cM, while the male consensus map was 129.8 cM. The comprehensive sex-averaged map was 134.2 cM and the average genetic distance between loci was 1.72 cM.

A comprehensive search for quantitative trait loci affecting growth and carcass composition of cattle segregating alternative forms of the myostatin gene.

The objective of this study was to identify quantitative trait loci for economically important traits in two families segregating an inactive copy of the myostatin gene. Two half-sib families were developed from a Belgian Blue x MARC III (n = 246) and a Piedmontese x Angus (n = 209) sire. Traits analyzed were birth, weaning, and yearling weight (kg); preweaning average daily gain (kg/d); postweaning average daily gain (kg/d); hot carcass weight (kg); fat depth (cm); marbling score; longissimus muscle area (cm2); estimated kidney, pelvic, and heart fat (%); USDA yield grade; retail product yield (%); fat yield (%); and wholesale rib-fat yield (%). Meat tenderness was measured as Warner-Bratzler shear force at 3 and 14 d postmortem. The effect of the myostatin gene was removed using phase information from six microsatellite markers flanking the locus. Interactions of the myostatin gene with other loci throughout the genome were also evaluated: The objective was to use markers in each family, scanning the genome approximately every 25 to 30 centimorgans (cM) on 18 autosomal chromosomes, excluding 11 autosomal chromosomes previously analyzed. A total of 89 markers, informative in both families, were used to identify genomic regions potentially associated with each trait. In the family of Belgian Blue inheritance, a significant QTL (expected number of false-positives = 0.025) was identified for marbling score on chromosome 3. Suggestive QTL for the same family (expected number of false-positives = 0.5) were identified for retail product yield on chromosome 3, for hot carcass weight and postweaning average daily gain on chromosome 4, for fat depth and marbling score on chromosome 8, for 14-d Warner-Bratzler shear force on chromosome 9, and for marbling score on chromosome 10. Evidence suggesting the presence of an interaction for 3-d Warner-Bratzler shear force between the myostatin gene and a QTL on chromosome 4 was detected. In the family of Piedmontese and Angus inheritance, evidence indicates the presence of an interaction for fat depth between the myostatin gene and chromosome 8, in a similar position where the evidence suggests the presence of a QTL for fat depth in the family with Belgian Blue inheritance. Regions identified underlying QTL need to be assessed in other populations. Although the myostatin gene has a considerable effect, other loci with more subtle effects are involved in the expression of the phenotype.

Estimation of DNA sequence diversity in bovine cytokine genes.

DNA sequence variation provides the fundamental material for improving livestock through selection. In cattle, single nucleotide polymorphisms and small insertions/deletions (collectively referred to here as SNPs) have been identified in cytokine genes and scored in a reference population to determine linkage map positions. The aim of the present study was twofold: first, to estimate the SNP frequency in a reference population of beef cattle, and second, to determine cytokine haplotypes in a group of sires from commercial populations. Forty-five SNP markers in DNA segments from nine cytokine gene loci were analyzed in 26 reference parents. Comparison of all 52 haploid genomes at each PCR amplicon locus revealed an average of one SNP per 143 bp of sequence, whereas comparison of any two chromosomes identified heterozygous sites, on average, every 443 bp. The combination of these 45 SNP genotypes was sufficient to uniquely identify each of the 26 animals. The average number of haplotype alleles (4.4) per PCR amplicon (688 bp) and the percentage heterozygosity among founding parents (50%) were similar to those for microsatellite markers in the same population. For 49 sires from seven common breeds of beef cattle, SNP genotypes (1,225 total) were obtained by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) at three amplicon loci. All three of the amplicon haplotypes were correctly deduced for each sire without the use of parent or progeny genotypes. The latter allows a wide range of genetic studies in commercial populations of cattle where genotypic information from relatives may not be available.

Efficient computation of genotype probabilities for loci with many alleles: I. Allelic peeling.

Genetic marker data are likely to be obtained from a relatively small proportion of the individuals in many livestock populations. Information from genetic markers can be extrapolated to related individuals without marker data by computing genotype probabilities using an algorithm referred to as peeling. However, genetic markers may have many alleles and the number of computations in traditional peeling algorithms is proportional to the number of alleles raised to the sixth or eighth power, depending on pedigree structure. An alternative algorithm for computing genotype probabilities of marker loci with many alleles in large, nonlooped pedigrees with incomplete marker data is presented. The algorithm is based on recursive computations depending on alleles instead of genotypes, as in traditional peeling algorithms. The number of computations in the allelic peeling algorithm presented here is proportional to the square of the number of alleles, which makes this algorithm more computationally efficient than traditional peeling for loci with many alleles. Memory requirements are roughly proportional to the number of individuals in the pedigree and the number of alleles. The recursive allelic peeling algorithm cannot be applied to pedigrees that include full sibs or loops. However, it is a preliminary step toward a more complex and encompassing iterative approach to be described in a companion paper.

Efficient computation of genotype probabilities for loci with many alleles: II. Iterative method for large, complex pedigrees.

An algorithm for computing genotype probabilities for marker loci with many alleles in large, complex pedigrees with missing marker data is presented. The algorithm can also be used to calculate grandparental origin probabilities, which summarize the segregation pattern and are useful for mapping quantitative trait loci. The algorithm is iterative and is based on peeling on alleles instead of the traditional peeling on genotypes. This makes the algorithm more computationally efficient for loci with many alleles. The algorithm is approximate in pedigrees that contain loops, including loops generated by full sibs. The algorithm has no restrictions on pedigree structure or missing marker phenotypes, although together those factors affect the degree of approximation. In livestock pedigrees with dense marker data, the degree of approximation may be minimal. The algorithm can be used with an incomplete penetrance model for marker loci. Thus, it takes into account the possibility of marker scoring errors and helps to identify them. The algorithm provides a computationally feasible method to analyze genetic marker data in large, complex livestock pedigrees.

Bovine CAPN1 maps to a region of BTA29 containing a quantitative trait locus for meat tenderness.

Micromolar calcium activated neural protease (CAPN1) was investigated as a potential candidate gene for a quantitative trait locus (QTL) on BTA29 affecting meat tenderness. A 2,948-bp bovine cDNA containing the entire coding region of the gene was obtained, showing 91% identity to human CAPN1. The 716 AA protein predicted from this sequence shows 97% similarity (95% identity) to the 714 AA human protein. Analysis of the gene structure revealed that CAPN1 mRNA is encoded by at least 19 exons, and 11,055 bp of the gene were sequenced, including 17 introns. Two single nucleotide polymorphisms (SNP) were detected in intron 12 and were used to map bovine CAPN1 to the telomeric end of the BTA29 linkage group. This approximately coincides with the position of the QTL, demonstrating that CAPN1 protease is a positional candidate gene potentially affecting variation in meat tenderness in a bovine resource mapping population.

Comparative mapping of the ovine clpg locus.

We used a comparative mapping approach to identify segments of conserved synteny between human Chromosome 14 (HSA14), bovine Chromosome 21 (BTA21), and the portion of ovine Chromosome 18 (OAR18) that contains the clpg locus. A bovine radiation hybrid map of the region was constructed with available Type II genetic markers and seven candidate genes to establish the comparative interval between BTA21 and HSA14. We developed polymorphic microsatellite and SNP markers associated with five candidate genes and placed them on the ovine and/or bovine genetic maps by multipoint linkage analysis. Three additional genes were mapped by virtue of their physical linkage to genetically mapped makers. Development of integrated linkage and physical maps facilitates the selection of positional candidate genes from the gene rich human map. The physically linked candidate genes PREF-1 and MEG3 map to the interval containing the clpg locus. Comparative biology suggests imprinting of MEG3 and/or the influences of PREF-1 on cellular differentiation, should be examined for their role in the parent-of-origin dependent influence of mutant clpg alleles on sheep muscle characteristics.

Comparative map alignment of BTA27 and HSA4 and 8 to identify conserved segments of genome containing fat deposition QTL.

Quantitative trait loci (QTL) associated with fat deposition have been identified on bovine Chromosome 27 (BTA27) in two different cattle populations. To generate more informative markers for verification and refinement of these QTL-containing intervals, we initiated construction of a BTA27 comparative map. Fourteen genes were selected for mapping based on previously identified regions of conservation between the cattle and human genomes. Markers were developed from the bovine orthologs of genes found on human Chromosomes 1 (HSA1), 4, 8, and 14. Twelve genes were mapped on the bovine linkage map by using markers associated with single nucleotide polymorphisms or microsatellites. Seven of these genes were also anchored to the physical map by assignment of fluorescence in situ hybridization probes. The remaining two genes not associated with an identifiable polymorphism were assigned only to the physical map. In all, seven genes were mapped to BTA27. Map information generated from the other seven genes not syntenic with BTA27 refined the breakpoint locations of conserved segments between species and revealed three areas of disagreement with the previous comparative map. Consequently, portions of HSA1 and 14 are not conserved on BTA27, and a previously undefined conserved segment corresponding to HSA8p22 was identified near the pericentromeric region of BTA8. These results show that BTA27 contains two conserved segments corresponding to HSA8p, which are separated by a segment corresponding to HSA4q. Comparative map alignment strongly suggests the conserved segment orthologous to HSA8p21-q11 contains QTL for fat deposition in cattle.

Linkage mapping and comparative analysis of bovine expressed sequence tags (ESTs).

Bovine expressed sequence tags (ESTs) containing microsatellites are suitable markers for both linkage and comparative maps. We isolated clones from a bovine fetal thigh skeletal muscle cDNA library that were positive for a (CA)10 probe. Thirty individual clones were isolated and characterised by sequencing. Sequences from the 5' and 3' ends of a clone were considered as separate ESTs until a contiguous sequence was identified. A total of 47 ESTs were sequenced from the 5' and/or 3' ends and full sequence was obtained for the 30 clones. BLAST nucleotide analysis identified significant homology to known mammalian coding regions for 31 of the bovine ESTs, 30 of which also matched human ESTs or sequence-tagged sites (STS). The remaining 16 bovine ESTs represented novel transcripts. Microsatellites were isolated in 27 of the ESTs, 11 of which were developed into markers and placed on the MARC bovine linkage map. Human cytogenetic map positions were available for 20 of the 30 human EST orthologs, and a putative bovine map position for 17 of the sequences could be inferred using comparative mapping data. These results demonstrated that mapping bovine ESTs containing microsatellites is a plausible strategy to increase the density of gene markers on the bovine linkage and comparative maps.

Consensus and comprehensive linkage maps of bovine chromosome 7.

The objective of this project was to integrate the currently available linkage maps for bovine chromosome 7 (BTA7) by combining data sets from eight research groups. A total of 54 unique markers were typed in eight pedigrees. Multilocus linkage analysis with CRI-MAP produced a bovine chromosome 7 consensus framework map of 27 loci ordered with odds greater than 1000:1. Furthermore, we present a bovine chromosome 7 comprehensive map integrating 54 loci. The locus order is in general agreement with the recently published linkage maps except for one discrepancy. The order of loci BM9289, BMS713, and ILSTS001 was reversed in the consensus framework map relative to the published USDA-MARC bovine chromosome 7 linkage map.