Transmission risks of Omicron BA.5 following inactivated COVID-19 vaccines among children and adolescents in China.

BACKGROUND: As SARS-CoV-2 Omicron variants circulating globally since 2022, assessing the transmission characteristics, and the protection of vaccines against emerging Omicron variants among children and adolescents are needed for guiding the control and vaccination policies. METHODS: We conducted a retrospective cohort study for SARS-CoV-2 infections and close contacts aged <18 years from an outbreak seeded by Omicron BA.5 variants. The secondary attack rate (SAR) was calculated and the protective effects of two doses of inactivated vaccine (mainly Sinopharm /BBIBP-CorV) within a year versus one dose or two doses above a year after vaccination against the transmission and infection of Omicron BA.5 were estimated. RESULTS: A total of 3442 all-age close contacts of 122 confirmed SARS-CoV-2 infections aged 0-17 years were included. The SAR was higher in the household setting and for individuals who received a one-dose inactivated vaccine or those who received a two-dose for more than one year, with estimates of 28.5% (95% credible interval [CrI]: 21.1, 37.7) and 55.3% (95% CrI: 24.4, 84.8), respectively. The second dose of inactivated vaccine conferred substantial protection against all infection and transmission of Omicron BA.5 variants within a year. CONCLUSIONS: Our findings support the rollout of the second dose of inactivated vaccine for children and adolescents during the Omciron BA.5 predominant epidemic phase. Given the continuous emergence of SARS-CoV-2 variants, monitoring the transmission risk and corresponding vaccine effectiveness against SARS-CoV-2 variants among children and adolescents is important to inform control strategy.

Children and adolescents have reported suffering less severe outcomes from the SARS-CoV-2 Omicron variant. However, the risk of transmission and vaccine effectiveness among this population group is not well studied. Here, we used contact tracing data that was collected during an Omicron BA.5 outbreak from Urumqi, China, before the exit of "zero-COVID" measures, to evaluate the spread of SARS-CoV-2 infection among those age under 18 years, and the effectiveness of inactivated vaccine regimens. Our findings indicate there is a high rate of transmission among children and adolescents in a household setting and receiving two doses of inactivated COVID-19 vaccination within a year was more effective than a single dose or two doses given more than a year apart. These findings highlight the importance of tracking transmission and vaccine effectiveness of novel SARS-CoV-2 variants in younger populations to inform control strategies.

Whole Genome Sequence-Based Analyses of Drug Resistance Characteristics, Genetic Diversity, and Transmission Dynamics of Drug-Resistant Mycobacterium tuberculosis in Urumqi City.

Objective: This study aims to analyze the drug resistance spectrum, genetic diversity, and transmission dynamics to provide a basis for the prevention and control of drug-resistant (DR) tuberculosis (TB) epidemics. Methods: This retrospective study is based on routine national drug resistance surveillance. The demographic, epidemiological, and clinical information on DR-TB patients from 2016 to 2021 was collected and used for phenotypic drug susceptibility testing and whole-genome sequencing. Results: It was indicated that L2.2.1 was the dominant lineage in Urumqi. The drug resistance spectrum in Urumqi was narrow, which means more drug combinations can be used for clinical treatment. Furthermore, mutations identification of drug-resistance gene katG, rpoB, embA/B, rrs, rpsL, eis, gyrA/B, folC and tryA are important for clinical drug use. However, mutations in cross-resistance genes rrs have limited guidance for clinical selection of KM, CPM and AK. Moreover, there is an increased risk of cluster transmission of DR-TB, and the difference in clustering rate among L2, L3, and L4 was not statistically significant (χ2 = 2.6410, p = 0.2670). Conclusion: In the Urumqi, DR-TB has a complex prevalence state, a narrow drug resistance spectrum, and a high clustering rate and burden of drug resistance. To reduce the burden of DR-TB, related research should be strengthened, and the development of prevention, control, and treatment strategies should be accelerated.

Efficient Raman Lasing and Raman-Kerr Interaction in an Integrated Silicon Carbide Platform.

Implementing stimulated Raman scattering in a low-loss microresonator could lead to Raman lasing. Here, we report the demonstration of an efficient Raman laser with >50% power efficiency in an integrated silicon carbide platform for the first time. By fine-tuning the free spectral range (FSR) of 43 µm-radius silicon carbide microresonators, the Stokes resonance corresponding to the dominant Raman shift of 777 cm-1 (23.3 THz) is aligned to the center of the Raman gain spectrum, resulting in a low power threshold of 2.5 mW. The peak Raman gain coefficient is estimated to be (0.75 ± 0.15) cm/GW in the 1550 nm band, with an approximate full width at half-maximum of (120 ± 30) GHz. In addition, the microresonator is designed to exhibit normal dispersion at the pump wavelength near 1550 nm while possessing anomalous dispersion at the first Stokes near 1760 nm. At high enough input powers, a Kerr microcomb is generated by the Stokes signal acting as the secondary pump, which then mixes with the pump laser through four-wave mixing to attain a wider spectral coverage. Furthermore, cascaded Raman lasing and the occurrence of multiple Raman shifts, including 204 cm-1 (6.1 THz) and 266 cm-1 (8.0 THz) transitions, are also observed. Finally, we show that the Stokes Raman could also help broaden the spectrum in a Kerr microcomb which has anomalous dispersion at the pump wavelength. Our example of a 100 GHz-FSR microcomb has a wavelength span from 1200 to 1900 nm with 300 mW on-chip power.

Interaction between air pollutants and meteorological factors on pulmonary tuberculosis in northwest China: A case study of eight districts in Urumqi.

Meteorological factors and air pollutants are associated with the spread of pulmonary tuberculosis (PTB), but few studies have examined the effects of their interactions on PTB. Therefore, this study investigated the impact of meteorological factors and air pollutants and their interactions on the risk of PTB in Urumqi, a city with a high prevalence of PTB and a high level of air pollution. The number of new PTB cases in eight districts of Urumqi from 2014 to 2019 was collected, along with data on meteorological factors and air pollutants for the same period. A generalized additive model was applied to explore the effects of meteorological factors and air pollutants and their interactions on the risk of PTB incidence. Segmented linear regression was used to estimate the nonlinear characteristics of the impact of meteorological factors on PTB. During 2014-2019, a total of 14,402 new cases of PTB were reported in eight districts, with March to May being the months of high PTB incidence. The exposure-response curves for temperature (Temp), relative humidity (RH), wind speed (WS), air pressure (AP), and diurnal temperature difference (DTR) were generally inverted "U" shaped, with the corresponding threshold values of - 5.411 °C, 52.118%, 3.513 m/s, 1021.625 hPa, and 8.161 °C, respectively. The effects of air pollutants on PTB were linear and lagged. All air pollutants were positively associated with PTB, except for O3, which was not associated with PTB, and the ER values for the effects on PTB were as follows: 0.931 (0.255, 1.612) for PM2.5, 1.028 (0.301, 1.760) for PM10, 5.061 (0.387, 9.952) for SO2, 2.830 (0.512, 5.200) for NO2, and 5.789 (1.508, 10.251) for CO. Meteorological factors and air pollutants have an interactive effect on PTB. The risk of PTB incidence was higher when in high Temp-high air pollutant, high RH-high air pollutant, high WS-high air pollutant, lowAP-high air pollutant, and high DTR-high air pollutant. In conclusion, both meteorological and pollutant factors had an influence on PTB, and the influence on PTB may have an interaction.

Effectiveness of the booster dose of inactivated COVID-19 vaccine against Omicron BA.5 infection: a matched cohort study of adult close contacts.

BACKGROUND: Although COVID-19 vaccines and their booster regimens protect against symptomatic infections and severe outcomes, there is limited evidence about their protection against asymptomatic and symptomatic infections in real-world settings, particularly when considering that the majority of SARS-CoV-2 Omicron infections were asymptomatic. We aimed to assess the effectiveness of the booster dose of inactivated vaccines in mainland China, i.e., Sinopharm (BBIBP-CorV) and Sinovac (CoronaVac), against Omicron infection in an Omicron BA.5 seeded epidemic. METHODS: Based on an infection-naive but highly vaccinated population in Urumqi, China, the study cohort comprised all 37,628 adults who had a contact history with individuals having SARS-CoV-2 infections, i.e., close contacts, between August 1 and September 7, 2022. To actively detect SARS-CoV-2 infections, RT-PCR tests were performed by local authorities on a daily basis for all close contacts, and a testing-positive status was considered a laboratory-confirmed outcome. The cohort of close contacts was matched at a ratio of 1:5 with the fully vaccinated (i.e., 2 doses) and booster vaccinated groups (i.e., 3 doses) according to sex, age strata, calendar date, and contact settings. Multivariate conditional logistic regression models were adopted to estimate the marginal effectiveness of the booster dose against Omicron BA.5 infection after adjusting for confounding variables. Subgroup analyses were performed to assess vaccine effectiveness (VE) in different strata of sex, age, the time lag from the last vaccine dose to exposure, and the vaccination status of the source case. Kaplan-Meier curves were employed to visualize the follow-up process and testing outcomes among different subgroups of the matched cohort. FINDINGS: Before matching, 37,099 adult close contacts were eligible for cohort enrolment. After matching, the 2-dose and 3-dose groups included 3317 and 16,051 contacts, and the proportions with Omicron infections were 1.03% and 0.62% among contacts in the 2-dose and 3-dose groups, respectively. We estimated that the adjusted effectiveness of the inactivated booster vaccine versus 2 doses against Omicron infection was 35.5% (95% CI 2.0, 57.5). The booster dose provided a higher level of protection, with an effectiveness of 60.2% (95% CI 22.8, 79.5) for 15-180 days after vaccination, but this VE decreased to 35.0% (95% CI 2.8, 56.5) after 180 days. Evidence for the protection of the booster dose was detected among young adults aged 18-39 years, but was not detected for those aged 40 years or older. INTERPRETATION: The receipt of the inactivated vaccine booster dose was associated with a significantly lower Omicron infection risk, and our findings confirmed the vaccine effectiveness (VE) of booster doses against Omicron BA.5 variants. Given the rapid evolution of SARS-CoV-2, we highlight the importance of continuously monitoring the protective performance of vaccines against the genetic variants of SARS-CoV-2, regardless of existing vaccine coverage.

A spacer design strategy for CRISPR-Cas12f1 with single-nucleotide polymorphism mutation resolution capability and its application in the mutations diagnosis of pathogens.

Infectious diseases remain a major global issue in public health. It is important to develop rapid, sensitive, and accurate diagnostic methods to detect pathogens and their mutations. Cas12f1 is an exceptionally compact RNA-guided nuclease and have the potential to fulfill the clinical needs. Based on the interaction between crRNA-SSDNA binary sequence and Cas12f1, here, we addressed the essential features that determine the recognition ability of CRISPR-Cas12f1 single-nucleotide polymorphism (SNP), such as the length of spacer region and the base pairing region that determines the trans-cleavage of ssDNA. A fine-tuning spacer design strategy is also proposed to enhance the SNP recognition capability of CRISPR-Cas12f1. The optimized spacer confers the Cas12f1 system a strong SNP identification capability for viral or bacterial drug-resistance mutations, with a specificity ratio ranging from 19.63 to 110.20 and an admirable sensitivity up to 100  copy/µL. Together, the spacer screening and CRISPR-Cas12f1 based SNP identification method, is sensitive and versatile, and will have a wide application prospect in pathogen DNA mutation diagnosis and other mutation profiling.

Distinguishing the Vaccine Effectiveness of Inactivated BBIBP-CorV Vaccine Booster Against the Susceptibility, Infectiousness, and Transmission of Omicron Stains: A Retrospective Cohort Study in Urumqi, China.

INTRODUCTION: With COVID-19 vaccination rolled out globally, increasing numbers of studies have shown that booster vaccines can enhance an individual's protection against the infection, hospitalization, and death caused by SARS-CoV-2. This study evaluated the effectiveness of COVID-19 vaccine BBIBP-CorV booster against being infected (susceptibility), infecting others (infectiousness), and spreading the disease from one to another (transmission). METHODS: This retrospective cohort study investigated the close contacts of all officially ascertained COVID-19 confirmed cases in Urumqi, China between August 1 and September 7, 2022. Eligible records were divided into four subcohorts based on the vaccination status of both the close contact and their source case: group 2-2, 2-dose contacts seeded by 2-dose source case (as the reference level); group 2-3, 3-dose contacts seeded by 2-dose source case; group 3-2, 2-dose contacts seeded by 3-dose source case; and group 3-3, 3-dose contacts seeded by 3-dose source case. In the four subcohorts, multivariate logistic regression models were used to examine the vaccine effectiveness (VE) for the BBIBP-CorV booster dose. We adjusted for potential confounding variables, including the sex and age of source cases and close contacts, the calendar week of contact history and contact settings. We evaluated the statistical uncertainty using a 95% confidence interval (CI). In addition, we conducted subgroup analyses to evaluate VE by sex. RESULTS: The sample sizes of groups 2-2, 2-3, 3-2, and 3-3 were 1184, 3773, 4723, and 27,136 individuals, respectively. Overall VE against susceptibility (group 2-3 vs 2-2) was 42.1% (95% CI 10.6, 62.5), VE against infectiousness (group 3-2 vs 2-2) was 62.0% (95% CI 37.2, 77.0), and VE against transmission (group 3-3 vs 2-2) was 83.7% (95% CI 75.1, 89.4). In the sex-stratified subgroups, male close contacts showed similar VE compared to the overall. However, among female close contacts, while the booster dose improved VE against infectiousness and VE against susceptibility, the VEs were not significantly different from zero. CONCLUSION: BBIBP-CorV vaccine booster was associated with mild to moderate levels of protection against Omicron susceptibility, infectiousness, and transmission. Real-world assessment of protective performance of COVID-19 vaccines against the risk of Omicron strains is continuously needed, and may provide information that helps vaccination strategy.

Case clustering, contact stratification, and transmission heterogeneity of SARS-CoV-2 Omicron BA.5 variants in Urumqi, China: An observational study.

Background: From August to September 2022, Urumqi, the capital of the Xinjiang Uygur Autonomous Region in China, faced its largest COVID-19 outbreak caused by the emergence of the SARS-CoV-2 Omicron BA.5.2 variants. Although the superspreading of COVID-19 played an important role in triggering large-scale outbreaks, little was known about the superspreading potential and heterogeneity in the transmission of Omicron BA.5 variants. Methods: In this retrospective observational, contact tracing study, we identified 1139 laboratory-confirmed COVID-19 cases of Omicron BA.5.2 variants, and 51 323 test-negative close contacts in Urumqi from 7 August to 7 September 2022. By using detailed contact tracing information and exposure history of linked case-contact pairs, we described stratification in contact and heterogeneity in transmission across different demographic strata, vaccine statuses, and contact settings. We adopted beta-binomial models to characterise the secondary attack rate (SAR) distribution among close contacts and modelled COVID-19 transmission as a branching process with heterogeneity in transmission governed by negative binomial models. Results: After the city lockdown, the mean case cluster size decreased from 2.0 (before lockdown) to 1.6, with decreased proportions of contacts in workplace and community settings compared with household settings. We estimated that 14% of the most infectious index cases generated 80% transmission, whereas transmission in the community setting presented the highest heterogeneity, with 5% index cases seeding 80% transmission. Compared with zero, one, and two doses of inactivated vaccine (Sinopharm), index cases with three doses of vaccine had a lower risk of generating secondary cases in terms of the reproduction number. Contacts of female cases, cases with ages 0-17 years, and household settings had relatively higher SAR. Conclusions: In the context of intensive control measures, active case detection, and relatively high vaccine coverage, but with an infection-naive population, our findings suggested high heterogeneity in the contact and transmission risks of Omicron BA.5 variants across different demographic strata, vaccine statuses, and contact settings. Given the rapid evolution of SARS-CoV-2, investigating the distribution of transmission not only helped promote public awareness and preparedness among high-risk groups, but also highlighted the importance of continuously monitoring the transmission characteristics of genetic variants of SARS-CoV-2.

In situ doping lignin-derived carbon quantum dots on magnetic hydrotalcite for enhanced degradation of Congo Red over a wide pH range and simultaneous removal of heavy metal ions.

A new N, S-CQDs@Fe3O4@HTC composite was prepared by loading N, S carbon quantum dots (N, S-CQDs) derived from lignin on magnetic hydrotalcite (HTC) via an in-situ growth method. The characterization results showed that the catalyst had a mesoporous structure. These pores facilitate the diffusion and mass transfer of pollutant molecules inside the catalyst, allowing them to approach the active site smoothly. The catalyst performed well in the UV degradation of Congo red (CR) over a wide pH range (3-11), with efficiencies over 95.43 % in all cases. Even at a high NaCl content (100 g/L), the catalyst showed extraordinary CR degradation (99.30 %). ESR analysis and free radical quenching experiments demonstrated that OH and O2- were the main active species governing CR degradation. Besides, the composite had outstanding removal efficiency for Cu2+ (99.90 %) and Cd2+ (85.08 %) simultaneously due to the electrostatic attraction between the HTC and metal ions. Moreover, the N, S-CQDs@Fe3O4@HTC had excellent stability and recyclability during five cycles, making it free of secondary contamination. This work provides a new environment-friendly catalyst for the simultaneous removal of multiple pollutants and a waste-to-waste strategy for the value-added utilization of lignin.

Transmission Characteristics and Inactivated Vaccine Effectiveness Against Transmission of SARS-CoV-2 Omicron BA.5 Variants in Urumqi, China.

Importance: In 2022, Omicron variants circulated globally, and Urumqi, China, experienced a COVID-19 outbreak seeded by Omicron BA.5 variants, resulting in the highest number of infections in the city's record before the exit of the zero COVID-19 strategy. Little was known about the characteristics of Omicron variants in mainland China. Objective: To evaluate transmission characteristics of Omicron BA.5 variants and the effectiveness of inactivated vaccine (mainly BBIBP-CorV) against their transmission. Design, Setting, and Participants: This cohort study was conducted using data from an Omicron-seeded COVID-19 outbreak in Urumqi from August 7 to September 7, 2022. Participants included all individuals with confirmed SARS-CoV-2 infections and their close contacts identified between August 7 and September 7, 2022 in Urumqi. Exposures: A booster dose was compared vs 2 doses (reference level) of inactivated vaccine and risk factors were evaluated. Main Outcomes and Measures: Demographic characteristics, timeline records from exposure to laboratory testing outcomes, contact tracing history, and contact setting were obtained. The mean and variance of the key time-to-event intervals of transmission were estimated for individuals with known information. Transmission risks and contact patterns were assessed under different disease-control measures and in different contact settings. The effectiveness of inactivated vaccine against the transmission of Omicron BA.5 was estimated using multivariate logistic regression models. Results: Among 1139 individuals diagnosed with COVID-19 (630 females [55.3%]; mean [SD] age, 37.4 [19.9] years) and 51 323 close contacts who tested negative for COVID-19 (26 299 females [51.2%]; mean [SD] age, 38.4 [16.0] years), the means of generation interval, viral shedding period, and incubation period were estimated at 2.8 days (95% credible interval [CrI], 2.4-3.5 days), 6.7 days (95% CrI, 6.4-7.1 days), and 5.7 days (95% CrI, 4.8-6.6 days), respectively. Despite contact tracing, intensive control measures, and high vaccine coverage (980 individuals with infections [86.0%] received ≥2 doses of vaccine), high transmission risks were found in household settings (secondary attack rate, 14.7%; 95% CrI, 13.0%-16.5%) and younger (aged 0-15 years; secondary attack rate, 2.5%; 95% CrI, 1.9%-3.1%) and older age (aged >65 years; secondary attack rate, 2.2%; 95% CrI, 1.5%-3.0%) groups. Vaccine effectiveness against BA.5 variant transmission for the booster-dose vs 2 doses was 28.9% (95% CrI, 7.7%-45.2%) and 48.5% (95% CrI, 23.9%-61.4%) for 15-90 days after booster dose. No protective outcome was detected beyond 90 days after the booster dose. Conclusions and Relevance: This cohort study revealed key transmission characteristics of SARS-CoV-2 as they evolved, as well as vaccine effectiveness against variants. These findings suggest the importance of continuously evaluating vaccine effectiveness against emerging SARS-CoV-2 variants.

Wet-Oxidation-Assisted Chemical Mechanical Polishing and High-Temperature Thermal Annealing for Low-Loss 4H-SiC Integrated Photonic Devices.

Silicon carbide (SiC) has become a promising optical material for quantum photonics and nonlinear photonics during the past decade. In this work, we propose two methods to improve the 4H-SiC thin film quality for SiC integrated photonic chips. Firstly, we develop a wet-oxidation-assisted chemical mechanical polishing (CMP) process for 4H-SiC, which can significantly decrease the surface roughness from 3.67 nm to 0.15 nm, thus mitigating the light scattering loss. Secondly, we find that the thermal annealing of the 4H-SiC devices at 1300 °C can help to decrease the material absorption loss. We experimentally demonstrate that the wet-oxidation-assisted CMP and the high-temperature annealing can effectively increase the intrinsic quality factor of the 4H-SiC optical microring resonators.

Novel Photonic Applications of Silicon Carbide.

Silicon carbide (SiC) is emerging rapidly in novel photonic applications thanks to its unique photonic properties facilitated by the advances of nanotechnologies such as nanofabrication and nanofilm transfer. This review paper will start with the introduction of exceptional optical properties of silicon carbide. Then, a key structure, i.e., silicon carbide on insulator stack (SiCOI), is discussed which lays solid fundament for tight light confinement and strong light-SiC interaction in high quality factor and low volume optical cavities. As examples, microring resonator, microdisk and photonic crystal cavities are summarized in terms of quality (Q) factor, volume and polytypes. A main challenge for SiC photonic application is complementary metal-oxide-semiconductor (CMOS) compatibility and low-loss material growth. The state-of-the-art SiC with different polytypes and growth methods are reviewed and a roadmap for the loss reduction is predicted for photonic applications. Combining the fact that SiC possesses many different color centers with the SiCOI platform, SiC is also deemed to be a very competitive platform for future quantum photonic integrated circuit applications. Its perspectives and potential impacts are included at the end of this review paper.

High-performance silicon carbide polarization beam splitting based on an asymmetric directional couplers for mode conversion.

Polarization manipulation and management are important for 4H-silicon carbide (SiC) integrated photonics, as 4H-SiC has material-based birefringent properties. In this Letter, we propose a low-birefringence polarization beam splitter (PBS) based on asymmetric directional coupler (ADC) mode converters with overall high performances. We numerically and experimentally demonstrate the ADC mode conversion based PBS on a 4H-SiC chip. The experimental results show that the device exhibits high transmittance of -0.6 dB and -1.3 dB for the transverse-electric (TE) and transverse-magnetic (TM) polarized light, respectively, and broad operational bandwidth over 130 nm. The polarization extinction ratio of >25 dB and >17 dB covering the whole C band for the TE and TM polarized light, respectively, and an ultra-large polarization extinction ratio of >32 dB for both polarizations at approximately 1560 nm are achieved.

Lignin microparticles-reinforced cellulose filter paper for simultaneous removal of emulsified oils and dyes.

The presence of multiple pollutants in wastewater, often with complex interactions, poses a significant challenge for conventional membranes to effectively remove multiple pollutants simultaneously. Herein, a lignin microparticles-reinforced cellulose filter paper (FP@AL-LS-DA) was fabricated via an aldol condensation between lignin and cellulose filter paper and cross-linking with dopamine hydrochloride (DA), which showed desired rejection of oil-in-water emulsions and dyes. Characterizations revealed that the addition of lignin and DA effectively narrowed the pore size (from 4.45 µm to 2.01 µm) and enhanced the rigidity and stability of the cellulose filter paper, thus making it not easily damaged in the water environment and showing excellent tolerance to strong acid and high-salt environments. The oil-in-water emulsions removal efficiency was higher than 99 % even after ten times usage, and the oil flux was kept stable at 52.54 L·m-2·h-1, indicating that FP@AL-LS-DA had outstanding reusability and stability. Remarkably, FP@AL-LS-DA showed excellent removal efficiency (>99 %) for complex pollutants containing dyes and oil-in-water emulsions. In this work, we demonstrate a lignin microparticles-reinforced cellulose filter paper that is simple to prepare and can efficiently separate oil-in-water emulsions and remove dyes.

3D porous N-doped lignosulfonate/graphene oxide aerogel for efficient solar steam generation and desalination.

Solar-driven interfacial evaporation has been considered one of the most promising approaches to tackle the issue of water scarcity. The salt resistance and water transport capacity of solar evaporation materials are essential to evaluate desalination performance. Herein, a 3D-porous N-doped lignosulfonate/graphene oxide (GO) aerogel (NLGA) was facilely prepared by a one-step hydrothermal method. By introducing ethylenediamine (EDA) as a nitrogen source, the wettability and water transport capacity of the aerogel were enhanced; by introducing lignosulfonate (LS), its porous structure was regulated, and its light absorption capability was significantly improved. The obtained aerogel exhibited an outstanding evaporation rate (1.57 kg m-2 h-1) and efficiency (95.2 %) under 1 sun illumination, which is significantly better than some reported foam-based solar evaporators. In addition, NLGA maintained a stable evaporation rate over long-term cyclic evaporation without visible salt accumulation on the surface. The good salt rejection performance is due to the rich-pore structure and superhydrophilicity of NGLA, which provides sufficient water supply to dissolve the salts during water evaporation. NLGA has enormous potential as a solar evaporator based on its excellent performance in solar vapor generation.

Corrigendum: Effects of meteorological factors and atmospheric pollution on hand, foot, and mouth disease in Urumqi Region.

[This corrects the article DOI: 10.3389/fpubh.2022.913169.].

Effects and Interaction of Meteorological Factors on Pulmonary Tuberculosis in Urumqi, China, 2013-2019.

Background: Most existing studies have only investigated the delayed effect of meteorological factors on pulmonary tuberculosis (PTB). However, the effect of extreme climate and the interaction between meteorological factors on PTB has been rarely investigated. Methods: Newly diagonsed PTB cases and meteorological factors in Urumqi in each week between 2013 and 2019 were collected. The lag-exposure-response relationship between meteorological factors and PTB was analyzed using the distributed lag non-linear model (DLNM). The generalized additive model (GAM) was used to visualize the interaction between meteorological factors. Stratified analysis was used to explore the impact of meteorological factors on PTB in different stratification and RERI, AP and SI were used to quantitatively evaluate the interaction between meteorological factors. Results: A total of 16,793 newly diagnosed PTB cases were documented in Urumqi, China from 2013 to 2019. The median (interquartile range) temperature, relative humidity, wind speed, and PTB cases were measured as 11.3°C (-5.0-20.5), 57.7% (50.7-64.2), 4.1m/s (3.4-4.7), and 47 (37-56), respectively. The effects of temperature, relative humidity and wind speed on PTB were non-linear, which were found with the "N"-shaped, "L"-shaped, "N"-shaped distribution, respectively. With the median meteorological factor as a reference, extreme low temperature was found to have a protective effect on PTB. However, extreme high temperature, extreme high relative humidity, and extreme high wind speed were found to increase the risk of PTB and peaked at 31.8°C, 83.2%, and 7.6 m/s respectively. According to the existing monitoring data, no obvious interaction between meteorological factors was found, but low temperature and low humidity (RR = 1.149, 95%CI: 1.003-1.315), low temperature and low wind speed (RR = 1.273, 95%CI: 1.146-1.415) were more likely to cause the high incidence of PTB. Conclusion: Temperature, relative humidity and wind speed were found to play vital roles in PTB incidence with delayed and non-linear effects. Extreme high temperature, extreme high relative humidity, and extreme high wind speed could increase the risk of PTB. Moreover, low temperature and low humidity, low temperature and low wind speed may increase the incidence of PTB.

Effects of Meteorological Factors and Atmospheric Pollution on Hand, Foot, and Mouth Disease in Urumqi Region.

Background: Hand, foot, and mouth disease (HFMD) is a febrile rash infection caused by enteroviruses, spreading mainly via the respiratory tract and close contact. In the past two decades, HFMD has been prevalent mainly in Asia, including China and South Korea, causing a huge disease burden and putting the lives and health of children at risk. Therefore, a further study of the factors influencing HFMD incidences has far-reaching implications. In existing studies, the environmental factors affecting such incidences are mainly divided into two categories: meteorological and air. Among these studies, the former are the majority of studies on HFMD. Some scholars have studied both factors at the same, but the number is not large and the findings are quite different. Methods: We collect monthly cases of HFMD in children, meteorological factors and atmospheric pollution in Urumqi from 2014 to 2020. Trend plots are used to understand the approximate trends between meteorological factors, atmospheric pollution and the number of HFMD cases. The association between meteorological factors, atmospheric pollution and the incidence of HFMD in the Urumqi region of northwest China is then investigated using multiple regression models. Results: A total of 16,168 cases in children are included in this study. According to trend plots, the incidence of HFMD shows a clear seasonal pattern, with O3 (ug/m3) and temperature (°C) showing approximately the same trend as the number of HFMD cases, while AQI, PM2.5 (ug/m3), PM10 (ug/m3) and NO2 (ug/m3) all show approximately opposite trends to the number of HFMD cases. Based on multiple regression results, O3 (P = 0.001) and average station pressure (P = 0.037) are significantly and negatively associated with HFMD incidences, while SO2 (P = 0.102), average dew point temperature (P = 0.072), hail (P = 0.077), and thunder (P = 0.14) have weak significant relationships with them.

Development and validation of a nomogram for predicting the risk of mental health problems of factory workers and miners.

OBJECTIVE: A nomogram for predicting the risk of mental health problems was established in a population of factory workers and miners, in order to quickly calculate the probability of a worker suffering from mental health problems. METHODS: A cross-sectional survey of 7500 factory workers and miners in Urumqi was conducted by means of an electronic questionnaire using cluster sampling method. Participants were randomly assigned to the training group (70%) and the validation group (30%). Questionnaire-based survey was conducted to collect information. A least absolute shrinkage and selection operator (LASSO) regression model was used to screen the predictors related to the risk of mental health problems of the training group. Multivariate logistic regression analysis was applied to construct the prediction model. Calibration plots and receiver operating characteristic-derived area under the curve (AUC) were used for model validation. Decision curve analysis was applied to calculate the net benefit of the screening model. RESULTS: A total of 7118 participants met the inclusion criteria and the data were randomly divided into a training group (n=4955) and a validation group (n=2163) in a ratio of 3:1. A total of 23 characteristics were included in this study and LASSO regression selected 12 characteristics such as education, professional title, age, Chinese Maslach Burnout Inventory, effort-reward imbalance, asbestos dust, hypertension, diabetes, working hours per day, working years, marital status and work schedule as predictors for the construction of the nomogram. In the validation group, the Brier score was 0.176, the calibration slope was 0.970 and the calibration curve of nomogram showed a good fit. The AUC of training group and verification group were 0.785 and 0.784, respectively. CONCLUSION: The nomogram combining these 12 characteristics can be used to predict the risk of suffering mental health problems, providing a useful tool for quickly and accurately screening the risk of mental health problems.

A Highly Sensitive and Specific Detection Method for Mycobacterium tuberculosis Fluoroquinolone Resistance Mutations Utilizing the CRISPR-Cas13a System.

Objectives: CRISPR-Cas13a system-based nucleic acid detection methods are reported to have rapid and sensitive DNA detection. However, the screening strategy for crRNAs that enables CRISPR-Cas13a single-base resolution DNA detection of human pathogens remains unclear. Methods: A combined rational design and target mutation-anchoring CRISPR RNA (crRNA) screening strategy was proposed. Results: A set of crRNAs was found to enable the CRISPR-Cas13 system to dramatically distinguish fluroquinolone resistance mutations in clinically isolated Mycobacterium tuberculosis strains from the highly homologous wild type, with a signal ratio ranging from 8.29 to 38.22 in different mutation sites. For the evaluation of clinical performance using genomic DNA from clinically isolated M. tuberculosis, the specificity and sensitivity were 100 and 91.4%, respectively, compared with culture-based phenotypic assays. Conclusion: These results demonstrated that the CRISPR-Cas13a system has potential for use in single nucleotide polymorphism (SNP) detection after tuning crRNAs. We believe this crRNA screening strategy will be used extensively for early drug resistance monitoring and guidance for clinical treatment.