Injectable Hydrogel Based on Liposome Self-Assembly for Controlled Release of Small Hydrophilic Molecules.

Controlled release of low molecular weight hydrophilic drugs, administered locally, allows maintenance of high concentrations at the target site, reduces systemic side effects, and improves patient compliance. Injectable hydrogels are commonly used as a vehicle. However, slow release of low molecular weight hydrophilic drugs is very difficult to achieve, mainly due to a rapid diffusion of the drug out of the drug delivery system. Here we present an injectable and self-healing hydrogel based entirely on the self-assembly of liposomes. Gelation of liposomes, without damaging their structural integrity, was induced by modifying the cholesterol content and surface charge. The small hydrophilic molecule, sodium fluorescein, was loaded either within the extra-liposomal space or encapsulated into the aqueous cores of the liposomes. This encapsulation strategies enabled the achievement of controlled and adjustable release profiles, dependent on the mechanical strength of the gel. The hydrogel had a high mechanical strength, minimal swelling, and slow degradation. The liposome-based hydrogel had prolonged mechanical stability in vivo with no local adverse reaction. This work presents a new class of injectable hydrogel that holds promise as a versatile drug delivery system. STATEMENT OF SIGNIFICANCE: The porous nature of hydrogels poses a challenge for delivering small hydrophilic drug, often resulting in initial burst release and shorten duration of release. This issue is particularly pronounced with physically crosslinked hydrogels, since their matrix can swell and dissipate rapidly, but even in cases where the polymers in the hydrogel are covalently cross-linked, small molecules can be rapidly released through its porous mesh. Here we present an injectable self-healing hydrogel based entirely on the self-assembly of liposomes. Small hydrophilic molecules were entrapped inside the extra-liposomal space or loaded into the aqueous cores of the liposomes, allowing controlled and tunable release profiles.

CryoEM Status Update and Innovative Developments.

ARTICLES DISCUSSED: Truong, C. D. et al. Sample preparation using a lipid monolayer method for electron crystallographic studies. Journal of Visualized Experiments. (177), e63015 (2021). Johnson, M. C., Grant, A. J., Schmidt-Krey, I. The peel-blot technique: A cryo-EM sample preparation method to separate single layers from multi-layered or concentrated biological samples. Journal of Visualized Experiments. (184), e64099 (2022). Chang, Y.-C., Chen, C.-Y., Tsai, M.-D. Preparation of high-temperature sample grids for cryo-EM. Journal of Visualized Experiments. (173), e62772 (2021). Kang, M.-H., Lee, M., Kang, S., Park, J. Fabrication of micro-patterned chip with controlled thickness for high-throughput cryogenic electron microscopy. Journal of Visualized Experiments. (182), e63739 (2022). Bieber, A., Capitanio, C., Wilfling, F., Plitzko, J., Erdmann, P. S. Sample preparation by 3D-correlative focused ion beam milling for high-resolution cryo-electron tomography. Journal of Visualized Experiments. (176), e62886 (2021). DiCecco, L.-A. et al. Advancing high-resolution imaging of virus assemblies in liquid and ice. Journal of Visualized Experiments. (185), e63856 (2022). Kumar, A., P, S., Gulati, S., Dutta, S. User-friendly, high-throughput, and fully automated data acquisition software for single-particle cryo-electron microscopy. Journal of Visualized Experiments. (173), e62832 (2021).

Dipole-Dependent Waveguiding in an Anisotropic Metal-Organic Framework.

The interaction between excitons and photons underlies a range of emergent technologies, such as directional light emission, molecular lasers, photonic circuits, and polaritonic devices. Two of the key parameters that impact exciton-photon coupling are the binding energy of excitons and the relative orientations between the exciton dipole and photon field. Tightly bound excitons are typically found in molecular crystals, where nevertheless the angular relationship of excitons with photon fields is difficult to control. Here, we demonstrate directional exciton dipoles and photon fields, anchored by metal-ligand coordination. In a pyrene-porphyrin bichromophoric metal-organic framework (MOF), we observe that the perpendicular arrangement of the pyrene- and porphyrin-based exciton dipoles engenders orthogonal polarizations of their respective emissions. The alignment of the directional exciton and photon fields gives rise to an anisotropic waveguide effect, where the pyrene- and the porphyrin-based emissions show distinct spatial distribution within microplate-shaped MOF crystals. This capability to simultaneously host heterogenous excitonic states and anisotropic photon fields points toward MOFs' yet-to-be-realized potential as a platform for advancing the frontier in the field of exciton-photonics, which centers around engineering emergent properties from the interplay between excitons and photons.

The cellular environment shapes the nuclear pore complex architecture.

Nuclear pore complexes (NPCs) create large conduits for cargo transport between the nucleus and cytoplasm across the nuclear envelope (NE)1-3. These multi-megadalton structures are composed of about thirty different nucleoporins that are distributed in three main substructures (the inner, cytoplasmic and nucleoplasmic rings) around the central transport channel4-6. Here we use cryo-electron tomography on DLD-1 cells that were prepared using cryo-focused-ion-beam milling to generate a structural model for the human NPC in its native environment. We show that-compared with previous human NPC models obtained from purified NEs-the inner ring in our model is substantially wider; the volume of the central channel is increased by 75% and the nucleoplasmic and cytoplasmic rings are reorganized. Moreover, the NPC membrane exhibits asymmetry around the inner-ring complex. Using targeted degradation of Nup96, a scaffold nucleoporin of the cytoplasmic and nucleoplasmic rings, we observe the interdependence of each ring in modulating the central channel and maintaining membrane asymmetry. Our findings highlight the inherent flexibility of the NPC and suggest that the cellular environment has a considerable influence on NPC dimensions and architecture.

Programmable Anisotropy and Percolation in Supramolecular Patchy Particle Gels.

Patchy particle interactions are predicted to facilitate the controlled self-assembly and arrest of particles into phase-stable and morphologically tunable "equilibrium" gels, which avoids the arrested phase separation and subsequent aging that is typically observed in traditional particle gels with isotropic interactions. Despite these promising traits of patchy particle interactions, such tunable equilibrium gels have yet to be realized in the laboratory due to experimental limitations associated with synthesizing patchy particles in high yield. Here, we introduce a supramolecular metal-coordination platform consisting of metallic nanoparticles linked by telechelic polymer chains, which validates the predictions associated with patchy particle interactions and facilitates the design of equilibrium particle hydrogels through limited valency interactions. We demonstrate that the interaction valency and self-assembly of the particles can be effectively controlled by adjusting the relative concentration of polymeric linkers to nanoparticles, which enables the gelation of patchy particle hydrogels with programmable local anisotropy, morphology, and low mechanical percolation thresholds. Moreover, by crowding the local environment around the patchy particles with competing interactions, we introduce an independent method to control the self-assembly of the nanoparticles, thereby enabling the design of highly anisotropic particle hydrogels with substantially reduced percolation thresholds. We thus establish a canonical platform that facilitates multifaceted control of the self-assembly of the patchy nanoparticles en route to the design of patchy particle gels with tunable valencies, morphologies, and percolation thresholds. These advances lay important foundations for further fundamental studies of patchy particle systems and for designing tunable gel materials that address a wide range of engineering applications.

Multi-scale 3D Cryo-Correlative Microscopy for Vitrified Cells.

Three-dimensional (3D) visualization of vitrified cells can uncover structures of subcellular complexes without chemical fixation or staining. Here, we present a pipeline integrating three imaging modalities to visualize the same specimen at cryogenic temperature at different scales: cryo-fluorescence confocal microscopy, volume cryo-focused ion beam scanning electron microscopy, and transmission cryo-electron tomography. Our proof-of-concept benchmark revealed the 3D distribution of organelles and subcellular structures in whole heat-shocked yeast cells, including the ultrastructure of protein inclusions that recruit fluorescently-labeled chaperone Hsp104. Since our workflow efficiently integrates imaging at three different scales and can be applied to other types of cells, it could be used for large-scale phenotypic studies of frozen-hydrated specimens in a variety of healthy and diseased conditions with and without treatments.

A Micro-CT-based Method for Characterizing Lesions and Locating Electrodes in Small Animal Brains.

Lesion and electrode location verification are traditionally done via histological examination of stained brain slices, a time-consuming procedure that requires manual estimation. Here, we describe a simple, straightforward method for quantifying lesions and locating electrodes in the brain that is less laborious and yields more detailed results. Whole brains are stained with osmium tetroxide, embedded in resin, and imaged with a micro-CT scanner. The scans result in 3D digital volumes of the brains with resolutions and virtual section thicknesses dependent on the sample size (12-15 and 5-6 µm per voxel for rat and zebra finch brains, respectively). Surface and deep lesions can be characterized, and single tetrodes, tetrode arrays, electrolytic lesions, and silicon probes can also be localized. Free and proprietary software allows experimenters to examine the sample volume from any plane and segment the volume manually or automatically. Because this method generates whole brain volume, lesions and electrodes can be quantified to a much higher degree than in current methods, which will help standardize comparisons within and across studies.

A micro-CT-based method for quantitative brain lesion characterization and electrode localization.

Lesion verification and quantification is traditionally done via histological examination of sectioned brains, a time-consuming process that relies heavily on manual estimation. Such methods are particularly problematic in posterior cortical regions (e.g. visual cortex), where sectioning leads to significant damage and distortion of tissue. Even more challenging is the post hoc localization of micro-electrodes, which relies on the same techniques, suffers from similar drawbacks and requires even higher precision. Here, we propose a new, simple method for quantitative lesion characterization and electrode localization that is less labor-intensive and yields more detailed results than conventional methods. We leverage staining techniques standard in electron microscopy with the use of commodity micro-CT imaging. We stain whole rat and zebra finch brains in osmium tetroxide, embed these in resin and scan entire brains in a micro-CT machine. The scans result in 3D reconstructions of the brains with section thickness dependent on sample size (12-15 and 5-6 microns for rat and zebra finch respectively) that can be segmented manually or automatically. Because the method captures the entire intact brain volume, comparisons within and across studies are more tractable, and the extent of lesions and electrodes may be studied with higher accuracy than with current methods.

Reconstruction of genetically identified neurons imaged by serial-section electron microscopy.

Resolving patterns of synaptic connectivity in neural circuits currently requires serial section electron microscopy. However, complete circuit reconstruction is prohibitively slow and may not be necessary for many purposes such as comparing neuronal structure and connectivity among multiple animals. Here, we present an alternative strategy, targeted reconstruction of specific neuronal types. We used viral vectors to deliver peroxidase derivatives, which catalyze production of an electron-dense tracer, to genetically identify neurons, and developed a protocol that enhances the electron-density of the labeled cells while retaining the quality of the ultrastructure. The high contrast of the marked neurons enabled two innovations that speed data acquisition: targeted high-resolution reimaging of regions selected from rapidly-acquired lower resolution reconstruction, and an unsupervised segmentation algorithm. This pipeline reduces imaging and reconstruction times by two orders of magnitude, facilitating directed inquiry of circuit motifs.

The multilayered interlaced network (MIN) in the sporoplasm of the microsporidium Anncaliia algerae is derived from Golgi.

This study provides evidence for the Golgi-like activity of the multilayered interlaced network (MIN) and new ultrastructural observations of the MIN in the sporoplasm of Anncaliia algerae, a microsporidium that infects both insects and humans. The MIN is attached to the end of the polar tubule upon extrusion from the germinating spore. It surrounds the sporoplasm, immediately below its plasma membrane, and most likely maintains the integrity of the sporoplasm, as it is pulled through the everting polar tube. Furthermore, the MIN appears to deposit its dense contents on the surface of the sporoplasm within minutes of spore discharge thickening the plasma membrane. This thickening is characteristic of the developmental stages of the genus Anncaliia. The current study utilizes transmission electron microscopy (TEM), enzyme histochemistry, and high voltage TEM (HVEM) with 3D tomographic reconstruction to both visualize the structure of the MIN and demonstrate that the MIN is a Golgi-related structure. The presence of developmentally regulated Golgi in the Microsporidia has been previously documented. The current study extends our understanding of the microsporidial Golgi and is consistent with the MIN being involved in the extracellular secretion in Anncaliia algerae. This report further illustrates the unique morphology of the MIN as illustrated by HVEM using 3D tomography.