Recovery of Spinal Walking in Paraplegic Dogs Using Physiotherapy and Supportive Devices to Maintain the Standing Position.

Paraplegic patients have always been ideal candidates for physiotherapy due to their body's inability to recover on its own. Regardless of the cause that led to the onset of paraplegia (traumatic or degenerative), physiotherapy helps these patients with devices and methods designed to restore the proper functioning of their motility, as well as their quality of life. A total of 60 paraplegic dogs without deep pain in the hindlimbs caused by intervertebral disc extrusion or thoracolumbar fractures underwent physiotherapy sessions: manual therapy (massage), electrostimulation (10-20 min with possible repetition on the same day), ultrasound therapy, laser therapy, hydrotherapy, and assisted gait in supportive devices or on treadmills to stimulate and relearn walking, which was the main focus of the study. To maintain the standing position over time, we developed different devices adapted for each patient depending on the degree of damage and the possible associated pathologies: harnesses, trolleys, straps, exercise rollers, balancing platforms and mattresses, physio balls and rollers for recovery of proprioception. The main objective of our study was to demonstrate that physiotherapy and assisted gait in supportive devices to maintain the standing position may help paraplegic dogs to develop spinal walking. Concurrent pathologies (skin wounds, urinary infections, etc.) were managed concomitantly. Recovery of SW was evaluated by progression in regaining the reflectivity, nociception, gait score, and quality of life. After 125 to 320 physiotherapy sessions (25 to 64 weeks), 35 dogs (58.33%) developed spinal walking and were able to walk without falling or falling only sometimes in the case of a quick look (gait score 11.6 ± 1.57, with 14 considered normal), with a lack of coordination between the thoracic and pelvic limbs or difficulties in turning, especially when changing direction, but with the recovery of the quadrupedal position in less than 30 s. The majority of dogs recovering SW were of small size, with a median weight of 6.83 kg (range: 1.5-15.7), mixed breed (n = 9; 25.71%), Teckel (n = 4; 11.43%), Bichon (n = 5; 14.28%), Pekingese (n = 4; 11.43%), and Caniche (n = 2; 5.71%), while those who did not recover SW were larger in size, 15.59 kg (range: 5.5-45.2), and mixed breed (n = 16; 64%).

Long-Term Examination of Degradation and In Vivo Biocompatibility of Some Mg-0.5Ca-xY Alloys in Sprague Dawley Rats.

The medical field has undergone constant development in recent years, and a segment of this development is occupied by biodegradable alloys. The most common alloys in this field are those based on Mg, their main advantage being the ability to degrade gradually, without affecting the patient, and also their ability to be fully absorbed by the human body. One of their most important conditions is the regeneration and replacement of human tissue. Tissue can be engineered in different ways, one being tissue regeneration in vivo, which can serve as a template. In vivo remodeling aims to restore tissue or organs. The key processes of tissue formation and maturation are: proliferation (sorting and differentiation of cells), proliferation and organization of the extracellular matrix, biodegradation of the scaffold-remodeling, and potential tissue growth. In the present paper, the design of the alloys in the Mg-Ca-Y system is formed from the beginning using high-purity components, Mg-98.5%, master-alloys: Mg-Y (70 wt.%-30 wt.%) and Mg-Ca (85 wt.%-15 wt.%). After 8 weeks of implantation, the degradation of the implanted material is observed, and only small remaining fragments are found. At the site of implantation, no inflammatory reaction is observed, but it is observed that the process of integration and reabsorption, over time, accentuates the prosaic surface of the material. The aim of the work is to test the biocompatibility of magnesium-based alloys on laboratory rats in order to use these alloys in medical applications. The innovative parts of these analyses are the chemical composition of the alloys used and the tests performed on laboratory animals.

Novel Mg-0.5Ca-xMn Biodegradable Alloys Intended for Orthopedic Application: An In Vitro and In Vivo Study.

Mg-based biodegradable materials, used for medical applications, have been extensively studied in the past decades. The in vitro cytocompatibility study showed that the proliferation and viability (as assessed by quantitative MTT-assay-3-(4,5-dimethyltiazol-2-yl)-2,5-diphenyl tetrazolium bromide) were not negatively affected with time by the addition of Mn as an alloying element. In this sense, it should be put forward that the studied alloys don't have a cytotoxic effect according to the standard ISO 10993-5, i.e., the level of the cells' viability (cultured with the studied experimental alloys) attained both after 1 day and 5 days was over 82% (i.e., 82, 43-89, 65%). Furthermore, the fibroblastic cells showed variable morphology (evidenced by fluorescence microscopy) related to the alloy sample's proximity (i.e., related to the variation on the Ca, Mg, and Mn ionic concentration as a result of alloy degradation). It should be mentioned that the cells presented a polygonal morphology with large cytoplasmic processes in the vicinity of the alloy's samples, and a bipolar morphology in the remote region of the wells. Moreover, the in vitro results seem to indicate that only 0.5% Mn is sufficient to improve the chemical stability, and thus the cytocompatibility; from this point of view, it could provide some flexibility in choosing the right alloy for a specific medical application, depending on the specific parameters of each alloy, such as its mechanical properties and corrosion resistance. In order to assess the in vivo compatibility of each concentration of alloy, the pieces were implanted in four rats, in two distinct body regions, i.e., the lumbar and thigh. The body's reaction was followed over time, 60 days, both by general clinical examinations considering macroscopic changes, and by laboratory examinations, which revealed macroscopic and microscopic changes using X-rays, CT(Computed Tomography), histology exams and SEM (Scanning Electron Microscopy). In both anatomical regions, for each of the tested alloys, deformations were observed, i.e., a local reaction of different intensities, starting the day after surgery. The release of hydrogen gas that forms during Mg alloy degradation occurred immediately after implantation in all five of the groups examined, which did not affect the normal functionality of the tissues surrounding the implants. Imaging examinations (radiological and CT) revealed the presence of the alloy and the volume of hydrogen gas in the lumbar and femoral region in varying amounts. The biodegradable alloys in the Mg-Ca-Mn system have great potential to be used in orthopedic applications.

Detection of Biomedically Relevant Stilbenes from Wines by Mass Spectrometry.

Stilbenes represent a class of compounds with a common 1,2-diphenylethylene backbone that have shown extraordinary potential in the biomedical field. As the most well-known example, resveratrol proved to have anti-aging effects and significant potential in the fight against cardiovascular diseases and some types of cancer. Mass spectrometry is an analytical method of critical importance in all studies related to stilbenes that are important in the biomedical field. From the discovery of new natural compounds and mapping the grape metabolome up to advanced investigations of stilbenes' potential for the protection of human health in clinical studies, mass spectrometry has provided critical analytical information. In this review we focus on various approaches related to mass spectrometry for the detection of stilbenes-such as coupling with chromatographic separation methods and direct infusion-with presentation of some illustrative applications. Clearly, the potential of mass spectrometry for assisting in the discovery of new stilbenes of biomedical importance, elucidating their mechanisms of action and quantifying minute quantities in complex matrices is far from being exhausted.

PC2 Ovotransferrin: Characterization and Alternative Immunotherapeutic Activity.

Characterization and evaluation of immunotherapeutic potential of ovotransferrin PC2 (OTf PC2) were performed in this study. The ovoprotein was obtained from egg white from hens immunized with bacterial antigens, pathogenic for humans. For the negative control samples, OTf was extracted from eggs collected from Specific Pathogen-Free (SPF) hens and purified by affinity chromatography on Protein G-agarose column with two eluting peaks: I, representing ovalbumin, and II, ovotransferrin. The final apo-OTf form was reached by successive precipitation with ammonium sulfate and citric acid and the holo-OTf form by saturating the apo-form with FeCl3. Multiple OTf PC2 samples were analyzed through Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE) and, based on the molecular marker migration model, the ovotransferrin (76.5 kDa) and ovalbumin (45 kDa) were detected. The agglutination reaction exhibited statistically significant high specificity of the multiple OTf PC2, by reacting with the antigens used for hens' immunization. Following ELISA, it was established that OTf PC2 from hyperimmune eggs has specificity for all antigens; the antibody titer was high, indicating that OTf PC2 possesses immunological properties similar to immunoglobulin Y (Ig Y). This study suggests that OTf PC2 immunological activity may play a crucial role in the prevention and treatment of infections resistant to antibiotics and OTf PC2 can also act as a valuable nutraceutical.

Comparative Chemical Analysis of Mentha piperita and M. spicata and a Fast Assessment of Commercial Peppermint Teas.

The hydrodistilled essential oils and volatile compounds (by static headspaces technique) of Mentha piperita L. and M spicata L. were characterized by GC-MS. Headspace analysis of Mentha piperita revealed the existence of menthone (25.4%), 1,8-cineole (17.7%) and menthol (12.1%) as the main components, while the essential oil contained high amounts of menthol (46.8%) and menthone (25.6%). By contrast, headspace analysis of M. spicata showed a high content of limonene (37.0%) together with carvone (13.0%), ß-pinene (10.4%) and α-pinene (9.8%), while the essential oil was reach in carvone (51.7%), dihydrocarveol (11.5%) and cis-dihydrocarvone (9.1%). Eleven samples of peppermint tea available on the Romanian market were analysed by headspace GC-MS. The volatile profile of the tea samples was compared with that of Mentha piperita L. and certain differences were emphasized and discussed.

Versatile SPR aptasensor for detection of lysozyme dimer in oligomeric and aggregated mixtures.

A Surface Plasmon Resonance (SPR) sensor for the quantitation of lysozyme dimer in monomer-dimer mixtures, reaching a detection limit of 1.4nM dimer, has been developed. The sensor is based on an aptamer which, although developed for the monomeric form, binds also the dimeric form but with a strikingly different kinetics. The aptasensor was calibrated using a dimer obtained by cross-linking. Sensorgrams acquired with the aptasensor in monomer-dimer mixtures were analysed using Principal Components Analysis and Multiple Regression to establish correlations with the dimer content in the mixtures. The method allows the detection of 0.1-1% dimer in monomer solutions without any separation. As an application, the aptasensor was used to qualitatively observe the initial stages of aggregation of lysozyme solutions at 60°C and pH 2, through the variations in lysozyme dimer amounts. Several other methods were used to characterize the lysozyme dimer obtained by cross-linking and confirm the SPR results. This work highlights the versatility of the aptasensor, which can be used, by simply tuning the experimental conditions, for the sensitive detection of either the monomer or the dimer and for the observation of the aggregation process of lysozyme.

Detection of biomedically relevant stilbenes from wines by mass spectrometry.

Stilbenes represent a class of compounds with a common 1,2-diphenylethylene backbone that have shown extraordinary potential in the biomedical field. As the most well-known example, resveratrol proved to have anti-aging effects and significant potential in the fight against cardiovascular diseases and some types of cancer. Mass spectrometry is an analytical method of critical importance in all studies related to stilbenes that are important in the biomedical field. From the discovery of new natural compounds and mapping the grape metabolome up to advanced investigations of stilbenes' potential for the protection of human health in clinical studies, mass spectrometry has provided critical analytical information. In this review we focus on various approaches related to mass spectrometry for the detection of stilbenes-such as coupling with chromatographic separation methods and direct infusion-with presentation of some illustrative applications. Clearly, the potential of mass spectrometry for assisting in the discovery of new stilbenes of biomedical importance, elucidating their mechanisms of action, and quantifying minute quantities in complex matrices is far from being exhausted.

Development of a label-free aptasensor for monitoring the self-association of lysozyme.

A novel aptamer and surface plasmon resonance (SPR)-based sensor was developed for the label-free detection of lysozyme. The aptasensor is characterised by a detection limit of 1 µg mL(-1) and a linear range of 5-50 µg mL(-1). As an application, we examined the usefulness of the aptasensor for monitoring the early stages of the aggregation of lysozyme. It was surprisingly found that, despite a significant decrease in monomer content during aggregation, the response of the aptasensor for protein solutions aged for 12 hours was similar to that for the fresh protein. To correlate the results obtained with the aptasensor with the composition of lysozyme solutions at various time points, we examined them in detail by atomic force microscopy (AFM), thioflavin T fluorescence, size-exclusion chromatography (SEC) and Matrix Assisted Laser Desorption Ionisation Time of Flight Mass Spectrometry (MALDI-TOF-MS). All methods together indicated that during the initial hours of aggregation, the protein solutions contained small lysozyme oligomers (mainly dimers) and decreasing amounts of monomers. Our results thus suggest that the aptamer also recognizes lysozyme dimers/oligomers. A higher non-specific binding was observed for the aggregated lysozyme at the surface of the aptasensor as compared to the native protein. This was attributed to the hydrophobic patches which are exposed by the unfolded lysozyme and/or oligomer species, allowing for different adsorption and organisation at the surface of the aptasensor. This hypothesis is supported by square wave voltammetry (SWV) studies using solutions of aggregated lysozyme. A higher electrochemical signal due to the direct oxidation of tyrosine/tryptophan residues was observed for aged protein solutions as compared to the fresh solution, indicative of an increased number of such exposed electroactive residues and of overall increased surface hydrophobicity of the protein. Our work presents a label-free lysozyme aptasensor that is useful not only for the detection of the protein monomer but also for observing the onset of aggregation. The approach can be extended to other proteins which are prone to aggregation.