ABSTRACT
Modulating the properties of biomaterials in terms of the host immune response is critical for tissue repair and regeneration. However, it is unclear how the preference for the cellular microenvironment manipulates the chiral immune responses under physiological or pathological conditions. Here, we reported that in vivo and in vitro oligopeptide immunosuppressive modulation was achieved by manipulation of macrophage polarization using chiral tetrapeptide (Ac-FFFK-OH, marked as FFFK) supramolecular polymers. The results suggested that chiral FFFK nanofibers can serve as a defense mechanism in the restoration of tissue homeostasis by upregulating macrophage M2 polarization via the Src-STAT6 axis. More importantly, transiently acting STAT6, insufficient to induce a sustained polarization program, then passes the baton to EGR2, thereby continuously maintaining the M2 polarization program. It is worth noting that the L-chirality exhibits a more potent effect in inducing macrophage M2 polarization than does the D-chirality, leading to enhanced tissue reconstruction. These findings elucidate the crucial molecular signals that mediate chirality-dependent supramolecular immunosuppression in damaged tissues while also providing an effective chiral supramolecular strategy for regulating macrophage M2 polarization and promoting tissue injury repair based on the self-assembling chiral peptide design.
Subject(s)
Biocompatible Materials , Macrophages , Macrophages/metabolism , Biocompatible Materials/pharmacology , Peptides , Stereoisomerism , STAT6 Transcription Factor/metabolism , Immunosuppressive Agents/pharmacologyABSTRACT
Bacterial infection in skin and soft tissue has emerged as a critical concern. Overreliance on antibiotic therapy has led to numerous challenges, including the emergence of multidrug-resistant bacteria and adverse drug reactions. It is imperative to develop non-antibiotic treatment strategies that not only exhibit potent antibacterial properties but also promote rapid wound healing and demonstrate biocompatibility. Herein, a novel multimodal synergistic antibacterial system (SNO-CS@MoS2) was developed. This system employs easily surface-modified thin-layer MoS2 as photothermal agents and loaded with S-nitrosothiol-modified chitosan (SNO-CS) via electrostatic interactions, thus realizing the combination of NO gas therapy and photothermal therapy (PTT). Furthermore, this surface modification renders SNO-CS@MoS2 highly stable and capable of binding with bacteria. Through PTT's thermal energy, SNO-CS@MoS2 rapidly generates massive NO, collaborating with PTT to achieve antibacterial effects. This synergistic therapy can swiftly disrupt the bacterial membrane, causing protein leakage and ATP synthesis function damage, ultimately eliminating bacteria. Notably, after effectively eliminating all bacteria, the residual SNO-CS@MoS2 can create trace NO to promote fibroblast migration, proliferation, and vascular regeneration, thereby accelerating wound healing. This study concluded that SNO-CS@MoS2, a novel multifunctional nanomaterial with outstanding antibacterial characteristics and potential to promote wound healing, has promising applications in infected soft tissue wound treatment.
Subject(s)
Nanostructures , Nitric Oxide , Molybdenum/pharmacology , Molybdenum/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Nanostructures/chemistry , RegenerationABSTRACT
BACKGROUND: Currently, oblique placement of long implants or the use of short implants to circumvent the maxillary sinus area and provide support for fixed prostheses are viable alternatives. The purpose of this study was to compare these two treatment concepts and ascertain which one exhibits superior biomechanical characteristics. METHODS: Two different treatment concept models were constructed. The first one, LT4I, consisting of two mesial vertical implants positioned in lateral incisor regions and two distal tilted implants (45°) situated in second premolar regions of the maxilla. The second model, VS4I, includes two mesial vertical implants in lateral incisor regions and two vertically positioned short implants in second premolar regions. Numerical simulations were conducted under three loading types: firstly, oblique forces upon the molars; secondly, vertical forces upon the molars; thirdly, oblique forces upon the incisors. The maximum principal stress (σmax) and minimum principal stress (σmin) of the bone, as well as von Mises stress of the implants, were calcuated. RESULTS: Under oblique loading on the molar, higher stress values in the bone were observed in LT4I group. Under vertical loading on molar, higher stress values in the bone were also observed in LT4I group. Furthermore, little difference was found between the two groups under oblique loading on the incisor. CONCLUSION: Both treatment concepts can be applicable for edentulous individuals with moderate atrophic maxilla. Compared to tilted implants, short implants can transmit less occlusal force to the supporting tissues.
Subject(s)
Dental Implants , Humans , Dental Prosthesis, Implant-Supported , Finite Element Analysis , Maxilla/surgery , Models, Theoretical , Stress, Mechanical , Dental Stress Analysis , Dental Prosthesis DesignABSTRACT
Background: Much attention has been paid to sustained drug release and anti-infection in wound management. Hydrogels, which are biocompatible materials, are promising tools for controlled drug release and infective protection during wound healing. However, hydrogels also demonstrate limitations in the highly efficient treatment of wounds because of the diffusion rate. In this work, we explored pH-sensitive hydrogels that enable ultra-long-acting drug release and sustained antibacterial properties. Methods: We constructed a hybrid gelatin methacrylate (GelMA) system with sustainable antibacterial properties combining hyaluronic acid (HA)-coated mesoporous silica nanoparticles (MSN), which loaded host-guest complexes of chlorhexidine (CHX) with ß-cyclodextrins (ß-CD) (CHXâCD-MSN@HA@GelMA). The release mechanism of CHX was explored using UV-vis spectra after intermittent diffusion of CHX. The hybrid hydrogels were characterized, and the drug content in terms of the release profile, bacterial inhibition, and in vivo experiments were investigated. Results: Except for dual protection from both hydrogels, MSN in the HA improved the drug loading efficiency to promote the local drug concentration. It showed that complicated CHX-loaded MSN releases CHX more gradually and over a longer duration than CHX-loaded MSNs. This demonstrated a 12-day CHX release time and antibacterial activity, primarily attributable to the capacity of ß-CD to form an inclusion complex with CHX. Meanwhile, in vivo experiments revealed that the hydrogels safely promote skin wound healing and enhance therapeutic efficacy. Conclusion: We constructed pH-sensitive CHXâCD-MSN@HA@GelMA hydrogels that enable ultra-long-acting drug release and sustained antibacterial properties. The combination of ß-CD and MSN would be better suited to release a reduced rate of active molecules over time (slow delivery), making them great candidates for wound dressing anti-infection materials.
Subject(s)
Nanoparticles , beta-Cyclodextrins , Hydrogels/pharmacology , Silicon Dioxide , Anti-Bacterial Agents/pharmacology , Bandages , Chlorhexidine/pharmacology , Hyaluronic Acid , MethacrylatesABSTRACT
Extrusible biomaterials have recently attracted increasing attention due to the desirable injectability and printability to allow minimally invasive administration and precise construction of tissue mimics. Specifically, self-healing colloidal gels are a novel class of candidate materials as injectables or printable inks considering their fascinating viscoelastic behavior and high degree of freedom on tailoring their compositional and mechanical properties. Herein, we developed a novel class of adaptable and osteogenic composite colloidal gels via electrostatic assembly of gelatin nanoparticles and nanoclay particles. These composite gels exhibited excellent injectability and printability, and remarkable mechanical properties reflected by the maximal elastic modulus reaching â¼150 kPa combined with high self-healing efficiency, outperforming most previously reported self-healing hydrogels. Moreover, the cytocompatibility and the osteogenic capacity of the colloidal gels were demonstrated by inductive culture of MC3T3 cells seeded on the three-dimensional (3D)-printed colloidal scaffolds. Besides, the biocompatibility and biodegradability of the colloidal gels was provedin vivoby subcutaneous implantation of the 3D-printed scaffolds. Furthermore, we investigated the therapeutic capacity of the colloidal gels, either in form of injectable gels or 3D-printed bone substitutes, using rat sinus bone augmentation model or critical-sized cranial defect model. The results confirmed that the composite gels were able to adapt to the local complexity including irregular or customized defect shapes and continuous on-site mechanical stimuli, but also to realize osteointegrity with the surrounding bone tissues and eventually be replaced by newly formed bones.
Subject(s)
Gelatin , Osteogenesis , Rats , Animals , Clay , Bone Regeneration , Hydrogels/pharmacology , Tissue Engineering , Tissue Scaffolds , Printing, Three-DimensionalABSTRACT
To effectively treat diabetic wounds, the development of versatile medical dressings that can long-term regulate blood glucose and highly effective anti-oxidative stress, antibacterial and anti-inflammatory are critical. Here, an all-in-one CO gas-therapy-based versatile hydrogel dressing (ICOQF) was developed via the dynamic Schiff base reaction between the amino groups on quaternized chitosan (QCS) and the aldehyde groups on benzaldehyde-terminated F108 (F108-CHO) micelles. CORM-401 (an oxidant-sensitive CO-releasing molecules) was encapsulated in the hydrophobic core of F108-CHO micelles and insulin was loaded in the three-dimensional network structure of ICOQF. The dynamic Schiff base bonds not only endowed ICOQF with good tissue adhesion, injectability and self-healing, but also gave it sustained and controllable insulin release ability. In addition, ICOQF could quickly generate CO in inflamed wound tissue by consuming reactive oxygen species. The generated CO could effectively anti-oxidative stress by activating the expression of heme oxygenase; antibacterial by inducing the rupture of bacterial cell membranes and mitochondrial dysfunction and inhibiting the synthesis of adenosine triphosphate; and anti-inflammatory by inhibiting the proliferation of activated macrophages and promoting the polarization of the M1 phenotype to the M2 phenotype. Due to these outstanding properties, ICOQF significantly promoted the healing of STZ-induced MRSA-infected diabetic wounds accompanied by good biocompatibility. This study clearly shows that ICOQF is a versatile hydrogel dressing with great application potential for the management of diabetic wounds. STATEMENT OF SIGNIFICANCE: The development of some versatile hydrogel dressings that can not only provide a prolonged and controlled insulin release property but also utilize a non-antibiotic treatment modality for highly effective antibacterial, anti-inflammatory, and anti-oxidative stress effects is vital for the successful treatment of diabetic wounds. Herein, we developed an all-in-one CO gas-therapy-based versatile hydrogel dressing (ICOQF) with sustained and controllable insulin release abilities. Moreover, ICOQF could not only quickly release CO in the inflamed wound tissue by consumption of reactive oxygen species but also utilize the generated CO to highly effectively anti-oxidative stress, antibacterial, and anti-inflammatory. ICOQF therapy substantially promoted the healing of STZ-induced MRSA-infected diabetic wounds. Overall, this work provides a multifunctional hydrogel dressing for the management of diabetic wounds.
Subject(s)
Diabetes Mellitus , Wound Infection , Anti-Bacterial Agents/chemistry , Anti-Inflammatory Agents , Bandages , Humans , Hydrogels/chemistry , Hydrogels/pharmacology , Insulin/pharmacology , Micelles , Oxidative Stress , Reactive Oxygen Species , Schiff Bases/chemistryABSTRACT
Development of versatile medical dressing with good immediate and long-lasting antibacterial, hygroscopic and moisturizing abilities is of great significance for management of chronic wounds. Cotton gauze (CG) can protect wounds and promote scabbing, but can cause wound dehydration and loss of biologically active substances, thereby greatly delays wound healing. Herein, a bi-functional CG dressing (CPCG) was developed by chemically grafting polyhexamethylene guanidine (PHMG) and physically adsorbing chitosan (CS) onto the CG surface. Due to the powerful microbicidal activity of PHMG, CPCG exhibited excellent immediate and long-lasting antibacterial activity against gram-positive and gram-negative bacteria. Moreover, the abundant hydroxyl and amino groups in CS endowed CPCG with good biocompatibility, moisture absorption, moisturizing and cell scratch healing performances. Importantly, CPCG can be easily fabricated into a bandage to conveniently manage infected full-skin wounds. Together, this study suggests that CPCG is a versatile wound dressing, having enormous application potential for management chronic wounds.
Subject(s)
Anti-Bacterial Agents , Bandages , Chitosan , Cotton Fiber , Guanidines , Animals , Cell Movement , Cells, Cultured , Erythrocytes , Escherichia coli/growth & development , Female , Hemolysis , Humans , Mice, Inbred BALB C , Staphylococcus aureus/growth & development , Wound Healing , Wound Infection/prevention & controlABSTRACT
OBJECTIVE: To develop an in vivo model to simulate the complex internal environment of diabetic peri-implantitis (T2DM-PI) model for a better understanding of peri-implantitis in type 2 diabetic patients. MATERIALS AND METHODS: Maxillary first molars were extracted in Sprague-Dawley (SD) rats, and customized cone-shaped titanium implants were installed in the extraction sites. Thereafter, implants were uncovered and customized abutments were screwed into implants. A high-fat diet and a low-dose injection of streptozotocin were utilized to induce T2DM. Finally, LPS was locally injected in implant sulcus to induce peri-implantitis. RESULTS: In the present study, T2DM-PI model has been successfully established. Imaging analysis revealed that abundant inflammatory cells infiltrated in the soft tissue in T2DM-PI group with concomitant excessive secretion of inflammatory cytokines. Moreover, higher expression of MMP and increased number of osteoclasts led to collagen disintegration and bone resorption in T2DM-PI group. CONCLUSIONS: These results describe a novel rat model which stimulate T2DM-PI in vivo, characterized by overwhelming inflammatory response and bone resorption. This model has a potential to be used for investigation of initiation, progression and interventional therapy of T2DM-PI.
Subject(s)
Bone Resorption , Dental Implants , Diabetes Mellitus, Type 2 , Peri-Implantitis , Animals , Cytokines/metabolism , Diabetes Mellitus, Type 2/complications , Peri-Implantitis/etiology , Rats , Rats, Sprague-DawleyABSTRACT
Ridge preservation is universally acknowledged as the conventional method for the post-extraction healing yet there are no standard materials for the ideal healing outcome. Herein, a composite gel comprising gelatin nanoparticles (GNPs) and injectable platelet-rich-fibrin (i-PRF) as the potential candidate for extracted socket healing is introduced. The combination of GNPs and i-PRF not only possesses favorable mechanical properties to withstand external force but also accelerate the blood clotting time significantly. In addition, six beagle dogs were adopted to assess the angiogenic and osteogenic capacity of GNPs+i-PRF gel in vivo. The GNPs+i-PRF gel significantly produced the most blood vessels area, woven bone and low osteoclast activity in extracted sockets at 2 weeks postoperation and remarkably generated corticalization on the alveolar ridge crest at 8 weeks postoperation according to histological results. Therefore, GNPs+i-PRF gel can be recommended as the candidate grafting material regarding ridge preservation for its cost effectiveness, excellent biocompatibility, facilitation of blood clotting and favorable capacity of promoting angiogenesis and osteogenesis.
ABSTRACT
BACKGROUND: Schneiderian membrane (SM) perforation is a major complication of maxillary sinus elevation with simultaneous bone grafting, yet under this scenario there is no standard biomaterial that maximizes favorable tissue healing and osteogenic effects. PURPOSE: To compare the effect of advanced platelet-rich fibrin (A-PRF) and collagen membrane (CM) on a perforated SM with simultaneous bone grafting in a maxillary sinus elevation model. MATERIALS AND METHODS: After perforation of the SM was established, 24 animals were randomly divided into two groups: (i) group CM: CM and deproteinized bovine bone mineral (DBBM) (n = 12), (ii) group A-PRF: A-PRF and DBBM (n = 12). Radiographic and histological evaluations were performed at 1 and 4 weeks post-operation. RESULTS: At 1 week, an intact SM was found in group A-PRF. At each time point, the number of inflammatory cells at the perforated site was higher in group CM, and the area of new osteoid formation was significantly greater in group A-PRF (p < 0.0001). At 4 weeks, the osteogenic pattern was shown as from the periphery to the center of the sinus cavity in group A-PRF. CONCLUSION: The higher elasticity, matching degradability, and plentiful growth factors of A-PRF resulted in a fully repaired SM, which later ensured the two osteogenic sources from the SM to generate significant new bone formation. Thus, A-PRF can be considered to be a useful bioactive tissue-healing biomaterial for SM perforation with simultaneous bone grafting.
ABSTRACT
OBJECTIVES: This study aims to assess the angiogenic and osteogenic capacity in rabbit sinus model grafted with Deproteinized bovine bone mineral (DBBM) particles soaked in injectable Platelet rich fibrin (iPRF), both of which interacted to form an integrated block. MATERIALS AND METHODS: Among sixteen rabbits, bilateral maxillary sinuses were randomly grafted with either DBBM containing iPRF (iPRF+DBBM group), or DBBM alone (DBBM group). After a 4 and 8-week healing period, animals were sacrificed for micro-CT, histological and immunofluorescence analyses, respectively. RESULTS: New bone formation in the iPRF+DBBM group was largely observed around the basal bone wall and Schneiderian membrane (SM), which further substitute the bone grafting material in a bidirectional remodeling pattern. Although the ultimate amount of bone volume was of no significant difference between two groups in radiographical image, the expression of ALP and TRAP staining were significantly higher in the experimental group with numerous vascular formations at 4th week. Moreover, the substitution rate of DBBM by new bone formation after 8 weeks was significantly higher in the experimental group. As a result, mature collagen fibers were detected in the larger amount of area in iPRF+DBBM group even at an early stage. CONCLUSION: iPRF+DBBM accelerated vascular formation, bone remodeling and substitution of bone graft materials at the early healing period, even though it failed to increase the bone volume in a long-term period. This integrated grafting biomaterial will have great potential in the application of sinus augmentation, which provides a favorable environment for early implant placement.
ABSTRACT
BACKGROUND: Limited studies focused on the bone profile maintenance at the alveolar ridge crest applying horizontal bone augmentation. PURPOSE: A novel approach named as "in-situ bone ring technique" was introduced to be compared with tent-pole technique to evaluate their horizontal bone gain, resorption, and postoperative perception. MATERIALS AND METHODS: A total of 30 patients were included in this retrospective cohort study. All patients required horizontal bone augmentation at anterior site. Accordingly, quantitative and qualitative analyses were conduct radiographically and histologically between in-situ bone ring (ring group) and tent-pole technique (tent group). Moreover, the visual analog scale (VAS) was introduced to assess the patients' perception toward both treatments. RESULTS: Cone-beam computed tomography results showed great significant difference regarding horizontal bone width at 0 mm and 3 mm from alveolar ridge crest between two groups (P < .05). On the basis of histological outcomes, delightful bony fusion was shown 6-month postoperatively in ring group. The VAS ratings for pain and swelling reflected similar results between two groups. CONCLUSIONS: In-situ bone ring technique evidently increased and maintained horizontal bone mass at the alveolar ridge crest compared to tent-pole technique, which might be favorable for implant rehabilitation in anterior area. Meanwhile, no further discomfort was caused according to VAS scoring between two groups.
Subject(s)
Alveolar Ridge Augmentation , Maxilla , Alveolar Process , Bone Transplantation , Cone-Beam Computed Tomography , Dental Implantation, Endosseous , Humans , Retrospective StudiesABSTRACT
Bone healing is a dynamic process regulated by biochemical signals such as chemokines and growth factors, and biophysical signals such as topographical and mechanical features of extracellular matrix or mechanical stimuli. Hereby, a mechanically tough and bioactive hydrogel based on autologous injectable platelet-rich fibrin (iPRF) modified with gelatin nanoparticles (GNPs) is developed. This composite hydrogel demonstrates a double network (DN) mechanism, wherein covalent network of fibrin serves to maintain material integrity, and self-assembled colloidal network of GNPs dissipates force upon loading. A rabbit sinus augmentation model is used to investigate the bioactivity and osteogenesis capacity of the DN hydrogels. The DN hydrogels adapt to the local environmental complexity of bone defects, i.e., accommodate the irregular shape of the defects and withstand the pressure formed in the maxillary sinus during animal's respiration process. The DN hydrogel is also demonstrated to absorb and prolong the release of the bioactive growth factors stemming from iPRF, which could have contributed to the early angiogenesis and osteogenesis observed inside the sinus. This adaptable and bioactive DN hydrogel can achieve enhanced bone regeneration in treating complex bone defects by maintaining long-term bone mass and withstanding the functional mechanical stimuli.
Subject(s)
Nanoparticles , Platelet-Rich Fibrin , Animals , Gelatin , Hydrogels/pharmacology , Osteogenesis , RabbitsABSTRACT
BACKGROUND: Full ceramic or metal custom-made root analogue implants (RAIs) are made by replicating the natural tooth geometry. However, it may lead to the stress shielding of the surrounding bone, and an RAI is unable to easily achieve primary stability. Therefore, to improve primary stability and reduce stress shielding, RAI porous structures are proposed. The purpose of this study was to evaluate the effect of porous microstructures on the biomechanical characteristics of the custom-made RAI. METHODS: Porous and bulk titanium cylinders and porous RAI and conventional implants for in vivo tests were fabricated using a selective laser melting (SLM) technology. The elastic modulus and the compressive strength of porous titanium cylinders were evaluated. These samples were then implanted into rabbit femurs (cylinders) and beagle dog mandibles (RAI and conventional implants). A simplified three-dimensional geometry of the anterior maxilla of a patient was constructed. Then, based on the extracted standard template library (STL) data, five different RAI models were constructed: (A) smooth surface, (B) pit surface, (C) bulb surface, (D) threaded surface, and (E) porous surface. A conventional implant model was also constructed. A static load of 100 N was applied to the crown in the multivectoral direction. RESULTS: The results of the in vivo experiment confirmed that the porous structure decreased the elastic modulus of Ti6Al4V. Additionally, the implantation of the porous custom-made RAIs resulted in increased new bone ingrowth and decreased bone resorption compared to conventional implants. Moreover, the 3D finite element analysis suggested that the bone surrounding porous custom-made RAIs was subjected to a more uniform stress distribution, and the strain values of the surrounding bone were more conducive to bone formation. CONCLUSION: Based on these findings, a custom-made RAI with a porous surface accelerates bone formation and might reduce the stress-shielding effect.
Subject(s)
Prostheses and Implants , Animals , Compressive Strength , Dogs , Elastic Modulus , Finite Element Analysis , Humans , Porosity , RabbitsABSTRACT
The purpose of this study was to compare the effects of implant inclinations and load times on stress distributions in the peri-implant bone based on immediate- and delayed-loading models. Four 3D FEA models with different inclination angle of the posterior implants (0°, 15°, 30°, 45°) were constructed. A static load of 150 N in the multivectoral direction was applied unilaterally to the cantilever region. The stress distributions in the peri-implant bone were evaluated before and after osseointegration. The principal tensile stress (σmax), mean principal tensile stress (σmax), principal compressive stress (σmin) and mean principal compressive stress (σmin) of the bone and micromotion at the contact interface between the bone and implants were calculated. In all the models, peak principal stresses occurred in the bone surrounding the left tilted implant. The highest σmax and σmin were all observed in the 0° model for both immediate- and delayed-loading models. And the 0° and 15° models showed higher σmax and σmin values. The 0°models showed the largest micromotion. The observed stress distribution was better in the 30° and 45° models than in the 0° and 15° models.
Subject(s)
Dental Implants , Finite Element Analysis , Imaging, Three-Dimensional , Biomechanical Phenomena , Cancellous Bone/physiology , Cortical Bone/physiology , Dental Stress Analysis , Elastic Modulus , Humans , Osseointegration , Stress, Mechanical , Time Factors , Weight-BearingABSTRACT
Osteoporosis is a wide-range disease with a negative impact on bone defect healing. Strontium ranelate (SR) has promising osteogenic potential for its dual function on stimulating osteoblasts and inhibiting osteoclast activity. However, it has limitations for its dose-dependent effect and side effects on systemic applications. Here, a sequentially cross-linking strategy including enzyme-cross-linking through tyrosinase from mushroom and physical folding is acquired to create SR loaded gelatin nanoparticle/silk fibroin aerogel (abbreviated as S/G-Sr-MT) with drug release controlling capacity. The results showed successful enzyme-cross-linking, excellent spatial structure, and enhanced mechanical properties of S/G-Sr-MT. Even Sr2+ loading and stable release with markedly inhibited initial burst release were detected. The biomineralization investigation showed rapid deposition of hydroxyapatite on the surface of S/G-Sr-MT. In vitro, spreading morphology and higher osteogenic gene expression of MC3T3-E1 seeded on S/G-Sr-MT were observed compared to other groups after 7 day culturing. In vivo, S/G-Sr-MT showed an obvious osteogenic capacity in calvaria defects of ovariectomized rats in which high Runx2 expression and inhibited TRAP activity were observed. Such results suggested the S/G-Sr-MT scaffold could stimulate osteogenic differentiation of osteoblasts while inhibiting osteoclast behaviors in vivo. These findings highlight the potential osteogenic ability and clinical application of SR incorporated enzyme-cross-linked scaffold in ovariectomized (OVX) bone healing.
ABSTRACT
Guanylate Binding Proteins (GBPs) are a group of cytokine-inducible large guanosine triphosphatase. Previous studies have shown high expression of GBP1 in circulating monocytes of premenopausal subjects was correlated to extremely low peak bone mass, which is considered as an important determinant of osteoporosis. However, whether GBPs play a role in regulation of osteogenesis of mesenchymal stromal cells (MSCs) remains largely unknown. In the present study, we found that mRNA expression of GBP1 was highest among all the GBPs, and it was dramatically downregulated during osteogenic differentiation of human MSCs derived from bone marrow (hBM-MSCs). While siRNA-mediated knockdown of GBP1 promoted osteogenesis, overexpression of GBP1 suppressed osteogenesis of hBM-MSCs. Furthermore, we found GBP1 is required for expression of indoleamine 2,3 dioxygenase (IDO), Interleukin 6 (IL-6) and IL-8 induced by treatment with Interferon-γ (IFN-γ). Depletion of GBP1 rescued the inhibited osteogenesis induced by IFN-γ treatment, at least in part. Collectively, our findings indicate GBP1 inhibits osteogenic differentiation of MSCs, and inhibition of GBP1 expression may prevent development of osteoporosis and facilitate MSC-based bone regeneration.