Unraveling the interaction of co-encapsulated Saccharomyces cerevisiae and Metarhizium brunneum in calcium alginate-based attract-and-kill beads.

BACKGROUND: Attract-and-kill (AK) beads are biological, microbial insecticides developed as an alternative to synthetic soil insecticides. For wireworm control, beads are based on calcium alginate/starch co-encapsulating the carbon dioxide (CO2) producing yeast Saccharomyces cerevisiae H205 as the attract component, and the entomopathogenic fungus Metarhizium brunneum CB15-III as the kill component. However, the physicochemical processes inside beads during co-cultivation are still unclear. Here we reveal for the first time the spatiotemporal conditions of oxygen and pH inside AK beads measured with microelectrodes and describe the impact of S. cerevisiae on CO2 and conidia formation. RESULTS: Measurements revealed a steep oxygen gradient already 2 days after co-encapsulation, with an internal hypoxic zone. Encapsulating either S. cerevisiae or M. brunneum already decreased the average pH from 5.5 to 4.7 and 4.6, respectively. However, on day 3, co-cultivation lead to temporal strong acidification of beads down to pH 3.6 which followed the maximum CO2 productivity and coincided with the maximum conidiation rate. Decreasing the yeast load decreased the total CO2 productivity to half, and the conidial production by 93%, while specific productivities normalized to 1% yeast load increased eight-fold and three-fold, respectively, with day 3 being an exception. CONCLUSION: Our findings indicate a general beneficial interaction between M. brunneum and S. cerevisiae, but also suggest competition for resources. These findings will contribute to develop innovative co-formulations with maximum efficiency to save application rates and costs. © 2024 The Author(s). Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Release Kinetics of Potassium, Calcium, and Iron Cations from Carboxymethyl Cellulose Hydrogels at Different pH Values.

In an in-depth study of the mechanism of cation release from carboxymethyl cellulose hydrogels synthesized through Schiff base reaction, we analyze the differences in the release kinetics of potassium, calcium, and iron cations with Peleg model at pH values of pH 3.5 and pH 8.5 using ICP-OES (inductively coupled plasma optical emission spectroscopy) technique.

Polyvinyl alcohol coating releasing fungal blastospores improves kill effect of attract-and-kill beads.

Polyvinyl alcohol (PVA) is a biodegradable, water-soluble polymer with excellent film forming properties, commonly studied or used as tablet coating, food packaging or controlled release fertilizers. Attract-and-kill (AK) beads are sustainable, microbial alternatives to synthetic soil insecticides, whose onset of lethal effect largely depend on how fast the encapsulated entomopathogenic fungus forms virulent conidia. Therefore, the objective of this study was to develop a water-soluble coating accelerating the kill effect of AK beads by immediately releasing virulent Metarhizium brunneum CB15-III blastospores. We assessed three PVA types (PVA 4-88, 8-88, 10-98) which differed in their degree of hydrolysis or molecular weight for their ability to release viable blastospores from thin films after drying at 60-40 °C, and examined how polyethylene glycol and soy-lecithin impact the blastospore survival. Finally, we evaluated the effectiveness of coated AK beads in a bioassay against Tenebrio molitor larvae. The blastospore release rate quadrupled within the first 5 min with decreasing molecular weight and degree of hydrolysis, with PVA 4-88 releasing 79 ± 19% blastospores. Polyethylene glycol and soy-lecithin significantly increased the blastospore survival to 18-28% for all three PVA types. Coated beads exhibited a uniform, 22.4 ± 7.3 µm thin coating layer, with embedded blastospores, as confirmed by scanning electron microscopy. The blastospore coating increased the mortality rate of T. molitor larvae over uncoated AK beads, decreasing the median lethal time from 10 to 6 days. Consequently, the blastospore coating accelerated the kill effect of regular AK beads. These findings pave the way to enhanced pest control efficacy from coated systems such as beads or seeds.

Pandora cacopsyllae Eilenberg, Keller & Humber (Entomophthorales: Entomophthoraceae), a new species infecting pear psyllid Cacopsylla pyri L. (Hemiptera: Psyllidae).

The new species Pandora cacopsyllae Eilenberg, Keller & Humber (Entomophthorales) is described. The fungus was found on infected pear psyllids Cacopsylla pyri (Hemiptera: Psyllidae) in a pear orchard in Zealand, Denmark. Morphological structures (conidia, rhizoids, cystidia) were described on the designated type host C. pyri. In addition, conidia from an in vitro culture were described. Pandora cacopsyllae differs from other Pandora species by a) C. pyri is the natural host; b) conidia are different from other Pandora species infecting Psylloidea; c) ITS differs from other Pandora species infecting Hemiptera. The fungus has a high potential for future use in biological control of Cacopsylla pest species as well as other psyllids.

Silica Hydrogels as Entrapment Material for Microalgae.

Despite being a promising feedstock for food, feed, chemicals, and biofuels, microalgal production processes are still uneconomical due to slow growth rates, costly media, problematic downstreaming processes, and rather low cell densities. Immobilization via entrapment constitutes a promising tool to overcome these drawbacks of microalgal production and enables continuous processes with protection against shear forces and contaminations. In contrast to biopolymer gels, inorganic silica hydrogels are highly transparent and chemically, mechanically, thermally, and biologically stable. Since the first report on entrapment of living cells in silica hydrogels in 1989, efforts were made to increase the biocompatibility by omitting organic solvents during hydrolysis, removing toxic by-products, and replacing detrimental mineral acids or bases for pH adjustment. Furthermore, methods were developed to decrease the stiffness in order to enable proliferation of entrapped cells. This review aims to provide an overview of studied entrapment methods in silica hydrogels, specifically for rather sensitive microalgae.

Encapsulation of the psyllid-pathogenic fungus Pandora sp. nov. inedit. and experimental infection of target insects.

BACKGROUND: Pandora sp. nov. inedit. (Entomophthorales: Entomophthoraceae) (ARSEF 13372) is a recently isolated entomophthoralean fungus with potential for psyllid pest control. This study aimed to develop a formulation based on biocompatible hydrogel beads in order to transfer the fungus into an easily applicable form and to test the effects on psyllids. RESULTS: After encapsulation in calcium alginate beads, Pandora sp. nov. grew from the beads and discharged conidia over 12 days under optimal humidity conditions at 18 °C. Conidial number was increased 2.95-fold by the addition of skimmed milk as nutritional formulation adjuvant to the beads. The virulence of the encapsulated fungus was assessed with the two target psyllid species; the summer apple psyllid, Cacopsylla picta and the pear psyllid, Cacopsylla pyri. Beads containing skimmed milk as nutritional adjuvant led to the highest mortalities (48.3% on C. picta and 75.0% on C. pyri). In a second bioassay, survival time of C. pyri exposed to beads containing different concentration (10%, 20% or 40%) of Pandora sp. nov. was tested. The survival time of C. pyri was significantly reduced when exposed to beads containing 10% or 20% Pandora sp. nov. The median survival time was reached after 5-6 days past inoculation and the cumulative mortality for C. pyri treated with Pandora sp. nov. beads showed up to 89% mortality. CONCLUSION: The promising results of this study will ease the way for large-scale field application of a novel Pandora species in biological psyllid pest control.

Formalin-casein enhances water absorbency of calcium alginate beads and activity of encapsulated Metarhizium brunneum and Saccharomyces cerevisiae.

The control of root-feeding wireworms has become more challenging as synthetic soil insecticides have been progressively phased out due to environmental risk concerns. Innovative microbial control alternatives such as the so-called attract-and-kill strategy depend on the rapid and successful development of dried encapsulated microorganisms, which is initiated by rehydration. Casein is a functional additive that is already used in food or pharmaceutical industry due to its water binding capacity. Cross-linked forms such as formalin-casein (FC), exhibit altered network structures. To determine whether FC influences the rehydration of alginate beads in order to increase the efficacy of an attract-and-kill formulation for wireworm pest control, we incorporated either casein or FC in different alginate/starch formulations. We investigated the porous properties of alginate/starch beads and subsequently evaluated the activities of the encapsulated entomopathogenic fungus Metarhizium brunneum and the CO2 producing yeast Saccharomyces cerevisiae. Adding caseins altered the porous structure of beads. FC decreased the bead density from (1.0197 ± 0.0008) g/mL to (1.0144 ± 0.0008) g/mL and the pore diameter by 31%. In contrast to casein, FC enhanced the water absorbency of alginate/starch beads by 40%. Furthermore, incorporating FC quadrupled the spore density on beads containing M. brunneum and S. cerevisiae, and simultaneous venting increased the spore density even by a factor of 18. Moreover, FC increased the total CO2 produced by M. brunneum and S. cerevisiae by 29%. Thus, our findings suggest that rehydration is enhanced by larger capillaries, resulting in an increased water absorption capacity. Our data further suggest that gas exchange is improved by FC. Therefore, our results indicate that FC enhances the fungal activity of both fungi M. brunneum and S. cerevisiae, presumably leading to an enhanced attract-and-kill efficacy for pest control.

Image analysis-based quantification of fungal sporulation by automatic conidia counting and gray value correlation.

The present work describes a new computer-assisted image analysis method for the rapid, simple, objective and reproducible quantification of actively discharged fungal spores which can serve as a manual for laboratories working in this context. The method can be used with conventional laboratory equipment by using bright field microscopes, standard scanners and the open-source software ImageJ. Compared to other conidia quantification methods by computer-assisted image analysis, the presented method bears a higher potential to be applied for large-scale sample quantities. The key to make quantification faster is the calculation of the linear relationship between the gray value and the automatically counted number of conidia that has only to be performed once in the beginning of analysis. Afterwards, the gray value is used as single parameter for quantification. The fast, easy and objective determination of sporulation capacity enables facilitated quality control of fungal formulations designed for biological pest control.•Rapid, simple, objective and reproducible quantification of fungal sporulation suitable for large-scale sample quantities.•Requires conventional laboratory equipment and open-source software without technical or computational expertise.•The number of automatically counted conidia can be correlated with the gray value and after initial calculation of a linear fit, the gray value can be applied as single quantification parameter.

Chitin increases drying survival of encapsulated Metarhizium pemphigi blastospores for Ixodes ricinus control.

Ticks, like Ixodes ricinus, have negative impacts on human and animal health in Germany and worldwide, with almost no specific scientifically proven biological control agent commercially available. Biological control agents containing entomopathogenic fungi present many advantages over chemical acaricides but usually high doses of aerial conidia (1013-1014 conidia/ha) are required to control arthropod pests in the field. A suitable formulation containing nutrients not only makes sensitive blastospores applicable but also functions as a microfermenter to multiply the biomass and thus significantly reduce the required application dosage. For this approach, Metarhizium pemphigi X1c blastospores were encapsulated in calcium alginate beads with granular corn starch or chitin powder as nutrients to ensure formation of aerial conidia on the surface and were then dried. The highest concentration was obtained with moist beads containing chitin (4.68 ±â€¯0.71∙107 conidia∙bead-1). The highest drying survival was also obtained with chitin as the additive (14.7 ±â€¯2.18%). Newly formed aerial conidia of all formulations showed high virulence and caused 100% mortality of I. ricinus nymphs. Altogether, this study paves the way for a lower dose and cost-effective application of blastospores for the control of above ground arthropod pests.

Formulating bacterial endophyte: Pre-conditioning of cells and the encapsulation in amidated pectin beads.

Despite the benefits of bacterial endophytes, recent studies on the mostly Gram-negative bacteria lack of regard for formulation strategies. The encapsulation into biopolymeric materials such as amidated pectins hydrogels is a suitable alternative. Here, this research aimed at supporting the capability of the plant growth-promoting bacteria Kosakonia radicincitans DSM16656T to endophytically colonize plant seedlings. In this approach, the pre-conditioned cells through osmoadaptation and hydroxyectoine accumulation were used. In general, pre-osmoadapted and hydroxyectoine-supplemented bacteria cells formulated in amidated pectin dried beads increased the endophytic activity by 10-fold. Moreover, plant promotion in radish plants enhanced by 18.9% and 20.7% for a dry matter of tuber and leaves. Confocal microscopy studies with GFP-tagged bacteria revealed that bacterial aggregates formed during the activation of beads play an essential role in early colonization stages. This research encourages the integration of fermentation and formulation strategies in a bioprocess engineering approach for exploiting endophytic bacteria.

Anhydrobiotic engineering for the endophyte bacterium Kosakonia radicincitans by osmoadaptation and providing exogenously hydroxyectoine.

This study presents an anhydrobiotic engineering approach aiming at conferring a high degree of desiccation tolerance to the Gram-negative endophyte Kosakonia radicincitans. In particular, pre-conditioning of bacteria under high salinities provides a remarkable positive influence on drying survival. The endophytic bacteria accumulate exogenous hydroxyectoine > 500 µmol g-1 dry weight cells exerted by osmotic stress at 4% NaCl. Microfermentation research demonstrated that hydroxyectoine provides positive effects on reducing the lag phase duration and alleviates the dissolved oxygen consumption under high salinity conditions. Beyond the amassing of hydroxyectoine, this work provides evidence supporting the notion that hydroxyectoine can produce significant changes in the endogenous bacterial metabolome during the exponential growth phase at high-osmolarity. Metabolome changes include alterations on tricarboxylic acid cycle, novo-synthesis of specific intracellular metabolites such as mannitol, myo-inositol and trehalose, and fold changes on amino acids such as L-leucine, L-asparagine, L-serine, L-methionine and L-proline. The significant fold change of L-aspartate suggests a potential acidic proteome at high-osmolarity environments, extending the knowledge of salt-stressed bacterial endophytes. Thus, these findings place the metabolic salt stress response and the hydroxyectoine accumulation by K. radicincitans into a physiological context, paving the way into the interaction between cellular phenotype associated with salt stress tolerance and drying survival capacity of Gram-negative endophytes.

Salt stress and hydroxyectoine enhance phosphate solubilisation and plant colonisation capacity of Kosakonia radicincitans.

Gram-negative bacterial endophytes have attracted research interest caused by their advantageous over epiphytic bacteria in plant nutrition and protection. However, research on these typically Gram-negative endophytes has deficiencies concerning the role of cultivation and pre-formulation strategies on further plant colonisation capabilities. Besides, the influence of cultivation conditions and osmotic stress within bacterial endophytes on their phosphate solubilising ability has not yet been addressed. By pre-conditioning cells with an osmoadaptation and a hydroxyectoine accumulation approach, this research aimed at enhancing the capability of the plant growth promoting bacterium Kosakonia radicincitans strain DSM 16656T to both solubilise phosphate and colonise plant seedlings. The results showed that halotolerant bacterial phenotypes increased the root-colonising capability by approximately 3-fold and presented growth-promoting effects in radish plants. Interestingly, findings also demonstrated that salt stress in the culture media along with the accumulation of hydroxyectoine led to an increase in the in vitro phosphate-solubilising ability by affecting the production of acid phosphatases, from 1.24 to 3.34 U mg-1 for non-salt stressed cells and hydroxyectoine-added cells respectively. Thus, this approach provides a useful knowledge upon which the salt stress and compatible solutes in bacteria endophytes can confer phenotypic adaptations to support the eco-physiological performance concerning phosphate-solubilising abilities and endosphere establishment.

Growth and photosynthetic activity of Chlamydomonas reinhardtii entrapped in lens-shaped silica hydrogels.

Entrapment of microalgae in silica hydrogels enables the application as biocatalysts in continuous production of secreted products. Despite a mitigation of substrate and product diffusion limitations by lens-shaped particles, there are no reports on light supply and limitation. This study investigated the impact of hydrogel structure, particle size and biomass loading on the behaviour of the microalga Chlamydomonas reinhardtii entrapped in lens-shaped silica particles. Entrapment in tetraethyl orthosilicate and tetra(n-propylamino)silane based hydrogels reduced the growth rate by 30% and 23%, respectively. In contrast, cells entrapped in sodium silicate based hydrogels displayed a growth rate similar to free cells and cells entrapped in calcium alginate (1.13 d-1), indicating a suitable biocompatibility. Reduction of lens height by 26% maintained the growth rate in silica hydrogel. A fourfold increase in biomass loading reduced the growth rate by 20% and elevated the yield coefficient by 211%, indicating the impact of biomass loading on light and nutrient supply on photosynthetic growth. Finally, hydrogen production was observed by entrapped cells. The results of this work will pave the way for robust biocatalytic processes where photosynthetically active cells are protected against harmful mechanical and biological influences.

Entrapment and growth of Chlamydomonas reinhardtii in biocompatible silica hydrogels.

In this work, we aimed at improved viability and growth of the microalga Chlamydomonas reinhardtii in transparent silica hydrogels based on low-ethanol, low-sodium and low-propylamine synthesis. Investigation into replacement of conventional base KOH by buffers dipotassium phosphate and tris(hydroxymethyl)aminomethane along with increased precursor concentrations yielded an aqueous synthesis route which provided a gelation within 10 min, absorptions below 0.1 and elastic moduli of 0.04-4.23 kPa. The abrasion resistance enhanced by 41% compared to calcium alginate hydrogels and increased to 70-85% residual material on addition of chitosan. Entrapment of microalgae in low-sodium and low-propylamine silica hydrogels maintained the PSII quantum yield above 0.3 and growth rates of 0.23 ± 0.01 d-1, similarly to cells entrapped in calcium alginate. These promising results pave the way for the entrapment of sensitive, photosynthetically active and growing cells for in robust biotechnological applications.

Endogenous arabitol and mannitol improve shelf life of encapsulated Metarhizium brunneum.

Successful commercialization of microbial biocontrol agents, such as Metarhizium spp., is often constrained by poor drying survival and shelf life. Here, we hypothesized that culture age would influence endogenous arabitol, erythritol, mannitol and trehalose contents in M. brunneum mycelium and that elevated levels of these compounds would improve drying survival and shelf life of encapsulated mycelium coupled with enhanced fungal virulence against T. molitor larvae. We found that culture age significantly influenced endogenous arabitol and mannitol contents in mycelium with highest concentrations of 0.6 ± 0.2 and 2.1 ± 0.2 µg/mg after 72 h, respectively. Drying survival of encapsulated mycelium was independent of culture age and polyol content with 41.1 ± 4.4 to 55.0 ± 6.2%. Best shelf life was determined for biomass harvested after 72 h at all investigated storage temperatures with maximum values of 59.5 ± 3.3% at 5 °C followed by 54.5 ± 1.6% at 18 °C and 19.4 ± 1.3% at 25 °C after 6 months. Finally, high fungal virulence against T. molitor larvae of 83.3 ± 7.6 to 98.0 ± 1.8% was maintained during storage of encapsulated mycelium for 12 months with larval mortalities being independent of culture age and polyol content. In conclusion, our findings indicate beneficial effects of endogenous polyols in improving shelf life of encapsulated mycelium and this may spur the successful development of microbial biocontrol agents in the future.

Design, characterisation and application of alginate-based encapsulated pig liver esterase.

Encapsulation of hydrolases in biopolymer-based hydrogels often suffers from low activities and encapsulation efficiencies along with high leaching and unsatisfactory recycling properties. Exemplified for the encapsulation of pig liver esterase the coating of alginate and chitosan beads have been studied by creating various biopolymer hydrogel beads. Enzyme activity and encapsulation efficiency were notably enhanced by chitosan coating of alginate beads while leaching remained nearly unchanged. This was caused by the enzymatic reaction acidifying the matrix, which increased enzyme retention through enhanced electrostatic enzyme-alginate interaction but decreased activity through enzyme deactivation. A practical and ready-to-use method for visualising pH in beads during reaction by co-encapsulation of a conventional pH indicator was also found. Our method proves that pH control inside the beads can only be realised by buffering. The resulting beads provided a specific activity of 0.267 µmol ∙ min-1 ∙ mg-1, effectiveness factor 0.88, encapsulation efficiency of 88%, 5% leaching and good recycling properties. This work will contribute towards better understanding and application of encapsulated hydrolases for enzymatic syntheses.

Cellulase enhances endophytism of encapsulated Metarhizium brunneum in potato plants.

The recent discovery that entomopathogenic fungi can grow endophytically in plant tissues has spurred research into novel plant protection measures. However, current applications of fungi aiming at endophytism mostly lack targeted formulation strategies resulting in low efficacy. Here, we aimed at enhancing Metarhizium brunneum CB15 endophytism in potato plants by (i) improvement of fungal growth from beads and (ii) cellulase formation or addition to encapsulated mycelium. We found that beads supplemented with cellulose alone or in addition with inactivated baker's yeast exhibited cellulase activity and increased mycelial growth by 12.6 % and 13.6 %, respectively. Higher enzymatic activity achieved by cellulase co-encapsulation promoted a shift from mycelial growth to spore formation with maximum numbers of 2.5 × 108 ± 6.1 × 107 per bead. This correlated with improved endophytism in potato plants by 61.2 % compared to non-supplemented beads. Our study provides first evidence that customized formulations of fungal entomopathogens with enzymes can improve endophytism and this may increase efficacy in plant protection strategies against herbivorous pests.

Development of an attract-and-kill co-formulation containing Saccharomyces cerevisiae and neem extract attractive towards wireworms.

BACKGROUND: Wireworms (Coleoptera: Elateridae) are major insect pests of worldwide relevance. Owing to the progressive phasing-out of chemical insecticides, there is great demand for innovative control options. This study reports on the development of an attract-and-kill co-formulation based on Ca-alginate beads, which release CO2 and contain neem extract as a bioinsecticidal compound. The objectives of this study were to discover: (1) whether neem extract can be immobilized efficiently, (2) whether CO2 -releasing Saccharomyces cerevisiae and neem extract are suitable for co-encapsulation, and (3) whether co-encapsulated neem extract affects the attractiveness of CO2 -releasing beads towards wireworms. RESULTS: Neem extract was co-encapsulated together with S. cerevisiae, starch and amyloglucosidase with a high encapsulation efficiency of 98.6% (based on measurement of azadirachtin A as the main active ingredient). Even at enhanced concentrations, neem extract allowed growth of S. cerevisiae, and beads containing neem extract exhibited CO2 -emission comparable with beads without neem extract. When applied to the soil, the beads established a CO2 gradient of >15 cm. The co-formulation containing neem extract showed no repellent effects and was attractive for wireworms within the first 24 h after exposure. CONCLUSION: Co-encapsulation of S. cerevisiae and neem extract is a promising approach for the development of attract-and-kill formulations for the control of wireworms. This study offers new options for the application of neem extracts in soil. © 2017 Society of Chemical Industry.

Knock-Down of the IFR1 Protein Perturbs the Homeostasis of Reactive Electrophile Species and Boosts Photosynthetic Hydrogen Production in Chlamydomonas reinhardtii.

The protein superfamily of short-chain dehydrogenases/reductases (SDR), including members of the atypical type (aSDR), covers a huge range of catalyzed reactions and in vivo substrates. This superfamily also comprises isoflavone reductase-like (IRL) proteins, which are aSDRs highly homologous to isoflavone reductases from leguminous plants. The molecular function of IRLs in non-leguminous plants and green microalgae has not been identified as yet, but several lines of evidence point at their implication in reactive oxygen species homeostasis. The Chlamydomonas reinhardtii IRL protein IFR1 was identified in a previous study, analyzing the transcriptomic changes occurring during the acclimation to sulfur deprivation and anaerobiosis, a condition that triggers photobiological hydrogen production in this microalgae. Accumulation of the cytosolic IFR1 protein is induced by sulfur limitation as well as by the exposure of C. reinhardtii cells to reactive electrophile species (RES) such as reactive carbonyls. The latter has not been described for IRL proteins before. Over-accumulation of IFR1 in the singlet oxygen response 1 (sor1) mutant together with the presence of an electrophile response element, known to be required for SOR1-dependent gene activation as a response to RES, in the promoter of IFR1, indicate that IFR1 expression is controlled by the SOR1-dependent pathway. An implication of IFR1 into RES homeostasis, is further implied by a knock-down of IFR1, which results in a diminished tolerance toward RES. Intriguingly, IFR1 knock-down has a positive effect on photosystem II (PSII) stability under sulfur-deprived conditions used to trigger photobiological hydrogen production, by reducing PSII-dependent oxygen evolution, in C. reinhardtii. Reduced PSII photoinhibition in IFR1 knock-down strains prolongs the hydrogen production phase resulting in an almost doubled final hydrogen yield compared to the parental strain. Finally, IFR1 knock-down could be successfully used to further increase hydrogen yields of the high hydrogen-producing mutant stm6, demonstrating that IFR1 is a promising target for genetic engineering approaches aiming at an increased hydrogen production capacity of C. reinhardtii cells.

Co-encapsulation of amyloglucosidase with starch and Saccharomyces cerevisiae as basis for a long-lasting CO2 release.

CO2 is known as a major attractant for many arthropod pests which can be exploited for pest control within novel attract-and-kill strategies. This study reports on the development of a slow-release system for CO2 based on calcium alginate beads containing granular corn starch, amyloglucosidase and Saccharomyces cerevisiae. Our aim was to evaluate the conditions which influence the CO2 release and to clarify the biochemical reactions taking place within the beads. The amyloglucosidase was immobilized with a high encapsulation efficiency of 87% in Ca-alginate beads supplemented with corn starch and S. cerevisiae biomass. The CO2 release from the beads was shown to be significantly affected by the concentration of amyloglucosidase and corn starch within the beads as well as by the incubation temperature. Beads prepared with 0.1 amyloglucosidase units/g matrix solution led to a long-lasting CO2 emission at temperatures between 6 and 25 °C. Starch degradation data correlated well with the CO2 release from beads during incubation and scanning electron microscopy micrographs visualized the degradation of corn starch granules by the co-encapsulated amyloglucosidase. By implementing MALDI-ToF mass spectrometry imaging for the analysis of Ca-alginate beads, we verified that the encapsulated amyloglucosidase converts starch into glucose which is immediately consumed by S. cerevisiae cells. When applied into the soil, the beads increased the CO2 concentration in soil significantly. Finally, we demonstrated that dried beads showed a CO2 production in soil comparable to the moist beads. The long-lasting CO2-releasing beads will pave the way towards novel attract-and-kill strategies in pest control.