Hierarchical Mechanical Transduction of Precision-Engineered DNA Hydrogels with Sacrificial Bonds.

Engineering the response to external signals in mechanically switchable hydrogels is important to promote smart materials applications. However, comparably little attention has focused on embedded precision mechanisms for autonomous nonlinear response in mechanical profiles in hydrogels, and we lack understanding of how the behavior from the molecular scale transduces to the macroscale. Here, we design a nonlinear stress-strain response into hydrogels by engineering sacrificial DNA hairpin loops into model network hydrogels formed from star-shaped building blocks. We characterize the force-extension response of single DNA hairpins and are able to describe how the specific topology influences the nonlinear mechanical behavior at different length scales. For this purpose, we utilize force spectroscopy as well as microscopic and macroscopic deformation tests. This study contributes to a better understanding of designing nonlinear strain-adaptive features into hydrogel materials.

Sangivamycin is preferentially incorporated into viral RNA by the SARS-CoV-2 polymerase.

Sangivamycin (S) is an adenosine (A) nucleoside analog with low nanomolar antiviral activity against SARS-CoV-2 in vitro. Previously, low nanomolar antiviral efficacy was revealed when tested against multiple viral variants in several cell types. SARS-CoV-2 RNA isolated from live virus infected cells and the virions released from these cells was analyzed by mass spectrometry (MS) for S incorporation. Dose-dependent incorporation occurred up to 1.8 S per 1,000 nucleotides (49 S per genome) throughout the viral genomes isolated from both infected cells and viral particles, but this incorporation did not change the viral mutation rate. In contrast, host mRNA, affinity purified from the same infected and treated cells, contained little or no S. Sangivamycin triphosphate (STP) was synthesized to evaluate its incorporation into RNA by recombinant SARS-CoV-2 RNA-dependent RNA polymerase (RdRp) under defined in vitro conditions. SARS-CoV-2 RdRp showed that S was not a chain terminator and S containing oligonucleotides templated as A. Though the antiviral mechanism remains to be determined, the data suggests that SARS-CoV-2 RdRp incorporates STP into SARS-CoV-2 RNA, which does not significantly impair viral RNA synthesis or the mutation rate.

The Aryne Phosphate Reaction.

Condensed phosphates are a critically important class of molecules in biochemistry. Non-natural analogues are important for various applications, such as single-molecule real-time DNA sequencing. Often, such analogues contain more than three phosphate units in their oligophosphate chain. Consequently, investigations into phosphate reactivity enabling new ways of phosphate functionalization and oligophosphorylation are essential. Here, we scrutinize the potential of phosphates to act as arynophiles, paving the way for follow-up oligophosphorylation reactions. The aryne phosphate reaction is a powerful tool to-depending on the perspective-(oligo)phosphorylate arenes or arylate (oligo-cyclo)phosphates. Based on Kobayashi-type o-silylaryltriflates, the aryne phosphate reaction enables rapid entry into a broad spectrum of arylated products, like monophosphates, diphosphates, phosphodiesters and polyphosphates. The synthetic potential of these new transformations is demonstrated by efficient syntheses of nucleotide analogues and an unprecedented one-flask octaphosphorylation.

Stable Isotope Phosphate Labelling of Diverse Metabolites is Enabled by a Family of 18 O-Phosphoramidites.

Stable isotope labelling is state-of-the-art in quantitative mass spectrometry, yet often accessing the required standards is cumbersome and very expensive. Here, a unifying synthetic concept for 18 O-labelled phosphates is presented, based on a family of modified 18 O2 -phosphoramidite reagents. This toolbox offers access to major classes of biologically highly relevant phosphorylated metabolites as their isotopologues including nucleotides, inositol phosphates, -pyrophosphates, and inorganic polyphosphates. 18 O-enrichment ratios >95 % and good yields are obtained consistently in gram-scale reactions, while enabling late-stage labelling. We demonstrate the utility of the 18 O-labelled inositol phosphates and pyrophosphates by assignment of these metabolites from different biological matrices. We demonstrate that phosphate neutral loss is negligible in an analytical setup employing capillary electrophoresis electrospray ionisation triple quadrupole mass spectrometry.

Stable Isotope Phosphate Labelling of Diverse Metabolites is Enabled by a Family of 18O-Phosphoramidites.

Stable isotope labelling is state-of-the-art in quantitative mass spectrometry, yet often accessing the required standards is cumbersome and very expensive. Here, a unifying synthetic concept for 18O-labelled phosphates is presented, based on a family of modified 18O2-phosphoramidite reagents. This toolbox offers access to major classes of biologically highly relevant phosphorylated metabolites as their isotopologues including nucleotides, inositol phosphates, -pyrophosphates, and inorganic polyphosphates. 18O-enrichment ratios >95 % and good yields are obtained consistently in gram-scale reactions, while enabling late-stage labelling. We demonstrate the utility of the 18O-labelled inositol phosphates and pyrophosphates by assignment of these metabolites from different biological matrices. We demonstrate that phosphate neutral loss is negligible in an analytical setup employing capillary electrophoresis electrospray ionisation triple quadrupole mass spectrometry.

Lost in Condensation: Poly-, Cyclo-, and Ultraphosphates.

Much like linear, branched, and cyclic alkanes, condensed phosphates exist as linear, branched, and cyclic structures. Inasmuch as alkanes are the cornerstone of organic chemistry, generating an inexplorably large chemical space, a comparable richness in structures can be expected for condensed phosphates, as also for them the concepts of isomerism apply. Little of their chemical space has been charted, and only a few different synthesis methods are available to construct isomers of condensed phosphates. Here, we will discuss the application of phosphoramidites with one, two, or three P-N bonds that can be substituted selectively to access different condensed phosphates in a highly controllable manner. Work directed toward the further exploration of this chemical space will contribute to our understanding of the fundamental chemistry of phosphates.In biology, condensed phosphates play important roles in the form of inorganic representatives, such as pyrophosphate, polyphosphate, and cyclophosphate, and also in conjugation with organic molecules, such as esters and amidates. Phosphorus is one of the six biogenic elements; the omnipresence of phosphates in biology points toward their critical involvement in prebiotic chemistry and the emergence of life itself. Indeed, it is hard to imagine any life without phosphate. It is therefore desirable to achieve through synthesis a better understanding of the chemistry of the condensed phosphates to further explore their biology.There is a rich but underexplored chemistry of the family of condensed phosphates per se, which is further diversified by their conjugation to important biomolecules and metabolites. For example, proteins may be polyphosphorylated on lysins, a very recent addition to posttranslational modifications. Adenosine triphosphate, as a representative of the small molecules, on the other hand, is well known as the universal cellular energy currency. In this Account, we will describe our motivations and our approaches to construct, modify, and synthetically apply different representatives of the condensed phosphates. We also describe the generation of hybrids composed of cyclic and linear structures of different oxidation states and develop them into reagents of great utility. A pertinent example is provided in the step-economic synthesis of the magic spot nucleotides (p)ppGpp. Finally, we provide an overview of 31P NMR data collected over the years in our laboratories, helping as a waymarker for not getting lost in condensation.

Thiocoumarin Caged Nucleotides: Synthetic Access and Their Photophysical Properties.

Photocages have been successfully applied in cellular signaling studies for the controlled release of metabolites with high spatio-temporal resolution. Commonly, coumarin photocages are activated by UV light and the quantum yields of uncaging are relatively low, which can limit their applications in vivo. Here, syntheses, the determination of the photophysical properties, and quantum chemical calculations of 7-diethylamino-4-hydroxymethyl-thiocoumarin (thio-DEACM) and caged adenine nucleotides are reported and compared to the widely used 7-diethylamino-4-hydroxymethyl-coumarin (DEACM) caging group. In this comparison, thio-DEACM stands out as a phosphate cage with improved photophysical properties, such as red-shifted absorption and significantly faster photolysis kinetics.

Four Phosphates at One Blow: Access to Pentaphosphorylated Magic Spot Nucleotides and Their Analysis by Capillary Electrophoresis.

The complex phosphorylation pattern of natural and modified pentaphosphorylated magic spot nucleotides is generated in a highly efficient way. A cyclic pyrophosphoryl phosphoramidite (cPyPA) reagent is used to introduce four phosphates on nucleosides regioselectively in a one-flask key transformation. The obtained magic spot nucleotides are used to develop a capillary electrophoresis UV detection method, enabling nucleotide assignment in complex bacterial extracts.

Rapid Synthesis of Nucleoside Triphosphates and Analogues.

Nucleoside triphosphates (NTPs) are essential biomolecules involved in almost all biological processes, and their study is therefore critical to understanding cellular biology. Here, we describe a chemical synthesis suitable for obtaining both natural and highly modified NTPs, which can, for example, be used as surrogates to probe biological processes. The approach includes the preparation of a reagent that enables the facile introduction and modification of three phosphate units: cyclic pyrophosphoryl P-amidite (c-PyPA), derived from pyrophosphate (PV ) and a reactive phosphoramidite (PIII ). By using non-hydrolyzable analogues of pyrophosphate, the reagent can be readily modified to obtain a family of non-hydrolyzable analogues containing CH2 , CF2 , CCl2 , and NH that are stable in solution for several weeks if stored appropriately. They enable the synthesis of NTPs by reaction with nucleosides to give deoxycyclotriphosphate esters that are then oxidized to cyclotriphosphate (cyclo-TP) esters. The use of different oxidizing agents provides an opportunity for modification at P-α. Furthermore, terminal modifications at P-γ can be introduced by linearization of the cyclo-TP ester with various nucleophiles. © 2020 The Authors. Basic Protocol 1: Synthesis of cyclic pyrophosphoryl P-amidite (c-PyPA) and derivatives (c-PyNH PA, c-PyCH2 PA, c-PyCCl2 PA, c-PyCF2 PA) Basic Protocol 2: Synthesis of 3'-azidothymidine 5'-γ-P-propargylamido triphosphates and analogues Basic Protocol 3: Synthesis of 2'-deoxythymidine 5'-γ-P-propargylamido triphosphate (15) Basic Protocol 4: Synthesis of adenosine 5'-γ-P-amido triphosphate (19) and adenosine 5'-γ-P-propargylamido triphosphate (20) Basic Protocol 5: Synthesis of d4T 5'-γ-propargylamido ß,γ-(difluoromethylene)triphosphate Support Protocol: Synthesis of diisopropylphosphoramidous dichloride.

Synthesis of Modified Nucleoside Oligophosphates Simplified: Fast, Pure, and Protecting Group Free.

Phosphoramidite analogues of modified cyclotriphosphates provide a general and step-economical synthesis of nucleoside triphosphates and analogues on scale without the need for protecting groups. These reagents enable rapid access to pure nucleoside oligophosphates and a range of other analogues that were previously difficult to obtain (e.g., NH, CH2, CCl2, and CF2 replacements for O, phosphono- and phosphoimidazolides, -morpholidates, -azidates, and -fluoridates). DFT calculations demonstrate that the selectivity of the cyclotriphosphate opening reactions proceeds via an in-line substitution mechanism that displaces the least charged leaving group.

Investigations on non-classical silylium ions leading to a cyclobutenyl cation.

Instead of yielding the desired non-classical silylium ions, the reactions of different alkenes/alkynes with several [Me3Si]+ sources mostly led to oligomerization, or - in the presence of Me3SiH - hydrosilylation of the alkenes/alkynes. Yet, from the reaction of 2-butyne with ion-like Me3Si-F-Al(ORF)3 (RF = C(CF3)3) the salt of the silylated tetramethyl cyclobutenyl cation [Me4C4-SiMe3]+[al-f-al]- 1 ([al-f-al]- = [(RFO)3Al-F-Al(ORF)3]-) was obtained in good yield (NMR, scXRD, Raman, and IR). All the experimental and calculated evidence suggest a mechanism in which 1 was formed via a non-classical silylium ion as an intermediate. The removal of the [Me3Si]+ moiety from the cation in 1 was investigated as a means to provide free tetramethyl cyclobutadiene (CBD). However, the addition of [NMe4]F, in order to release Me3SiF and form CBD, led to the unexpected deprotonation of the cation. The addition of 4-dimethylaminopyridine to remove the [Me3Si]+ cation as a Lewis acid/base adduct, led to an adduct with the four-membered ring in the direct neighborhood of the Me3Si group. By the addition of Et2O to a solution of 1, the [F-Al(ORF)3]- anion (and Et2O-Al(ORF)3) was generated from the [al-f-al]- counterion. Subsequently, the [F-Al(ORF)3]- anion abstracted the [Me3Si]+ moiety from [Me4C4-SiMe3]+, probably releasing CBD. However, due to the immediate reaction of CBD with [Me4C4-SiMe3]+ and subsequent oligomerization, it was not possible to use CBD in follow-up chemistry.

A Phosphoramidite Analogue of Cyclotriphosphate Enables Iterative Polyphosphorylations.

An iterative polyphosphorylation approach is described, which is based on a phosphoramidite (P-amidite) derived reagent (c-PyPA) obtained from the cyclization of pyrophosphate with a reactive diisopropylaminodichlorophosphine. This type of reagent is unprecedented as it represents a reactive P-amidite without protecting groups. The reagent proved to be stable in solution over several weeks. Its utility is described in the context of iterative monodirectional and bidirectional polyphosphorylations. The ensuing functionalized cyclotriphosphate can be opened with a variety of nucleophiles providing ready access to diverse functionalized polyphosphate chains of defined length with several tags, including both P-N and P-O labels. Their interaction with exo- and endopolyphosphatases is described.

Using the Lewis Acid Me3 Si-F-Al(ORF )3 To Prepare Phosphino-Phosphonium Cations with the Least-Coordinating Anion [(RF O)3 Al-F-Al(ORF )3 ].

By reaction of two equivalents of Me3 Si-F-Al(ORF )3 1 with an equimolar amount of PPh2 Cl, the salt [Ph2 P-PPh2 Cl]+ [(RF O)3 Al-F-Al(ORF )3 ]- 2 is prepared smoothly in 91 % yield (NMR, XRD). The synthesis of [Ph2 P-PPh3 ]+ [(RF O)3 Al-F-Al(ORF )3 ]- 3 is best achieved by a two-step reaction: first, two equivalents of 1 react with one PPh3 to give [Me3 Si-PPh3 ]+ [(RF O)3 Al-F-Al(ORF )3 ]- 4 (NMR, XRD), which, upon reaction with PPh2 Cl, yields pure 3 and Me3 SiCl (NMR, XRD). Typically, a stoichiometry of two equivalents of 1 with respect to one equivalent of the chloride donor should be used. Otherwise, the residual strong Lewis acidity of the [(RF O)3 Al-F-Al(ORF )3 ]- anion in the presence of the [F-Al(ORF )3 ]- anion-that forms with less than two equivalents of 1-leads to further chloride exchange reactions that complicate work-up. This route presents the easiest way to introduce the least-coordinating [(RF O)3 Al-F-Al(ORF )3 ]- anion into a system. We expect a wide use of this route in all areas, in which chloride-bond heterolysis in combination with very weakly coordinating anions is desirable. Additionally, we performed calculations on the bond dissociation mechanisms of [R2 P-PMe3 ]+ and the isoelectronic Me2 P-SiMe3 and Me2 Si-PMe3 in dependence of the solvent permittivity. These calculations show, especially for the neutral reference compounds, a heavy influence of the solvent on the dissociation mechanism, which is why we suggest investigating these properties in solution instead of gas phase.