ABSTRACT
Single-atom catalysts (SACs) have attracted considerable research interest owing to their combined merits of homogeneous and heterogeneous catalysts. However, the uniform and isolated active sites of SACs fall short in catalysing complex chemical processes that simultaneously involve multiple intermediates. In this Review, we highlight an emerging class of catalysts with adjacent binary active centres, which is called integrative catalytic pairs (ICPs), showing not only atomic-scale site-to-site electronic interactions but also synergistic catalytic effects. Compared with SACs or their derivative dual-atom catalysts (DACs), multi-interactive intermediates on ICPs can overcome kinetic barriers, adjust reaction pathways and break the universal linear scaling relations as the smallest active units. Starting from this active-site design principle, each single active atom can be considered as a brick to further build integrative catalytic clusters (ICCs) with desirable configurations, towards trimer or even larger multi-atom units depending on the requirement of a given reaction.
ABSTRACT
ß-Amino nitriles are important molecular scaffolds. Cyanoalkylation of imines is the most straightforward method for the construction of these scaffolds. In this study, we report the novel cyanoalkylation of imines via radical coupling enabled by a photoactive electron donor-acceptor complex. This strategy is characterized by mild conditions, broad reaction scopes, and high atom economy. The scalability and practicality of this strategy are demonstrated by a 40 g continuous flow system from which a variety of important pharmaceutical-related molecules were obtained.
ABSTRACT
Providing affordable, safe drinking water and universal sanitation poses a grand societal challenge. Here we developed atomically dispersed Au on potassium-incorporated polymeric carbon nitride material that could simultaneously boost photocatalytic generation of ·OH and H2O2 with an apparent quantum efficiency over 85% at 420 nm. Potassium introduction into the poly(heptazine imide) matrix formed strong K-N bonds and rendered Au with an oxidation number close to 0. Extensive experimental characterization and computational simulations revealed that the low-valent Au altered the materials' band structure to trap highly localized holes produced under photoexcitation. These highly localized holes could boost the 1e- water oxidation reaction to form highly oxidative ·OH and simultaneously dissociate the hydrogen atom in H2O, which greatly promoted the reduction of oxygen to H2O2. The photogenerated ·OH led to an efficiency enhancement for visible-light-response superhydrophilicity. Furthermore, photo-illumination in an onsite fixed-bed reactor could disinfect water at a rate of 66 L H2O m-2 per day.
ABSTRACT
Developing mild photocatalytic bromination strategies using sustainable bromo source has been attracting intense interests, but there is still much room for improvement. Full utilization of redox centers of photocatalysts for efficient generation of Br+ species is the key. Herein we report heterogenous organophotocatalytic HBr oxidation coupled with oxygen reduction to furnish Br2 and H2O2 for effective bromination of arenes over Al2O3 supported perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). Mechanism studies suggest that O-vacancy in Al2O3 can provide Lewis-acid-type anchoring sites for O2, enabling unexpected dual-electron transfer from anchored photoexcited PTCDA to chemically bound O2 to produce H2O2. The in-situ generated H2O2 and Br2 over redox centers work together to generate HBrO for bromination of arenes. This work provides new insights that heterogenization of organophotocatalysts can not only help to improve their stability and recyclability, but also endow them with the ability to trigger unusual reaction mode via cooperative catalysis with supports.
ABSTRACT
Spirocyclic compounds are abundant in biologically active products. However, the divergent synthesis of spirocyclic compounds using low-cost and abundant available starting materials remains a challenge. Herein, we report an effective method for producing spirocyclic motifs using a cyclic ß-carbonyl ester or amide and ethylene via thianthrenation. This strategy highlights the exciting possibility of utilizing abundant ethylene as a C-2 synthon and allows regulating the core structure of the spirocyclic compound by simply altering the base type.
ABSTRACT
Few-atom metal clusters (FAMCs) exhibit superior performance in catalyzing complex molecular transformations due to their special spatial environments and electronic states, compared to single-atom catalysts (SACs). However, achieving the efficient and accurate synthesis of FAMCs while avoiding the formation of other species, such as nanoparticles and SACs, still remains challenges. Herein, we report a two-step strategy for synthesis of few-atom platinum (Pt) clusters by predeposition of zinc single-atom-glue (Zn1) on MgO nanosheets (Ptn-Zn1/MgO), where FAMCs can be obtained over a wide range of Pt contents (0.09 to 1.45â wt %). Zn atoms can act as Lewis acidic sites to allow electron transfer between Zn and Pt through bridging O atoms, which play a crucial role in the formation and stabilization of few-atom Pt clusters. Ptn-Zn1/MgO exhibited a high selectivity of 93 % for anti-Markovnikov alkene hydrosilylation. Moreover, an excellent activity with a turnover frequency of up to 1.6×104â h-1 can be achieved, exceeding most of the reported Pt SACs. Further theoretical studies revealed that the Pt atoms in Ptn-Zn1/MgO possess moderate steric hindrance, which enables high selectivity and activity for hydrosilylation. This work presents some guidelines for utilizing atomic-scale species to increase the synthesis efficiency and precision of FAMCs.
ABSTRACT
Perylenetetracarboxylic dianhydride (PTCDA) derivatives have received significant attention as molecule photocatalysts. However, the poor recyclability of molecule-type photocatalysts hinders their widespread applications. Herein, immobilization of PTCDA on Al2O3 was achieved by simply physical mixing, which not only dramatically improved their recyclability, but also surprisingly improved the reactivity. A mechanism study suggested that the photo-exited state (PTCDA*) of PTCDA could promote the oxidation of thioanisole to generate PTCDAâ¢-, which sequentially reduces oxygen to furnish superoxide radicals to achieve the catalytic cycle. Herein, the immobilization support Al2O3 was able to facilitate the strong adsorption of thioanisole, thereby boosting the photocatalytic activity. This work provides a new insight that the immobilization of organic molecular photocatalysts on those supports with proper adsorption sites could furnish highly efficient, stable, and recyclable molecular-based heterogeneous photocatalysts.
ABSTRACT
C-1-deuterated aldehydes are essential building blocks in the synthesis of deuterated chemicals and pharmaceuticals. This has led chemists to devise mild methodologies for their efficient production. Ideally, hydrogen-deuterium exchange (HDE) is the most effective approach. However, the traditional HDE for creating C-1-deuterated aldehydes often requires a complex system involving multiple catalysts and/or ligands. In this study, we present a mild photocatalytic HDE of the formyl C-H bond with D2O. This process is facilitated by chlorine radicals that are generated in situ from low-cost FeCl3. This strategy demonstrated a broad reaction scope and high functional group tolerance, affording good yields and ≤99% D incorporation. To bridge the gap between research and industrial applications, we designed a new flow photoreactor equipped with a high-intensity light-emitting diode bucket, enabling the synthesis of C-1-deuterated aldehydes on a scale of 85 g. Finally, we successfully produced several important deuterated aldehydes that are integral to the synthesis of deuterated pharmaceuticals.
ABSTRACT
Heteroatom-adjacent C(sp3) radical cyclization of N-arylacrylamides provides a straightforward pathway to synthesize valuable 3-functionalized oxindoles. Traditional cyclization reactions normally require harsh conditions or transition-metal catalysts. Here, we developed a metal-free, diversity-oriented synthesis of 3-functionalized oxindoles via photochemically induced selective cleavage of C(sp3)-H bonds. A variety of 3-substituted oxindoles with functionalities such as ethers, polyhalogens, benzyl, and formyl groups can be obtained by a rational design. This strategy is characterized by its simple operation and mild conditions, aligning well with the developmental requirements for sustainable chemistry. The gram-scale continuous-flow synthesis and efficient construction of bioactive molecules highlight its practical utility.
ABSTRACT
Activation of carbon-hydrogen (C-H) bonds is of utmost importance for the synthesis of vital molecules. Toward achieving efficient photocatalytic C-H activation, our investigation revealed that incorporating hydrophilic C≡N-Sb(CN)3 sites into hydrophobic sp2 carbon-conjugated covalent organic frameworks (sp2-c-COFs) had a dual effect: It simultaneously enhanced charge separation and improved generation of polar reactive oxygen species. Detailed spectroscopy measurements and simulations showed that C≡N-Sb(CN)3 primarily functioned as water capture sites, which were not directly involved in photocatalysis. However, the potent interaction between water molecules and the Sb(CN)3-modified framework notably enhanced charge dynamics in hydrophobic sp2-c-COFs. The reactive species ·O2- and ·OH (ad) subsequently combined with benzyl radical, leading to the formation of benzaldehyde, benzyl alcohol, and lastly benzyl benzoate. Notably, the Sb(CN)3-modified sp2-c-COFs exhibited a 54-fold improvement in reaction rate as compared to pristine sp2-c-COFs, which achieved a remarkable 68% conversion rate for toluene and an 80% selectivity for benzyl benzoate.
ABSTRACT
Glycerol is a byproduct of biodiesel production. Selective photoelectrochemical oxidation of glycerol to high value-added chemicals offers an economical and sustainable approach to transform renewable feedstock as well as store green energy at the same time. In this work, we synthesized monoclinic WO3 nanosheets with exposed (002) facets, which could selectively oxidize glycerol to glyceric acid (GLYA) with a photocurrent density of 1.7â mA cm-2 , a 73 % GLYA selectivity and a 39 % GLYA Faradaic efficiency at 0.9â V vs. reversible hydrogen electrode (RHE) under AM 1.5G illumination (100â mW cm-2 ). Compared to (200) facets exposed WO3 , a combination of experiments and theoretical calculations indicates that the superior performance of selective glycerol oxidation mainly originates from the better charge separation and prolonged carrier lifetime resulted from the plenty of surface trapping states, lower energy barrier of the glycerol-to-GLYA reaction pathway, more abundant active sites and stronger oxidative ability of photogenerated holes on the (002) facets exposed WO3 . Our findings show great potential to significantly contribute to the sustainable and environmentally friendly chemical processes via designing high performance photoelectrochemical cell via facet engineering for renewable feedstock transformation.
ABSTRACT
Herein, we describe a metal-free approach for the cross-coupling of arenes or styryl-thianthrenium salts (TTs) with diarylphosphines via an electron donor-acceptor (EDA) complex. Various tertiary phosphines were obtained with high site selectivity and good functional group tolerance. This method enables straightforward construction of C-P bonds via C-H activation of arenes and allows the late-stage functionalization of natural products or pharmaceutical molecules. Mechanistic studies support the approach involving a photoinduced EDA complex.
ABSTRACT
Organic semiconductor materials hold promising applications in photocatalytic hydrogen evolution due to their high modifiability and wide range of light absorption capability. In this study, we present an effective strategy for promoting the separation of photoexcited electrons from organic conjugated centers to active sites by modifying different nitrogen-containing groups on pyrene molecules. Building on this foundation, the well-designed catalyst Py-m-2N has demonstrated good performance by achieving a photocatalytic hydrogen evolution rate of 48.86 mmol g-1 h-1, even in the absence of the precious metal platinum cocatalyst. This achievement places the pyrene-based photocatalyst ahead of the majority of its organic counterparts. Our comprehensive characterization and density functional theory calculations reveal that the nitrogen atom not only serves as an active site for hydrogen production but also plays a pivotal role in efficiently accumulating bulk-phase electrons. This electron enrichment process enhances the transport of photoexcited electrons from the light-absorbing pyrene units to the active nitrogen sites. This work provides inspiration for the future design of effective nitrogen-atom-modified organic semiconductor photocatalysts at the molecular level.
ABSTRACT
In this work, via engineering the conformation of cobalt active center in cobalt phthalocyanine molecular catalyst, the catalytic efficiency of electrochemical carbon monoxide reduction to methanol can be dramatically tuned. Based on a collection of experimental investigations and density functional theory calculations, it reveals that the electron rearrangement of the Co 3d orbitals of cobalt phthalocyanine from the low-spin state (S = 1/2) to the high-spin state (S = 3/2), induced by molecular conformation change, is responsible for the greatly enhanced CO reduction reaction performance. Operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements disclose accelerated hydrogenation of CORR intermediates, and kinetic isotope effect validates expedited proton-feeding rate over cobalt phthalocyanine with high-spin state. Further natural population analysis and density functional theory calculations demonstrate that the high spin Co2+ can enhance the electron backdonation via the dxz/dyz-2π* bond and weaken the C-O bonding in *CO, promoting hydrogenation of CORR intermediates.
ABSTRACT
Single-atom catalysts (SACs) are regarded as promising non-noble-metal alternatives for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells due to their high atom utilization efficiency and excellent catalytic properties. However, the insufficient long-term stability issues of SACs under the working conditions seriously hinder their practical application. In this perspective, the recent progress of SACs with optimized ORR catalytic activity is first reviewed. Then, the possible degradation mechanisms of SACs in the ORR process and effective strategies for improving their ORR durability are summarized. Finally, some challenges and opportunities are proposed to develop stable single-atom-based ORR electrocatalysts in the future.
ABSTRACT
Revealing the photocatalytic mechanism between various junctions and catalytic activities has become a hotspot in photocatalytic systems. Herein, an internal molecular heptazine/triazine (H/T) junction in crystalline carbon nitride (HTCN) is constructed and devoted to selective two-electron oxygen reduction reaction (2e- ORR) for efficient hydrogen peroxide (H2 O2 ) production. In-situ X-ray diffraction spectra under various temperatures authenticate the successful formation of molecular H/T junction in HTCN during the calcining process rather than physically mixing. The increased surface photovoltage and transient photovoltage signals, and the decreased exciton binding energy undoubtably elucidate that an obvious increasement of carrier density and diffusion capability of photogenerated electrons are realized over HTCN. Additionally, the analyses of in situ photoirradiated Kelvin probe force microscopy and femto-second transient absorption spectra reveal the successful construction of the strong internal built-in-electric field and the existence of the majority of long-lived shallow trapped electrons associated with molecular H/T junction over HTCN, respectively. Benefiting from these, the photocatalytic results exhibit an incredible improvement (96.5-fold) for H2 O2 production. This novel work provides a comprehensive understanding of the long-lived reactive charges in molecular H/T junctions for strengthening the driving-force for photocatalytic H2 O2 production, which opens potential applications for enhancing PCN-based photocatalytic redox reactions.
ABSTRACT
Constructing atomic catalytic pair emerges as an attractive strategy to achieve better catalytic performance. Herein, an atomic Ir1 âP1 /NPG catalyst with asymmetric IrâN2 P1 sites that delivers superb activity and selectivity for hydrogenation of various functionalized nitrostyrene is reported. In the hydrogenation reaction of 3-nitrostyrene, Ir1 âP1 /NPG (NPG refers to N, P-codoped graphene) shows a turnover frequency of 1197 h-1 , while the reaction cannot occur over Ir1 /NG (NG refers to N-doped graphene). Compared to Ir1 /NG, the charge density of the Ir site in Ir1 âP1 /NPG is greatly elevated, which is conducive to H2 dissociation. Moreover, as revealed by density functional theory calculations and poisoning experiments, the P site in Ir1 âP1 /NPG is found able to bind nitrostyrene, while the neighboring Ir site provides H to reduce the nitro group in chemoselective hydrogenation of nitrostyrene. This work offers a successful example of establishing atomic catalytic pair for driving important chemical reactions, paving the way for the development of more advanced catalysts to further improve the catalytic performance.
ABSTRACT
Patterning antidots, which are regions of potential hills that repel electrons, into well-defined antidot lattices creates fascinating artificial periodic structures, leading to anomalous transport properties and exotic quantum phenomena in two-dimensional systems. Although nanolithography has brought conventional antidots from the semiclassical regime to the quantum regime, achieving precise control over the size of each antidot and its spatial period at the atomic scale has remained challenging. However, attaining such control opens the door to a new paradigm, enabling the creation of quantum antidots with discrete quantum hole states, which, in turn, offer a fertile platform to explore novel quantum phenomena and hot electron dynamics in previously inaccessible regimes. Here we report an atomically precise bottom-up fabrication of a series of atomic-scale quantum antidots through a thermal-induced assembly of a chalcogenide single vacancy in PtTe2. Such quantum antidots consist of highly ordered single-vacancy lattices, spaced by a single Te atom, reaching the ultimate downscaling limit of antidot lattices. Increasing the number of single vacancies in quantum antidots strengthens the cumulative repulsive potential and consequently enhances the collective interference of multiple-pocket scattered quasiparticles inside quantum antidots, creating multilevel quantum hole states with a tunable gap from the telecom to far-infrared regime. Moreover, precisely engineered quantum hole states of quantum antidots are geometry protected and thus survive on oxygen substitutional doping. Therefore, single-vacancy-assembled quantum antidots exhibit unprecedented robustness and property tunability, positioning them as highly promising candidates for advancing quantum information and photocatalysis technologies.
ABSTRACT
Vortex beams with optical orbital angular momentum have broad prospects in future high-speed and large-capacity optical communication. In this investigation of materials science, we found that low-dimensional materials have feasibility and reliability in the development of optical logic gates in all-optical signal processing and computing technology. We found that spatial self-phase modulation patterns through the MoS2 dispersions can be modulated by the initial intensity, phase, and topological charge of a Gauss vortex superposition interference beam. We utilized these three degrees of freedom as the input signals of the optical logic gate, and the intensity of a selected checkpoint on spatial self-phase modulation patterns as the output signal. By setting appropriate thresholds as logic codes 0 and 1, two sets of novel optical logic gates, including AND, OR, and NOT gates, were implemented. These optical logic gates are expected to have great potential in optical logic operations, all-optical networks, and all-optical signal processing.