ABSTRACT
The true value of the contact angle between a liquid and a solid is a thorny problem in capillary microfluidics. The Lucas-Washburn-Rideal (LWR) law assumes a constant contact angle during fluid penetration. However, recent experimental studies have shown lower liquid velocities than those predicted by the LWR equation, which are attributed to a velocity-dependent dynamic contact angle that is larger than its static value. Inspection of fluid penetration in closed channels has confirmed that a dynamic angle is needed in the LWR equation. In this work, the dynamic contact angle in an open-channel configuration is investigated using experimental data obtained with a range of liquids, aqueous and organic, and a PMMA substrate. We demonstrate that a dynamic contact angle must be used to explain the early stages of fluid penetration, i.e., at the start of the viscous regime, when flow velocities are sufficiently high. Moreover, the open-channel configuration, with its free surface, enhances the effect of the dynamic contact angle, making its inclusion even more important. We found that for the liquids in our study, the molecular-kinetic theory is the most accurate in predicting the effect of the dynamic contact angle on liquid penetration in open channels.
ABSTRACT
Importance: Obtaining high-quality samples to diagnose streptococcal pharyngitis in pediatric patients is challenging due to discomfort associated with traditional pharyngeal swabs. This may cause reluctance to go to the clinic, inaccurate diagnosis, or inappropriate treatment for children with sore throat. Objective: Determine the efficacy of using CandyCollect, a lollipop-inspired open-microfluidic pathogen collection device, to capture Group A Streptococcus (GAS) and compare user preference for CandyCollect, conventional pharyngeal swabs, or mouth swabs among children with pharyngitis and their caregivers. Design: Participants of this cohort study were recruited over a 7-month period in 2022 - 2023. Setting: This study was conducted at an ambulatory care clinic that serves pediatric patients in the Madison, Wisconsin, metropolitan area. Participants: Study participants were diagnosed with GAS pharyngitis using a traditional pharyngeal swab via rapid antigen detection test (RADT); those testing positive were approached or reached out to about participation in the study. A total of 74 caregiver/children dyads were contacted about the study: 23 declined to participate; 21 were not eligible; and 30 willing and eligible participants were admitted into the study. A caregiver provided verbal consent and parental permission, and all children provided verbal assent. Immediately after the standard of care visit in which the throat swab was obtained, a research nurse guided participants through collecting oral samples: CandyCollect device and mouth swab (ESwab TM ). CandyCollect and mouth swab samples were analyzed for GAS by quantitative polymerase chain reaction (qPCR) at the University of Washington. Exposure: Detection of salivary GAS using qPCR analysis of samples obtained from CandyCollect devices and mouth swabs. Main Outcomes and Measures: The proportion of pediatric patients with GAS pharyngitis, as determined by a positive pharyngeal swab tested via a RADT, who were also positive using a CandyCollect and mouth swab analyzed by qPCR. Results: All child participants (30/30) were positive for GAS by qPCR on both the mouth swab and CandyCollect. Caregivers ranked CandyCollect as a good sampling method overall (27/30), and all caregivers (30/30) would recommend the CandyCollect for children 5 years and older. Twenty-three of 30 children "really like" the taste and 24/30 would prefer to use the CandyCollect if a future test was needed. All caregivers (30/30) and most children (28/30) would be willing to use the CandyCollect device at home. Conclusion and relevance: All participants tested positive for GAS on all three collection methods (pharyngeal swab, mouth swab, and CandyCollect). While both caregivers and children like the CandyCollect device, some caregivers would prefer a shorter collection time. Future work includes additional studies with larger cohorts presenting with pharyngitis of unknown etiology and shortening collection time, while maintaining the attractive form of the device. Trial Registration: Registry name: ClinicalTrials.gov ClinicalTrials.gov Identifier: NCT05175196 Weblink: https://classic.clinicaltrials.gov/ct2/show/NCT05175196. Key Points: Question: In pediatric patients with Group A Streptococcus pharyngitis, how do test results and user experience compare across three sampling methods-CandyCollect devices, mouth swabs, and pharyngeal swabs?Findings: In this cohort study of 30 children, aged 5-14 years, saliva samples were collected with CandyCollect devices and mouth swabs and analyzed via qPCR. The results show CandyCollect, a pathogen collection tool preferred by children, had 100% concordance with the results from pharyngeal swabs positive with a rapid antigen detection test performed as part of their clinical care.Meaning: With further development and testing, the CandyCollect device may potentially become an alternative sampling tool for the diagnosis of streptococcal pharyngitis.
ABSTRACT
The true value of the contact angle between a liquid and a solid is a thorny problem in capillary microfluidics. The Lucas-Washburn-Rideal (LWR) law assumes a constant contact angle during fluid penetration. However, recent experimental studies have shown lower liquid velocities than predicted by the LWR equation, which are attributed to a velocity-dependent dynamic contact angle that is larger than its static value. Inspection of fluid penetration in closed channels has confirmed that a dynamic angle is needed in the LWR equation. In this work, the dynamic contact angle in an open channel configuration is investigated using experimental data obtained with a range of liquids, aqueous and organic, and a PMMA substrate. We demonstrate that a dynamic contact angle must be used to explain the early stages of fluid penetration, i.e., at the start of the viscous regime, when flow velocities are sufficiently high. Moreover, the open channel configuration, with its free surface, enhances the effect of the dynamic contact angle, making its inclusion even more important. We found that for the liquids in our study, the molecular-kinetic theory (MKT) is the most accurate in predicting the effect of the dynamic contact angle on liquid penetration in open channels.
ABSTRACT
Respiratory infections are common in children, and there is a need for user-friendly collection methods. Here, we performed the first human subjects study using the CandyCollect device, a lollipop-inspired saliva collection device .We showed that the CandyCollect device can be used to collect salivary bacteria from healthy adults using Streptococcus mutans and Staphylococcus aureus as proof-of-concept commensal bacteria. We enrolled healthy adults in a nationwide (USA) remote study in which participants were sent study packages containing CandyCollect devices and traditional commercially available oral swabs and spit tubes. Participants sampled themselves at home, completed usability and user preference surveys, and mailed the samples back to our laboratory for analysis by qPCR. Our results showed that for participants in which a given bacterium (S. mutans or S. aureus) was detected in one or both of the commercially available methods (oral swab and/or spit tubes), CandyCollect devices had a 100% concordance with the positive result (n = 14 participants). Furthermore, the CandyCollect device was ranked the highest preference sampling method among the three sampling methods by 26 participants surveyed (combining survey results across two enrollment groups). We also showed that the CandyCollect device has a shelf life of up to 1 year at room temperature, a storage period that is convenient for clinics or patients to keep the CandyCollect device and use it any time. Taken together, we have demonstrated that the CandyCollect is a user-friendly saliva collection tool that has the potential to be incorporated into diagnostic assays in clinic visits and telemedicine.
Subject(s)
Saliva , Staphylococcus aureus , Child , Humans , Adult , Saliva/microbiology , Specimen Handling/methods , Streptococcus mutans , LaboratoriesABSTRACT
Open droplet microfluidic systems manipulate droplets on the picolitre-to-microlitre scale in an open environment. They combine the compartmentalization and control offered by traditional droplet-based microfluidics with the accessibility and ease-of-use of open microfluidics, bringing unique advantages to applications such as combinatorial reactions, droplet analysis and cell culture. Open systems provide direct access to droplets and allow on-demand droplet manipulation within the system without needing pumps or tubes, which makes the systems accessible to biologists without sophisticated setups. Furthermore, these systems can be produced with simple manufacturing and assembly steps that allow for manufacturing at scale and the translation of the method into clinical research. This Review introduces the different types of open droplet microfluidic system, presents the physical concepts leveraged by these systems and highlights key applications.
Subject(s)
Biology , Microfluidics , Microfluidics/methodsABSTRACT
Respiratory infections are common in children, and there is a need for user-friendly collection methods. Here, we performed the first human subjects study using the CandyCollect device, a lollipop inspired saliva collection device. 1 We showed the CandyCollect device can be used to collect salivary bacteria from healthy adults using Streptococcus mutans and Staphylococcus aureus as proof-of-concept commensal bacteria. We enrolled healthy adults in a nationwide (USA) remote study in which participants were sent study packages containing CandyCollect devices and traditional commercially available oral swabs and spit tubes. Participants sampled themselves at home, completed usability and user preference surveys, and mailed the samples back to our laboratory for analysis by qPCR. Our results showed that for participants in which a given bacterium ( S. mutans or S. aureus ) was detected in one or both of the commercially available methods (oral swab and/or spit tubes), CandyCollect devices had a 100% concordance with the positive result (n=14 participants). Furthermore, the CandyCollect device was ranked the highest preference sampling method among the three sampling methods by 26 participants surveyed (combining survey results across two enrollment groups). We also showed that the CandyCollect device has a shelf life of up to 1 year at room temperature, a storage period that is convenient for clinics or patients to keep the CandyCollect device and use it any time. Taken together, we have demonstrated that the CandyCollect is a user-friendly saliva collection tool that has the potential to be incorporated into diagnostic assays in clinic visits and telemedicine.
ABSTRACT
Streptococcus pyogenes is a major human-specific bacterial pathogen and a common cause of a wide range of symptoms from mild infection such as pharyngitis (commonly called strep throat) to life-threatening invasive infection and post-infectious sequelae. Traditional methods for diagnosis include collecting a sample using a pharyngeal swab, which can cause discomfort and even discourage adults and children from seeking proper testing and treatment in the clinic. Saliva samples are an alternative to pharyngeal swabs. To improve the testing experience for strep throat, we developed a novel lollipop-inspired sampling platform (called CandyCollect) to capture bacteria in saliva. The device can be used in clinics or in the home and shipped back to a lab for analysis, integrating with telemedicine. CandyCollect is designed to capture bacteria on an oxygen plasma treated polystyrene surface embedded with flavoring substances to enhance the experience for children and inform the required time to complete the sampling process. In addition, the open channel structure prevents the tongue from scraping and removing the captured bacteria. The flavoring substances did not affect bacterial capture and the device has a shelf life of at least 2 months (with experiments ongoing to extend the shelf life). We performed a usability study with 17 participants who provided feedback on the device design and the dissolving time of the candy. This technology and advanced processing techniques, including polymerase chain reaction (PCR), will enable user-friendly and effective diagnosis of streptococcal pharyngitis.
Subject(s)
Pharyngitis , Streptococcal Infections , Adult , Child , Humans , Pharyngitis/diagnosis , Pharyngitis/microbiology , Polymerase Chain Reaction , Saliva , Streptococcal Infections/diagnosis , Streptococcal Infections/microbiology , Streptococcus pyogenes/geneticsABSTRACT
Expanding whole blood sample collection for transcriptome analysis beyond traditional phlebotomy clinics will open new frontiers for remote immune research and telemedicine. Determining the stability of RNA in blood samples exposed to high ambient temperatures (>30°C) is necessary for deploying home-sampling in settings with elevated temperatures (e.g., studying physiological response to natural disasters that occur in warm locations or in the summer). Recently, we have developed homeRNA, a technology that allows for self-blood sampling and RNA stabilization remotely. homeRNA consists of a lancet-based blood collection device, the Tasso-SST™ which collects up to 0.5 ml of blood from the upper arm, and a custom-built stabilization transfer tube containing RNAlater™. In this study, we investigated the robustness of our homeRNA kit in high temperature settings via two small pilot studies in Doha, Qatar (no. participants = 8), and the Western and South Central USA during the summer of 2021, which included a heatwave of unusually high temperatures in some locations (no. participants = 11). Samples collected from participants in Doha were subjected to rapid external temperature fluctuations from being moved to and from air-conditioned areas and extreme heat environments (up to 41°C external temperature during brief temperature spikes). In the USA pilot study, regions varied in outdoor temperature highs (between 25°C and 43.4°C). All samples that returned a RNA integrity number (RIN) value from the Doha, Qatar group had a RIN ≥7.0, a typical integrity threshold for downstream transcriptomics analysis. RIN values for the Western and South Central USA samples (n = 12 samples) ranged from 6.9-8.7 with 9 out of 12 samples reporting RINs ≥7.0. Overall, our pilot data suggest that homeRNA can be used in some regions that experience elevated temperatures, opening up new geographical frontiers in disseminated transcriptome analysis for applications critical to telemedicine, global health, and expanded clinical research. Further studies, including our ongoing work in Qatar, USA, and Thailand, will continue to test the robustness of homeRNA.
ABSTRACT
Progress in real-time, simultaneous in vivo detection of multiple neurotransmitters will help accelerate advances in neuroscience research. The need for development of probes capable of stable electrochemical detection of rapid neurotransmitter fluctuations with high sensitivity and selectivity and sub-second temporal resolution has, therefore, become compelling. Additionally, a higher spatial resolution multi-channel capability is required to capture the complex neurotransmission dynamics across different brain regions. These research needs have inspired the introduction of glassy carbon (GC) microelectrode arrays on flexible polymer substrates through carbon MEMS (C-MEMS) microfabrication process followed by a novel pattern transfer technique. These implantable GC microelectrodes provide unique advantages in electrochemical detection of electroactive neurotransmitters through the presence of active carboxyl, carbonyl, and hydroxyl functional groups. In addition, they offer fast electron transfer kinetics, capacitive electrochemical behavior, and wide electrochemical window. Here, we combine the use of these GC microelectrodes with the fast scan cyclic voltammetry (FSCV) technique to optimize the co-detection of dopamine (DA) and serotonin (5-HT) in vitro and in vivo. We demonstrate that using optimized FSCV triangular waveform at scan rates ≤700 V s-1 and holding and switching at potentials of 0.4 and 1 V respectively, it is possible to discriminate voltage reduction and oxidation peaks of DA and 5-HT, with 5-HT contributing distinct multiple oxidation peaks. Taken together, our results present a compelling case for a carbon-based MEA platform rich with active functional groups that allows for repeatable and stable detection of electroactive multiple neurotransmitters at concentrations as low as 1.1 nM.
Subject(s)
Dopamine , Serotonin , Carbon , Electrochemical Techniques , Microelectrodes , Neurotransmitter AgentsABSTRACT
The studies described in this paper for the first time characterize the acute and chronic performance of optically transparent thin-film micro-electrocorticography (µECoG) grids implanted on a thinned skull as both an electrophysiological complement to existing thinned skull preparation for optical recordings/manipulations, and a less invasive alternative to epidural or subdurally placed µECoG arrays. In a longitudinal chronic study, µECoG grids placed on top of a thinned skull maintain impedances comparable to epidurally placed µECoG grids that are stable for periods of at least 1 month. Optogenetic activation of cortex is also reliably demonstrated through the optically transparent µECoG grids acutely placed on the thinned skull. Finally, spatially distinct electrophysiological recordings were evident on µECoG electrodes placed on a thinned skull separated by 500-750 µm, as assessed by stimulation evoked responses using optogenetic activation of cortex as well as invasive and epidermal stimulation of the sciatic and median nerve at chronic time points. Neural signals were collected through a thinned skull in mice and rats, demonstrating potential utility in neuroscience research applications such as in vivo imaging and optogenetics.
ABSTRACT
OBJECTIVE: Electrocorticography (ECoG) is commonly used to map epileptic foci and to implement brain-computer interfaces. Understanding the spatiotemporal correspondence between potentials recorded from the brain's surface and the firing patterns of neurons within the cortex would inform the interpretation of ECoG signals and the design of (microfabricated) micro-ECoG electrode arrays. Based on the theory that synaptic potentials generated by neurons firing in synchrony superimpose to generate local field potentials (LFPs), we hypothesized that neurons in the cortex would fire at preferential phases of the micro-ECoG signal in a spatially dependent way. APPROACH: We custom fabricated micro-ECoG electrode arrays with a small opening for silicon arrays (NeuroNexus) to be inserted into the cortex. MAIN RESULTS: We found that the spectral coherence between micro-ECoG signals and intracortical LFPs decreased with distance and frequency, but the coherence with spiking units did not simply decrease over distance, likely due to the structure of the cortex. The majority of sorted units spiked during a preferred phase (usually downward) and frequency (usually below 20 Hz) of the micro-ECoG signal. Their preferred frequency decreased with administration of dexmeditomidine, a sedative commonly used for cortical mapping in patients with epilepsy prior to surgical resection. Dexmedetomidine concomitantly shifted the micro-ECoG spectral density towards lower frequencies. Therefore, the phase relationship between micro-ECoG signals and cortical spiking depends on the state of the brain, and spectrum shifts towards lower frequencies in the electrocorticography signal are a signature of increased spike-phase coupling. However, spike-phase coupling is not a static property since visual stimuli were found to modulate the magnitude of phase coupling at gamma frequency ranges (30-80 Hz), providing empirical evidence that neurons transiently phase-lock. SIGNIFICANCE: The phase relationship between intracortical spikes and micro-ECoG signals depends on brain state, site separation, cortical structure, and external stimuli.
Subject(s)
Action Potentials/physiology , Cerebral Cortex/physiology , Electrocorticography/methods , Electrodes, Implanted , Neurons/physiology , Animals , Electrocorticography/instrumentation , Male , Microelectrodes , Rats , Rats, Sprague-DawleyABSTRACT
We present a new class of carbon-based neural probes that consist of homogeneous glassy carbon (GC) microelectrodes, interconnects and bump pads. These electrodes have purely capacitive behavior with exceptionally high charge storage capacity (CSC) and are capable of sustaining more than 3.5 billion cycles of bi-phasic pulses at charge density of 0.25 mC/cm2. These probes enable both high SNR (>16) electrical signal recording and remarkably high-resolution real-time neurotransmitter detection, on the same platform. Leveraging a new 2-step, double-sided pattern transfer method for GC structures, these probes allow extended long-term electrical stimulation with no electrode material corrosion. Cross-section characterization through FIB and SEM imaging demonstrate strong attachment enabled by hydroxyl and carbonyl covalent bonds between GC microstructures and top insulating and bottom substrate layers. Extensive in-vivo and in-vitro tests confirmed: (i) high SNR (>16) recordings, (ii) highest reported CSC for non-coated neural probe (61.4 ± 6.9 mC/cm2), (iii) high-resolution dopamine detection (10 nM level - one of the lowest reported so far), (iv) recording of both electrical and electrochemical signals, and (v) no failure after 3.5 billion cycles of pulses. Therefore, these probes offer a compelling multi-modal platform for long-term applications of neural probe technology in both experimental and clinical neuroscience.
Subject(s)
Brain/physiology , Carbon/chemistry , Dopamine/analysis , Electric Stimulation/instrumentation , Neurotransmitter Agents/analysis , Animals , Brain/cytology , Brain Chemistry , Dopamine/metabolism , Electrodes, Implanted , Equipment Design , Female , Microelectrodes , Neurotransmitter Agents/metabolism , Rats, Long-EvansABSTRACT
Micro-electrocorticograph (µECoG) arrays offer the flexibility to record local field potentials (LFPs) from the surface of the cortex, using high density electrodes that are sub-mm in diameter. Research to date has not provided conclusive evidence for the underlying signal generation of µECoG recorded LFPs, or if µECoG arrays can capture network activity from the cortex. We studied the pervading view of the LFP signal by exploring the spatial scale at which the LFP can be considered elemental. We investigated the underlying signal generation and ability to capture functional networks by implanting, µECoG arrays to record sensory-evoked potentials in four rats. The organization of the sensory cortex was studied by analyzing the sensory-evoked potentials with two distinct modeling techniques: (1) The volume conduction model, that models the electrode LFPs with an electrostatic representation, generated by a single cortical generator, and (2) the dynamic causal model (DCM), that models the electrode LFPs with a network model, whose activity is generated by multiple interacting cortical sources. The volume conduction approach modeled activity from electrodes separated < 1000 µm, with reasonable accuracy but a network model like DCM was required to accurately capture activity > 1500 µm. The extrinsic network component in DCM was determined to be essential for accurate modeling of observed potentials. These results all point to the presence of a sensory network, and that µECoG arrays are able to capture network activity in the neocortex. The estimated DCM network models the functional organization of the cortex, as signal generators for the µECoG recorded LFPs, and provides hypothesis-testing tools to explore the brain.
Subject(s)
Brain Mapping/methods , Evoked Potentials, Somatosensory/physiology , Models, Neurological , Somatosensory Cortex/physiology , Animals , Electrocorticography , RatsABSTRACT
Transparent graphene-based neural electrode arrays provide unique opportunities for simultaneous investigation of electrophysiology, various neural imaging modalities, and optogenetics. Graphene electrodes have previously demonstrated greater broad-wavelength transmittance (â¼90%) than other transparent materials such as indium tin oxide (â¼80%) and ultrathin metals (â¼60%). This protocol describes how to fabricate and implant a graphene-based microelectrocorticography (µECoG) electrode array and subsequently use this alongside electrophysiology, fluorescence microscopy, optical coherence tomography (OCT), and optogenetics. Further applications, such as transparent penetrating electrode arrays, multi-electrode electroretinography, and electromyography, are also viable with this technology. The procedures described herein, from the material characterization methods to the optogenetic experiments, can be completed within 3-4 weeks by an experienced graduate student. These protocols should help to expand the boundaries of neurophysiological experimentation, enabling analytical methods that were previously unachievable using opaque metal-based electrode arrays.
Subject(s)
Electrodes, Implanted , Electrophysiology/instrumentation , Graphite , Molecular Imaging/instrumentation , Optogenetics/instrumentation , Animals , Electrodes , Equipment Design , Mice , Rats , Tin Compounds/chemistryABSTRACT
Neural micro-electrode arrays that are transparent over a broad wavelength spectrum from ultraviolet to infrared could allow for simultaneous electrophysiology and optical imaging, as well as optogenetic modulation of the underlying brain tissue. The long-term biocompatibility and reliability of neural micro-electrodes also require their mechanical flexibility and compliance with soft tissues. Here we present a graphene-based, carbon-layered electrode array (CLEAR) device, which can be implanted on the brain surface in rodents for high-resolution neurophysiological recording. We characterize optical transparency of the device at >90% transmission over the ultraviolet to infrared spectrum and demonstrate its utility through optical interface experiments that use this broad spectrum transparency. These include optogenetic activation of focal cortical areas directly beneath electrodes, in vivo imaging of the cortical vasculature via fluorescence microscopy and 3D optical coherence tomography. This study demonstrates an array of interfacing abilities of the CLEAR device and its utility for neural applications.
Subject(s)
Carbon/chemistry , Graphite/chemistry , Neuroimaging/instrumentation , Optogenetics/instrumentation , Animals , Artifacts , Biocompatible Materials/chemistry , Electrodes , Equipment Design , Female , Imaging, Three-Dimensional , Male , Mice , Microscopy, Fluorescence , Optics and Photonics , Rats , Rats, Sprague-Dawley , Silicon/chemistry , Tomography, Optical CoherenceABSTRACT
PURPOSE: It has been known for several decades that the magnitude of the corneal electroretinogram (ERG) varies with position on the eye surface, especially in the presence of focal or asymmetric stimuli or retinal lesions. However, this phenomenon has not been well-characterized using simultaneous measurements at multiple locations on the cornea. This work provides the first characterization of spatial differences in the ERG across the rat cornea. METHODS: A contact lens electrode array was employed to record ERG potentials at 25 corneal locations simultaneously following brief full-field flash stimuli in normally sighted Long-Evans rats. These multi-electrode electroretinogram (meERG) responses were analyzed for spatial differences in a-wave and b-wave amplitudes and implicit times. RESULTS: Spatially distinct ERG potentials could be recorded reliably. Comparing relative amplitudes across the corneal locations suggested a slight non-uniform distribution when using full-field, near-saturating stimuli. Amplitudes of a- and b-waves were approximately 3 % lower in the inferior quadrant than in the superior quadrant of the cornea. CONCLUSIONS: The present results comprise the start of the first normative meERG database for rat eyes and provide a basis for comparison of results from eyes with functional deficit. Robust measures of spatial differences in corneal potentials will also support optimization and validation of computational source models of the ERG. To fully utilize the information contained in the meERG data, a detailed understanding of the roles of the many determinants of local corneal potentials will eventually be required.
Subject(s)
Cornea/physiology , Electrodes , Electroretinography/methods , Membrane Potentials/physiology , Animals , Contact Lenses , Male , Photic Stimulation , Rats , Rats, Long-EvansABSTRACT
OBJECTIVE: There is great interest in designing implantable neural electrode arrays that maximize function while minimizing tissue effects and damage. Although it has been shown that substrate geometry plays a key role in the tissue response to intracortically implanted, penetrating neural interfaces, there has been minimal investigation into the effect of substrate footprint on the tissue response to surface electrode arrays. This study investigates the effect of micro-electrocorticography (micro-ECoG) device geometry on the longitudinal tissue response. APPROACH: The meningeal tissue response to two micro-ECoG devices with differing geometries was evaluated. The first device had each electrode site and trace individually insulated, with open regions in between, while the second device had a solid substrate, in which all 16 electrode sites were embedded in a continuous insulating sheet. These devices were implanted bilaterally in rats, beneath cranial windows, through which the meningeal tissue response was monitored for one month after implantation. Electrode site impedance spectra were also monitored during the implantation period. MAIN RESULTS: It was observed that collagenous scar tissue formed around both types of devices. However, the distribution of the tissue growth was different between the two array designs. The mesh devices experienced thick tissue growth between the device and the cranial window, and minimal tissue growth between the device and the brain, while the solid device showed the opposite effect, with thick tissue forming between the brain and the electrode sites. SIGNIFICANCE: These data suggest that an open architecture device would be more ideal for neural recording applications, in which a low impedance path from the brain to the electrode sites is critical for maximum recording quality.
Subject(s)
Electroencephalography/instrumentation , Meninges/physiology , Neural Prostheses/adverse effects , Animals , Cicatrix/pathology , Dura Mater/pathology , Electrodes, Implanted , Male , Microelectrodes , Neuroimaging , Prosthesis Design , Prosthesis Implantation , Rats , Rats, Sprague-DawleyABSTRACT
OBJECTIVE: Spatial localization of neural activity from within the brain with electrocorticography (ECoG) and electroencephalography remains a challenge in clinical and research settings, and while microfabricated ECoG (micro-ECoG) array technology continues to improve, complementary methods to simultaneously modulate cortical activity while recording are needed. APPROACH: We developed a neural interface utilizing optogenetics, cranial windowing, and micro-ECoG arrays fabricated on a transparent polymer. This approach enabled us to directly modulate neural activity at known locations around micro-ECoG arrays in mice expressing Channelrhodopsin-2. We applied photostimuli varying in time, space and frequency to the cortical surface, and we targeted multiple depths within the cortex using an optical fiber while recording micro-ECoG signals. MAIN RESULTS: Negative potentials of up to 1.5 mV were evoked by photostimuli applied to the entire cortical window, while focally applied photostimuli evoked spatially localized micro-ECoG potentials. Two simultaneously applied focal stimuli could be separated, depending on the distance between them. Photostimuli applied within the cortex with an optical fiber evoked more complex micro-ECoG potentials with multiple positive and negative peaks whose relative amplitudes depended on the depth of the fiber. SIGNIFICANCE: Optogenetic ECoG has potential applications in the study of epilepsy, cortical dynamics, and neuroprostheses.
Subject(s)
Brain-Computer Interfaces , Cerebral Cortex/physiology , Electroencephalography/methods , Optogenetics/methods , Animals , Channelrhodopsins , Coated Materials, Biocompatible , Electrodes, Implanted , Evoked Potentials/physiology , Fiber Optic Technology , Humans , Imides , Lasers , Mice , Photic Stimulation , Polymers , Prosthesis Design , Signal Processing, Computer-Assisted , Stereotaxic Techniques , XylenesABSTRACT
Micro-electrocorticography (µECoG) displays advantages over traditional invasive methods. The µECoG electrode can record neural activity with high spatial-temporal resolution and it can reduce implantation side effects (e.g. vascular and local-neuronal damage, tissue encapsulation, infection). In this study, we propose a printable transparent µECoG electrode for optogenetic applications by using ultrasonic microfluid printing technique. The device is based on poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) as a conductive polymer, polydimethylsiloxane (PDMS) as an insulating polymer and poly(chloro-para-xylylene) (Parylene-C) as the device substrate. We focus on ultrasonic microfluid printing due to its low production cost, excellent material handling capability, and its customizable film thickness (down to 5-20 microns). The ultrasonic fluid-printed µECoG displays high spatial resolution and records simulated signal (0-200 Hz sine wave) effectively with low electrode impedance (50-200 kOhms@1kHz). The µECoG also shows good biocompatibility suitable for customizable chronic implants. This new neural interfacing device could be combined with optogenetics and Brain-Computer Interface (BCI) applications for a possible future use in neurological disease diagnosis and rehabilitations.
Subject(s)
Electrocorticography/instrumentation , Optogenetics/instrumentation , Electrodes , Equipment Design , PrintingABSTRACT
Implantable neural micro-electrode arrays have the potential to restore lost sensory or motor function to many different areas of the body. However, the invasiveness of these implants often results in scar tissue formation, which can have detrimental effects on recorded signal quality and longevity. Traditional histological techniques can be employed to study the tissue reaction to implanted micro-electrode arrays, but these techniques require removal of the brain from the skull, often causing damage to the meninges and cortical surface. This is especially unfavorable when studying the tissue response to electrode arrays such as the micro-electrocorticography (micro-ECoG) device, which sits on the surface of the cerebral cortex. In order to better understand the biological changes occurring around these types of devices, a cranial window implantation scheme has been developed, through which the tissue response can be studied in vivo over the entire implantation period. Rats were implanted with epidural micro-ECoG arrays, over which glass coverslips were placed and sealed to the skull, creating cranial windows. Vascular growth around the devices was monitored for one month after implantation. It was found that blood vessels grew through holes in the micro-ECoG substrate, spreading over the top of the device. Micro-hematomas were observed at varying time points after device implantation in every animal, and tissue growth between the micro-ECoG array and the window occurred in several cases. Use of the cranial window imaging technique with these devices enabled the observation of tissue changes that would normally go unnoticed with a standard device implantation scheme.