Evaluation of Emulgel and Nanostructured Lipid Carrier-Based Gel Formulations for Transdermal Administration of Ibuprofen: Characterization, Mechanical Properties, and Ex-Vivo Skin Permeation.

In transdermal applications of nonsteroidal anti-inflammatory drugs, the rheological and mechanical properties of the dosage form affect the performance of the drug. The aim of this study to develop emulgel and nanostructured lipid carrier NLC-based gel formulations containing ibuprofen, evaluate their mechanical properties, bioadhesive value and ex-vivo rabbit skin permeability. All formulations showed non-Newtonian pseudoplastic behavior and their viscosity values are suitable for topical application. The particle size of the nanostructured lipid carrier system was found to be 468 ± 21 nm, and the encapsulation efficiency was 95.58 ± 0.41%. According to the index of viscosity, consistency, firmness, and cohesiveness values obtained as a result of the back extrusion study, E2 formulation was found to be more suitable for transdermal application. The firmness and work of shear values of the E2 formulation, which has the highest viscosity value, were also found to be the highest and it was chosen as the most suitable formulation in terms of the spreadability test. The work of bioadhesion values of NLC-based gel and IBU-loaded NLC-based gel were found as 0.226 ± 0.028 and 0.181 ± 0.006 mJ/cm2 respectively. The percentages of IBU that penetrated through rabbit skin from the Ibuactive-Cream and the E2 were 87.4 ± 2.11% and 93.4 ± 2.72% after 24 h, respectively. When the penetration of ibuprofen through the skin was evaluated, it was found that the E2 formulation increased penetration due to its lipid and nanoparticle structure. As a result of these findings, it can be said that the NLC-based gel formulation will increase the therapeutic efficacy and will be a good alternative transdermal formulation.

Three-dimensional printed dosage forms based on disease-focussed perspectives.

OBJECTIVES: Three-dimensional printing (3DP) has gained importance worldwide recently as a novel drug manufacturing technology. 3DP technologies are suitable in the pharmaceutical field because of having the potential in personalized medicine. The aim of this review is to present an overview of the use of 3DP technologies in pharmaceutical area, their working principles and critical process parameters. In addition, this review presents an innovative approach that evaluates the use of 3DP technologies on disease to disease. KEY FINDINGS: This review covers the potential use of 3DP technologies in different diseases by evaluating them on a research basis. These diseases can be summarized as cardiovascular, neurological, respiratory, oncological, inflammatory, vaginal, dermatological and other diseases. It has been focussed on manuscripts that published after 2015. Studies on the use of 3DP in each disease group have been systematically reviewed by considering the methods, types of printers used and the prepared dosage forms. Oral formulations (tablets and films), implants, topical systems and vaccines are some of the examples of the mentioned dosage forms. SUMMARY: This review presented a systematic and novel overview of the use of 3DP in the treatment of different clinical disorders.

Development and characterization of chitosan nanoparticles loaded nanofiber hybrid system for vaginal controlled release of benzydamine.

Vaginal infections caused by various pathogens such as fungi, viruses and protozoa are frequently seen. Systemic and local treatments can be applied to eliminate these infections. Novel vaginal drug delivery systems can be used to provide local treatment. Vaginal drug delivery systems prevent systemic side effects and can provide long-term drug release in the vaginal area. Nanofibers and nanoparticles have a wide range of applications and can also be preferred as vaginal drug delivery systems. Benzydamine is a non-steroidal anti-inflammatory and antiseptic drug which is used for treatment of vaginal infections. The aim of this study was to compare the nanofiber and gel formulations containing lyophilized benzydamine nanoparticles with nanofiber and gel formulations containing free benzydamine, and to provide prolonged release for protection from the vaginal infections. Ionic gelation method was used for the preparation of benzydamine loaded nanoparticles. To produce benzydamine nanoparticles loaded nanofiber formulations, polyvinylpyrrolidone (PVP) solutions were prepared at 10% concentrations and mixed with nanoparticles. Hydroxypropyl methylcellulose (HPMC) was used as a gelling agent at the concentration of 1% for the vaginal gel formulation. Nanoparticles were characterized in terms of zeta potential, polydispersity index and particle size. Viscosity, surface tension and conductivity values of the polymer solutions were measured for the electrospinning. Mechanical properties, contact angle and drug loading capacity of the fibers were determined. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), fourier-transform infrared (FT-IR) spectroscopy, mucoadhesion, ex vivo permeability studies and in vitro release studies were performed for the selected formulations. Ex vivo permeability studies were performed using Franz diffusion cell method. SEM and TEM images showed that fiber diameters increased with loading of nanoparticles. DSC studies showed no interaction between excipients used in the formulation. Tensile strength and elongation at break values of the fibers increased with the loading of nanoparticles, and the contact angle values of the fibers were found to be 0°. Addition of benzydamine nanoparticles to gel and nanofiber formulations increased mucoadhesion compared to free benzydamine loading formulations. Benzydamine nanoparticle loaded gel and nanofiber formulations penetrated slower than that of free benzydamine gel and fiber formulations. The results demonstrated that benzydamine and benzydamine nanoparticle loaded fibers and gels could be a potential drug delivery system for the treatment of vaginal infections. Chitosan nanoparticle loaded nanofiber formulations are offered as an alternative controlled release vaginal formulations for vaginal infections.

3D printed extended release tablets for once daily use: An in vitro and in vivo evaluation study for a personalized solid dosage form.

Fused deposition modeling (FDM)-3D printing enables the manufacturing of dosage forms with personalized doses and controllable release profiles. Parkinson's disease is a neurodegenerative disorder that causes motor complications. In the treatment of the disease, the nonergot dopamine receptor agonist pramipexole is used in gradually increasing doses depending on patient's needs. Hence, there are various dosed commercial products of pramipexole and it is a suitable model drug for the preparation of personalized-dose 3D printed dosage forms. In this study, we prepared extended release 3D tablets of pramipexole for once daily use in Parkinson's disease. Herein, 12 different 3D tablet formulations were prepared and in vitro characterizations were performed on these formulations. The formulations were compared with the marketed tablet and the optimum formulation was selected. The chosen formulation was prepared with commercially available doses of pramipexole and also with intermediate doses which are not available in the market to demonstrate the applicability of 3D printing in personalized dosing. Stability studies, which have innovative features for 3D tablets, were conducted in optimum 3D tablet formulation for 6 months at 25 °C/60% relative humidity (RH) and 40 °C/75% RH conditions. After oral administration of the optimum 3D tablets and the marketed tablets (in the same dose) to the rats, 24-hour plasma profiles were obtained and pharmacokinetic parameters were calculated. 3D tablets were successfully prepared in personalized doses and their properties were similar for almost all doses. The optimum 3D tablet formulation was found to be stable during the stability tests. 3D tablet and marketed tablet performed similar plasma profiles. The relative bioavailability of 3D tablet formulation was calculated as 107.6% compared with the marketed tablet. Briefly, in vitro and in vivo evaluations demonstrated that FDM-3D printing is a promising technology for the development of personalized dosage forms with extended release property and comparable to conventional ones.

Electrospun metronidazole-loaded nanofibers for vaginal drug delivery.

Objective: To develop and characterize innovative vaginal dosage forms for the treatment of bacterial vaginosis (BV).Significance: This study is the first comparative evaluation of the metronidazole (MET)-loaded polyvinylpyrrolidone (PVP) nanofiber formulations on BV treatment. Vaginal nanofibers are one of the potential innovative dosage forms for BV treatment because of their flexible, mucoadhesive, and easy application in vaginal application which can be applied by the mucosal route.Methods: Blank and MET-loaded PVP solutions were prepared at three different concentrations (10, 12.5, 15%) for produce nanofiber. The suitability of the viscosities, surface tensions, and conductivity values of the solutions used to produce nanofibers for the electrospinning process has been evaluated. Scanning electron microscopy, mucoadhesion, permeability, Fourier transform infrared spectroscopy, differential scanning calorimetry, and drug release tests were performed to reveal the physical, chemical, and pharmaceutical properties of the nanofibers. Mechanical properties, and contact angle of the fibers were also determined. Gel and solution formulations containing MET were prepared for comparative studies.Results: All polymer solutions were found to be suitable for electrospinning process. PVP concentration directly affected nanofiber diameter, mechanical, and mucoadhesion properties of nanofibers. The release profiles of the drug from the nanofibers were similar for all concentration of PVP and release from the fibers was rapid. The permeability coefficient of MET from nanofibers was increased more than gel and solution formulations.Conclusions: Vaginal use of MET-loaded nanofibers has been shown to be a potential drug delivery system for the treatment of BV.

Development and characterization of rapid dissolving ornidazole loaded PVP electrospun fibers.

Gingivitis is a common and mild form of periodontal disease and can be described as a limited inflammation of the gingiva. This study aims to develop and characterize rapid releasing mucoadhesive fibers containing ornidazole with electrospinning process for the treatment of gingivitis. Polyvinylpyrrolidone (PVP) was chosen as a polymer and used at different concentrations of 10%, 12.5%, and 15%. Scanning electron microscopy images showed that fiber diameters increased with increasing polymer concentrations. Tensile strength and elongation at break values of fibers increased with increasing PVP amount, whereas the loading of ornidazole into the fibers decreased these parameters. The contact angle values of all fibers were found to be 0° due to the hydrophilic nature of PVP. Ornidazole was released within 5 min and diffused from all of the fibers faster than that of gel and solution formulations. Electrospun ornidazole fibers were found efficient against Porphyromonas gingivalis in antimicrobial activity studies. The results demonstrated that ornidazole loaded fibers could be a potential drug delivery system for the treatment of gingivitis.

Comparison of Oxidative Effects of Two Different Administration Form of Oxybutynin in the Potential Target Tissues.

Oxybutynin is an important anticholinergic agent that prevents uncontrolled contractions in the treatment of overactive bladder (OAB). However, drugs containing oxybutynin have significant side effects such as dry eyes, dry mouth, increased heart rate, constipation, blurred vision, and confusion. In recent years, new delivery methods for this agent are being searched. One of them is vaginal delivery. In this study, we aimed to compare the effects of oxybutynin on oxidative parameters in the potential target tissues of the oral and vaginal delivery. Female New Zealand white rabbits (n=12) were divided into two groups: oral delivery and vaginal delivery. The animals were sacrificed 48 h after administration and nitric oxide (NOx), thiobarbituric acid-reactive substances (TBARs), and glutathione (GSH) levels were determined spectrophotometrically in the aorta, salivary gland, and small intestine tissue samples. Vaginal delivery significantly decreased NOx levels in all tissue samples as compared to oral delivery (p < 0.05). Moreover, it reduced TBARs levels in salivary gland and aorta tissue samples (p < 0.05). In the light on these findings, it can be said that vaginal delivery may decrease the oxidant-induced side effects of oxybutynin as compared to oral delivery.

Vaginal Delivery of Benzydamine Hydrochloride through Liposomes Dispersed in Mucoadhesive Gels.

Liposomal vaginal drug delivery systems are important strategy in the treatment of both topical and systemic diseases. The aim of this study was to develop a vaginal delivery system for benzydamine hydrochloride (BNZ) loaded liposomes dispersed into mucoadhesive gels. The delivery system was also designed for a once a day dosage and to obtain controlled release of the BNZ. For this purpose BNZ containing gel formulations using hydroxypropyl methylcellulose (HPMC) K100M and Carbopol® 974P, which are composed of polymers that show promising potential as mucoadhesive vaginal delivery systems, were developed. In addition, a BNZ containing liposome formulation was developed for vaginal administration. To improve the vaginal retention time, liposome was incorporated in HPMC K100M and Carbopol® 974P gel formulations. This system is called lipogel. The developed BNZ liposomes have a slightly negative zeta potential (-1.50±0.16 mV), a 2.25±0.009 µm particle size and a 34% entrapment efficiency. These gels and lipogels have appropriate pH, viscosity, textural properties and mucoadhesive value for vaginal administration. Lipogels were found to be the best formulations for in vitro diffusion and ex vivo mucoadhesion. The work of mucoadhesion obtained from liposomes was in the range of 0.027±0.045 and 0.030±0.017 mJ/cm2, while the value obtained from lipogels was between 0.176±0.037 and 0.243±0.53 mJ/cm2. N1 and N2 lipogel formulations diffused 57 and 67% of BNZ respectively at the end of 24 h. Moreover, a higher mucoadhesion, which increases drug residence time in comparison to liposomes, could improve BNZ efficacy. In conclusion, BNZ mucoadhesive vaginal lipogel formulations can be promising alternatives to traditional dosage forms for vaginal topical therapy.

Carbon nanotube membranes to predict skin permeability of compounds.

In the present study, carbon nanotube (CNT) membranes were prepared to predict skin penetration properties of compounds. A series of penetration experiments using Franz diffusion cells were performed with 16 different membrane compositions for model chemicals. Similar experiments were also carried out with same model molecules using five different commercially available synthetic membranes and human skins for the comparison. Model chemicals were selected as diclofenac, dexketoprofen and salicylic acid. Their permeability coefficients and flux values were calculated. Correlations between permeability values of model compounds for human skins and developed model membranes were investigated. Good correlations were obtained for CNT membrane, isopropyl myristate-treated CNT membrane (IM-CNT membrane) and bovine serum albumin-cholesterol, dipalmitoyl phosphatidyl choline-treated membrane (BSA-Cholesterol-DPPC-IM-CNT membrane). An artificial neural network (ANN) model was developed using some molecular properties and penetration coefficients from pristine CNT membranes to predict skin permeability values and quite good predictions were made.

Stimuli-responsive lipid nanotubes in gel formulations for the delivery of doxorubicin.

Lipid nanotubes (LNTs) are one of the most advantageous structures for drug delivery and targeting. LNTs formed by a specially designed molecule called AQUA (AQ-NH-(CH2)10COOH (AQ: anthraquinone group) is used for drug delivery, and doxorubicin (DOX) is the drug selected. DOX and AQUA have some similarities in their molecular structures, so a significant amount of DOX can be loaded to LNTs. The AQUA LNTs are pH responsive, and drug loading increased almost linearly by increasing the pH, reaching a maximum value (96%) at pH 9.0. In terms of drug release, lower pHs are preferred. Drug-loaded LNTs are also mixed with four different gels (chitosan, alginate, hydroxypropyl methylcellulose and polycarbophil) to use the advantages of these gels. The drug release efficiency is studied using a Franz diffusion cell in which sheep colon membranes and dialysis membranes are utilized. The amount of released DOX from the chitosan gel formulations was quite high. Sodium alginate gels had lower release and slower diffusion of DOX. The cytotoxic effect of DOX-loaded AQUA LNTs has also been determined on cell cultures. Our new lipid nanotubes are a non-toxic, effective, biodegradable, biocompatible, stable and promising system for drug delivery and can be used for colonic administration of DOX for the treatment of colorectal cancer (CRC).

Investigation of the effect of intracolonic melatonin gel formulation on acetic acid-induced colitis.

The aims of the present study were to develop a colon-specific gel formulation of melatonin with sodium alginate and to evaluate its in vitro characteristics and intracolonic performance on oxidative stress parameters, such as nitric oxide (NOx), malondialdehyde (MDA) and glutathione (GSH) levels in rats with acetic acid-induced colitis. The melatonin-alginate gel formulations were prepared and their physico-pharmaceutical properties were determined. Formulation M5, which contained 3% of sodium alginate and 20% polyethylene glycol, was used for in vivo studies. The in vivo studies were conducted in rats with acetic acid-induced colitis. NOx, MDA and GSH levels were determined and histological investigations were performed. It was found that formulation M5 was the most suitable formulation for the colon-specific melatonin gel, in terms of pH, viscosity, drug release and mucoadhesion properties. The MDA levels in the tissues of Group 2 (treated with an intracolonic gel formulation without melatonin) were found to be significantly higher than in Group 1 (the untreated group). NOx levels decreased with the intracolonic and systemic melatonin treatment in the colitis-induced rats. Neither intracolonic nor intra-peritoneal (IP) melatonin treatment affected GSH levels. The epitelization of the colon tissues in groups administered with intracolonic melatonin, IP melatonin, and the intracolonic gel formulation without melatonin was much better than that found in the untreated group. It was concluded that melatonin participated in various defense mechanisms against the colonic inflammatory process, and that the dose, route and formulation type were the most important parameters in the effectiveness of melatonin.

Quantitative Characterization of Magnetic Mobility of Nanoparticle in Solution-Based Condition.

Magnetic nanoparticles are considered as the ideal substrate to selectively isolate target molecules or organisms from sample solutions in a wide variety of applications including bioassays, bioimaging and environmental chemistry. The broad array of these applications in fields requires the accurate magnetic characterization of nanoparticles for a variety of solution based-conditions. Because the freshly synthesized magnetic nanoparticles demonstrated a perfect magnetization value in solid form, they exhibited a different magnetic behavior in solution. Here, we present simple quantitative method for the measurement of magnetic mobility of nanoparticles in solution-based condition. Magnetic mobility of the nanoparticles was quantified with initial mobility of the particles using UV-vis absorbance spectroscopy in water, ethanol and MES buffer. We demonstrated the efficacy of this method through a systematic characterization of four different core-shell structures magnetic nanoparticles over three different surface modifications. The solid nanoparticles were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD) and saturation magnetization (Ms). The surfaces of the nanoparticles were functionalized with 11-mercaptoundecanoic acid and bovine serum albumin BSA was selected as biomaterial. The effect of the surface modification and solution media on the stability of the nanoparticles was monitored by zeta potentials and hydrodynamic diameters of the nanoparticles. Results obtained from the mobility experiments indicate that the initial mobility was altered with solution media, surface functionalization, size and shape of the magnetic nanoparticle. The proposed method easily determines the interactions between the magnetic nanoparticles and their surrounding biological media, the magnetophoretic responsiveness of nanoparticles and the initial mobilities of the nanoparticles.

Preparation and characterization of bioadhesive controlled-release gels of cidofovir for vaginal delivery.

The aim of this study was to develop mucoadhesive and thermosensitive gels for vaginal delivery that would be able to provide a controlled release of the model drug, cidofovir. The study also monitored the drug's potential antiviral properties. Cidofovir was put into the form of a vaginal gel, using mucoadhesive and thermosensitive polymers such as chitosan, Carbopol 974P, HPMC, and poloxamer 407. The physicopharmaceutical properties and stability of the vaginal gel formulations were evaluated. The gel formulation which was prepared with HPMC K100M exhibited the highest viscosity, as well as maximum adhesiveness, cohesiveness, and mucoadhesion values. The results of antiviral activity studies, which used the bovine herpes virus type 1 virus infection in vitro model using Vero cells, demonstrated the antiherpetic effect of the cidofovir gel containing HPMC K100M, at least under in vitro conditions. The study found that a mucoadhesive vaginal gel containing cidofovir can be a promising and innovative alternative therapeutic system for the treatment of genital herpes simplex virus and human papilloma virus induced infections in women.

Validation of phenol red versus gravimetric method for water reabsorption correction and study of gender differences in Doluisio's absorption technique.

The aim of the present study was to develop a method for water flux reabsorption measurement in Doluisio's Perfusion Technique based on the use of phenol red as a non-absorbable marker and to validate it by comparison with gravimetric procedure. The compounds selected for the study were metoprolol, atenolol, cimetidine and cefadroxil in order to include low, intermediate and high permeability drugs absorbed by passive diffusion and by carrier mediated mechanism. The intestinal permeabilities (Peff) of the drugs were obtained in male and female Wistar rats and calculated using both methods of water flux correction. The absorption rate coefficients of all the assayed compounds did not show statistically significant differences between male and female rats consequently all the individual values were combined to compare between reabsorption methods. The absorption rate coefficients and permeability values did not show statistically significant differences between the two strategies of concentration correction. The apparent zero order water absorption coefficients were also similar in both correction procedures. In conclusion gravimetric and phenol red method for water reabsorption correction are accurate and interchangeable for permeability estimation in closed loop perfusion method.

Development of long-acting bioadhesive vaginal gels of oxybutynin: formulation, in vitro and in vivo evaluations.

Overactive bladder (OAB) and vaginal dryness are common problems after menopause. Oxybutynin (OXY) is an antimuscarinic agent that has been available for more than 30 years in the treatment of OAB patients. The aim of the work reported in this paper was to develop long acting mucoadhesive gel formulations of OXY and to investigate their effects on blood levels compared to those of oral OXY immediate release tablets, in rabbits. Mucoadhesive gels were prepared with chitosan, hydroxypropyl methylcellulose (HPMC K100M) and Poloxamer 407 (Pluronic F 127). The physicopharmaceutical properties of gels were evaluated. The gel formulation which was prepared with HPMC K100M, exhibited the highest viscosity, the greatest adhesiveness, cohesiveness and mucoadhesion values. The formulation which was prepared from HPMC K100M showed suitable permeation characteristics across the vaginal mucosa. Comparative bioavailability studies were carried out on rabbits with vaginal HPMC gel, vaginal chitosan gel, vaginal OXY solution and commercially available oral Üropan tablets. It was concluded that the highest AUC and relative bioavailability values were obtained for the bioadhesive vaginal gel formulation prepared with HPMC K100M. Therefore, the mucoadhesive vaginal gels of OXY can be a promising and innovative alternative therapeutic system for the treatment of OAB. It can be safely used in cases of overactive bladder and as well as vaginal dryness after menopause.

PDGF supplementation alters oxidative events in wound healing process: a time course study.

Platelet-derived growth factor (PDGF), an important stimulant, plays a role in almost all stages of wound healing process. In various studies, it has been shown that PDGF has healing effects in this process. In the present study, we especially focused on investigating the effects of exogenous PDGF administration on oxidative events during cutaneous wound healing process. Experiments were performed on 42 female Wistar-albino rats. Animals were divided into four groups: control, untreated, chitosan-treated and chitosan + PDGF-treated. Two uniform full-thickness excisional skin wounds were made under anesthesia in all animals except control group. In the chitosan + PDGF-treated groups, the wounds were treated topically with a single daily dose PDGF-BB (7 ng/ml) after wounding. In the chitosan-treated groups, the wounds were treated topically with equal amount of blank chitosan gel. After that, on the 3rd and 7th days of wound healing, the animals were killed. Thiobarbituric acid-reactive substances (TBARS), nitric oxide (NOx), ascorbic acid (AA), glutathione (GSH) levels and superoxide dismutase (SOD) activity were measured spectrophotometrically in the wound tissues. PDGF significantly increased TBARS levels in early phase of wound healing. In contrast, it significantly decreased TBARS levels in later phase of healing. In the chitosan + PDGF-treated group, NOx levels decreased on days 3 and 7 when compared with the chitosan-treated groups. Non-enzymatic antioxidant levels were increased by PDGF administration and this may have contributed to increase in wound tissue antioxidant capacity. In the light of these findings, PDGF supplementation may have altering effects on oxidative events depending on the time in wound healing process.

Development of controlled release sildenafil formulations for vaginal administration.

Sildenafil is an active substance that has already been approved by FDA for human use. It is known to be an active compound for the treatment of sexual dysfunction in men. Some encouraging results have been published concerning the treatment of infertility with sildenafil in women, but there is no pharmaceutical preparation available. Therefore, various formulations were prepared and the most suitable sildenafil release was found to be with the sildenafil-containing suppositories prepared using Eudragit RS100 and Witepsol H15. The vaginal insert with EVAC 210 polymer containing sildenafil has also provided sildenafil release for a longer period.

Evaluation of alginate based mesalazine tablets for intestinal drug delivery.

The aim of this study was to develop the alginate based mesalazine tablets for intestinal delivery. Sodium alginate is a biocompatible, natural polymer with pH-sensitive gel-forming ability. Matrix tablets were prepared with two types of sodium alginate of different amounts. The in vitro release characteristics of mesalazine from alginate tablets were compared with those of the commercial product (Salofalk). X-ray imaging was used to monitor the tablets throughout the gastrointestinal system. Although alginate tablets gave a faster release in an acidic medium compared with the commercial product (Salofalk), the cumulative amount of released drug of the optimum formulation was found to be almost the same as that of the commercial product at the end of 4 h. The alginate type and amount in the matrices played an important role in basic media. The release of the optimum formulation containing low viscosity alginate was found to be almost identical to that of the commercial product in acidic and basic media. Tablets were visualized to determine whether they were located in the terminal ileum or cecum for 3-6 h. Mesalazine-alginate matrix tablet formulations can deliver the drug to the small and large intestine. Thus, the alginate matrix system may be a promising system for the treatment of Crohn's disease involving both the ileum and large intestine.

In-vitro and in-vivo evaluation of mesalazine-guar gum matrix tablets for colonic drug delivery.

The aim of this study was to develop colon-specific delivery systems for mesalazine (5-ASA) using guar gum as a carrier. A colon specific matrix tablet of mesalazine with guar gum was evaluated by in vitro and in vivo X-ray studies in humans. Two different types of guar gum were used in the experiments. Tablets were prepared by the slugging method. The physical properties of tablets were tested and in vitro release studies were performed by a flow-through cell apparatus with and without galactomannanase enzyme. The type and the amount of guar gum affected the in vitro release of drug from the matrix tablets. High viscosity guar gum, in the form of a matrix tablet was capable of protecting the drug from being released in the upper region of gastrointestinal (GI) system, i.e. stomach and small intestine. X-ray imaging technique was used to monitor the tablets throughout the GI system on 8 healthy volunteers. Barium sulphate was used as a marker in the tablets for in vivo studies. These results showed that, the matrix tablets reached the colon; not being subjected to disintegration in the upper region of the GI system in all the subjects.