ABSTRACT
As an important photovoltaic material, organic-inorganic hybrid perovskites have attracted much attention in the field of solar cells, but their instability is one of the main challenges limiting their commercial application. However, the search for stable perovskites among the thousands of perovskite materials still faces great challenges. In this work, the energy above the convex hull values of organic-inorganic hybrid perovskites was predicted based on four different machine learning algorithms, namely random forest regression (RFR), support vector machine regression (SVR), XGBoost regression, and LightGBM regression, to study the thermodynamic phase stability of organic-inorganic hybrid perovskites. The results show that the LightGBM algorithm has a low prediction error and can effectively capture the key features related to the thermodynamic phase stability of organic-inorganic hybrid perovskites. Meanwhile, the Shapley Additive Explanation (SHAP) method was used to analyze the prediction results based on the LightGBM algorithm. The third ionization energy of the B element is the most critical feature related to the thermodynamic phase stability, and the second key feature is the electron affinity of ions at the X site, which are significantly negatively correlated with the predicted values of energy above the convex hull (Ehull). In the screening of organic-inorganic perovskites with high stability, the third ionization energy of the B element and the electron affinity of ions at the X site is a worthy priority. The results of this study can help us to understand the correlation between the thermodynamic phase stability of organic-inorganic hybrid perovskites and the key features, which can assist with the rapid discovery of highly stable perovskite materials.
ABSTRACT
Addressing the sluggish kinetics in the alkaline hydrogen oxidation reaction (HOR) is a pivotal yet challenging step toward the commercialization of anion-exchange membrane fuel cells (AEMFCs). Here, we have successfully immobilized indium (In) atoms in an orderly fashion into platinum (Pt) nanoparticles supported by reduced graphene oxide (denoted as O-Pt3In/rGO), significantly enhancing alkaline HOR kinetics. We have revealed that the ordered atomic matrix enables uniform and optimized hydrogen binding energy (HBE), hydroxyl binding energy (OHBE), and carbon monoxide binding energy (COBE) across the catalyst. With a mass activity of 2.3066 A mg-1 at an overpotential of 50 mV, over 10 times greater than that of Pt/C, the catalyst also demonstrates admirable CO resistance and stability. Importantly, the AEMFC implementing this catalyst as the anode catalyst has achieved an impressive power output compared to Pt/C. This work not only highlights the significance of constructing ordered oxophilic sites for alkaline HOR but also sheds light on the design of well-structured catalysts for energy conversion.
ABSTRACT
In road engineering, road construction requires a large amount of natural aggregate; its substitution with recycled construction-solid-waste aggregate not only saves resources but also reduces the burden on the environment. The main components of construction solid waste are concrete blocks and brick slag; the breakability of the latter can affect the performance of mixed recycled aggregate, which hinders the use of construction solid waste in road engineering applications. To analyze the applicability of recycled construction-solid-waste aggregate containing brick slag aggregate in the subgrade layer, the effect of brick aggregate content on the CBR (California bearing ratio) and crushing value of mixed recycled aggregates was evaluated based on laboratory tests, and the field compaction quality of the recycled aggregates was analyzed. The results show that the 9.5-19 mm mixed recycled aggregate samples were crushed to a higher degree during the compaction process. A brick aggregate content less than 40% had little effect on the performance of mixed recycled construction-solid-waste aggregate. It is recommended to use a 22 t road roller for five passes (two weak vibrations + two strong vibrations + one weak vibration) at a speed of 3 km/h in the main compaction stage of the subgrade filling.
ABSTRACT
As the span of concrete-filled steel tube (CFST) arch bridges increases, the hydration heat temperature effect of concrete inside steel tube becomes more severe, which increases the safety risk during the construction process. Therefore, a numerical simulation of the mechanical response of a long-span CFST arch bridge under the influence of hydration heat was carried out. First, based on the hydration heat conduction theory, a finite element model of the transient temperature field of a CFST arch rib was established. The temperature distribution of the CFST arch rib and its variation with time were revealed, and an approximate formula for the distribution of the hydration heat temperature along the radial direction of the CFST was provided. Subsequently, the variation law of the thermal stress of a CFST during hydration heat release was investigated. Finally, based on the principle of temperature equivalence, a finite element model of the overall CFST arch rib was established to examine the effect of hydration heat on the deformation of the arch rib. The results reveal that the hydration heat temperature field of the CFST arch rib exhibits nonlinear and axisymmetric characteristics. The maximum temperature of the section and the maximum temperature difference can reach 73.5 °C and 33.2 °C, respectively. Because of the influence of the hydration heat, there is a significant stress gradient in the cross section of the arch rib. A maximum radial stress of 2.08 MPa is attained, indicating a risk of concrete cracking. Additionally, the displacement along the transverse and vertical directions of the chord tube exhibits an initial increase, followed by a decrease over time. The maximum transverse displacement of the chord tube reaches 70.6 mm, while the vertical displacement reaches 117.8 mm.
ABSTRACT
In order to achieve numerical optimization of the pod pepper seed sowing device, the contact parameters of pod pepper seeds were calibrated, with the angle of repose used as the response value. A set of discrete element method (DEM) models of pod pepper seeds was developed to simulate the formation of seed repose angles using reverse engineering reconstruction techniques. An eight-factor, three-level response surface experiment based on the Box-Behnken central combination test method was performed to study the effects of various factors on the angle of repose of seeds. The angle of repose obtained from physical experiments with a value of 27.56° was taken as the target value. The optimal combination of parameters is obtained as follows: seed Poisson's ratio of 0.22, seed shear modulus of 15.47 MPa, seed-to-seed static friction coefficient of 0.25, seed-to-seed rolling friction coefficient of 0.67, seed-to-seed collision recovery coefficient of 0.64, seed-to-steel-plate static friction coefficient of 0.55, seed-to-steel-plate rolling friction coefficient of 0.45, and seed-to-steel plate collision recovery coefficient of 0.34. A two-sample t-test of the angle of repose obtained by the cylinder lifting method and the pumping plate method against the target value yielded P > 0.05, indicating the reliability of the simulation experiments.
ABSTRACT
This study addresses the challenge of incomplete separation of mechanically recovered residual films and impurities in cotton fields, examining their impact on resource utilization and environmental pollution. It introduces an innovative screening method that combines pneumatic force and mechanical vibration for processing crushed film residue mixtures. A double-action screening device integrating pneumatic force and a key-type vibrating screen was developed. The working characteristics of this device were analyzed to explore the dynamic characteristics and kinematic laws of the materials using theoretical analysis methods. This led to the revelation of the screening laws of residual films and impurities. Screening tests were conducted using the Central Composite Design method, considering factors such as fan outlet, fan speed, vibration frequency of the screen, and feeding amount, with the impurity-rate-in-film (Q) and film-content-in-impurity (W) as evaluation indexes. The significant influence of each factor on the indexes was determined, regression models between the test factors and indexes were established, and the effect laws of key parameters and their significant interaction terms on the indexes were interpreted. The optimal combination of working parameters for the screening device was identified through multivariable optimization methods. Validation tests under this optimal parameters combination showed that the impurity-rate-in-film was 3.08% and the film-content-in-impurity was 1.94%, with average errors between the test values and the predicted values of 3.36% and 5.98%, respectively, demonstrating the effectiveness of the proposed method. This research provides a novel method and technical reference for achieving effective separation of residual film and impurities, thereby enhancing resource utilization.
Subject(s)
Gossypium , Cotton Fiber/analysis , Environmental Pollution/prevention & controlABSTRACT
Degradation of bond strength due to corrosion of steel strands is of great importance for serviceability of prestressed concrete structures. An analytical model is proposed to demonstrate the effect of corrosion of steel strand on reduction of bond strength. Corrosion expansion force generated by steel strand corrosion before and after corrosion cracking is firstly estimated. Then, the reduced gripping effect of the concrete, change of friction coefficient between the corroded strand and reduction force on the bearing face are considered in calculating the pre-rib extrusion force. Finally, the enhancement of bond strength due to transverse confinement of stirrups is considered and the ultimate bond strength of corroded steel strand is calculated. Comparison of results between the prediction and experimental result shows the proposed model can be used to reasonably evaluate the bond strength. The prediction result of the bond strength model is affected by the degree of strand corrosion, but almost not by the drawing method.
ABSTRACT
The introduction of lanthanide ions (Ln3+) into all-inorganic lead-free halide perovskites has captured significant attention in optoelectronic applications. However, doping Ln3+ ions into heterometallic halide layered double perovskite (LDP) nanocrystals (NCs) and their associated doping mechanisms remain unexplored. Herein, we report the first colloidal synthesis of Ln3+ (Yb3+, Er3+)-doped LDP NCs utilizing a modified hot-injection method. The resulting NCs exhibit efficient near-infrared (NIR) photoluminescence in both NIR-I and NIR-II regions, achieved through energy transfer down-conversion mechanisms. Density functional theory calculations reveal that Ln3+ dopants preferentially occupy the Sb3+ cation positions, resulting in a disruption of local site symmetry of the LDP lattices. By leveraging sensitizations of intermediate energy levels, we delved into a series of Ln3+-doped Cs4M(II)Sb2Cl12 (M(II): Cd2+ or Mn2+) LDP NCs via co-doping strategies. Remarkably, we observe a brightening effect of the predark states of Er3+ dopant in the Er3+-doped Cs4M(II)Sb2Cl12 LDP NCs owing to the Mn component acting as an intermediate energy bridge. This study not only advances our understanding of energy transfer mechanisms in doped NCs but also propels all-inorganic LDP NCs for a wider range of optoelectronic applications.
ABSTRACT
Crystalline carbon nitride (CCN), derived from amorphous polymeric CN, is considered as a new generation of metal-free photocatalyst because of its high crystallinity. In order to further promote the photocatalytic performance of CCN, p-type MnO nanoparticles are in situ synthesized and merged with n-type CCN through a one-pot process to form p-n heterojunction. The formed interfacial electric field between the semiconductors with different work functions efficiently breaks the coulomb interaction between MnO and CCN. The prepared catalysts exhibit drastically increased photocatalytic hydrogen evolution (PHE) activity integrated with oxidation of alkyl and aryl alcohols under irradiation of visible light. In the aqueous solution of benzyl alcohol (BzOH), the hydrogen generation rate over MnO/CCN (39.58 µmol h-1) is nearly 7 times and 37 times that of pure CCN (5.76 µmol h-1) and CN (1.06 µmol h-1), respectively, combining with oxidation of BzOH to benzaldehyde. This work proposes an avenue for in situ construction of a novel 2D material-based S-scheme heterojunction and extends its application in solar energy conservation and utilization.
ABSTRACT
Organic light-emitting diodes (OLEDs) utilizing multi-resonance (MR) emitters show great potential in ultrahigh-definition display benefitting from superior merits of MR emitters such as high color purity and photoluminescence quantum yields. However, the scarcity of narrowband pure-green MR emitters with novel backbones and facile synthesis has limited their further development. Herein, two novel pure-green MR emitters (IDIDBN and tBuIDIDBN) are demonstrated via replacing the carbazole subunits in the bluish-green BCzBN skeleton with new polycyclic aromatic hydrocarbon (PAH) units, 5-phenyl-5,10-dihydroindolo[3,2-b]indole (IDID) and 5-(4-(tert-butyl)phenyl)-5,10-dihydroindolo[3,2-b]indole (tBuIDID), to simultaneously enlarge the π-conjugation and enhance the electron-donating strength. Consequently, a successful red shift from aquamarine to pure-green is realized for IDIDBN and tBuIDIDBN with photoluminescence maxima peaking at 529 and 532 nm, along with Commission Internationale de l'Eclairage (CIE) coordinates of (0.25, 0.71) and (0.28, 0.70). Furthermore, both emitters revealed narrowband emission with small full width at half-maximum (FWHM) below 28 nm. Notably, the narrowband pure-green emission was effectively preserved in corresponding devices, which afford elevated maximum external quantum efficiencies of 16.3% and 18.3% for IDIDBN and tBuIDIDBN.
Subject(s)
Indoles , Polycyclic Aromatic Hydrocarbons , ElectronsABSTRACT
Multiple-resonance thermally activated delayed fluorescence (MR-TADF) materials are highly coveted for their high efficiency and narrowband emission in organic light-emitting diodes (OLEDs). Nevertheless, the development of near-infrared (NIR) MR-TADF emitters remains a formidable challenge. In this study, we design two new NIR MR-TADF emitters, PXZ-R-BN and BCz-R-BN, by embedding 10H-phenoxazine (PXZ) and 7H-dibenzo[c,g]carbazole (BCz) fragments to increase the electron-donating ability or extending π-conjugation on the framework of para-boron fusing polycyclic aromatic hydrocarbons (PAHs). Both compounds emit in the NIR region, with a full-width at half-maximum (FWHM) of 49â nm (0.13â eV) for PXZ-R-BN and 43â nm (0.11â eV) for BCz-R-BN in toluene. To sensitize the two NIR MR-TADF emitters in OLEDs, a new platinum complex, Pt-1, is designed as a sensitizer. The PXZ-R-BN-based sensitized OLEDs achieve a maximum external quantum efficiency (EQEmax ) of nearly 30 % with an emission band at 693â nm, and exceptional long operational stability with an LT97 (time to 97 % of the initial luminance) value of 39084â h at an initial radiance of 1000â mW sr-1 m-2 . The BCz-R-BN-based OLEDs reach EQEmax values of 24.2 % with an emission band at 713â nm, which sets a record value for NIR OLEDs with emission bands beyond 700â nm.
ABSTRACT
In order to explore the secondary bond anchorage performance between prestressed tendons and concrete after the fracture of steel strands in post-tensioned, prestressed concrete (PPC) beams, a total of seven post-tensioned, prestressed concrete specimens with a size of 3 × 7Ï15.2 mm were constructed firstly, and the steel strands at the anchorage end were subjected to corrosion fracture. Then, the pull-out test of the specimens was conducted to explore the secondary anchorage bond mechanism of the residual stress of prestressed tendons experiencing local fracture. Moreover, the influences of factors such as the embedded length, release-tensioning speed, concrete strength, and stirrup configuration on anchorage bond performance were analyzed. Finally, the test results were further verified via finite element analysis. The results show that the failure of pull-out specimens under different parameters can be divided into two types: bond anchorage failure induced by the entire pull-out of steel strands and material failure triggered by the rupture of steel strands. The bond anchorage failure mechanism between steel strands and the concrete was revealed by combining the failure characteristics and pull-out load-slippage relation curves. The bond strength between prestressed steel strands and concrete can be enhanced by increasing the embedded length of steel strands, elevating the concrete strength grade, and enlarging the diameter of stirrups so that the specimens are turned from bond anchorage failure into material failure.
ABSTRACT
Vanadium dioxide (VO2) has garnered significant attention as a material for actively tunable infrared (IR) modulators due to its reversible and responsive modulation effect on IR radiation, which is accompanied by its intrinsic insulator-metal phase transition (IMT). Here, we propose a multilayer device structure that integrates VO2 film with microheater and interdigitated electrodes for cooperative thermal-electric field control of IMT. Our results demonstrate that while intense electric fields can trigger abrupt IMT, deep modulation of IR radiation requires energy integration through Joule heating, which limits the response time of IR transmission controlled by electric field. Thus, cooperative thermal-electric field control, which provides a constant, uniform temperature field while electrically switching the IMT, is more effective for achieving a faster response time and retaining the intrinsic modulation depth of VO2-based IR modulators. Our findings offer valuable insights for the development of VO2-based IR modulators with improved performance.
ABSTRACT
The alkaline hydrogen evolution reaction (HER) in an anion exchange membrane water electrolyzer (AEMWE) is considered to be a promising approach for large-scale industrial hydrogen production. Nevertheless, it is severely hampered by the inability to operate tolerable HER catalysts consistently under low overpotentials at ampere-level current densities. Here, we develop a universal ligand-exchange (MOF-on-MOF) modulation strategy to synthesize ultrafine Fe2P and Co2P nanoparticles, which are well anchored on N and P dual-doped carbon porous nanosheets (Fe2P-Co2P/NPC). In addition, benefiting from the downshift of the d-band center and the interfacial Co-P-Fe bridging, the electron-rich P site is triggered, which induces the redistribution of electron density and the swapping of active centers, lowering the energy barrier of the HER. As a result, the Fe2P-Co2P/NPC catalyst only requires a low overpotential of 175 mV to achieve a current density of 1000 mA cm-2. The solar-driven water electrolysis system presents a record-setting and stable solar-to-hydrogen conversion efficiency of 20.36%. Crucially, the catalyst could stably operate at 1000 mA cm-2 over 1000 h in a practical AEMWE at an estimated cost of US$0.79 per kilogram of H2, which achieves the target (US$2 per kg of H2) set by the U.S. Department of Energy (DOE).
ABSTRACT
The field harvesting process of harvesting machinery is often affected by high workload and environmental factors that can impede/delay manual rowing, thereby leading to lower efficiency and quality in the residual film collector. To address this challenge, an automatic rowing control system using the 4mz-220d self-propelled residual film collector as the experimental carrier was proposed in this study. Cotton stalks in the ridges were chosen as the research object, and a comprehensive application of key technologies, machinery, and electronic control was used, thereby incorporating a pure tracking model as the path-tracking control method. To achieve the automatic rowing function during the field traveling process, the fuzzy control principle was implemented to adjust the forward distance within the pure tracking model dynamically, and the expected steering angle of the steering wheel was determined based on the kinematic model of the recovery machine. The MATLAB/Simulink software was utilized to simulate and analyze the proposed model, thus achieving significant improvements in the automation level of the residual film collector. The field harvesting tests showed that the average deviation of the manual rowing was 0.144 m, while the average deviation of the automatic rowing was 0.066 m. Moreover, the average lateral deviation of the automatic rowing was reduced by 0.078 m with a probability of deviation within 0.1 m of 95.71%. The research study demonstrated that the designed automatic rowing system exhibited high stability and robustness, thereby meeting the requirements of the autonomous rowing operations of residual film collectors. The results of this study can serve as a reference for future research on autonomous navigation technology in agriculture.
ABSTRACT
Fe-doping effect-induced heterostructure formation and charge redistribution in Fe-doped NiS were revealed significantly for boosting the electrochemical oxygen evolution reaction.
ABSTRACT
We propose a reconfigurable spin tunnel diode based on a small spin-gapped semiconductor (non-doped VS2 monolayer) and semi-metallic magnets (doped VS2 monolayer) separated by a thin insulating tunneling barrier (h-BN). By using first-principles calculations assisted by the nonequilibrium Green's function method, we have carried out a comprehensive study of spin-dependent current and spin transport properties while varying the bias. The device exhibited a magnetization-controlled diode-like behavior with forward-allowed current under antiparallel magnetizations and reverse-forbidden current under parallel magnetizations at the two electrodes. The threshold voltage is tunable by the hole doping density of VS2 monolayers. The doping effect on VS2 monolayers indicates that the magnetic moments, the Heisenberg exchange parameters and Curie temperatures can be monotonically reduced by a larger hole doping density. Our study on VS2 heterostructures has presented a simple and practical device strategy with very promising applications in spintronics.
ABSTRACT
Developing Type-I core/shell quantum dots is of great importance toward fabricating stable and sustainable photocatalysts. However, the application of Type-I systems has been limited due to the strongly confined photogenerated charges by the energy barrier originating from the wide-bandgap shell material. In this project, we found that through the decoration of Au satellite-type domains on the surface of Type-I CdS/ZnS core/shell quantum dots, such an energy barrier can be effectively overcome and an over 400-fold enhancement of photocatalytic H2 evolution rate was achieved compared to bare CdS/ZnS quantum dots. Transient absorption spectroscopic studies indicated that the charges can be effectively extracted and subsequently transferred to surrounding molecular substrates in a subpicosecond time scale in such hybrid nanocrystals. Based on density functional theory calculations, the ultrafast charge separation rates were ascribed to the formation of intermediate Au2S layer at the semiconductor-metal interface, which can successfully offset the energy confinement introduced by the ZnS shell. Our findings not only provide insightful understandings on charge carrier dynamics in semiconductor-metal heterostructural materials but also pave the way for the future design of quantum dot-based hybrid photocatalytic systems.
ABSTRACT
Multiple resonance (MR) compounds have garnered substantial attention for their prospective utility in wide color gamut displays. Nevertheless, developing red MR emitters with both high efficiency and saturated emission color remains demanding. We herein introduce a comprehensive strategy for spectral tuning in the red region by simultaneously regulating the π-conjugation and electron-donating strengths of a double boron-embedded MR skeleton while preserving narrowband characteristics. The proof-of-concept materials manifested emissions from orange-red to deep red, with bandwidths below 0.12 eV. The pure-red device based on CzIDBNO displayed superior color purity with CIE coordinates of (0.701, 0.298), approaching the Broadcast Television 2020 standard. In concert with high photoluminescence quantum yield and strong horizontal dipole orientation, CzIDBNO also achieved a maximum external quantum efficiency of 32.5% and a current efficiency of 20.2 cd A-1, outstripping prior reported organic light-emitting diodes (OLEDs) with CIEx exceeding 0.68. These findings offer a roadmap for designing high-performance emitters with exceptional color purity for future OLED material research advancements.
ABSTRACT
During the COVID-19 pandemic, the treatment of pulmonary fungal infection faced noteworthy challenges. Amphotericin B has shown promising therapeutic effects as an inhalation treatment for pulmonary fungal infections, especially those associated with the COVID-19 virus, due to its rare resistance. However, because the drug frequently produces renal toxicity, its effective dose is limited in clinical use. In this work, the DPPC/DPPG mixed monolayer was used as the pulmonary surfactant monolayer to study the interaction between amphotericin B and the pulmonary surfactant monolayer during inhalation therapy using the Langmuir technique and atomic force microscopy. The effects of different molar ratios of AmB on the thermodynamic properties and surface morphology of the pulmonary surfactant monolayer at different surface pressures was evaluated. The results showed that when the molar ratio of AmB to lipids in the pulmonary surfactant was less than 1:1, the main intermolecular force was attractive at a surface pressure greater than 10 mN/m. This drug had little effect on the phase transition point of the DPPC/DPPG monolayer, but decreased the height of the monolayer at 15 mN/m and 25 mN/m. When the molar ratio of AmB to lipids was greater than 1:1, the intermolecular force was mainly repulsive at a surface pressure greater than 15 mN/m, and AmB increased the height of the DPPC/DPPG monolayer at both 15 mN/m and 25 mN/m. These results are helpful in understanding the interaction between the pulmonary surfactant model monolayer and different doses of drugs at various surface tensions during respiration.