ABSTRACT
In this study, the fundamental but previously overlooked factors of charge generation efficiency and light extraction efficiency (LEE) are explored and collaboratively optimized in tandem quantum-dot light-emitting diodes (QLEDs). By spontaneously forming a microstructured interface, a bulk-heterojunction-like charge-generation layer composed of a poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)/ZnO bilayer is fabricated and an ideal charge-generation efficiency surpassing 115% is obtained. The coupling strength of the waveguide mode for the top unit and the plasmon polariton loss for the bottom unit are highly suppressed using precise thickness control, which increases the LEE of the tandem devices. The red tandem QLED achieves an exceptionally low turn-on voltage for electroluminescence at 4.0 V and outstanding peak external quantum efficiency of 42.9%. The ultralow turn-on voltage originates from the sequential electroluminescence turn-on of the two emissive units of the tandem QLED. Benefiting from its unique electroluminescent features, an easily fabricated optical-electrical dual anti-counterfeiting display is built by combining a dichromatic tandem QLED with masking technology.
ABSTRACT
A flexible mechanoluminophore device that is capable of converting mechanical energy into visualizable patterns through light-emission holds great promise in many applications, such as human-machine interfaces, Internet of Things, wearables, etc. However, the development has been very nascent, and more importantly, existing mechanoluminophore materials or devices emit light that cannot be discernible under ambient light, in particular with slight applied force or deformation. Here we report the development of a low-cost flexible organic mechanoluminophore device, which is constructed based on the multi-layered integration of a high-efficiency, high-contrast top-emitting organic light-emitting device and a piezoelectric generator on a thin polymer substrate. The device is rationalized based on a high-performance top-emitting organic light-emitting device design and maximized piezoelectric generator output through a bending stress optimization and have demonstrated that it is discernible under an ambient illumination as high as 3000 lux. A flexible multifunctional anti-counterfeiting device is further developed by integrating patterned electro-responsive and photo-responsive organic emitters onto the flexible organic mechanoluminophore device, capable of converting mechanical, electrical, and/or optical inputs into light emission and patterned displays.
ABSTRACT
Nondoped organic light-emitting diodes (OLEDs) are of paramount importance for display and lighting applications owing to their advantages of facile fabrication and outstanding stability. However, nondoped OLEDs achieving extraordinary electroluminescence (EL) performance and low turn-on voltage (Von) remain sparse. Here, three Ir(III) complexes featuring N-heterocyclic carbene (NHC) auxiliary ligands functionalized with electron-deficient aromatic sulfonyl or phosphine oxide groups are reported as promising emitters for nondoped OLEDs. All Ir(III) complexes exhibit green emission with relatively high neat film efficiency. Although the photoluminescence spectra of three complexes reveal similarities, there are distinct differences in the nondoped EL performance. The nondoped device N3 based on tBu-Ir-ISO displays the most eminent EL performances and presents a low Von of 2.1 V, a power efficiency of 30.7 lm W-1, and a maximum current efficiency of 27.0 cd A-1, which can be attributed to steric hindrance and balanced carrier-transporting ability induced by electron-deficient substituents. Moreover, doped devices D1-D3 also realize excellent EL performance. It is believed that the strategy reported herein is a simple and efficient way of constructing excellent Ir(III) complexes for nondoped phosphorescent OLEDs.
ABSTRACT
In conventional organic light-emitting diodes (OLEDs), current balance between electron and hole transport regions is typically achieved by leakage of the major carrier through the devices or by accumulation of the major carrier inside the devices. Both of these are known to reduce performances leading to reduction of efficiency and operation stability due to exciton-polaron annihilation, etc. We found that hole diffusion in a centimeter-scale can be achieved in a PEDOT:PSS layer via composition and interface engineering. This ultralong distance hole diffusion enables substantially enhanced hole diffusion current in the lateral direction perpendicular to the applied electric field in typical organic optoelectronic devices. By introducing this lateral hole diffusion layer (LHDL) at the anode side of OLEDs, reduced carrier accumulation, improved efficiency, and enhanced operation stability are demonstrated. The application of the LHDL provides a third strategy for current balancing with much reduced harmful effects from the previous two approaches.
ABSTRACT
As a primary anticounterfeiting technology, most paper anticounterfeiting devices take advantage of photoresponsive behaviors of certain security materials or structures, thus featuring low-security threshold, which has been a critical global issue. To incorporate optoelectronic devices into existing anticounterfeiting technology suggests a feasible avenue to address this challenge. Here we report a high-performance organic light-emitting paper-based flexible anticounterfeiting (FAC) device with multiple stimuli-responsiveness, including light, electricity, and their combination. Without sacrificing the preexisted security information on the paper, we fabricate FAC device in a facile, low-cost yet high-fidelity fashion by integrating patterned electro-responsive and photo-responsive organic emitters onto paper substrates. By introducing optical microcavities, the FAC device shows considerable color shift upon different viewing angle and applied voltage, which is easily discernible by naked eyes. Notably, the FAC device is bendable, unclonable, and durable (a half-lifetime over 4000 hours at 100 cd m-2).
ABSTRACT
Constructing high-quality white organic light-emitting diodes (WOLEDs) remains a big challenge because of high demands on the electroluminescence (EL) performance including high efficiency, excellent spectral stability, and low roll-off simultaneously. To achieve effective energy transfer and trap-assisted recombination in the emissive layer, herein, four Ir(III) phosphors, namely, mOMe-Ir-PI (1), pOMe-Ir-PI (2), mOMe-Ir-PB (3), and pOMe-Ir-PB (4), were strategically designed via simple regulation of the substituent moiety and π conjugation of the chelated ligands. Their photophysical and EL properties were systematically investigated. When these phosphors are employed as doped emitters, the monochromic green organic light-emitting diodes not only exhibit a superior performance with the characteristics of 50.2 cd A-1, 39.2 lm W-1, and 15.1%, but also maintain a negligible roll-off ratio of 0.2% at 1000 cd m-2, which are better than those of commercial green Ir(ppy)2acac and Ir(ppy)3 in the same device configuration. Inspired by these outstanding performances, we successfully fabricated the warm WOLED utilizing 2 as a green component, affording a peak efficiency of 42.0 cd A-1, 29.3 lm W-1, and 18.6% and retaining at 39.9 cd A-1, 23.7 lm W-1, and 17.4% even at 1000 cd m-2. The results herein demonstrate the superiority of the molecular design and propose a simple method toward the development of promising Ir(III) phosphors for high-efficiency WOLEDs.
ABSTRACT
Paper substrate has many advantages, such as low cost, bendable, foldable, printable, and environmentally friendly recycling. Nowadays, paper has been further extended as a flexible platform to deliver electronic information with the integration of organic optoelectronic devices, such as organic thin-film transistor, organic solar cell, organic electrochromic device, and organic light-emitting device. It has great potential to become the new generation of flexible substrate. Given rough surface and porous of paper, many efforts have been underway in recent years to enable the compatibility between optoelectronics and paper substrate. In this review, we present the development history of paper and its physicochemical properties, and summarize the current development of paper-based organic optoelectronic devices. We also discuss the challenges that need to be addressed before practical uses of paper-based organic optoelectronic devices.
ABSTRACT
Here, this work presents an air-stable ultrabright inverted organic light-emitting device (OLED) by using zinc ion-chelated polyethylenimine (PEI) as electron injection layer. The zinc chelation is demonstrated to increase the conductivity of the PEI by three orders of magnitude and passivate the polar amine groups. With these physicochemical properties, the inverted OLED shows a record-high external quantum efficiency of 10.0% at a high brightness of 45,610 cd m-2 and can deliver a maximum brightness of 121,865 cd m-2. Besides, the inverted OLED is also demonstrated to possess an excellent air stability (humidity, 35%) with a half-brightness operating time of 541 h @ 1000 cd m-2 without any protection nor encapsulation.
ABSTRACT
Resonance interaction between a molecular transition and a confined electromagnetic field can lead to weak or strong light-matter coupling. Considering the substantial exciton-phonon coupling in thermally activated delayed fluorescence (TADF) materials, it is thus interesting to explore whether weak light-matter coupling can be used to redistribute optical density of states and to change the rate of radiative decay. Here, we demonstrate that the emission distribution of TADF emitters can be reshaped and narrowed in a top-emitting organic light-emitting device (OLED) with a weakly coupled microcavity. The Purcell effect of weak microcavity is found to be different for TADF emitters with different molecular orientations. We demonstrate that radiative rates of the TADF emitters with vertical orientation can be substantial increased in weakly coupled organic microcavity. These observations can enhance external quantum efficiencies, reduce efficiency roll-off, and improve color-purities of TADF OLEDs, especially for emitters without highly horizontal orientation.
ABSTRACT
Blade-coating is a potential method for preparing all-solution-processed quantum dot light-emitting diodes (QLEDs) because of its high material utilization and large-scale preparation compatibility. However, it is a challenge to prepare uniform-emitting, high-performance QLEDs by blade coating because of film uniformity issues. Here, we report an efficient all-blade-coated QLED through solvent engineering. A binary water/methanol solvent is used to decrease the surface tension, leading to uniform blade-coating poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films. The binary solvent also enhances hole transport abilities because of phase separations and chain reorientations of PEDOT and PSS chains. The uniformity of a poly(N-vinylcarbazole) (PVK) layer is also improved by using a chlorobenzene/toluene binary solvent to facilitate the spontaneous spreading of the PVK solution on the substrate. This enables the successful preparation of an efficient QLED with a maximum external quantum efficiency of 12.48%, which is about 2.6 times the value of the QLED without solvent engineering.
ABSTRACT
For hole-conductor-free, fully printable mesoscopic perovskite solar cells (MPSCs), it is difficult to achieve free and efficient diffusion of perovskite precursors in micron-scale porous structures. Thus, the wettability of the perovskite precursor is one of the most crucial factors that determine the performance of MPSCs. Here, d-sorbitol hexaacetate (DSHA) is introduced as an additive for fabricating hole-conductor-free, fully printable MPSCs based on methylammonium lead iodide (MAPbI3). The fabricated MPSCs exhibited an efficiency of 14.33%. Moreover, the influence of DSHA on the optical properties, morphology, and filling of perovskite in the MPSCs has been systematically investigated. The results revealed that DSHA effectively optimized the morphology, improved the pore-filling, and passivated the defects of perovskite films. Remarkably, the unencapsulated MPSCs retained 93% of their original power-conversion efficiency (PCE) after 45 days of storage in air with humidity of 50 ± 5%.
ABSTRACT
Perovskite nanocrystal light-emitting devices (PNC LEDs) exhibit great potential in display and lighting applications. Balanced hole and electron injection in the light-emitting layer is undoubtedly an effective way to improve LED performance. Here, bismuth (Bi) was introduced into PNC LEDs to form a silver-bismuth (Ag-Bi) bilayer anode. Ag diffused into a defective 2 nm thick Bi layer to form an alloy-like state that promoted hole injection, reduced the charge transfer resistance, and enhanced charge transfer, leading to more balanced hole-electron carriers in the emission layer through hole injection enhancement. As a result, the turn-on voltage and brightness changed from 2.41 V and 2200 cd m-2, respectively, for CsPb1-xZnxI3-based LEDs with a Ag monolayer anode to 2.2 V and 3714 cd m-2, respectively, for devices with a Ag-Bi bilayer anode. In addition, the performance of CsPbI3 and CsPbBrI2 PNC-based LEDs has also been effectively improved by using a Ag-Bi bilayer anode.
ABSTRACT
Two-dimensional (2D) vdW materials have been integrated into optoelectronic devices to achieve exceptional functionality. However, the integration of large-area 2D thin films into organic light-emitting devices (OLEDs) remains challenging because of the finite number of inorganic 2D materials and the high-temperature requirements of their deposition process. The construction of 2D organometallic materials holds immense potential because of their solution synthesis and unlimited structural and functional diversity. Here, we report a facile route using an oil-water interfacial coordination reaction between organic ligands and divalent metal ions to synthesize crystalline quasi-2D organometallic bis(dithiolato)nickel (NiDT) nanosheets with a centimeter scale and a tunable thickness. The NiDT nanosheets can be directly integrated into OLEDs for use as a hole buffer layer and a fluorescent mounting medium without the aid of a transfer process. Moreover, OLEDs with NiDT nanosheets show not only comparable efficiency to conventional OLEDs but also prolonged device lifetime by nearly 2 times. These results open up a new dimension to use quasi-2D organometallic nanosheets as functional layers in large-area organic devices.
ABSTRACT
Retraction of 'Sublimable cationic Ir(iii) phosphor using chlorine as a counterion for high-performance monochromatic and white OLEDs' by Lei Ding et al., Chem. Commun., 2018, 54, 11761-11764.
ABSTRACT
High-performance phosphorescent organic light-emitting devices (PhOLEDs) at high luminance are still a remaining problem that needs to be solved, especially blue PhOLEDs. Here, 5-(5-9 H-carbazol-9-yl)pyridin-2-yl)-8-(9 H-carbazol-9-yl)-5 H-pyrido[3,2- b]indole (p2PCB2CZ) with excellent characteristics as a host is designed to realize a novel host-guest system without hole trapping effect in blue PhOLEDs. The device in which p2PCB2CZ and bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium(III) (FIrpic) is used as host and guest, respectively, is proposed to improve the performances of blue PhOLEDs at high luminance, especially at ultrahigh luminance (>30000 cd/m2). The maximum external quantum efficiency (EQE) of this type of blue PhOLEDs is 19.2%, while the maximum EQE of the reference blue PhOLEDs is 18.7%. Nevertheless, the p2PCB2CZ-based devices exhibit significant advantages at high luminance, because its EQE still attains to 10.8% even when the luminance increases to 30000 cd/m2, which is 1.67 times that of the reference device. From measurements based on steady-state and time-resolved spectroscopies, the reduction of triplet-polaron quenching in p2PCB2CZ-based devices is proved to be the main reason for improving the performances of blue PhOLEDs at high luminance.
ABSTRACT
Different from the previous design strategy, herein, a cationic Ir(iii) complex ([(ptbi)2Ir(bisq)]Cl) with a small chlorine as the counterion was synthesized, which realized the formation of a solid film via a vacuum-deposition process. The white OLED, employing it as an orange-emitting layer, achieved excellent performances with a brightness of 50 122 cd m-2, a CE of 25.5 cd A-1, an EQE of 13.1%, accompanied by a low CE efficiency roll-off of 4.7%. These are the best results among evaporated cationic Ir(iii)-based white OLEDs reported so far.
ABSTRACT
At present, numerous functional layers are introduced to improve the carrier injection and balance the carrier transport in organic light-emitting devices (OLEDs). Although it may be a good way to enhance the efficiency of devices, the introduction of functional layers would also result in extra process and long manufacture period. Actually, with the enrichment of material system, many appropriate materials could be chosen to share two or even more functions in OLEDs. Here, via impedance spectroscopy and transient electroluminescence analysis, di-[4-(N,N-ditolyl-amino)-phenyl] cyclohexane (TAPC) and 4,7-diphenyl-1,10-phenanthroline (Bphen) are demonstrated to serve as carrier injection and transport layers simultaneously. As a result, efficient trilayer OLEDs are achieved with comparable performances to conventional multilayer devices. Further studies have also been carried out to analyze the recombination and quenching mechanisms in devices. TAPC can block electrons effectively, while Bphen avoids the accumulation of holes. It makes carriers in emitting layer become more balanced, resulting in the reduction of efficiency roll-off.
ABSTRACT
To develop B-O complementary-color white organic light-emitting diodes (WOLEDs) exhibiting high efficiency and low roll-off as well as color stability simultaneously, we have designed two orange iridium(III) complexes by simply controlling the position of the methoxyl group on the cyclometalated ligand. The obtained emitters mOMe-Ir-BQ and pOMe-Ir-BQ show good photophysical and electrochemical stabilities with a broadened full width at half-maximum close to 100 nm. The corresponding devices realize highly efficient electrophosphorescence with a maximum current efficiency (CE) and power efficiency (PE) of 24.4 cd A-1 and 15.3 lm W-1 at a high doping concentration of 15 wt %. Furthermore, the complementary-color all-phosphor WOLEDs based on these phosphors exhibit good performance with a maximum CE of 31.8 cd A-1, PE of 25.0 lm W-1, and external quantum efficiency of 15.5%. Particularly, the efficiency of this device is still as high as 29.3 cd A-1 and 14.2% at the practical brightness level of 1000 cd m-2, giving a small roll-off. Meanwhile, extremely high color stability is achieved by these devices with insignificant chromaticity variation.
ABSTRACT
Nondoped electroluminescent devices offer advantages over their doped counterparts such as good reproducibility, reduced phase separation between host and guest materials, and potential of lower-cost devices. However, low luminance efficiencies and significant roll-off values are longstanding issues for nondoped devices, and a rational design strategy for the preparation of efficient phosphors is highly desired. In this work, cyclometalated Ir(III) complexes 3CzIr(mtpy), 4CzIr(mtpy), 3POIr(mtpy), and 4POIr(mtpy) bearing carbazole (Cz) or diphenylphosphoryl (Ph2PO) groups substituted at different positions of 1,2-diphenyl-H-benzimidazole (HPBI) were designed and synthesized. Owing to the steric effects induced by these groups, a significant intermolecular interaction was avoided, thereby reducing self-quenching and triplet-triplet annihilation (TTA) at high brightness. Simultaneously, attached functional moieties manipulate the charge-carrier character and enhance the EL performance of the complexes. Device N3-10, based on 3POIr(mtpy), successfully realized excellent performance and improved efficiency stability, rendering a turn-on voltage of 2.5 V, a maximum current efficiency of 29.7 cd A-1, and a maximum power efficiency of 31.1 lm W-1, which are all almost 3-fold higher than that of the control device N-10 based on parent complex. Inspiringly, all of the devices showed reduced efficiency roll-off as luminance increased. To the best of our knowledge, these are good results for green-emitting PHOLEDs using vacuum evaporation techniques, and they provide fundamental insights into the future realization of efficient phosphorescent Ir(III) complexes and corresponding nondoped devices.
ABSTRACT
The high operating voltage is a primary issue preventing the commercial application of the ferroelectric organic field-effect transistor (Fe-OFET) nonvolatile memory (NVM). In this work, we propose a novel route to resolve this issue by employing two ultrathin AlOX interfacial layers sandwiching an ultrathin ferroelectric polymer film with a low coercive field, in the fabricated flexible Fe-OFET NVM. The operation voltage of Fe-OFET NVMs decreases with the downscaling thickness of the ferroelectric film. By inserting two ultrathin AlOX interfacial layers at both sides of the ultrathin ferroelectric film, not only the gate leakage is prominently depressed but also the mobility is greatly improved. Excellent memory performances, with large mobility of 1.7 ~ 3.3 cm2 V-1 s-1, high reliable memory switching endurance over 2700 cycles, high stable data storage retention capability over 8 × 104 s with memory on-off ratio larger than 102, are achieved at the low operating voltage of 4 V, which is the lowest value reported to data for all Fe-OFET NVMs. Simultaneously, outstanding mechanical fatigue property with the memory performances maintaining well over 7500 bending cycles at a bending radius of 5.5 mm is also achieved in our flexible FE-OFET NVM.