Quantification of imatinib and related compounds using capillary electrophoresis-tandem mass spectrometry with field-amplified sample stacking.

A quantification method for imatinib (IM), its major metabolite N-desmethyl imatinib (NDI), and a degradation by-product was developed using CE-MS combined with an online concentration technique. The use of multiple reaction monitoring (MRM)-MS/MS further improved the sensitivity of this technology. Liquid-liquid extraction (LLE) using tertiary butyl methyl ether yielded high recovery and reproducibility for the pretreatment of serum samples. The recovery rate exceeded 83% for all three analytes, and was 90% for IM. To improve quantification results, a conductivity-induced online analyte concentration technique, field-amplified sample stacking (FASS), was used. The S/N ratios were improved at least 10-fold when compared with conventional capillary zone electrophoresis. The detection limits were 0.2 ng/mL for IM, 0.4 ng/mL for NDI, and 4 ng/mL for the degradation by-product. These results are superior to those previously obtained by other reported methods. The new method was validated in terms of its selectivity, intra- and interday repeatability and accuracy, and sample storage stability, following the guidelines issued by the European Medicines Agency. Considering the convenient pretreatment procedure (LLE), superior sensitivity, and fast analysis speed (<15 min), this method can be useful in the determination of imatinib levels in blood.

Ultrasound-assisted dispersive liquid-liquid microextraction coupled with field-amplified capillary electrophoresis for sensitive and quantitative determination of fluoxetine and norfluoxetine enantiomers in biological fluids.

A rapid, simple, and sensitive technique for the quantitative detection of fluoxetine and norfluoxetine enantiomers in biological fluids was developed based on the combination of field-amplified sample stacking (FASS)-related capillary electrophoresis (CE) with ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME). The extraction efficiency of UA-DLLME was strongly related to extraction time, salt concentration, type of extraction and dispersion solvents, and volume of extraction and dispersion solvents. The extracted fluoxetine and norfluoxetine enantiomers in a mixture of 50% methanol and 50% deionized water were efficiently stacked using FASS and then separated using cyclodextrin-modified CE. Under optimal conditions of FASS (chiral selector, 3 mM trimethyl-ß-cyclodextrin; and background electrolyte, 100 mM phosphate buffer) and UA-DLLME (extraction solvent, 200 µL of acetone; and dispersed solvent, 50 µL of C2H2Cl4 in 1 mL of the sample solution), the obtained enrichment factors of fluoxetine and norfluoxetine enantiomers reached approximately 2000. The linear ranges for the quantification of fluoxetine and norfluoxetine enantiomers were 0.3-150 and 0.6-150 nM, respectively. The relative standard deviations in peak areas and migration time for four analytes were less than 3.3% and 6.3%, respectively. The proposed system provided limits of detection (signal-to-noise ratio of 3) for four analytes corresponding to 0.1 nM. The precision and accuracy for urine and serum samples were less than 6.8 and 8.3%, respectively. These findings suggested that the proposed system exhibited a high potential for the reliable determination of fluoxetine and norfluoxetine enantiomers in clinical samples. Graphical abstract.

A sensitive two-step stacking by coupling field-enhanced sample injection and micelle to cyclodextrin stacking for the determination of neutral analytes.

To promote the detection sensitivity of neutral analytes, a sensitive two-step stacking strategy by coupling field-enhanced sample injection and micelle to cyclodextrin stacking in reverse migrating micelles MEKC has been established by selecting jujuboside A and B as models. The stacking mechanism, affecting factors as well as analytical performances of the proposed method were investigated. Compared with typical injection, the sensitivity enhancement factors of this method were up to 140- and 152-fold for jujuboside A and B, respectively. The enhancements were 8-10 times better than only single stacking strategy by MCDS. The LODs were 0.2-0.3 µg mL-1, interday and intraday%RSD were both lower than 4.3%, and a good linearity (r>0.999) was obtained. Feasibility in real samples analysis was evaluated by using Semen Ziziphi Spinosae dispensing granule and rat's urine. The results suggested that the strategy was simple, reliable, sensitive and promising for the analysis of neutral analytes in complex sample matrix.

On-line synergistic stacking in capillary zone electrophoresis featuring field-amplified sample stacking and micelle to cyclodextrin stacking in the determination of two alkaloids in complicated matrix samples.

A novel on-line synergistic proconcentration strategy coupling field-amplified sample stacking and micelle to cyclodextrin stacking for cationic analytes in capillary zone electrophoresis has been proposed and applied for the separation and determination of two alkaloids, matrine, and oxymatrine in complicated matrix samples. The approach was performed by the long injection of sample in a low-conductivity sodium dodecyl benzene sulfonate solution followed by the injection of hydroxypropyl-ß-cyclodextrin solution in higher conductivity. The stacking mechanism of this method has been expounded and parameters affecting stacking effect have been optimized in our study. Under the optimum experimental conditions, 169- and 218-fold sensitivity improvements were achieved for matrine and oxymatrine when compared with normal injection. Analytical indicators including linearity, limits of detection, and reproducibility (intra- and inter-day relative standard deviations) were evaluated. Moreover, sample matrix effect was studied using compound flavescent sophora and salicylic acid powder and spiked urine samples. The developed method is an attempt for the combination of micelle to cyclodextrin stacking with other stacking methods. It could be a good alternative choice for the determination of alkaloids in a complex sample matrix.

Electrophoretic analysis of polyamines in exhaled breath condensate based on gold-nanoparticles microextraction coupled with field-amplified sample stacking.

In this work, citrate-capped gold-nanoparticles (citrate-AuNPs) have been firstly used for selective extraction of trace polyamines, putrescine (Put) and cadaverine (Cad), followed by field-amplified sample stacking (FASS) coupled with capillary electrophoresis and capacitively coupled contactless conductivity detection (FASS-CE-C4D). Put and Cad were extracted by electrostatic attractions between the amine group of the polyamines and the citrate ligands adsorbed on the surfaces of AuNPs. AuNPs microextraction (AuNPs-ME) effectively shortened preparation time (50 min) by introducing ultrasound, and the required sample extraction volume was only 1 mL. Furthermore, a synergistic enrichment strategy based on off-line AuNPs-ME and on-line FASS significantly improved the detection sensitivity, making the enrichment factors up to 1726-1887 times. Under the optimum conditions, Put and Cad could be well separated from the potential coexisting substances and then directly determined by CE-C4D without derivatization. Due to its low sample consumption, high sensitivity (LODs: 0.070-0.17 ng mL-1), and acceptable recoveries (90-105%), this AuNPs-ME/FASS-CE-C4D method provides a rapid, economical and eco-friendly approach for direct determination of polyamines in human exhaled breath condensate, and has potential application prospects in preliminary noninvasive diagnosis of oral and respiratory inflammation.

Highly Sensitive SDS Capillary Gel Electrophoresis with Sample Stacking Requiring Only Nanograms of Adeno-Associated Virus Capsid Proteins.

Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) has been the method of choice in the past decades for size-based protein analysis. However, in general it requires the protein concentration in mg/mL level and thus is not practical for trace level protein analysis, not to mention the lengthy labor-intensive procedures. The SDS capillary gel electrophoresis (SDS CGE) method reported herein requires only nanogram-sized proteins loaded onto the autosampler. A sample stacking technique (e.g., head-column field-amplified sample stacking (HC FASS)) was employed, providing three orders of magnitude sensitivity enhancement compared to conventional SDS CGE. This method has been used routinely in purity analysis and characterization of adeno-associated virus (AAV) intermediates and finished gene therapeutics of AAV vectors. The sensitivity achieved is comparable to the currently most sensitive size-based protein assay silver-stained SDS PAGE. The highly sensitive sample stacking SDS CGE can be used for other types of proteins as well.

Scaling behavior in on-chip field-amplified sample stacking.

Field amplified sample stacking (FASS) uses differential electrophoretic velocity of analyte ions in the high-conductivity background electrolyte zone and low conductivity sample zone for increasing the analyte concentration. The stacking rate of analyte ions in FASS is limited by molecular diffusion and convective dispersion due to nonuniform electroosmotic flow (EOF). We present a theoretical scaling analysis of stacking dynamics in FASS and its validation with a large set of on-chip sample stacking experiments and numerical simulations. Through scaling analysis, we have identified two stacking regimes that are relevant for on-chip FASS, depending upon whether the broadening of the stacked peak is dominated by axial diffusion or convective dispersion. We show that these two regimes are characterized by distinct length and time scales, based on which we obtain simplified nondimensional relations for the temporal growth of peak concentration and width in FASS. We first verify the theoretical scaling behavior in diffusion- and convection-dominated regimes using numerical simulations. Thereafter, we show that the experimental data of temporal growth of peak concentration and width at varying electric fields, conductivity gradients, and EOF exhibit the theoretically predicted scaling behavior. The scaling behavior described in this work provides insights into the effect of varying experimental parameters, such as electric field, conductivity gradient, electroosmotic mobility, and electrophoretic mobility of the analyte on the dynamics of on-chip FASS.

Sample Preconcentration Protocols in Microfluidic Electrophoresis.

Electrophoretic on-line sample preconcentration techniques in microfluidic channels improve the sensitivity prior to the separation. Among various techniques, the most important field-amplified sample stacking and sweeping on cross-channel microchips are demonstrated. As a novel microfluidic preconcentration approach, a large-volume sample stacking with electroosmotic flow pump (LVSEP) on straight-channel chips is also presented, which can omit a complicated voltage program for sample injection processes. In this chapter, we describe how to prepare and how to run these on-line sample preconcentration methods in microchip electrophoresis.

Molecular-sieve-based matrix solid-phase extraction combined with field-amplified sample stacking in capillary electrophoresis for the determination of three organic acids in a complex solid matrix.

A simple, convenient, and sensitive method that involves combining matrix solid-phase dispersion extraction with field-amplified sample stacking in capillary electrophoresis has been developed for the determination of organic acids in a complex solid matrix. Mesoporous molecular sieve, MCM-48, was synthesized by a hydrothermal method and selected as the adsorbent in matrix solid-phase dispersion. After fast extraction, the enriched analytes were back-extracted into a basic aqueous solution for field-amplified sample stacking in capillary electrophoresis. Parameters that affect extraction efficiency and sample stacking were optimized. Under the optimal conditions, approximately 42-, 49-, and 56-fold sensitivity enhancements were achieved for danshensu, protocatechuic acid, and cinnamic acid, respectively, when compared to normal injection. A satisfactory correlation coefficient (r > 0.99) was obtained. Both intra- and interday precision were lower than 2.53%. And the limits of detection of the three organic acids ranged between 0.01 and 0.029 µg/mL. Finally, the newly proposed method was successfully applied to the determination of organic acids in Fufang Danshen tablets, which indicates its great potential in analyzing organic acids in a complex matrix.

Determination of d-amphetamine and diphenhydramine in beagle dog plasma by a 96-well formatted liquid-liquid extraction and capillary zone electrophoresis with field-amplified sample stacking.

This paper describes a method for quantification of d-amphetamine and diphenhydramine in beagle dog plasma by organic solvent field-amplified sample stacking (FASS)-capillary zone electrophoresis (CZE), using amlodipine as the internal standard. The separation was carried out at 25 °C in a 40.2 cm × 75 µm fused-silica capillary with an applied voltage of 20 kV using 25 mM phosphate-18.75 mM borate (pH 3.5). The detection wavelength was 200 nm. Clean-up and preconcentration of plasma biosamples were developed by 96-well formatted liquid- liquid extraction (LLE). In this study, the peak areas of d-amphetamine, diphenhydramine and amlodipine in the plasma sample increased by the factor of 48, 67 and 43 compared to the CZE without sample stacking. The method was suitably validated with respect to stability, specificity, linearity, lower limit of quantitation, accuracy, precision and extraction recovery. The calibration graph was linear from 2 to 500 ng/ml for d-amphetamine and 2-5000 ng/ml for diphenhydramine. All the validation data were within the required limits. Compared with the LC/MS/MS method that we previously established, there was no significant difference between the two methods in validation characteristics, except the LLOQs. The developed method was successfully applied to the evaluation of pharmacokinetic study of the Quick-Acting Anti-Motion Capsules (QAAMC) in beagle dogs.

Quality evaluation of six bioactive constituents in goji berry based on capillary electrophoresis field amplified sample stacking.

Goji berry, fruits of the plant Lycium barbarum L., has long been used as traditional medicine and functional food in China. In this work, a simple and easy-operation on-line concentration capillary electrophoresis (CE) for detection flavonoids in goji berry was developed by coupling of field amplified sample stacking (FASS) with an electroosmotic (EOF) pump driving water removal process. Due to the EOF pump and electrokinetic injection showing different influence on the concentration, the analytes injection condition should be systemically studied. Thereafter, the verification of the analytes injection conditions was achieved using response surface experimental design. Under the optimum conditions, 86-271 folds sensitivity enhancement upon normal capillary zone electrophoresis (CZE, 50 mbar × 5 s) were achieved for six flavonoids, and the detection limits ranged from 0.35 to 1.82 ng/mL; the LOQ ranged from 1.20 to 6.01 ng/mL. Eventually, the proposed method was applied to detect flavonoids in 30 goji berry samples from different habitats of China; and the results indicated that the flavonoids were rich in the eluent of 30-60% methanol, which provided a reference for extraction of goji berry flavonoids.

Insights into head-column field-amplified sample stacking: Part II. Study of the behavior of the electrophoretic system after electrokinetic injection of cationic compounds across a short water plug.

Part I on head-column field-amplified sample stacking comprised a detailed study of the electrokinetic injection of a weak base across a short water plug into a phosphate buffer at low pH. The water plug is converted into a low conductive acidic zone and cationic analytes become stacked at the interface between this and a newly formed phosphoric acid zone. The fundamentals of electrokinetic processes occurring thereafter were studied experimentally and with computer simulation and are presented as part II. The configuration analyzed represents a discontinuous buffer system. Computer simulation revealed that the phosphoric acid zone at the plug-buffer interface becomes converted into a migrating phosphate buffer plug which corresponds to the cationically migrating system zone of the phosphate buffer system. Its mobility is higher than that of the analytes such that they migrate behind the system zone in a phosphate buffer comparable to the applied background electrolyte. The temporal behaviour of the current and the conductivity across the water plug were monitored and found to reflect the changes in the low conductivity plug. Determination of the buffer flow in the capillary revealed increased pumping caused by the mismatch of electroosmosis within the low conductivity plug and the buffer. This effect becomes elevated with increasing water plug length. For plug lengths up to 1% of the total column length the flow quickly drops to the electroosmotic flow of the buffer and simulations with experimentally determined current and flow values predict negligible band dispersion and no loss of resolution for both low and large molecular mass components.

On-line double focusing of atenolol and metoprolol in human urine using capillary electrophoresis with the aid of ß-cyclodextrin.

A maneuverable and sensitive on-line double focusing technique combined field amplified sample stacking (FASS) with micelle to solvent stacking (MSS) with the aid of ß-cyelodextrin (ß-CD) is developed to detect the contents of AT and ME in human urine by capillary electrophoresis (CE) with UV detector. Small amount of ß-CD not only increase the critical micelle concentration (CMC) of SDS, but also strengthen the interaction between SDS and the aimed compound by forming inclusion complexes. The result indicates that the addition of ß-CD affords 5.5- and 3.5-fold improvements for atenolol (AT) and metoprolol (ME) in sensitivity than that of in the absence of ß-CD in the double focusing system, respectively. Under the optimal conditions, about 200-fold improvement in sensitivity for analytes is achieved compared with conventional CE method. The limits of detection (LODs) at a signal-to-noise of 3 (S/N = 3) of the two ß-blockers can be reached 3.3 and 3.7 ng mL-1 respectively, which are lower than minimum required performance levels (MRPLs) set by the World Anti Doping Agency. The relative standard deviations (RSDs) of peak areas of intra-day and inter-day are 3.51-3.38% and 2.34-4.28% (n = 6), respectively. AT and ME in urine without special pretreatment and additional instrument are analyzed. The recoveries are 82-98% with RSDs less than 2.0%.

Insights into head-column field-amplified sample stacking: Part I. Detailed study of electrokinetic injection of a weak base across a short water plug.

The fundamentals of electrokinetic injection of the weak base methadone across a short water plug into a phosphate buffer at low pH were studied experimentally and with computer simulation. The current during electrokinetic injection, the formation of the analyte zone, changes occurring within and around the water plug and mass transport of all compounds in the electric field were investigated. The impact of water plug length, plug injection velocity, and composition of sample, plug and background electrolyte are discussed. Experimental data revealed that properties of sample, water plug and stacking boundary are significantly and rapidly altered during electrokinetic injection. Simulation provided insight into these changes, including the nature of the migrating boundaries and the stacking of methadone at the interface to a newly formed phosphoric acid zone. The data confirm the role of the water plug to prevent contamination of the sample by components of the background electrolyte and suggest that mixing caused by electrohydrodynamic instabilities increases the water plug conductivity. The sample conductivity must be controlled by addition of an acid to prevent generation of reversed flow which removes the water plug and to create a buffering environment. Results revealed that a large increase in background electrolyte concentration is not accompanied with a significant increase in stacking.

Surfactant-assisted dispersive liquid-liquid microextraction combined with field-amplified sample stacking in capillary electrophoresis for the determination of mexiletine and lidocaine.

A sensitive method for the determination of mexiletine and lidocaine using surfactant-assisted dispersive liquid-liquid microextraction coupled with capillary electrophoresis was developed. Triton X-100 and dichloromethane were used as the dispersive agent and extraction solvent, respectively. After the extraction, mexiletine and lidocaine were analyzed using capillary electrophoresis with ultraviolet detection. The detection sensitivity was further enhanced through the use of field-amplified sample stacking. Under optimal extraction and stacking conditions, the calibration curves were linear over a concentration range of 0.05-1.00 µM for mexiletine and 0.03-1.00 µM for lidocaine. The limits of detection (signal-to-noise ratio of 3) were 0.01 and 0.01 µM for mexiletine and lidocaine, respectively. An approximately 1141- to 1250-fold improvement in sensitivity was observed for the two analytes compared with the injection of a standard solution without the surfactant-assisted dispersive liquid-liquid microextraction and field-amplified sample stacking procedures. This developed method was successfully applied to the determination of mexiletine and lidocaine in human urine and serum samples. Both precision and accuracy for urine and serum samples were less than 8.7 and 6.7%, respectively. The recoveries of the two analytes from urine and serum samples were 54.7-64.9% and 16.1-56.5%, respectively.

Evaluation of various approaches to the isolation of steroid hormones from urine samples prior to FASS-MEKC analysis.

The goal of this study was to assess various analytical approaches for the simultaneous and efficient extraction of steroid hormones (cortisone, cortisol, prednisolone, corticosterone, testosterone, 17α-methyltestosterone, epitestosterone, progesterone) from urine samples prior to separation based on field-amplified sample stacking MEKC (FASS-MEKC). FASS-MEKC successfully allowed the compounds to be separated within 12 min using a BGE composed of 5 mM sodium tetraborate, 150 mM boric acid, 50 mM SDS, and 15% methanol. Therefore, many procedures such as solid-phase microextraction, SPE, and dispersive liquid-liquid microextraction (DLLME) were tested and compared using a multivariate tool, namely, cluster analysis. Finally, DLLME-FASS-MEKC was validated and proved a good linearity of calibration curves (R2 above 0.9948) in a concentration range from 50 to 1000 ng/mL for all analytes. The LOD was established at 15 ng/mL, whereas the LOQ was 50 ng/mL. The intra- and interday precision, expressed as RSD%, did not exceed 9.97%. The DLLME-FASS-MEKC method was successfully applied to the analysis of urine samples from healthy volunteers and sportsmen. This methodology could prove to be useful in clinical studies and/or doping control depending on the steroid concentrations required in biomedical applications.

Combination of micelle collapse and field-amplified sample stacking in capillary electrophoresis for determination of trimethoprim and sulfamethoxazole in animal-originated foodstuffs.

An on-line preconcentration method combining micelle to solvent stacking (MSS) with field-amplified sample stacking (FASS) was employed for the analysis of trimethoprim (TMP) and sulfamethoxazole (SMZ) by capillary zone electrophoresis (CZE). The optimized experimental conditions were as followings: (1) sample matrix, 10.0mM SDS-5% (v/v) methanol; (2) trapping solution (TS), 35mM H3PO4-60% acetonitrile (CH3CN); (3) running buffer, 30mM Na2HPO4 (pH=7.3); (4) sample solution volume, 168nL; TS volume, 168nL; and (5) 9kV voltage, 214nm UV detection. Under the optimized conditions, the limits of detection (LODs) for SMZ and TMP were 7.7 and 8.5ng/mL, and they were 301 and 329 times better compared to a typical injection, respectively. The contents of TMP and SMZ in animal foodstuffs such as dairy products, eggs and honey were analyzed, too. Recoveries of 80-104% were acquired with relative standard deviations of 0.5-5.4%.

Acupuncture injection for field amplified sample stacking and glass microchip-based capillary gel electrophoresis.

Acupuncture sample injection is a simple method to deliver well-defined nanoliter-scale sample plugs in PDMS microfluidic channels. This acupuncture injection method in microchip CE has several advantages, including minimization of sample consumption, the capability of serial injections of different sample solutions into the same microchannel, and the capability of injecting sample plugs into any desired position of a microchannel. Herein, we demonstrate that the simple and cost-effective acupuncture sample injection method can be used for PDMS microchip-based field amplified sample stacking in the most simplified straight channel by applying a single potential. We achieved the increase in electropherogram signals for the case of sample stacking. Furthermore, we present that microchip CGE of ΦX174 DNA-HaeⅢ digest can be performed with the acupuncture injection method on a glass microchip while minimizing sample loss and voltage control hardware.

Determination of deferasirox in human plasma by short-end injection and sweeping with a field-amplified sample stacking and micellar electrokinetic chromatography.

A field-amplified sample stacking-sweeping micellar electrokinetic chromatography with short-end injection was established for determination of deferasirox (DFX) in plasma. DFX was extracted from plasma and reconstituted with deionized water (lower conductivity solution). Capillary (effective length, 10cm) was filled with background electrolyte (40mM phosphate buffer, pH 4.5, containing 20% methanol). After sample loading from outlet end at 5psi for 15s, separation was carried out by applying high voltage at 15kV for 10min. Sodium dodecyl sulfate (SDS) was used to sweep DFX for enhancing sensitivity. The optimal CE separation conditions were 40mM phosphate buffer at pH 4.5 containing 100mM SDS and 20% methanol. The analysis time was about 3.5min for DFX. The calibration curve of DFX was ranged from 1 to 20µg/ml. The linearity (r) was more than 0.998. RSD and RE in intra- and inter-day assays were all below 12.14%. The limit of detection (LOD, S/N=3) for DFX was 0.3µg/ml. The sensitivity enhancement factor between sweeping-FASS MEKC and capillary zone electrophoresis is 3.3. Finally, the method was applied for determination of DFX in ß-thalassemia patients.

Sensitive detection of piperazinyl phenothiazine drugs by field-amplified sample stacking in capillary electrophoresis with dispersive liquid-liquid microextraction.

A rapid, simple and sensitive method for the detection of piperazinyl phenothiazine drugs using dispersive liquid-liquid microextraction (DLLME) combined with field-amplified sample stacking (FASS) in CE was developed. Sensitivity parameters that affect the extraction and FASS efficiency, such as the type and volume of disperser solvent, extraction time, addition of salt, and efficiency of FASS, were investigated and optimized. Note that the conductivity ratio between BGE and sample zone was measured to be 2300. Under optimal extraction and stacking conditions, the calibration curve, which ranged from 0.3 to 160 ng/mL, demonstrated good linearity with a correlation coefficient r≧ 0.9900. The LODs of prochlorperazine (Pcp), trifluoperazine (Tfp), perphenazine (Ppa), and fluphenazine (Fpa) at an S/N of 3 were 0.1, 0.1, 0.07, and 0.08 ng/mL, respectively. An approximately 1000-fold to 2500-fold improvement in sensitivity was achieved for the four tested analytes compared to conventional CZE without DLLME. The recoveries of all phenothiazines in urine and plasma ranged from 85.7 to 107.6% and 95.6 to 105.4%, respectively. The proposed method was demonstrated to be a rapid and convenient method for the determination of four piperazinyl phenothiazine drugs in human urine and plasma.