ABSTRACT
Agricultural practices significantly contribute to greenhouse gas (GHG) emissions, necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production. Plastic film mulching is commonly used in the Loess Plateau region. Incorporating slow-release fertilizers as a replacement for urea within this practice can reduce nitrogen losses and enhance crop productivity. Combining these techniques represents a novel agricultural approach in semi-arid areas. However, the impact of this integration on soil carbon storage (SOCS), carbon footprint (CF), and economic benefits has received limited research attention. Therefore, we conducted an eight-year study (2015-2022) in the semi-arid northwestern region to quantify the effects of four treatments [urea supplied without plastic film mulching (CK-U), slow-release fertilizer supplied without plastic film mulching (CK-S), urea supplied with plastic film mulching (PM-U), and slow-release fertilizer supplied with plastic film mulching (PM-S)] on soil fertility, economic and environmental benefits. The results revealed that nitrogen fertilizer was the primary contributor to total GHG emissions (≥71.97%). Compared to other treatments, PM-S increased average grain yield by 12.01%-37.89%, water use efficiency by 9.19%-23.33%, nitrogen accumulation by 27.07%-66.19%, and net return by 6.21%-29.57%. Furthermore, PM-S decreased CF by 12.87%-44.31% and CF per net return by 14.25%-41.16%. After eight years, PM-S increased SOCS (0-40 cm) by 2.46%, while PM-U decreased it by 7.09%. These findings highlight the positive effects of PM-S on surface soil fertility, economic gains, and environmental benefits in spring maize production on the Loess Plateau, underscoring its potential for widespread adoption and application.
Subject(s)
Agriculture , Carbon Footprint , Fertilizers , Plastics , Zea mays , Zea mays/growth & development , Agriculture/methods , China , Soil/chemistry , Greenhouse Gases/analysis , Nitrogen/analysisABSTRACT
Biomass-based slow-release fertilizers (SRFs) are a sustainable solution for addressing food scarcity, improving fertilizer efficiency, and reducing pollution, whereas they still face complex preparation, high costs, and low release characteristics. This study introduces a simple and innovative approach to producing bifunctional green SRFs with controlled release and conditioning properties for saline soils and harsh environments. The method involves a one-pot preparation of microsphere-structured amine-modified lignin slow-release fertilizer (L-UX) using biomass lignin as the starting material. The L-UX demonstrates an exceptional fertilizer loading rate (66.2 %) and extended slow-release performance (288 h), effectively enhancing the fertilizer's release ability. Compared to traditional fertilizers, the bifunctional L-UX significantly improves soil water retention capacity (824.3 %), plant growth, and germination percentage in challenging soil conditions (133 %). These findings highlight the potential of L-UX as a large-scale controlled-release fertilizer in harsh environments. A life cycle assessment (LCA) was also conducted to evaluate the environmental impact of L-UX from its production to disposal. This revealed that L-UX has a minimal environmental footprint compared to conventional inorganic fertilizers. This study further supports the widespread application of L-UX as an environmentally friendly alternative.
ABSTRACT
The exploration of environmentally friendly slow-release fertilizer (SRF) based on natural bio-polymers is of great importance in the development of modern agriculture and horticulture. Herein, a novel starch carbamate (SC) modified sodium alginate (SA) hydrogel (SC/SAH) was prepared utilizing as-synthesized SC and natural SA through the cationic ions crosslinking method and ultimately the corresponding slow-release fertilizer (SC/SAH-SRF) was successfully developed by immersing the dried SC/SAH matrix into saturated urea solution. Due to the low gelation temperature and high viscosity of the synthesized SC, the formed SC/SAH exhibits significantly enhanced properties including excellent water absorbency up to 8.02 g/g with considerable repeatability, abundant pore structure and high hydrophilicity compared with the neat SAH and natural starch based hydrogel (NS/SAH). Accordingly, the SC/SAH leads to higher urea loading amount â¼ 1.28 g/g. Importantly, the resultant SC/SAH-SRF also shows superior slow-release performance, yielding a cumulative urea release of only 61.6 % within 10 h and almost completely release >16 h in water, what's more, only 58.5 % of the urea releases within 25 days and exceeding 50 days for complete release in soil column assays. The slow-release of urea from SC/SAH-SRF well complies for the first-order kinetics and accomplishes via a non-Fickian diffusion process. Moreover, the pot experiment demonstrates that the SC/SAH-SRF has higher growth promotion role for the maize seedlings than those of others. Consequently, this work provides a novel strategy for preparing environmentally friendly SRF by blending modified starch and hydrogel.
ABSTRACT
Background: Urea is a fertilizer widely used by farmers, especially vegetable farmers, due to its high nitrogen content, around 46 %. However, plants only use a small amount of nitrogen, a maximum of 35 %, while the remaining nitrogen is wasted and released into the environment. Undeniably, it causes increases production costs and environmental problems. A slow-release urea fertilizer (SRF) has been formulated to resolve these issues. Methods: In this study, the membrane was made of chitosan with several crosslinking agents such as Tripolyphosphate (TPP). In addition, calcium ion bonds are expected to increase the interaction with urea fertilizer through the encapsulation process. The results: Our data showed that urea slow-release fertilizer (SRF) with the chitosan/TPP/Ca membrane, was successfully synthesized. This membrane has the characteristics of a thin white layer that is transparent. The physical and chemical characterization of SRF membranes with various coating membrane variations showed that the chitosan/TPP/Ca-urea membrane has Young's modulus of 7.75-22.05 N/mm2, swelling of 109.52-132.62 % and porosity of 0.756-1.06 %. Functional group analysis shows that several spectral changes indicate the presence of crosslinking process between the chitosan functional groups and TPP. The urea release results show that the membrane is released through a diffusion mechanism. Furthermore, SEM results show that these membranes have pores with various shapes and sizes. Conclusion: Based on the result, it can be concluded that chitosan membrane modification with the addition of TPP and calcium oxide provides improved membrane characteristic cs including degree of development, hydrophobicity, membrane stress, and nitrogen release on the membrane. This membrane shows is indicating suitability as a slow-release fertilizer.
ABSTRACT
Background: A balanced supply of nitrogen is essential for spinach, supporting both optimal growth and appropriate nitrate (NO3 -) levels for improved storage quality. Thus, choosing the correct nitrogen fertilizer type and application rate is key for successful spinach cultivation. This study investigated the effects of different nitrogen (N) fertilizer type and application rates on the growth, nitrate content, and storage quality of spinach plants. Methods: Four fertilizer types were applied at five N doses (25, 50, 200, and 400 mg N kg-1) to plants grown in plastic pots at a greenhouse. The fertilizer types used in the experiment were ammonium sulphate (AS), slow-release ammonium sulphate (SRAS), calcium nitrate (CN), and yeast residue (YR). Spinach parameters like Soil Plant Analysis Development (SPAD) values (chlorophyll content), plant height, and fresh weight were measured. Nitrate content in leaves was analyzed after storage periods simulating post-harvest handling (0, 5, and 10 days). Results: The application of nitrogen fertilizer significantly influenced spinach growth parameters and nitrate content. The YRx400 treatment yielded the largest leaves (10.3 ± 0.5 cm long, 5.3 ± 0.2 cm wide). SPAD values increased with higher N doses for AS, SRAS, and CN fertilizers, with AS×400 (58.1 ± 0.8) and SRAS×400 (62.0 ± 5.8) reaching the highest values. YR treatments showed a moderate SPAD increase. Fresh weight response depended on fertilizer type, N dose, and storage period. While fresh weight increased in all fertilizers till 200 mg kg-1 dose, a decrease was observed at the highest dose for AS and CN. SRAS exhibited a more gradual increase in fresh weight with increasing nitrogen dose, without the negative impact seen at the highest dose in AS and CN. Nitrate content in spinach leaves varied by fertilizer type, dose, and storage day. CNx400 resulted in the highest NO3 - content (4,395 mg kg-1) at harvest (Day 0), exceeding the European Union's safety limit. This level decreased over 10 days of storage but remained above the limit for CN on Days 0 and 5. SRAS and YR fertilizers generally had lower NO3 - concentrations throughout the experiment. Storage at +4 °C significantly affected NO3 - content. While levels remained relatively stable during the first 5 days, a substantial decrease was observed by Day 10 for all fertilizers and doses, providing insights into the spinach's nitrate content over a 10-day storage period. Conclusion: For rapid early growth and potentially higher yields, AS may be suitable at moderate doses (200 mg kg-1). SRAS offers a more balanced approach, promoting sustained growth while potentially reducing NO3 - accumulation compared to AS. Yeast residue, with its slow nitrogen release and consistently low NO3 - levels, could be a viable option for organic spinach production.
Subject(s)
Fertilizers , Nitrates , Nitrogen , Spinacia oleracea , Fertilizers/analysis , Spinacia oleracea/growth & development , Spinacia oleracea/chemistry , Spinacia oleracea/drug effects , Spinacia oleracea/metabolism , Nitrates/administration & dosage , Nitrates/pharmacology , Nitrates/analysis , Nitrates/metabolism , Nitrogen/metabolism , Plant Leaves/drug effects , Plant Leaves/chemistry , Plant Leaves/metabolism , Plant Leaves/growth & developmentABSTRACT
In agriculture, hydrogels can be addressed for effective operation of water and controlled-release fertilizers. Hydrogels have a significant ability for retaining water and improving nutrient availability in soil, enhancing plant growth while reducing water and fertilizer usage. This work aimed to prepare a hydrogel composite based on microalgae and biopolymers including chitosan and starch for use as a soil conditioner. The hydrogel composite was characterized by FTIR, XRD, and SEM. All hydrogel properties were studied including swelling degree, biodegradability, water-holding capacity, water retention, and re-swelling capacity in soil and water. The urea fertilizer loading and releasing behavior of the prepared hydrogels were investigated. The results revealed that the range of the maximal urea loading was between 99 and 440%, and the kinetics of loading was fitted with Freundlich model. The urea release % exhibited 78-95%, after 30 days, and the kinetics of release was fitted with zero-order, Higuchi, and Korsmeyer-Peppas models. Furthermore, the prepared hydrogels obtained a significant water-holding capacity, after blending soil (50 g) with small amount of hydrogels (1 g), the capacity increased in the range of 99.4-101.5%. In sum, the prepared hydrogels have the potential to be applied as a soil conditioner.
Subject(s)
Fertilizers , Hydrogels , Microalgae , Urea , Fertilizers/analysis , Hydrogels/chemistry , Urea/chemistry , Microalgae/chemistry , Delayed-Action Preparations/chemistry , Kinetics , Water/chemistry , Soil/chemistry , Chitosan/chemistry , Starch/chemistryABSTRACT
This study is to examine zinc exchanged montmorillonite (Zn-MMT) as a potential slow release nanofertilizer for rice crop. The effective intercalation of zinc within the montmorillonite inter layers was firmly established via analytical techniques including Zeta potential, FE-SEM (Field Emission Scanning Electron Microscopy) with Energy Dispersive X-ray Analysis (EDAX), Transmission Electron Microscope (TEM), X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). The efficacy of Zn-MMT was examined by evaluating its ability to facilitate controlled zinc release, as confirmed through an incubation study. Subsequently, the kinetics of zinc release was analyzed by different mathematical models such as Zero-order kinetics, First-order kinetics, the Higuchi model, and the Korsmeyer-Peppas model. From the pot culture study spanning 90 days the results indicated that Zn-MMT had significantly high plant height, Leaf Area Index (LAI), Dry Matter Production (DMP), number of tillers per hill, panicles length, increased grain and straw yield, in comparison with conventional zinc sulphate (ZnSO4). Total phenol, total protein and total chlorophyll content were significantly at higher levels with Zn-MMT treated rice crops as compared to conventional fertilizers and control. A similar trend was seen with phytochemicals such as Indole Acetic Acid (IAA), Superoxide Dismutase (SOD) and Carbonic Anhydrase (CA). Notably, rice grains harvested from Zn-MMTtreated crops exhibited significantly higher zinc content than those using other treatments. This Zn-MMT can be confirmed as a better alternative to conventional zinc sulphate fertilizers owing to its slow-release of nutrient into the soil and thus increased zinc use efficiency.
Subject(s)
Bentonite , Fertilizers , Oryza , Zinc , Oryza/metabolism , Bentonite/metabolism , Zinc/metabolism , Clay/chemistry , Spectroscopy, Fourier Transform InfraredABSTRACT
Chinese yam production is thriving in Aomori Prefecture, a cold and snowy region in Japan. Recently, there has been an increasing risk of nitrogen leaching in Chinese-yam fields, which consist of sandy soil, due to localized torrential rain. The relationships between the type of fertilizer used for Chinese-yam cultivation, the amount of nitrogen (N) leaching, and the timing of leaching remain unknown. Therefore, this study aimed to fill this knowledge gap by investigating the effects of different fertilizers (fast-acting and/or slow-release fertilizer) and irrigation practices (conventional and/or excessive irrigation) in order to mitigate the detrimental impact of nitrogen leaching on groundwater quality. An enhanced mathematical model and the spatiotemporal dynamics of inorganic nitrogen concentration in soil pore water were evaluated the negative impact of nitrogen leaching on the groundwater environment was evaluated. The results showed that the combined use of slow-release fertilizers could significantly reduce nitrate-nitrogen concentration in soil-water, especially during the harvest season. This study demonstrated that cultivating Chinese yam with a fertilizer application system that includes the use of slow-release fertilizer can diminish the negative impact of nitrogen leaching on the groundwater environment, contributing to our understanding of sustainable agricultural practices in regions facing similar environmental challenges. Therefore, our findings represent an important advancement providing new approaches to maintaining productivity while mitigating the adverse impacts on groundwater environments, as well as offering guidelines for agricultural practices in regions facing similar environmental challenges.
ABSTRACT
The urgent concerns of controlling water body eutrophication and the alleviating phosphorus shortage have led to an urgent need for action. The removal of phosphate from polluted waters and its reuse are essential for the prevention of eutrophication and for the sustainable utilization of phosphate resources. In this study, modified attapulgite with different Ca:Mg molar ratios was synthesized to facilitate the recovery of phosphate, with subsequent use of soil fertilizer. Ca-Mg modified attapulgite with the optimal ratio (ACM-5:3) exhibited an exceptional adsorption quality, achieving a maximum adsorption capacity of 63.2 mg/g. The pseudo-second-order model and Langmuir model could well describe the adsorption kinetics and isotherms, respectively. The adsorption mechanism analyses suggested that the interaction between ACM-5:3 and phosphate depended mainly on ion exchange and electrostatic attraction. Moreover, phosphate-laden-ACM-5:3 demonstrated a significant potential as a phosphorus-releasing fertilizer. It could promote corn growth by ensuring a continuous supply of phosphorus and minimizing phosphorus runoff losses. The above results suggested that ACM-5:3 was a potential adsorbent for efficient phosphate removal and recovery.
Subject(s)
Phosphates , Silicon Compounds , Water Pollutants, Chemical , Fertilizers , Magnesium Compounds , Phosphorus , Adsorption , Kinetics , Water Pollutants, Chemical/analysisABSTRACT
Recently, replacing chemical fertilizers with straw returning and new fertilizers has received considerable attention in the agricultural sector, as it is believed to increase rice yield and improve soil properties. However, less is known about rice growth and soil properties in paddy fields with the addition of different fertilizers. Thus, in this paper, we investigated the effects of different fertilizer treatments, including no fertilization (CK), optimized fertilization based on the medium yield recommended fertilizer amount (OF), 4.50 Mg ha-1 straw returning with chemical fertilizers (SF), 0.59 Mg ha-1 slow-release fertilizer with chemical fertilizers (SRF), and 0.60 Mg ha-1 water-soluble fertilizer with chemical fertilizers (WSF), on rice growth, yield, and soil properties through a field experiment. The results show that compared with the OF treatment, the new SF, SRF, and WSF treatments increased plant height, main root length, tiller number, leaf area index, chlorophyll content, and aboveground dry weight. The SF, SRF, and WSF treatments improved rice grain yield by 30.65-32.51% and 0.24-1.66% compared to the CK and OF treatments, respectively. The SRF treatment increased nitrogen (N) and phosphorus (P) uptake by 18.78% and 28.68%, the harvest indexes of N and P by 1.75% and 0.59%, and the partial productivity of N and P by 2.64% and 2.63%, respectively, compared with the OF treatment. However, fertilization did not significantly affect the average yield, harvest indexes of N and P, and partial productivity of N and P. The contents of TN, AN, SOM, TP, AP, and AK across all the treatments decreased significantly with increasing soil depth, while soil pH increased with soil depth. The SF treatment could more effectively increase soil pH and NH4+-N content compared to the SRF and WSF treatments, while the SRF treatment could greatly enhance other soil nutrients and enzyme activities compared to the SF and WSF treatments. A correlation analysis showed that rice yield was significantly positively associated with tiller number, leaf area index, chlorophyll, soil NO3--N, NH4+-N, SOM, TP, AK, and soil enzyme activity. The experimental results indicate that SRF was the best fertilization method to improve rice growth and yield and enhance soil properties, followed by the SF, WSF, and OF treatments. Hence, the results provide useful information for better fertilization management in the Chaohu Lake region of China.
ABSTRACT
A new adsorbent called iron-magnesium oxide coupled lignite (CIMBC) was developed to address the challenges of recovering high concentrations of ammonia nitrogen and phosphate in livestock farm wastewater and improving the inefficient use of lignite (BC) with low calorific value. CIMBC was synthesized using the modified ferromagnesium salt double-coating method. The experiments demonstrated that Fe2O3 and MgO could be effectively loaded onto the surface of BC at a Fe/Mg molar ratio of 1:2 and pyrolysis temperature of 500 °C. The optimal conditions for adsorption were determined to be an N/P concentration ratio of 2:1, adsorbent dosage of 1 g/L, and pH of 7. The presence of coexisting cations (Ca2+ and Mg2+) inhibited the removal of ammonia nitrogen but enhanced the removal of phosphate. Likewise, the presence of coexisting anions (CO32- and SO42-) hindered the removal of both ammonia nitrogen and phosphate. The adsorption behavior followed the pseudo-second-order model and the Langmuir model, with a maximum adsorption capacity of 95.69 mg N/g for ammonia nitrogen and 101.32 mg P/g for phosphate. The adsorption process was a spontaneous endothermic process controlled by multiple levels. The main mechanisms of adsorption involved electrostatic attraction, intra-particle diffusion, ion exchange, chemical precipitation, and coordination exchange. After 5 times of adsorption-desorption, the recovery rate of CIMBC is less than 50%, and the removal rate of phosphate is less than 40%. Although the RCIMBC exhibited low reusability, but also it showed potential in removing heavy metals (Pb) from wastewater and for use as a slow-release fertilizer. CIMBC is a promising new adsorbent, which can realize resource utilization of lignite with low calorific value while removing nitrogen and phosphorus.
Subject(s)
Ferric Compounds , Magnesium Oxide , Water Pollutants, Chemical , Animals , Phosphates , Magnesium , Wastewater , Iron , Ammonia , Livestock , Coal , Farms , Adsorption , Nitrogen , KineticsABSTRACT
To solve the problem of shortage of agricultural water resources and low utilization rate of fertilizer, a slow-release fertilizer based on chitosan modified water retention function was developed. Solution polymerization and semi-interpenetrating network technology were used to load urea aldehyde into carboxymethyl chitosan superabsorbent resin network. This technology realizes the simultaneous slow release of nutrients and water by using modified chitosan, which has important implications for the application of chitosan in agriculture to regulate the soil water and fertilizer conditions. The optimal preparation conditions were: MBA 0.07 %, KPS 0.8 %, AM to AA mass ratio of 0.3:1, CMC content of 10 %, AA neutralization degree 85 %, UF 20 %, AA+AM mass sum of 10 g, reaction temperature 70 °C and reaction time 2 h. The maximum water absorption rate of the optimized NC reached 172.3 g/g. The cumulative release of nitrogen in 30 days was 83.67 %. The application of NC in sandy soil promoted seed germination and growth. The comprehensive results indicate that NC has broad application prospects in arid areas based on its excellent water retention and nutrient release performance.
ABSTRACT
The development of alginate-based composites in agriculture to combat nutrient loss and drought for sustainable development has drawn increasing attention in the scientific community. Existing studies are however scattered, and the retention and slow-release mechanisms of alginate-based composites are not well understood. This paper systematically reviews the current literature on the preparation, characterization, and agricultural applications of various alginate-based composites. The synthesis methods of alginate-based composites are firstly summarized, followed by a review of available analytical techniques to characterize alginate-based composites for the attainment of their desired performance. Secondly, the performance and controlling factors for agricultural applications of alginate-based composites are discussed, including aquasorb, slow-release fertilizer, soil amendment, microbial inoculants, and controlled release of pesticides for pest management. Finally, suggestions and future perspectives are proposed to expand the applications of alginate-based composites for sustainable agriculture.
Subject(s)
Agricultural Inoculants , Pesticides , Soil , Alginates , Agriculture/methods , Fertilizers/analysisABSTRACT
Zinc (Zn) deficiency has caused nutritional disorders in 17% of the world's population; thus, producing Zn-enriched plants as a dietary source is necessary. Recently, nanofertilizers have gained much attention as a substitute for conventional fertilizers; however, soil application of polymer-coated Zn-based nanofertilizer has not been explored much. The present study depicts the green synthesis of ZnO nanoparticles using Melia azedarach L. leaf extract, whose phytoconstituents have reducing abilities. The synthesized nanoparticles were combined with gum acacia (GA) to form a ZnOGA nanocomposite. The structural and morphological properties of ZnOGA were studied using XRD, FTIR, FESEM, and EDX. A pot experiment study was carried out with Spinacia oleracea L. at various doses (3, 5, and 10 mg/kg) of the synthesized ZnOGA to evaluate its effectiveness as a slow-release fertilizer and was compared with a commercial Zn fertilizer. The plant growth studies revealed a significant increase in the phyto-morphological traits of the plants fertilized with ZnOGA compared to commercial fertilizer. The plants also displayed significantly higher contents of protein (17-47%), phenols (25-60%), proline (82-94%), total soluble sugar (20-31%), DPPH activity (70-72%), and Zn uptake (91-106%). The doses of ZnOGA played an imperative role in determining the growth and productivity of the plant. Soil column studies showed that ZnOGA reduces Zn leaching by 52% compared to commercial Zn fertilizer. This study signifies the potential of ZnOGA to be applied as an eco-friendly and sustainable substitute for conventional Zn fertilizer minimizing Zn losses and Zn deficiency-related health problems in human populations.
Subject(s)
Zinc Oxide , Humans , Zinc Oxide/pharmacology , Zinc Oxide/chemistry , Zinc/metabolism , Fertilizers/analysis , Spinacia oleracea/metabolism , Gum Arabic , Soil/chemistryABSTRACT
Nutrient recovery from wastewater not only reduces the nutrient load on water resources but also alleviates the environmental problems in aquatic ecosystems, which is a solution to achieve a sustainable society. Besides, struvite crystallization technology is considered a potential nutrient recovery technology because the precipitate obtained can be reused as a slow-release fertilizer. This review presents the basic properties of struvite and the theory of the basic crystallization process. In addition, the possible influencing variables of the struvite crystallization process on the recovery efficiency and product purity are also examined in detail. Then, the advanced auxiliary technologies for facilitating the struvite crystallization process are systematically discussed. Moreover, the economic and environmental benefits of the struvite crystallization process for nutrient recovery are introduced. Finally, the shortcomings and inadequacies of struvite crystallization technology are presented, and future research prospects are provided. This work serves as the foundation for the future use of struvite crystallization technology to recover nutrients in response to the increasingly serious environmental problems and resource depletion.
Subject(s)
Phosphates , Wastewater , Struvite/chemistry , Phosphorus/chemistry , Crystallization , Ecosystem , Nutrients , Waste Disposal, FluidABSTRACT
Excessive ammonium and phosphate in aquatic settings may produce major eutrophication. Adsorbents can be used to reduce the eutrophication of natural water bodies. In this study, a sustainable and efficient ceramic adsorbent (sludge/biomass ash ceramsite [SBC]) was prepared by using sludge and biomass ash with a weight ratio of 1:1; the sintering parameters were 1070°C for 15 min. The NH4 + -N and P adsorption capabilities were improved by utilizing 1 mol L-1 NaOH and 1.6 mol L-1 La(NO3 )3 ·6H2 O for modification. When the pH and duration were 7 and 1440 min, respectively, the maximum bending capacity of ammonia nitrogen and phosphorus was 3.2 and 2.1 mg g-1 at 308 K. The pseudo-second-order kinetic model better describes the adsorption dynamics of NH4 + -N and P, whereas the Langmuir model better describes the adsorption isotherm models of NH4 + -N and P. The adsorption mechanism of SBC-NaOH on NH4 + -N is ion exchange between Na+ and NH4 + , whereas the adsorption mechanism of SBC-La on phosphorus is ion exchange and La3+ adsorption. SBC combines efficient wastewater purification with the reuse of solid waste. The findings gave rise to the possibility of recycling ceramics as a plant fertilizer with a delayed release in the future. PRACTITIONER POINTS: New ceramsite was made from sludge and biomass ash. NH4 + -N (3.2 mg g-1 ) and P (2.1 mg g-1 ) were effectively adsorbed by ceramsite. The mechanism of NH4 + -N and P adsorption by ceramsite was studied. Absorbed ceramsite can be used as slow-release fertilizer in plant cultivation.
Subject(s)
Wastewater , Water Pollutants, Chemical , Sewage , Phosphorus , Nitrogen , Adsorption , Biomass , Fertilizers , Sodium Hydroxide , KineticsABSTRACT
Soil nutrient availability and non-biodegradation of some polymer-based slow-release fertilizers (SRFs) have a direct impact on crop production and soil ecological quality. Proper fertilization practices can lead to obviating adverse effects of over-fertilization on soil nutrients and, consequently, on crop yields. This work aims to assess the effect of a durable liner material based on biodegradable polymers on soil nutrient availability and tomato growth. For this purpose, Chitosan composite (CsGC) was adopted as a durable coating material, including clay as a reinforcing coating material. The influence of chitosan composite coating (CsGC) on the sustained nutrient release of coated NPK fertilizer (NPK/CsGC) was studied. Scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDX) were used to examine the coated NPK granules. Results revealed that the proposed coating film improved the mechanical strength of the NPK fertilizer and enhanced water retention capacity of the soil. The agronomic investigation has also proved their outstanding potential to boost chlorophyll content, biomass, and tomato metabolism. Furthermore, the surface response study confirmed a strong correlation between tomato quality and representative soil nutrients. Therefore, kaolinite clay, as part of the coating system, can be an effective way to improve tomato quality and maintain soil nutrients during tomato ripening.
Subject(s)
Chitosan , Solanum lycopersicum , Soil/chemistry , Clay , Fertilizers/analysis , Kaolin , Polymers , Nutrients , Nitrogen/chemistryABSTRACT
Modern agriculture presents new requirements of low cost, high water retention and degradability for superabsorbent and slow-release fertilizers. In this study, carrageenan (CG), acrylic acid (AA), N, N '-methylene diacrylamide (MBA), urea and ammonium persulfate (APS) were used as raw materials. A kind of high water absorption, water retention, nitrogen slow release and biodegradable carrageenan superabsorbent (CG-SA) was prepared by grafting copolymerization. The optimal CG-SA was obtained with a water absorption rate of 680.45 g/g by orthogonal L18(3)7 experiments and single-factor experiments. The water absorption behavior of CG-SA in deionized water and salt solution were studied. The CG-SA was characterized before and after degradation by FTIR, SEM. The nitrogen release behavior and kinetic characteristics of CG-SA were investigated. In addition, CG-SA degraded 58.33 % and 64.35 % in soil at 25 °C and 35 °C after 28 days. All the results indicated that the low-cost and degradable CG-SA can achieve simultaneous slow release of water and nutrients, which is expected to be widely used as a new water-fertilizer integration technology in arid and poor areas.
Subject(s)
Fertilizers , Urea , Carrageenan , Fertilizers/analysis , Nitrogen , Soil , WaterABSTRACT
Coating slow-release fertilizers (CSRFs) have gained significant attention for their potential to improve nutrient utilization efficiency and prevent environmental pollution through mitigating soil and water contamination. This study developed a novel wood waste-derived composition as a bio-coating material for urea slow-release by integrating modified lignin (PCL) and activated biochar (ABC). PCL was prepared by grafting palmitoyl chloride (PC) with hydrophobic groups to the lignin via an esterification reaction. ABC with a high surface area and hierarchically porous structure created rich channels for ion transportation. These results increased the water-retention ability with a reduced absorbing/expelling rate and confer an excellent Cr(VI) adsorption capacity to the PCL and ABC hybrid coating material (PCL/ABC). The as-prepared PCL/ABC-based CSRF (PCL/ABC-CSRF) showed improving fertilizer slow-release properties for real application (nitrogen release persistence for 40 days at soil). The rice (Oryza sativa L.) hydroponics study suggested that such novel PCL/ABC was conducive to the rice growth in micro metallic contaminated hydroponics by eliminating the accumulation of chromium metal in rice roots. Overall, this study provides an attractive platform for developing biodegradable, heavy-metal adsorbable, and high-efficient CSRFs and a feasible and effective way for functionalized utilization of wood waste.
Subject(s)
Fertilizers , Oryza , Fertilizers/analysis , Lignin , Porosity , Wood/chemistry , Charcoal/chemistry , Water/chemistry , Soil/chemistry , Nitrogen/chemistryABSTRACT
To address the global phosphorus crisis and solve the problem of eutrophication in water bodies, the recovery of phosphate from wastewater for use as a slow-release fertilizer and to improve the slow-release performance of fertilizers is considered an effective way. In this study, amine-modified lignin (AL) was prepared from industrial alkali lignin (L) for phosphate recovery from water bodies, and then the recovered phosphorus-rich aminated lignin (AL-P) was used as a slow-release N and P fertilizer. Batch adsorption experiments showed that the adsorption process was consistent with the Pseudo-second-order kinetics and Langmuir model. In addition, ion competition and actual aqueous adsorption experiments showed that AL had good adsorption selectivity and removal capacity. The adsorption mechanism included electrostatic adsorption, ionic ligand exchange and cross-linked addition reaction. In the aqueous release experiments, the rate of nitrogen release was constant and the release of phosphorus followed a Fickian diffusion mechanism. Soil column leaching experiments showed that the release of N and P from AL-P in soil followed the Fickian diffusion mechanism. Therefore, AL recovery of aqueous phosphate for use as a binary slow-release fertilizer has great potential to improve the environment of water bodies, enhance nutrient utilization and address the global phosphorus crisis.