Sweet tea extract encapsulated by different wall material combinations with improved physicochemical properties and bioactivity stability.

Aim: To prepare sweet tea extract microcapsules (STEMs) via a spray-drying by applying different wall material formulations with maltodextrin (MD), inulin (IN), and gum arabic (GA). Methods: The microcapsules were characterised by yield, encapsulation efficiency (EE), particle size, sensory evaluation, morphology, attenuated total reflectance-Fourier transform infra-red spectroscopy and in vitro digestion studies. Results: The encapsulation improved the physicochemical properties and bioactivity stability of sweet tea extract (STE). MD5IN5 had the highest yield (56.33 ± 0.06% w/w) and the best EE (e.g. 88.84 ± 0.36% w/w of total flavonoids). MD9GA1 obtained the smallest particle size (642.13 ± 4.12 nm). MD9GA1 exhibited the highest retention of bioactive components, inhibition of α-glucosidase (96.85 ± 0.55%), α-amylase (57.58 ± 0.99%), angiotensin-converting enzyme (56.88 ± 2.20%), and the best antioxidant activity during in vitro gastrointestinal digestion. Conclusion: The encapsulation of STE can be an appropriate way for the valorisation of STE with improved properties.

Plant and animal protein mixed systems as wall material for microencapsulation of Manuka essential Oil: Characterization and in vitro release kinetics.

Combination of plant and animal protein diet is becoming a valuable source of nutrition in the modern diet due to the synergistic functional properties inherent in these protein complexes. Moreover, the synergy between animal and plant proteins can contribute to the high stability and improved solubility of the encapsulated bioactive ingredients (e.g., essential oils). Therefore, the study was designed to evaluate the plant (pea protein (PP) and lupine protein (LP)) and animal protein (whey protein, WP) mixed systems as a wall material for microencapsulation of manuka essential oil, as an example of bioactive compound. Moreover, physicochemical properties and in vitro release profile of encapsulated manuka essential oil were studied. Manuka essential oil microcapsules exhibited low moisture content (5.3-7.1 %) and low water activity (0.33-0.37) with a solubility of 53.7-68.1 %. Change in wall material ratio significantly affected the color of microcapsules, while microcapsules prepared with 1:1 protein/oil ratio demonstrated a high encapsulation efficiency (90.4 % and 89.4 %) for protein mixed systems (PP + WP and LP + WP), respectively. Microcapsules further showed low values for lipid oxidation with a high oxidative stability and antioxidant activity (62.1-87.0 %). The zero order and Korsmeyer-Peppas models clearly explained the release mechanism of encapsulated oil, which was dependent on the type and concentration of the protein mixed used. The findings demonstrated that the protein mixed systems successfully encapsulated the manuka essential oil with controlled release and high oxidative stability, indicating the suitability of the protein mixed systems as a carrier in encapsulation and application potential in development of encapsulated functional foods.

Preliminary Assessment of Tara Gum as a Wall Material: Physicochemical, Structural, Thermal, and Rheological Analyses of Different Drying Methods.

Tara gum, a natural biopolymer extracted from Caesalpinia spinosa seeds, was investigated in this study. Wall materials were produced using spray drying, forced convection, and vacuum oven drying. In addition, a commercial sample obtained through mechanical methods and direct milling was used as a reference. The gums exhibited low moisture content (8.63% to 12.55%), water activity (0.37 to 0.41), bulk density (0.43 to 0.76 g/mL), and hygroscopicity (10.51% to 11.42%). This allows adequate physical and microbiological stability during storage. Polydisperse particles were obtained, ranging in size from 3.46 µm to 139.60 µm. Fourier transform infrared spectroscopy characterisation confirmed the polysaccharide nature of tara gum, primarily composed of galactomannans. Among the drying methods, spray drying produced the gum with the best physicochemical characteristics, including higher lightness, moderate stability, smaller particle size, and high glass transition temperature (141.69 °C). Regarding rheological properties, it demonstrated a non-Newtonian pseudoplastic behaviour that the power law could accurately describe. The apparent viscosity of the aqueous dispersions of the gum decreased with increasing temperature. In summary, the results establish the potential of tara gum as a wall material applicable in the food and pharmaceutical industries.

Balanced Thermal Insulation, Flame-Retardant and Mechanical Properties of PU Foam Constructed via Cost-Effective EG/APP/SA Ternary Synergistic Modification.

To address the challenge of balancing the mechanical, thermal insulation, and flame-retardant properties of building insulation materials, this study presented a facile approach to modify the rigid polyurethane foam composites (RPUFs) via commercial expandable graphite (EG), ammonium polyphosphate (APP), and silica aerogel (SA). The resulting EG/APP/SA/RPUFs exhibited low thermal conductivity close to neat RPUF. However, the compressive strength of the 6EG/2APP/SA/RPUF increased by 49% along with achieving a V-0 flame retardant rating. The residual weight at 700 °C increased from 19.2 wt.% to 30.9 wt.%. Results from cone calorimetry test (CCT) revealed a 9.2% reduction in total heat release (THR) and a 17.5% decrease in total smoke production (TSP). The synergistic flame-retardant mechanism of APP/EG made significant contribution to the excellent flame retardant properties of EG/APP/SA/RPUFs. The addition of SA played a vital role in reducing thermal conductivity and enhancing mechanical performance, effectively compensating for the shortcomings of APP/EG. The cost-effective EG/APP/SA system demonstrates a positive ternary synergistic effect in achieving a balance in RPUFs properties. This study provides a novel strategy aimed at developing affordable building wall insulation material with enhanced safety features.

Study on Microstructure and High Temperature Stability of WTaVTiZrx Refractory High Entropy Alloy Prepared by Laser Cladding.

The extremely harsh environment of the high temperature plasma imposes strict requirements on the construction materials of the first wall in a fusion reactor. In this work, a refractory alloy system, WTaVTiZrx, with low activation and high entropy, was theoretically designed based on semi-empirical formula and produced using a laser cladding method. The effects of Zr proportions on the metallographic microstructure, phase composition, and alloy chemistry of a high-entropy alloy cladding layer were investigated using a metallographic microscope, XRD (X-ray diffraction), SEM (scanning electron microscope), and EDS (energy dispersive spectrometer), respectively. The high-entropy alloys have a single-phase BCC structure, and the cladding layers exhibit a typical dendritic microstructure feature. The evolution of microstructure and mechanical properties of the high-entropy alloys, with respect to annealing temperature, was studied to reveal the performance stability of the alloy at a high temperature. The microstructure of the annealed samples at 900 °C for 5-10 h did not show significant changes compared to the as-cast samples, and the microhardness increased to 988.52 HV, which was higher than that of the as-cast samples (725.08 HV). When annealed at 1100 °C for 5 h, the microstructure remained unchanged, and the microhardness increased. However, after annealing for 10 h, black substances appeared in the microstructure, and the microhardness decreased, but it was still higher than the matrix. When annealed at 1200 °C for 5-10 h, the microhardness did not increase significantly compared to the as-cast samples, and after annealing for 10 h, the microhardness was even lower than that of the as-cast samples. The phase of the high entropy alloy did not change significantly after high-temperature annealing, indicating good phase stability at high temperatures. After annealing for 10 h, the microhardness was lower than that of the as-cast samples. The phase of the high entropy alloy remained unchanged after high-temperature annealing, demonstrating good phase stability at high temperatures.

Fabrication and characterization of complex coacervates utilizing gelatin and carboxymethyl starch.

BACKGROUND: Modified polysaccharides have greatly expanded applications in comparison with native polysaccharides due to their improved compatibility and interactions with proteins and active compounds in food-related areas. Nonetheless, there is a noticeable dearth of research concerning the utilization of carboxymethyl starch (CMS) as a microcapsule wall material in food processing, despite its common use in pharmaceutical delivery. The development of an economical and safe embedding carrier using CMS and gelatin (GE) holds immense importance within the food-processing industry. In this work, the potential of innovative coacervates formed by the combination of GE and CMS as a reliable, stable, and biodegradable embedding carrier is evaluated by turbidity measurements, thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and rheological measurements. RESULTS: The results indicate that GE-CMS coacervates primarily resulted from electrostatic interactions and hydrogen bonding. The optimal coacervation was observed at pH 4.6 and with a GE/CMS blend ratio of 3:1 (w/w). However, the addition of NaCl reduced coacervation and made it less sensitive to temperature changes (35-55 °C). In comparison with individual GE or CMS, the coacervates exhibited higher thermal stability, as shown by TGA. X-ray diffraction analysis shows that the GE-CMS coacervates maintained an amorphous structure. Rheological testing reveals that the GE-CMS coacervates exhibited shear-thinning behavior and gel-like properties. CONCLUSION: Overall, attaining electroneutrality in the mixture boosts the formation of a denser structure and enhances rheological properties, leading to promising applications in food, biomaterials, cosmetics, and pharmaceutical products. © 2023 Society of Chemical Industry.

Utilization of gallic acid-crosslinked soy proteins as wall material for chia oil microencapsulation.

BACKGROUND: Chia oil represents the vegetable source with the highest content of omega-3 fatty acids. However, the incorporation of polyunsaturated fatty acids into food is limited due to their susceptibility toward oxidation. This investigation aimed to study the microencapsulation of chia oil (CO), using gallic acid (GA) crosslinked-soy protein isolate (SPI) as a wall material and its effect on its oxidative stability. RESULTS: Microcapsules presented a moisture content, water activity, and encapsulation efficiency of around 2.95-4.51% (wet basis); 0.17 and 59.76-71.65%, respectively. Rancimat tests showed that with higher GA content, the induction period increased up to 27.9 h. The storage test demonstrated that the microencapsulated oil with crosslinked wall material has lower values of hydroperoxides and higher induction times concerning the non-crosslinked oil. Finally, the fatty acid profile at this storage time indicated that microcapsules with GA did not have significant changes. In vitro digestion exhibited a reduction in the percentage of bioavailable oil for crosslinked microcapsules, but with no variations in its chemical quality, and an increase in the total polyphenols amount and antioxidant activity. CONCLUSION: The results obtained demonstrated that the microencapsulation of CO using SPI crosslinked with GA as wall material exerted a very important protective effect since a synergistic effect could be described between the microencapsulation effect and the antioxidant power of GA. © 2023 Society of Chemical Industry.

Wall Materials for Encapsulating Bioactive Compounds via Spray-Drying: A Review.

Spray-drying is a continuous encapsulation method that effectively preserves, stabilizes, and retards the degradation of bioactive compounds by encapsulating them within a wall material. The resulting capsules exhibit diverse characteristics influenced by factors such as operating conditions (e.g., air temperature and feed rate) and the interactions between the bioactive compounds and the wall material. This review aims to compile recent research (within the past 5 years) on spray-drying for bioactive compound encapsulation, emphasizing the significance of wall materials in spray-drying and their impact on encapsulation yield, efficiency, and capsule morphology.

Recent Progress in Microencapsulation of Active Peptides-Wall Material, Preparation, and Application: A Review.

Being a natural active substance with a wide variety of sources, easy access, significant curative effect, and high safety, active peptides have gradually become one of the new research directions in food, medicine, agriculture, and other fields in recent years. The technology associated with active peptides is constantly evolving. There are obvious difficulties in the preservation, delivery, and slow release of exposed peptides. Microencapsulation technology can effectively solve these difficulties and improve the utilization rate of active peptides. In this paper, the commonly used materials for embedding active peptides (natural polymer materials, modified polymer materials, and synthetic polymer materials) and embedding technologies are reviewed, with emphasis on four new technologies (microfluidics, microjets, layer-by-layer self-assembly, and yeast cells). Compared with natural materials, modified materials and synthetic polymer materials show higher embedding rates and mechanical strength. The new technology improves the preparation efficiency and embedding rate of microencapsulated peptides and makes the microencapsulated particle size tend to be controllable. In addition, the current application of peptide microcapsules in different fields was also introduced. Selecting active peptides with different functions, using appropriate materials and efficient preparation technology to achieve targeted delivery and slow release of active peptides in the application system, will become the focus of future research.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization.

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Multi-microscopy techniques combined with FT-IR spectroscopy reveals the histological and biochemical causes leading to fruit texture difference in oriental melon (Cucumis melo var. Makuwa Makino).

Multi-microscopy techniques and Fourier transform infrared (FT-IR) spectroscopy were used in this study to investigate the intrinsic causes leading to fruit texture difference between two cultivars of oriental melon 'HDB' (crisp) and 'HPM' (mealy). On the histological aspect, orderly arranged regular-shaped cells with tissue natural fracture pattern showed cell rupture in 'HDB' versus loosely arranged irregular-shaped cells with tissue natural fracture pattern showed cell-to-cell separation in 'HPM' of sarcocarp are histological causes for crisp and mealy fruit texture, respectively. On the biochemical aspect, FT-IR spectra (4000-850 cm-1) of sarcocarp tissue cell wall materials (CWM) happened a dramatic change at the mature stage in 'HPM', but not in 'HDB'. Insightly, the lower de-methyl-esterified homogalacturonan (HG) abundance with higher water-soluble pectin (WSP) ratio and lower hemicellulose (HC) content contribute a poor intercellular adhesion in 'HPM' middle lamella (ML) at the mature stage compared to 'HDB'.

Evaluation of the microencapsulation process of conidia of Trichoderma asperellum by spray drying.

Microencapsulation of microorganisms has been studied to increase product shelf life and stability to enable the application in sustainable agriculture. In this study, the microencapsulation of Trichoderma asperellum conidia by spray drying (SD) was evaluated. The objective was to assess the effect of drying air temperature and wall material (maltodextrin DE20, MD20) concentration on the microencapsulation and to identify the optimum conditions to produce, in high yield, microparticles with low moisture, high conidial viability and conidial survival. Microparticles were characterized in terms of morphology, particle size, and shelf life. A central composite rotatable design (CCRD) was used to evaluate the effect of operating parameters on drying yield (DY), moisture content, conidial viability (CV), and conidial survival (SP). Microencapsulation experiments were carried out under optimum conditions to validate the obtained model. The optimum temperature and MD20/conidia dry weight ratios were 80 °C and 1:4.5, respectively, which afforded a drying yield of 63.85 ± 0.86%, moisture content of 4.92 ± 0.07%, conidial viability of 87.10 ± 1.16%, and conidial survival of 85.78 ± 2.88%. Microencapsulation by spray drying using MD20 as wall material extended the viability of conidia stored at 29 °C compared with the control. The mathematical models accurately predicted all the variables studied, and the association of the microencapsulation technique using DE20 maltodextrin was able to optimize the process and increase the product's shelf life. It was also concluded that high inlet air temperatures negatively affected conidia survival, especially above 100 °C.

Effect of Whey Protein Purity on the Characteristics of Algae Oil-Loaded Encapsulates Obtained by Electrospraying Assisted by Pressurized Gas.

In this paper, the effect of protein purity in three different whey protein grades on the characteristics of algae oil encapsulates obtained via room-temperature electrospraying assisted by pressurized gas (EAPG) encapsulation process was studied. Three different commercial grades of whey protein purity were evaluated, namely 35, 80, and 90 wt.%. Oil nanodroplets with an average size of 600 nm were homogeneously entrapped into whey protein microparticles 3 µm in size. However, the sphericity and the surface smoothness of the microparticles increased by increasing the protein purity in the grades of whey protein studied. The porosity of the microparticles was also dependent on protein purity as determined by nitrogen adsorption-desorption isotherms, being smaller for larger contents of protein. Interestingly, the lowest extractable oil was obtained with WP35, probably due to the high content of lactose. The peroxide values confirmed the superior protective effect of the protein, obtaining the smallest peroxide value for WP90, a result that is consistent with its reduced porosity and with its lower permeability to oxygen, as confirmed by the fluorescence decay-oxygen consumption method. The accelerated stability assay against oxidation confirmed the higher protection of the WP80 and WP90. In addition, the increased content in protein implied a higher thermal stability according to the thermogravimetric analysis. These results further confirm the importance of the adequate selection of the composition of wall materials together with the encapsulation method.

Effects of Wall Material on Medium-Chain Triglyceride (MCT) Oil Microcapsules Prepared by Spray Drying.

A medium-chain triglyceride (MCT) oil microcapsule was prepared by spray drying. The effects of the wall-material parameters of wall-to-oil ratio (1:1 to 3:1) and type of wall material (gum arabic (GA), whey protein isolate (WPI), and octenyl succinic anhydride (OSA) starch) on the microcapsules were evaluated. The droplet size, size distribution, viscosity, zeta potential, and stability of the emulsions were measured. The spray-dried powder was characterized by its morphology, yield, encapsulation efficiency, and moisture content. The wall material influenced the characteristics of the emulsions and microcapsules. The formulation with a 2:1 wall-to-oil ratio and OSA starch/maltodextrin as the wall material resulted in a small droplet size (0.177 ± 0.002 µm) with high encapsulation efficiency (98.38 ± 0.01%). This formulation had good physical stability over three months under accelerated conditions. Thus, OSA starch/maltodextrin is an appropriate wall material for encapsulating MCT oil.

The effects of canthaxanthin microencapsulation on yolk color and canthaxanthin deposition in egg yolk of laying hens.

Canthaxanthin is widely used as a feed additive to improve skin and yolk color in poultry. It is insoluble in water and sensitive to oxidation, so commercial canthaxanthin is often microencapsulated with wall materials to improve its solubility and stability. The objective of this study was to evaluate the effects of canthaxanthin microencapsulation on yolk color and canthaxanthin deposition in egg yolk of laying hens. A total of 288 Hyline Brown laying hens (48 wk of age) were allocated to 4 groups with 6 replicates of 12 hens each, and fed a basal diet or the basal diet supplemented with 5 mg/kg canthaxanthin microencapsulated with modified starch (CMMS), gelatin (CMG), and sodium lignosulfonate (CMSL), respectively. Canthaxanthin supplementation did not affect laying performance of hens, but improved (P < 0.05) yolk color of fresh, fried, boiled, and stored (4 and 25°C) eggs. The improvement of yolk color of fresh eggs was greatest in the CMSL group and least in the CMG group (P < 0.05). Both CMMS and CMSL resulted in higher (P < 0.05) yolk canthaxanthin concentration than CMG. The CMSL resulted in higher (P < 0.05) yolk color score of fried eggs than CMMS and CMG and higher (P < 0.05) yolk color score of boiled eggs than CMG, but no difference was observed in stored eggs among three canthaxanthin groups. In conclusion, CMMS and CMSL were more effective in yolk pigmentation than CMG, and CMSL was slightly better than CMMS.

Betalains and their applications in food: The current state of processing, stability and future opportunities in the industry.

Betalains are water-soluble nitrogenous pigments with coloring properties and antioxidant activities, which is why they have been incorporated into several foods. However, their use is limited by their instability in response to different factors, such as, pH, oxygen, water activity, light, metals, among others. In this work, a review of up-to-date and relevant information is presented on the primary natural sources of betalains. Additionally, the advantages and disadvantages of the primary betalain extraction techniques are discussed and compared. The results of these studies were focused on the stability of betalains when incorporated into foods, either in pure or encapsulated form, and they are discussed through different technologies. Lastly, the most relevant information related to their stability and a projection of their promising future applications within the food industry is presented.

The role of mechanical collapse by cryogenic ball milling on the effect of high-pressure homogenization on the microstructural and texturizing properties of partially pectin-depleted tomato cell wall material.

In the current study, the effect of different particle size reduction techniques, namely high-pressure homogenization (HPH) and cryogenic ball milling (CBM), on the microstructural and texturizing properties of the tomato acid-unextractable fraction (AcUF) in suspension was studied. Partial pectin depletion was performed by nitric acid pectin extraction on the alcohol-insoluble residue. In the absence of the aforementioned mechanical treatments, the partially pectin-depleted material, i.e., the AcUF, showed a cellular morphology and a high texturizing potential. By short-time CBM in dry-state, the AcUF was extensively fractured and clumped, resulting in a collapsed structure with negligible texturizing potential and low water binding capacity. In contrast, HPH could disrupt the cell wall network (destroying the cellular morphology) resulting in a continuum of interacting material having very similar texturizing potential and a slightly higher water binding capacity than the AcUF before HPH. Furthermore, the potential of HPH to (re)functionalize the collapsed cryogenic ball milled AcUF by its shear-induced disruption was shown. Indeed, the debris-like cell wall remnants could to some extent be reopened by HPH, which resulted in a partial recovery of the original texturizing potential and an improved water binding capacity. However, the potential of HPH at 20 MPa to revert the detrimental effect of CBM decreased with increasing CBM treatment time.

Effect of the Olive Oil Extraction Process on the Formation of Complex Pectin-Polyphenols and Their Antioxidant and Antiproliferative Activities.

The aim of this research was to investigate the interaction of phenols and pectic polysaccharides during the olive oil extraction process. For this, pectin was extracted from fresh olive fruits and compared to the pectin isolated from the paste resulting from the extraction of the olive oil after milling with malaxation at 30 °C/30 min and subsequent centrifugation of the olive paste from the same lot of olive fruits in a system called ABENCOR (AB). The results indicate that these interactions were enhanced during the olive oil extraction process. In addition, the resulting AB extracts exhibited high antioxidant activity (ORAC) and strong antiproliferative activity in vitro against colon carcinoma Caco-2 cell lines compared to olive fruit extracts. The polyphenols associated mainly with the acidic pectin substance, with a higher content in AB extracts, seem to be responsible for these activities, and appear to maintain their activities in part after complexation. However, even in olive fruit extracts with smaller amounts of phenols in their compositions, pectic polysaccharides may also be involved in antioxidant and antiproliferative activities.

Microstructural and Texturizing Properties of Partially Pectin-Depleted Cell Wall Material: The Role of Botanical Origin and High-Pressure Homogenization.

In the current study, the texturizing properties of partially pectin-depleted cell wall material (CWM) of apple, carrot, onion and pumpkin, and the potential of functionalization by high-pressure homogenization (HPH) were addressed. This partially pectin-depleted CWM was obtained as the unextractable fraction after acid pectin extraction (AcUF) on the alcohol-insoluble residue. Chemical analysis was performed to gain insight into the polysaccharide composition of the AcUF. The microstructural and functional properties of the AcUF in suspension were studied before HPH and after HPH at 20 and 80 MPa. Before HPH, even after the pectin extraction, the particles showed a cell-like morphology and occurred separately in the apple, onion and pumpkin AcUF and in a clustered manner in the carrot AcUF. The extent of disruption by the HPH treatments at 20 and 80 MPa was dependent on the botanical origin. Only for the onion and pumpkin AcUF, the water binding capacity was increased by HPH. Before HPH, the texturizing potential of the AcUFs was greatly varying between the different matrices. Whereas HPH improved the texturizing potential of the pumpkin AcUF, no effect and even a decrease was observed for the onion AcUF and the apple and carrot AcUF, respectively.

Encapsulated probiotic cells: Relevant techniques, natural sources as encapsulating materials and food applications - A narrative review.

The administration of probiotic microorganisms in adequate amounts is constantly related to health benefits. To promote beneficial effects, these microorganisms must not be affected by exposure to environmental factors and must be able to adhere and colonize the human gastrointestinal tract. Several encapsulation techniques and encapsulating materials are available to produce probiotic particles, however, it is essential that the process must not be aggressive, reducing or preventing injuries and cell losses, besides, the particle properties obtained must be adequate for the proposed purpose. At the same time, the global market for supplements and probiotic foods has been growing significantly, and cell encapsulation appears as an alternative to incorporate probiotics into different food matrices. This review discusses and updates the main techniques, and the traditional and emerging polysaccharides for encapsulation of probiotic cells, as well as the advantages and possibilities of incorporating produced particles into food matrices. Currently, various scientific studies report the use of different encapsulation techniques, such as extrusion, emulsion, spray drying, spray chilling and fluidized bed to encapsulate probiotics properly. The alginate is still widely used to produce probiotic particles, however, there has been a growing interest in its total or partial substitution with others polysaccharides, such as gums, mucilages, prebiotic compounds and microbial exopolysaccharides, which improve the protection and survival of encapsulated cells and allow their incorporation into dairy and non-dairy food products.