ABSTRACT
A polyvinyl alcohol/gum tragacanth molecularly imprinted nanofiber fabricated by electrospinning (PVA/GT-MIN) was used as an efficient adsorbent for the solid phase extraction (SPE) of bisphenol A (BPA) in water samples. PVA and GT were functional polymers and BPA was the template for molecular imprinting. BPA was bound to the polymer matrix through hydrogen bonding. The SEM image of PVA/GT-MIN demonstrated a rough morphology with pores and a diameter of 501 nm. The data for the adsorption of BPA on PVA/GT-MIN fitted the Freundlich isotherm and pseudo-second-order kinetics models. The proposed SPE using PVA/GT-MIN coupled with high performance liquid chromatography-diode array detection presented good linearity from 50 µg/L-5 mg/L (R2 = 0.9999) and yielded a limit of detection of 21 µg/L. The PVA/GT-MIN was applied to extract bottled water for BPA analysis and recoveries were 93.1-97.7 % (RSDs ≤ 3.6 %). This study presents a novel, easily prepared PVA/GT-MIN adsorbent for the extraction of BPA in water.
ABSTRACT
The application of coatings is a strategy for maintaining the freshness of highly perishable fruits. This research aimed to evaluate the quality indices of strawberries (Amaou) coated with new coatings based on the sodium carboxymethyl cellulose (CMC) and cellulose nanofibres (CNF) with incorporated mandarin peel extract (ME) or 1-methylcyclopropene (1-MCP) during storage at 20days at 5 °C and 85% relative humidity (RH). Dissolving the coating solution containing ME in 1-MCP maintained its colour for up to 50 days. Coatings enhanced with ME and/or 1-MCP maintained fresh strawberries more effectively than the control, reducing weight loss and maintaining firmness, total soluble solids (TSS), citric acid, colour, and total phenolic content. The CCM2-2 coating solution showed superior effects on the weight loss and relative percentages of strawberry metabolites compared to the other coatings, as confirmed by the different components.
ABSTRACT
Bone tissue engineering scaffolds are an important means of repairing bone defects, but current solutions do not adequately simulate complex extracellular microenvironment fibrous structures and adjustable mechanical properties. We use template-assisted fiber freeze-shaping technology to construct silk fibroin nanofiber aerogels (SNFAs) with nanofibrous textures and adjustable mechanical properties. The parallel arranged channels, the pores, electrospun nanofibers, and silk protein conformation together constitute the hierarchical structure of SNFAs. Especially, the introduced electrospun nanofibers formed a biomimetic nanofibrous texture similar to the extracellular matrix, providing favorable conditions for cell migration and tissue regeneration. In addition, Young's modulus of SNFAs can be adjusted freely between 7 and 88 kPa. The rationally designed 3D architecture makes SNFAs perfectly mimic the fiber structure of the extracellular matrix and can adjust its mechanical properties to match the bone tissue perfectly. Finally, fiber-containing SNFAs observably promoted cell adhesion, proliferation, and differentiation, accelerating the bone repair process. The bone density in the defect area reached 0.53 g/cm3 and the bone volume/total volume (BV/TV) ratio reached 57 % at 12 weeks, respectively. It can be expected that this kind of tissue engineering scaffold with highly simulating extracellular matrix microenvironment and adjustable mechanical properties will possess broad prospects in the field of bone repair.
ABSTRACT
Quercetin, recognized for its antioxidant, anti-inflammatory, and antibacterial properties, faces limited biomedical application due to its low solubility. Cotton, a preferred wound dressing material over synthetic ones, lacks inherent antibacterial and wound-healing attributes and can benefit from quercetin features. This study explores the potential of overcoming these challenges through the inclusion complexation of quercetin with cyclodextrins (CDs) and the development of a nanofibrous coating on a cotton nonwoven textile. Hydroxypropyl-beta-cyclodextrin (HP-ß-CD) and hydroxypropyl-gamma-cyclodextrin (HP-γ-CD) formed inclusion complexes of quercetin, with chitosan added to enhance antibacterial properties. Phase solubility results showed that inclusion complexation can enhance quercetin solubility up to 20 times, with HP-γ-CD forming a more stable inclusion complexation compared with HP-ß-CD. Electrospinning of the nanofibers from HP-ß-CD/Quercetin and HP-γ-CD/Quercetin aqueous solutions without the use of a polymeric matrix yielded a uniform, smooth fiber morphology. The structural and thermal analyses of the HP-ß-CD/Quercetin and HP-γ-CD/Quercetin nanofibers confirmed the presence of inclusion complexes between quercetin and each of the CDs (HP-ß-CD and HP-γ-CD). Moreover, HP-ß-CD/Quercetin and HP-γ-CD/Quercetin nanofibers showed a near-complete loading efficiency of quercetin and followed a fast-releasing profile of quercetin. Both HP-ß-CD/Quercetin and HP-γ-CD/Quercetin nanofibers showed significantly higher antioxidant activity compared to pristine quercetin. The HP-ß-CD/Quercetin and HP-γ-CD/Quercetin nanofibers also showed antibacterial activity, and with the addition of chitosan in the HP-γ-CD/Quercetin system, the Chitosan/HP-γ-CD/Quercetin nanofibers completely eliminated the investigated bacteria species. The nanofibers were nontoxic and well-tolerated by cells, and exploiting the quercetin and chitosan anti-inflammatory activities resulted in the downregulation of IL-6 and NO secretion in both immune as well as regenerative cells. Overall, CD inclusion complexation markedly enhances quercetin solubility, resulting in a biofunctional antioxidant, antibacterial, and anti-inflammatory wound dressing through a nanofibrous coating on cotton textiles.
Subject(s)
Anti-Bacterial Agents , Anti-Inflammatory Agents , Antioxidants , Bandages , Chitosan , Cyclodextrins , Materials Testing , Nanofibers , Quercetin , Quercetin/pharmacology , Quercetin/chemistry , Antioxidants/pharmacology , Antioxidants/chemistry , Nanofibers/chemistry , Chitosan/chemistry , Chitosan/pharmacology , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Inflammatory Agents/pharmacology , Anti-Inflammatory Agents/chemistry , Cyclodextrins/chemistry , Cyclodextrins/pharmacology , Particle Size , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Microbial Sensitivity Tests , Cotton Fiber , Wound Healing/drug effects , Humans , Picrates/antagonists & inhibitors , Cell Survival/drug effects , Biphenyl CompoundsABSTRACT
Lightweight, flexible, efficient and easy-to-manufacture electromagnetic interference (EMI) shielding materials are in urgent demand in the communications industry, artificial intelligence and wearable electronics. Based on the large size difference between one-dimensional carboxymethyl cellulose nanofibers (CMC) and large-diameter silver nanowires (AgNWs), layered AgNWs/CMC nanocomposite films with large effective thickness, and high conductivity were first prepared by a simple one-step vacuum filtration self-assembly technique. The unique layered structure of the AgNWs/CMC nanocomposite film significantly enhances the conductive pathways within the film, endowing it excellent EMI shielding performance. The results show that the conductivity of the ultra-thin film with a thickness of 20 µm is 3.72 × 106 S/m, and the EMI SE in the X-band is 87.7 dB, which can effectively shield electromagnetic signals in mobile communications. Furthermore, the AgNWs/CMCs nanocomposite films exhibit excellent thermal management performance, which can be heated to 100-180 °C within 10 s at a low voltage of 1.5 V. In particular, this nanocomposite film with a new layered structure provides a noval preparation idea for future EMI shielding materials and wearable heating devices.
ABSTRACT
The avascular nature of cartilage tissue limits inherent regenerative capacity to counter any damage and this has become a substantial burden to the health of individuals. As a result, there is a high demand to repair and regenerate cartilage. Existing tissue engineering approaches for cartilage regeneration typically produce either microporous or nano-fibrous scaffolds lacking the desired biological outcome due to lack of biomimetic dual architecture of microporous construct with nano-fibrous interconnected structures like the native cartilage. Most of these scaffolds also fail to suppress ROS generation and provide sustained bioenergetics to cells, resulting in the loss of metabolic activity under avascular microenvironment of cartilage. A dual architecture microporous construct with nano-fibrous interconnected network of cellulose aerogel reinforced with arginine-coated graphene oxide (CNF-GO-Arg aerogel) was developed for cartilage regeneration. The designed dual-architectured CNF-GO-Arg aerogel using dual ice templating assembly demonstrates 80 % strain recovery ability under compression. The release of Arginine from CNF-GO-Arg aerogel supported 41 % reduction in intracellular ROS activity and promoted chondrogenic differentiation of hMSCs by shifting mitochondrial bioenergetics towards oxidative phosphorylation indicated by JC-1 dye staining. Overall developed CNF-GO-Arg aerogel provided multifunctionality via biomimetic morphology, cellular bioenergetics, and suppressed ROS generation to address the need for regeneration of cartilage.
ABSTRACT
Stem cell culture often requires various animal-derived components such as serum and collagen. This limits its practical use. Therefore, xeno-free (xenogeneic component-free) culture systems are receiving increased attention. Herein, we propose xeno-free, plant-derived cellulose nanofibers (CNFs) with different surface chemistry: 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized CNFs (TOCNFs) with carboxy groups and surface-sulfated CNFs (S-CNFs) for the proliferation of human mesenchymal stem cells (hMSCs) under various serum conditions. We cultured bone marrow-derived hMSCs on CNF scaffolds with various fiber lengths and functional group contents. Original CNFs were bioinert materials that did not contribute to cell adhesion. In contrast, the surface-modified CNFs facilitated the proliferation of immortalized hMSCs under normal and low-serum conditions. The TOCNFs (COONa: 1.47 mmol g-1; length: 0.53 µm), the S-CNFs (OSO3Na: 0.64 mmol g-1; 0.61 µm), and a combination of the two (1:1 by weight) enabled immortalized hMSCs to maintain their multipotency, even under serum-free conditions. Primary cultured hMSCs proliferated well on the TOCNF/S-CNF scaffolds in a completely serum-free medium, comparable to animal-derived type I collagen, although few hMSCs adhered to the standard polystyrene substrate. Our strategy of using surface-modified CNFs will inform the development of xeno-free culture systems to avoid the use of animal-derived materials for both cell culture media and scaffolds.
Subject(s)
Cell Proliferation , Cellulose , Mesenchymal Stem Cells , Nanofibers , Tissue Scaffolds , Humans , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Nanofibers/chemistry , Cellulose/chemistry , Tissue Scaffolds/chemistry , Cell Proliferation/drug effects , Cells, Cultured , Surface Properties , Cell Adhesion/drug effects , Cyclic N-Oxides/chemistry , Cell Culture Techniques/methods , Cell Differentiation/drug effectsABSTRACT
Oral leukoplakia (OLK) is the most common oral precancerous lesion, and 3%-17% of OLK patients progress to oral squamous cell carcinoma. OLK is susceptible to recurrence and has no effective treatment. However, conventional drugs have significant side effects and limitations. Therefore, it is important to identify drugs that target OLK. In this study, scavenger receptor A (SR-A) was found to be abnormally highly expressed in the oral mucosal epithelial cells of OLK patients, whereas molecular biology studies revealed that low molecular weight fucoidan (LMWF) promoted apoptosis of dysplastic oral keratinocytes (DOK) and inhibited the growth and migration of DOK, and the inhibitory effect of LMWF on OLK was achieved by regulating the SR-A/Wnt signaling axis and related genes. Based on the above results and the special situation of the oral environment, we constructed LMWF/poly(caprolactone-co-lactide) nanofiber membranes with different structures for the in-situ treatment of OLK using electrospinning technology. The results showed that the nanofiber membranes with a shell-core structure had the best physicochemical properties, biocompatibility, and therapeutic effect, which optimized the LMWF drug delivery and ensured the effective concentration of the drug at the target point, thus achieving precise treatment of local lesions in the oral cavity. This has potential application value in inhibiting the development of OLK.
ABSTRACT
The development of biocompatible wound dressings containing therapeutic agents to accelerate wound healing is an interesting field of study in biomedical sciences. Polyvinyl alcohol (PVA) nanofibers were loaded with zinc oxide nanoparticles (ZnO NPs) and curcumin (Cur) through electrospinning. The dressings were characterized by SEM and XRD and FTIR. The antioxidant, antibacterial, and cytotoxic activities Cur/ZnO/PVA nano dressing were evaluated using DPPH radical scavenging assay, disc diffusion method, and MTT assay, respectively. Cur/ZnO/PVA nano dressing showed sustained Cur release about 19.7% and 61.1% after 8h and 168h, respectively. Cur/ZnO NPs/PVA mixture had higher antioxidant potential than PVA, ZnO NPs, and Cur. The dressing showed a good antibacterial effect. The in vivo wound healing effect of different types of prepared dressings, including PVA, Cur/PVA, Cur/ZnO/PVA, and ZnO/ PVA nanofibers, was also investigated. PVA dressing containing Cur/ZnO NPs resulted in the highest increase of wound contraction in rats. The assembly of Cur and ZnO NPs on PVA nanofibers could propose as an effective delivery method to improve the wound healing process. The investigated wound dressing could be commercialized and used on a large scale after proper further studies, including clinical trials.
ABSTRACT
Liquid crystal elastomers (LCEs), consisting of polymer networks and liquid crystal mesogens, show a reversible phase change under thermal stimuli. However, the kinetic performance is limited by the inherently low thermal conductivity of the polymers. Transforming amorphous bulk into a fiber enhances thermal conductivity through the alignment of polymer chains. Challenges are present due to their rigid networks, while cross-links are crucial for deformation. Here, we employ hydrodynamic alignment to orient the LCE domains assisted by controlled in situ cross-linking and to remarkably reduce the diameter to submicrons. We report that the intrinsic thermal conductivity of LCE fibers at room temperature reaches 1.44 ± 0.32 W/m-K with the sub-100 nm diameter close to the upper limit determined in the quasi-1D regime. Combining the outstanding thermal conductivity and thin diameters, we anticipate these fibers to exhibit a rapid response and high force output in thermomechanical systems. The fabrication method is expected to apply to other cross-linked polymers.
ABSTRACT
OBJECTIVE: In the current research, 6-gingerol (GA)-loaded nanofiber drug delivery system were developed, and their potential usage in wound healing was evaluated. SIGNIFICANCE: This study investigates the effectiveness of nanofibrous membranes composed of sodium alginate (SA), poly(vinyl alcohol) (PVA), and 6-gingerol (GA) as delivery systems for anti-inflammatory agents in the context of wound dressings. METHODS: GA-loaded SA/PVA nanofiber was prepared using electrospinning. In vitro characterization of this nanofiber included the examination of comprehensive in vitro characterization, anti-inflammatory and antioxidant activities, cytotoxicity, a scratch tes and in vivo skin test. RESULTS: GA was extracted from Zingiber officinale, and its successful isolation was confirmed through analyses such as H-NMR, C-NMR. Then GA was electrospuned into the SA/PVA nanofibers, and scanning electron microscopy (SEM) imaging revealed that the fiber diameters of the formulations ranged between 148 nm and 176 nm. Anti-inflammatory and antioxidant studies demonstrated that the effectiveness of GA increased with higher doses; however, this increase was accompanied by decreased cell viability. In vitro release studies revealed that GA exhibited a burst release within the first 8 h, followed by a controlled release, reaching completion within 24 h. Within the scope of in vitro release kinetics, release data are mathematically compatible with the Weibull model with high correlation. The scratch test results indicated that TB2 (%1 GA) promoted epithelialization. Furthermore, it was determined that TB2 (%1 GA) did not cause any irritation. CONCLUSIONS: As a result, TB2 shows promise as a formulation for wound dressings, offering potential benefits in the field of wound care.
ABSTRACT
Anisotropic cellulose nanofiber (CNF) foams represent the state-of-the-art in renewable insulation. These foams consist of large (diameter >10 µm) uniaxially aligned macropores with mesoporous pore-walls and aligned CNF. The foams show anisotropic thermal conduction, where heat transports more efficiently in the axial direction (along the aligned CNF and macropores) than in the radial direction (perpendicular to the aligned CNF and macropores). Here we explore the impact on axial and radial thermal conductivity upon depositing a thin film of reduced graphene oxide (rGO) on the macropore walls in anisotropic CNF foams. To obtain rGO films on the foam walls we developed liquid-phase self-assembly to deposit rGO in a layer-by-layer fashion. Using electron and ion microscopy, we thoroughly characterized the resulting rGO-CNF foams and confirmed the successful deposition of rGO. These hierarchical rGO-CNF foams show lower radial thermal conductivity (λr) across a wide range of relative humidity compared to CNF control foams. Our work therefore demonstrates a potential method for improved thermal insulation in anisotropic CNF foams and introduces versatile self-assembly for postmodification of such foams.
ABSTRACT
Currently, the number of patients with cancer is expanding consistently because of a low quality of life. For this reason, the therapies used to treat cancer have received a lot of consideration from specialists. Numerous anticancer medications have been utilized to treat patients with cancer. However, the immediate utilization of anticancer medicines leads to unpleasant side effects for patients and there are many restrictions to applying these treatments. A number of polymers like cellulose, chitosan, Polyvinyl Alcohol (PVA), Polyacrylonitrile (PAN), peptides and Poly (hydroxy alkanoate) have good properties for the treatment of cancer, but the nanofibers-based target and controlled drug delivery system produced by the co-axial electrospinning technique have extraordinary properties like favorable mechanical characteristics, an excellent release profile, a high surface area, and a high sponginess and are harmless, bio-renewable, biofriendly, highly degradable, and can be produced very conveniently on an industrial scale. Thus, nanofibers produced through coaxial electrospinning can be designed to target specific cancer cells or tissues. By modifying the composition and properties of the nanofibers, researchers can control the release kinetics of the therapeutic agent and enhance its accumulation at the tumor site while minimizing systemic toxicity. The core-shell structure of coaxial electrospun nanofibers allows for a controlled and sustained release of therapeutic agents over time. This controlled release profile can improve the efficacy of cancer treatment by maintaining therapeutic drug concentrations within the tumor microenvironment for an extended period.
ABSTRACT
BACKGROUND: Wound healing pivots on a finely orchestrated inflammatory cascade, critical for tissue repair. Chronic wounds, compounded by persistent inflammation and susceptibility to infection, pose formidable clinical challenges. Nanofiber dressings offer promising avenues for wound care, yet their interaction with inflammation and infection remains elusive. We aim to delineate the inflammatory cascade preceding wound closure and assess Cu@Bbc nanofibers' therapeutic efficacy in mitigating inflammation and combating infection. Their unique attributes suggest promise in modulating inflammation, fostering tissue regeneration, and preventing microbial colonization. Investigating the intricate interplay between nanofiber scaffolds, inflammation, and infection may unveil mechanisms of enhanced wound healing. Our findings could stimulate the development of tailored dressings, urgently needed for effective wound management amidst immune dysregulation, infection, and inflammation. METHODS: In this investigation, we synthesized Cu@Bbc nanofibers, incorporating curcumin and berberine chloride, for wound healing applications. We evaluated their individual and combined antibacterial, anti-biofilm, and antioxidant activities, alongside binding affinity with pro-inflammatory cytokines through molecular docking. Morphological characterization was conducted via SEM, FTIR assessed functional groups, and wettability contact angle measured hydrophobic properties. The physical properties, including tensile strength, swelling behavior, and thermal stability, were evaluated using tensile testing, saline immersion method and thermogravimetric analysis. Biodegradability of the nanofibers was assessed through a soil burial test. Biocompatibility was determined via MTT assay, while wound healing efficacy was assessed with in vitro scratch assays. Controlled drug release and antibacterial activity against MRSA were examined, with in vivo assessment in a zebrafish model elucidating inflammatory responses and tissue remodeling. RESULTS: In this study, the synergistic action of curcumin and berberine chloride exhibited potent antibacterial efficacy against MRSA, with significant anti-mature biofilm disruption. Additionally, the combination demonstrated heightened antioxidant potential. Molecular docking studies revealed strong binding affinity with pro-inflammatory cytokines, suggesting a role in expediting the inflammatory response crucial for wound healing. Morphological analysis confirmed nanofiber quality, with drug presence verified via FTIR spectroscopy. Cu@Bbc demonstrated higher tensile strength, optimal swelling behavior, and robust thermal stability as evaluated through tensile testing and thermogravimetric analysis. Additionally, the Cu@Bbc nanofiber showed enhanced biodegradability, as confirmed by the soil burial test. Biocompatibility assessments showed favorable compatibility, while in vitro studies demonstrated potent antibacterial activity. In vivo zebrafish experiments revealed accelerated wound closure, re-epithelialization, and heightened immune response, indicative of enhanced wound healing. CONCLUSION: In summary, our investigation highlights the efficacy of Cu@Bbc nanofibers, laden with curcumin and berberine chloride, in displaying robust antibacterial and antioxidant attributes while also modulating immune responses and inflammatory cascades essential for wound healing. These results signify their potential as multifaceted wound dressings for clinical implementation.
ABSTRACT
Ultrafine noble metals have emerged as advanced nanocatalysts in modern society but still suffer from unavoidable sintering at temperatures above 250 °C (e.g., Pt). In this work, closely packed CeO2 grains were confined elegantly in fibrous nanostructures and served as a porous support for stabilizing sub-3 nm Pt clusters. Through precisely manipulating the asymmetry of obtained nanofibers, uneven strain was induced within C-shaped CeO2 nanofibers with tensile strain at the outer side and compressive strain at the inner side. As a result, the enriched oxygen vacancies significantly improved adhesion of Pt to CeO2, thereby boosting the sinter-resistance of ultraclose sub-3 nm Pt clusters. Notably, no aggregation was observed even after exposure to humid air at 750 °C for 12 h, which is far beyond their Tammann temperature (sintering onset temperature, below 250 °C). In situ HAADF-STEM observation revealed a unique sintering mechanism, wherein Pt clusters initially migrate toward the grain boundaries with concentrated stain and undergo slight coalescence, followed by subsequent Ostwald ripening at higher temperatures. Moreover, the sinter-resistant Pt/C-shaped CeO2 effectively catalyzed soot combustion (over 700 °C) in a durable manner. This work provides a new insight for developing sinter-resistant catalysts from the perspective of strain engineering within nano-oxides.
ABSTRACT
Herein, a highly efficient colorimetric chemosensor incorporating ion-imprinted electrospun nanofiber was developed for the removal and detection of Cu2+ ions. In this regard, PVA/chitosan composites were used as the polymeric matrix, and 1-(2-pyridylazo)-2-naphthol was employed for complex formation. The prepared naked-eye sensor was characterized using Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, atomic force microscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction analysis, revealing the morphological, structural, and molecular properties of the sensor. The results showed that the colorimetric chemosensor based on copper-imprinted nanofiber (Cu-INF) possesses higher selectivity for Cu2+ compared to interference ions. The selectivity coefficient (k) and relative selectivity coefficient (K') indicated the selective behavior of Cu-INF in the adsorption of Cu2+ in binary systems including Cu2+/Co2+, Cu2+/Ni2+, and Cu2+/Zn2+. Furthermore, the ion-imprinted nanofiber was used for the preconcentration of copper ions, demonstrating a high adsorption capacity of 128.205 mg g-1 for Cu2+. The equilibrium adsorption isotherm and adsorption kinetics of Cu2+ on Cu-INF followed the Freundlich adsorption isotherm and a pseudo-second-order model, respectively. The developed sensor exhibited a linear detection range of 5 × 10-8 - 2 × 10-7 M with a limit of detection (LOD) of 1.07 × 10-8 M for copper ions. The results indicated satisfactory adsorption and successful detection of Cu2+ at trace concentrations.
ABSTRACT
Chitin, an N-acetyl-D-glucosamine polymer, has multiple functions in living organisms, including the induction of disease resistance and growth promotion in plants. In addition, chitin oligosaccharides (COs) are used as the backbone of the signaling molecule Nod factor secreted by soil bacteria rhizobia to establish a mutual symbiosis with leguminous plants. Nod factor perception triggers host plant responses for rhizobial symbiosis. In this study, the effects of chitins on rhizobial symbiosis were examined in the leguminous plants Lotus japonicus and soybean. Chitin nanofiber (CNF), retained with polymeric structures, and COs elicited calcium spiking in L. japonicus roots expressing a nuclear-localized cameleon reporter. Shoot growth and symbiotic nitrogen fixation were significantly increased by CNF but not COs in L. japonicus and soybean. However, treatments with chitin and cellulose nanofiber, structurally similar polymers to CNF, did not affect shoot growth and nitrogen fixation in L. japonicus. Transcriptome analysis also supported the specific effects of CNF on rhizobial symbiosis in L. japonicus. Although chitins comprise the same monosaccharides and nanofibers share similar physical properties, only CNF can promote rhizobial nitrogen fixation in leguminous plants. Taking the advantages on physical properties, CNF could be a promising material for improving legume yield by enhancing rhizobial symbiosis.
ABSTRACT
This study presents an innovative bi-layered three-dimensional skin-like nanopad (SLN) engineered for skin tissue regeneration. The SLN integrates a mechanically supportive polycaprolactone nanofibrous layer with a functional chitosan hydrogel film, mimicking natural skin. Our SLN exhibits superior flexibility, with a maximum elongation of 751.71 ± 125 % and exceptional porosity of 95 ± 4.5 %, ensuring effective exudate management due to its high water uptake capacity (4393 ± 72 %). FTIR analysis confirmed a distinctive fiber-hydrogel network within the SLN, which serves as a barrier against Staphylococcus aureus and Pseudomonas aeruginosa infiltration. In vitro cell viability assays with the human fibroblast have consistently demonstrated that 3D bi-layered SLN enhances fibroblast attachment, infiltration, and proliferation by 150 ± 20 %. In vivo studies in a rat model demonstrated significantly faster wound closure, with 60 % on day 7 and 87 % on day 10, compared to the 30 % and 60 % in controls, highlighting the efficacy of SLN. By mimicking the architecture of native skin, this biomimetic bi-layered SLN scaffold provides flexibility and support while accelerating in vivo wound closure by promoting fibroblast proliferation and infiltration. Customizable in size, depth, and shape, the engineered SLN has emerged as a promising platform for advanced wound care and tissue engineering.
ABSTRACT
An imbalance between energy intake and energy expenditure predisposes obesity and its related metabolic diseases. Soluble dietary fiber has been shown to improve metabolic homeostasis mainly via microbiota reshaping. However, the application and metabolic effects of insoluble fiber are less understood. Herein, we employed nanotechnology to design citric acid-crosslinked carboxymethyl cellulose nanofibers (CL-CNF) with a robust capacity of expansion upon swelling. Supplementation with CL-CNF reduced food intake and delayed digestion rate in mice by occupying stomach. Besides, CL-CNF treatment mitigated diet-induced obesity and insulin resistance in mice with enhanced energy expenditure, as well as ameliorated inflammation in adipose tissue, intestine and liver and reduced hepatic steatosis, without any discernible signs of toxicity. Additionally, CL-CNF supplementation resulted in enrichment of probiotics such as Bifidobacterium and decreased in the relative abundances of deleterious microbiota expressing bile salt hydrolase, which led to increased levels of conjugated bile acids and inhibited intestinal FXR signaling to stimulate the release of GLP-1. Taken together, our findings demonstrate that CL-CNF administration protects mice from diet-induced obesity and metabolic dysfunction by reducing food intake, enhancing energy expenditure and remodeling gut microbiota, making it a potential therapeutic strategy against metabolic diseases.
ABSTRACT
In this work, a core substituted NMI-conjugated dipeptide (4MNLV) was extensively studied in mixed solvent systems to explore the polarity effect on the self-assembly pattern and their photophysical property. 4MNLV adopted a J- or H- type aggregation pattern depending upon the polarity index of the solvent system chosen. The self-assembly process was achieved through the anti-solvent effect. UV-vis study suggested that if the stock solution of 4MNLV was diluted with a relatively more polar solvent (compared to the stock solvent), then the system acquired J- type of aggregation pattern by showing a red-shift in their absorption maxima (λmax). Conversely, when the stock was diluted by a relatively less polar solvent, H-type of aggregation was observed where blue shift of λmax was noticed. The emission spectra and the lifetime of the self-assembled materials were also influenced by the chosen solvent system. The chirotopic behaviour of these self-assembled materials was studied through CD spectroscopy. Morphological study indicated the formation of helical nanofibrillar structures. The bright green fluorescence of these highly biocompatible naphthalimide-peptide conjugate was used for cell imaging application, indicating its futuristic scope.