ABSTRACT
OBJECTIVES: 3D printing found its way into various medical applications and could be particularly beneficial for dentistry. Currently, materials for 3D printing of occlusal splints lack mechanical strength compared to polymethyl methacrylate (PMMA) used for standard milling of occlusal splints. It is known that print orientation and graphene nanoplatelets (GNP) can increase biaxial strength in a variety of materials. Thus, the aim of this study was to assess if adjustment of print orientation and addition of GNP improve biaxial strength and if they affect cytotoxicity of a 3D printable resin for occlusal splints. METHODS: Specimens were printed vertically and horizontally with a stereolithography (SLA) printer and multilayered GNP powder was added to the resin at different concentrations. Printed specimens were characterized by Raman spectroscopy, optical profilometer analysis and scanning electron microscopy. Biaxial strength was evaluated by biaxial flexural testing. Cytotoxicity of specimens on L929 and gingival stromal cells (GSC) was assessed by the toxdent test, the resazurin-based toxicity assay and live-dead staining. RESULTS: Horizontally printed specimens showed significantly higher biaxial strength and lower deformation. GNP did not improve biaxial strength and material deformation of 3D-printed resins. None of the specimens were cytotoxic to L929 cells or GSC. SIGNIFICANCE: Print orientation in SLA printing has a significant impact on biaxial strength and material deformation. 3D printable materials can reach comparable or even improved biaxial strength compared to PMMA when using the optimal print orientation while GNP has no beneficial effects on the biaxial strength of resins for 3D printing of occlusal splints.
ABSTRACT
BACKGROUND: Few studies have been conducted on treating temporomandibular disorders (TMDs) with new digital occlusal splints, which has increasingly attracted wide attention. METHODS: To evaluate the clinical efficacy and quality of life (QoL) of Kovacs digital occlusal splint (KDOS) treatment in patients with TMD. MATERIALS AND METHODS: Eighty-nine patients with TMD who were treated using KDOS were analyzed. The patients were divided into three groups according to the Wilkes stage. The clinical symptoms and QoL scores of the patients in each group were recorded before and at least three months after treatment, and the data were statistically analyzed and compared. The relationships between the disease severity, sex, age, and level of QoL before treatment and improvement in the clinical symptoms were analyzed using binary logistic regression. RESULTS: The mean age and follow-up period of the patients were 28.0 ± 10.4 years and 4.9 ± 2.1 months, respectively. After KDOS treatment, the improvement rates of joint noise and pain were 80.4% and 69.8%, respectively. Additionally, the patients' maximum mouth opening and global QoL mean scores significantly improved compared to those before treatment (p < 0.001). Binary logistic regression analysis revealed that the factors affecting the improvement in the clinical symptoms were disease severity and level of QoL before treatment. CONCLUSIONS: KDOS can improve the clinical symptoms and QoL of patients with TMD. Moreover, patients without osteoarthritis and with low pretreatment QoL levels are more likely to demonstrate clinical improvement. TRIAL REGISTRATION: The trial was registered with Chinese Clinical Trial Registry (ChiCTR) (ID: ChiCTR2300076518) on 11/10/2023.
Subject(s)
Occlusal Splints , Quality of Life , Temporomandibular Joint Disorders , Humans , Temporomandibular Joint Disorders/therapy , Temporomandibular Joint Disorders/psychology , Female , Male , Adult , Pilot Projects , Treatment Outcome , Middle Aged , Young Adult , AdolescentABSTRACT
OBJECTIVE: To assess the oral health status and microbiota of subgingival plaque in patients with surgically repaired cleft lip and palate (CLP) during orthodontic treatment for maxillary protraction with two different orthodontic appliances. DESIGN: Randomized controlled trial. SETTING: Institutional. PARTICIPANTS: A total of 90 patients with surgically repaired Unilateral Cleft Lip and Palate, out of initially enrolled 120 patients, were divided into 3 groups: experimental group I, experimental group II and control group, with 30 subjects each. Patients with a history of oral prophylaxis in last 6 months or antibiotic therapy within 3 months were excluded from the study. INTERVENTIONS: Bone Anchored Maxillary Protraction was done in experimental group I, while facemask with acrylic occlusal splint was used for maxillary protraction in experimental group II and no orthodontic intervention in control group. MEAN OUTCOME MEASURES: Plaque Index (PI), Gingival Index (GI), Gingival Bleeding Index (GBI), Probing Depth (PD), and microbiota of subgingival plaque (P. gingivalis, P. intermedia, Veillonella and Capnocytophaga) were compared at baseline (T0) and after 8 months (T1). RESULTS: The PI, GI, GBI and PD were observed to be significantly higher in experimental group II followed by experimental group I as compared to control group at 8 months interval (P < .001). The microbiota counts increased significantly in experimental group II and experimental group I (P < .001), as compared to control group. CONCLUSION: Maxillary protraction with facemask and bone plates was found to be a better alternative than facemask with occlusal splint, considering the overall oral health of patients with CLP.
ABSTRACT
The aim of this study is to investigate the influence of printing material, build angle, and artificial aging on the accuracy of SLA- and DLP-printed occlusal devices in comparison to each other and to subtractively manufactured devices. A total of 192 occlusal devices were manufactured by one SLA-printing and two DLP-printing methods in 5 different build angles as well as milling. The specimens were scanned and superimposed to their initial CAD data and each other to obtain trueness and precision data values. A second series of scans were performed after the specimens underwent an artificial aging simulation by thermocycling. Again, trueness and precision were investigated, and pre- and post-aging values were compared. A statistically significant influence was found for all main effects: manufacturing method, build angle, and thermocycling, confirmed by two-way ANOVA. Regarding trueness, overall tendency indicated that subtractively manufactured splints were more accurate than the 3D-printed, with mean deviation values around ±0.15 mm, followed by the DLP1 group, with ±0.25 mm at 0 degree build angle. Within the additive manufacturing methods, DLP splints had significantly higher trueness for all build angles compared to SLA, which had the highest mean deviation values, with ±0.32 mm being the truest to the original CAD file. Regarding precision, subtractive manufacturing showed better accuracy than additive manufacturing. The artificial aging demonstrated a significant influence on the dimensional accuracy of only SLA-printed splints.
ABSTRACT
OBJECTIVES: The aim of this review was to analyze mechanical and biological properties of resin materials used with subtractive or additive techniques for oral appliances fabrication and compare them to those conventionally manufactured. MATERIALS AND METHODS: The protocol was registered online at Open Science Framework (OSF) registries ( https://osf.io/h5es3 ) and the study was based on the preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P). An electronic search was conducted on MEDLINE (via PubMed), Scopus, and Web of Science from 1 February 2022 to 1 May 2022. INCLUSION CRITERIA: in vitro and in vivo studies published in the last 10 years, with CAD-CAM or 3D printed resins for occlusal splints. Data considered homogenous were subjected to meta-analysis (95% confidence interval [CI]; α = 0.05) with Stata17 statistical software. Since all variables were continuous, the Hedge g measure was calculated. A fixed-effects model was used for I2 = 0%, while statistical analysis was conducted using a random-effects model with I2 > 0%. RESULTS: 13 studies were included after full-text reading. The mechanical properties most studied were wear, flexural strength, surface hardness and surface roughness, while only 1 study investigated biological properties, performing the XTT viability assay. For the meta-analysis, only surface roughness, volume loss, and flexural strength were selected. Considering surface roughness, the subtractive specimen had a lower average value compared to traditional ones (Hedge's g with 95% CI = -1.25[ -1.84, - 0.66]). No significant difference was detected in terms of volume loss (P > 0.05) between the groups (Hedge's g with 95% CI = -0.01 [-2.71, - 2.68]). While flexural strength was higher in the control group (Hedge's g with 95% CI = 2.32 [0.10-4.53]). CONCLUSION: 3D printed materials showed properties comparable to conventional resins, while milled splint materials have not shown better mechanical performance compared with conventional heat-cured acrylic resin. Polyetheretherketone (PEEK) have great potential and needs to be further investigated. Biological tests on oral cell populations are needed to confirm the long-term biocompatibility of these materials. CLINICAL RELEVANCE: The use of "mixed splints" combining different materials needs to be improved and evaluated in future research to take full advantage of different characteristics and properties.
Subject(s)
Computer-Aided Design , Printing, Three-Dimensional , Humans , Materials Testing , Polymers/chemistry , Dental Materials/chemistry , Surface PropertiesABSTRACT
OBJECTIVE: To evaluate the effect of polishing and layering thickness on the wear resistance of 3D-printed occlusal splint materials. METHODS: Specimens with 3 different layer thicknesses (50, 75, 100 µm) were produced in the form of a disc 3 mm thick using V-Print splint resin on a 3D-printer with digital light processing technology. (n = 16 for each thickness) All specimens were washed and cured according to the manufacturer's instructions. Half of the specimens of each layer thickness were polished with silicon carbide papers. All specimens were subjected to 120.000 cycles of a chewing simulator for 2-body wear tests. Before and after the wear test, the specimens were scanned with a laser scanner, and the images were overlaid using a 3D analysis program and the volume loss was calculated. The wear patterns of the specimens were examined under a scanning electron microscope. Statistical evaluation was performed using a Shapiro-Wilk test, 2-way ANOVA, 1-way ANOVA, and Tukey post hoc test (α = 0.05). RESULTS: While polishing had a significant effect (p = 0.003) on the wear volume of the occlusal splints, layer thickness (p = 0.105) and their interaction between polishing and layer thickness (p = 0.620) did not significantly affect the wear volume. Regardless of the polishing, the lowest mean wear was observed for D50 (0.064 mm3), followed by D75 (0.078 mm3), and D100 (0.096 mm3). However, a significant difference was observed only between polished D50 and unpolished D100. CONCLUSION: The polished 3D-printed occlusal splint resin showed higher wear resistance than the unpolished one, regardless of the layer thickness. CLINICAL SIGNIFICANCE: Since different layer thicknesses of 50 µm and greater had no effect on the wear resistance of the material, a layer thickness of 100 µm may be preferred for faster printing. However, polishing occlusal splints may reduce the amount of wear and improve clinical performance.
Subject(s)
Dental Polishing , Materials Testing , Microscopy, Electron, Scanning , Occlusal Splints , Printing, Three-Dimensional , Surface Properties , Dental Polishing/methods , Humans , Carbon Compounds, Inorganic/chemistry , Silicon Compounds/chemistry , Dental Restoration Wear , Lasers , Dental Materials/chemistry , Computer-Aided Design , Mastication/physiologyABSTRACT
BACKGROUND: Single nucleotide polymorphisms (SNPs) may influence pain susceptibility and impact treatment response in pain-related temporomandibular disorders (TMDp). OBJECTIVE: Explore the role of COMT (rs4646310, rs6269, rs4818, rs4680) and OPRM1 (rs1799971) genotypes in regulating treatment response. METHODS: Sixty TMDp patients (55 females and 5 males), diagnosed with the Diagnostic Criteria for TMD (DC/TMD), underwent standardised treatment (information and education, home physical therapy, occlusal splint) for 6 months. Treatment outcomes included: pain intensity, pain-free mouth opening, jaw functional limitation, depression, and anxiety. Genotyping for COMT and OPRM1 SNPs was performed using DNA from buccal mucosa swabs and TaqMan assays. Statistical analysis was carried out to compare the changes in treatment outcomes and the influence of genotypes on treatment response. RESULTS: Significantly less pain reduction was observed in minor allele carriers of rs4646310, and rs4680 compared to dominant homozygous (p < .025). Minor allele carriers of rs1799971 and rs4646310 demonstrated worsening in pain-free mouth opening while dominant homozygous exhibited improvement (p < .025). Significantly less anxiety reduction was observed in minor allele carriers of rs4646310 compared to dominant homozygous (p = .003). Of the all variables assessed in the regression model, carrying a minor allele of rs1799971 predicted a poorer treatment response considering pain-free mouth opening while carrying a minor allele of rs4646310 predicted less pain and less anxiety reduction. CONCLUSION: Our findings indicate that certain SNP variants of the COMT and OPRM1 genes were associated with poorer treatment response and may therefore play a significant role in the classification of TMDp patients. Also, assessment of patient genotype could potentially aid in predicting treatment response.
Subject(s)
Catechol O-Methyltransferase , Facial Pain , Genotype , Pain Measurement , Polymorphism, Single Nucleotide , Receptors, Opioid, mu , Temporomandibular Joint Disorders , Humans , Female , Male , Temporomandibular Joint Disorders/genetics , Temporomandibular Joint Disorders/therapy , Temporomandibular Joint Disorders/physiopathology , Adult , Treatment Outcome , Catechol O-Methyltransferase/genetics , Facial Pain/genetics , Facial Pain/therapy , Facial Pain/physiopathology , Receptors, Opioid, mu/genetics , Middle Aged , Occlusal Splints , Young Adult , Genetic Predisposition to Disease , AllelesABSTRACT
BACKGROUND: Myogenic temporomandibular disorders (M-TMD) commonly involve occlusal splint (OS) therapy and musculoskeletal physiotherapy (MPT). OBJECTIVES: To compare the effects of combining OS with MPT and education (EG) against OS and education (CG), in chronic M-TMD patients. METHODS: In this double-blind randomised controlled trial, 62 participants were assigned to either EG or CG. The primary outcomes, pain levels at rest (VAS rest), maximum oral opening (VAS open) and during chewing (VAS chew), were measured by Visual Analogue Scale (VAS) in cm. The secondary outcome was the range of motion (ROM) for maximum oral opening. Both interventions lasted 3 months, with outcomes assessed at baseline (T0), post-treatment (T1) and 3 months post-treatment (T2). RESULTS: Intention-to-treat analysis revealed significant improvements favouring EG (VAS rest = -1.50 cm [CI95%: -2.67, -0.32], p = .04; VAS open = -2.00 cm [CI95%: -3.23, -0.75], p < .01; VAS chew = -1.71 cm [CI95%: -2.90, -0.52], p = .01; ROM = 4.61 [CI95%: 0.93, 8.30], p = .04). Additionally, VAS measures were influenced by follow-up times (VAS rest = -0.73 cm [CI95%: -1.30, -0.17], p = 0.03; VAS open = -0.97 cm [CI95%: -1.57, -0.37], p < .01; VAS chew = -1.15 cm [CI95%: -1.73, -0.58], p < .01). At T1, EG demonstrated higher number of responders compared to CG for VAS open (χ2(1) = 4.39, p = .04) and VAS chew (χ2(1) = 11.58, p < .01). CONCLUSION: Adding MPT to education and OS yields better outcomes in terms of pain reduction and ROM improvement, in chronic M-TMD. TRIAL REGISTRATION NUMBER: NCT03726060.
Subject(s)
Occlusal Splints , Pain Measurement , Physical Therapy Modalities , Range of Motion, Articular , Temporomandibular Joint Disorders , Humans , Female , Male , Temporomandibular Joint Disorders/therapy , Temporomandibular Joint Disorders/physiopathology , Temporomandibular Joint Disorders/rehabilitation , Double-Blind Method , Adult , Range of Motion, Articular/physiology , Treatment Outcome , Middle Aged , Combined Modality Therapy , Facial Pain/therapy , Facial Pain/physiopathology , Young AdultABSTRACT
Background Temporomandibular joint disorders (TMD) represent a prevalent group of conditions impacting the temporomandibular joint. Among the therapeutic interventions, occlusal splint therapy has gained recognition for its potential to address TMD symptoms, particularly in cases involving joint displacement. Objective This study aims to investigate the effectiveness of occlusal splint therapy in cases of moderate TMD with joint displacement, focusing on changes in condylar position, joint morphology, and patient-reported outcomes. Methods A retrospective analysis was conducted involving 148 participants who underwent occlusal splint therapy between January 2018 and December 2020. Data were collected through cone beam computed tomography (CBCT) imaging for precise assessments of condylar position and joint morphology. Ethical approval was obtained, and participants provided informed consent. Baseline characteristics, medical history, and TMD severity were recorded. Occlusal splint therapy included individualized fabrication, occlusal analysis, adjustments for optimal fit, and prescribed wear schedules. Follow-up included CBCT scans at specified intervals (three months and six months), with participant-reported outcomes collected. The data analysis was conducted using IBM SPSS Statistics for Windows, Version 22.0 (Released 2013; IBM Corp., Armonk, NY, USA). Paired t-tests or nonparametric equivalents were employed to assess changes in condylar position and joint morphology. Subgroup analyses were conducted to explore potential factors influencing treatment outcomes. The significance level was set at p < 0.05 for all statistical tests. Results The entire cohort (n = 148) had a mean age of 32.5 years (± 8.1), with a balanced gender distribution. Changes in condylar position revealed a statistically significant improvement (p = 0.03), with a mean decrease of 0.2 mm posttreatment. Joint morphology changes indicated increased joint space width (p = 0.01), improved disc position (p = 0.02), and nonsignificant alterations in bony structures (p = 0.10). Patient-reported outcomes demonstrated significant improvements in pain levels, jaw functionality, and satisfaction (all p < 0.001). Age and gender subgroup analyses showed consistent improvements in condylar position, joint morphology, and patient-reported outcomes across different groups. Conclusion Occlusal splint therapy demonstrated effectiveness in improving condylar position, joint morphology, and patient-reported outcomes in cases of moderate TMD with joint displacement. The findings underscore the potential of occlusal splint therapy as a viable intervention for managing TMD, providing valuable insights for clinicians and researchers.
ABSTRACT
OBJECTIVE: This systematic review aimed to evaluate the effectiveness of conservative approaches on otologic signs and symptoms in patients affected by Menière's Disease (MD) and temporomandibular disorders (TMD). METHODS: PubMed, Scopus, and Web of Science were systematically searched to identify studies presenting participants with a diagnosis of MD associated with TMD, conservative approaches as interventions, and modification of the otological signs and symptoms as outcome. RESULTS: Out of 627 articles assessed for eligibility, two studies were included. Both studies showed a significant reduction of Situational Vertigo Questionnaire after treatment, number of vertigo spells, Functional Level Scale, Dizziness Hearing Inventory, and Tinnitus Handicap Inventory, after occlusal splint therapy. No significant differences were found in terms of pure-tone audiometry average. CONCLUSION: Findings of this systematic review suggested that conservative approaches might improve vertigo in patients affected by MD and TMD. However, the low number of included studies makes difficult to draw strong conclusions.
ABSTRACT
BACKGROUND: The term temporomandibular disorder (TMD) indicates a set of musculoskeletal conditions involving temporomandibular joint (TMJ), masticatory musculature, and related anatomical structures. Pain is the most common clinical manifestation of TMD, and the auditory system might be involved and affected, through tinnitus, dizziness, otalgia and ear fullness sensation. OBJECTIVES: The aim of this systematic review of randomised controlled trails (RCTs) was to evaluate the efficacy of rehabilitative approaches on otologic symptoms in patients with TMD. METHODS: PubMed, Scopus and Web of Science were systematically searched from the inception until 8th October 2023 to identify RCTs presenting participants with a diagnosis of TMD associated with otologic signs and symptoms, rehabilitative approaches as interventions, and modification of the otological symptoms as outcome. RESULTS: Out of 931 papers suitable for title/abstract screening, 627 articles were assessed for eligibility. Five studies were included reporting the efficacy of occlusal splint therapy, low-level laser therapies, and physical therapy in patients diagnosed whit secondary otalgia or tinnitus associated with TMD. No RCTs evaluating other otologic symptoms, ear fullness, dizziness or vertigo were found. CONCLUSIONS: Results of this systematic review suggested that rehabilitative approaches might be effective in improving secondary otalgia and tinnitus in TMD patients. Thus, further RCTs with a higher level of evidence and more representative samples should be conducted to better understand the effects of TMD therapy on otologic complains.
Subject(s)
Randomized Controlled Trials as Topic , Temporomandibular Joint Disorders , Tinnitus , Humans , Temporomandibular Joint Disorders/rehabilitation , Temporomandibular Joint Disorders/complications , Temporomandibular Joint Disorders/physiopathology , Treatment Outcome , Tinnitus/rehabilitation , Earache/rehabilitation , Occlusal Splints , Physical Therapy Modalities , Low-Level Light Therapy/methodsABSTRACT
This systematic review answers the question: "Does occlusal appliance use influence masticatory muscle function of dentate individuals with sleep bruxism?". The literature search included six databases, grey literature, and manual search for articles. Randomized and non-randomized clinical trials were included comparing muscle function of sleep bruxers before and after receiving occlusal appliances. Risk of bias was assessed with risk of bias assessment for randomized and non-randomized clinical trials tool. Twelve studies, three represent randomized clinical trials, were included. Risk of bias was considered low, moderate, or serious. Meta-analyses indicated that soft and hard appliances did not influence muscle activity and bite force of bruxers. Qualitative analysis showed that occlusal appliance use did not influence masticatory performance and muscle volume. However, it was effective in reducing tongue force. Certainty of evidence was considered very low for muscle activity when evaluated with hard appliances, and for bite force evaluated with both appliance materials. Low certainty of evidence was observed for muscle activity with soft appliances. Based on the findings of this meta-analysis, occlusal appliances do not affect masticatory muscle function of sleep bruxers. Regardless of appliance material, the activity of masseter and temporal, and bite force of sleep bruxers was not influenced.
Subject(s)
Bite Force , Masticatory Muscles , Occlusal Splints , Sleep Bruxism , Humans , Sleep Bruxism/physiopathology , Sleep Bruxism/therapy , Masticatory Muscles/physiopathologyABSTRACT
(1) Background: This study aims to compare the effects of 3D-printed splints and conventional manufactured splints on sleep bruxism (SB) EMG activity. (2) Methods: Twenty-six patients (19 M, 7 F, 25.8 ± 2.6 years) were randomly allocated to a study group (3D splints) and a control group (conventional manufactured splints) and followed for a period of three months with night EMG-ECG recordings. Samples of the involved materials were analyzed for nanoindentation. The outcomes of interest considered were the overall SB index, the total amount of surface masseter muscle activity (sMMA), and general and SB-related phasic and tonic contractions. A statistical evaluation was performed with a confidence interval (CI) between 2.5% and 97.5%. (3) Results: Differences between groups with OAs were observed for general tonic contraction (p = 0.0009), while differences between recording times were observed for general phasic contractions (p = 0.002) and general tonic contractions (p = 0.00001). Differences between recording times were observed for the total amount of sMMA (p = 0.01), for general phasic contractions (p = 0.0001), and for general tonic contractions (p = 0.000009) during night recordings without OAs. (4) Conclusions: Three-dimensional splints seem to have a higher impact on SB-related electromyographic activity but not on the overall sleep bruxism index. The more regular surfaces offered by 3D splints could be related to phasic contraction stabilization.
ABSTRACT
BACKGROUND: Sleep bruxism is a prevalent condition in dentistry practice, characterized by involuntary grinding or clenching of the teeth during sleep. Several therapies, including occlusal splints, have been used to manage sleep bruxism and temporomandibular disorders, including occlusal splints. This study aimed to compare the effectiveness of different occlusal splints in managing sleep bruxism. METHODS: The PICO framework encompasses the characterization of the population, intervention, comparison, and pertinent outcomes. A comprehensive and systematic literature review was conducted on PubMed, Scopus, and Google Scholar to identify grey literature. The search specifically targeted scientific studies published before September 20, 2023. The Cochrane Collaboration Risk of Bias Tool assessed the accuracy of the included Randomized Control Trials (RCTs). The modified Newcastle-Ottawa Scale assessed non-randomized studies. Data were systematically extracted, synthesized, and reported thematically. RESULTS: Out of the total of 808 articles that were evaluated, only 15 articles were found to meet the specified inclusion criteria. Adjustable splints, such as full-occlusion biofeedback splints, were more effective in reducing sleep bruxism episodes, improving patient-reported symptoms, and enhancing overall well-being. The impact of different occlusal sprints on electromyographic activity varies, and potential adverse effects should be considered individually. CONCLUSIONS: This review provides valuable insights into the effectiveness of occlusal splints in managing sleep bruxism. The results of this study indicate that occlusal splint therapy is a viable treatment approach for sleep bruxism.
Subject(s)
Occlusal Splints , Sleep Bruxism , Humans , Sleep Bruxism/therapy , SleepABSTRACT
PURPOSE: To investigate the effects of the number of ethylene oxide units in bis-EMA on the physical properties of additively manufactured occlusal splints. METHODS: Seven experimental materials containing bis-EMAs with three and 10 ethylene oxide units (BE3 and BE10, respectively) were prepared at different BE10 content rates (BE10-0%, -20%, -30%, -40%, -50%, -60%, and -80%). Half the specimens of each material were aged in boiling water. Flexural strength (FS), flexural modulus (FM), fracture toughness (FT), microwear depth (MD), degree of conversion (DC), water sorption (WSP), water solubility (WSL), color difference between non-aged and aged series (ΔE), and translucency (TP) were evaluated. All the evaluated properties other than FS and MD were analyzed by 1-way ANOVA and Tukey's post hoc analysis, while FS and MD were analyzed by Kruskal-Wallis's test and Bonferroni correction (α=0.05). RESULTS: BE10-80% revealed the lowest FS (P < 0.01 for BE10-0%, -20%, and -30%) and FM (P < 0.01, for all), while revealing the highest DC, WSP, WSL (P < 0.01 for all) and TP (P < 0.01 for all other than BE10-60%). BE10-50% showed the highest FT (P < 0.01 for all). BE10-50%, -60%, and -80% revealed significantly lower ΔE than others (P < 0.01) and lower MD than BE10-0% (P < 0.05). Regardless of the BE10 content, FS, FM, and FT decreased with aging. CONCLUSIONS: The number of ethylene oxide units affects the physical properties of additively manufactured occlusal splints. The higher number of ethylene oxide units in bis-EMA enhanced the microwear resistance, DC, WSP, WSL, color stability, and translucency, whereas it deteriorated the FS and FM.
ABSTRACT
INTRODUCTION: Bruxism is a spectrum of masticatory muscles activities. According to the recent evidence and international consensus, there is no indication to treat bruxism unless clinical consequences are present. The aim of the present study was to investigate the approach of Italian dentists to bruxism in their clinical practice. METHODS: An anonymous online survey was developed, composed by 26 items grouped into five sections: (1) Characteristics of the respondent (Q1-Q6); (2) Bruxism frequencies (Q7-Q11); (3) Bruxism assessment (Q12-Q15); (4) Bruxism management (Q16-Q20); (5) Occlusal splints therapy (Q21-Q26). RESULTS: A total of 384 practitioners, including specialists and non-specialists, participated in this survey. The majority of the respondents reported that 1-3 out of ten patients presented with bruxism. The diagnosis is mainly performed with non-instrumental methods, and facial pain and dental wear are the major clinical consequence associated with bruxism. Almost the entire sample of respondents report to offer occlusal splints to bruxism patients, and 41% refer to perform occlusal adjustments. Almost half of the respondents have never proposed any form of cognitive-behavioural therapy. CONCLUSION: The results of the current survey highlighted several inconsistencies in Italian dentists' approaches to bruxism, suggesting the need for better education of practitioners and for the development of a standardized protocol to assess and manage bruxism in dental practices.
Subject(s)
Bruxism , Humans , Bruxism/diagnosis , Bruxism/therapy , Dentists , Professional Role , Surveys and Questionnaires , ItalyABSTRACT
PURPOSE: To evaluate the impact of occlusal splint plus laser therapy (OS + LT) compared with OS alone on the patient-reported outcomes and clinical parameters of patients with temporomandibular disorders (TMDs). METHODS: Twenty-three patients with TMDs were randomly assigned to two treatment approaches: OS and OS + LT (multiwave locked system). The two outcomes were clinical parameters (mouth-opening distances, number of muscles and TMJs with pain) and patient-reported outcomes (pain score and oral health-related quality of life [OHRQoL] determined using the 14-item oral health impact profile [OHIP-14]). The outcomes were measured at four time points: baseline, 2 weeks, 1 and 3 months after treatment. According to DC/TMD Axis I classification, the participants were diagnosed as having pain only and pain with intraarticular joint disorder. Adjusting for age and sex, the outcome changes were analysed using generalized estimating models at a 5% significance level. RESULTS: The pain-free mouth-opening distance of the patients who received OS + LT continuously increased from 2 weeks to 3 months. However, the value was significantly increased at 3 months in patients who received OS alone. The unassisted mouth-opening distance significantly increased after 3 months in both groups. In both treatment approaches, the number of muscles and TMJs with pain, as well as the pain and OHIP-14 scores gradually decreased from baseline to 3 months. CONCLUSIONS: The patients who received OS and OS + LT demonstrated better OHRQoL and clinical parameters during 3 months after treatment. An improvement in the pain-free mouth-opening distance at 2 weeks was found only in OS plus LT group; however, this difference may not be clinically significant.
Subject(s)
Laser Therapy , Temporomandibular Joint Disorders , Humans , Occlusal Splints , Quality of Life , Treatment Outcome , Temporomandibular Joint Disorders/therapy , PainABSTRACT
OBJECTIVE: This study was conducted to present a completely digital workflow for the fabrication of occlusal stabilization splints using CAD/CAM systems and a digital face bow based on optical sensor technology. METHODS: Digital scans of the maxillary and mandibular arches of 20 volunteers were obtained using an intraoral scanner. Jaw relation and mandibular movements were recorded with a digital face bow via optical sensors. The virtual increase of the vertical dimension of occlusion (VDO) was then performed, after which computer-aided design (CAD) of the occlusal stabilization splints was carried out. The corresponding splints were then manufactured using digitally controlled technology. RESULTS: A completely digital workflow for the manufacturing of occlusal stabilization splints was found to be clinically feasible. The corresponding data analysis revealed high congruence between virtual and physical occlusal contacts on the occlusal splint. Moreover, the appropriate guidance of the anterior teeth area was easily obtainable, and the time for adjusting the occlusion was less. CONCLUSIONS: This study demonstrated that the fabrication of occlusal stabilization splints using a fully digital workflow is feasible. Compared to traditional impression-based manufacturing, several advantages of digital manufacturing include easy accessibility, time-efficient manufacturing, high-level accuracy in splint quality, and potential to manufacture duplicate splints. CLINICAL SIGNIFICANCE: The proposed fully digital approach may help young dentists fabricating stable occlusal splints with beneficial curative effects. Meanwhile, it could also improve the production efficiency of stable occlusal splints, saving time for both doctors and patients while reducing labor costs.
Subject(s)
Occlusal Splints , Splints , Humans , Workflow , Mandible , Dental Occlusion , Computer-Aided DesignABSTRACT
AIM: Studying the duration of treatment in patients with temporomandibular joint pain dysfunction syndrome, and the relationship of the duration of treatment with the age of the patient at the beginning of therapy. MATERIALS AND METHODS: The study was carried out using information from medical records of dental patients, information from additional examinations of patients who were treated at the National Medical Research Centre for Dentistry and Maxillofacial Surgery of the Ministry of Health of Russia from 2016 to 2022. Statistical research methods: to evaluate the normality of the distribution, graphical methods were used, as well as the Shapiro-Wilk criterion. RESULTS: The duration of splint therapy in patients with temporomandibular joint pain dysfunction syndrome varied from 4 to 27 months. The average duration of treatment of patients using occlusive splints was 10.5±5.3 months. Without abnormal observations, the average duration of splint therapy in patients with TMJ pain syndrome was 9.6±4.1 months. The obtained data allow stating the absence of a correlation between the age of patients and the duration of splint-therapy. CONCLUSION: The majority of patients (68.4%) complete the splint therapy stage within 1 year, and a very small part (1.8%) are treated for more than 1.5 years. The duration of treatment of patients with temporomandibular joint pain dysfunction syndrome does not depend on age or gender.
Subject(s)
Temporomandibular Joint Disorders , Temporomandibular Joint Dysfunction Syndrome , Humans , Splints , Temporomandibular Joint Disorders/therapy , Temporomandibular Joint Dysfunction Syndrome/therapy , Occlusal Splints , Pain , Treatment Outcome , Temporomandibular JointABSTRACT
OBJECTIVES: This clinical study aims to analyze the levels of cortisol, dehydroepiandrosterone (DHEA), and tumor necrosis factor alpha (TNF-α) in the gingival crevicular fluid (GCF) of persons with bruxism and to compare the efficacy of botulinum toxin (botox) and occlusal splint treatments through biomarkers. MATERIALS AND METHODS: A total of 40 patients with bruxism were selected according to the clinical examination and anamnesis of which 20 received occlusal splint treatment and 20 botox treatment. GCF samples were taken from the patients before and after treatment. Cortisol, DHEA, and TNF-α levels were measured by enzyme-linked immunosorbent assay test. The change in measurements between time and groups and the time-group interaction were tested by repeated measures ANOVA. RESULTS: There was a statistically significant difference between the cortisol levels before and after treatment in both groups (p = 0.001). In individuals with bruxism, a statistically significant decrease in cortisol levels was observed after both treatments (p < 0.05), while DHEA levels increased after treatment but were not statistically significant (p > 0.05). There was no statistically significant difference between TNF-α intra-group measurements (p > 0.05). CONCLUSIONS: Stress and inflammatory biomarkers were found to be associated with bruxism. Cortisol levels decreased in people with bruxism after treatment with both occlusal splint and botox. CLINICAL RELEVANCE: Both splint and botox treatments were effective for bruxism by reducing the stress levels.