Unlocking the Reverse Targeting Mechanisms of Cannabidiol: Unveiling New Therapeutic Avenues.

Cannabidiol (CBD) and Δ9-tetrahydrocannabinol (THC), the main components of Cannabis sativa plants, have attracted a significant amount of attention due to their biological activities. This study identified GPR18 as the target of partial agonist CBD activating the p42/p44 MAPK pathway leading to migration of endometrial epithelial cells. Induced fit docking (IFD) showed that the affinity of THC for GPR18 is higher than that of CBD, and molecular dynamics (MD) simulations showed that CBD-GPR18 complexes at 130/200 ns might have stable conformations, potentially activating GPR18 by changing the distances of key residues in its active pocket. In contrast, THC maintains "metastable" conformations, generating a "shrinking space" leading to full agonism of THC by adding mechanical constraints in GPR18's active pocket. Steered molecular dynamics (SMD) revealed GPR18's active pocket was influenced more by CBD's partial agonism compared with THC. This combined IFD-MD-SMD method may be used to explain the mechanism of activation of partial or full agonists of GPR18.

CBD Versus CBDP: Comparing In Vitro Receptor-Binding Activities.

Phytocannabinoids with seven-carbon alkyl chains (phorols) have gained a lot of attention, as they are commonly believed to be more potent versions of typical cannabinoids with shorter alkyl chains. At the time of this article, cannabidiphorol (CBDP) and tetrahydrocannabiphorol (THCP) can both be purchased in the North American market, even though their biological activities are nearly unknown. To investigate their relative potency, we conducted in vitro receptor-binding experiments with CBDP (cannabinoid CB1/CB2 receptor antagonism, serotonin 5HT-1A agonism, dopamine D2S (short form) agonism, and mu-opioid negative allosteric modulation) and compared the observed activity with that of CBD. To our knowledge, this is the first publication to investigate CBDP's receptor activity in vitro. A similar activity profile was observed for both CBD and CBDP, with the only notable difference at the CB2 receptor. Contrary to common expectations, CBD was found to be a slightly more potent CB2 antagonist than CBDP (p < 0.05). At the highest tested concentration, CBD demonstrated antagonist activity with a 33% maximum response of SR144528 (selective CB2 antagonist/inverse agonist). CBDP at the same concentration produced a weaker antagonist activity. A radioligand binding assay revealed that among cannabinoid and serotonin receptors, CB2 is likely the main biological target of CBDP. However, both CBD and CBDP were found to be significantly less potent than SR144528. The interaction of CBDP with the mu-opioid receptor (MOR) produced unexpected results. Although the cannabidiol family is considered to be a set of negative allosteric modulators (NAMs) of opioid receptors, we observed a significant increase in met-enkephalin-induced mu-opioid internalization when cells were incubated with 3 µM of CBDP and 1 µM met-enkephalin, a type of activity expected from positive allosteric modulators (PAMs). To provide a structural explanation for the observed PAM effect, we conducted molecular docking simulations. These simulations revealed the co-binding potential of CBDP (or CBD) and met-enkephalin to the MOR.

In situ forming PLA and PLGA implants for the parenteral administration of Cannabidiol.

Cannabidiol (CBD) is the main non-psychotropic cannabinoid. It has attracted a great deal of interest in the treatment of several diseases such as inflammatory disorders and cancer. Despite its promising clinical interest, its administration is very challenging. In situ forming implants (ISFIs) could be a simple and cheap strategy to administer CBD while obtaining a prolonged effect with a single administration. This work aims to design, develop, and characterize for the first time ISFIs for the parenteral administration of CBD with potential application in cancer disease. Formulations made of PLGA-502, PLGA-502H, and PLA-202 in NMP or DMSO and PLA-203 in DMSO at a polymer concentration of 0.25 mg/µL and loaded with CBD at a drug: polymer ratio of 2.5:100 and 5:100 (w/w) were developed. The formulations prepared with NMP exhibited a faster drug release. CBD implants elaborated with PLGA-502 and DMSO with the highest CBD: polymer ratio showed the most suitable drug release for one month. This formulation was successfully formed in ovo onto the chorioallantoic chick membrane without exhibiting signs of toxicity and exhibited a superior antiangiogenic activity than CBD in solution administered at the same doses. Consequently, implants made of PLGA-502 and DMSO represent a promising strategy to effectively administer CBD subcutaneously as combination therapy in cancer disease.

Enhancing cannabidiol bioaccessibility using ionic liquid as emulsifier to produce nanosystems: Characterization of structures, cytotoxicity assessment, and in vitro digestion.

The emulsifying potential of a biocompatible ionic liquid (IL) to produce lipid-based nanosystems developed to enhance the bioaccessibility of cannabidiol (CBD) was investigated. The IL (cholinium oleate) was evaluated at concentrations of 1 % and 2 % to produce nanoemulsions (NE-IL) and nanostructured lipid carriers (NLC-IL) loaded with CBD. The IL concentration of 1 % demonstrated to be sufficient to produce both NE-IL and NLC-IL with excellent stability properties, entrapment efficiency superior to 99 %, and CBD retention rate of 100 % during the storage period evaluated (i.e. 28 days at 25 °C). The in vitro digestion evaluation demonstrated that the NLC-IL provided a higher stability to the CBD, while the NE-IL improved the CBD bioaccessibility, which was mainly related to the composition of the lipid matrices used to obtain each nanosystem. Finally, it was observed that the CBD cytotoxicity was reduced when the compound was entrapped into both nanosystems.

Unraveling the Mechanisms of Cannabidiol's Pharmacological Actions: A Comprehensive Research Overview.

Cannabis sativa has long been used for neurological and psychological healing. Recently, cannabidiol (CBD) extracted from cannabis sativa has gained prominence in the medical field due to its non-psychotropic therapeutic effects on the central and peripheral nervous systems. CBD, also acting as a potent antioxidant, displays diverse clinical properties such as anticancer, antiinflammatory, antidepressant, antioxidant, antiemetic, anxiolytic, antiepileptic, and antipsychotic effects. In this review, we summarized the structural activity relationship of CBD with different receptors by both experimental and computational techniques and investigated the mechanism of interaction between related receptors and CBD. The discovery of structural activity relationship between CBD and target receptors would provide a direction to optimize the scaffold of CBD and its derivatives, which would give potential medical applications on CBD-based therapies in various illnesses.

Formulation Development and Evaluation of Cannabidiol Hot-Melt Extruded Solid Self-Emulsifying Drug Delivery System for Oral Applications.

Cannabidiol (CBD) is a highly lipophilic compound with poor oral bioavailability, due to poor aqueous solubility and extensive pre-systemic metabolism. The aim of this study was to explore the potential of employing Hot Melt Extrusion (HME) technology for the continuous production of Self Emulsifying Drug Delivery Systems (SEDDS) to improve the solubility and in vitro dissolution performance of CBD. Accordingly, different placebos were processed through HME in order to obtain a lead CBD loaded solid SEDDS. Two SEDDS were prepared with sesame oil, Poloxamer 188, Gelucire®59/14, PEO N80 and Soluplus®. Moreover, Vitamin E was added as an antioxidant. The SEDDS formulations demonstrated emulsification times of 9.19 and 9.30 min for F1 and F2 respectively. The formed emulsions showed smaller droplet size ranging from 150-400 nm that could improve lymphatic uptake of CBD and reduce first pass metabolism. Both formulations showed significantly faster in vitro dissolution rate (90% for F1 and 83% for F2) compared to 14% for the pure CBD within the first hour, giving an enhanced release profile. The formulations were tested for stability over a 60-day time period at 4°C, 25°C, and 40°C. Formulation F1 was stable over the 60-day time-period at 4°C. Therefore, the continuous HME technology could replace conventional methods for processing SEDDS and improve the oral delivery of CBD for better therapeutic outcomes.

New Polymeric Hydrogels with Cannabidiol and α-Terpineol as Potential Materials for Skin Regeneration-Synthesis and Physicochemical and Biological Characterization.

Dermatology and cosmetology currently prioritize healthy, youthful-looking skin. As a result, research is being conducted worldwide to uncover natural substances and carriers that allow for controlled release, which could aid in the battle against a variety of skin illnesses and slow the aging process. This study examined the biological and physicochemical features of novel hydrogels containing cannabidiol (CBD) and α-terpineol (TER). The hydrogels were obtained from ε-caprolactone (CL) and poly(ethylene glycol) (PEG) copolymers, diethylene glycol (DEG), poly(tetrahydrofuran) (PTHF), 1,6-diisocyanatohexane (HDI), and chitosan (CHT) components, whereas the biodegradable oligomers were synthesized using the enzyme ring-opening polymerization (e-ROP) method. The in vitro release rate of the active compounds from the hydrogels was characterized by mainly first-order kinetics, without a "burst release". The antimicrobial, anti-inflammatory, cytotoxic, antioxidant, and anti-aging qualities of the designed drug delivery systems (DDSs) were evaluated. The findings indicate that the hydrogel carriers that were developed have the ability to scavenge free radicals and impact the activity of antioxidant enzymes while avoiding any negative effects on keratinocytes and fibroblasts. Furthermore, they have anti-inflammatory qualities by impeding protein denaturation as well as the activity of proteinase and lipoxygenase. Additionally, their ability to reduce the multiplication of pathogenic bacteria and inhibit the activity of collagenase and elastase has been demonstrated. Thus, the developed hydrogel carriers may be effective systems for the controlled delivery of CBD, which may become a valuable tool for cosmetologists and dermatologists.

High-loading cannabidiol powders for inhalation.

Limited attempts have been made previously to develop high-loading CBD inhalable powders, which are essential for high dose delivery. Therefore, this study aimed to develop and characterise inhalable powders with ≥ 95 % w/w CBD by wet ball milling. The effects of magnesium stearate (2 % and 5 %) and inhaler resistance (low-resistance and high-resistance RS01 inhalers) on aerosol performance were also compared. Wet ball milling produced CBD powders with > 50 % production yield. The milled particles showed irregular shapes. The powders were crystalline with minimal amorphous content, low residual solvent level (<1%), and low moisture sorption (<4%). Magnesium stearate improved both the emitted and fine particle fractions. The aerodynamic particle size distribution of the formulations differed between the low-resistance and high-resistance RS01 inhalers. The latter decreased throat deposition but increased inhaler retention. The dissolution profiles showed that all three formulations released CBD steadily and plateaued at 30 min. The best scenario was CBD with 5 % magnesium stearate dispersed from the high resistance RS01 inhaler, showing the highest FPF with the lowest throat deposition. This combination may be tested in vivo in the future to investigate its pharmacokinetic profile.

Preparation and characterization of bionics Oleosomes with high loading efficiency: The enhancement of hydrophobic space and the effect of cholesterol.

Liposomes (LIP) loaded with natural active ingredients have significant potential in the food industry. However, their low loading efficiency (LE) hampers the advancement of liposomal products. To improve the loading capacity of functional compounds, bionic oleosomes (BOLE) with a monolayer of phospholipid membranes and a glyceryl tricaprylate/caprate (GTCC) oil core have first been engineered by high-pressure homogenization. TEM revealed that the core of BOLE consists of GTCC instead of water, thereby extending the hydrophobic space. Steady-state fluorescence and active loading experiments confirmed that cholesterol (CH) detached from the phospholipid membrane and entered the oil core, where it repelled cannabidiol (CBD). Based on the extending hydrophobic space, CBD-BOLE was prepared and its LE was 3.13 times higher than CBD-LIP. The CBD-phospholipid ratio (CPR) of CBD-BOLE significantly improved at least 7.8 times. Meanwhile, the free radical scavenging activity of CBD was increased and cytotoxicity was reduced.

Enhanced brain-targeting and efficacy of cannabidiol via RVG-Exo/CBD nanodelivery system.

This study introduces an innovative brain-targeted drug delivery system, RVG-Exo/CBD, utilizing rabies virus glycoprotein (RVG)-engineered exosomes for encapsulating cannabidiol (CBD). The novel delivery system was meticulously characterized, confirming the maintenance of exosomal integrity, size, and successful drug encapsulation with a high drug loading rate of 83.0 %. Evaluation of the RVG-Exo/CBD's brain-targeting capability demonstrated superior distribution and retention in brain tissue compared to unmodified exosomes, primarily validated through in vivo fluorescence imaging. The efficacy of this delivery system was assessed using a behavioral sensitization model in mice, where RVG-Exo/CBD notably suppressed methamphetamine-induced hyperactivity more effectively than CBD alone, indicating a reduction in effective dose and enhanced bioavailability. Overall, the RVG-Exo/CBD system emerges as a promising strategy for enhancing the therapeutic efficacy and safety of CBD, particularly for neurological applications, highlighting its potential for addressing the limitations associated with traditional CBD administration in clinical settings.

Minor Cannabinoids as Inhibitors of Skin Inflammation: Chemical Synthesis and Biological Evaluation.

Despite millennia of therapeutic plant use, deliberate exploitation of Cannabis's diverse biomedical potential has only recently gained attention. Bioactivity studies focus mainly on cannabidiol (CBD) and tetrahydrocannabinol (THC) with limited information about the broader cannabinome's "minor phytocannabinoids". In this context, our research targeted the synthesis of minor cannabinoids containing a lateral chain with 3 or 4 carbon atoms, focusing on cannabigerol (CBG) and cannabichromene (CBC) analogues. Using known and innovative strategies, we achieved the synthesis of 11 C3 and C4 analogues, five of which were inhibitors of skin inflammation, with the CBG-C4 ester derivative emerging as the most potent compound.

Development and characterization of pectin-based composite film incorporated with cannabidiol/2,6-di-O-methyl-ß-cyclodextrin inclusion complex for food packaging.

To reduce environmental pollution and improve human health, developing green active food packaging materials is very necessary. In this study, a novel antioxidant and antibacterial composite film was produced by incorporating inclusion complex (CDIC) of cannabidiol (CBD) with 2,6-di-O-methyl-ß-cyclodextrin (DM-ß-CD) into pectin. The pectin films loaded with CBD and hemp leaf water extract (HLE) were prepared for comparison. Comprehensive characterizations showed CBD was encapsulated by DM-ß-CD and CDIC was evenly dispersed into pectin matrix, forming the compact and intact film. The composite films showed good mechanical properties and biodegradability. CDIC film showed the highest transparency and smoothness (Rrms/Rmax: 2.6/16.8 nm). The addition of bioactives reduced the water-binding capacity and CDIC film had the strongest hydrophobicity. Besides, DM-ß-CD encapsulation improved the thermal stability of CBD in CDIC film. Benefiting from encapsulation and excellent bioactivities of CBD, CDIC film showed excellent antioxidant capacity and antibacterial activity, effectively inhibiting colony growth and maintaining the strawberry color in strawberry preservation. This work could provide a novel eco-friendly candidate for food packaging material and expand the use of CBD in food industry.

Nanosuspension-Loaded Dissolving Microneedle Patches for Enhanced Transdermal Delivery of a Highly Lipophilic Cannabidiol.

Purpose: Transdermal Drug Delivery System (TDDS) offers a promising alternative for delivering poorly soluble drugs, challenged by the stratum corneum's barrier effect, which restricts the pool of drug candidates suitable for TDDS. This study aims to establish a delivery platform specifically for highly lipophilic drugs requiring high doses (log P > 5, dose > 10 mg/kg/d), to improve their intradermal delivery and enhance solubility. Methods: Cannabidiol (CBD, log P = 5.91) served as the model drug. A CBD nanosuspension (CBD-NS) was prepared using a bottom-up method. The particle size, polydispersity index (PDI), zeta potential, and concentration of the CBD-NS were characterized. Subsequently, CBD-NS was incorporated into dissolving microneedles (DMNs) through a one-step manufacturing process. The intradermal dissolution abilities, physicochemical properties, mechanical strength, insertion depth, and release behavior of the DMNs were evaluated. Sprague-Dawley (SD) rats were utilized to assess the efficacy of the DMN patch in treating knee synovitis and to analyze its skin permeation kinetics and pharmacokinetic performance. Results: The CBD-NS, stabilized with Tween 80, exhibited a particle size of 166.83 ± 3.33 nm, a PDI of 0.21 ± 0.07, and a concentration of 46.11 ± 0.52 mg/mL. The DMN loaded with CBD-NS demonstrated favorable intradermal dissolution and mechanical properties. It effectively increased the delivery of CBD into the skin, extended the action's duration in vivo, and enhanced bioavailability. CBD-NS DMN exhibited superior therapeutic efficacy and safety in a rat model of knee synovitis, significantly inhibiting TNF-α and IL-1ß compared with the methotrexate subcutaneous injection method. Conclusion: NS technology effectively enhances the solubility of the poorly soluble drug CBD, while DMN facilitates penetration, extends the duration of action in vivo, and improves bioavailability. Furthermore, CBD has shown promising therapeutic outcomes in treating knee synovitis. This innovative drug delivery system is expected to offer a more efficient solution for the administration of highly lipophilic drugs akin to CBD, thereby facilitating high-dose administration.

Key Transdermal Patch Using Cannabidiol-Loaded Nanocarriers with Better Pharmacokinetics in vivo.

Purpose: Cannabidiol (CBD) is a promising therapeutic drug with low addictive potential and a favorable safety profile. However, CBD did face certain challenges, including poor solubility in water and low oral bioavailability. To harness the potential of CBD by combining it with a transdermal drug delivery system (TDDS). This innovative approach sought to develop a transdermal patch dosage form with micellar vesicular nanocarriers to enhance the bioavailability of CBD, leading to improved therapeutic outcomes. Methods: A skin-penetrating micellar vesicular nanocarriers, prepared using nano emulsion method, cannabidiol loaded transdermal nanocarriers-12 (CTD-12) was presented with a small particle size, high encapsulation efficiency, and a drug-loaded ratio for CBD. The skin permeation ability used Strat-M™ membrane with a transdermal diffusion system to evaluate the CTD and patch of CTD-12 (PCTD-12) within 24 hrs. PCTD-12 was used in a preliminary pharmacokinetic study in rats to demonstrate the potential of the developed transdermal nanocarrier drug patch for future applications. Results: In the transdermal application of CTD-12, the relative bioavailability of the formulation was 3.68 ± 0.17-fold greater than in the free CBD application. Moreover, PCTD-12 indicated 2.46 ± 0.18-fold higher relative bioavailability comparing with free CBD patch in the ex vivo evaluation. Most importantly, in the pharmacokinetics of PCTD-12, the relative bioavailability of PCTD-12 was 9.47 ± 0.88-fold higher than in the oral application. Conclusion: CTD-12, a transdermal nanocarrier, represents a promising approach for CBD delivery, suggesting its potential as an effective transdermal dosage form.

Cannabidiol-Loaded Solid Lipid Nanoparticles Ameliorate the Inhibition of Proinflammatory Cytokines and Free Radicals in an In Vitro Inflammation-Induced Cell Model.

Cannabidiol (CBD) is a non-psychoactive compound derived from Cannabis sativa. It has demonstrated promising effects in combating inflammation and holds potential as a treatment for the progression of chronic inflammation. However, the clinical application of CBD is limited due to its poor solubility and bioavailability. This study introduces an effective method for preparing CBD-loaded solid lipid nanoparticles (CBD-SLNs) using a combination of low-energy hot homogenization and ultrasonication. We enhanced this process by employing statistical optimization with response surface methodology (RSM). The optimized CBD-SLN formulation utilizes glyceryl monostearate as the primary lipid component of the nanocarrier. The CBD-SLN formulation is screened as a potential tool for managing chronic inflammation. Stable, uniformly dispersed spherical nanoparticles with a size of 123 nm, a surface charge of -32.1 mV, an encapsulation efficiency of 95.16%, and a drug loading of 2.36% were obtained. The CBD-SLNs exhibited sustained release properties, ensuring prolonged and controlled CBD delivery, which could potentially amplify its therapeutic effects. Additionally, we observed that CBD-SLNs significantly reduced both reactive oxygen and nitrogen species and proinflammatory cytokines in chondrocyte and macrophage cell lines, with these inhibitory effects being more pronounced than those of free CBD. In conclusion, CBD-SLNs demonstrated superiority over free CBD, highlighting its potential as an effective delivery system for CBD.

Photodegradation of cannabidiol (CBD) and Δ9-THC in cannabis plant material.

Δ9-THC, the psychotropic cannabinoid in Cannabis sativa L., for many years has been the focus of all the pharmacological attention as the main promising principle of the plant. Recently, however, cannabidiol (CBD) has brought a sudden change in the scenario, exponentially increasing the interest in pharmacology as the main non-psychotropic cannabinoid with potential therapeutic, cosmetical and clinical applications. Although the reactivity of CBD and Δ9-THC has been considered, little attention has been paid to the possible photodegradation of these cannabinoids in the vegetal matrix and the data available in the literature are, in some cases, contradictory. The aim of the present work is to provide a characterization of the photochemical behaviour of CBD and Δ9-THC in three cannabis chemotypes, namely I (Δ9-THC 2.50%w/w), II (CBD:Δ9-THC 5.82%w/w:3.19%w/w) and III (CBD 3.02%w/w).

Differentiation of Δ9-THC and CBD Using Silver-Ligand Ion Complexation and Electrospray Ionization Tandem Mass Spectrometry (ESI-MS/MS).

The 2018 Farm Bill defines marijuana as Cannabis sativa L. or any derivative thereof that contains greater than 0.3% Δ9-tetrahydrocannabinol (Δ9-THC) on a dry weight basis. The main cannabinoids present in Cannabis sativa L., Δ9-THC and cannabidiol (CBD), are structural isomers that cannot be differentiated using direct mass spectrometry with soft ionization techniques alone. Due to the classification of marijuana as a Schedule I controlled substance, the differentiation of Δ9-THC and CBD is crucial within the seized drug community. This study explores the use of Ag-ligand ion complexation and electrospray ionization tandem mass spectrometry (ESI-MS/MS) for the differentiation of Δ9-THC and CBD using six different Ag complexes. Differences between the binding affinities of Δ9-THC and CBD for [Ag(PPh3)(OTf)]2 lead to the formation of unique product ions at m/z 421/423, m/z 353/355, and m/z 231 for CBD, enabling the differentiation of CBD from Δ9-THC. When applied to the analysis of known Δ9-THC:CBD mixture ratios, the developed [Ag(PPh3)(OTf)]2 ion complexation method was able to differentiate Δ9-THC-rich and CBD-rich samples based on the average abundance of the product ions at m/z 421/423. The developed approach was then applied to methanolic extracts of 20 authentic cannabis samples with known Δ9-THC and CBD compositions, resulting in a 95% correct classification rate. Even though the developed Ag-ligand ion complexation method was only demonstrated for the qualitative differentiation of Δ9-THC-rich and CBD-rich cannabis, this study establishes a foundation for the use of Ag-ligand ion complexation that is essential for future quantitative approaches.

Spray freeze dried cannabidiol with dipalmitoylphosphatidylcholine (DPPC) for inhalation and solubility enhancement.

Pulmonary delivery is an efficient route of administration to deliver cannabidiol (CBD) due to the high bioavailability and fast onset of action. The major formulation challenge is the poor aqueous solubility of CBD. This study aimed to produce inhalable CBD powders with enhanced solubility and characterise their solid-state properties. CBD was spray freeze dried with mannitol or trehalose dihydrate with and without dipalmitoylphosphatidylcholine (DPPC). All four powders had acceptable yields at > 70 % with porous and spherical particles. The two crystalline mannitol powders contained less residual solvent than both amorphous trehalose ones. The addition of DPPC did not affect the crystallinity and residual solvent level of the powders. Instead, DPPC made the particles more porous, decreased the particle size from 19-23 µm to 11-13 µm, and increased CBD solubility from 0.36 µg/mL to over 2 µg/mL. The two DPPC powders were dispersed from a low resistance RS01 inhaler, showing acceptable aerosol performance with emitted fractions at 91-93 % and fine particle fractions < 5 µm at 34-43 %. These formulations can be used as a platform to deliver CBD and other cannabinoids by inhalation.

Harnessing therapeutic deep eutectic solvents in self-emulsifying systems to improve CBD delivery.

In this study, Cannabidiol crystals (CBD) were used as a BCS class II model drug to generate a novel therapeutic deep eutectic solvent (THEDES) with easy preparation using caprylic acid (CA). The hydrogen bonding interaction was confirmed by different techniques such as FT-IR and NMR, resulting in a hydrophobic system suitable for liquid formulations. The CBD-based THEDES, combined with a specific mixture of surfactants and co-surfactants, successfully formed a self-emulsifying drug delivery system (SEDDS) that generated uniform nano-sized droplets once dispersed in water. Hence, the THEDES showed compatibility with the self-emulsifying approach, offering an alternative method to load drugs at their therapeutic dosage. Physical stability concerns regarding the unconventional oily phase were addressed through stress tests using multiple and dynamic light scattering, demonstrating the robustness of the system. In addition, the formulated SEDDS proved effective in protecting CBD from the harsh acidic gastric environment for up to 2 h at pH 1.2. Furthermore, in vitro studies have confirmed the safety of the formulation and the ability of CBD to permeate Caco-2 cells when formulated. This investigation highlights the potential incorporation of THEDES in lipid-based formulations like SEDDS, expanding the avenues for innovative oral drug delivery approaches.

Research Progress on the Mechanism of the Antitumor Effects of Cannabidiol.

Cannabidiol (CBD), a non-psychoactive ingredient extracted from the hemp plant, has shown therapeutic effects in a variety of diseases, including anxiety, nervous system disorders, inflammation, and tumors. CBD can exert its antitumor effect by regulating the cell cycle, inducing tumor cell apoptosis and autophagy, and inhibiting tumor cell invasion, migration, and angiogenesis. This article reviews the proposed antitumor mechanisms of CBD, aiming to provide references for the clinical treatment of tumor diseases and the rational use of CBD.