Tableting behavior of freeze and spray-dried excipients in pharmaceutical formulations.

Most of biopharmaceuticals, in their liquid form, are prone to instabilities during storage. In order to improve their stability, lyophilization is the most commonly used drying technique in the pharmaceutical industry. In addition, certain applications of biopharmaceutical products can be considered by oral administration and tablets are the most frequent solid pharmaceutical dosage form used for oral route. Thus, the tableting properties of freeze-dried products used as cryo and lyoprotectant could be a key element for future pharmaceutical developments and applications. In this study, we investigated the properties that might play a particular role in the specific compaction behavior of freeze-dried excipients. The tableting properties of freeze-dried trehalose, lactose and mannitol were investigated and compared to other forms of these excipients (spray-dried, commercial crystalline and commercial crystalline milled powders). The obtained results showed a specific behavior in terms of compressibility, tabletability and brittleness for the amorphous powders obtained after freeze-drying. The comparison with the other powders showed that this specific tableting behavior is linked to both the specific texture and the physical state (amorphization) of these freeze-dried powders.

The Fabrication, Drug Loading, and Release Behavior of Porous Mannitol.

Porous materials are widely used as an effective strategy for the solubilization of insoluble drugs. In order to improve the solubility and bioavailability of low water-solubility drugs, it is necessary to prepare porous materials. Mannitol is one of the most popular excipients in food and drug formulations. In this study, porous mannitol was investigated as a drug carrier for low water solubility drugs. Its fabrication, drug loading, and drug release mechanisms were investigated. Porous mannitol was fabricated using the co-spray-antisolvent process and utilizing polyvinylpyrrolidone K30 (PVP K30) as the template agent. Porous mannitol particles were prepared by changing the proportion of the template agent, spraying the particles with mannitol, and eluting with ethanol in order to regulate their pore structure. In subsequent studies, porous mannitol morphology and characteristics were determined systematically. Furthermore, curcumin and ibuprofen, two poorly water-soluble drugs, were loaded into porous mannitol, and their release profiles were analyzed. The results of the study indicated that porous mannitol can be prepared using PVP K30 as a template and that the amount of template agent can be adjusted in order to control the structure of the porous mannitol. When the template agent was added in amounts of 1%, 3%, and 5%, the mannitol pore size increased by 167.80%, 95.16%, and 163.98%, respectively, compared to raw mannitol. Molecular docking revealed that mannitol and drugs are adsorbents and adhere to each other by force interaction. The cumulative dissolution of curcumin and ibuprofen-loaded porous mannitol reached 69% and 70%, respectively. The release mechanism of curcumin and ibuprofen from drug-loaded mannitol was suitable for the Korsmeyer-Peppas kinetic model. In summary, the co-spray-antisolvent method proved effective in fabricating porous materials rapidly, and porous mannitol had a remarkable effect on drug solubilization. The results obtained are conducive to the development of porous materials.

Crystal defects creation in Mannitol@CaCl2 metal-organic framework by induced dehydration strategy for enhanced excipient mechanical properties.

The mechanical properties of solid pharmaceutical excipients are important for assisting drug tables production, and they determine the quality of the drug tablets. The purpose of this study was to explore the potential and mechanism of crystal defect engineering to improve the mechanical properties of Mannitol@CaCl2 MOF, a pharmaceutical excipient with metal-organic framework (MOF) structure designed and prepared in our previous study. In this study, a simple and efficient "induced dehydration strategy" was proposed to prepare Mannitol@CaCl2 MOF with crystal defects (DEMOF). SEM, TEM, HRTEM, PXRD, FTIR, DSC-TGA, and N2 adsorption-desorption isotherm revealed the successful introduction of lattice vacancy and macrostructural defects while preserving MOF's skeleton structure. Tabletability profiles indicated that DEMOF presented much better mechanical properties than the original MOF at the powder level. On single crystal and atomic scales, nanoindentation and DFT calculations revealed that the defect structure increased plasticity, decreased brittleness, and improved compressibility, resulting in DEMOF tablets with much higher tensile strength that met the criteria for direct compression excipients. The achieved performance modification illustrated the capability of defect engineering to tune mechanical properties of MOFs, and the Mannitol@CaCl2 DEMOF exhibited great potential to serve as a new direct compression pharmaceutical excipient.

Effects of freezing and drying programs on IgY aggregation and activity during microwave freeze-drying: Protective effects and interactions of trehalose and mannitol.

The acquisition of high quality lyophilized IgY products, characterized by an aesthetically pleasing visage, heightened stability, and a marked preservation of activity, constitutes an indispensable pursuit in augmenting the safety and pragmatic utility of IgY. Within this context, an exploration was undertaken to investigate an innovative modality encompassing microwave freeze-drying (MFD) as a preparatory methodology of IgY. Morphological assessments revealed that both cryogenic freezing and subsequent MFD procedures resulted in aggregation of IgY, with the deleterious influence posed by the MFD phase transcending that of the freezing phase. The composite protective agent comprised of trehalose and mannitol engendered a safeguarding effect on the structural integrity of IgY, thereby attenuating reducing aggregation between IgY during the freeze-drying process. Enzyme-linked immunosorbent assay (ELISA) outcomes demonstrated a discernible correlation between IgY aggregation and a notable reduction in its binding affinity towards the pertinent antigen. Comparative analysis vis-à-vis the control sample delineated that when the trehalose-to-mannitol ratio was upheld at 1:3, a two-fold outcome was achieved: a mitigation of the collapse susceptibility within the final product as well as a deterrence of IgY agglomeration, concomitant with an elevated preservation rate of active antibodies (78.57 %).

Understanding the impact of mannitol on physical stability and aerosolization of spray-dried protein powders for inhalation.

Pulmonary delivery of protein-based therapeutics, including antibodies, is a promising option for treating respiratory diseases. Spray drying is a widely used method for producing dry powder formulations with mannitol being a commonly used excipient for these inhalation formulations. There is limited research available concerning the utilization of mannitol as an excipient in the spray drying of proteins and its impact on aerosol performance. This study highlights the importance to understand mannitol's potential role and impact in this context. To investigate the impact of mannitol on physical stability and aerosolization of spray-dried protein formulations, bovine serum albumin (BSA) was employed as a model protein and formulated with different concentrations of mannitol via spray drying. The spray-dried solids were characterized for their particle size using Malvern mastersizer and aerodynamic particle size using next generation impactor (NGI). Additionally, the solids were characterized with solid-state Fourier-transform infrared spectroscopy (ssFTIR), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and solid-state nuclear magnetic resonance spectroscopy (ssNMR) to analyze the change in their secondary structure, crystallinity, particle morphology, and protein-excipient interaction, respectively. Size exclusion chromatography (SEC) was used to investigate changes in monomer content resulting from storage under stressed condition of 40 °C. Protein formulations containing more than 33 % mannitol by weight showed crystallization tendencies, causing an increase in monomer loss over time. ssNMR data also showed mixing heterogeneity of BSA and mannitol in the formulations with high mannitol contents. Futhermore, fine particle fraction (FPF) was found to decrease over time for the formulations containing BSA: Mannitol in the ratios of 2:1, 1:2, and 1:5, due to particle agglomeration induced by crystallization of mannitol. This study underscores the significant influence of excipients such as mannitol on the aerosol performance and storage stability of spray-dried protein formulations.

Development of a novel direct compressible co-processed excipient and its application for formulation of Mirtazapine orally disintegrating tablets.

INTRODUCTION: Orally disintegrating tablets (ODTs) are designed to dissolve in the oral cavity within 3 min, providing a convenient option for patients as they can be taken without water. Direct compression is the most common method used for ODTs formulations. However, the availability of single composite excipients with desirable characteristics such as good compressibility, fast disintegration, and a good mouthfeel suitable for direct compression is limited. OBJECTIVE: This research was proposed to develop a co-processed excipient composed of xylitol, mannitol, and microcrystalline cellulose for the formulation of ODTs. METHODS: A total of 11 formulations of co-processed excipients with different ratios of ingredients were prepared, which were then compressed into ODTs, and their characteristics were thoroughly examined. The primary focus was on evaluating the disintegration time and hardness of the tablets, as these factors are important in ensuring the ODTs meet the desired criteria. The model drug, Mirtazapine was then incorporated into the chosen optimized formulation. RESULTS: The results showed that the formulation comprised of 10% xylitol, 10% mannitol and 80% microcrystalline cellulose demonstrated the fastest disintegration time (1.77 ± 0.119 min) and sufficient hardness (3.521 ± 0.143 kg) compared to the other formulations. Furthermore, the drug was uniformly distributed within the tablets and fully released within 15 min. CONCLUSION: Therefore, the developed co-processed excipients show great potential in enhancing the functionalities of ODTs, offering a promising solution to improve the overall performance and usability of ODTs in various therapeutic applications.

Development of a Novel Co-processed Excipitient Comprising of Xylitol, Mannitol, Microcrystalline Cellulose, and Crospovidone for the Compounding of Memantine Hydrochloride Orally Disintegrating Tablet.

Orally disintegrating tablets, which were originally developed in the pharmaceutical field to improve the compliance of patients who had difficulty swallowing tablets, have become a preferable choice in solid dosage forms since it brings advantages to the patients and consumers in the healthcare system. Among the advantages of this novel dosage form are a faster onset of action, improved bioavailability, and the ease of administration as it can be taken without water. However, there are still some limitations of orally disintegrating tablets that need to be overcome, including a lack of mechanical strength, an unpleasant taste of the drug in the mouth, and a stability issue due to its hygroscopicity nature. This objective of this study was to identify the composition of co-processed excipients comprising of mannitol, microcrystalline cellulose, xylitol, and crospovidone or croscarmellose sodium in order to formulate orally disintegrating tablets containing memantine hydrochloride. This study was carried out in two stages. Firstly, orally disintegrating tablets containing memantine hydrochloride with 6 different formulations, which differed in the percentage of crospovidone or croscarmellose sodium, were formulated and manufactured. Secondly, the orally disintegrating tablets obtained were evaluated through pre- and post-compression tests based on the standard for orally disintegrating tablets. Formulation 3, which consisted of 10% xylitol, 10% mannitol, 72% microcrystalline cellulose, and 8% crospovidone, was chosen as the optimum formulation for the co-processed excipient since it was the fastest disintegration process among all the formulations in the study. In addition, Formulation 3 also showed the acceptable and satisfying results in other evaluation tests such as - weight variation test, hardness test, and friability test. The co-processed excipient comprising of 10% xylitol, 10% mannitol, 72% microcrystalline cellulose, and 8% crospovidone, which is characterized by improved functionalities such as a fast disintegration process, plays a crucial role in the application of orally disintegrating tablets.

Effect of Material Properties and Variability of Mannitol on Tablet Formulation Development.

PURPOSE: Using a high level of mannitol as a diluent in oral formulations can potentially result in tablet defects (e.g., chipping, cracking) during compression. This work aims to scrutinize the linkage between the mechanical properties and material attributes of mannitol and also uncover how variations between vendors and lots can lead to significant changes in the compaction performance of tablet formulations containing mannitol. METHODS: The mechanical properties (Poisson's ratio, fracture energy) and mechanical performance (ejection force, pressure transmission ratio, residual radial die-wall stress, and tensile strength) of mannitol compacts were assessed on a compaction simulator for four lots of mannitol from two different vendors. The variation of material attributes of each lot, including particle size distribution (PSD), crystal form, primary crystal size and morphology, specific surface area (SSA), powder flow, and moisture absorption were investigated. RESULTS: The variability of material attributes in mannitol lots, especially primary crystal size and SSA, can result in significant changes in mechanical properties and mechanical performance such as ejection force and residual radial die-wall stresses, which potentially led to chipping during compression. CONCLUSION: The study elucidated the linkage between fundamental material attributes and mechanical properties of mannitol, highlighting their impact on tablet defects and compaction performance in compression. A comprehensive understanding of the variability in mannitol properties between vendors and lots is crucial for successful formulation development, particularly when high percentages of mannitol are included as a brittle excipient.

Effect of co-processed excipient type on properties of orodispersible tablets containing captopril, tramadol, and domperidone.

An important feature of orodispersible tablets (ODTs) is the convenient administration of the drugs, in some cases, faster onset of action, stability maintenance, and dose precision. This work focused on the preparation of ODTs containing mannitol-based co-processed excipients Prosolv® ODT G2, Ludiflash® and Parteck® ODT in combination with tramadol, captopril, and domperidone by direct compression. Prosolv® ODT G2 showed high energy of plastic deformation due to the content of microcrystalline cellulose. Parteck® ODT provided compact tablets due to the content of granulated mannitol. All drugs decreased tensile strength, increased friability, prolonged disintegration time, and decreased the porosity of tablets. Tablets containing Prosolv® ODT G2 with captopril, domperidone, and tramadol; and Parteck® ODT with domperidone met the requirements for ODTs production, i.e., friability ≤ 1% and disintegration time ≤ 180 s, fast wetting time, high water absorption ratio, and adequate tensile strength. The disintegration time was tested using both the pharmacopeial method and the BJKSN-13 apparatus. The results indicate the significant difference between these methods, with the disintegration time being longer when tested with the BJKSN-13 instrument.

In-situ investigation of solid phase evolution during lyophilization of mannitol-based antibody formulations using an XRPD climate chamber.

Crystalline mannitol is commonly used as bulking agent in antibody formulations to provide structure to the lyophilized cake and prevent collapse. Depending on the lyophilization process conditions mannitol can either crystallize as α-, ß-, δ-mannitol, mannitol-hemihydrate, or transition to its amorphous state. While crystalline mannitol helps to create a firmer cake structure this is not true for amorphous mannitol. The hemihydrate is also an undesired physical form as it may reduce the drug product stability by releasing bound water molecules into the cake. Our aim was to simulate lyophilization processes in an X-ray powder diffraction (XRPD) climate chamber. In the climate chamber, the process can be carried out fast with low sample quantities to determine optimal process conditions. Insights on the emergence of desired anhydrous mannitol forms helps to adjust the process parameters in larger scale freeze-dryers. In our study we have identified the critical process steps for our formulations and then varied relevant process parameters, which were the annealing temperature, annealing time and temperature ramp rate of the freeze-drying process. Furthermore, the effect of the presence of antibodies on excipient crystallization was investigated by performing the studies on placebo solutions versus two respective antibody formulations. A comparison of the products obtained in a freeze-dryer and the simulated process in the climate chamber showed good accordance demonstrating the method as suitable tool to identify ideal process conditions on a laboratory scale.

Raman Marker Bands for Secondary Structure Changes of Frozen Therapeutic Monoclonal Antibody Formulations During Thawing.

In this work we use Raman spectroscopy for protein characterization in the frozen state. We investigate the behavior of frozen therapeutic monoclonal antibody IgG1 formulation upon thawing by Raman spectroscopy. Secondary and tertiary structure of the protein in three different mab formulations in the frozen state are followed through observation of marker bands for α-helix, ß-sheet and random coil. We identify the tyrosine intensity ratio I856/I830 as a marker for mab aggregation. Upon fast cooling (40 °C/min) to -80 °C we observe a significant increase of random coil and α -helical structures, while this is not the case for slower cooling (20 °C/min) to -80 °C. Most changes in the protein's secondary structure are observed in the course of thawing in the range up to -20 °C, when passing through the glass transitions and cold-crystallization of the two types of freeze-concentrated solutions formed through macro- and microcryoconcentration. An increase of protein concentration and the addition of mannitol suppress secondary structural changes but do no impact on aggregation.

Preparation of Loratadine Orally Disintegrating Tablets by Semi-solid Extrusion 3D Printing.

BACKGROUND: The orally disintegrating tablets (ODTs) are especially suitable for elders and children with dysphagia, who need to be given customized dosages. OBJECTIVES: This study aimed to prepare orally disintegrating tablets (ODTs) which can be customized as drug content by using semi-solid 3D printing pressure extrusion technology, with water insoluble and thermally unstable drug loratadine. METHODS: The influence of binder concentration, disintegrating agent dosage and ratio mannitol: cellulose on formability and disintegration time was investigated. The properties of orally disintegrating tablets were investigated by ATR-FTIR, XRPD, DSC and SEM. The correlation formula between tablet bottom area and drug content was established. RESULTS: The formulation was optimized, and contained loratadine 3 g, cellulose 4 g, mannitol 2 g, carboxy methyl starch sodium 1g, 6% PVP K30 16 ml. The disintegration time was less than 60 s with infilling percentage of 60%, and the disintegration time was less than 30 s with infilling percentage of 40%. There was no detectable interaction between loratadine and the selected excipients by the analysis of ATR-FTIR, DSC and XRPD. The structure of the tablets was porous, and the drug was dissolved completely within 10 min. The drug content (x) of the tablet and the bottom area (y) of the tablet showed a linear fitting relationship, y = 3.8603x - 0.7176, r2 = 0.9993. CONCLUSION: Semi-solid extrusion of 3D printing technology was applied to prepare loratadine orally disintegrating tablets with customized drug content, which provides an alternative method for the research of customized preparation.

Development of spray-dried N-acetylcysteine dry powder for inhalation.

N-acetylcysteine (NAC) has both antioxidant and immunomodulatory activities and has been used as adjuvant therapy in several viral infections. Recently, NAC attracted attention for its possible role in reducing the affinity of the spike protein receptor binding domain to angiotensin-converting enzyme (ACE2) receptors. Since only NAC solutions are available for inhalation, the purpose of the work was to develop a NAC dry powder for inhalation using mannitol or leucine as excipient. The powder was successfully produced using co-spray-drying with leucine. ATR-FTIR analyses evidenced spectral variations ascribed to the formation of specific interactions between NAC and leucine. This effect on the NAC environment was not evident for NAC-mannitol powders, but mannitol was in a different polymorphic form compared to the supplied material. Both the feedstock concentration and the leucine content have an impact on the powder aerodynamic features. In particular, to maximize the respirable fraction, it is preferable to produce the powder starting from a 0.5 % w/v feedstock solution using 33 to 50 % w/w leucine content. The NAC-leucine powder was stable for ten months maintaining NAC content of 50 % (w/w) and about 200 µg of NAC was able to deposit on a transwell insert, useful for future in vitro studies.

Relative Humidity Cycling: Implications on the Stability of Moisture-Sensitive Drugs in Solid Pharmaceutical Products.

The stability of a moisture-sensitive drug in tablet formulations depends particularly on the environment's relative humidity (RH) and the products' prior exposure to moisture. This study was designed to understand drug stability in relation to the moisture interaction of the excipients, moisture history of the tablets, and RH of the environment. The stability study was performed on tablets containing acetylsalicylic acid (ASA), formulated with common pharmaceutical excipients like native maize starch, microcrystalline cellulose (MCC), partially pregelatinized maize starch (PGS), dicalcium phosphate dihydrate (DCP), lactose, and mannitol. The tablets were subjected to storage conditions with RH cycling alternating between 53% and 75%. Results were also compared to tablets stored at a constant RH of 53% or 75%. The excipients demonstrated marked differences in their interactions with moisture. They could be broadly grouped as excipients with RH-dependent moisture content (native maize starch, MCC, and PGS) and RH-independent moisture content (DCP, lactose, and mannitol). As each excipient interacted differently with moisture, degradation of ASA in the tablets depended on the excipients' ability to modulate the moisture availability for degradation. The lowest ASA degradation was observed in tablets formulated with low moisture content water-soluble excipients, such as lactose and mannitol. The impact of RH cycling on ASA stability was apparent in tablets containing native maize starch, MCC, PGS, or DCP. These findings suggested that the choice of excipients influences the effect of moisture history on drug stability. The results from studies investigating moisture interaction of excipients and drug stability are valuable to understanding the inter-relationship between excipients, moisture history, and drug stability.

Frozen storage of proteins: Use of mannitol to generate a homogenous freeze-concentrate.

Therapeutic proteins may be subjected to several freeze-thaw cycles throughout manufacturing and storage. The protein solution composition and the freezing conditions may lead to incomplete ice crystallization in the frozen state. This can also result in freeze-concentrate heterogeneity characterized by multiple glass transition temperatures and protein destabilization. The overall objective was to investigate the potential advantages of including a crystallizing excipient (mannitol) along with a sugar (sucrose or trehalose) for frozen storage. This study showed that the addition of mannitol, a readily crystallizing excipient, facilitated ice crystallization. Inclusion of an isothermal hold during cooling (annealing) maximized the mannitol crystallization and resulted in a homogenous freeze-concentrate of a constant composition characterized by a single glass transition temperature. The role of freezing rate and annealing on both mannitol and ice crystallization were discerned using high intensity synchrotron radiation. The addition of sucrose or trehalose, at an appropriate concentration, stabilized the protein. The mannitol to sugar ratio (3:1 or 1:1, 5 % w/v) was optimized to selectively cause maximal crystallization of mannitol while retaining the sugar amorphous. Human serum albumin (1 mg/mL) in these optimized and annealed compositions did not show any meaningful aggregation, even after multiple freeze-thaw cycles. Thus, in addition to a sugar as a stabilizer, the use of a crystallizing excipient coupled with an annealing step can provide an avenue for frozen storage of proteins.

Radio Frequency - Assisted Ultrasonic Spray Freeze Drying for Pharmaceutical Protein Solids.

This study examined physical stability of spray freeze dried (SFD) bovine serum albumin (BSA) solids produced using the radio frequency (RF)-assisted drying technique. BSA formulations were prepared with varying concentrations of trehalose and mannitol, using an excipient-free formulation as control. These formulations were produced using either traditional ultrasonic spray freeze drying (SFD) or RF-assisted ultrasonic spray freeze drying (RFSFD). The dried formulations were then characterized using Karl Fischer moisture content measurement, powder X-ray diffraction (PXRD), size exclusion chromatography (SEC), and solid-state hydrogen/deuterium exchange with mass spectrometry (ssHDX-MS). Moisture content did not have a good correlation with the physical stability of the formulations measured by SEC. ssHDX-MS metrics such as deconvoluted peak areas of the deuterated samples showed a satisfactory correlation (R2 = 0.914) with the SEC stability data. RFSFD improved the stability of formulations with 20 mg/ml of trehalose and no mannitol, and had similar stability with all other formulations as compared to SFD. This study demonstrated that RFSFD technique can significantly reduce the duration of primary drying cycle from 48.0 h to 27.5 h while maintaining or improving protein physical stability as compared to traditional lyophilization.

Mannitol as an Excipient for Lyophilized Injectable Formulations.

The review summarizes the current state of knowledge of mannitol as an excipient in lyophilized injectable small and large molecule formulations. When compared with glycine, the physicochemical properties of mannitol make it a desirable and preferred bulking agent. Though mannitol is a popular bulking agent in freeze-dried formulations, its use may pose certain challenges such as vial breakage or its existence as a metastable crystalline hemihydrate in the final cake, necessitating appropriate mitigation strategies. The understanding of the phase behavior of mannitol in aqueous systems, during the various stages of freeze-drying, can be critical for the optimization of freeze-drying cycle parameters in multi-component formulations. Finally, using a decision tree as a guiding tool, we demonstrate the use of orthogonal techniques for attaining a stable and cost-effective lyophilized drug product containing mannitol.

Development of a multiparticulate drug delivery system for in situ amorphisation.

In the current study, the concept of multiparticulate drug delivery systems (MDDS) was applied to tablets intended for the amorphisation of supersaturated granular ASDs in situ, i.e. amorphisation within the final dosage form by microwave irradiation. The MDDS concept was hypothesised to ensure geometric and structural stability of the dosage form and to improve the in vitro disintegration and dissolution characteristics. Granules were prepared in two sizes (small and large) containing the crystalline drug celecoxib (CCX) and polyvinylpyrrolidone/vinyl acetate copolymer (PVP/VA) at a 50 % w/w drug load as well as sodium dihydrogen phosphate monohydrate as the microwave absorbing excipient. The granules were subsequently embedded in an extra-granular tablet phase composed of either the filler microcrystalline cellulose (MCC) or mannitol (MAN), as well as the disintegrant crospovidone and the lubricant magnesium stearate. The tensile strength and disintegration time were investigated prior to and after 10 min of microwave irradiation (800 and 1000 W) and the formed ASDs were characterised by X-ray powder diffraction and modulated differential scanning calorimetry. Additionally, the internal structure was elucidated by X-ray micro-Computed Tomography (XµCT) and, finally, the dissolution performance of selected tablets was investigated. The MDDS tablets displayed no geometrical changes after microwave irradiation, however, the tensile strength and disintegration time generally increased. Complete amorphisation of CCX was achieved only for the MCC-based tablets at a power input of 1000 W, while MAN-based tablets displayed partial amorphisation independent of power input. The complete amorphisation of CCX was associated with the fusion of individual ASD granules within the tablets, which negatively impacted the subsequent disintegration and dissolution performance. For these tablets, supersaturation was only observed after 60 min. On the other hand, the partially amorphised MDDS tablets displayed complete disintegration during the dissolution experiments, resulting in a fast onset of supersaturation within 5 min and an approx. 3.5-fold degree of supersaturation within the experimental timeframe (3 h). Overall, the MDDS concept was shown to potentially be a feasible dosage form for in situ amorphisation, however, there is still room for improvement to obtain a both fully amorphous and disintegrating system.

Evaluation of Time Consolidation Effect of Pharmaceutical Powders.

PURPOSE: We aim to perform a systematic study of the time consolidation effect, i.e. the reduction of powder flowability resulting from at-rest storage, on a diverse array of pharmaceutical powders under different stress, humidity, and length of time. METHODS: A ring shear cell-based methodology was employed. An instantaneous flow function was obtained, followed immediately by at-rest consolidation at precisely controlled humidity, stress, and duration. The consolidated powder was then subjected to shear-cell measurement. The difference in flowability between the immediate and consolidated specimens were attributed to the time consolidation effect. RESULTS: Among the six excipients tested, three exhibited time consolidation at varying extents. Citric acid and starch underwent time consolidation only at high relative humidity (RH = 75%), promoted by vapor condensation and liquid bridge formation. For both materials, the flowability decreased with time, and the extent of time consolidation was not sensitive to the stress applied (0.4-2 kPa). Importantly, mannitol was found to time consolidate under both 50% and 75% RH. Given time, mannitol formed cake, giving rise to flow function below unity. Inverse gas chromatography analysis indicated that mannitol possesses high total surface energy among known pharmaceutical powders. CONCLUSION: While time consolidation is prevalent among pharmaceutical powders, most can be mitigated by controlling the RH to below 75%. Notably, for materials possessing high surface energy, such as mannitol, time consolidation could occur at ambient humidity. Therefore, it is desirable to consider in-depth time consolidation evaluation for high surface energy powders, e.g. those subjected to milling or of amorphous nature.

Liquid-liquid transition kinetics in D-mannitol.

The kinetics of the first order liquid-liquid transition (LLT) in a single-component liquid D-mannitol have been examined in detail by the high rate of flash differential scanning calorimetry measurements. By controlling the annealing temperature, the phase X formation from the supercooled liquid is distinguished by either a nucleation-growth or a spinodal-decomposition type of LLT. In the measured time-temperature-transformation curve the portion covering the nucleation-growth type of LLT can be well fitted with a classical nucleation theory analysis.