RESUMEN
In recent years, solid dosage forms have gained interest in pediatric therapy because they can provide valuable benefits in terms of dose accuracy and stability. Particularly for orodispersible films (ODFs), the literature evidences increased acceptability and dose flexibility. Among the various available technologies for obtaining ODFs, such as solvent casting, hot-melt extrusion, and ink printing technologies, the solvent-free preparation methods exhibit significant advantages. This study investigated Vacuum Compression Molding (VCM) as a solvent-free manufacturing method for the preparation of flexible-dose pediatric orodispersible films. The experimental approach focused on selecting the appropriate plasticizer and ratios of the active pharmaceutical ingredient, diclofenac sodium, followed by the study of their impacts on the mechanical properties, disintegration time, and drug release profile of the ODFs. Additional investigations were performed to obtain insights regarding the solid-state properties. The ODFs obtained by VCM displayed adequate quality in terms of their critical characteristics. Therefore, this proof-of-concept study shows how VCM could be utilized as a standalone method for the production of small-scale ODFs, enabling the customization of doses to meet the individual needs of pediatric patients.
RESUMEN
The phenols from grape pomace have remarkable beneficial effects on health prevention due to their biological activity, but these are often limited by their bioaccessibility in the gastrointestinal tract. Encapsulation could protect the phenolics during digestion and influence the controlled release in such an intestine where their potential absorption occurs. The influence of freeze-drying encapsulation with sodium alginate (SA) and its combination with gum Arabic (SA-GA) and gelatin (SA-GEL) on the encapsulation efficiency (EE) of phenol-rich grape pomace extract and the bioaccessibility index (BI) of phenolics during simulated digestion in vitro was investigated. The addition of a second coating to SA improved the EE, and the highest EE was obtained with SA-GEL (97.02-98.30%). The release of phenolics followed Fick's law of diffusion and the Korsmeyer-Peppas model best fitted the experimental data. The highest BI was found for the total phenolics (66.2-123.2%) and individual phenolics (epicatechin gallate 958.9%, gallocatechin gallate 987.3%) using the SA-GEL coating were used. This study shows that freeze-dried encapsulated extracts have the potential to be used for the preparation of various formulations containing natural phenolic compounds with the aim of increasing their bioaccessibility compared to formulations containing non-encapsulated extracts.
RESUMEN
Most infectious diseases of the gastrointestinal tract can easily be treated by exploiting the already available antibiotics with the change in administration approach and delivery system. Ciprofloxacin (CIP) is used as a drug of choice for many bacterial infections; however, long-term therapy and off-site drug accumulation lead to an increased risk of tendinitis and peripheral neuropathy. To overcome this issue, nanotechnology is being exploited to encapsulate antibiotics within polymeric structures, which not only facilitates dose maintenance at the infection site but also limits off-site side effects. Here, sodium alginate (SA) and thiol-anchored chitosan (TC) were used to encapsulate CIP via a calcium chloride (CaCl2) cross-linker. For this purpose, the B-390 encapsulator was employed in the preparation of nanobeads using a simple technique. The hydrogel-like sample was then freeze-dried, using trehalose or mannitol as a lyoprotectant, to obtain a fine dry powder. Design of Experiment (DoE) was utilized to optimize the nanobead production, in which the influence of different independent variables was studied for their outcome on the polydispersity index (PDI), particle size, zeta potential, and percentage encapsulation efficiency (% EE). In vitro dissolution studies were performed in simulated saliva fluid, simulated gastric fluid, and simulated intestinal fluid. Antibacterial and anti-inflammatory studies were also performed along with cytotoxicity profiling. By and large, the study presented positive outcomes, proving the advantage of using nanotechnology in fabricating new delivery approaches using already available antibiotics.
RESUMEN
Lidocaine is generally recognized and preferred for local anaesthesia, but in addition, studies have described additional benefits of lidocaine in cancer therapy, inflammation reduction, and wound healing. These properties contribute to its increasing importance in dermatological applications, and not only in pain relief but also in other potential therapeutic outcomes. Therefore, the purpose of our study was to enhance lidocaine delivery through the skin. A stable nanostructured lipid carrier (NLC), as a passive permeation enhancer, was developed using a 23 full factorial design. The nanosystems were characterized by crystallinity behaviour, particle size, zeta potential, encapsulation efficiency measurements, and one of them was selected for further investigation. Then, NLC gel was formulated for dermal application and compared to a traditional dermal ointment in terms of physicochemical (rheological behaviour) and biopharmaceutical (qualitative Franz diffusion and quantitative Raman investigations) properties. The study also examined the use of 3D printed solid microneedles as active permeation enhancers for these systems, offering a minimally invasive approach to enhance transdermal drug delivery. By actively facilitating drug permeation through the skin, microneedles can complement the passive transport achieved by NLCs, thereby providing an innovative and synergistic approach to improving lidocaine delivery.
Asunto(s)
Administración Cutánea , Anestésicos Locales , Lidocaína , Permeabilidad , Absorción Cutánea , Piel , Lidocaína/administración & dosificación , Lidocaína/farmacocinética , Lidocaína/química , Absorción Cutánea/efectos de los fármacos , Anestésicos Locales/administración & dosificación , Anestésicos Locales/farmacocinética , Anestésicos Locales/química , Animales , Piel/metabolismo , Lípidos/química , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos/métodos , Nanoestructuras/química , Nanoestructuras/administración & dosificación , Porcinos , Agujas , Tamaño de la Partícula , GelesRESUMEN
Both grape pomace and whey are waste products from the food industry that are rich in valuable ingredients. The utilization of these two by-products is becoming increasingly possible as consumer awareness of upcycling increases. The biological activities of grape pomace extract (GPE) are diverse and depend on its bioavailability, which is influenced by processes in the digestive system. In this work, goat whey protein (GW) was used as the primary coating to protect the phenolic compounds of GPE during the spray drying process. In addition, trehalose (T), sucrose (S), xylose (X), and maltodextrin (MD) were added to the goat whey proteins as co-coatings and protein stabilizers. All spray drying experiments resulted in microcapsules (MC) with a high encapsulation efficiency (77.6-95.5%) and yield (91.5-99.0%) and almost 100% recovery of phenolic compounds during the release test. For o-coumaric acid, the GW-coated microcapsules (MC) showed a bioavailability index of up to 731.23%. A semi-crystalline structure and hydrophilicity were characteristics of the MC coated with 10% T, S, X, or 5% MD. GW alone or in combination with T, S, MD, or X proved to be a promising carrier for polyphenols from grape pomace extract and ensured good bioavailability of these natural antioxidants.
RESUMEN
Resistance to antibiotics such as Ciprofloxacin (CIP) is becoming a critical issue and needs to be addressed globally. CIP is widely used because of manifold uses; however, the long-term therapy poses serious health risks including FDA black box warnings such as tendinitis and peripheral neuropathy. Therefore, nanotechnology-based products can be an effective measure to improve therapeutic outcomes by maintaining the dose at the target site while reducing the dose-dependent toxicity. Biodegradable and biocompatible polymers, Chitosan (CS) and Hyaluronic acid (HA) were used in this work due to their diverse biological characteristics. A simple yet economical ionic gelation method was employed to synthesize nanoparticles with a plexus-like network; nanoplexes, followed by spray-drying to obtain the dry powders to improve stability. Quality by Design (QbD) approach was utilized during the study for robustness and standardization followed by Design of Experiment (DoE) for optimization in a holistic way. The mean particle size of the optimized powder sample was found to be 301.1 nm with a percentage encapsulation efficiency (% EE) of 78.8%. In-vitro dissolution studies corroborated the controlled release of CIP over 48 h. Also, mathematical kinetic modeling was applied to obtain thorough insight into the mechanism of drug release. Moreover, minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were presented to be lower in the case of prepared dry powder as compared to CIP, stating that nanotechnology can improve antimicrobial activity.
Asunto(s)
Antibacterianos , Quitosano , Ciprofloxacina , Portadores de Fármacos , Ácido Hialurónico , Nanopartículas , Tamaño de la Partícula , Polvos , Ciprofloxacina/química , Ciprofloxacina/administración & dosificación , Ciprofloxacina/farmacología , Polvos/química , Nanopartículas/química , Antibacterianos/administración & dosificación , Antibacterianos/química , Antibacterianos/farmacología , Portadores de Fármacos/química , Quitosano/química , Ácido Hialurónico/química , Liberación de Fármacos , Polímeros/química , Composición de Medicamentos/métodos , Pruebas de Sensibilidad MicrobianaRESUMEN
Non-steroidal anti-inflammatory piroxicam (PRX) is a poorly water-soluble drug that provides relief in different arthritides. Reducing the particle size of PRX increases its bioavailability. For pediatric, geriatric, and dysphagic patients, oral dispersible systems ease administration. Moreover, fast disintegration followed by drug release and absorption through the oral mucosa can induce rapid systemic effects. We aimed to produce an orodispersible lyophilizate (OL) consisting of nanosized PRX. PRX was solved in ethyl acetate and then sonicated into a poloxamer-188 solution to perform spray-ultrasound-assisted solvent diffusion-based nanoprecipitation. The solid form was formulated via freeze drying in blister sockets. Mannitol and sodium alginate were applied as excipients. Dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA) were used to determine the particle size. The morphology was characterized by scanning electron microscopy (SEM). To establish the crystallinity, X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) were used. A disintegration and in vitro dissolution test were performed. DLS and NTA presented a nanosized PRX diameter. The SEM pictures showed a porous structure. PRX became amorphous according to the XRPD and DSC curves. The disintegration time was less than 1 min and the dissolution profile improved. The final product was an innovative anti-inflammatory drug delivery system.
RESUMEN
Chitosan, being a biocompatible and mucoadhesive polysaccharide, is one of the most preferred hydrogel-forming materials for drug delivery. The objectives of the present study are to obtain spray-dried microparticles based on low-molecular-weight chitosan and study their potential application as cargo systems for the orally active drug benzydamine hydrochloride. Three types of particles are obtained: raw chitosan particles (at three different concentrations), cross-linked with sodium tripolyphosphate (NaTPP) particles (at three different chitosan:NaTPP ratios), and particles coated with mannitol (at three different chitosan:mannitol ratios), all of them in the size range between 1 and 10 µm. Based on the loading efficiency and the yields of the formulated hydrogel particles, one model of each type is chosen for further investigation of the effect of the cross-linker or the excipient on the properties of the gel structures. The morphology of both empty and benzydamine hydrochloride-loaded chitosan particles was examined by scanning electron microscopy, and it was quite regular and spherical. Interactions and composition in the samples are investigated by Fourier-transformed infrared spectroscopy. The thermal stability and phase state of the drug and drug-containing polymer matrixes were tested by differential scanning calorimetry and X-ray powdered diffraction, revealing that the drug underwent a phase transition. A drug release kinetics study of the chosen gel-based structures in simulated saliva buffer (pH = 6.8) and mathematical modeling of the process were performed, indicating the Weibull model as the most appropriate one.
RESUMEN
Pulmonary inflammations such as chronic obstructive pulmonary disease and cystic fibrosis are widespread and can be fatal, especially when they are characterized by abnormal mucus accumulation. Inhaled corticosteroids are commonly used for lung inflammations despite their considerable side effects. By utilizing particle engineering techniques, a combined dry powder inhaler (DPI) comprising nanosized ketoprofen-embedded mannitol-coated microparticles was developed. A nanoembedded microparticle system means a novel advance in pulmonary delivery by enhancing local pulmonary deposition while avoiding clearance mechanisms. Ketoprofen, a poorly water-soluble anti-inflammatory drug, was dispersed in the stabilizer solution and then homogenized by ultraturrax. Following this, a ketoprofen-containing nanosuspension was produced by wet-media milling. Furthermore, co-spray drying was conducted with L-leucine (dispersity enhancer) and mannitol (coating and mucuactive agent). Particle size, morphology, dissolution, permeation, viscosity, in vitro and in silico deposition, cytotoxicity, and anti-inflammatory effect were investigated. The particle size of the ketoprofen-containing nanosuspension was ~230 nm. SEM images of the spray-dried powder displayed wrinkled, coated, and nearly spherical particles with a final size of ~2 µm (nano-in-micro), which is optimal for pulmonary delivery. The mannitol-containing samples decreased the viscosity of 10% mucin solution. The results of the mass median aerodynamic diameter (2.4-4.5 µm), fine particle fraction (56-71%), permeation (five-fold enhancement), and dissolution (80% release in 5 min) confirmed that the system is ideal for local inhalation. All samples showed a significant anti-inflammatory effect and decreased IL-6 on the LPS-treated U937 cell line with low cytotoxicity. Hence, developing an innovative combined DPI comprising ketoprofen and mannitol by employing a nano-in-micro approach is a potential treatment for lung inflammations.
RESUMEN
Grape pomace is a byproduct of wineries and a sustainable source of bioactive phenolic compounds. Encapsulation of phenolics with a well-chosen coating may be a promising means of delivering them to the intestine, where they can then be absorbed and exert their health-promoting properties, including antioxidant, anti-inflammatory, anticancer, cardioprotective, and antimicrobial effects. Ionic gelation of grape pomace extract with natural coatings (sodium alginate and its combination with maltodextrins, gelatin, chitosan, gums Tragacanth and Arabic) was performed, and the resulting hydrogel microbeads were then air-, vacuum-, and freeze-dried to prevent spoilage. Freeze-drying showed advantages in preserving the geometrical parameters and morphology of the microbeads compared to other drying techniques. A good relationship was found between the physicochemical properties of the dried microbeads and the in vitro release of phenolics. Freeze-dried microbeads showed the highest cumulative release of phenols in the intestinal phase (23.65-43.27 mgGAE/gMB), while the most suitable release dynamics in vitro were observed for alginate-based microbeads in combination with gelatin, gum Arabic, and 1.5% (w/v) chitosan. The results highlight the importance of developing encapsulated formulations containing a natural source of bioactive compounds that can be used in various functional foods and pharmaceutical products.
RESUMEN
Bovine serum albumin (BSA) has been used extensively as a suitable carrier system for alternative drug delivery routes, such as nasal administration. However, the optimization of BSA nanoparticles with respect to their nasal applicability has not been widely studied. The present study focuses on the characterization of BSA nanoparticles prepared using the desolvation method, followed by a gelation process to facilitate intranasal drug delivery. The results demonstrated that the ratio of BSA and the desolvating agent, ethanol, played a critical role in the nanoparticle characteristics of the BSA nanogel matrices (BSA-NGs). Based on the gelling properties, the formulations of BSA-NG 2, BSA-NG 4, and BSA-NG 6 were selected for further investigation. The Raman spectra confirmed that there were no specific changes to the secondary structures of the BSA. The mucoadhesion studies revealed moderately high mucoadhesive properties, with a mucin binding efficiency (MBE) value of around 67%, allowing the dose to avoid elimination due to rapid mucociliary clearance of the nasal passage. Via studying the nexus of the carrier system, BSA-NGs loaded with dexamethasone as a model drug were prepared and evaluated by differential scanning calorimetry (DSC) and thermal gravimetry (TG), ascertaining that no ethanol remained in the samples after the freeze-drying process. Furthermore, the viscosity measurements exhibited moderate viscosity, which is suitable for nasal liquid preparations. The in vitro release studies performed with a simulated nasal electrolyte solution (SNES) medium showed 88.15-95.47% drug release within 4 h. In conclusion, BSA nanoparticle gelling matrices can offer potential, value-added drug delivery carriers for improved nasal drug administration.
RESUMEN
The development of an inhalation powder (IP) for cancer therapy is desired to improve the therapeutic response and patient compliance. The latest studies highlighted that statins, a class of drugs used in hypercholesterolemia, can have anticancer and antiinflammatory properties. Therefore, the aim of the study was to develop an IP containing liposomes loaded with simvastatin using spray drying technology, as well as to investigate the influence of formulation factors on the quality attributes of the IP by means of experimental design. Results highlighted that the composition of liposomes, namely type of phospholipid and cholesterol concentration, highly influences the quality attributes of IP, and the use of optimal concentrations of excipients, i.e. D-mannitol and L-leucine, is essential to preserve the characteristics of liposomes throughout the spray drying process. The in vitro characterization of the optimal IP formulation revealed that the total percentage of released drug is higher from the IP formulation compared to the powder of active substance (53.38 vs. 42.76%) over a period of six hours, and 39.67% of dry particles have a size less than 5 µm, making them suitable for inhalation. As a conclusion, spray drying technology can be effectively used in the development and preparation of IP containing liposomes.
RESUMEN
Cyclodextrins (CD) are used extensively in the pharmaceutical industry to improve the water solubility and bioavailability of drugs. Preparing ternary systems by applying a third component can enhance these beneficial effects. The complexation methods of these ternary systems are the same as those of two-component complexes. These methods are solvent (co-evaporation, co-precipitation, etc.) or solventless "green" techniques (co-grinding, microwave irradiation, etc.). Using solvent-free methods is considered to be an economically and environmentally desirable technology. This study aimed to prepare ternary systems by the co-grinding method and evaluate the effect of a third component by comparing it to products obtained by solvent methods, binary systems, and marketed products. For that, we used terbinafine hydrochloride as a model drug, sulfobutyl-ether-beta-cyclodextrin as a complexation agent and 5 or 15 w/w% of polyvinylpyrrolidone K-90 (PVP) or hydroxypropyl methylcellulose (HPMC) as auxiliary components. Physicochemical evaluation (X-Ray Diffractometry, Differential Scanning Calorimetry, Thermogravimetry) showed that new solid phases were formed, while Scanning Electron Microscopy was performed to study morphological aspects of the products. Fourier transform infrared spectroscopic measurements suggested different intermolecular interactions depending on the type of polymer. In vitro dissolution studies showed beneficial effects of CD and further improvement with the applied polymers. Products showed less cell toxicity with one exception. Both polymers enhanced the physicochemical and in vitro properties, suggesting a greater bioavailability of the model drug. However, the percentage of polymers applied did not appear to be an influencing factor for these properties.
RESUMEN
The aim of this study was to develop, for the first time, anthocyanin-enriched fractions from black raspberry pomace (BRP) using ultrasound-assisted extraction (UAE) via sonotrode and the Particles from Gas-Saturated Solutions (PGSS) process. UAEs with different amplitudes and sonication times were evaluated and showed relevant effects on the yields of target analytes. The raspberry pomace extracts were formulated in a powder form by PGSS using glyceryl monostearate as a carrier at different extract-to-carrier ratios of 1:11, 1:5, and 1:3. The effects of all variables were evaluated in terms of extraction yield, total phenolic content, and encapsulation yield. UAE was strongly affected by amplitude, and the highest amplitude (100%) provided the best results for extraction yield and total phenolics. HPLC of UAE extracts and powders was utilized for quantification of polyphenol compounds, showing cyanidin-3-rutinoside as a main compound, followed by cyanidin-3-glucoside, rutin, ellagic acid, and gallic acid. These results show that these time-efficient and high-performance techniques enable the production of natural fractions from industrial BRP with acceptable characteristics to be used for the development of nutraceuticals and different food formulations.
RESUMEN
In this present formulation study, vinpocetine-loaded nano-spray-dried polymeric micelles were developed via nano-spray-drying. Three different mucoadhesive excipients were applied in the studies, namely chitosan, hyaluronic acid and hydroxypropyl methylcellulose. In all cases, the formulations had a proper particle size and drug content after drying with spherical morphology and amorphous structure. After rapid dissolution in water, the polymeric micelles had a particle size around 100-130 nm, in monodisperse size distribution. The high encapsulation efficiency (>80%) and high solubilization (approx. 300-fold increase in thermodynamic solubility) contributed to rapid drug release (>80% in the first 15 min) and fast passive diffusion at simulated nasal conditions. The formulated prototype preparations fulfilled the demands of a low-viscosity, moderately mucoadhesive nasal drug delivery system, which may be capable of increasing the overall bioavailability of drugs administered via the auspicious nasal drug delivery route.
RESUMEN
Pulmonary drug transport has numerous benefits. Large surface areas for absorption and limited drug degradation of the gastrointestinal system are provided through the respiratory tract. The administration is painless and easy for the patient. Due to their better stability when compared to liquid formulations, powders have gained popularity among pulmonary formulations. In the pharmaceutical sector, quality assurance and product stability have drawn a lot of attention. Due to this, it was decided to perform a long-term stability study on a previously developed, nanosized dry powder inhaler (DPI) formulation that contained meloxicam. Wet milling was implemented to reduce the particle size, and nano spray-drying was used to produce the extra-fine inhalable particles. The particle diameter was determined using dynamic light scattering and laser diffraction. Scanning electron microscopy was utilized to describe the morphology. X-ray powder diffraction and differential scanning calorimetry were applied to determine the crystallinity. In an artificial lung medium, the in vitro dissolution was studied. The Andersen Cascade Impactor was used to investigate the in vitro aerodynamic characteristics. The stability test results demonstrated that the DPI formulation maintained its essential qualities after 6 and 12 months of storage. Consequently, the product might be promising for further studies and development.
RESUMEN
Grape pomace is a by-product of winemaking characterized by a rich chemical composition from which phenolics stand out. Phenolics are health-promoting agents, and their beneficial effects depend on their bioaccessibility, which is influenced by gastrointestinal digestion. The effect of encapsulating phenol-rich grape pomace extract (PRE) with sodium alginate (SA), a mixture of SA with gelatin (SA-GEL), and SA with chitosan (SA-CHIT) on the bioaccessibility index (BI) of phenolics during simulated digestion in vitro was studied. A total of 27 individual phenolic compounds (IPCs) were quantified by UHPLC. The addition of a second coating to SA improved the encapsulation efficiency (EE), and the highest EE was obtained for SA-CHIT microbeads (56.25%). Encapsulation affected the physicochemical properties (size, shape and texture, morphology, crystallinity) of the produced microbeads, which influenced the delivery of phenolics to the intestine and their BI. Thus, SA-GEL microbeads had the largest size parameters, as confirmed by scanning electron microscopy (SEM), and the highest BI for total phenolic compounds and IPCs (gallic acid, 3,4-dihydroxybenzoic acid and o-coumaric acid, epicatechin, and gallocatechin gallate) ranged from 96.20 to 1011.3%. The results suggest that encapsulated PRE has great potential to be used as a functional ingredient in products for oral administration.
Asunto(s)
Fenoles , Extractos Vegetales , Vitis , Alginatos/química , Disponibilidad Biológica , Cápsulas , Cromatografía Líquida de Alta Presión , Digestión , Gelatina/química , Microscopía Electrónica de Rastreo , Microesferas , Tamaño de la Partícula , Fenoles/química , Fenoles/farmacocinética , Extractos Vegetales/química , Extractos Vegetales/farmacocinética , Vitis/química , Técnicas In VitroRESUMEN
The increasing prevalence of water insoluble or poorly soluble drugs calls for the development of new formulation methods. Common approaches include the reduction of particle size and degree of crystallinity. Pulsed laser ablation is a clean technique for producing sub-micrometre sized drug particles and has the potential to induce amorphization. We studied the effect of femtosecond pulsed laser ablation (ELI ALPS THz pump laser system: λc = 781 nm, τ = 135 fs) on meloxicam in distilled water and in air. The ablated particles were characterized chemically, morphologically and in terms of crystallinity. We demonstrated that femtosecond laser ablation can induce partial amorphization of the particles in addition to a reduction in particle size. In the case of femtosecond pulsed laser ablation in air, the formation of pure meloxicam spheres showed that this technique can produce amorphous meloxicam without the use of excipients, which is a unique result. We also aimed to describe the ablation processes in both investigated media.
Asunto(s)
Terapia por Láser , Rayos Láser , Meloxicam , Terapia por Láser/métodos , Excipientes , AguaRESUMEN
This work involves the synthesis and subsequent development of a number of novel organocatalysts generated from ß-amino acids bearing diendo and diexo norbornene skeletons to improve their catalytic characteristics. The aldol reaction between isatin and acetone selected as the model reaction, was used to test and study enantioselectivities. The potential impact on enantioselectivity control regarding enantiomeric excess (ee%) was probed by varying the reaction parameters, such as additive, solvent, catalyst loading, temperature and substrate range. The corresponding 3-hydroxy-3-alkyl-2-oxindole derivetives were produced by organocatalyst 7 with good enantioselectivity up to 57% ee in the presence of LiOH. Substrate screening was used to investigate a number of substituted isatins with excellent findings up to 99% ee. Another aspect of this effort involved employing high-speed ball mill apparatus to conduct a mechanochemical study to make this model reaction more environmentally benign and sustainable.
RESUMEN
Pulmonary delivery is an alternative route of administration with numerous advantages over conventional routes of administration. It provides low enzymatic exposure, fewer systemic side effects, no first-pass metabolism, and concentrated drug amounts at the site of the disease, making it an ideal route for the treatment of pulmonary diseases. Owing to the thin alveolar-capillary barrier, and large surface area that facilitates rapid absorption to the bloodstream in the lung, systemic delivery can be achieved as well. Administration of multiple drugs at one time became urgent to control chronic pulmonary diseases such as asthma and COPD, thus, development of drug combinations was proposed. Administration of medications with variable dosages from different inhalers leads to overburdening the patient and may cause low therapeutic intervention. Therefore, products that contain combined drugs to be delivered via a single inhaler have been developed to improve patient compliance, reduce different dose regimens, achieve higher disease control, and boost therapeutic effectiveness in some cases. This comprehensive review aimed to highlight the growth of drug combinations by inhalation over time, obstacles and challenges, and the possible progress to broaden the current options or to cover new indications in the future. Moreover, various pharmaceutical technologies in terms of formulation and device in correlation with inhaled combinations were discussed in this review. Hence, inhaled combination therapy is driven by the need to maintain and improve the quality of life for patients with chronic respiratory diseases; promoting drug combinations by inhalation to a higher level is a necessity.