The Reproductive Capacities of the Calanoid Copepods Parvocalanus crassirostis and Acartia pacifica under Different pH and Temperature Conditions.

The increasing atmospheric CO2 concentrations and warming of marine waters have encouraged experiments on multi-stressor interactions in marine organisms. We conducted a multigenerational experiment to assess reproductive capacities regarding egg production in calanoid copepods Parvocalanus crassirostis and Acartia pacifica under different pH and temperature conditions. The experimental set-up allowed assessing the tandem effect of warming and acidification on the number of eggs produced by healthy copepod pairs under two pH conditions of 8.20 and 7.50 (hard selection) as well as with a gradual reduction of 0.05 pH units at each generation (soft selection). The results are quite interesting, with very diverse performance across temperatures. The number of eggs produced under hard selection was higher at pH 8.20 compared to pH 7.50 for both species, with the maximum number of eggs produced at 24-28 °C, whereas under soft selection, there was no significant difference in the egg production rate at 24-28 °C across generations and there was an improvement in the number of eggs produced at 8-16 °C. The results provide evidence that in a future ocean scenario of lower pH and higher temperature, the two species, and possibly the copepod population at large, might not decrease. Copepod populations might be resilient, and the transcriptomic evidence of adaptation to increased temperature and lower pH is a ray of hope. We believe further studies are needed to provide more robust datasets to underpin the hypothesis of adaptation to climate change.

Antibiotic Resistance Genes in Aerosols: Baseline from Kuwait.

Antimicrobial resistance (AMR) is one of the biggest threats to human health worldwide. The World Health Organization (WHO, Geneva, Switzerland) has launched the "One-Health" approach, which encourages assessment of antibiotic-resistant genes (ARGs) within environments shared by human-animals-plants-microbes to constrain and alleviate the development of AMR. Aerosols as a medium to disseminate ARGs, have received minimal attention. In the present study, we investigated the distribution and abundance of ARGs in indoor and outdoor aerosols collected from an urban location in Kuwait and the interior of three hospitals. The high throughput quantitative polymerase chain reaction (HT-qPCR) approach was used for this purpose. The results demonstrate the presence of aminoglycoside, beta-lactam, fluoroquinolone, tetracycline, macrolide-lincosamide-streptogramin B (MLSB), multidrug-resistant (MDR) and vancomycin-resistant genes in the aerosols. The most dominant drug class was beta-lactam and the genes were IMP-2-group (0.85), Per-2 group (0.65), OXA-54 (0.57), QnrS (0.50) and OXA-55 (0.55) in the urban non-clinical settings. The indoor aerosols possessed a richer diversity (Observed, Chao1, Shannon's and Pielou's evenness) of ARGs compared to the outdoors. Seasonal variations (autumn vs. winter) in relative abundances and types of ARGs were also recorded (R2 of 0.132 at p < 0.08). The presence of ARGs was found in both the inhalable (2.1 µm, 1.1 µm, 0.7 µm and < 0.3 µm) and respirable (>9.0 µm, 5.8 µm, 4.7 µm and 3.3 µm) size fractions within hospital aerosols. All the ARGs are of pathogenic bacterial origin and are hosted by pathogenic forms. The findings present baseline data and underpin the need for detailed investigations looking at aerosol as a vehicle for ARG dissemination among human and non-human terrestrial biota.

Bacterial and fungal communities in indoor aerosols from two Kuwaiti hospitals.

The airborne transmission of COVID-19 has drawn immense attention to bioaerosols. The topic is highly relevant in the indoor hospital environment where vulnerable patients are treated and healthcare workers are exposed to various pathogenic and non-pathogenic microbes. Knowledge of the microbial communities in such settings will enable precautionary measures to prevent any hospital-mediated outbreak and better assess occupational exposure of the healthcare workers. This study presents a baseline of the bacterial and fungal population of two major hospitals in Kuwait dealing with COVID patients, and in a non-hospital setting through targeted amplicon sequencing. The predominant bacteria of bioaerosols were Variovorax (9.44%), Parvibaculum (8.27%), Pseudonocardia (8.04%), Taonella (5.74%), Arthrospira (4.58%), Comamonas (3.84%), Methylibium (3.13%), Sphingobium (4.46%), Zoogloea (2.20%), and Sphingopyxis (2.56%). ESKAPEE pathogens, such as Pseudomonas, Acinetobacter, Staphylococcus, Enterococcus, and Escherichia, were also found in lower abundances. The fungi were represented by Wilcoxinia rehmii (64.38%), Aspergillus ruber (9.11%), Penicillium desertorum (3.89%), Leptobacillium leptobactrum (3.20%), Humicola grisea (2.99%), Ganoderma sichuanense (1.42%), Malassezia restricta (0.74%), Heterophoma sylvatica (0.49%), Fusarium proliferatum (0.46%), and Saccharomyces cerevisiae (0.23%). Some common and unique operational taxonomic units (OTUs) of bacteria and fungi were also recorded at each site; this inter-site variability shows that exhaled air can be a source of this variation. The alpha-diversity indices suggested variance in species richness and abundance in hospitals than in non-hospital sites. The community structure of bacteria varied spatially (ANOSIM r 2 = 0.181-0.243; p < 0.05) between the hospital and non-hospital sites, whereas fungi were more or less homogenous. Key taxa specific to the hospitals were Defluvicoccales, fungi, Ganodermataceae, Heterophoma, and H. sylvatica compared to Actinobacteria, Leptobacillium, L. leptobacillium, and Cordycipitaceae at the non-hospital site (LefSe, FDR q ≤ 0.05). The hospital/non-hospital MD index > 1 indicated shifts in the microbial communities of indoor air in hospitals. These findings highlight the need for regular surveillance of indoor hospital environments to prevent future outbreaks.

A Preliminary Assessment of Size-Fractionated Microplastics in Indoor Aerosol-Kuwait's Baseline.

The omnipresence of microplastic (MP) in various environmental samples, including aerosols, has raised public health concerns; however, there is presently very limited information on MPs in indoor aerosol. This paper presents a unique dataset where smaller MPs have been sampled using a six-stage cascade impactor from indoor environments in Kuwait. The MP concentration in the indoor air varied between 3.2 and 27.1 particles m-3, and the relative MP concentration decreased linearly from the lowest to the highest size fraction. A significant effect of location was observed for the total number of MPs (F2,14 = 5.80, p = 0.02) and the inhalable fraction (F2,14 = 8.38, p = 0.005), while location had no effect on the respirable fraction (F2,14 = 0.54, p = 0.60). A significant effect of the type of air conditioning used was also observed for the total number of MPs (F2,19 = 5.58, p = 0.01) and the inhalable fraction (F2,19 = 6.45, p = 0.008), while location had no effect on the respirable fraction (F2,19 = 1.30, p = 0.30). For the total number of MPs and the inhalable fraction, the concentration was significantly higher for the split unit air-conditioning as compared to the central air-conditioning plants. The presence/absence of carpets had no significant effect on the MP concentrations (total: F1,19 = 4.08, p = 0.06; inhalable: F1,19 = 3.03, p = 0.10; respirable: F1,19 = 4.27, p = 0.05). The shape was dominantly fibers, with few fragments in lower size fractions. These datasets represent the first baseline information for Kuwait, and the smaller MPs in all the samples further underscore the need to develop standardized protocols of MP collection in the ≤2.5 µm fraction that can have more conspicuous health implications.

Micro-Nano Plastic in the Aquatic Environment: Methodological Problems and Challenges.

Microplastic research has become a buzz word. It is seen as one of the most pressing issues of Anthropocene contamination. There is certainly no doubt about the ubiquitous presence of microplastic (MP) in almost all environmental matrices. However, the validity of considering them as a vector for contaminants needs some reconsideration, there are other more potent pathways. Their effect on marine biota also calls for some realistic experiments with environmental concentrations of MP and nanoplastic (NP). It has been observed that in most published literature, polymer characterization is performed. Is it necessary to do, or will merely finding and confirming the particle as plastic suffice for environmental research? Harmonization of protocols is necessary, and there is likely a need for some inter-laboratory comparison exercises in order to produce comparable data and reliable assessments across regions. Samples collected from the same area using different techniques show an order of magnitude difference in MP concentration. The issue of nanoplastic is more contentious; are we technologically ready to identify NP in environmental samples?

SARS-CoV-2 in hospital air as revealed by comprehensive respiratory viral panel sequencing.

BACKGROUND: Nosocomially acquired severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) infection has become the most significant pandemic of our lifetime. Though its transmission was essentially attributed to droplets from an infected person, with recent advancements in knowledge, aerosol transmission seems to be a viable pathway, as well. Because of the lower biological load in ambient aerosol, detection of SARS-CoV-2 is challenging. A few recent attempts of sampling large aerosol volumes and using next-generation sequencing (NGS) to detect the presence of SARS-CoV-2 in the air at very low levels gave positive results. These results suggest the potential of using this technique to detect the presence of SARS-CoV-2 and use it as an early warning signal for possible outbreak or recurrence of coronavirus disease 2019 (COVID-19). AIM: To assess efficacy of comprehensive respiratory viral panel (CRVP) sequencing and RT-PCR for low-level identification of SARS-CoV-2 and other respiratory viruses in indoor air. METHODS: A large volume of indoor aerosol samples from three major hospitals involved in COVID-19 care in Kuwait was collected. Viral RNA was isolated and subjected to comprehensive respiratory viral panel sequencing (CRVP) as per the standard protocol to detect the SARS-CoV-2 and other respiratory viruses in the hospital aerosol and monitor variations within the sequences. RT-PCR was also employed to estimate the viral load of SARS-CoV-2. FINDINGS: 13 of 15 (86.7%) samples exhibited SARS-CoV-2 with a relative abundance of 0.2-33.3%. The co-occurrence of human adenoviruses (type C1, C2, C5, C4), respiratory syncytial virus (RSV), influenza B, and non-SARS-CoV-229E were also recorded. Alignment of SARS-CoV-2 sequences against the reference strain of Wuhan China revealed variations in the form of single nucleotide polymorphisms (SNPs-17), insertions and deletions (indels-1). These variations were predicted to create missense (16), synonymous (15), frameshift (1) and stop-gained (1) mutations with a high (2), low (15), and moderate (16) impact. CONCLUSIONS: Our results suggest that using CRVP on a large volume aerosol sample was a valuable tool for detecting SARS-CoV-2 in indoor aerosols of health care settings. Owing to its higher sensitivity, it can be employed as a surveillance strategy in the post COVID times to act as an early warning system to possibly control future outbreaks.

Temporal trend of polychlorinated biphenyls contamination in the northwestern Arabian Gulf - Evidence from sediment records.

This study provides an insight into the polychlorinated biphenyls (PCBs) inventories in the sediments of the northwestern Arabian/Persian Gulf. PCBs can be used as chemical markers that correlate with historical events in the region, to estimate the sedimentation rates in the northern Gulf, and to determine the sources of pollutants in the study area. The concentrations of PCBs were generally patchy in sediments. At Station 1 the ΣPCB concentrations generally fluctuated between 0.100 and 0.400 ng g-1 dw throughout the depositional history measured in a sediment core. There were four peaks in the ΣPCB profile corresponding to 1969, 1979, 1983 and 1991. Station 2 showed a prominent peak at depth of 25 cm. The concentrations of the ΣPCBs and ΣICE congeners at this depth were 28 and 12 ng g-1 dw respectively. Concentrations then dropped dramatically thereafter by a factor of 4. The ΣPCB concentrations at Station 3 were very low compared to the concentrations measured at Stations 1 and 2. The PCB concentration in Core 4 which was taken from open waters was 2-3 orders of magnitude lower than those in the other coastal cores. However, a 1990-91 peak was omnipresent in these cores. There is no record of PCB production within the Gulf region, and PCB releases into the Kuwait marine environment are likely to originate from their use in products. These maxima in early-1990s can be correlated to inputs from war-related activities, including the reported destruction of PCB-containing transformers and military equipment during the occupation of Kuwait. None of the recent sediment core sections at the four stations had a ΣPCB concentration near the effects range-median (ERM) concentration of 180 ng g-1, or permissible exposure limits (PEL) of 189 ng g-1, or were above the effect range-low (ERL) values of 22.7 ng g-1.

Ocean Acidification-Mediated Food Chain Transfer of Polonium between Primary Producers and Consumers.

Phytoplankton and zooplankton are key marine components that play an important role in metal distribution through a food web transfer. An increased phytoplankton concentration as a result of ocean acidification and warming are well-established, along with the fact that phytoplankton biomagnify 210Po by 3−4 orders of magnitude compared to the seawater concentration. This experimental study is carried out to better understand the transfer of polonium between primary producers and consumers. The experimental produced data highlight the complex interaction between the polonium concentration in zooplankton food, i.e. phytoplankton, its excretion via defecated fecal pellets, and its bioaccumulation at ambient seawater pH and a lower pH of 7.7, typical of ocean acidification scenarios in the open ocean. The mass of copepods recovered was 11% less: 7.7 pH compared to 8.2. The effects of copepod species (n = 3), microalgae species (n = 3), pH (n = 2), and time (n = 4) on the polonium activity in the fecal pellets (expressed as % of the total activity introduced through feeding) was tested using an ANOVA 4. With the exception of time (model: F20, 215 = 176.84, p < 0.001; time: F3 = 1.76, p = 0.16), all tested parameters had an impact on the polonium activity (copepod species: F2 = 169.15, p < 0.0001; algae species: F2 = 10.21, p < 0.0001; pH: F1 = 9.85, p = 0.002) with complex interactions (copepod x algae: F2 = 19.48, p < 0.0001; copepod x pH: F2 = 10.54, p < 0.0001; algae x pH: F2 = 4.87, p = 0.009). The experimental data underpin the hypothesis that metal bioavailability and bioaccumulation will be enhanced in secondary consumers such as crustacean zooplankton due to ocean acidification.

Enhanced Polonium Concentrations in Aerosols from the Gulf Oil Producing Region and the Role of Microorganisms.

This study provides the first data set of 210Po and 210Pb activity concentrations in the organic and inorganic components of several particle size classes of aerosols collected at two sampling stations in Kuwait. The 210Po concentrations in the aerosols (Bq/g) were similar in all of the particle size classes, but as most (91%) of the aerosol load was made of fine fraction particles of PM0.39-2.5 µm, most of the 210Po activity was carried by this aerosol fraction. At the two sampling stations, the 210Po/210Pb activity concentration ratios in the aerosols were similar, stable around the year, and averaged 1.5 (range 1.2-1.9), much higher than the typical activity concentration ratios of these radionuclides in unmodified (background) aerosols, with Po/Pb < 0.1. The aerosol enrichment in 210Po was likely originated from the oil industry, specifically by gas flaring and oil refining in the Gulf region. Radionuclide analysis in the organic and inorganic components of aerosols showed that the 210Po concentration in the organic component was one order of magnitude higher than the 210Po concentration in the inorganic component, in contrast with 210Pb, which displayed similar concentrations in both organic and inorganic aerosol components. The 210Po carrying organic component of aerosols was investigated and it was found to be largely composed of microorganisms with high microbial and fungi diversity, with the phyla Proteobacteria, Ascomycota, and Basidiomycota being dominant among the bacteria and with Zygomycota being dominant among the fungi. Therefore, we are facing an active concentration process of the atmospheric 210Po carried out by microorganisms, which underlies the 210Po enrichment process in the organic component of aerosols. This bioconcentration of polonium in bioaerosols was unknown.

Depositional time trends of phosphorous accumulation in a dated sediment core from the northwestern Arabian Gulf: Can phosphorous be used to support 210Pb chronologies in coastal aquatic sediments?

The use of 210Pb dating for the reconstruction of contaminant profiles in undisturbed sediments is the most widely acceptable technique historically. Due to the uncertainties associated with the technique, dating of sediments have often been supported by ancillary evidence such as an alternative historical marker in the catchment that is preserved in the sedimentary records. The most widely used verification marker is 137Cs, which is attributed to global fallout from past nuclear weapons testing, and the Chernobyl accident. In the southern hemisphere, and the mid-latitudes, the 137Cs signal from Chernobyl fallout is often absent from the sedimentary records making it very difficult to verify the 210Pb chronologies in these natural archives. This study reports the spatial and temporal variability of total phosphorus (TP) and its forms in sediments from Kuwait Bay and provides evidence of the possibility of using Phosphorous as a potential marker to support dates derived from 210Pb dating. In the current study we report the spatial and temporal variations in the concentrations of Phosphorus from near-shore sediments from Kuwait. The mean (and range) of TP concentration in surficial sediments is 19.4 (12.2 to 24) µmol-P g-1 dry weight. The highest concentrations were measured in the deepest portions of the Bay which is characterized by fine grained sediments. The vertical profile of TP in the sediments was characterized by a gradual increase in concentration from lower layers to a subsurface maximum (at approximately 4-5 cm) followed by an exponential decrease to the sediment-water interface. The sedimentary TP profile correlated remarkably well with changes in the population of Kuwait over the last three decades, suggesting that wastewater inputs into the Bay from treatment plants are an important source of phosphorus in the coastal waters. The decrease in concentration in sediment deposited over the last five years of the core is explained by the commissioning of an improved wastewater treatment plant with higher phosphorus removal efficiency. These fluctuations preserved in the sedimentary records linked to identifiable historical events provides powerful evidence that this nutrient associated with wastewater inputs in coastal aquatic environments can be used as ancillary information to support 210Pb dating.

A review of microplastic distribution in sediment profiles.

The growing use of plastic and their indiscriminate disposal into the environment has resulted in the accumulation of huge quantities of microplastic (MP) in the marine environment. Several studies have investigated the pathways of MPs reaching marine environments and a few have begun looking at their inventories in sediment profiles. Recent estimates suggest between 70 and 90% of the MP particles are accumulated into sediment profiles. This paper reviews MPs in sediment cores, and the methods used for chronological reconstruction to provide evidence to link the plastic usage and MP inventories over time. In one example, a 210Pb dated sediment core from Kuwait Bay revealed 0.1 MPs g-1 of sediment deposited in approximately 1951 and 0.5 MPs g-1 in sediment from 2009 indicating a progressively increasing presence in recent sediments. The review also highlights the issue of very large spatio-temporal variation in MP concentrations, indicating the limitation of a snapshot study especially when dealing with the surface sediments; and it demonstrates the relevance of using sediment cores for a better assessment of MP input and inventories in the marine environment. It is proposed that MP sediment data should be reported as N m-2 year-1 or g m-2 year-1, and cores preferably dated using 210Pb, and supported by at least one other stratigraphic marker to enhance the usefulness of these datasets, since 210Pb can reliably date sediments as old as 100 years, a time-span which extends well beyond the time plastic production began. The anomalies in data processing and reporting in terms of number per kg of sediment or per cm2/m2 should be addressed essentially by adopting a standardized protocol.

An assessment of microplastic inputs into the aquatic environment from wastewater streams.

Wastewater treatment plants (WWTPs) play a pivotal role in removal of microplastics (MPs) particles before the waste streams are discharged into aquatic environments. Indiscriminate disposal of the effluent and untreated wastewater not only contribute to accumulation of MP in the marine environment, but they can also act as a carrier for various hydrophobic compounds and contributors of pollutants that leach from them via natural degradation. In this assessment, we have summarized the MP concentrations in influent and effluent streams, and provide quantification of the discharges from these WWTPs. Almost 50% of the global wastewater influent of 3,562,082 × 105 m3 remains untreated. Some conservative estimates indicate that treated effluent disposal can add around 1.47 × 1015 MPs annually, whereas the discharge of untreated effluent is likely to add a staggering 3.85 × 1016 MPs annually to the aquatic environments. The efficiency of MP removal in wastewater treatment plants varies between 88 and 99.9%, indicating the potential of capturing the majority of the MP from escaping into the freshwater and marine environment. Based on WWTP removal efficiencies for MPs, calculations suggest that if all the globally produced wastewater was treated prior to release, a reduction of over 90% of the current amount of MP inputs into the aquatic environment could be achieved. From the number of studies conducted and assessments made on MPs in waste streams, it is obvious the methodologies followed were quite different, and the use of acids and heating are likely to deteriorate the MPs, emphasizing the need to develop harmonized protocols for microplastic assessment in wastewater treatment plants.

210Po concentration in selected calanoid copepods in the northern Arabian Gulf.

Copepods are the most abundant metazoans, forming a vital food chain link between the primary producers the phytoplankton and fish. This study presents baseline information on the concentration of 210Po among calanoid copepods isolated from the Kuwait marine area. The concentration of 210Po in six species of copepod, including Subeucalanus flemingeri, Parvocalanus crassirostis, Acartia pacifica, Calanopia elliptica, Acrocalanus gibber, and Euterpina acutifrons were 151.3-158.8 Bq kg-1 wwt, 121.1-129.5 Bq kg-1 wwt, 51.23-54.91 Bq kg-1 wwt, 38.88-40.09 Bq kg-1 wwt, 38.07-38.29 Bq kg-1 wwt, and 33.46-36.50 Bq kg-1 wwt, respectively. The 210Po concentration in seawater shows a seasonal variation, with a higher concentration range of 0.58-0.70 mBq L-1 during summer and autumn, while a lower concentration is found (0.30-0.38 mBq L-1) during winter and spring. The concentration factor among the copepods varies between 8 ∗ 104 and 5 ∗ 105 that is an order of magnitude higher than the diatoms and dinoflagellates.

Concentrations of selected radionuclides and their spatial distribution in marine sediments from the northwestern Gulf, Kuwait.

This study focuses on creating a baseline for 40K, 210Pb, 137Cs, 90Sr, 226Ra, 228Ra, 238U, 235U, 234U, 239+240Pu and 238Pu in marine sediments in the northwestern Gulf. The respective measured concentration ranges were 386-489, 32.3-48.8, 1.5-2.9, 4.53-5.42, 18.3-23.1, 18.8-23.0, 22.3-30.5, 0.99-1.33, 25.6-34.8, 0.30-0.93, and 0.0008-0.00018Bqkg-1. The levels of these radionuclides are generally comparable to values reported for other marine waters in the northern hemisphere. The 137Cs activity in the Gulf sediments offshore Kuwait is an order of magnitude lower compared to sediments from northeastern Iran. Other than that finding, no hot spots were observed in sediments adjacent to power and desalination plants, oil and gas industrial activities or wastewater treatment facilities. These data will serve as a baseline to gauge possible future inputs of radionuclides in the northern Gulf. The calculated average ratio of 235U/238U activity in the area is in agreement with the reported figure of the natural uranium ratio, suggesting the absence of depleted uranium (DU) at all the stations. The low concentration of 239+240Pu suggests that there is no significant source of plutonium except that from atmospheric fallout from weapon testing and possible dry deposition via long-range dust transport.

Synthetic nanocomposite MgH2/5 wt. % TiMn2 powders for solid-hydrogen storage tank integrated with PEM fuel cell.

Storing hydrogen gas into cylinders under high pressure of 350 bar is not safe and still needs many intensive studies dedic ated for tank's manufacturing. Liquid hydrogen faces also severe practical difficulties due to its very low density, leading to larger fuel tanks three times larger than traditional gasoline tank. Moreover, converting hydrogen gas into liquid phase is not an economic process since it consumes high energy needed to cool down the gas temperature to -252.8 °C. One practical solution is storing hydrogen gas in metal lattice such as Mg powder and its nanocomposites in the form of MgH2. There are two major issues should be solved first. One related to MgH2 in which its inherent poor hydrogenation/dehydrogenation kinetics and high thermal stability must be improved. Secondly, related to providing a safe tank. Here we have succeeded to prepare a new binary system of MgH2/5 wt. % TiMn2 nanocomposite powder that show excellent hydrogenation/dehydrogenation behavior at relatively low temperature (250 °C) with long cycle-life-time (1400 h). Moreover, a simple hydrogen storage tank filled with our synthetic nanocomposite powders was designed and tested in electrical charging a battery of a cell phone device at 180 °C through a commercial fuel cell.

Naturally Occurring Radioactive Material (NORM) in seawater of the northern Arabian Gulf - Baseline measurements.

This study focuses on creating baseline for 238U, 235U, 234U, 210Pb, 210Po and 40K concentrations in the northern Arabian Gulf. The respective concentration ranges were 0.047-0.050, 0.00186-0.00198, 0.054-0.057, 0.00085-0.00092, 0.00051-0.00062 and 18.6-19.1Bql-1. These results suggest that the levels are generally comparable to other marine waters in the northern hemisphere. There were no hot spots observed from oil and gas industry. These data will serve as a baseline to gauge possible future inputs of TENORMs in the northern Gulf. A positive and linear correlation was observed between 238,234U, 40K isotopes and seawater salinity. The results also suggest significant fractionation between 210Po and 210Pb, attributed to rapid removal of 210Po by biota compared to 210Pb. The mean residence time for 210Po in the study area was 371days. The 234U/238U and 238U/235U activity ratios in seawater samples vary between 1.14-1.15, and 0.038-0.040. The 234U/238U and 235U/238U ratio is similar to the expected composition of seawater (1.148±0.002) and 0.0462.

Concentration of selected radionuclides in seawater from Kuwait.

No baseline existed for the radionuclides in Kuwait territorial water. With changing trend in the region to embrace nuclear energy, the baseline study is imperative to create a reference and to record the influence-functioning of upcoming power plants. The first one in Bushehr, Iran is ready to start and several more are likely to come-up in UAE, Saudi Arabia and Kuwait. The present baseline concentration of the four considered radionuclide's show low concentration of tritium, polonium, strontium and cesium; their concentration is comparable to most oceanic waters.