Clenching the Strings of Bruxism Etiopathogenesis: Association Analyses on Genetics and Environmental Risk Factors in a Deeply Characterized Italian Cohort.

Bruxism is a worldwide oral health problem. Although there is a consensus about its multifactorial nature, its precise etiopathogenetic mechanisms are unclear. This study, taking advantage of a deeply characterized cohort of 769 individuals (aged 6-89 years) coming from Northern Italy's genetically isolated populations, aims to epidemiologically describe environmental risk factors for bruxism development and identify genes potentially involved through a Genome-Wide Association Study (GWAS) approach. Logistic mixed models adjusted for age and sex were performed to evaluate associations between bruxism and possible risk factors, e.g., anxiety, smoking, and alcohol and caffeine intake. A case-control GWAS (135 cases, 523 controls), adjusted for age, sex, and anxiety, was conducted to identify new candidate genes. The GTEx data analysis was performed to evaluate the identified gene expression in human body tissues. Statistical analyses determined anxiety as a bruxism risk factor (OR = 2.54; 95% CI: 1.20-5.38; p-value = 0.015), and GWAS highlighted three novel genes potentially associated with bruxism: NLGN1 (topSNP = rs2046718; p-value = 2.63 × 10-7), RIMBP2 (topSNP = rs571497947; p-value = 4.68 × 10-7), and LHFP (topSNP = rs2324342; p-value = 7.47 × 10-6). The GTEx data analysis showed their expression in brain tissues. Overall, this work provided a deeper understanding of bruxism etiopathogenesis with the long-term perspective of developing personalized therapeutic approaches for improving affected individuals' quality of life.

The effect of carbodiimide on push-out bond strength of fiber posts and endogenous enzymatic activity.

BACKGROUND: To investigate the effect of 0.3 M 1-ethyl-3(3-dimethylaminopropyl) carbodiimide (EDC) aqueous solution pretreatment on push-out bond strength (PBS) and matrix-metalloproteinases (MMPs) activity within radicular dentin when different post cementation strategies were employed. METHODS: One hundred and twenty monoradicular human teeth were endodontically treated and randomly divided into six groups, depending on the cementation strategy and root dentin pretreatment (n = 20): EAR: cementation with an etch-and-rinse adhesive (LuxaBond Total Etch, DMG) and resin cement (LuxaCore Z Dual, DMG); EAR/EDC: 1 min EDC pretreatment after etching + EAR; SE: cementation with a self-etch primer (Multilink Primer, Ivoclar Vivadent) and corresponding cement (Multilink Automix, Ivoclar Vivadent); SE/EDC: self-etch primer + EDC pretreatment + SE; SA: cementation with a universal self-adhesive cement (RelyX Universal, 3 M); SA/EDC: EDC pretreatment + SA. Slices were submitted to PBS test and interfacial nanoleakage evaluation 24 h after cementation or after thermocycling (40.000 cycles, 5-55 °C). To investigate the effect of EDC on MMPs activity, 4 additional first maxillary premolars per group were processed for in situ zymography analysis. Multivariate ANOVA and post hoc Tukey tests were used to analyze PBS values. The data from in situ zymography were analyzed with Kruskal-Wallis test and Dunn's pairwise multiple comparison procedures (α = 0.05). RESULTS: The variables "EDC pretreatment", "root region" and "thermocycling" significantly influenced PBS (p < 0.05), while the variable "cementation strategy" had no influence (p > 0.05). Thermocycling significantly reduced PBS in SE and SA groups (p < 0.05). EDC was effective in preserving PBS after artificial aging. EDC pretreatment significantly reduced enzymatic activity at baseline in EAR and SE groups, and in SA group after thermocycling (p < 0.05). CONCLUSIONS: The use of EDC prevents the reduction of bond-strength values after artificial aging and silences endogenous enzymatic activity within radicular dentin when different cementation strategies were employed.

Odontostomatological Traits in North-Eastern Italy's Isolated Populations: An Epidemiological Cross-Sectional Study.

Malocclusions and temporomandibular disorders (TMDs) are oral health problems that are spread worldwide. To date, few studies focused on their prevalence and associated risk factors are available. This study aims to define the prevalence and distribution of odontostomatological traits and evaluate specific risk factors in isolated villages in north-eastern Italy, taking advantage of their environmental homogeneity. Nine hundred and forty-four participants aged six to eighty-nine years were enrolled. Thirty-one odontostomatological phenotypes, classified into five domains (airways, bad habits, extraoral and intraoral parameters, TMDs, and teeth), were evaluated. A descriptive statistical analysis was performed; mixed logistic models were used to test the relationships among the traits. According to the study's findings, Angle's class I was prevalent (65.3%) followed by class II malocclusion (24.3%); class III and reversed overjet were the least frequent malocclusions (10.4% and 1.8%, respectively). Temporomandibular joint (TMJ) click/noise was prevalent among TMDs (34.7%). The statistically significant (p-value < 0.05) risk factors were ankyloglossia for phonetic issues (OR 1.90) and bruxism for TMJ click/noise (OR 1.70) and pain (OR 2.20). Overall, this work provides a picture of the prevalence of malocclusions and TMDs in a large Italian sample and reveals risk factors to take into account in the development of preventive strategies and treatments.

Resin composite cements: Current status and a novel classification proposal.

OBJECTIVES: Currently, a classification of resin cements that includes relatively recently formulated ("universal") cements is lacking. Furthermore, the terminology used to define different resin cements in the scientific reports is inconsistent. Accordingly, this work aims to: (i) propose a novel classification of resin composite cements; (ii) disambiguate the term "universal cements" and (iii) present an overview of the properties of these cements. METHODS: An analysis of peer-reviewed literature (PubMed search), as well as market research on definitive resin composite cements were performed. RESULTS: A tendency toward simplified and versatile luting materials was observed both in the scientific literature and on the dental market with the advent of self-adhesive/one-step resin cements. However, additional priming procedures were necessary to improve their bonding performance in certain clinical situations. Hence, several cements that can be applied both in adhesive and self-adhesive mode were introduced. These cements are associated with a universal adhesive resin, that can be used as a tooth and/or restorative material primer, without the need for other priming systems, regardless of the substrate. These systems should be considered truly universal. Therefore, we hereby suggested a new classification of resin-based cements: (1) adhesive/multi-step; (2) self-adhesive/one-step; (3) universal cements (one- or multi-step). Despite promising in vitro results, clinical trials and long-track laboratory studies are necessary to confirm the reliability of the universal cements. CONCLUSIONS: This review presented the current advances in the field of resin-based cements, which are reflected in the proposed classification. The term "universal cement" was disambiguated, which will help standardize the terminology used in published research. CLINICAL SIGNIFICANCE: The classification of resin-based cements and a better understanding of the proper terminology will help standardize the terminology in published research, as well as improve the understanding of the clinical practitioners of the different indications and possible modalities of use of the available cements.

Revised FDI criteria for evaluating direct and indirect dental restorations-recommendations for its clinical use, interpretation, and reporting.

OBJECTIVES: The FDI criteria for the evaluation of direct and indirect dental restorations were first published in 2007 and updated in 2010. Meanwhile, their scientific use increased steadily, but several questions from users justified some clarification and improvement of the living document. MATERIALS AND METHODS: An expert panel (N = 10) initiated the revision and consensus process that included a kick-off workshop and multiple online meetings by using the Delphi method. During and after each round of discussion, all opinions were collected, and the aggregated summary was presented to the experts aiming to adjust the wording of the criteria as precisely as possible. Finally, the expert panel agreed on the revision. RESULTS: Some categories were redefined, ambiguities were cleared, and the descriptions of all scores were harmonized to cross-link different clinical situations with possible management strategies: reviewing/monitoring (score 1-4), refurbishment/reseal (score 3), repair (score 4), and replacement (score 5). Functional properties (domain F: fracture of material and retention, marginal adaptation, proximal contact, form and contour, occlusion and wear) were now placed at the beginning followed by biological (domain B: caries at restoration margin, hard tissue defects, postoperative hypersensitivity) and aesthetic characteristics (domain A: surface luster and texture, marginal staining, color match). CONCLUSION: The most frequently used eleven categories of the FDI criteria set were revised for better understanding and handling. CLINICAL RELEVANCE: The improved description and structuring of the criteria may help to standardize the evaluation of direct and indirect restorations and may enhance their acceptance by researchers, teachers, and dental practitioners.

Evaluation of direct restorations using the revised FDI criteria: results from a reliability study.

OBJECTIVES: The purpose of this in vitro reliability study was to determine the intra- and inter-examiner agreement of the revised FDI criteria including the categories "fracture of material and retention" (F1) and "caries at restoration margin" (B1). MATERIALS AND METHODS: Forty-nine photographs of direct tooth-coloured posterior (n = 25) and anterior (n = 24) restorations with common deficiencies were included. Ten dental experts repeated the assessment in three blinded rounds. Later, the experts re-evaluated together all photographs and agreed on a reference standard. Statistical analysis included the calculation of Cohen's (Cκ), Fleiss' (Fκ), and weighted Kappa (wκ), the development of a logistic regression with a backward elimination model and Bland/Altman plots. RESULTS: Intra- and inter-examiner reliability exhibited mostly moderate to substantial Cκ, Fκ, and wκ values for posterior restorations (e.g. Intra: F1 Cκ = 0.57, wκ = 0.74; B1 Cκ = 0.57, wκ = 0.73/Inter F1 Fκ = 0.32, wκ = 0.53; B1 Fκ = 0.41, wκ = 0.64) and anterior restorations (e.g. Intra F1 Cκ = 0.63, wκ = 0.76; B1 Cκ = 0.48, wκ = 0.68/Inter F1 Fκ = 0.42, wκ = 0.57; B1 Fκ = 0.40, wκ = 0.51). Logistic regression analyses revealed significant differences between the evaluation rounds, examiners, categories, and tooth type. Both the intra- and inter-examiner reliability increased along with the evaluation rounds. The overall agreement was higher for anterior restorations compared to posterior restorations. CONCLUSIONS: The overall reliability of the revised FDI criteria set was found to be moderate to substantial. CLINICAL RELEVANCE: If properly trained, the revised FDI criteria set are a valid tool to evaluate direct and indirect restorations in a standardized way. However, training and calibration are needed to ensure reliable application.

An Insight into Enamel Resin Infiltrants with Experimental Compositions.

Resin infiltration is a conservative treatment of initial enamel carious lesions. Only one infiltrant material is available on the market (Icon, DMG), and research is now investigating new chemical compositions so as to further exploit the benefits of the resin infiltration technique. A literature search of the articles testing the effects of different formulations on mechanical properties, resin penetration ability, remineralizing, and antibacterial activities was conducted. Of 238 articles, 29 resulted in being eligible for the literature review. The formulations investigated were all different and consisted in the inclusion of hydrophobic monomers (i.e., BisEMA, UDMA), solvents (ethanol, HEMA), alternative etchants (PAM) or molecules with antibacterial or bioactivity features (i.e., AgNP, YbF3, MTZ, chitosan, DMAMM, HAp, MC-IL, NACP, PUA, CHX) and microfilled resins. Information on the long-term performances of the tested experimental materials were scarce. The combination of TEGDMA with hydrophobic monomers and the inclusion of a solvent alternative to ethanol reinforced mechanical properties of the materials. Hybrid-glass materials demonstrated an enhanced remineralization capacity. Techniques such as tunnelization increased the penetration depth and preserved the recourse to less-conservative treatments. Combining the min-invasive infiltrant approach with remineralizing and bacteriostatic properties would be beneficial for therapeutic and economical aspects, according to the principles of minimally invasive dentistry.

A Resin Infiltration Technique for Molar Hypomineralization Treatment: A Preliminary Study in a Pediatric Population.

Purpose: The purpose of this study was to evaluate resin infiltration (RI) technique's effects on the in vivo functional treatment of molar hypomineralization (MH)-affected permanent first molars (PFMs). Methods: Fifteen MH-affected PFMs were resin-infiltrated and evaluated for a three-month follow-up (FU). In vivo resin replicas were used for profilometric and scanning electron microscope (SEM) analysis of PFM surfaces; any variation of clinical aspect and dentin hypersensitivity was registered as: T0 equals baseline; T1 equals right after treatment; T2 equals oneweek follow-up; and T3, T4, and T5 equal one-, two-, and three-month FU. Results: At T0, MH-affected surfaces were rougher and more irregular than sound ones; at T1, resin-infiltrated surfaces were smoother while a progressive increase of superficial roughness was observed over time. Hypersensitivity improved at T1 and remained stable over time in severe MH cases. Conclusions: Resin infiltration seems to be a promising treatment, especially in managing severe molar hypomineralization cases for the evaluated follow-up.

Dental Adhesives-Surface Modifications of Dentin Structure for Stable Bonding.

The latest advancements in dentin bonding have focused on strategies to impair degradation mechanisms in order to extend the longevity of bonded interfaces. Protease inhibitors can reduce collagen degradation within the hybrid layer (HL). Collagen cross-linkers allow better adhesive infiltration and also inhibit proteases activity. Particles added to adhesive can promote mineral precipitation within the HL, reducing nanoleakage and micropermeability, besides possible antimicrobial and enzymatic inhibition effects. Most of these approaches are still experimental, and aspects of the adhesive under the clinician's control are still determinant for the long-term stability of adhesive restorations.

Influence of Curing Time on the Microbiological Behavior of Bulk-Fill Nanohybrid Resin Composites.

This in vitro study aimed to evaluate the influence of curing time on surface characteristics and microbiological behavior of three bulk-fill resin-based composites (RBCs). Materials were light-cured for either 10 s or 80 s, then finished using a standard clinical procedure. They were characterized by surface morphology (SEM), surface elemental composition (EDS), surface roughness (SR), and surface free energy (SFE). Microbiological behavior was assessed as S. mutans adherence (2 h) and biofilm formation (24 h) using a continuous-flow bioreactor. Statistical analysis included a two-way ANOVA and Tukey's test (p < 0.05). Materials differed substantially as filler shape, dimension, elemental composition and resin matrix composition. Significant differences between materials were found for SR, SFE, and microbiological behavior. Such differences were less pronounced or disappeared after prolonged photocuring. The latter yielded significantly lower adherence and biofilm formation on all tested materials, similar to conventional RBCs. Improved photoinitiators and UDMA-based resin matrix composition may explain these results. No correlation between surface characteristics and microbiological behavior can explain the similar microbiological behavior of bulk-fill materials after prolonged photocuring. This different performance of bulk-fill materials compared with conventional RBCs, where surface characteristics, especially surface chemistry, influence microbiological behavior, may have important implications for secondary caries occurrence and restoration longevity.

Endogenous Enzymatic Activity of Primary and Permanent Dentine.

Matrix metalloproteinases (MMPs) play an important role in tooth development and influence caries development and hybrid layer degradation. Literature is scant on the differences in the activity of MMPs between primary and permanent dentine. Accordingly, the aim of the present study was to investigate endogenous gelatinolytic activity in primary and permanent dentine. Separate batches of dentine powder were obtained from intact human primary and permanent molars (n = 6). Each batch was divided in two subgroups: (1) mineralised; and (2) demineralised with 10% H3PO4. After protein extraction, gelatine zymography was performed. Furthermore, in situ zymography was performed on dentine sections of the same groups (n = 3). The slices were polished, covered with fluorescein-conjugated gelatine and evaluated using a confocal microscope. In situ zymography data were analysed using two-way analysis of variance and post hoc Holm-Sidák statistics (α = 0.05). Primary dentine showed poorly defined bands in the zymograms that vaguely corresponded to the pro-form and active form of MMP-2 and the pro-form of MMP-9. In permanent dentine, demineralised powder demonstrated stronger gelatinolytic activity than mineralised powder. In situ zymography identified stronger enzymatic activity in primary etched dentine (p < 0.05). Stronger enzymatic activity recorded in primary dentine may be related to the differences in morphology and composition between primary and permanent dentine.

Development of di-methacrylate quaternary ammonium monomers with antibacterial activity.

Nine antibacterial di-methacrylate monomers based on bis-quaternary ammonium salts (bis-QAMs) were synthesized and structurally characterized. The biological activity of the bis-QAMs was tested in terms of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) on different bacterial strains achieving promising results and, in most cases, a complete bactericidal effect using a bis-QAM concentration lower than 1 mg/mL. Two of the structures showed comparable and superior activity against S. mutans than the commercial monomer 12-methacryloyloxydodecyl pyridinium bromide (MDBP). All the bis-QAMs here described were able to inhibit S. mutans biofilm formation at a concentration equal to the MIC value. From the analysis of the obtained data, some correlation regarding the structure and the antibacterial activity of the bis-QAMs could be drawn: a flexible alkyl C12 spacer between the two quaternary ammonium moieties increased the monomer antibacterial effect in comparison to the aromatic ones; the equilibrium between hydrophobic and hydrophilic moieties was directly correlated to the bactericidal range of action; the increase of the steric hindrance of the ammonium side groups might be both advantageous or disadvantageous to the antibacterial efficacy depending on the whole monomer chemical structure. Even though the possible correlation between the monomer structures and their bacteriostatic or bactericidal effect is under investigation, the monomers exhibited low cytotoxicity on human dental pulp stem cells, confirming their promising potential in the dental materials' field. STATEMENT OF SIGNIFICANCE: The use of dental resins with antibacterial monomers might prevent the formation of secondary caries at the restoration margins. For this purpose, a series of di-methacrylate bis-quaternary ammonium monomers (QAMs) was developed. Unlike antibacterial mono-methacrylate monomers already described in the literature, the synthesized di-methacrylate monomers have the potential of acting as cross-linkers stabilizing the polymeric network and bear two quaternary ammonium groups that increase their antibacterial ability. The QAMs exert bactericidal activity on both Gram(+) and Gram(-) bacterial strains maintaining at the same time good biocompatibility with the oral environment. Some structural elements of the monomers were clearly related to high antibacterial properties, and this can help design new active structures and better understand their mechanism of action.

Vickers Hardness and Shrinkage Stress Evaluation of Low and High Viscosity Bulk-Fill Resin Composite.

The aim of this in vitro study was to evaluate the hardness and shrinkage stress (SS) of six bulk-fill resin composites. To evaluate microhardness (MH), ten 6 mm specimens were prepared using a metal mold for each selected bulk-fill resin composite and irradiated from the top side for 40 s using an LED light. After 24 h of storage, Vickers MH was evaluated on the upper, lower and lateral sides of the specimens. SS evaluation was then performed with a universal machine, which evaluated the contraction force generated by a bulk-fill composite specimen placed between two metal cylinders during and after light curing. The results were evaluated with a one-way ANOVA test with a post-hoc Bonferroni test and linear regression analysis (p < 0.05). All materials showed a significant MH decrease between the top and bottom surfaces. However, the bulk-fill materials tested performed differently when considering lateral depth progression. ANOVA tests for SS evaluation showed that both SDR and Venus Bulk Fill had significantly lower stress during irradiation than other tested materials. Further, MH decrease became significantly lower from the top surface at different depths in each tested group. Among the different resins, Venus Bulk Fill and SDR showed not only inferior hardness, but also a significant reduction in SS.

Chlorhexidine preserves the hybrid layer in vitro after 10-years aging.

OBJECTIVE: The present study investigated the ability of a chlorhexidine (CHX)-containing primer (0.2% aqueous solution) to inhibit dentinal enzymes, preserve the hybrid layer (HL) and remain within the HL, after 10 years of aging in artificial saliva at 37°C. METHODS: Non-carious extracted molars were assigned to two groups, cut into slabs exposing middle/deep dentin, etched and bonded with Adper Scotchbond 1XT (SB1XT) with or without 0.2% CHX aqueous solution pretreatment. Composite build-ups were made, and the specimens were cut in 1-mm thick bonded sticks. In situ zymography was performed on freshly prepared specimens (T0) and specimens aged for 10 years (T10-yr) at 37°C in artificial saliva, to investigate endogenous gelatinolytic activity within the HL. At T10-yr, specimens were also decalcified and embedded in epoxy resin for TEM analysis. Micro-Raman spectroscopy was performed at T0 and T10-yr to evaluate the chemical profiles in intertubular dentin and the HL. RESULTS: In situ zymography showed less pronounced enzymatic activity in the CHX-pretreated group (p<0.05) regardless of aging, maintaining a similar level of fluorescence at T0 and T10-yr (p>0.05). TEM results showed that 98% of the HL had been degraded in the control group, while 95% of the HL was intact in the experimental group. Moreover, all the Raman spectra peaks assigned to CHX could be identified only in the CHX-pretreated group (T0 and T10-yr). SIGNIFICANCE: In vitro, CHX remains in the HL after 10 years with its inhibitory effect preserved. This may be the underlying factor for HL preservation after this long aging period.

Long-term bond strength and endogenous enzymatic activity of a chlorhexidine-containing commercially available adhesive.

OBJECTIVES: The aim of this study was to investigate, by the means of microtensile bond strength (µTBS) test, gelatin and in situ zymography, the influence of 0.2% CHX contained within a commercially available adhesive on long-term bond strength and endogenous enzymatic activity. METHODS: Non-carious teeth were subjected to µTBS test (N = 15 for each group) and stressed until failure. µTBS was evaluated immediately and after 12-month storage in artificial saliva at 37 °C. Dentin powder was obtained from additional teeth (N = 7) for gelatin zymography, while for in situ zymography, 3 teeth for each group were selected. Gelatin and in situ zymography were performed in dentin powder and slices of dentin, respectively, to assess the ability of 0.2% CHX blended within the adhesive to inhibit endogenous enzymatic activity. RESULTS: µTBS bond strength was higher in the CHX-containing groups, immediately as well as after aging. The bond strength significantly decreased after 12-month aging. The activation of endogenous MMPs was found to be related to the presence of CHX within the adhesive system and the bonding strategy employed. CONCLUSIONS: Under this perspective 0.2% CHX blended within Peak Universal adhesive monomer seems to increase immediate bond strength, to preserve bond strength over time and to efficiently inhibit endogenous enzymatic activity in dentin. Hence, blending the CHX in low concentrations within the adhesive could be recommended as a feasible technique in every-day clinical practice. CLINICAL SIGNIFICANCE: Using CHX-containing adhesives could be recommended due to several benefits: it seems to increase the longevity of the hybrid layer; the inhibitor appears to be efficiently delivered to the dentinal substrate and to inhibit endogenous enzymatic activity, without prolonging chair time.

Effects of Finish Line Design and Fatigue Cyclic Loading on Phase Transformation of Zirconia Dental Ceramics: A Qualitative Micro-Raman Spectroscopic Analysis.

OBJECTIVES: Stresses produced during the fabrication of copings and by chewing activity can induce a tetragonal-to-monoclinic (t⁻m) transformation of zirconia. As a consequence, in the m-phase, the material is not able to hinder possible cracks by the favorable mechanism known as "transformation toughening". This study aimed at evaluating if different marginal preparations of zirconia copings can cause a premature phase transformation immediately after manufacturing milling and after chewing simulation. METHODS: Ninety copings using three commercial zirconia ceramics (Nobel Procera Zirconia, Nobel Biocare Management AG; Lava Classic, 3M ESPE; Lava Plus, 3M ESPE) were prepared with deep-chamfer, slight-chamfer, or feather-edge finish lines (n = 10). Specimens were tested in a chewing simulator (CS-4.4, SD Mechatronik) under cyclic occlusal loads simulating one year of clinical service. Raman spectra were acquired and analyzed for each specimen along the finish lines and at the top of each coping before and after chewing simulation, respectively. RESULTS: Raman analysis did not show any t⁻m transformation both before and after chewing simulation, as the typical monoclinic bands at 181 cm-1 and 192 cm-1 were not detected in any of the tested specimens. CONCLUSIONS: After a one-year simulation of chewing activity, irrespective of preparation geometry, zirconia copings did not show any sign of t⁻m transformation, either in the load application areas or at the margins. Consequently, manufacturing milling even in thin thickness did not cause any structural modification of zirconia ceramics "as received by manufacturers" both before and after chewing simulation.

The role of polymerization in adhesive dentistry.

Adhesive systems are resin-based materials that reach their final mechanical properties through a polymerization process. Previous literature correlated the failure of the adhesive interface to low polymer setting. Adhesives systems are elaborate mixtures of different molecules of both hydrophilic and hydrophobic nature, included in the formulation to adequately infiltrate the complex dental substrate or added to prolong the stability of the adhesive layer over time. Each adhesive component may influence the polymerization reaction of the material. Photopolymerization is a complex reaction that has several clinical implications, and besides the material composition, it is influenced by multiple factors, including the substrate characteristics, the operator technique, and the light cure unit properties. This review is focused on the analysis of factors that have a potential role in the setting of adhesive materials and thus the ultimate characteristics of the adhesive layer and the stability of the resin-dentin interface.

Approach to prevention of musculoskeletal symptoms in dental students: an interventional study.

BACKGROUND: Work-related musculoskeletal (MS) disorders are very common among dentists due to abnormal positions maintained during their work. There is the need to teach undergraduate students ergonomic procedures to prevent MS pain and disorders. METHODS: All the students of the School of Dentistry at the University of Trieste were enrolled for the study (No. 55). A self-administered questionnaire was used to collect anthropometric information, previous or current diseases, MS pain and disorders and work tasks performed. All students attended a training course. Three months after the training they completed a follow-up questionnaire. RESULTS: All students reported MS pain: higher at cervical level (91%), lower at lumbosacral level (64.2%), shoulders (43.6%), and wrist/hand level (41.8%). Forty-nine percent of students reported an improvement in pain symptoms (p<0.05) 3 months after the training. CONCLUSIONS: The prevalence of pain symptoms was high but the training course helped reduce symptoms. Theory and practice of ergonomics should be incorporated into dental undergraduate curricula.

Influence of polymerization time on properties of dual-curing cements in combination with high translucency monolithic zirconia.

PURPOSE: The aim of this in vitro study was to assess conversion degree (DC), micro-hardness (MH) and bond strength of two dual-curing resin cements employed under translucent monolithic zirconia irradiated with different time protocols. METHODS: 84 square shaped samples of 1mm thickness were prepared from high translucency zirconia blocks and divided into two groups (n=24) according to the cement employed: (1) Rely-X Ultimate; (2) Panavia SA. Each group was further divided into 3 subgroups (n=8) according to the irradiation time: (a) no light; (b) 20s; (c) 120s. Light curing was performed 60s after the sample was placed on the diamond support of a FT-IR spectrophotometer with a high power multiLED lamp. Final DC% were calculated after 10min. After 24h, Vickers Test on the cement layer was performed. The same protocol was used to lute composite cylinders in order to evaluate microshear bond-strength test. ANOVA and Bonferroni tests were performed to find differences between MH and bond-strength to zirconia, while for DC% the Scheirer-Ray-Hare two-way test was used. RESULTS: The two cements reached higher DC% in subgroup (b) and (c). As concern MH, statistics showed an increase in curing time was able to improve MH significantly. Bond-strength was not affected by irradiation time only for Panavia SA. CONCLUSIONS: The first null hypothesis has to be rejected since DC% and MH of the dual-cements tested were influenced by the curing time. The second null hypothesis is partially rejected since the bond strength was influenced by the curing time only for Rely-X Ultimate.