RESUMEN
The most used piece of equipment for sonochemistry is the ultrasonic cleaning bath. However, what is sometimes forgotten by scientists new to sonochemistry is the vital importance of the shape and positioning of any reaction vessel in the bath to obtain the most efficient and reproducible results. In experiments using an ultrasonic bath, a glass vessel (reactor) is inserted into the water contained in the bath. The water acts as the coupling medium for the transfer of acoustic energy from the transducer to the vessel (termed indirect sonication). The position of the reaction vessel above the base of the US bath can change the energy transmitted into it over a wide range of values (in our system between 100-500 J). We have carried out a study of the vertical distribution of the ultrasound field in a common type of ultrasound bath, comparing conventional sonochemistry dosimeters with a new and very simple approach using the Ultrasonic Capillary Effect (UCE) which can be performed in any laboratory. The technique involves the use of a capillary tube, to locate the vertical positions of acoustic pressure maxima above a single transducer on the base of the bath. The results are compared with those obtained using calorimetry, iodimetry, a cavitometer and the perforation of aluminium foil. The results show that the optimum position for the reaction vessel can be located very simply using UCE.
RESUMEN
Hedera helix L. contains phytochemicals with good biological properties which are beneficial to human health and can be used to protect plants against different diseases. The aim of this research was to find the most suitable extraction method and the most favorable parameters for the extraction of different bioactive compounds from ivy leaves. Different extraction methods, namely microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), and conventional heating extraction (CHE), were used. The most suitable method for the extraction of saponins is MAE with an extraction efficiency of 58%, while for carbohydrates and polyphenols, the best results were achieved via UAE with an extraction efficiency of 61.7% and 63.5%, respectively. The antioxidant activity (AA) of the extracts was also determined. The highest AA was obtained via UAE (368.98 ± 9.01 µmol TR/gDM). Better results were achieved at 50 °C for 10 min of extraction, using 80% ethanol in water as solvent. In order to evaluate their in vitro cytotoxicity, the extracts richest in bioactive compounds were tested on NCTC fibroblasts. Their influence on the DNA content of RAW 264.7 murine macrophages was also tested. Until 200 µg/mL, the extracts obtained via UAE and MAE were cytocompatible with NCTC fibroblasts at 48 h of treatment. Summarizing the above, both MAE and UAE can be employed as green and efficient methods for producing extracts rich in bioactive compounds, exhibiting strong antioxidant properties and good noncytotoxic activity.
RESUMEN
The influence of ultrasound irradiation on the algal biomass productivity as well as its oil content and fatty acids profile, grown in a modified Zarrouk medium, i.e., deproteinized whey waste solution, was investigated. The algal samples (Nannochloris sp. 424-1 microalgae) were grown for 7 days in a thermostated incubator at 28 °C, shaken under continuous light. During this period, the algal biomass was subjected to induced stress by ultrasonic irradiation at different powers and sonication time. The obtained results demonstrate that ultrasound stressing of algae biomass has a positive effect on both the quantity of biomass and the oil obtained, also causing a shift in fatty acid composition by increasing the proportion of C16 and C18 polyunsaturated fatty acids. A low dosage level of exposure to the ultrasound led to algal biomass increase as well as lipid accumulation. For both types of irradiation modes which were investigated, daily and only initial irradiation, the beneficial effect of the ultrasound decreases as the exposure time increases and the excessive sonication becomes detrimental to microalgae growth.
RESUMEN
One of the main strategies for sustainable human society progress is the development of efficient strategies to limit waste production and maximize renewable resource utilization. In this context, this review highlights the opportunity to transform vegetable biomass residues into valuable commercial products. Biomass conversion entails the depolymerization of lignocellulosic biomass towards biopolyols and the synthesis and characterization of the valuable products obtained by using them. The influence of the reaction parameters in both acid and basic catalysis is highlighted, respectively the influence of microwaves on the liquefaction reaction versus conventional heating. Following the depolymerization reaction, polyols are employed to produce polyurethane foams. As a special characteristic, the addition of flame-retardant properties was emphasized. Another interesting topic is the biodegradability of these products, considering the negative consequences that waste accumulation has on the environment.
RESUMEN
The aim of this study was to establish the best ultrasound assisted extraction (UAE) conditions of saponins from Hedera helix L. leaves and to evaluate the in vitro biocompatibility of the extracts richest in saponins. Different parameters, such as extraction time, temperature, ultrasound power, solvent to plant material ratio, and solvent concentration, were investigated. The most efficient extraction conditions were a temperature of 50 °C, an ultrasound amplitude of 40%, an extraction time of 60 min, a plant material to solvent ratio of 1:20 (w:v), and 80% ethanol as solvent. In vitro cytotoxicity of the extracts richest in saponins and their influence on the DNA content of L929 (NCTC) fibroblasts were tested. Until 200 µg/mL, the studied extracts were cytocompatible with L929 fibroblast cell lines at 48 h of treatment. These in vitro cell culture results provide useful information for further applications of Hedera helix extracts in a pharmaceutical field.
RESUMEN
This study presents the functionalization and characterization of graphene and electromagnetic interference (EMI) attenuation capacity in epoxy-nanocomposites. The modification of graphene involved both small molecules and polymers for compatibilization with epoxy resin components to provide EMI shielding. The TGA and RAMAN analyses confirmed the synthesis of graphene with a different layer thickness of the graphene sheets. Graphene samples with different layer thicknesses (monolayer, few layers, and multilayer) were selected and further employed for epoxy coating formulation. The obtained nanocomposites were characterized in terms of EMI shielding effectiveness, SEM, micro-CT, magnetic properties, and stress-strain resistance. The EMI shielding effectiveness results indicated that the unmodified graphene and hexamethylene diamine (HMDA) modified graphene displayed the best EMI shielding properties at 11 GHz. However, the epoxy nanocomposites based on HMDA modified graphene displayed better flexibility with an identical EMI shielding effectiveness compared to the unmodified graphene despite the formation of aggregates. The improved flexibility of the epoxy nanocomposites and EMI shielding characteristics of HMDA functionalized graphene offers a practical solution for textile coatings with microwave absorbing (MA) capacity.
RESUMEN
This work is focused on the study of the esterification parameters for the ultrasound assisted synthesis of isoamyl acetate catalyzed by lipase Lipozyme 435 in a continuous loop reactor. Investigating the influence of different parameters shows that a higher concentration of ester (462 mg/g mixture) can be obtained at a temperature of 50 °C, flow rate 0.16 mL/min. The best ultrasonication conditions are: sonication applied continuously for a short time (20 min), ultrasound power 32 mW and amplitude 20%. The enzyme can be successfully reused tree times without loss of enzyme activity. Reaction kinetics for isoamyl acetate ultrasound assisted production showed that satisfactory reaction concentration (close to the equilibrium concentrations) could be reached in short reaction times (2 h). Ultrasound assisted enzymatic esterification is consequently a cleaner and a faster process.
RESUMEN
This study aimed to develop a facile synthesis procedure for heterogeneous catalysts based on organic guanidine derivatives superbases chemically grafted on silica-coated Fe3O4 magnetic nanoparticles. Thus, the three organosilanes that were obtained by reacting the selected carbodiimides (N,N'-dicyclohexylcarbodiimide (DCC), N,N'-diisopropylcarbodiimide (DIC), respectively 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) with 3-aminopropyltriethoxysilane (APTES) were used in a one-pot synthesis stage for the generation of a catalytic active protective shell through the simultaneous hydrolysis/condensation reaction with tetraethyl orthosilicate (TEOS). The catalysts were characterized by FTIR, TGA, SEM, BET and XRD analysis confirming the successful covalent attachment of the organic derivatives in the silica shell. The second aim was to highlight the capacity of microwaves (MW) to intensify the transesterification process and to evaluate the activity, stability, and reusability characteristics of the catalysts. Thus, in MW-assisted transesterification reactions, all catalysts displayed FAME yields of over 80% even after 5 reactions/activation cycles. Additionally, the influence of FFA content on the catalytic activity was investigated. As a result, in the case of Fe3O4@SiO2-EDG, a higher tolerance towards the FFA content can be noticed with a FAME yield of over 90% (for a 5% (weight) vs oil catalyst content) and 5% weight FFA content.
RESUMEN
Preventing and controlling the spread of multidrug-resistant (MDR) bacteria implicated in healthcare-associated infections is the greatest challenge of the health systems. In recent decades, research has shown the need for passive antibacterial protection of surfaces in order to reduce the microbial load and microbial biofilm development, frequently associated with transmission of infections. The aim of the present study is to analyze the efficiency of photocatalytic antimicrobial protection methods of surfaces using the new photocatalytic paint activated by light in the visible spectrum. The new composition is characterized by a wide range of analytical methods, such as UV-VIS spectroscopy, electron microscopy (SEM), X-ray powder diffraction (PXRD) or X-ray photoelectron spectroscopy (XPS). The photocatalytic activity in the UV-A was compared with the one in the visible light spectrum using an internal method developed on the basis of DIN 52980: 2008-10 standard and ISO 10678-2010 standard. Migration of metal ions in the composition was tested based on SR EN1186-3: 2003 standard. The new photocatalytic antimicrobial method uses a type of photocatalytic paint that is active in the visible spectral range and generates reactive oxygen species with inhibitory effect against all tested microbial strains.
RESUMEN
Ultrasound (US) and Microwaves (MW) are effective methods for processes intensification. Their combined use in the same reactor can lead to remarkable results. Recently there has been a resurgence of interest in this field for new synthetic applications using reactors based upon existing technologies. We describe here a new type of apparatus in which the thermal energy is continuously removed from the system making possible the use of high power and adjustable ultrasonic and microwave densities throughout the process. The installation consists of a glass reactor located in a monomode applicator which is immersed at the same time in an ultrasonic device which can be operated at different frequencies and powers. A liquid, transparent to microwaves, was used to couple ultrasonic energy to the reactor and to remove the heat generated. Comsol software was used to get information about the distribution of ultrasonic and microwave energy between the reactor liquid and the coupling fluid. The performance was assessed using the conversion of p-nitrophenol into 4-nitrocatechol as a chemical dosimeter and a transesterification.
RESUMEN
Currently there is a drive towards the minimisation and reclamation of valuable materials from the waste products of the food and beverage industry. This can be achieved through the extraction of residual nutraceuticals from such materials. Tomato pomace contains carotenoids and other chemicals which can be extracted directly into edible oils to improve the health-giving properties of such oils. We report here a novel green solvent, fatty acid ethyl esters (FAEE), which is significantly more effective than sunflower oil and hexane for the extraction of lycopene and beta-carotene from tomato skin waste. FAEE are a non-toxic renewable resource that is environmentally friendly and to our knowledge has never been used as a vegetal extraction fluid. The efficiency of FAEE extraction was significantly improved relative to both sunflower oil and hexane under ultrasound-assisted extraction (UAE) conditions. In addition, FAEE have the additional and significant advantage that once enriched with the extracted nutraceuticals can be used directly as a food additive.
Asunto(s)
Carotenoides/aislamiento & purificación , Ésteres/química , Ácidos Grasos/química , Solanum lycopersicum/química , Residuos , Carotenoides/química , HumanosRESUMEN
Calcium alginate (CaAlg) beads were prepared using ultrasound for use in the removal of lead from natural and wastewaters by ion exchange. Ultrasound was applied in a batch mode with an ultrasonic bath or in a flow mode using an ultrasonic clamp-on device. For comparison purposes the synthesis was performed in batch mode in the absence of the ultrasound. The beads prepared using ultrasound showed a greater ion exchange capability which could be ascribed to a larger specific surface area as a result of surface roughening induced by cavitation. Scanning Electron Microscopy (SEM) images revealed that the roughening was in the form of corrugation for the product with the best ion exchange capability obtained in the flow process where preformed CaAlg droplets were subjected to ultrasound during the setting process. These beads performed 11% better for lead removal than those synthesized in the absence of ultrasound.
RESUMEN
Sea buckthorn (Hippophae Rhamnoides L.) is an important source of bioactive compounds such as: antioxidants, vitamins, fatty acids, amino acids, and minerals. Sea buckthorn leaves extracts have been proved to have anti-microbial, antioxidant, anti-inflammatory, and anti-viral properties. In this paper, the extraction of polyphenols from sea buckthorn leaves using a semi-continuous small-scale reactor is described. The extraction conditions must not affect the composition and structure of polyphenols. For this reason, the influence of different parameters (residence time, solvent flow rate, stirring rate, reactor type, and solvent pre-heating) on the extraction process were studied. The polyphenolic extracts were analyzed in order to determine the total phenolic content (TPC), the antioxidant capacity and the concentration of the main phenolic compounds. The TPC increases with the stirring rate. Pre-heating the solvent leads to a better yield and reduced residence time. The antioxidant capacity is in concordance with the TPC results. HPLC analysis confirms that the semi-continuous microwave assisted extraction (MAE) does not affect the composition of the extracts. The energy consumption was significantly lower for MAE compared with conventional extraction (CE).
Asunto(s)
Hippophae/química , Extractos Vegetales/química , Hojas de la Planta/química , Polifenoles/química , Antioxidantes/análisis , Antioxidantes/química , Fraccionamiento Químico/métodos , Cromatografía Líquida de Alta Presión , Fenoles/análisis , Fitoquímicos/análisis , Fitoquímicos/química , Extractos Vegetales/aislamiento & purificación , Polifenoles/análisis , Polifenoles/aislamiento & purificación , SolventesRESUMEN
At this time biodiesel appears to be a viable proposition as a renewable energy source and an alternative to fossil-based fuels. Following many years of research, the use of process intensification techniques for the production of biodiesel is well documented. This work has focused more on a study of biodiesel production using continuous flow systems assisted by acoustic cavitation (ultrasonic or hydrodynamic) or microwaves. The target end user is the small or medium farm where such equipment could provide sufficient fuel for on-site agricultural machinery using renewable or waste green materials produced on site.
RESUMEN
The aim of this study was to obtain membranes with antimicrobial activity presenting a complex sandwich-type structure. The outer layers are comprised of poly(methyl methacrylate) membranes, whereas the inner active layer consists of a modified commercial membrane to achieve antimicrobial properties. This activity arises due to the presence of silver nanoparticles in a material with a hybrid composition deposited on a commercial membrane. This hybrid material consists of polymer colloids and multiwall carbon nanotubes used for both the stabilization of the active layer by the interconnections of the polymer particles and as active component. The filtration tests revealed a good stability of the materials and an increased hydrophilicity of the hybrid membranes. The antimicrobial properties have been evaluated using Staphylococcus aureus and Escherichia coli, and have been correlated with the content and migration rate of silver ions.
Asunto(s)
Antibacterianos/farmacología , Coloides/química , Membranas Artificiales , Nanopartículas del Metal/química , Nanotubos de Carbono/química , Polímeros/química , Plata/farmacología , Acrilatos/química , Escherichia coli/efectos de los fármacos , Filtración , Nanopartículas del Metal/ultraestructura , Pruebas de Sensibilidad Microbiana , Nanotubos de Carbono/ultraestructura , Espectrofotometría Ultravioleta , Espectrometría Raman , Staphylococcus aureus/efectos de los fármacos , Estireno/químicaRESUMEN
This work presents a hybrid technology and two hybrid installations (HI-1 and HI-2) for volatile organic compounds (VOCs) removal using successive or simultaneous microwave (MW) irradiation, electron beam (EB) irradiation, and catalytic oxidation. HI-1 is designed for successive EB and MW irradiation with two distinct reactors, both containing a catalyst inside. HI-2 is designed for simultaneous EB and MW irradiation in the same reactor containing a catalyst. Real synergistic effects between non-thermal plasma (NTP) and catalysis were obtained by introducing the catalyst into the irradiation zone, i.e. into the MW reactor EB reactor or into a reactor in which both EB and MW are injected.
RESUMEN
This work presents a method and a semi-pilot scale installation (SPSI) for the simultaneous SO2 and NOx removal by separate and combined microwave (MW) and electron beam (EB) irradiation. The SPSI consists mainly of the following units: a gaseous mixture preparation system (GMPS), a microwave source (MS) of 2.45 GHz and 4.2 kW maximum output power an electron beam source (EBS) of 1.8 MeVand 10.8 kW maximum output power and a multimode rectangular cavity (MRC), used as reaction chamber in which are injected both MW and EB fields. The most important parameters for high SO2 removal efficiencies obtained by MW technology are water and ammonia concentration, the gaseous mixture temperature during irradiation process and MW power level. The most important parameter for high NOx removal efficiency obtained by MW technology is MW power level. The removal efficiencies obtained by MW processing were up to 95% for SO2 and up to 55% for NOx. The additional use of EB irradiation to MW exposure strongly increases NOx removal efficiencies in comparison with MW exposure only, up to 95%, simultaneously providing very high values for the SO2 removal efficiency, near 100%.
RESUMEN
Liquid-phase polymerisation of acrylamide-acrylic acid to form polyelectrolytes used in wastewater cleaning was examined using accelerated electron beam and microwave irradiation methods. Polymerisation was carried out in aqueous solutions at temperatures approximately 60 degrees C. Monomers total concentration was established at 40% (36% acrylamide and 4% acrylic acid). Only using the features of simultaneous radiation-induction and microwave heating can result in the formation of linear polymer chains with good water solubility and low residual monomer concentration. The flocculation capacity of the obtained polymers was tested using two wastewaters, one sampled from a slaughterhouse and the other from a vegetable oil plant. Quality indicators such as total suspended matters (TSM), chemical oxygen demand (COD), biological oxygen demand (BOD) and fat, oils and grease (FOG) were measured before and after the treatment with polymeric flocculants and compared with the results obtained in classical treatment with Al(2)(SO(4))(3). It was found that the combined treatment with polymers and Al(2)(SO(4))(3) increases the degree of purification of both wastewaters up to 99%.
Asunto(s)
Electrólitos/química , Polímeros/síntesis química , Purificación del Agua/instrumentación , Purificación del Agua/métodos , Acrilamida , Acrilatos , Polímeros/química , RadiaciónRESUMEN
Microwave discharges at 2.45 GHz frequency and accelerated electron beams operated at atmospheric pressure in synthetic gas mixtures containing N(2), O(2), CO(2), SO(2), and NO(x) are investigated experimentally for various gas mixture constituents and operating conditions, with respect to their ability to purify exhaust gases. An original experimental unit easily adaptable for both separate and simultaneous irradiation with microwaves and electron beams was set up. The simultaneous treatment with accelerated electron beams and microwaves was found to increase the removal efficiency of NO(x) and SO(2) and also helped to reduce the total required dose rate with approximately 30%. Concomitant removal of NO(x) ( approximately 80%) and SO(2) (>95%) by precipitation with ammonia was achieved.