Towards Room Temperature Thermochromic Coatings with controllable NIR-IR modulation for solar heat management & smart windows applications.

Solar heat management & green air-conditioning are among the major technologies that could mitigate heat islands phenomenon while minimizing significantly the CO2 global foot-print within the building & automotive sectors. Chromogenic materials in general, and thermochromic smart coatings especially are promising candidates that consent a noteworthy dynamic solar radiation Infrared (NIR-IR) regulation and hence an efficient solar heat management especially with the expected increase of the global seasonal temperature. Within this contribution, two major challenging bottlenecks in vanadium oxide based smart coatings were addressed. It is validated for the first time that the NIR-IR modulation of the optical transmission (∆TTRANS = T(T〈TMIT) - T(T〉TMIT) of Vanadium oxide based smart coatings can be controlled & tuned. This upmost challenging bottle-neck controllability/tunability is confirmed via a genuine approach alongside to a simultaneous drastic reduction of the phase transition temperature TMIT from 68.8 °C to nearly room temperature. More precisely, a substantial thermochromism in multilayered V2O5/V/V2O5 stacks equivalent to that of standard pure VO2 thin films but with a far lower transition temperature, is reported. Such a multilayered V2O5/V/V2O5 thermochromic system exhibited a net control & tunability of the optical transmission modulation in the NIR-IR (∆TTRANS) via the nano-scaled thickness' control of the intermediate Vanadium layer. In addition, the control of ∆TTRANS is accompanied by a tremendous diminution of the thermochromic transition temperature from the elevated bulk value of 68.8 °C to the range of 27.5-37.5 ºC. The observed remarkable and reversible thermochromism in such multilayered nano-scaled system of V2O5/V/V2O5 is likely to be ascribed to a noteworthy interfacial diffusion, and an indirect doping by alkaline ions diffusing from the borosilicate substrate. It is hoped that the current findings would contribute in advancing thermochromic smart window technology and their applications for solar heat management in glass windows in general, skyscraper especially & in the automotive industry. If so, this would open a path to a sustainable green air-conditioning with zero-energy input.

Effects of gamma radiation on the electrical properties of InAs/InGaAs quantum dot-based laser structures grown on GaAs and Si substrates by molecular beam epitaxy.

This study investigates the impact of gamma radiation on the electrical properties of InAs/InGaAs quantum dot-based laser structures grown on both GaAs (Sample A) and Si (Sample B) substrates using molecular beam epitaxy. The research explores the electrical characteristics of the lasers before and after being exposed to gamma radiation employing current-voltage (I-V), capacitance-voltage (C-V), deep level transient spectroscopy (DLTS) and Laplace DLTS techniques. The results show that the electrical properties of the lasers change due to gamma radiation exposure, and the extent of the change depends on the substrate used for growth. The I-V results revealed that the ideality factor (n) and built-in voltage were increased in Sample A and Sample B after radiation. Nonetheless, the series resistance (Rs) at room temperature decreased in both samples after radiation. Overall, this study provides valuable insights into the effects of gamma radiation on the electrical properties of InAs/InGaAs quantum dot lasers and highlights the importance of considering substrate materials in the design of radiation-hardened electronic devices.

Room temperature bio-engineered multifunctional carbonates for CO2 sequestration and valorization.

This contribution reports, for the first time, on an entirely green bio-engineering approach for the biosynthesis of single phase crystalline 1-D nano-scaled calcite CaCO3. This was validated using H2O as the universal solvent and natural extract of Hyphaene thebaica fruit as an effective chelating agent. In this room temperature green process, CaCl2 and CO2 are used as the unique source of Ca and CO3 respectively in view of forming nano-scaled CaCO3 with a significant shape anisotropy and an elevated surface to volume ratio. In terms of novelty, and relatively to the reported scientific and patented literature in relation to the fabrication of CaCO3 by green nano-chemistry, the current cost effective room temperature green process can be singled out as per the following specificities: only water as universal solvent is used, No additional base or acid chemicals for pH control, No additional catalyst, No critical or supercritical CO2 usage conditions, Only natural extract of thebaica as a green effective chelating agent through its phytochemicals and proper enzematic compounds, room Temperature processing, atmospheric pressure processing, Nanoscaled size particles, and Nanoparticles with a significant shape anisotropy (1-D like nanoparticles). Beyond and in addition to the validation of the 1-D synthesis aspect, the bio-engineered CaCO3 exhibited a wide-ranging functionalities in terms of highly reflecting pigment, an effective nanofertilizer as well as a potential binder in cement industry.

A novel approach for engineering efficient nanofluids by radiolysis.

This contribution reports for the first time the possibility of using radiolysis to engineer stable efficient nanofluids which exhibit an enhanced thermal conductivity. The validation was confirmed on Ag-H2O and Ag-C2H6O2 nanofluids fabricated via g-radiolysis within the mild dose range of 0.95 × 103-2.45 × 103 Gray. The enhanced thermal conductivity of Ag-H2O and Ag-C2H6O2 nanofluids, was found to be g-radiations dose dependent. In the latter case of Ag-C2H6O2 nanofluid, the relative enhancement in the temperature range of 25-50 °C was found to be 8.89%, 11.54%, 18.69%, 23.57% and 18.45% for D1 = 0.95 × 103 Gray, D2 = 1.2 × 103 Gray, D3 = 1.54 × 103 Gray, D4 = 1.80 × 103 Gray and D5 = 2.45 × 103 Gray respectively. Yet not optimized, an enhancement of the effective thermal conductivity as much as 23.57% relatively to pure C2H6O2 was observed in stable Ag-C2H6O2 nanofluids. Equivalent results were obtained with Ag-H2O.

Mercury goes Solid at room temperature at nanoscale and a potential Hg waste storage.

While room temperature bulk mercury is liquid, it is solid in its nano-configuration (Ønano-Hg ≤ 2.5 nm). Conjugating the nano-scale size effect and the Laplace driven surface excess pressure, Hg nanoparticles of Ønano-Hg ≤ 2.4 nm embedded in a 2-D turbostratic Boron Nitride (BN) host matrix exhibited a net crystallization at room temperature via the experimentally observed (101) and (003) diffraction Bragg peaks of the solid Hg rhombohedral α-phase. The observed crystallization is correlated to a surface atomic ordering of 7 to 8 reticular atomic plans of the rhombohedral α-phase. Such a novelty of size effect on phase transition phenomena in Hg is conjugated to a potential Hg waste storage technology. Considering the vapor pressure of bulk Hg, Room Temperature (RT) Solid nano-Hg confinement could represent a potential green approach of Hg waste storage derived from modern halogen efficient light technology.

From Khoi-San indigenous knowledge to bioengineered CeO2 nanocrystals to exceptional UV-blocking green nanocosmetics.

Single phase CeO2 nanocrystals were bio-synthesized using Hoodia gordonii natural extract as an effective chelating agent. The nanocrystals with an average diameter of 〈Ø〉 ~ 5-26 nm with 4+ electronic valence of Ce displayed a remarkable UV selectivity and an exceptional photostability. The diffuse reflectivity profile of such CeO2 exhibited a unique UV selectivity, in a form of a Heaviside function-like type profile in the solar spectrum. While the UV reflectivity is significantly low; within the range of 0.7%, it reaches 63% in the VIS and NIR. Their relative Reactive Oxygen Species (ROS) production was found to be < 1 within a wide range of concentration (0.5-1000 µg/ml). This exceptional photostability conjugated to a sound UV selectivity opens a potential horizon to a novel family of green nano-cosmetics by green nano-processing.

Optical properties of biosynthesized nanoscaled Eu2O3 for red luminescence applications.

This contribution reports on the optical properties of biosynthesised Eu2O3 nanoparticles bioengineered for the first time by a green and cost effective method using aqueous fruit extracts of Hyphaene thebaica as an effective chelating and capping agent. The morphological, structural, and optical properties of the samples annealed at 500°C were confirmed by using a high-resolution transmission electron microscope (HR-TEM), x-ray diffraction analysis (XRD), UV-Vis spectrocopy, and photoluminescence spectrometer. The XRD results confirmed the characteristic body-centered cubic (bcc) structure of Eu2O3 nanoparticles with an average size of 20 nm. HR-TEM revealed square type morphology with an average size of ∼6nm. Electron dispersion energy dispersive x-ray spectroscopy spectrum confirmed the elemental single phase nature of pure Eu2O3. Furthuremore, the Fourier transformed infrared spectroscopy revealed the intrinsic characteristic peaks of Eu-O bond stretching vibrations. UV-Vis reflectance proved that Eu2O3 absorbs in a wide range of the solar spectrum from the VUV-UV region with a bandgap of 5.1 eV. The luminescence properties of such cubic structures were characterized by an intense red emission centered at 614 nm. It was observed that the biosynthesized Eu2O3 nanoparticles exhibit an efficient red-luminescence and hence a potential material as red phosphor.

Remarkable thermal conductivity enhancement in Ag-decorated graphene nanocomposites based nanofluid by laser liquid solid interaction in ethylene glycol.

We report on the synthesis and enhanced thermal conductivity of stable Ag-decorated 2-D graphene nanocomposite in ethylene glycol based nanofluid by laser liquid solid interaction. A surfactant free nanofluid of Ag nanoparticles anchored onto the 2-D graphene sheets were synthesized using a two-step laser liquid solid interaction approach. In order to understand a pulsed Nd:YAG laser at the fundamental frequency (λ = 1,064 nm) to ablate Ag and graphite composite target submerged in ethylene glycol (EG) to form AgNPs decorated 2-D GNs-EG based nanofluid. From a heat transfer point of view, it was observed that the thermal conductivity of this stable Ag-graphene/EG is significantly enhanced by a factor of about 32.3%; this is highest reported value for a graphene based nanofluid.

Revealing the nature of low-temperature photoluminescence peaks by laser treatment in van der Waals epitaxially grown WS2 monolayers.

Monolayers of transition metal dichalcogenides (TMD) are promising materials for optoelectronics devices. However, one of the challenges is to fabricate large-scale growth of high quality TMD monolayers with the desired properties in order to expand their use in potential applications. Here, we demonstrate large-scale tungsten disulfide (WS2) monolayers grown by van der Waals Epitaxy (VdWE). We show that, in addition to the large structural uniformity and homogeneity of these samples, their optical properties are very sensitive to laser irradiation. We observe a time instability in the photoluminescence (PL) emission at low temperatures in the scale of seconds to minutes. Interestingly, this change of the PL spectra with time, which is due to laser induced carrier doping, is employed to successfully distinguish the emission of two negatively charged bright excitons. Furthermore, we also detect blinking sharp bound exciton emissions which are usually attractive for single photon sources. Our findings contribute to a deeper understanding of this complex carrier dynamics induced by laser irradiation which is very important for future optoelectronic devices based on large scale TMD monolayers.

Surface effects of vapour-liquid-solid driven Bi surface droplets formed during molecular-beam-epitaxy of GaAsBi.

Herein we investigate a (001)-oriented GaAs1-xBix/GaAs structure possessing Bi surface droplets capable of catalysing the formation of nanostructures during Bi-rich growth, through the vapour-liquid-solid mechanism. Specifically, self-aligned "nanotracks" are found to exist trailing the Bi droplets on the sample surface. Through cross-sectional high-resolution transmission electron microscopy the nanotracks are revealed to in fact be elevated above surface by the formation of a subsurface planar nanowire, a structure initiated mid-way through the molecular-beam-epitaxy growth and embedded into the epilayer, via epitaxial overgrowth. Electron microscopy studies also yield the morphological, structural, and chemical properties of the nanostructures. Through a combination of Bi determination methods the compositional profile of the film is shown to be graded and inhomogeneous. Furthermore, the coherent and pure zincblende phase property of the film is detailed. Optical characterisation of features on the sample surface is carried out using polarised micro-Raman and micro-photoluminescence spectroscopies. The important light producing properties of the surface nanostructures are investigated through pump intensity-dependent micro-PL measurements, whereby relatively large local inhomogeneities are revealed to exist on the epitaxial surface for important optical parameters. We conclude that such surface effects must be considered when designing and fabricating optical devices based on GaAsBi alloys.

Mechanism of periodic height variations along self-aligned VLS-grown planar nanostructures.

In this study we report in-plane nanotracks produced by molecular-beam-epitaxy (MBE) exhibiting lateral self-assembly and unusual periodic and out-of-phase height variations across their growth axes. The nanotracks are synthesized using bismuth segregation on the GaAsBi epitaxial surface, which results in metallic liquid droplets capable of catalyzing GaAsBi nanotrack growth via the vapor-liquid-solid (VLS) mechanism. A detailed examination of the nanotrack morphologies is carried out employing a combination of scanning electron and atomic force microscopy and, based on the findings, a geometric model of nanotrack growth during MBE is developed. Our results indicate diffusion and shadowing effects play significant roles in defining the interesting nanotrack shape. The unique periodicity of our lateral nanotracks originates from a rotating nucleation "hot spot" at the edge of the liquid-solid interface, a feature caused by the relative periodic circling of the non-normal ion beam flux incident on the sample surface, inside the MBE chamber. We point out that such a concept is divergent from current models of crawling mode growth kinetics and conclude that these effects may be utilized in the design and assembly of planar nanostructures with controlled non-monotonous structure.

W line shape in the resistively detected nuclear magnetic resonance.

The resistively detected nuclear magnetic resonance (RDNMR) performed on a two-dimensional electron gas is known to exhibit a peculiar 'dispersive' line shape at some filling factors, especially around ν = 1. Here, we study in detail the inversion of the dispersive line shape as a function of the filling factor from ν = 1 to 2/3. The RDNMR spectra show a new characteristic W line shape in the longitudinal resistance, whereas dispersive lines detected in the Hall resistance remain unchanged. This W resonance, like the dispersive line, can be fitted correctly by a model of two independent response functions, which are the signatures of polarized and unpolarized electronic sub-systems.

Visible to infrared low temperature luminescence of Er(3+), Nd(3+) and Sm(3+) in CaSnO3 phosphors.

Novel stannate phosphor, orthorhombic CaSnO3 phosphors doped with Er(3+), Nd(3+) and Sm(3+) have been synthesized by a conventional solid-state method under N2+H2 gas flow. Visible and near-infrared photoluminescence (PL) properties were investigated as function of laser power and temperature. It was observed that all dopant ions are well incorporated in CaSnO3 and are responsible for the optical emission in the temperature range of 10-300K. PL peaks at 490, 546, 656, 696, 894, 1065, and 1344nm were observed for the CaSnO3:Nd(3+) phosphor and associated to f-f transition of Nd(3+) ion. Emissions at 564, 600-607, 646-656 and 714nm were detected for the CaSnO3:Sm(3+). The strongest one, observed at 600nm, was associated to (4)G5/2→(6)H7/2 of Sm(3). Emission lines at 528, 548, 662 at 852nm were also seen for CaSnO3:Er(3+) and correspond to Er(3+) intra-4f(n) shell transitions. In addition, at low temperatures, a stark splitting of the 4f electron energy levels of the Er(3+) ions were observed in infrared region (1520-1558nm) and assigned to the transition between the (4)I13/2 state and the (4)I15/2 state. Finally, our results show that the rare earth doped CaSnO3 has remarkable potential for applications as optical material since it exhibits efficient and sharp emissions due to rare earth ions.

Raman scattering reveals strong LO-phonon-hole-plasmon coupling in nominally undoped GaAsBi: optical determination of carrier concentration.

We report room-temperature Raman scattering studies of nominally undoped (100) GaAs1−xBix epitaxial layers exhibiting Bi-induced (p-type) longitudinal-optical-plasmon-coupled (LOPC) modes for 0.018 ≤ x ≤ 0.048. Redshifts in the GaAs-like optical modes due to alloying are evaluated and are paralleled by strong damping of the LOPC. The relative integrated Raman intensities of LO(Γ) and LOPC ALO/ALOPC are characteristic of heavily doped p-GaAs, with a remarkable near total screening of the LO(Γ) phonon (ALO/ALOPC → 0) for larger Bi concentrations. A method of spectral analysis is set out which yields estimates of hole concentrations in excess of 5×1017cm−3 and correlates with the Bi molar fraction. These findings are in general agreement with recent electrical transport measurements performed on the alloy, and while the absolute size of the hole concentrations differ, likely origins for the discrepancy are discussed. We conclude that the damped LO-phonon-hole-plasmon coupling phenomena plays a dominant role in Raman scattering from unpassivated nominally undoped GaAsBi.

Subterahertz acoustical pumping of electronic charge in a resonant tunneling device.

We demonstrate that controlled subnanosecond bursts of electronic charge can be transferred through a resonant tunneling diode by successive picosecond acoustic pulses. The effect exploits the nonlinear current-voltage characteristics of the device and its asymmetric response to the compressive and tensile components of the strain pulse. This acoustoelectronic pump opens new possibilities for the control of quantum phenomena in nanostructures.

Improvement of the nutritional quality of foods as a public health tool.

OBJECTIVES: To assess the potential contribution of improving the nutritional quality of processed foods on individuals' nutritional intake and food supply. This paper also discusses the means to encourage firms to implement these reformulations, particularly in public/private partnerships. STUDY DESIGN: The French Observatory of Food Quality was created by the Government for the quantification and follow-up of food reformulation by the food industry. This nutritional composition database on branded products was matched with two consumption databases: TNS Kantar Worldpanel, which provides details on quantities bought and food expenditures; and INCA 2, an individuals' food consumption survey completed by the French Food Safety Agency. Three food groups were considered: breakfast cereals (355 items in 2008), biscuits and pastries (1805 items in 2008), and bread-based products (620 items in 2009). METHODS: First, the variability in nutrient composition within food categories was determined, which made it possible to consider several food composition modification scenarios within each category. The formulation of the food items with the lowest nutritional quality was modified to three different levels to improve the overall level of quality in a given category. Second, the quantities of sugars, fat, fibre and sodium delivered to the French market through breakfast cereals, biscuits, pastries and bread-based products were calculated for each scenario. Finally, the distribution of individuals' nutrient consumption from the three food groups among the French population was assessed. RESULTS: These scenarios generated important improvements of 1-22% (increase in the amount of fibre or decrease in the amounts of sugars, fat and sodium delivered to the market), depending on the scenario, the food group and the nutrient considered. Improvement of the products with the lowest nutritional quality would also lead to significant variation in individuals' nutrient consumption for the average adult and child consumers of the three groups (range 4.2-18.8%, depending on the scenario, the food group and the nutrient considered). CONCLUSION: Encouraging the reformulation of foods, especially for products with the lowest nutritional quality in each category of processed foods, is a worthy target for health policy makers. The methodology presented in this paper provides information for negotiations between policy makers and firms to quantify commitments in terms of their potential impacts on individuals' nutrient intake, and to check that the firms' commitments are actually met.

Ultrafast strain-induced current in a GaAs Schottky diode.

Picosecond acoustic pulses generated by femtosecond laser excitation of a metal film induce a transient current with subnanosecond rise time in a GaAs/Au Schottky diode. The signal consists of components due to the strain pulse crossing the edge of the depletion layer in the GaAs and also the GaAs/Au interface. A theoretical model is presented for the former and is shown to be in very good agreement with the experiment.

Deep-level Transient Spectroscopy of GaAs/AlGaAs Multi-Quantum Wells Grown on (100) and (311)B GaAs Substrates.

Si-doped GaAs/AlGaAs multi-quantum wells structures grown by molecular beam epitaxy on (100) and (311)B GaAs substrates have been studied by using conventional deep-level transient spectroscopy (DLTS) and high-resolution Laplace DLTS techniques. One dominant electron-emitting level is observed in the quantum wells structure grown on (100) plane whose activation energy varies from 0.47 to 1.3 eV as junction electric field varies from zero field (edge of the depletion region) to 4.7 × 10(6) V/m. Two defect states with activation energies of 0.24 and 0.80 eV are detected in the structures grown on (311)B plane. The E(c)-0.24 eV trap shows that its capture cross-section is strongly temperature dependent, whilst the other two traps show no such dependence. The value of the capture barrier energy of the trap at E(c)-0.24 eV is 0.39 eV.

Coherent terahertz sound amplification and spectral line narrowing in a stark ladder superlattice.

The bias voltage applied to a weakly coupled n-doped GaAs/AlAs superlattice increases the amplitude of the coherent hypersound oscillations generated by a femtosecond optical pulse. This bias-induced amplitude increase and experimentally observed spectral narrowing of the superlattice phonon mode with a frequency 441 GHz provides the evidence for hypersound amplification by stimulated emission of phonons in a system where the inversion of the electron populations for phonon-assisted transitions exists.

Optical imaging of electrical carrier injection into individual InAs quantum dots.

We image the micro-electroluminescence (EL) spectra of self-assembled InAs quantum dots (QDs) embedded in the intrinsic region of a GaAs p-i-n diode and demonstrate optical detection of carrier injection into a single QD. Tunneling of electrons and holes into the QDs at bias voltages below the flat-band condition leads to a spectrum of sharp EL lines from a small number of bright spots on the diode surface, characteristic of emission from individual QDs. We explain this behavior in terms of Coulomb interaction effects and the selective excitation of a small number of QDs within the ensemble due to preferential tunneling paths for carriers.