RESUMEN
In order to valorise winemaking grape stalks, subcritical water extraction at 160 and 180 °C has been carried out to obtain phenolic-rich extracts useful for developing active food packaging materials. Red (R) and white (W) varieties (from Requena, Spain) were used, and thus, four kinds of extracts were obtained. These were characterised as to their composition, thermal stability and antioxidant and antibacterial activity. The extracts were incorporated at 6 wt% into polylactic acid (PLA) films and their effect on the optical and barrier properties of the films and their protective effect against sunflower oil oxidation was analysed. Carbohydrates were the major compounds (25-38%) in the extracts that contained 3.5-6.6% of phenolic compounds, the R extracts being the richest, with higher radical scavenging capacity. Every extract exhibited antibacterial effect against Escherichia coli and Listeria innocua, while PLA films with extracts preserved sunflower oil against oxidation.
Asunto(s)
Antibacterianos , Antioxidantes , Escherichia coli , Embalaje de Alimentos , Listeria , Extractos Vegetales , Vitis , Embalaje de Alimentos/instrumentación , Vitis/química , Antioxidantes/química , Antioxidantes/farmacología , Extractos Vegetales/química , Extractos Vegetales/farmacología , Antibacterianos/farmacología , Antibacterianos/química , Escherichia coli/efectos de los fármacos , Escherichia coli/crecimiento & desarrollo , Listeria/efectos de los fármacos , Listeria/crecimiento & desarrolloRESUMEN
The present study reports on the development by thermoforming of highly sustainable trays based on a bilayer structure composed of paper substrate and a film made of a blend of partially bio-based poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA). The incorporation of the renewable succinic acid derived biopolyester blend film slightly improved the thermal resistance and tensile strength of paper, whereas its flexural ductility and puncture resistance were notably enhanced. Furthermore, in terms of barrier properties, the incorporation of this biopolymer blend film reduced the water and aroma vapor permeances of paper by two orders of magnitude, while it endowed the paper structure with intermediate oxygen barrier properties. The resultant thermoformed bilayer trays were, thereafter, originally applied to preserve non-thermally treated Italian artisanal fresh pasta, "fusilli calabresi" type, which was stored under refrigeration conditions for 3 weeks. Shelf-life evaluation showed that the application of the PBS-PBSA film on the paper substrate delayed color changes and mold growth for 1 week, as well as reduced drying of fresh pasta, resulting in acceptable physicochemical quality parameters within 9 days of storage. Lastly, overall migration studies performed with two food simulants demonstrated that the newly developed paper/PBS-PBSA trays are safe since these successfully comply with current legislation on plastic materials and articles intended to come into contact with food.
RESUMEN
The present work evaluates the food packaging performance of previously developed films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced with atomized microfibrillated cellulose (MFC) compatibilized by a reactive melt-mixing process. To this end, the novel green composite films were originally applied herein as lids in aluminum trays to preserve two dissimilar types of fatty foods, namely minced pork meat and sunflower oil. Results indicated that the PHBV/MFC films effectively preserved the physicochemical and microbiological quality of pork meat for one week of storage at 5 °C. In particular, the compatibilized green composite lid film yielded the lowest weight loss and highest oxidative stability, showing values of 0.935% and 0.78 malonaldehyde (MDA)/kg. Moreover, none of the packaged meat samples exceeded the acceptable Total Aerobial Count (TAC) level of 5 logs colony-forming units (CFU)/g due to the improved barrier properties of the lids. Furthermore, the green composite films successfully prevented sunflower oil oxidation in accelerated oxidative storage conditions for 21 days. Similarly, the compatibilized PHBV/MFC lid film led to the lowest peroxide value (PV) and conjugated diene and triene contents, with respective values of 19.5 meq O2/kg and 2.50 and 1.44 g/100 mL. Finally, the migration of the newly developed PHBV-based films was assessed using two food simulants, proving to be safe since their overall migration levels were in the 1-3 mg/dm2 range and, thus, below the maximum level established by legislation.
RESUMEN
Bilayer films of cassava starch-based (with 10% gellan gum) and polylactic (PLA): Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) polyester blend (with 75% PLA) monolayers were obtained by melt-blending and compression-molding, and the subsequent thermocompressing of both monolayers. Ferulic acid (FA) was incorporated into the polyester sheet by spraying and drying. Films were characterized in terms of their microstructure and functional properties throughout two months of storage at 25 °C and 53% relative humidity. The laminates exhibited improved tensile and barrier properties compared to the respective monolayers, which makes them more adequate for food packaging purposes. Surface incorporation of ferulic acid did not significantly modify the barrier and mechanical properties of the films while providing them with antioxidant and antibacterial capacity when applied in aqueous systems, where a complete release of active compounds occurred. The physical properties of the bilayers and layer thermo-sealing were stable throughout storage. Likewise, the antioxidant and antimicrobial active properties were preserved throughout storage. Therefore, these active bilayers represent a sustainable packaging alternative to non-biodegradable, non-recyclable synthetic laminates for food packaging purposes, which could extend the shelf-life of food due to their antioxidant and antibacterial properties.
RESUMEN
BACKGROUND: Inflammation control is a fundamental part of chronic care in patients with a history of cancer and comorbidity. As the risk-benefit profile of anti-inflammatory drugs is unclear in survivors of cancer, GPs and patients could benefit from alternative non-pharmacological treatment options for dysregulated inflammation. There is a potential for home-built environment (H-BE) interventions to modulate inflammation; however, discrepancies exist between studies. AIM: To evaluate the effectiveness of H-BE interventions on cancer-associated inflammation biomarkers. DESIGN & SETTING: A systematic review and meta-analysis of randomised and non-randomised trials in community-dwelling adults. METHOD: PubMed and MEDLINE, Embase, Web of Science, and Google Scholar will be searched for clinical trials published in January 2000 onwards. The study will include H-BE interventions modifying air quality, thermal comfort, non-ionising radiation, noise, nature, and water. No restrictions to study population will be applied to allow deriving expectations for effects of the interventions in cancer survivors from available source populations. Outcome measures will be inflammatory biomarkers clinically and physiologically relevant to cancer. The first reviewer will independently screen articles together with GPs and extract data that will be verified by a second reviewer. The quality of studies will be assessed using the Cochrane risk-of-bias tools. Depending on the clinical and methodological homogeneity of populations, interventions, and outcomes, a meta-analysis will be conducted using random-effects models. CONCLUSION: Findings will determine the effectiveness of H-BE interventions on inflammatory parameters, guide future directions for its provision in community-dwelling survivors of cancer and support GPs with safer anti-inflammatory treatment options in high-risk patients for clinical complications.
RESUMEN
Starch (S) films containing gellan gum (90:10) and polyester (P) blend films (PLA:PHBV, 75:25) with and without ferulic, p-coumaric or protocatechuic acid at 2% (w/w) were obtained by melt-blending and compression moulding for the purposes of obtaining SP bilayers by thermo-compressing both monolayers together. These were characterised as to their mechanical and barrier properties and as to their performance as packaging materials for pork meat slices. The incorporation of phenolic acids promoted the water vapour and oxygen barrier capacity of bilayers while reducing their stiffness and resistance to break, mainly in the case of protocatechuic acid. Phenolic acids significantly improved the antioxidant capacity of the bilayer films, reducing the lipid oxidation of packaged meat during storage. Phenolic acid loaded bilayers also reduced the microbial counts of meat, mainly for lactic acid bacteria. These effects positively affected the development of the sample pH and colour parameters throughout storage. Active starch-polyester bilayer films exhibited great potential as a means of extending the shelf-life and improving the quality preservation of pork meat.
Asunto(s)
Carne de Cerdo , Carne Roja , Animales , Embalaje de Alimentos , Hidroxibenzoatos , Carne/microbiología , Poliésteres/química , Almidón/química , PorcinosRESUMEN
In the present study, the effectiveness of a multilayer film of polylactide (PLA), fully bio-based and compostable, was ascertained to develop a novel sustainable packaging solution for the preservation of fresh pork meat. To this end, the multilayer PLA films were first characterized in terms of their thermal characteristics, structure, mechanical performance, permeance to water and aroma vapors and oxygen, and optical properties and, for the first time, compared with two commercial high-barrier multilayer packaging films. Thereafter, the multilayers were thermosealed to package fillets of fresh pork meat and the physicochemical changes, lipid oxidation levels, and microbiological counts were monitored in the food samples during storage under refrigeration conditions. Results showed that the meat fillets packaged in PLA developed a redder color and showed certain indications of dehydration and oxidation, being more noticeably after 11 days of storage, due to the higher water vapor and oxygen permeance values of the biopolymer multilayer. However, the pH changes and bacterial growth in the cold-stored fresh pork meat samples were minimal and very similar in the three tested multilayer films, successfully accomplishing the requirements of the food quality and safety standards at the end of storage.
RESUMEN
Films based on a 75:25 polylactic acid (PLA) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend, containing 2% (w/w) of different phenolic acids (ferulic, p-coumaric or protocatechuic acid), and plasticised with 15 wt. % polyethylene glycol (PEG 1000), were obtained by melt blending and compression moulding. The disintegration and biodegradation of the film under thermophilic composting conditions was studied throughout 35 and 45 days, respectively, in order to analyse the effect of the incorporation of the antimicrobial phenolic acids into the films. Sample mass loss, thermo-degradation behaviour and visual appearance were analysed at different times of the composting period. No effect of phenolic acids was observed on the film disintegration pattern, and the films were completely disintegrated at the end of the composting period. The biodegradation analysis through the CO2 measurements revealed that PLA-PHBV blend films without phenolic acids, and with ferulic acid, completely biodegraded after 20 composting days, while p-coumaric and protocatechuic slightly retarded full biodegradation (21 and 26 days, respectively). Phenolic acids mainly extended the induction period, especially protocatechuic acid. PLA-PHBV blend films with potential antimicrobial activity could be used to preserve fresh foodstuff susceptible to microbial spoilage, with their biodegradation under composting conditions being ensured.
RESUMEN
Adult cancer survivors have an increased prevalence of mental health comorbidities and other adverse late-effects interdependent with mental illness outcomes compared with the general population. Coronavirus Disease 2019 (COVID-19) heralds an era of renewed call for actions to identify sustainable modalities to facilitate the constructs of cancer survivorship care and health care delivery through physiological supportive domestic spaces. Building on the concept of therapeutic architecture, psychoneuroimmunology (PNI) indicators-with the central role in low-grade systemic inflammation-are associated with major psychiatric disorders and late effects of post-cancer treatment. Immune disturbances might mediate the effects of environmental determinants on behaviour and mental disorders. Whilst attention is paid to the non-objective measurements for examining the home environmental domains and mental health outcomes, little is gathered about the multidimensional effects on physiological responses. This exploratory review presents a first analysis of how addressing the PNI outcomes serves as a catalyst for therapeutic housing research. We argue the crucial component of housing in supporting the sustainable primary care and public health-based cancer survivorship care model, particularly in the psychopathology context. Ultimately, we illustrate a series of interventions aiming at how housing environmental attributes can trigger PNI profile changes and discuss the potential implications in the non-pharmacological treatment of cancer survivors and patients with mental morbidities.
Asunto(s)
COVID-19 , Supervivientes de Cáncer , Neoplasias , Adulto , Vivienda , Humanos , Salud Mental , Morbilidad , Neoplasias/epidemiología , Psiconeuroinmunología , SARS-CoV-2RESUMEN
The environmental problem generated by the massive consumption of plastics makes necessary the developing of biodegradable antimicrobial materials that can extend food shelf-life without having a negative impact on the environment. The current situation regarding the availability of biodegradable food packaging materials has been analysed, as well as different studies where antimicrobial compounds have been incorporated into the polymer matrix to control the growth of pathogenic or spoilage bacteria. Thus, the antimicrobial activity of active films based on different biodegradable polymers and antimicrobial compounds has been discussed. Likewise, relevant information on biodegradation studies carried out with different biopolymers in different environments (compost, soil, aquatic), and the effect of some antimicrobials on this behavior, are reviewed. In most of the studies, no relevant effect of the incorporated antimicrobials on the degradation of the polymer were observed, but some antimicrobials can delay the process. The changes in biodegradation pattern due to the presence of the antimicrobial are attributed to its influence on the microorganism population responsible for the process. More studies are required to know the specific influence of the antimicrobial compounds on the biodegradation behavior of polymers in different environments. No studies have been carried out or marine media to this end.