RESUMEN
Cinchona urea compounds having 3,5-diiodophenyl moieties were subjected to Yamamoto coupling polymerization to afford the chiral urea polymers. These polymers showed high activities as heterogeneous catalysts in asymmetric Michael reactions comparable with those of the corresponding monomeric catalyst in solution systems. Furthermore, the polymeric catalysts are easily recovered from their reaction mixtures due to their insolubility and can be reused several times without loss of catalytic activity.
RESUMEN
Resilin, an insect structural protein, has excellent flexibility, photocrosslinking properties, and temperature responsiveness. Recombinant resilin-like proteins (RLPs) can be fabricated into three-dimensional (3D) structures for use as cell culture substrates and highly elastic materials. A simplified, high-yielding production process for RLPs is required for their widespread application. This study proposes a simple production process combining extracellular expression using Brevibacillus choshinensis (B. choshinensis) and rapid column-free purification. Extracellular production was tested using four representative signal peptides; B. choshinensis was found to efficiently secrete Rec1, an RLP derived from Drosophila melanogaster, regardless of the type of signal peptide. However, it was suggested that Rec1 is altered by an increase in the pH of the culture medium associated with prolonged incubation. Production in a jar fermentor with controllable pH yielded 530 mg Rec1 per liter of culture medium, which is superior to productivity using other hosts. The secreted Rec1 was purified from the culture supernatant via (NH4 )2 SO4 and ethanol precipitations, and the purified Rec1 was applied to ring-shaped 3D hydrogels. These results indicate that the combination of secretory production using B. choshinensis and column-free purification can accelerate the further application of RLPs.
Asunto(s)
Brevibacillus , Animales , Brevibacillus/genética , Brevibacillus/metabolismo , Drosophila melanogaster/metabolismo , Hidrogeles , Proteínas de Insectos/genética , Proteínas Recombinantes , Medios de Cultivo/metabolismoRESUMEN
The proposed continuous folding structure units are fundamental to analyze protein structure. Here, we could elucidate for the first time two types of hydrophobic core networks in apomyoglobin using continuous folding structure units. In myoglobin, two autonomous sequences emerged clearly. We could thus characterize the autonomous sequences using well-defined hydrophobic core networks within respective semifolds. A hydrophobic core is defined as a pair of topology-local hydrophobic amino acids in different folding structures. Hydrophobic core formation is indispensable to stabilize the different folding structures via an efficient hydrophobic interaction. Autonomous sequences in myoglobin encode tertiary structure information for semifolds. These sequences fold autonomously into small sets of continuous folding structure units to grow separate semifolds on each separate framework. The autonomous sequence can be defined as the local sequence assigned to the small set of continuous folding structure units. They create the discrete hydrophobic region in a semifold by assembly of their hydrophobic regions. Semifolds were characterized by discrete hydrophobic regions stabilized by respective type I hydrophobic core networks, which were present within each semifold. The discrete hydrophobic region of a semifold propagated itself with that of a different semifold by hydrophobic interactions in type II hydrophobic core network, which was present between different semifolds, as observed by the X-ray structures of semifolds. The most significant feature of semifolds in apomyoglobin was that they could be verified by the X-ray structure of holomyoglobin regardless of the instability of folds characteristic to autonomous sequence fragments. This work presents the first description of autonomous sequences.
RESUMEN
In this study, we examined the polymerization performance of methyl methacrylate (MMA) initiated with partially oxidized tri-nbutylborane (TBBO) compared to that initiated with benzoyl peroxide and aromatic tertiary amine (BPO/amine) system. In the bulk polymerization of MMA at 37°C, conversion initiated with TBBO after 3 h was nearly quantitative, whereas the conversion with the BPO/amine system was low (~20%). The number-averaged and weight-averaged molecular weight of the TBBO-initiated polymer was more than twice as high as that of the BPO/amine-initiated polymer. Electron spin resonance (ESR) analysis of MMA polymerization indicated that the TBBO-initiated system maintained its radical intensities for a longer period than the BPO/amine-initiated system. Furthermore, the radical fragments in the TBBO-initiated PMMA after 72 h were still active as a polymerization initiator for MMA. These findings suggest that the polymerization mechanism of MMA initiated by TBBO functions as a living-like polymerization initiator.
Asunto(s)
Peróxido de Benzoílo , Metilmetacrilatos , Aminas , Compuestos de Boro , Metacrilatos , Metilmetacrilato , PolimerizacionRESUMEN
We have synthesized novel chiral polymers containing a cinchona-based squaramide in the main chain. We designed a novel cinchona squaramide dimer that contains two cinchona squaramide units connected by diamines. The olefinic double bonds in the cinchona squaramide dimer were used for Mizoroki-Heck (MH) polymerization with aromatic diiodides. The MH polymerization of the cinchona squaramide dimer and aromatic diiodide proceeded well to give the corresponding chiral polymers in good yields. The catalytic activity of the chiral polymers was investigated for asymmetric Michael addition reactions. The effect of the squaramide structure of the polymeric catalyst on the catalytic performance is discussed in detail. We have surveyed the influence of the chiral polymer structure on the catalytic activity and enantioselectivity of the asymmetric reaction. The asymmetric Michael addition of ß-ketoesters to nitroolefins was successfully catalyzed by polymeric cinchona squaramide organocatalysts to obtain the corresponding Michael adducts in good yields with excellent enantio- and diastereoselectivities. The polymeric catalysts were insoluble in commonly used organic solvents and easily recovered from the reaction mixture and reused several times without the loss of catalytic activity.
RESUMEN
Simulation of the monooxygenation function of flavoenzyme (Fl-Enz) has been long-studied with N5-modified cationic flavins (FlEt+ ), but never with N5-unmodified neutral flavins (Fl) despite the fact that Fl is genuinely equal to the active center of Fl-Enz. This is because of the greater lability of 4a-hydroperoxy adduct of Fl, FlOOH , compared to those of FlEt+ , FlEtOOH , and Fl-Enz, FlOOH-Enz. In this study, Fl incorporated into a short peptide, flavopeptide (Fl-Pep), was designed by a rational top-down approach using a computational method, which could stabilize the corresponding 4a-hydroperoxy adduct (FlOOH-Pep) through intramolecular hydrogen bonds. We report catalytic chemoselective sulfoxidation as well as Baeyer-Villiger oxidation by means of Fl-Pep under light-shielding and aerobic conditions, which are the first Fl-Enz-mimetic aerobic oxygenation reactions catalyzed by Fl under non-enzymatic conditions.
RESUMEN
To the best of our knowledge, this is the first study that shows that the X-ray structures of proteins can be dissected into their continuous folding structure units. Each folding structure unit was designed such that both the terminal di- or tri-peptide sequences shared common sequences with the two adjacent folding structure units. To encode the folding structure information of proteins into their amino acid sequences, we proposed 44 kinds of folding elements, which covered all of the amino acids in the protein chains, and defined all folding structure units. The folding element was defined to mean a minimum structural piece, which covered the frame of the main chain of each amino acid in a protein chain. A folding structure unit of a local sequence could be fully characterized by the sequential combination of individual folding elements assigned to each amino acid. The folding structure information showed amino acid preferences in various positions in folding structure units. Folding structure formation proceeded on the basis of probability theory. Strikingly, relative formation ability analysis clearly indicated that we can decode the types and the chain length of folding structure units from the amino acid sequence of a protein.
RESUMEN
Main-chain chiral quaternary ammonium polymers were successfully synthesized by the quaternization polymerization of cinchonidine dimer with dihalides. The polymerization occurred smoothly under optimized conditions to give novel type of main-chain chiral quaternary ammonium polymers. The catalytic activity of the polymeric chiral organocatalysts was investigated on the asymmetric benzylation of N-(diphenylmethylidene)glycine tert-butyl ester.
Asunto(s)
Polímeros/síntesis química , Compuestos de Amonio Cuaternario/síntesis química , Catálisis , Alcaloides de Cinchona/síntesis química , Polimerizacion , Compuestos de Amonio Cuaternario/química , Estereoisomerismo , Compuestos de Sulfhidrilo/síntesis químicaRESUMEN
Repeated reaction between a chiral quaternary ammonium dimer and disodium disulfonate gave a chiral ionic polymer, which showed excellent catalytic activity in the asymmetric benzylation of N-diphenylmethylene glycine tert-butyl ester.
RESUMEN
Main-chain polymers of chiral imidazolidinone were successfully synthesized by reaction of chiral imidazolidinone dimers with disulfonic acid. Chiral imidazolidinones were incorporated into the main-chain of the polymer by ionic bonding. These polymers could be used as polymeric chiral organocatalysts for asymmetric Diels-Alder reactions.
Asunto(s)
Diseño de Fármacos , Imidazolidinas/química , Polímeros/química , Catálisis , Polímeros/síntesis química , Estereoisomerismo , Ácidos Sulfónicos/químicaRESUMEN
A condensation reaction between quaternary ammonium halide and sulfonate was first successfully applied to the synthesis of the chiral polymers. Reaction of bis(quaternary ammonium halide) with disulfonate afforded a polymer containing ionic bonds in its main chain. The chiral ionic polymers were applied to the asymmetric benzylation of N-diphenylmethylidene glycine tert-butyl ester to prepare (S)-phenylalanine derivatives in high yield with a high level of enantioselectivity.
Asunto(s)
Polímeros/síntesis química , Compuestos de Amonio Cuaternario/síntesis química , Ácidos Sulfónicos/síntesis química , Catálisis , Iones/química , Estructura Molecular , Polímeros/química , Compuestos de Amonio Cuaternario/química , Estereoisomerismo , Ácidos Sulfónicos/químicaRESUMEN
Porous metallic materials can have a low Young's modulus, which is approximately equal to that of human bone, by controlling the porosity. On the other hand, certain medical polymers exhibit biofunctionalities that are not intrinsically present in metallic materials. Therefore, a composite consisting of these materials is expected to possess both these advantages for biomedical applications. However, in the case of using porous metallic materials, the deterioration of mechanical properties should of concern because a stress concentration may be induced near the pores. In this study, for the fabrication of the abovementioned composite, a versatile process for filling a medical polymer into a porous metallic material has been developed using porous pure titanium (pTi) and polymethylmethacrylate (PMMA). Then, the tensile strength and Young's modulus of pTi filled with PMMA (pTi/PMMA) fabricated using this process are systematically investigated. The tensile strength of pTi can be improved by the PMMA filling. Particularly, the improvement in the tensile strength of pTi pretreated using a silane coupling agent before PMMA filling is greater than that of the non-pretreated pTi because the stress concentration near the pores may be reduced by the improvement in the interfacial adhesiveness between the titanium particles and the PMMA. In contrast, the effect of the PMMA filling on the Young's modulus of pTi is smaller than that on the tensile strength because the Young's modulus of PMMA is considerably lower than that of pTi. Further, tensile strengths and Young's moduli comparable to the tensile strength and Young's modulus of the human bone are successfully obtained in the case of some pTi/PMMA samples.
Asunto(s)
Materiales Biocompatibles/química , Polímeros/química , Polimetil Metacrilato/química , Porosidad , Titanio/química , Aire , Módulo de Elasticidad , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Temperatura , Resistencia a la Tracción , Factores de Tiempo , Agua/químicaRESUMEN
The asymmetric transfer hydrogenation of imines was performed with the use of a polymer-immobilized chiral catalyst. The chiral catalyst, prepared from crosslinked polystyrene-immobilized chiral 1,2-diamine monosulfonamide, was effective in the asymmetric transfer hydrogenation of N-benzyl imines in CH(2)Cl(2) to give a chiral amine in high yield and good enantioselectivity. Furthermore, an amphiphilic polymeric catalyst prepared from crosslinked polystyrene containing sulfonated groups successfully catalyzed the asymmetric transfer hydrogenation of cyclic imines in water. Enantioenriched secondary amines with up to 94% ee were obtained by using a polymeric catalyst.
Asunto(s)
Química/métodos , Hidrógeno/química , Iminas/química , Catálisis , Reactivos de Enlaces Cruzados/química , Ligandos , Espectroscopía de Resonancia Magnética , Metales , Modelos Químicos , Polímeros/química , Poliestirenos/química , Rutenio/química , Solventes/química , Estereoisomerismo , Agua/químicaRESUMEN
Asymmetric hydrogenation of alpha-(N-benzoyl-N-methylamino)propiophenone through dynamic kinetic resolution was performed by using a polymer-immobilized chiral diamine-ruthenium-BINAP-t-BuOK system in order to yield syn-beta-amide alcohol exclusively with nearly perfect enantioselectivity.
Asunto(s)
Polímeros/química , Propiofenonas/química , Catálisis , Diaminas/química , Hidrogenación , Cinética , Ligandos , EstereoisomerismoRESUMEN
A novel synthetic method for poly(L-lactide) (PLLA)-based diblock copolymers was developed by the use of PLLA extended chain crystallites (or crystalline residues) as a solid-state macro-coinitiator. In this study, we showed one example, i.e., a synthesis of diblock copolymer composed of a crystalline PLLA chain and an amorphous poly(DL-lactide) chain by ring-opening polymerization of DL-lactide initiated with stannous octoate (i.e., tin(II) 2-ethylhexanoate) in the presence of PLLA extended chain crystallites. The PLLA extended chain crystallites were prepared by hydrolytic degradation of crystallized PLLA films at 97 degrees C for 70 h. The chains inside the extended chain crystallites are expected to be protected from transesterfication reaction. Gel permeation chromatography, polarimetry, 1H NMR spectroscopy, wide-angle X-ray scattering, and differential scanning calorimetry revealed that the diblock copolymer poly(L-lactide-block-DL-lactide) was successfully prepared without significant transesterification.
Asunto(s)
Cristalización/métodos , Poliésteres/síntesis química , Rastreo Diferencial de Calorimetría , Cromatografía en Gel , Espectroscopía de Resonancia Magnética , Difracción de Rayos XRESUMEN
Highly efficient, selective and recyclable palladium catalyst systems for hydroesterification of styrene and vinyl acetate were realized by using 1,2-bis(di-tert-butylphosphinomethyl)benzene as ligand and polymeric sulfonic acids of limited SO(3)H loadings as promoter.
RESUMEN
Cross-linked polystyrenes (2, 8, and 11) possessing pendant double bonds conjugated with benzene ring were prepared by both polymerization method and chemical modification of pre-formed polymers. These double bonds were readily lithiated with n-butyllithium to give the benzyllithium species on the polymer. The polymer supported benzylic anions (3 and 12) are a versatile polymeric organometallic reagent that reacted with various kinds of electrophiles.