Oxidative potential of the inhalation bioaccessible fraction of PM10 and bioaccessible concentrations of polycyclic aromatic hydrocarbons and metal(oid)s in PM10.

Atmospheric particulate matter (PM) has been related to numerous adverse health effects in humans. Nowadays, it is believed that one of the possible mechanisms of toxicity could be the oxidative stress, which involves the development of reactive oxygen species (ROS). Different assays have been proposed to characterize oxidative stress, such as dithiothreitol (DTT) and ascorbic acid (AA) acellular assays (OPDTT and OPAA), as a metric more relevant than PM mass measurement for PM toxicity. This study evaluates the OP of the bioaccessible fraction of 65 PM10 samples collected at an Atlantic Coastal European urban site using DTT and AA assays. A physiologically based extraction (PBET) using Gamble's solution (GS) as a simulated lung fluid (SLF) was used for the assessment of the bioaccessible fraction of PM10. The use of the bioaccessible fraction, instead of the fraction assessed using conventional phosphate buffer and ultrasounds assisted extraction (UAE), was compared for OP assessment. Correlations between OPDTT and OPAA, as well as total and bioaccessible concentrations of polycyclic aromatic hydrocarbons (PAHs) and metal(oid)s, were investigated to explore the association between those compounds and OP. A correlation was found between both OP (OPDTT and OPAA) and total and bioaccessible concentrations of PAHs and several metal(oid)s such as As, Bi, Cd, Cu, Ni, and V. Additionally, OPDTT was found to be related to the level of K+.

A green approach for the automatic quantitative analysis of additives in plastic samples using in-tube extraction dynamic headspace sampling technique coupled to GC-MS/MS.

BACKGROUND: Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples. The proposed method consists of in-tube extraction dynamic headspace sampling (ITEX-DHS) combined with gas chromatography (GC) and mass spectrometry (MS/MS) determination. RESULTS: Several parameters affecting the ITEX-DHS extraction of 47 additives in plastic samples (including phthalates, bisphenols, adipates, citrates, benzophenones, organophosphorus compounds, among others) were optimised. The use of matrix-matched calibration, together with labelled surrogate standards, minimises matrix effects, resulting in recoveries between 70 and 128%, with good quantitation limits (below 0.1 µg g-1 for most compounds) and precision (<20%). The method proposed can be applied to any type of polymer, but due to the existence of the matrix effect, calibrates with the adequate matrix should be performed for each polymer. SIGNIFICANCE: This method represents an effective improvement compared to previous methods because it is fast, solvent-free, fully automated, and provides reliable quantification of additives in plastic samples.

A reliable method to determine airborne microplastics using quantum cascade laser infrared spectrometry.

The number of studies dealing with airborne microplastics (MPs) is increasing but sampling and sample treatment are not standardized, yet. Here, a fast and reliable method to characterize MPs is presented. It involves the study of two passive sampling devices to collect atmospheric bulk deposition (wet and dry deposition) and three digestion methods (two alkaline-oxidative and an oxidative) to treat the samples. The alkaline-oxidative method based on KOH and NaClO was selected for a mild organic matrix digestion. In addition, some operational parameters of a high-throughput quantum cascade laser-based infrared device (LDIR) were optimized: an effective automatic tiered approach to differentiate fibres from particles (>90 % success in validation) and a criterion to establish positive matches when comparing an unknown spectrum against the spectral database (proposed match index > 0.85). The procedural analytical recoveries were very good for particles (82-90 %) and slightly lower for fibres (62-73 %). Finally, the amount and type of MPs deposited at a sub-urban area NW Spain were evaluated. Most common polymers were Polyethylene (PE), Polypropylene (PP) and Polyethylene terephthalate (PET). The deposition rates ranged 98-1220 MP/m2/day, ca. 1.7 % of the total collected particles. More than 50 % of the total MPs deposited were in the 20-50 µm size range, whereas fibres were mostly in the 50-500 µm size range.

A multi-residue method for the analysis of organic pollutants released from atmospheric PM2.5 in simulated biological fluids: Inhalation bioaccessibility and bioavailability estimation.

BACKGROUND: In recent decades, there has been a growing interest within the scientific community regarding the study of the fraction that could be released in simulated biological fluids to estimate in vitro bioaccessibility and bioavailability of compounds. Concerning particulate matter (PM), studies were essentially focused on metal (oid)s probably due to more complex methodologies needed for organic compounds, requiring extraction and pre-concentration steps from simulated fluids, followed by chromatographic analysis. Thus, the development of a simple and sensitive methodology for the analysis of multi-class organic compounds released in different inhalation simulated fluids would represent a great contribution to the field. RESULTS: In this work, a methodology for the analysis of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols released in simulated fluids from PM2.5 samples was developed. After a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) and a simulated body fluid (SBF, filling a dialysis membrane) to obtain in vitro inhalation bioaccessible and bioavailable fractions, respectively; compounds were determined by a vortex-assisted liquid-liquid extraction (VALLE) and a subsequent analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). Experimental conditions concerning VALLE extraction (extraction time and amount of NaCl (g)) were optimized by using a central composite design (CCD), best MS/MS transitions were selected and matrix-matched calibration combined with use of labelled subrogate standards provided high sensitivity, minimization of matrix effects and recovering losses compensation. SIGNIFICANCE: The successful validation results obtained for most of the compounds demonstrated the effectiveness of the proposed methodology for the analysis of multi-class organic pollutants released in ALF and SBF for inhalation bioaccessibility and bioavailability assessment, respectively. Furthermore, applicability of the method was proved by analysing 20 p.m.2.5 samples, being the proposed in vitro PBET dialyzability approach for assessing organic pollutant's inhalation bioavailability applied to PM2.5 samples for the first time.

Organotin compounds in seafood by ultrasonic assisted extraction and gas chromatography-triple quadrupole tandem mass spectrometry.

Although restricting environmental quality values for organotin compounds (OTs) are set by Directive 2013/39/EU of the European Parliament, marine environment remains being affected due to maritime circulation at global scale. Fish and seafood accumulate OTs, making fish and seafood consumption the main source of OTs in humans. Because of the fish and seafood matrices complexity and the required low limits of detection, a robust and fast procedure for the quantification of OTs in fish and seafood, using ultrasound-assisted extraction and gas chromatography-tandem mass spectrometry, was validated and applied. Detection (2.7 µg Sn kg-1) and quantification (8.0 µg Sn kg-1) limits, repeatability and intermediate precision (<10%), accuracy by analysing ERM®-CE477 Mussel Tissue and analytical recoveries (65-122%) were assessed. Multivariate analysis shown that the matrix effect for some OTs displayed good negative correlation with the fat and protein content. Health risk assessment of OTs intake revealed no serious risk for human consumption.

Source apportionment of PM10 and health risk assessment related in a narrow tropical valley. Study case: Metropolitan area of Aburrá Valley (Colombia).

This study investigates spatio-temporal variations of PM10 mass concentrations and associated metal(oid)s, δ13C carbon isotope ratios, polycyclic aromatic hydrocarbons (PAHs), total organic carbon (TOC) and equivalent black carbon (eBC) concentrations over a half year period (from March 2017 to October 2017) in two residential areas of Medellín (MED-1 and MED-2) and Itagüí municipality (ITA-1 and ITA-2) at a tropical narrow valley (Aburrá Valley, Colombia), where few data are available. A total of 104 samples were analysed by using validated analytical methodologies, providing valuable data for PM10 chemical characterisation. Metal(oid)s concentrations were measured by inductively coupled plasma mass spectrometry (ICP-MS) after acid digestion, and PAHs concentrations were measured by Gas Chromatography-Mass Spectrometry (GC-MS) after Pressurised Hot Water Extraction (PHWE) and Membrane Assisted Solvent Extraction (MASE). Mean PM10 mass concentration ranged from 37.0 µg m-3 to 45.7 µg m-3 in ITA-2 and MED-2 sites, respectively. Al, Ca, Mg and Na (from 6249 ng m-3 for Mg at MED-1 site to 10,506 ng m-3 for Ca at MED-2 site) were the major elements in PM10 samples, whilst As, Be, Bi, Co, Cs, Li, Ni, Sb, Se, Tl and V were found at trace levels (< 5.4 ng m-3). Benzo[g,h,i] perylene (BghiP), benzo[b + j]fluoranthene (BbjF) and indene(1,2,3-c,d)pyrene (IcdP) were the most profuse PAHs in PM10 samples, with average concentrations of 0.82-0.86, 0.60-0.78 and 0.47-0.58 ng m-3, respectively. Results observed in the four sampling sites showed a similar dispersion pattern of pollutants, with temporal fluctuations which seems to be associated to the meteorology of the valley. A PM source apportionment study were carried out by using the positive matrix factorization (PMF) model, pointing to re-suspended dust, combustion processes, quarry activity and secondary aerosols as PM10 sources in the study area. Among them, combustion was the major PM10 contribution (accounting from 32.1 to 32.9% in ITA-1 and ITA-2, respectively), followed by secondary aerosols (accounting for 13.2% and 23.3% ITA-1 and MED-1, respectively). Finally, a moderate carcinogenic risk was observed for PM10-bound PAHs exposure via inhalation, whereas significant carcinogenic risk was estimated for carcinogenic metal(oid)s exposure in the area during the sampling period.

In-vitro inhalation bioavailability estimation of Metal(oid)s in atmospheric particulate matter (PM2.5) using simulated alveolar lysosomal fluid: A dialyzability approach.

A novel in-vitro method, by using synthetic body fluids, human physiological conditions and a simulated air-blood barrier (by using a dialysis membrane) has been developed and applied to assess in-vitro inhalation bioavailability of metal(oid)s associated to particulate matter (PM2,5) samples collected from an industrial site of the Northwest of Spain. A validated analytical methodology based on inductively coupled plasma mass spectrometry (ICP-MS) was used to analyse metal(oid)s concentrations in bioavailable fractions. This approach would be a more realistic human health risk assessment since considering processes that occur in human body in contrast the overestimation derived from current models (which consider environmental concentrations). Metal(oid)s such as Cu and Mo seemed to be the most bioavailable (mean in-vitro bioavailability ratios higher than 70%); Ba, Cd, Mn, Pb, Rb, Sb, Sn, V and Zn shown mean ratios between 20 and 60%, while low in-vitro bioavailability ratios (less than 20%) were observed for metal(oid)s such as Al, Co, Cr, Fe, Ni, Ti, and Tl. Health risk assessment via inhalation based on hazard carcinogenic and non-carcinogenic indexes (HIc and HInc, respectively) were performed considering three exposure scenarios using both inhalation bioavailable and total metal(oid)s concentrations in PM2.5 samples, suggesting no risk to human health. The influence of chemical composition on in-vitro bioavailability ratios was obtained, pointing out that inhalation ratios of Al, Ba, Cr, Cu, Fe, Ni, Pb and V seem to be affected by sea salt and/or crustal and/or biogenic and/or anthropogenic content of PM2.5.

Development of an analytical procedure to analyze microplastics in edible macroalgae using an enzymatic-oxidative digestion.

Besides being food and a refuge to marine species, macroalgae are a powerful and renewable economic resource. However, they may introduce microplastics (MPs) in the trophic chain. We developed a reliable analytical method to characterize and quantify MPs in common and edible macroalgae. Several digestion methods and filters, along with various measurement options, were studied. A new enzymatic-oxidative protocol with a unique final filtration was selected and validated with a mixture of 5 commercial macroalgae (Undaria pinnatifida spp, Porphyra spp, Ulva spp, Laminaria ochroleuca and Himanthalia elongate). Further, it was shown that washing the macroalgae to release MPs is suboptimal and the potential adhesion of MPs to macroalgae was evaluated. A filter subsampling strategy that scans 33.64 % of its surface reduced the time required to characterize <70 µm particles and fibres directly on the 47 mm diameter filter using an IR microscope (1 sample/day).

Multi-class organic pollutants in atmospheric particulate matter (PM2.5) from a Southwestern Europe industrial area: Levels, sources and human health risk.

The occurrence of 50 multi-class pollutants comprising 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 12 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols was studied in atmospheric particulate matter (PM2.5) samples collected at an industrial area focused on automotive manufacturing located at the Southwestern Atlantic European region (Vigo city, Spain) during 1-year period. Among all quantitated pollutants in PM2.5 samples, bisphenol A (BPA) was the most predominant with an average concentration of 6180 pg m-3, followed by PAHs comprising benzo(b+j)fluoranthene (BbF + BjF) and benzo(g,h,i)perylene (BghiP), accounting for 546 pg m-3 and 413 pg m-3 respectively. In addition, two OPFRs concerning tris(chloropropyl) phosphate (TCPP) and triphenyl phosphine oxide (TPPO) were the next following the concentration order, accounting for 411 pg m-3 and 367 pg m-3 respectively; being butyl benzyl phthalate (BBP) the most profuse PAE (56.1 pg m-3 by average). High relative standard deviations (RSDs) were observed during the whole sampling period, while statistically significant differences were only observed for PAHs concentrations during cold and warm seasons. Furthermore, some water-soluble ions and metal(oid)s were analysed in PM2.5 samples to be used as PM source tracers, whose concentrations were quite below the target levels set in the current legislation. Data obtained from principal component analysis (PCA) and PAHs molecular indices suggested a pyrogenic and petrogenic origin for PAHs, whereas occurrence of the remaining compounds seems to be attributed to resources used in the automotive industrial activity settled in the sampling area. Moreover, although a substantial anthropogenic source to PM2.5 in the area was observed, marine and soil resuspension contributions were also accounted. Finally, carcinogenic and non-carcinogenic risks posed by PM2.5-bound pollutants inhalation were assessed, being both averages within the safe level considering the whole period.

Weathering-independent differentiation of microplastic polymers by reflectance IR spectrometry and pattern recognition.

The presence and effects of microplastics in the environment is being continuously studied, so the need for a reliable approach to ascertain the polymer/s constituting them has increased. To characterize them, infrared (IR) spectrometry is commonly applied, either reflectance or attenuated total reflectance (ATR). A common problem when considering field samples is their weathering and biofouling, which modify their spectra. Hence, relying on spectral matching between the unknown spectrum and spectral databases is largely defective. In this paper, the use of IR spectra combined with pattern recognition techniques (principal components analysis, classification and regression trees and support vector classification) is explored first time to identify a collection of typical polymers regardless of their ageing. Results show that it is possible to identify them using a reduced suite of spectral wavenumbers with coherent chemical meaning. The models were validated using two datasets containing artificially weathered polymers and field samples.

Adsorption of pesticides and personal care products on pristine and weathered microplastics in the marine environment. Comparison between bio-based and conventional plastics.

The hydrophobicity of persistent organic pollutants (POPs) makes them adsorb on microplastics in the marine environment, affecting their distribution, persistence, or their transfer to the trophic chain. Fragrances and non-polar pesticides can be adsorbed by microplastics in the marine environment because of their physico-chemical characteristics. In this work, the adsorption of two pesticides (α-endosulfan and chlorpyrifos) and 6 musk fragrances (musk xylene, musk ketone, musk moskene, galaxolide, tonalide, and celestolide) on polyamide (PA6) (a petroleum based polymer) and on polyhydroxybutyrate (PHB) (biopolymer) in seawater was studied, considering also the effect of water temperature and plastic weathering. Results show higher adsorption of the selected pollutants for PHB than PA, being PA more affected by the water temperature and the plastic weathering. The highest percentage of adsorption was achieved in most cases at 24 h. In addition, this process was irreversible, as it showed the leaching assays. Besides, this work revealed that plastics mitigate the degradation of α-endosulfan in aquatic media (hydrolysis), showing that plastics can act as inhibitors of degradation of POPs, increasing its persistence in the environment.

Inhalation bioaccessibility of multi-class organic pollutants associated to atmospheric PM2.5: Correlation with PM2.5 properties and health risk assessment.

Inhalation exposure to fine particulate matter (PM2.5) represents a global concern due to the adverse effects in human health. In the last years, scientific community has been adopted the assessment of the PM2.5-bound pollutant fraction that could be released (bioaccessible fraction) in simulated lung fluids (SLFs) to achieve a better understanding of PM risk assessment and toxicological studies. Thus, bioaccessibility of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols in PM2.5 samples was evaluated. The proposed method consists of a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) to obtain bioaccessible fractions, followed by a vortex-assisted liquid-liquid microextraction (VALLME) and a final analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). The highest inhalation bioaccessibility ratio was found for bisphenol A (BPA) with an average of 83%, followed by OPFRs, PAEs and PAHs (with average bioaccessibilities of 68%, 41% and 34%, respectively). Correlations between PM2.5 composition (major ions, trace metals, equivalent black carbon (eBC) and UV-absorbing particulate matter (UVPM)) and bioaccessibility ratios were also assessed. Principal Component Analysis (PCA) suggested that PAHs, PAES and OPFRs bioaccessibility ratios could be positively correlated with PM2.5 carbonaceous content. Furthermore, both inverse and positive correlations on PAHs, PAEs and OPFRs bioaccessibilites could be accounted for some major ions and metal (oid)s associated to PM2.5, whereas no correlations comprising considered PM2.5 major ions and metal (oid)s contents and BPA bioaccessibility was observed. In addition, health risk assessment of target PM2.5-associated PAHs via inhalation was assessed in the study area considering both total and bioaccessible concentrations, being averaged human health risks within the safe carcinogenic and non-carcinogenic levels.

A reliable method for the isolation and characterization of microplastics in fish gastrointestinal tracts using an infrared tunable quantum cascade laser system.

Societal and environmental concern due to frequent reports of microplastics in fish stomachs raised as they may accumulate along the trophic chain. The request for analysing microplastics in fish stresses two major analytical issues: sample treatment and final characterization. The, so far, workhorse for chemical characterization is infrared spectroscopy which is time-consuming. Here, a quantum cascade laser-based device is used to accelerate the characterization stage. Its novelty poses new challenges for sample processing and particle handling because the unknown particles must be transferred to a reflective slide. In this study, three sample digestion protocols (alkaline-oxidative with H2O2, and alkaline-oxidative with NaClO and enzymatic-oxidative) and three different procedures to transfer the filter cake to reflective slides are compared. A simplified enzymatic-oxidative digestion (validated through an interlaboratory exercise) combined with a Syncore® automatic evaporation system and a Laser Direct Infrared Imaging (LDIR) device is proposed first time as a reliable and relatively fast method to treat gastrointestinal tracts of fish. Analytical recoveries were studied using samples of Scomber scombrus and they were ca. 100% for big -i.e., >500 µm- and ca. 90% for medium -i.e., 200-300 µm- particles and ca. 75% for 10 µm thick fibres.

Monitorization of polyamide microplastics weathering using attenuated total reflectance and microreflectance infrared spectrometry.

The EU goal to reduce marine plastic litter by ca. 30% by 2020 stressed the need to deploy analytical methods to ascertain the polymeric nature of a residue. Furthermore, as plastics age under natural conditions and usual databases do not include their weathered spectra, (micro)plastics in environmental samples may be unidentified. In this paper, polyamide (nylon) microplastics weathering was monitored because of its ubiquity in household commodities, clothes, fishery items and industry, whose residues end up frequently in the environment. Infrared spectra (ATR and microreflectance) and Scanning Electron Microscopy (SEM) images were collected periodically while exposing nylon to controlled weathering. It was seen that ATR was more sensitive than microreflectance to monitor the structural evolution of polyamide and that the spectra and the surface of weathered microplastics showed remarkable differences with the pristine material, which stresses the need for considering its evolution when identifying microplastics in environmental studies. The evolution of six band ratios related to the chemical evolution of this polymer are presented. SEM images revealed the formation of secondary microplastics at the most advanced weathering stages of polyamide.

Phthalates, organotin compounds and per-polyfluoroalkyl substances in semiconfined areas of the Spanish coast: Occurrence, sources and risk assessment.

In this work two sensitive areas of the Spanish coast located in the Atlantic (Ria de Vigo) and Mediterranean (Mar Menor lagoon) have been studied regarding their contamination by phthalates, organotin compounds and per-polyfluoroalkyl substances (seawater and sediments) in two different campaigns (spring and autumn in 2015). PFAS and OTCs were detected in seawater and sediments at low concentrations (few ng L-1 or ng g-1), whereas PAEs were detected at levels two orders of magnitude higher, particularly in Mar Menor lagoon due to its semi-confined characteristics. However, PAEs and OTCs concentration in sediments were higher in Ría de Vigo than in Mar Menor lagoon as a consequence of the influence of the important urban nuclei and port in that area. The ecological risk assessment revealed that in both areas tributyltin, dibutyltin and diethylphthalate pose a significant risk in sediments, whereas in seawater tributyltin in both areas resulted in a high risk.

Development of a fast and efficient method to analyze microplastics in planktonic samples.

Microplastics (MPs) affect plankton (a basis of the trophic chain) and planktivorous fish can ingest them through food confusion or by trophic transmission. Consensus to determine MPs in plankton is lacking and, so, three digestion treatments were evaluated: Alkaline (potassium hydroxide) and enzymatic (protease plus lipase) digestions, both combined with a hydrogen peroxide stage; and an oxidative method using a surfactant (sodium dodecyl sulfate) plus hydrogen peroxide. The alkaline method using potassium hydroxide was found to damage polystyrene. MPs were identified with a stereomicroscope and characterized by reflectance infrared microscopy in semi-automatic mode (using dedicated multi-well aluminium plates). Analytical recoveries for polypropylene, polystyrene, polyethylene, polyamide, polyvinyl chloride and polyethylene terephthalate were higher than 75%, 82% and 83% for the alkaline, enzymatic and oxidative treatments, respectively. The enzymatic method was successfully validated in a European interlaboratory exercise and the oxidative method was demonstrated to be a reliable, fast and cheaper alternative.

Inhalation bioaccessibility estimation of polycyclic aromatic hydrocarbons from atmospheric particulate matter (PM10): Influence of PM10 composition and health risk assessment.

Polycyclic aromatic hydrocarbons (PAHs) inhalation bioaccessibility was assessed in 65 atmospheric particulate matter samples (PM10) collected at an Atlantic coastal European urban site. The proposed method consists on a physiologically based extraction (PBET) by using Gamble's solution followed by a vortex assisted liquid-liquid micro-extraction (VALLME) and quantification by high performance liquid chromatography with fluorescence detection (HPLC-FLD). The use of a micro-extraction technique combined with FLD detection, provides a simple, fast, sensitive, accurate and low-cost methodology to PAHs quantification in bioaccessible fractions. Accuracy of the bioaccessibility study was assessed by means of a mass balance approaches using a PM10 filter and a certified reference material (ERM-CZ100). High-moderate inhalation bioaccessibilities were found for phenanthrene (Phe), fluoranthene (Ft) and pyrene (Pyr) (average ratios in the 52-65% range); while dibenz (a,h)anthracene (DBahA), indeno (1,2,3-cd)pyrene (IP) and benzo (g,h,i)perylene (BghiP) were observed to be less bioaccessibles (average ratios in the 11-14% range). Relationship between PM10 composition (major ions, trace metals, equivalent black carbon (eBC) and UV-absorbing particulate matter (UVPM)) and PAHs bioaccessibility ratios was also assessed. Principal Component Analysis (PCA) showed that PAHs bioaccessibility percentage is dependent on anthropogenic (eBC, UVPM and Sb concentrations) and marine sources of PM10. Predicted PAHs bioaccessibilities after applying a multiple linear regression model based on marine and anthropogenic source of PM10 could also be established. Health risk assessment of target PM10-associated PAHs via inhalation was assessed considering bioaccessibility concentrations by using hazard index (HI) and BaP equivalent concentration (BaPeq) approaches, suggesting no carcinogenic risk in the area during the sampling campaign.

The occurrence and distribution of polycyclic aromatic hydrocarbons, bisphenol A and organophosphate flame retardants in indoor dust and soils from public open spaces: Implications for human exposure.

Global concern exists regarding human exposure to organic pollutants derived from public open spaces and indoor dust. This study has evaluated the occurrence of 18 polycyclic aromatic hydrocarbons (PAHs), 11 organophosphorus flame retardants (OPFRs) and bisphenol A (BPA). To achieve this, a new simple, efficient and fast multi-residue analytical method based on a fully automated pressurised liquid extraction (PLE) and subsequent quantification by gas chromatography coupled to electron ionization-mass spectrometry (GC-EI-MS) in selected ion monitoring (SIM) mode was developed. The developed method was applied to indoor dust (12 sampling households) and soil derived from two public open spaces (POSs). Among all compounds studied, PAHs were the most ubiquitous contaminants detected in POS soils and indoor dust although some OPFRs and BPA were detected in lower concentrations. An assessment of the incremental lifetime cancer risk (ILCR) was done and indicated a high potential cancer risk from the POS sites and some of the indoor dust sampled sites. However, key variables, such as the actual exposure duration, frequency of contact and indoor cleaning protocols will significantly reduce the potential risk. Finally, the ingestion of soils and indoor dust contaminated with OPFRs and BPA was investigated and noted in almost all cases to be below the USEPA reference doses.

Rapid evaluation of ammonium in different rain events minimizing needed volume by a cost-effective and sustainable PDMS supported solid sensor.

The presence of ammonium ion in rainwater is due to atmospheric processes which involve its scavenging from gas phase and particulate matter. The fractionated samplings of rainwater can provide information about these processes and their potential sources. However, only a low sample volume may be available, which constrained the analysis in general and more particularly in situ mode. For minimizing this limitation, this work proposes a polydimethylsiloxane (PDMS)-salicylate sensor that produces a color change. The embedding of solid reagents into PDMS was optimized. Good analytical characteristics (analysis time of 10 min, sample volume of 500 µL, limit of detection 0.03 µgmL-1) were obtained. Furthermore, other features of the method such as carbon footprint, equipment cost, residues, toxicity and safety have to be taken into account to be assessed according to the Green Analytical Chemistry approach. In this sense, the hexagon tool was employed for comparing the proposed sensor with methods based on the same reaction as well as with general methods for the ammonium analysis in water (using luminol, ion selective electrode, Nessler and modified Roth method). The proposed method based on PDMS-salicylate sensor stands out from all the others by its sustainability, particularly, in terms of low carbon footprint, residues and cost. The method was applied to fractionated samplings in a suburban site (Galicia, Northwestern Spain) and a higher contribution of the rainout process was observed. When long-duration rain events were analyzed, a relationship between the sampling time and ammonium concentration could indicate a loss of ammonium ion over time. The research focuses on developing an innovative PDMS-sensor, for monitoring ammonium determination in rainwater under wide conditions (scavenging process).

Standardization of the minimum information for publication of infrared-related data when microplastics are characterized.

Infrared spectrometry (IR) became a workhorse to characterize microplastics (MPs) worldwide. However, reports on the experimental conditions to measure them decreased alarmingly. As complete, relevant information on the instrumental setup determining IR spectra is crucial for scientific reproducibility, ca. 50% of the papers that reported FTIR to measure MPs were evaluated and it was found that most studies cannot be replicated due to missing experimental details. To ameliorate this, the most critical parameters influencing IR spectra are depicted, their impact when matching a spectrum against databases exemplified, and, following efforts from other scientific fields, a minimum information for publication of IR-related data on MPs characterization (MIPIR-MP) is proposed, along with a brief, simple paragraph to resume the most critical information to be reported. This can be used to improve the worrying figures that point out to a reproducibility crisis in the field, as disclosed by the survey.