RESUMEN
Transition metal dichalcogenides (TMDs) have garnered significant attention as efficient electrocatalysts for the hydrogen evolution reaction (HER) due to their high activity, stability, and cost-effectiveness. However, the development of a convenient and economical approach for large-scale HER applications remains a persistent challenge. In this study, we present the successful synthesis of TMD nanoparticles (including MoS2, RuS2, ReS2, MoSe2, RuSe2, and ReSe2) using a general colloidal method at room temperature. Notably, the ReSe2 nanoparticles synthesized in this study exhibit superior HER performance compared with previously reported nanostructured TMDs. Importantly, the synthesis of these TMD nanoparticles can readily be scaled up to gram quantities while preserving their exceptional HER performance. These findings highlight the potential of colloidal synthesis as a versatile and scalable approach for producing TMD nanomaterials with outstanding electrocatalytic properties for water splitting.
RESUMEN
Metal-enhanced photoluminescence is able to provide a robust signal even from a single emitter and is promising in applications in biosensors and optoelectronic devices. However, its realization with semiconductor nanocrystals (e.g., quantum dots, QDs) is not always straightforward due to the hidden and not fully described interactions between plasmonic nanoparticles and an emitter. Here, we demonstrate nonclassical enhancement (i.e., not a conventional electromagnetic mechanism) of the QD photoluminescence at nonplasmonic conditions and correlate it with the charge exchange processes in the system, particularly with high efficiency of the hot-hole generation in gold nanoparticles and the possibility of their transfer to QDs. The hole injection returns a QD from a charged nonemitting state caused by hole trapping by surface and/or interfacial traps into an uncharged emitting state, which leads to an increased photoluminescence intensity. These results open new insights into metal-enhanced photoluminescence, showing the importance of the QD surface states in this process.
RESUMEN
In the past two decades, direct laser writing (DLW) technologies have seen tremendous growth. However, strategies that enhance the printing resolution and the development of printing material with assorted functionalities are still sparser than expected. Herein, a cost-effective method to tackle this bottleneck is presented. Semiconductor quantum dots (QDs) are selected to carry out this task, most importantly via surface chemistry modification to enable their copolymerization with themonomers, resulting in transparent composites. The evaluations indicate that the QDs show great colloidal stability and their photoluminescent properties are well-preserved. This allows further exploration of the printing characteristics of such composite material. It is shown that in the presence of the QDs, the material provides a much lower polymerization threshold with faster linewidth growth, indicating that the QDs form a synergetic relationship with the monomer and the photoinitiator, widening the dynamic range of the material and thus increasing the writing efficiency for broader fields of applications. Lowering the polymerization threshold reduces the minimum achievable feature size by ≈32%, which is well-matched with STED-based (i.e., stimulated-emission depletion microscopy) methods in writing 3D structures. The study further elucidates the mechanism of the synergetic behavior, further guiding the future development of functional materials for DLW-related printing technologies.
RESUMEN
Recently, colloidal semiconductor nanocrystals (NCs) are finding more and more applications in optoelectronic devices. Their usage, however, is still very far from the great potential already demonstrated in many fields owing to their unique features. While researchers are still struggling to achieve a wider gamut of different semiconductor nanomaterials with more controllable properties, the library of already existing candidates is large enough to harness their potential. Modification of well-studied semiconductor NCs by means of their chemical transformations can greatly advance their practical exploitation. In this Perspective, the main types of chemical transformations represented by ligand and cation exchange reactions and their recent examples are summarized. While ligand exchange is used to adjust the surface of a semiconductor NC, cation exchange allows us to engineer its core composition. Both approaches greatly extend the range of properties of the resulting nanomaterials, advancing their further incorporation into optoelectronic devices.
RESUMEN
Nanocrystal micro/nanoarrays with multiplexed functionalities are of broad interest in the field of nanophotonics, cellular dynamics, and biosensing due to their tunable electrical and optical properties. This work focuses on the multicolor patterning of two-dimensional nanoplatelets (NPLs) via two sequential self-assembly and direct electron-beam lithography steps. By using scanning electron microscopy, atomic force microscopy, and fluorescence microscopy, we demonstrate the successful fabrication of fluorescent nanoarrays with a thickness of only two or three monolayers (7-11 nm) and a feature line width of â¼40 nm, which is three to four NPLs wide. To this end, first, large-area thin films of red-emitting CdSe/ZnyCd1-yS and green-emitting CdSe1-xSx/ZnyCd1-yS core/shell NPLs are fabricated based on Langmuir-type self-assembly at the liquid/air interface. By varying the concentration of ligands in the subphase, we investigate the effect of interaction potential on the film's final characteristics to prepare thin superlattices suitable for the patterning step. Equipped with the ability to fabricate a uniform superlattice with a controlled thickness, we next perform nanopatterning on a thin film of NPLs utilizing a direct electron-beam lithography (EBL) technique. The effect of acceleration voltage, aperture size, and e-beam dosage on the nanopattern's resolution and fidelity is investigated for both of the presented NPLs. After successfully optimizing EBL parameters to fabricate single-color nanopatterns, we finally focus on fabricating multicolor patterns. The obtained micro/nanoarrays provide us with an innovative experimental platform to investigate biological interactions as well as Förster resonance energy transfer.
RESUMEN
Cation exchange emerged as a versatile tool to obtain a variety of nanocrystals not yet available via a direct synthesis. Reduced reaction times and moderate temperatures make the method compatible with anisotropic nanoplatelets (NPLs). However, the subtle thermodynamic and kinetic factors governing the exchange require careful control over the reaction parameters to prevent unwanted restructuring. Here, we capitalize on the research success of CdSe NPLs by transforming them into PbSe NPLs suitable for optoelectronic applications. In a two-phase mixture of hexane/N-methylformamide, the oleate-capped CdSe NPLs simultaneously undergo a ligand exchange to NH4I and a cation exchange reaction to PbSe. Their morphology and crystal structure are well-preserved as evidenced by electron microscopy and powder X-ray diffraction. We demonstrate the successful ligand exchange and associated electronic coupling of individual NPLs by fabricating a simple photodetector via spray-coating on a commercial substrate. Its optoelectronic characterization reveals a fast light response at low operational voltages.
RESUMEN
Photoluminescent quantum dots (QDs) are a prominent example of nanomaterials used in practical applications, especially in light-emitting and light-converting devices. Most of the current applications of QDs require formation of thin films or their incorporation in solid matrices. The choice of an appropriate host material capable of preventing QDs from degradation and developing a process of uniform incorporation of QDs in the matrix have become essential scientific and technological challenges. In this work, we developed a method of uniform incorporation of Cu-Zn-In-S (CZIS) QDs into a highly protective cross-linked polyisobutylene (PIB) matrix with high chemical resistance and low gas permeability. Our approach involves the synthesis of a methacrylate-terminated three-arm star-shaped PIB oligomeric precursor capable of quick formation of a robust 3D polymer network upon exposure to UV-light, as well as the design of a special ligand introducing short PIB chains onto the surface of the QDs, thus providing compatibility with the matrix. The obtained cross-linked QDs-in-polymer composites underwent a complex photostability test in air and under vacuum as well as a chemical stability test. These tests found that CZIS QDs in a cross-linked PIB matrix demonstrated excellent photo- and chemical stability when compared to identical QDs in widely used polyacrylate-based matrices. These results make the composites developed excellent materials for the fabrication of robust, stable and durable transparent light conversion layers.
RESUMEN
Semiconductor colloidal nanoplatelets (NPLs) are a promising new class of nanostructures that can bring much impact on lightning technologies, light-emitting diodes (LED), and laser fabrication. Indeed, great progress has been made in optimizing the optical properties of the NPLs for the visible spectral range, which has already made the implementation of a number of effective devices on their basis possible. To date, state-of-the-art near-infrared (NIR)-emitting NPLs are significantly inferior to their visible-range counterparts, although it would be fair to say that they received significantly less research attention so far. In this study, we report a comprehensive analysis of steady-state and time-dependent photoluminescence (PL) properties of four monolayered (ML) PbSe NPLs. The PL measurements are performed in a temperature range of 78-300 K, and their results are compared to those obtained for CdSe NPLs and PbSe quantum dots (QDs). We show that multiple emissive states, both band-edge and trap-related, are responsible for the formation of the NPLs' PL band. We demonstrate that the widening of the PL band is caused by the inhomogeneous broadening rather than homogeneous one, and analyze the possible contributions to PL broadening.
RESUMEN
The material-efficient monolayers of transition-metal dichalcogenides (TMDs) are a promising class of ultrathin nanomaterials with properties ranging from insulating through semiconducting to metallic, opening a wide variety of their potential applications from catalysis and energy storage to optoelectronics, spintronics, and valleytronics. In particular, TMDs have a great potential as emerging inexpensive alternatives to noble metal-based catalysts in electrochemical hydrogen evolution. Herein, we report a straightforward, low-cost, and general colloidal synthesis of various 2D transition-metal disulfide nanomaterials, such as MoS2, WS2, NiSx, FeSx, and VS2, in the absence of organic ligands. This new preparation route provides many benefits including relatively mild reaction conditions, high reproducibility, high yields, easy upscaling, no post-thermal annealing/treatment steps to enhance the catalytic activity, and, finally, especially for molybdenum disulfide nanosheets, high activity in the hydrogen evolution reaction. To underline the universal application of the synthesis, we prepared mixed CoxMo1-xS2 nanosheets in one step to optimize the catalytic activity of pure undoped MoS2, which resulted in an enhanced hydrogen evolution reaction performance characterized by onset potentials as low as 134 mV and small Tafel slopes of 55 mV/dec.
RESUMEN
We demonstrate high-mobility solution-processed inorganic field-effect transistors (FETs) with ultra-short channel (USC) length using semiconductor CdSe nanocrystals (NCs). Capping of the NCs with hybrid inorganic-organic CdCl3--butylamine ligands enables coarsening of the NCs during annealing at a moderate temperature, resulting in the devices having good transport characteristics with electron mobilities in the saturation regime reaching 8 cm2 V-1 s-1. Solution-based processing of the NCs and fabrication of thin films involve neither harsh conditions nor the use of hydrazine. Employing photolithographic methods, we fabricated FETs with a vertical overlap of source and drain electrodes to achieve a submicrometer channel length. To the best of our knowledge, this is the first report on an USC FET based on colloidal semiconductor NCs. Because of a short channel length, the FETs show a normalized transconductance of 4.2 m V-1 s-1 with a high on/off ratio of 105.
RESUMEN
In this work, we present a new synthetic approach to colloidal PbS nanoplatelets (NPLs) utilizing a cation exchange (CE) strategy starting from CuS NPLs synthesized via the hot-injection method. Whereas the thickness of the resulting CuS NPLs was fixed at approx. 5 nm, the lateral size could be tuned by varying the reaction conditions, such as time from 6 to 16 h, the reaction temperature (120 °C, 140 °C), and the amount of copper precursor. In a second step, Cu+ cations were replaced with Pb2+ ions within the crystal lattice via CE. While the shape and the size of parental CuS platelets were preserved, the crystal structure was rearranged from hexagonal covellite to PbS galena, accompanied by the fragmentation of the monocrystalline phase into polycrystalline one. Afterwards a halide mediated ligand exchange (LE) was carried out in order to remove insulating oleic acid residues from the PbS NPL surface and to form stable dispersions in polar organic solvents enabling thin-film fabrication. Both CE and LE processes were monitored by several characterization techniques. Furthermore, we measured the electrical conductivity of the resulting PbS NPL-based films before and after LE and compared the processing in ambient to inert atmosphere. Finally, we fabricated field-effect transistors with an on/off ratio of up to 60 and linear charge carrier mobility for holes of 0.02 cm2 V-1 s-1.
RESUMEN
Stoichiometric Cu2Se nanocrystals were synthesized in either cubic or hexagonal (metastable) crystal structures and used as the host material in cation exchange reactions with Pb2+ ions. Even if the final product of the exchange, in both cases, was rock-salt PbSe nanocrystals, we show here that the crystal structure of the starting nanocrystals has a strong influence on the exchange pathway. The exposure of cubic Cu2Se nanocrystals to Pb2+ cations led to the initial formation of PbSe unselectively on the overall surface of the host nanocrystals, generating Cu2Se@PbSe core@shell nanoheterostructures. The formation of such intermediates was attributed to the low diffusivity of Pb2+ ions inside the host lattice and to the absence of preferred entry points in cubic Cu2Se. On the other hand, in hexagonal Cu2Se nanocrystals, the entrance of Pb2+ ions generated PbSe stripes "sandwiched" in between hexagonal Cu2Se domains. These peculiar heterostructures formed as a consequence of the preferential diffusion of Pb2+ ions through specific (a, b) planes of the hexagonal Cu2Se structure, which are characterized by almost empty octahedral sites. Our findings suggest that the morphology of the nanoheterostructures, formed upon partial cation exchange reactions, is intimately connected not only to the NC host material, but also to its crystal structure.
RESUMEN
We report on a simple and effective technique of tuning the colloidal solubility of inorganic-capped CdSe and CdSe/CdS core/shell nanocrystals (NCs) from highly polar to nonpolar media using n-butylamine molecules. The introduction of the short and volatile organic amine mainly results in a modification of the labile diffusion region of the inorganic-capped NCs, enabling a significant extension of their dispersibility and improving the ability to form long-range assemblies. Moreover, the hybrid n-butylamine/inorganic capping can be thermally decomposed under mild heat treatment, making this approach of surface functionalization well-compatible with a low-temperature, solution-processed device fabrication. Particularly, a field-effect transistor-based on n-butylamine/Ga-I-complex-capped 4.5 nm CdSe NC solids shows excellent transport characteristics with electron mobilities up to 2 cm2/(V·s) and a high current modulation value (>104) at a low operation voltage (<2 V).
RESUMEN
We report an unsurpassed solution characterization technique based on analytical ultracentrifugation, which demonstrates exceptional potential for resolving particle sizes in solution with sub-nm resolution. We achieve this improvement in resolution by simultaneously measuring UV/Vis spectra while hydrodynamically separating individual components in the mixture. By equipping an analytical ultracentrifuge with a novel multi-wavelength detector, we are adding a new spectral discovery dimension to traditional hydrodynamic characterization, and amplify the information obtained by orders of magnitude. We demonstrate the power of this technique by characterizing unpurified CdTe nanoparticle samples, avoiding tedious and often impossible purification and fractionation of nanoparticles into apparently monodisperse fractions. With this approach, we have for the first time identified the pure spectral properties and band-gap positions of discrete species present in the CdTe mixture.
Asunto(s)
Compuestos de Cadmio/química , Puntos Cuánticos/química , Telurio/química , Coloides/química , Hidrodinámica , Tamaño de la Partícula , Espectrofotometría Ultravioleta , UltracentrifugaciónRESUMEN
We report an efficient approach to assemble a variety of electrostatically stabilized all-inorganic semiconductor nanocrystals (NCs) by their linking with appropriate ions into multibranched gel networks. These all-inorganic non-ordered 3D assemblies benefit from strong interparticle coupling, which facilitates charge transport between the NCs with diverse morphologies, compositions, sizes, and functional capping ligands. Moreover, the resulting dry gels (aerogels) are highly porous monolithic structures, which preserve the quantum confinement of their building blocks. The inorganic semiconductor aerogel made of 4.5â nm CdSe colloidal NCs capped with I(-) ions and bridged with Cd(2+) ions had a large surface area of 146â m(2) g(-1) .
RESUMEN
The application of electrochemical methods for the characterization of colloidal quantum dots (QDs) attracts considerable attention as these methods may allow for monitoring of some crucial parameters, such as energetic levels of conduction and valence bands as well as surface traps and ligands under real conditions of colloidal solution. In the present work we extend the applications of cyclic voltammetry (CV) to in situ monitoring of degradation processes of water-soluble CdTe QDs. This degradation occurs under lowering of pH to the values around 5, i.e. under conditions relevant to bioimaging applications of these QDs, and is accompanied by pronounced changes of their photoluminescence. Observed correlations between characteristic features of CV diagrams and the fluorescence spectra allowed us to propose mechanisms responsible for evolution of the photoluminescence properties as well as degradation pathway of CdTe QDs at low pH.
RESUMEN
The absolute electronic energy levels in Hg-doped CdTe semiconductor nanocrystals (CdHgTe NCs) with varying sizes/volumes and Hg contents are determined by using cyclic voltammetry (CV) measurements and density functional theory (DFT) -based calculations. The electrochemical measurements demonstrate several distinct characteristic features in the form of oxidation and reduction peaks in the voltammograms, where the peak positions are dependent on the volume of CdHgTe NCs as well as on their composition. The estimated absolute electronic energy levels for three different volumes, namely 22, 119 and 187â nm(3) with 2.7±0.3 % of Hg content, show strong volume dependence. The volume-dependent shift in the characteristic reduction and oxidation peak potential scan can be attributed to the alteration in the energetic band positions owing to the quantum confinement effect. Moreover, the composition (Cd/Hg=98.3/1.7 and 97.0/3.0) -dependent alteration in the electronic energy levels of CdHgTe NCs for two different samples with similar volumes (ca. 124±5â nm(3) ) are shown. Thus obtained electronic energy level values of CdHgTe NCs as a function of volume and composition demonstrate good congruence with the corresponding absorption and emission spectral data, as well as with DFT-based calculations. DFT calculations reveal that incorporation of Hg into CdTe NCs mostly affects the energy levels of conduction band edge, whereas the valence band edge remains almost unaltered.
RESUMEN
Capping agents play an important role in the colloidal synthesis of nanomaterials because they control the nucleation and growth of particles, as well as their chemical and colloidal stability. During recent years tetrazole derivatives have proven to be advanced capping ligands for the stabilization of semiconductor and metal nanoparticles. Tetrazole-capped nanoparticles can be prepared by solution-phase or solventless single precursor approaches using metal derivatives of tetrazoles. The solventless thermolysis of metal tetrazolates can produce both individual semiconductor nanocrystals and nanostructured metal monolithic foams displaying low densities and high surface areas. Alternatively, highly porous nanoparticle 3D assemblies are achieved through the controllable aggregation of tetrazole-capped particles in solutions. This approach allows for the preparation of non-ordered hybrid structures consisting of different building blocks, such as mixed semiconductor and metal nanoparticle-based (aero)gels with tunable compositions. Another unique property of tetrazoles is their complete thermal decomposition, forming only gaseous products, which is employed in the fabrication of organic-free semiconductor films from tetrazole-capped nanoparticles. After deposition and subsequent thermal treatment these films exhibit significantly improved electrical transport. The synthetic availability and advances in the functionalization of tetrazoles necessitate further design and study of tetrazole-capped nanoparticles for various applications.
RESUMEN
Hierarchical superstructures formed by self-assembled nanoparticles exhibit interesting electrochemical properties that can potentially be exploited in Li-ion batteries (LIBs) as possible electrode materials. In this work, we tested two different morphologies of CuS superstructures for electrodes, namely, tubular dandelion-like and ball-like assemblies, both of which are composed of similar small covellite nanoparticles. These two CuS morphologies are characterized by their markedly different electrochemical performances, suggesting that their complex structures/morphologies influence the electrochemical properties. At 1.12â A g(-1), the cells made with CuS tubular structures delivered about 420â mAh g(-1), and at 0.56â A g(-1), the capacity was as high as about 500â mAh g(-1) with good capacity retention. Their ease of preparation and processing, together with good electrochemical performance, make CuS tubular dandelion-like clusters attractive for developing low-cost LIBs based on conversion reactions.