SARS-CoV-2 positivity rates in tear secretions of inpatient COVID-positive individuals in an Indian tertiary care setting.

PURPOSE: In the third wave of the coronavirus disease 2019 (COVID-19) pandemic, despite progressive vaccination coverage, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was rapidly spreading and the possibility for ocular transmission of COVID-19 was most relevant. This study aimed to determine the presence of SARS-CoV-2 RNA in tears as detected by real-time polymerase chain reaction (RT-PCR), among individuals who tested COVID-positive during the third wave of the COVID pandemic. METHODS: Among 90 patients admitted with mild to severe COVID-19 infection (ranging from asymptomatic to severe symptoms), separate conjunctival samples were obtained from both eyes without topical anesthesia taking precautions to avoid contamination. Inferior fornices of the eyes were swept slowly with sterile Dacron swabs for 10 s or until visibly wet. They were inoculated directly in a viral lysis buffer containing carrier RNA and transported to the Virology Laboratory for the detection of SARS-CoV-2 RNA by RT-PCR. Conjunctival swabs were declared positive based on cycle threshold values of <37. RESULTS: Seven of 180 conjunctival swabs were positive (3.9%). Five patients had unilateral positive and one patient had bilateral positive conjunctival swabs. Thirty-six (40%) patients had their conjunctival swabs taken on the same day of detection of the first positive nasopharyngeal swab, while the rest (54) had their conjunctival swabs taken up to 3 days later. Overall, 20 (22.2%) patients were symptomatic for COVID-19. CONCLUSION: Considering the contagious nature of SARS-CoV-2 in the third wave, there is a possibility that ocular surface fluid might have been a contributing factor along with other modes of transmission of COVID-19.

In vitro larvicidal efficacy of Lantana camara essential oil and its nanoemulsion and enzyme inhibition kinetics against Anopheles culicifacies.

Mosquitoes are important vectors for the transmission of several infectious diseases that lead to huge morbidity and mortality. The exhaustive use of synthetic insecticides has led to widespread resistance and environmental pollution. Using essential oils and nano-emulsions as novel insecticides is a promising alternative approach for controlling vector borne diseases. In the current study, Lantana camara EO and NE were evaluated for their larvicidal and pupicidal activities against Anopheles culicifacies. The inhibitory effect of EO and NE on AChE, NSE (α/ß), and GST was also evaluated and compared. GC-MS analysis of oil displayed 61 major peaks. The stable nano-emulsion with an observed hydrodynamic diameter of 147.62 nm was formed using the o/w method. The nano-emulsion exhibited good larvicidal (LC50 50.35 ppm and LC90 222.84 ppm) and pupicidal (LC50 54.82 ppm and LC90 174.58 ppm) activities. Biochemical evaluations revealed that LCEO and LCNE inhibited AChE, NSE (α/ß), and GST, displaying LCNE to be a potent binder to AChE and NSE enzyme, whereas LCEO showed higher binding potency towards GST. The nano-emulsion provides us with novel opportunities to target different mosquito enzymes with improved insecticidal efficacy. Due to its natural origin, it can be further developed as a safer and more potent larvicide/insecticide capable of combating emerging insecticide resistance.

Enantioselective total synthesis of atisane diterpenoids: (+)-sapinsigin H, (+)-agallochaol C, and (+)-16α, 17-dihydroxy-atisan-3-one.

Enantioselective total synthesis of (+)-sapinsigin H, (+)-agallochaol C, and (+)-16α, 17-dihydroxy-atisan-3-one has been accomplished starting from enantiopure Wieland-Miescher ketone. Key features of the syntheses include a benzannulation step to construct the tricyclic core, an oxidative dearomatization step to generate the diene, and a Diels-Alder reaction with ethylene gas to establish the bicyclo[2.2.2]octane framework. Efficient late-stage functionalisation of the A-ring by aerobic oxidation and Baeyer-Villiger oxidation completed the atisane target molecules.

The potential of genome editing to create novel alleles of resistance genes in rice.

Rice, a staple food for a significant portion of the global population, faces persistent threats from various pathogens and pests, necessitating the development of resilient crop varieties. Deployment of resistance genes in rice is the best practice to manage diseases and reduce environmental damage by reducing the application of agro-chemicals. Genome editing technologies, such as CRISPR-Cas, have revolutionized the field of molecular biology, offering precise and efficient tools for targeted modifications within the rice genome. This study delves into the application of these tools to engineer novel alleles of resistance genes in rice, aiming to enhance the plant's innate ability to combat evolving threats. By harnessing the power of genome editing, researchers can introduce tailored genetic modifications that bolster the plant's defense mechanisms without compromising its essential characteristics. In this study, we synthesize recent advancements in genome editing methodologies applicable to rice and discuss the ethical considerations and regulatory frameworks surrounding the creation of genetically modified crops. Additionally, it explores potential challenges and future prospects for deploying edited rice varieties in agricultural landscapes. In summary, this study highlights the promise of genome editing in reshaping the genetic landscape of rice to confront emerging challenges, contributing to global food security and sustainable agriculture practices.

A flexible dual-band 4 × 4 MIMO antenna for 5G mm-wave 28/38 GHz wearable applications.

This paper presents a novel, dual-band, four-port multi-input-multi-output (MIMO) antenna for 28/38 GHz millimeter wave 5G wearable applications. In the proposed work, we have used a novel design approach to get the dual-band behavior from a MIMO design with a small footprint of 18 × 8.5 × 0.25 mm3. For this purpose, each MIMO element is designed as a composite form of a circular and elliptical structure connected with a narrow strip and fed by a tapered feedline. The peak realized gains and total efficiencies of the antenna, evaluated in free space, are 4.15 dBi, 7.73 dBi and 80.13%, 85.44% at 28 GHz and 38 GHz frequencies, respectively. To appraise the thorough behavior of the MIMO antenna, we have evaluated all the parameters of the antenna: Envelope Correlation Coefficient (ECC), Diversity Gain (DG), Mean Effective Gain (MEG), Channel Capacity Loss (CCL), and Total Active Reflection Coefficient (TARC), and found them satisfactory. Channel capacity of the antenna at SNR = 20 dB is found to be 21.61 bps/Hz. For wearable applications, the proposed 4-port MIMO antenna is designed on a flexible Rogers 3003 substrate, and the performance is checked by evaluating bending analysis. The safety of the antenna is verified by analyzing the 1 g/10 g SAR at 28/38 GHz and the corresponding average SAR values are 0.11/0.08 W/kg and 0.05/0.04 W/kg, respectively. All the average SAR values for the proposed MIMO antenna are within the acceptable limits according to FCC/ICNIRP standards.

Binder-Free CNT-Modified Excellent Electrodes for All-Vanadium Redox Flow Batteries.

Electrodes are one of the key components that influence the performance of all-vanadium redox flow batteries (VRFBs). A porous graphite felt with modified fiber surfaces that can provide a high specific activation surface is preferred as the electrode of a VRFB. In this study, a simple binder-free approach is developed for preparing stable carbon nanotube modified graphite felt electrodes (CNT-GFs). Heat-treated graphite felt electrodes (H-GFs) are dip-coated using CNT homogeneous solution. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results conclude that CNT-GFs have less resistance, better reaction currents, and reversibility as compared to H-GF. Cell performances showed that CNT-GFs significantly improve the performance of a VRFB, especially for the CNT-GF served in the positive side of the VRFB. CNT presence increases the electrochemical properties of the graphite electrode; as a result, reaction kinetics for both VO2+/VO2+ and V3+/V2+ are improved. Positive CNT-GF (P-CNT-GF) configured VRFB exhibits voltage efficiency, coulombic efficiency, and energy efficiency of 85%, 97%, and 82%, respectively, at the operating current density of 100 mA cm-2. At high current density of 200 mA cm-2, the VRFB with P-CNT-GF shows 73%, 98%, and 72% of the voltage, coulombic, and energy efficiencies, respectively. The energy efficiency of the CNT-GF is 6% higher when compared with that of B-H-GF. The VRFB with CNT-GF can provide stable performance for 300 cycles at 200 mA cm-2.

Physiochemical and Electrochemical Properties of a Heat-Treated Electrode for All-Iron Redox Flow Batteries.

Iron redox flow batteries (IRFBs) are cost-efficient RFBs that have the potential to develop low-cost grid energy storage. Electrode kinetics are pivotal in defining the cycle life and energy efficiency of the battery. In this study, graphite felt (GF) is heat-treated at 400, 500 and 600 °C, and its physicochemical and electrochemical properties are studied using XPS, FESEM, Raman and cyclic voltammetry. Surface morphology and structural changes suggest that GF heat-treated at 500 °C for 6 h exhibits acceptable thermal stability while accessing the benefits of heat treatment. Specific capacitance was calculated for assessing the wettability and electrochemical properties of pristine and treated electrodes. The 600 °C GF has the highest specific capacitance of 34.8 Fg-1 at 100 mV s-1, but the 500 °C GF showed the best battery performance. The good battery performance of the 500 °C GF is attributed to the presence of oxygen functionalities and the absence of thermal degradation during heat treatment. The battery consisting of 500 °C GF electrodes offered the highest voltage efficiency of ~74%, Coulombic efficiency of ~94%, and energy efficiency of ~70% at 20 mA cm-2. Energy efficiency increased by 7% in a battery consisting of heat-treated GF in comparison to pristine GF. The battery is capable of operating for 100 charge-discharge cycles with an average energy efficiency of ~ 67% for over 100 cycles.

Lid-wiper keratopathy and mucous membrane grafting.

BACKGROUND: A healthy lid-wiper is an important component of a healthy ocular surface. Any abnormality or irregularity of the lid wiper can potentially damage a relatively healthy ocular surface. Stevens-Johnson syndrome, toxic epidermal necrolysis, and ocular cicatricial pemphigoid are some of the examples that can result in lid-margin keratinization during the course of the disease. These permanent changes at the lid margin mechanically abrade the corneal surface and facilitate corneal neovascularization. The corneal clarity is lost over time, and the patients have corneal blindness. PURPOSE: This video discusses the role of a healthy lid-wiper, conditions causing lid-margin keratinization and subsequent lid-wiper keratopathy, and surgical technique in mucous membrane grafting. SYNOPSIS: The video demonstrates the technique of restoration of a healthy lid margin by doing a mucous membrane graft for lid-margin keratinization and its role in the prevention of corneal blindness. HIGHLIGHTS: Lid-margin keratinization is essentially a chronic sequela and is often ignored till irreversible corneal changes develop. Early intervention in the form of mucous membrane grafting can prevent corneal vascularization and loss of corneal clarity. VIDEO LINK: https://youtu.be/NGMlqUp_qLU.

Mn Additive Improves Zr Grain Boundary Diffusion for Sintering of a Y-Doped BaZrO3 Proton Conductor.

Yttrium-doped barium zirconate (BZY) has garnered attention as a protonic conductor in intermediate-temperature electrolysis and fuel cells due to its high bulk proton conductivity and excellent chemical stability. However, the performance of BZY can be further enhanced by reducing the concentration and resistance of grain boundaries. In this study, we investigate the impact of manganese (Mn) additives on the sinterability and proton conductivity of Y-doped BaZrO3 (BZY). By employing a combinatorial pulsed laser deposition (PLD) technique, we synthesized BZY thin films with varying Mn concentrations and sintering temperatures. Our results revealed a significant enhancement in sinterability as Mn concentrations increased, leading to larger grain sizes and lower grain boundary concentrations. These improvements can be attributed to the elevated grain boundary diffusion of zirconium (Zr) cations, which enhances material densification. We also observed a reduction in Goldschmidt's tolerance factor with increased Mn substitution, which can improve proton transport. The high proton conduction of BZY with Mn additives in low-temperature and wet hydrogen environments makes it a promising candidate for protonic ceramic electrolysis cells and fuel cells. Our findings not only advance the understanding of Mn additives in BZY materials but also demonstrate a high-throughput combinatorial thin film approach to select additives for other perovskite materials with importance in mass and charge transport applications.

Optimizing light regimes for neutral lipid accumulation in Dunaliella salina MCC 43: a study on physiological status and carbon allocation.

Dunaliella salina is a favourable source of high lipid feedstock for biofuel and medicinal chemicals. Low biomass output from microalgae is a significant barrier to industrial-scale commercialisation. The current study aimed to determine how photosynthetic efficiency, carbon fixation, macromolecular synthesis, accumulation of neutral lipids, and antioxidative defence (ROS scavenging enzyme activities) of D. salina cells were affected by different light intensities (LI) (50, 100, 200, and 400 µmol m-2 s-1). The cells when exposed to strong light (400 µmol m-2 s-1) led to reduction in chlorophyll a but the carotenoid content increased by 19% in comparison to the control (LI 100). The amount of carbohydrate changed significantly under high light and in spite of stress inflicted on the cells by high irradiation, a considerable increase in activity of carbonic anhydrase and fixation rate of CO2 were recorded, thus, preserving the biomass content. The high light exposed biomass when subjected to nitrogen-deficient medium led to increase in lipid content (59.92% of the dry cell weight). However, neutral lipid made up 78.26% of the total lipid while other lipids like phospholipid and glycolipid content decreased, showing that the lipid was redistributed in these cells under nitrogen deprivation, making the organism more appropriate for biodiesel/jet fuel use. Although D. salina cells had a relatively longer generation time (3.5 d) than other microalgal cells, an economic analysis concluded that the amount of carotenoid they produced and the quality of their lipids made them more suited for commercialization.

Survival benefit of exenteration in COVID-19-associated rhino-orbital mucormycosis.

PURPOSE: There has been a sudden increase in the number of rhino-orbital mucormycosis cases, primarily affecting patients recovering from COVID-19 infection. The local health authorities have declared the current situation an epidemic. In this study, we assess the role of exenteration in preventing disease progression and improving survival in patients with rhino-orbital mucormycosis. METHODS: The patients undergoing exenteration were grouped into the exenteration arm and those denying exenteration were grouped into the nonexenteration arm. The patients were followed at 1 month and 3 months. The 6-month survival data were collected telephonically. Continuous data were presented as Mean ± SD/Median (IQR) depending on the normality distribution of data, whereas the frequency with percentages was used to present the categorical variables. Kaplan-Meier survival curves were created to estimate the difference in survival of patients with exenteration in rhino-orbital mucormycosis versus those without exenteration. RESULTS: A total of 14 patients were recruited for our study based on the inclusion and exclusion criteria. All the patients were qualified for exenteration; however, only eight patients underwent exenteration and six patients did not consent to exenteration. At the end of 3 months in the exenteration group, four (50%) patients died. Two patients died within a week of exenteration, whereas two patients died after 2 weeks of exenteration. The deaths in the first week were attributed to septic shock and the deaths happening beyond 2 weeks were attributed to severe meningitis. The Kaplan-Meier survival analysis showed the cumulative probability of being alive at 1 month in the exenteration arm to be 85%, and it decreased to 67% by 53 days and subsequently remained stable until the end of 3 months. CONCLUSION: The Kaplan-Meier survival analysis did not show a survival benefit of exenteration at 3 months and 6 months in COVID-associated rhino-orbital mucormycosis.

Morphological control for high proton conduction in robust Co3O4-diethylmethylamine (metal-organic framework) membrane.

Metal-organic framework (MOF) based proton conductors are synthesized by the Avrami model (time-temperature modalities). Our objective here is to obtain a material with high proton conductivity in anhydrous conditions, improved catalytic behaviour and morphology control of conductivity, band gap and catalysis. For this purpose, we try to understand the role of morphology on mass transportation using computational fluid dynamics and the experimental realisation using the synthesis of MOF membranes with high protonic conductivity. In order to alter the morphology, the membranes are synthesized from protic ionic liquid (dimethyl ethyl amine H2PO4) and metal ion (Co3O4) at different temperatures and duration. A high protonic conductivity of 0.0286 S cm-1 with a high transference number >0.99 is observed in anhydrous conditions with the change in morphology. Furthermore, catalyst properties along with high activity (Tafel slope = 39 mV decade-1) with the alteration in morphology are also investigated in detail and observed adsorption governed conduction. This adsorption governed conduction is verified using computational fluid dynamics simulations with the alteration in morphology. This study suggests that morphology not only plays a pivotal role in obtaining a robust proton exchange membrane, it also improves the catalytic functionality and stability of the membrane.