RESUMEN
Three berberine-containing plant extracts were investigated for their pharmacological properties. The stems and leaves of Berberis vulgaris, Mahonia aquifolium, and Phellodendron amurense were characterized through scanning electron microscopy. The plant extracts obtained from fresh stem barks were further analyzed through high-performance liquid chromatography, revealing berberine concentrations, among berbamine and palmatine. The plant extracts were further tested for their anticancer potential against 2D and 3D human skin melanoma (A375) and lung adenocarcinoma (A549) cell lines. The concentrations at which 50% of the cells are affected was determined by the viability assay and it was shown that B. vulgaris, the plant extract with the highest berberine concentration, is the most efficient inhibitor (0.4% extract concentration for the 2D model and 3.8% for the 3D model). The membrane integrity and nitrate/nitrite concentration assays were consistent with the viability results and showed effective anticancer potential. For further investigations, the B. vulgaris extract was used to obtain silver nanoparticles, which were characterized through transmission electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. The formed nanoparticles have a uniform size distribution and are suited for future investigations in the field of biomedical applications, together with the B. vulgaris plant extract.
RESUMEN
A novel nanoporous adsorbent was obtained through the thermal treatment and chemical wash of the wasted crab shells (BC1) and characterized by various techniques. The structure of BC1 at the end of the treatments comprised a mixture of calcite and amorphous CaCO3, as evidenced by X-ray diffraction and Fourier transform infrared absorption. The BET surface area, BET pore volume, and pore diameter were 250.33 m2 g-1, 0.4 cm3 g-1, and <70 nm, respectively. The point of zero charge of BC1 was determined to be around pH 9. The prepared adsorbent was tested for its adsorption efficacy towards the neonicotinoid pesticide acetamiprid. The influence of pH (2-10), temperature (20-45 °C), adsorbent dose (0.2-1.2 g L-1), contact time (5-60 min), and initial pesticide concentration (10-60 mg L-1) on the adsorption process of acetamiprid on BC1 was studied. The adsorption capacity of BC1 was 17.8 mg g-1 under optimum conditions (i.e., 20 mg L-1 initial acetamiprid concentration, pH 8, 1 g L-1 adsorbent dose, 25 °C, and 15 min contact time). The equilibrium data obtained from the adsorption experiment fitted well with the Langmuir isotherm model. We developed an effective nanoporous adsorbent for the recycling of crab shells which can be applied on site with minimal laboratory infrastructure according to local needs.
RESUMEN
Due to the multitude of physiological functions, ferulic acid (FA) has a wide range of applications in the food, cosmetic, and pharmaceutical industries. Thus, the development of rapid, sensitive, and selective detection tools for its assay is of great interest. This study reports a new electroanalytical approach for the quantification of ferulic acid in commercial pharmaceutical samples using a sulphur-doped graphene-based electrochemical sensing platform. The few-layer graphene material (exf-SGR) was prepared by the electrochemical oxidation of graphite, at a low applied bias (5 V), in an inorganic salt mixture of Na2S2O3/(NH4)2SO4 (0.3 M each). According to the morpho-structural characterization of the material, it appears to have a high heteroatom doping degree, as proved by the presence of sulphur lines in the XRD pattern, and the C/S ratio was determined by XPS investigations to be 11.57. The electrochemical performances of a glassy carbon electrode modified with the exf-SGR toward FA detection were tested by cyclic voltammetry in both standard laboratory solutions and real sample analysis. The developed modified electrode showed a low limit of detection (30.3 nM) and excellent stability and reproducibility, proving its potential applicability as a viable solution in FA qualitative and quantitative analysis.
Asunto(s)
Grafito , Grafito/química , Reproducibilidad de los Resultados , Técnicas Electroquímicas , Carbono/química , Electrodos , AzufreRESUMEN
The synthesis of graphene-based materials for drug delivery represents an area of active research, and the use of graphene in drug delivery systems is promising due to its unique properties. Thus, in the present work, we discuss the potential of few-layer graphene in a hydrogel system for dopamine release. The hydrogels are frequently used for these systems for their special physico-chemical properties, which can ensure that the drug is effectively released in time. However, the release from such structures is mostly determined by diffusion alone, and to overcome this restriction, the hydrogel can be "improved" with nanoscale fillers like graphene. The release kinetics of the composite obtained were analyzed to better understand how the use of graphene, instead of the more common graphene oxide (GO) and reduced graphene oxide (rGO), affects the characteristics of the system. Thus, the systems developed in this study consist of three main components: biopolymer, graphene, and dopamine. The hydrogels with graphene were prepared by combining two different solutions, one with polyacrylic acid and agarose and one with graphene prepared by the exfoliation method with microwave irradiation. The drug delivery systems were developed by adding dopamine to the obtained hydrogels. After 24 h of release, the presence of dopamine was observed, demonstrating that the system developed can slow down the drug's degradation because of the interactions with the graphene nanoplates and the polymer matrix.
RESUMEN
While heavy metals (HM) have been considered in recent decades to be the most common and problematic pollutants, the expansion of the list of pollutants due to the active use of carbon nanotubes (CNT) raises new questions about the benefit and harm of HM released to nature individually or fixed on CNT walls. A pot experiment was conducted to compare the effect of two classes of potential pollutants-metal salts of Pb, Mn, Cu, Zn, Cd, and Ni; and functionalized CNTs with COOH, MnO2, Fe3O4, and MnO2-Fe3O4-applied in soil, on the elemental transfer, the bioactive compounds accumulation, and the antioxidant activity in lettuce. While CNTs mainly increased the elemental transfer from soil to leaves, HM salts strongly obstructed it. In the presence of CNTs, the antioxidant activity in lettuce leaves correlated with the transfer of elements from soil to root and from root to leaves. The excess of HMs in soil induced a greater variation of the polyphenols quantity and antioxidant activity than the excess of CNTs. It might be assumed that lettuce perceived HMs as a more aggressive stressor than CNTs and more strongly activated the defense mechanism, showing the reduction of the element transfer and enhancing of total polyphenol production and antioxidant activity.
RESUMEN
Our study aimed to investigate the biological effects of a common-plantain (Plantago major L.) extract, encapsulated in alginate, on dermal human fibroblast cultures in vitro, in view of its potential use as a wound healing adjuvant therapy. Common-plantain extracts were obtained by infusion and ultrasound extraction, and their total polyphenolic content and antioxidant capacity were determined by spectrophotometry. The best extract, which was obtained by infusion, was further encapsulated in sodium alginate in two different formulations. Fourier Transform Infrared Spectroscopy (FTIR) was used to demonstrate the existing interactions in the obtained common-plantain extract in the alginate formulations. The encapsulation efficiency was evaluated based on the total polyphenol content. These alginate gel formulations were further used in vitro to determine their biocompatibility and antioxidant and anti-inflammatory effects by spectrophotometry and ELISA, as well as their ability to stimulate fibroblast migration (scratch test assay) at different time points. In addition, the collagen 1 and 3 levels were determined by Western blot analysis. The data showed that the microencapsulated plantain extract formulations induced an antioxidant, anti-inflammatory effect, enhanced collagen production and increased wound closure in the first 8 h of their application. These results are encouraging for the use of this alginate plantain extract formulation as an adjuvant for skin wound healing.
RESUMEN
The aim of this work was to evaluate the effect of six nanomaterials, namely CNT-COOH, CNT-MnO2, CNT-Fe3O4, CNT-MnO2-Fe3O4, MnO2, and Fe3O4 on lettuceTo determine the impact of nanomaterials on lettuce, the results obtained were compared with those for the control plant, grown in the same conditions of light, temperature, and humidity but without the addition of nanomaterial. The study found that the content of bioactive compounds and the antioxidant capacity varied in the treated plants compared to the control ones, depending on the nanomaterial. The use of CNTs functionalized with metal oxides increases the elemental concentration of lettuce leaves for the majority of the elements. On the contrary, metal oxide nanoparticles and CNT functionalized with carboxyl groups induce a decrease in the concentration of many elements. Soil amending with MnO2 affects the content of more than ten elements in leaves. Simultaneous application of CNT and MnO2 stimulates the elemental translocation of all elements from roots to leaves, but the simultaneous use of CNT and Fe3O4 leads to the most intense translocation compared to the control other than Mo.
RESUMEN
Plant extracts and essential oils have a wide variety of molecules with potential application in different fields such as medicine, the food industry, and cosmetics. Furthermore, these plant derivatives are widely interested in human and animal health, including potent antitumor, antifungal, anti-inflammatory, and bactericidal activity. Given this diversity, different methodologies were needed to optimize the extraction, purification, and characterization of each class of biomolecules. In addition, these plant products can still be used in the synthesis of nanomaterials to reduce the undesirable effects of conventional synthesis routes based on hazardous/toxic chemical reagents and associate the properties of nanomaterials with those present in extracts and essential oils. Vegetable oils and extracts are chemically complex, and although they are already used in the synthesis of nanomaterials, limited studies have examined which molecules are effectively acting in the synthesis and stabilization of these nanostructures. Similarly, few studies have investigated whether the molecules coating the nanomaterials derived from these extracts and essential oils would bring benefits or somehow reduce their potential activity. This synergistic effect presents a promising field to be further explored. Thus, in this review article, we conducted a comprehensive review addressing the main groups of molecules present in plant extracts and essential oils, their extraction capacity, and available methodologies for their characterization. Moreover, we highlighted the potential of these plant products in the synthesis of different metallic nanomaterials and their antimicrobial capacity. Furthermore, we correlated the extract's role in antimicrobial activity, considering the potential synergy between molecules from the plant product and the different metallic forms associated with nanomaterials.
Asunto(s)
Antiinfecciosos , Nanopartículas del Metal , Nanopartículas , Aceites Volátiles , Animales , Humanos , Aceites Volátiles/química , Extractos Vegetales/farmacología , Extractos Vegetales/química , Aceites de Plantas/química , Antiinfecciosos/farmacología , Antibacterianos/química , Nanopartículas del Metal/químicaRESUMEN
The article investigated the antioxidant and antimicrobial activity of extracts from two aromatic plants-Satureja hortensis L. (SE) and Rosmarinus officinalis L. (RE), encapsulated in alginate, on-yogurt properties. The encapsulation efficiency was controlled by FTIR and SEM analysis. In both extracts, the individual polyphenol content was determined by HPLC-DAD-ESI-MS. The total polyphenol content and the antioxidant activity were spectrophotometrically quantified. The antimicrobial properties of SE and RE against gram-positive bacteria (Bacillus cereus, Enterococcus faecalis, Staphylococcus aureus, Geobacillus stearothermophilus), gram-negative bacteria (Escherichia coli, Acinetobacter baumannii, Salmonella abony) and yeasts (Candida albicans) were analyzed in vitro. The encapsulated extracts were used to prepare the functional concentrated yogurt. It was established that the addition of 0.30-0.45% microencapsulated plant extracts caused the inhibition of the post-fermentation process, the improvement of the textural parameters of the yogurt during storage, thus the shelf life of the yogurt increased by seven days, compared to the yogurt simple. Mutual information analysis was applied to establish the correlation between the concentration of the encapsulated extracts on the sensory, physical-chemical, and textural characteristics of the yogurt.
RESUMEN
Heavy metals represent a large category of pollutants. Heavy metals are the focus of researchers around the world, mainly due to their harmful effects on plants. In this paper, the influence of copper, cadmium, manganese, nickel, zinc and lead, present in soil in different concentrations (below the permissible limit, the maximum permissible concentration and a concentration higher than the maximum permissible limit) on lettuce (Lactuca sativa L.) was evaluated. For this purpose, the authors analyzed the variation of photosynthetic pigments, total polyphenols, antioxidant activity and the elemental content in the studied plants. The experimental results showed that the variation of the content of biologically active compounds, elemental content and the antioxidant activity in the plants grown in contaminated soil, compared to the control plants, depends on the type and concentration of the metal added to the soil. The biggest decrease was recorded for plants grown in soil treated with Ni I (-42.38%) for chlorophyll a, Zn II (-32.92%) for chlorophyll b, Ni I (-40.46%) for carotenoids, Pb I (-40.95%) for polyphenols and Cu III (-29.42%) for DPPH. On the other hand, the largest increase regarding the amount of biologically active compounds was registered for Mn I (88.24%) in the case of the chlorophyll a, Mn I (65.56%) for chlorophyll b, Pb I (116.03%) for carotenoids, Ni III (1351.23%) for polyphenols and Ni III (1149.35%) for DPPH.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Lactuca , Clorofila A , Antioxidantes/farmacología , Plomo , Metales Pesados/toxicidad , Metales Pesados/análisis , Suelo/química , Carotenoides , Contaminantes del Suelo/análisisRESUMEN
Different microorganisms are present in nature, some of which are assumed to be hazardous to the human body. It is crucial to control their continuing growth to improve human life. Nanomaterial surface functionalization represents a current topic in continuous evolution that supports the development of new materials with multiple applications in biology, medicine, and the environment. This study focused on the antibacterial activity of different nanocomposites based on functionalized multi-walled carbon nanotubes against four common bacterial strains. Two metal oxides (CuO and NiO) and two antibiotics (azithromycin and ciprofloxacin) were selected for the present study to obtain the following nanocomposites: MWCNT-COOH/Antibiotic, MWCNT-COOH/Fe3O4/Antibiotic, and MWCNT-COOH/Fe3O4/MO/Antibiotic. The present study included two Gram-positive bacteria (Staphylococcus aureus and Enterococcus faecalis) and two Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). Ciprofloxacin (Cip) functionalized materials (MWCNT-COOH/Fe3O4/Cip) were most efficient against all tested bacterial strains; therefore, we conclude that Cu and Ni reduce the effects of Cip. The obtained results indicate that the nanocomposites functionalized with Cip are more effective against selected bacteria strains compared to azithromycin (Azi) functionalized nanocomposites. The current work determined the antibacterial activities of different nanocomposites and gave fresh insights into their manufacture for future research regarding environmental depollution.
RESUMEN
In this study the adsorption and photodegradation capabilities of modified multi-walled carbon nanotubes (MWCNTs), using tartrazine as a model pollutant, is demonstrated. MWCNT-COOH/Fe3O4 and MWCNT-COOH/Fe3O4/NiO nanocomposites were prepared by precipitation of metal oxides in the presence of MWCNTs. Their properties were examined by X-ray diffraction in powder (XRD), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, synchrotron-based Scanning PhotoElectron Microscopy (SPEM), and Brunauer-Emmett-Teller (BET) analysis. It was found that the optimal adsorption conditions were pH 4 for MWCNT-COOH/Fe3O4 and pH 3 for MWCNT-COOH/Fe3O4/NiO, temperature 25 °C, adsorbent dose 1 g L-1, initial concentration of tartrazine 5 mg L-1 for MWCNT-COOH/Fe3O4 and 10 mg L-1 for MWCNT-COOH/Fe3O4/NiO and contact time 5 min for MWCNT-COOH/Fe3O4/NiO and 15 min for MWCNT-COOH/Fe3O4. Moreover, the predominant degradation process was elucidated simultaneously, with and without simulated sunlight irradiation, using thermal lens spectrometry (TLS) and UV-Vis absorption spectrophotometry. The results indicated the prevalence of the photodegradation mechanism over adsorption from the beginning of the degradation process.
RESUMEN
Abiotic stress agents, among them metal stress, can cause oxidative damage to plant cells. In defense, plants can increase the production of secondary metabolites in order to mitigate the harmful effects caused by them. The purpose of this work was to evaluate the effect of two types of copper salts (CuSO4 and Cu(NO3)2), added in two different amounts in soil (150 mg/kg, respectively 300 mg/kg), on assimilating pigments, total polyphenols, antioxidant activity and the elemental composition of wheat. The obtained results were compared with those from control plants grown in the same conditions but without copper salts. The amount of assimilating pigments, total polyphenols, and antioxidant activity respectively increases or decreases in the plants treated with copper salts compared to the control depending on the stage of development of the plant. No significant damage induced in the leaves of the wheat plants treated with the selected salts was observed following the TEM analysis. In six-week-old plants it was observed by EDX analysis that the salts are transformed into nanoparticles. The bioactive compounds, elemental composition and their interaction is influenced by concentration of metal's salt, type of salt and exposure period.
Asunto(s)
Antioxidantes , Triticum , Antioxidantes/metabolismo , Antioxidantes/farmacología , Cobre/farmacología , Estrés Oxidativo , Raíces de Plantas/metabolismo , Polifenoles/metabolismo , Polifenoles/farmacología , Sales (Química)/metabolismo , Sales (Química)/farmacología , Triticum/metabolismoRESUMEN
The article focuses on the optimization of the extraction process of biologically active compounds (BAC) from grape marc-a by-product of the wine industry. The influence of temperature, specifically 30 °C, 45 °C and 65 °C, and ethanol concentration in solutions, specifically 0-96% (v/v) on the extraction yield of polyphenols, flavonoids, tannins and anthocyanins, were investigated. The composition of individual polyphenols, anthocyanins and organic acids, antioxidant activity (DPPH and ABTS) and CIELab chromatic characteristics of the grape marc extracts (GME), were characterized. The microbiostatic and microbicidal effects in direct contact of GME with pathogenic microorganisms, Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Klebsiella pneumoniae, were determined in vitro. The influence of extraction parameters on the total polyphenol content (TPC), total flavonoid content (TFC), tannin content (TC), total anthocyanin content (TAC) and their interdependencies were studied using information analysis. A mathematical model was developed on cubic spline functions. The analysis of individual compounds showed the presence of a wide range of flavonoids (procyanidin B2, procyanidin B1, hyperoside and quercetin), flavones (catechin), hydroxybenzoic acid derivatives (gallic, protocatechuic, p-hydroxybenzoic acids, m-hydroxybenzoic acid, syringic acid), hydroxycinic acid derivatives and ferulic acid methyl ester. The malvidol-3-glucoside was the main anthocyanin identified in the extract. A high amount of tartaric acid was also found. GME showed significant antimicrobial activity against Gram-positive bacteria and lower activity against Gram-negative bacteria.
Asunto(s)
Vitis , Antocianinas/química , Antioxidantes/química , Quimiometría , Flavonoides/análisis , Flavonoides/farmacología , Extractos Vegetales/química , Polifenoles/análisis , Polifenoles/farmacología , Vitis/químicaRESUMEN
The purpose of this study was to evaluate the sun protection factor (SPF) of cosmetic emulsions with the addition of hydroalcoholic apple extract. First, the total polyphenolic content, the antioxidant activity and SPF properties of the extracts obtained by sonication and refluxing were evaluated. The two extraction methods were improved using the central composite design. For cosmetic emulsion that contained a different concentration of apple extract (10-40%), a SPF value between 0.51 and 0.90 was obtained. The most efficient apple extract was obtained by reflux using 50% ethanol and a 60 min extraction time. The concentrated extract was incorporated in a cosmetic emulsion whose SPF maximum was 0.90. Accordingly, due to photoprotective properties, the apple extract can be a candidate for use in cosmetic formulations.
Asunto(s)
Malus , Factor de Protección Solar , Antioxidantes/farmacología , Extractos Vegetales/farmacología , Polifenoles/farmacologíaRESUMEN
The present work aims to follow the influence of TiO2 nanoparticles (TiO2 NPs) on bioactive compounds, the elemental content of wheat, and on wheat leaves' ultrastructure. Synthesized nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and transmission electron microscopy (TEM). The concentration of phenolic compounds, assimilation pigments, antioxidant capacity, elemental content, as well as the ultrastructural changes that may occur in the wheat plants grown in the presence or absence of TiO2 NPs were evaluated. In plants grown in the presence of TiO2 NPs, the amount of assimilating pigments and total polyphenols decreased compared to the control sample, while the antioxidant activity of plants grown in amended soil was higher than those grown in control soil. Following ultrastructural analysis, no significant changes were observed in the leaves of TiO2-treated plants. Application of TiO2 NPs to soil caused a significant reaction of the plant to stress conditions. This was revealed by the increase of antioxidant capacity and the decrease of chlorophyll, total polyphenols, and carotenoids. Besides, the application of TiO2 NPs led to significant positive (K, Zn, Br, and Mo) and negative (Na, Mn, Fe, As, Sr, Sb, and Ba) variation of content.
RESUMEN
The problem of functional foods with bioactive components of natural origin is current for the food industry. Plant extracts rich in polyphenols with antioxidant and antimicrobial activity are a promising source for use in improving the quality and characteristics of fresh meat and meat products. In this context, the purpose of the present study was to evaluate the physico-chemical, microbiological, sensory properties of sausages prepared with the addition of lyophilized extract of basil, thyme or tarragon. For the beginning, the total amount of polyphenols, the antioxidant and antimicrobial activity of the extracts obtained from three spices were evaluated. In the sausages previously infected with Staphylococcus aureus and Escherichia coli it was observed that there is a much larger number of colonies of microorganisms in the control sample compared to the other samples within 24 and 48 h. Moreover, following the addition of sausage extracts, no changes were found regarding their sensory acceptability.
Asunto(s)
Antiinfecciosos/farmacología , Artemisia/química , Microbiología de Alimentos , Productos de la Carne , Ocimum basilicum/química , Extractos Vegetales/farmacología , Satureja/química , Antiinfecciosos/química , Antioxidantes/química , Antioxidantes/farmacología , Fenómenos Químicos , Microbiología de Alimentos/métodos , Conservación de Alimentos/métodos , Conservación de Alimentos/normas , Liofilización , Productos de la Carne/microbiología , Productos de la Carne/normas , Extractos Vegetales/química , Polifenoles/química , Polifenoles/farmacologíaRESUMEN
Persistent pollutants such as pharmaceuticals, pesticides, musk fragrances, and dyes are frequently detected in different environmental compartments and negatively impact the environment and humans. Understanding the impacts of diffuse environmental pollutants on plants is still limited, especially at realistic environmental concentrations of contaminants. We studied the effects of key representatives of two major classes of environmental pollutants (nine different antibiotics and six different textile dyes) on the leaf carotenoid (violaxanthin and neoxanthin) content in wheat (Triticum aestivum L.) using different pollutant concentrations and application times. The wheat plants were watered with solutions of selected environmental pollutants in two different concentrations of 0.5 mg L-1 and 1.5 mg L-1 for one week (0.5 L) and two weeks (1 L). Both categories of pollutants selected for this study negatively influenced the content of violaxanthin and neoxanthin, whereas the textile dyes represented more severe stress to the wheat plants. The results demonstrate that chronic exposure to common diffusively spread environmental contaminants constitutes significant stress to the plants.
Asunto(s)
Antibacterianos/toxicidad , Colorantes/toxicidad , Contaminantes Ambientales/toxicidad , Hojas de la Planta/metabolismo , Triticum/metabolismo , Xantófilas/metabolismoRESUMEN
In the present study, the effects of copper oxide nanoparticles (CuO NPs) on bioactive compounds, the ultrastructural modifications which can occur, and elemental content of wheat were investigated. Changes in the wheat plants grown in presence or absence of CuO NPs were estimated. The application of CuO NPs decreased the amounts of chlorophylls and carotenoids and increased the amounts of polyphenols and antioxidant capacity. Ultrastructural analysis showed that the plants treated with CuO NPs were negatively affected. Soil amending completely inhibited the accumulation of seventeen elements, while K, Br, Al, and Zn were accumulated and Cl, Na, Ba, and Sr content decreased in wheat samples, regardless of the type of NPs applied. The application of chemically obtained NPs induced the most significant changes, completely blocking the assimilation of Fe, Mo, As, Sb, and Sm, and favoring much higher accumulation of Br than biogenic NPs. The decrease in chlorophylls and carotenoids is correlated with increase in antioxidant capacity, and occurs with increase of Mo, Al, Mg, K, Zn, and Ca content. The behavior of total polyphenols is correlated with Br content, and antagonist to Al behavior. From the point of view of bioactive compounds, the most affected plants were those that grew in the presence of CuO-NP-cel, while from the point of view of elementary analysis, the most affected plants were those grown in the presence of CuO-NP. By corroborating the obtained results, it was found that the CuO NPs have a negative effect on wheat plants.
Asunto(s)
Nanopartículas del Metal , Nanopartículas , Cobre/toxicidad , Iones , Nanopartículas del Metal/toxicidad , Nanopartículas/toxicidad , Suelo , TriticumRESUMEN
Objectives: The mechanisms of obesity-associated thyroid dysfunction in children are incompletely deciphered. We aimed to evaluate whether visceral adipose tissue (VAT), insulin resistance (IR), inflammation, oxidative stress (OS) are involved in thyroid morpho-functional changes in pubertal obese children. Methods: We recruited 43 obese pubertal children without history of thyroid pathology. Metabolic and thyroid parameters (visceral fat thickness [VFT], waist/hip ratio [WHR], waist/height ratio [WHtR], insulin, glucose, liver parameters, thyroid stimulation hormone [TSH], free thyroxine [FT4], free triiodothyronine [FT3], thyroid and abdominal ultrasonography) were evaluated. Serum monocyte chemoattractant protein-1 (MCP-1) and malondialdehyde (MDA) levels were quantified as markers of inflammation and OS. Results: VFT correlated positively both with WHR (p= 0.034) and the presence of thyroid nodules (p= 0.036). WHR associated with TSH (p= 0.005), FT3/FT4 (p= 0.033) and was independently associated with FT3/FT4 increase (p< 0.001). HOMA-IR increased with visceral obesity (waist circumference, p= 0.001; WHR, p= 0.018; WHtR: p< 0.001), hepatic impairment (alanine aminotransferase, p= 0.019) and hepatic steatosis (HS; p= 0.013) and correlated positively with FT3/FT4 (p= 0.036). TSH was significantly higher in subjects with HS versus those without HS (p= 0.007) and logistic regression analysis identified TSH as a risk factor for HS (p= 0.014). MDA correlated positively with MCP-1 (p= 0.021). Conclusion: VAT and IR may be responsible for changes in thyroid parameters associated with obesity: elevated TSH, FT3/FT4 levels and increased prevalence of thyroid nodules. WHR was predictive of increased FT3/FT4. In obese children, there is an interdependent relationship between HS and thyroid function.